From: Jakub Jelinek <jakub@redhat.com>
To: Jason Merrill <jason@redhat.com>
Cc: "Joseph S. Myers" <joseph@codesourcery.com>, gcc-patches@gcc.gnu.org
Subject: [PATCH] c++, v2: Implement excess precision support for C++ [PR107097, PR323]
Date: Thu, 13 Oct 2022 18:40:35 +0200 [thread overview]
Message-ID: <Y0g/g0JYbV33TZiW@tucnak> (raw)
In-Reply-To: <f96ebb2a-47f8-7211-8a3c-990bd1263117@redhat.com>
On Wed, Oct 12, 2022 at 02:08:20PM -0400, Jason Merrill wrote:
> > In general I've tried to follow the C99 handling, C11+ relies on the
> > C standard saying that in case of integral conversions excess precision
> > can be used (see PR87390 for more details), but I don't see anything similar
> > on the C++ standard side.
>
> https://eel.is/c++draft/expr#pre-6 seems identical to C99 (apart from a
> stray "the"?); presumably nobody has proposed to copy the N1531
> clarifications. But since those are clarifications, I'd prefer to use our
> C11+ semantics to avoid divergence between the default modes of the C and
> C++ front ends.
Ok, so that it is more readable and say if we decide to make e.g. C++98
behave like C99 and only C++11 and later like C11, I'm sending this as
a 2 patch series, this patch is just an updated version of the previous
patch (your review comments, Marek's mail and missed changes to
doc/invoke.texi) and another mail will be upgrade of this to the C11
behavior.
> > + semantic_result_type
> > + = type_after_usual_arithmetic_conversions (arg2_type, arg3_type);
> > + if (semantic_result_type == error_mark_node
> > + && TREE_CODE (arg2_type) == REAL_TYPE
> > + && TREE_CODE (arg3_type) == REAL_TYPE
> > + && (extended_float_type_p (arg2_type)
> > + || extended_float_type_p (arg3_type))
>
> What if semantic_result_type is error_mark_node and the other conditions
> don't hold? That seems impossible, so maybe the other conditions should
> move into a gcc_checking_assert? (And likewise for result_type below)
Changed in all places to an assert, though previously I missed
that cp_common_type on complex type(s) could have similar problem.
> > @@ -9772,8 +9849,12 @@ build_over_call (struct z_candidate *can
> > return error_mark_node;
> > }
> > else if (magic != 0)
> > - /* For other magic varargs only do decay_conversion. */
> > - a = decay_conversion (a, complain);
> > + {
> > + if (magic == 1 && TREE_CODE (a) == EXCESS_PRECISION_EXPR)
> > + a = TREE_OPERAND (a, 0);
>
> It was confusing me that this mentions 1, and the magic_varargs_p comment
> above mentions 2: Let's add a comment
That is because removing excess precision means keeping
EXCESS_PRECISION_EXPR around and preserving excess precision
means removing of EXCESS_PRECISION_EXPR.
>
> /* Don't truncate excess precision to the semantic type. */
>
> to clarify.
Ok.
Here is an updated patch, bootstrapped/regtested on x86_64-linux and
i686-linux, ok for trunk?
2022-10-13 Jakub Jelinek <jakub@redhat.com>
PR middle-end/323
PR c++/107097
gcc/
* doc/invoke.texi (-fexcess-precision=standard): Mention that the
option now also works in C++.
gcc/c-family/
* c-common.def (EXCESS_PRECISION_EXPR): Remove comment part about
the tree being specific to C/ObjC.
* c-opts.cc (c_common_post_options): Handle flag_excess_precision
in C++ the same as in C.
* c-lex.cc (interpret_float): Set const_type to excess_precision ()
even for C++.
gcc/cp/
* parser.cc (cp_parser_primary_expression): Handle
EXCESS_PRECISION_EXPR with REAL_CST operand the same as REAL_CST.
* cvt.cc (cp_ep_convert_and_check): New function.
* call.cc (build_conditional_expr): Add excess precision support.
When type_after_usual_arithmetic_conversions returns error_mark_node,
use gcc_checking_assert that it is because of uncomparable floating
point ranks instead of checking all those conditions and make it
work also with complex types.
(convert_like_internal): Likewise. Add NESTED_P argument, pass true
to recursive calls to convert_like.
(convert_like): Add NESTED_P argument, pass it through to
convert_like_internal. For other overload pass false to it.
(convert_like_with_context): Pass false to NESTED_P.
(convert_arg_to_ellipsis): Add excess precision support.
(magic_varargs_p): For __builtin_is{finite,inf,inf_sign,nan,normal}
and __builtin_fpclassify return 2 instead of 1, document what it
means.
(build_over_call): Don't handle former magic 2 which is no longer
used, instead for magic 1 remove EXCESS_PRECISION_EXPR.
(perform_direct_initialization_if_possible): Pass false to NESTED_P
convert_like argument.
* constexpr.cc (cxx_eval_constant_expression): Handle
EXCESS_PRECISION_EXPR.
(potential_constant_expression_1): Likewise.
* pt.cc (tsubst_copy, tsubst_copy_and_build): Likewise.
* cp-tree.h (cp_ep_convert_and_check): Declare.
* cp-gimplify.cc (cp_fold): Handle EXCESS_PRECISION_EXPR.
* typeck.cc (cp_common_type): For COMPLEX_TYPEs, return error_mark_node
if recursive call returned it.
(convert_arguments): For magic 1 remove EXCESS_PRECISION_EXPR.
(cp_build_binary_op): Add excess precision support. When
cp_common_type returns error_mark_node, use gcc_checking_assert that
it is because of uncomparable floating point ranks instead of checking
all those conditions and make it work also with complex types.
(cp_build_unary_op): Likewise.
(cp_build_compound_expr): Likewise.
(build_static_cast_1): Remove EXCESS_PRECISION_EXPR.
gcc/testsuite/
* gcc.target/i386/excess-precision-1.c: For C++ wrap abort and
exit declarations into extern "C" block.
* gcc.target/i386/excess-precision-2.c: Likewise.
* gcc.target/i386/excess-precision-3.c: Likewise. Remove
check_float_nonproto and check_double_nonproto tests for C++.
* gcc.target/i386/excess-precision-7.c: For C++ wrap abort and
exit declarations into extern "C" block.
* gcc.target/i386/excess-precision-9.c: Likewise.
* g++.target/i386/excess-precision-1.C: New test.
* g++.target/i386/excess-precision-2.C: New test.
* g++.target/i386/excess-precision-3.C: New test.
* g++.target/i386/excess-precision-4.C: New test.
* g++.target/i386/excess-precision-5.C: New test.
* g++.target/i386/excess-precision-6.C: New test.
* g++.target/i386/excess-precision-7.C: New test.
* g++.target/i386/excess-precision-9.C: New test.
* g++.target/i386/excess-precision-11.C: New test.
* c-c++-common/dfp/convert-bfp-10.c: Add -fexcess-precision=fast
as dg-additional-options.
* c-c++-common/dfp/compare-eq-const.c: Likewise.
* g++.dg/cpp1z/constexpr-96862.C: Likewise.
* g++.dg/cpp1z/decomp12.C (main): Use 2.25 instead of 2.3 to
avoid excess precision differences.
* g++.dg/other/thunk1.C: Add -fexcess-precision=fast
as dg-additional-options.
* g++.dg/vect/pr64410.cc: Likewise.
* g++.dg/cpp1y/pr68180.C: Likewise.
* g++.dg/vect/pr89653.cc: Likewise.
* g++.dg/cpp0x/variadic-tuple.C: Likewise.
* g++.dg/cpp0x/nsdmi-union1.C: Use 4.25 instead of 4.2 to
avoid excess precision differences.
* g++.old-deja/g++.brendan/copy9.C: Add -fexcess-precision=fast
as dg-additional-options.
* g++.old-deja/g++.brendan/overload7.C: Likewise.
--- gcc/doc/invoke.texi.jj 2022-10-12 22:06:36.029279569 +0200
+++ gcc/doc/invoke.texi 2022-10-13 16:49:19.313221247 +0200
@@ -13785,18 +13785,18 @@ default, @option{-fexcess-precision=fast
operations may be carried out in a wider precision than the types specified
in the source if that would result in faster code, and it is unpredictable
when rounding to the types specified in the source code takes place.
-When compiling C, if @option{-fexcess-precision=standard} is specified then
-excess precision follows the rules specified in ISO C99; in particular,
+When compiling C or C++, if @option{-fexcess-precision=standard} is specified
+then excess precision follows the rules specified in ISO C99 or C++; in particular,
both casts and assignments cause values to be rounded to their
semantic types (whereas @option{-ffloat-store} only affects
-assignments). This option is enabled by default for C if a strict
-conformance option such as @option{-std=c99} is used.
+assignments). This option is enabled by default for C or C++ if a strict
+conformance option such as @option{-std=c99} or @option{-std=c++17} is used.
@option{-ffast-math} enables @option{-fexcess-precision=fast} by default
regardless of whether a strict conformance option is used.
@opindex mfpmath
@option{-fexcess-precision=standard} is not implemented for languages
-other than C. On the x86, it has no effect if @option{-mfpmath=sse}
+other than C or C++. On the x86, it has no effect if @option{-mfpmath=sse}
or @option{-mfpmath=sse+387} is specified; in the former case, IEEE
semantics apply without excess precision, and in the latter, rounding
is unpredictable.
--- gcc/c-family/c-common.def.jj 2022-01-11 22:31:40.595769716 +0100
+++ gcc/c-family/c-common.def 2022-10-13 16:44:13.408422330 +0200
@@ -38,10 +38,9 @@ along with GCC; see the file COPYING3.
not. */
DEFTREECODE (C_MAYBE_CONST_EXPR, "c_maybe_const_expr", tcc_expression, 2)
-/* An EXCESS_PRECISION_EXPR, currently only used for C and Objective
- C, represents an expression evaluated in greater range or precision
- than its type. The type of the EXCESS_PRECISION_EXPR is the
- semantic type while the operand represents what is actually being
+/* An EXCESS_PRECISION_EXPR represents an expression evaluated in greater
+ range or precision than its type. The type of the EXCESS_PRECISION_EXPR
+ is the semantic type while the operand represents what is actually being
evaluated. */
DEFTREECODE (EXCESS_PRECISION_EXPR, "excess_precision_expr", tcc_expression, 1)
--- gcc/c-family/c-opts.cc.jj 2022-10-11 14:49:41.396226397 +0200
+++ gcc/c-family/c-opts.cc 2022-10-13 09:35:27.829243895 +0200
@@ -812,17 +812,9 @@ c_common_post_options (const char **pfil
C_COMMON_OVERRIDE_OPTIONS;
#endif
- /* Excess precision other than "fast" requires front-end
- support. */
- if (c_dialect_cxx ())
- {
- if (flag_excess_precision == EXCESS_PRECISION_STANDARD)
- sorry ("%<-fexcess-precision=standard%> for C++");
- flag_excess_precision = EXCESS_PRECISION_FAST;
- }
- else if (flag_excess_precision == EXCESS_PRECISION_DEFAULT)
+ if (flag_excess_precision == EXCESS_PRECISION_DEFAULT)
flag_excess_precision = (flag_iso ? EXCESS_PRECISION_STANDARD
- : EXCESS_PRECISION_FAST);
+ : EXCESS_PRECISION_FAST);
/* ISO C restricts floating-point expression contraction to within
source-language expressions (-ffp-contract=on, currently an alias
--- gcc/c-family/c-lex.cc.jj 2022-10-11 14:49:41.328227329 +0200
+++ gcc/c-family/c-lex.cc 2022-10-13 09:35:27.900242917 +0200
@@ -1008,10 +1008,7 @@ interpret_float (const cpp_token *token,
else
type = double_type_node;
- if (c_dialect_cxx ())
- const_type = NULL_TREE;
- else
- const_type = excess_precision_type (type);
+ const_type = excess_precision_type (type);
if (!const_type)
const_type = type;
--- gcc/cp/parser.cc.jj 2022-10-13 08:40:37.991533161 +0200
+++ gcc/cp/parser.cc 2022-10-13 09:35:27.912242752 +0200
@@ -5583,7 +5583,9 @@ cp_parser_primary_expression (cp_parser
/* Floating-point literals are only allowed in an integral
constant expression if they are cast to an integral or
enumeration type. */
- if (TREE_CODE (token->u.value) == REAL_CST
+ if ((TREE_CODE (token->u.value) == REAL_CST
+ || (TREE_CODE (token->u.value) == EXCESS_PRECISION_EXPR
+ && TREE_CODE (TREE_OPERAND (token->u.value, 0)) == REAL_CST))
&& parser->integral_constant_expression_p
&& pedantic)
{
--- gcc/cp/cvt.cc.jj 2022-10-11 14:49:41.705222167 +0200
+++ gcc/cp/cvt.cc 2022-10-13 09:35:27.956242146 +0200
@@ -684,6 +684,33 @@ cp_convert_and_check (tree type, tree ex
return result;
}
+/* Similarly, but deal with excess precision. SEMANTIC_TYPE is the type this
+ conversion would use without excess precision. If SEMANTIC_TYPE is NULL,
+ this function is equivalent to cp_convert_and_check. This function is
+ a wrapper that handles conversions that may be different than the usual
+ ones because of excess precision. */
+
+tree
+cp_ep_convert_and_check (tree type, tree expr, tree semantic_type,
+ tsubst_flags_t complain)
+{
+ if (TREE_TYPE (expr) == type)
+ return expr;
+ if (expr == error_mark_node)
+ return expr;
+ if (!semantic_type)
+ return cp_convert_and_check (type, expr, complain);
+
+ if (TREE_CODE (TREE_TYPE (expr)) == INTEGER_TYPE
+ && TREE_TYPE (expr) != semantic_type)
+ /* For integers, we need to check the real conversion, not
+ the conversion to the excess precision type. */
+ expr = cp_convert_and_check (semantic_type, expr, complain);
+ /* Result type is the excess precision type, which should be
+ large enough, so do not check. */
+ return cp_convert (type, expr, complain);
+}
+
/* Conversion...
FLAGS indicates how we should behave. */
--- gcc/cp/call.cc.jj 2022-10-13 08:41:04.735165185 +0200
+++ gcc/cp/call.cc 2022-10-13 16:01:37.241523281 +0200
@@ -5359,6 +5359,7 @@ build_conditional_expr (const op_locatio
tree arg3_type;
tree result = NULL_TREE;
tree result_type = NULL_TREE;
+ tree semantic_result_type = NULL_TREE;
bool is_glvalue = true;
struct z_candidate *candidates = 0;
struct z_candidate *cand;
@@ -5392,6 +5393,9 @@ build_conditional_expr (const op_locatio
expression, since it needs to be materialized for the
conversion to bool, so treat it as an xvalue in arg2. */
arg2 = move (TARGET_EXPR_SLOT (arg1));
+ else if (TREE_CODE (arg1) == EXCESS_PRECISION_EXPR)
+ arg2 = arg1 = build1 (EXCESS_PRECISION_EXPR, TREE_TYPE (arg1),
+ cp_save_expr (TREE_OPERAND (arg1, 0)));
else
arg2 = arg1 = cp_save_expr (arg1);
}
@@ -5550,6 +5554,52 @@ build_conditional_expr (const op_locatio
if (error_operand_p (arg1))
return error_mark_node;
+ arg2_type = unlowered_expr_type (arg2);
+ arg3_type = unlowered_expr_type (arg3);
+
+ if ((TREE_CODE (arg2) == EXCESS_PRECISION_EXPR
+ || TREE_CODE (arg3) == EXCESS_PRECISION_EXPR)
+ && (TREE_CODE (arg2_type) == INTEGER_TYPE
+ || TREE_CODE (arg2_type) == REAL_TYPE
+ || TREE_CODE (arg2_type) == COMPLEX_TYPE)
+ && (TREE_CODE (arg3_type) == INTEGER_TYPE
+ || TREE_CODE (arg3_type) == REAL_TYPE
+ || TREE_CODE (arg3_type) == COMPLEX_TYPE))
+ {
+ semantic_result_type
+ = type_after_usual_arithmetic_conversions (arg2_type, arg3_type);
+ if (semantic_result_type == error_mark_node)
+ {
+ tree t1 = arg2_type;
+ tree t2 = arg3_type;
+ if (TREE_CODE (t1) == COMPLEX_TYPE)
+ t1 = TREE_TYPE (t1);
+ if (TREE_CODE (t2) == COMPLEX_TYPE)
+ t2 = TREE_TYPE (t2);
+ gcc_checking_assert (TREE_CODE (t1) == REAL_TYPE
+ && TREE_CODE (t2) == REAL_TYPE
+ && (extended_float_type_p (t1)
+ || extended_float_type_p (t2))
+ && cp_compare_floating_point_conversion_ranks
+ (t1, t2) == 3);
+ if (complain & tf_error)
+ error_at (loc, "operands to %<?:%> of types %qT and %qT "
+ "have unordered conversion rank",
+ arg2_type, arg3_type);
+ return error_mark_node;
+ }
+ if (TREE_CODE (arg2) == EXCESS_PRECISION_EXPR)
+ {
+ arg2 = TREE_OPERAND (arg2, 0);
+ arg2_type = TREE_TYPE (arg2);
+ }
+ if (TREE_CODE (arg3) == EXCESS_PRECISION_EXPR)
+ {
+ arg3 = TREE_OPERAND (arg3, 0);
+ arg3_type = TREE_TYPE (arg3);
+ }
+ }
+
/* [expr.cond]
If either the second or the third operand has type (possibly
@@ -5557,8 +5607,6 @@ build_conditional_expr (const op_locatio
array-to-pointer (_conv.array_), and function-to-pointer
(_conv.func_) standard conversions are performed on the second
and third operands. */
- arg2_type = unlowered_expr_type (arg2);
- arg3_type = unlowered_expr_type (arg3);
if (VOID_TYPE_P (arg2_type) || VOID_TYPE_P (arg3_type))
{
/* 'void' won't help in resolving an overloaded expression on the
@@ -5850,14 +5898,20 @@ build_conditional_expr (const op_locatio
/* In this case, there is always a common type. */
result_type = type_after_usual_arithmetic_conversions (arg2_type,
arg3_type);
- if (result_type == error_mark_node
- && TREE_CODE (arg2_type) == REAL_TYPE
- && TREE_CODE (arg3_type) == REAL_TYPE
- && (extended_float_type_p (arg2_type)
- || extended_float_type_p (arg3_type))
- && cp_compare_floating_point_conversion_ranks (arg2_type,
- arg3_type) == 3)
+ if (result_type == error_mark_node)
{
+ tree t1 = arg2_type;
+ tree t2 = arg3_type;
+ if (TREE_CODE (t1) == COMPLEX_TYPE)
+ t1 = TREE_TYPE (t1);
+ if (TREE_CODE (t2) == COMPLEX_TYPE)
+ t2 = TREE_TYPE (t2);
+ gcc_checking_assert (TREE_CODE (t1) == REAL_TYPE
+ && TREE_CODE (t2) == REAL_TYPE
+ && (extended_float_type_p (t1)
+ || extended_float_type_p (t2))
+ && cp_compare_floating_point_conversion_ranks
+ (t1, t2) == 3);
if (complain & tf_error)
error_at (loc, "operands to %<?:%> of types %qT and %qT "
"have unordered conversion rank",
@@ -5922,6 +5976,10 @@ build_conditional_expr (const op_locatio
}
}
+ if (semantic_result_type && INTEGRAL_TYPE_P (arg2_type))
+ arg2 = perform_implicit_conversion (semantic_result_type, arg2, complain);
+ else if (semantic_result_type && INTEGRAL_TYPE_P (arg3_type))
+ arg3 = perform_implicit_conversion (semantic_result_type, arg3, complain);
arg2 = perform_implicit_conversion (result_type, arg2, complain);
arg3 = perform_implicit_conversion (result_type, arg3, complain);
}
@@ -6009,9 +6067,15 @@ build_conditional_expr (const op_locatio
/* If this expression is an rvalue, but might be mistaken for an
lvalue, we must add a NON_LVALUE_EXPR. */
result = rvalue (result);
+ if (semantic_result_type)
+ result = build1 (EXCESS_PRECISION_EXPR, semantic_result_type,
+ result);
}
else
- result = force_paren_expr (result);
+ {
+ result = force_paren_expr (result);
+ gcc_assert (semantic_result_type == NULL_TREE);
+ }
return result;
}
@@ -7875,7 +7939,7 @@ maybe_warn_array_conv (location_t loc, c
}
/* We call this recursively in convert_like_internal. */
-static tree convert_like (conversion *, tree, tree, int, bool, bool,
+static tree convert_like (conversion *, tree, tree, int, bool, bool, bool,
tsubst_flags_t);
/* Perform the conversions in CONVS on the expression EXPR. FN and
@@ -7891,7 +7955,7 @@ static tree convert_like (conversion *,
static tree
convert_like_internal (conversion *convs, tree expr, tree fn, int argnum,
bool issue_conversion_warnings, bool c_cast_p,
- tsubst_flags_t complain)
+ bool nested_p, tsubst_flags_t complain)
{
tree totype = convs->type;
diagnostic_t diag_kind;
@@ -7968,7 +8032,8 @@ convert_like_internal (conversion *convs
print_z_candidate (loc, N_("candidate is:"), t->cand);
expr = convert_like (t, expr, fn, argnum,
/*issue_conversion_warnings=*/false,
- /*c_cast_p=*/false, complain);
+ /*c_cast_p=*/false, /*nested_p=*/true,
+ complain);
if (convs->kind == ck_ref_bind)
expr = convert_to_reference (totype, expr, CONV_IMPLICIT,
LOOKUP_NORMAL, NULL_TREE,
@@ -7983,13 +8048,15 @@ convert_like_internal (conversion *convs
{
expr = convert_like (t, expr, fn, argnum,
/*issue_conversion_warnings=*/false,
- /*c_cast_p=*/false, complain);
+ /*c_cast_p=*/false, /*nested_p=*/true,
+ complain);
break;
}
else if (t->kind == ck_ambig)
return convert_like (t, expr, fn, argnum,
/*issue_conversion_warnings=*/false,
- /*c_cast_p=*/false, complain);
+ /*c_cast_p=*/false, /*nested_p=*/true,
+ complain);
else if (t->kind == ck_identity)
break;
}
@@ -8109,6 +8176,8 @@ convert_like_internal (conversion *convs
if (type_unknown_p (expr))
expr = instantiate_type (totype, expr, complain);
+ if (!nested_p && TREE_CODE (expr) == EXCESS_PRECISION_EXPR)
+ expr = cp_convert (totype, TREE_OPERAND (expr, 0), complain);
if (expr == null_node
&& INTEGRAL_OR_UNSCOPED_ENUMERATION_TYPE_P (totype))
/* If __null has been converted to an integer type, we do not want to
@@ -8148,7 +8217,8 @@ convert_like_internal (conversion *convs
FOR_EACH_CONSTRUCTOR_VALUE (CONSTRUCTOR_ELTS (expr), ix, val)
{
tree sub = convert_like (convs->u.list[ix], val, fn,
- argnum, false, false, complain);
+ argnum, false, false,
+ /*nested_p=*/true, complain);
if (sub == error_mark_node)
return sub;
if (!BRACE_ENCLOSED_INITIALIZER_P (val)
@@ -8216,7 +8286,7 @@ convert_like_internal (conversion *convs
expr = convert_like (next_conversion (convs), expr, fn, argnum,
convs->kind == ck_ref_bind
? issue_conversion_warnings : false,
- c_cast_p, complain & ~tf_no_cleanup);
+ c_cast_p, /*nested_p=*/true, complain & ~tf_no_cleanup);
if (expr == error_mark_node)
return error_mark_node;
@@ -8475,7 +8545,15 @@ convert_like_internal (conversion *convs
return error_mark_node;
warning_sentinel w (warn_zero_as_null_pointer_constant);
- if (issue_conversion_warnings)
+ if (TREE_CODE (expr) == EXCESS_PRECISION_EXPR)
+ {
+ if (issue_conversion_warnings)
+ expr = cp_ep_convert_and_check (totype, TREE_OPERAND (expr, 0),
+ TREE_TYPE (expr), complain);
+ else
+ expr = cp_convert (totype, TREE_OPERAND (expr, 0), complain);
+ }
+ else if (issue_conversion_warnings)
expr = cp_convert_and_check (totype, expr, complain);
else
expr = cp_convert (totype, expr, complain);
@@ -8509,7 +8587,7 @@ conv_unsafe_in_template_p (tree to, tree
static tree
convert_like (conversion *convs, tree expr, tree fn, int argnum,
- bool issue_conversion_warnings, bool c_cast_p,
+ bool issue_conversion_warnings, bool c_cast_p, bool nested_p,
tsubst_flags_t complain)
{
/* Creating &TARGET_EXPR<> in a template breaks when substituting,
@@ -8532,7 +8610,8 @@ convert_like (conversion *convs, tree ex
error_mark_node. */
}
expr = convert_like_internal (convs, expr, fn, argnum,
- issue_conversion_warnings, c_cast_p, complain);
+ issue_conversion_warnings, c_cast_p,
+ nested_p, complain);
if (expr == error_mark_node)
return error_mark_node;
return conv_expr ? conv_expr : expr;
@@ -8545,7 +8624,7 @@ convert_like (conversion *convs, tree ex
{
return convert_like (convs, expr, NULL_TREE, 0,
/*issue_conversion_warnings=*/true,
- /*c_cast_p=*/false, complain);
+ /*c_cast_p=*/false, /*nested_p=*/false, complain);
}
/* Convenience wrapper for convert_like. */
@@ -8556,7 +8635,7 @@ convert_like_with_context (conversion *c
{
return convert_like (convs, expr, fn, argnum,
/*issue_conversion_warnings=*/true,
- /*c_cast_p=*/false, complain);
+ /*c_cast_p=*/false, /*nested_p=*/false, complain);
}
/* ARG is being passed to a varargs function. Perform any conversions
@@ -8587,6 +8666,8 @@ convert_arg_to_ellipsis (tree arg, tsubs
"implicit conversion from %qH to %qI when passing "
"argument to function",
arg_type, double_type_node);
+ if (TREE_CODE (arg) == EXCESS_PRECISION_EXPR)
+ arg = TREE_OPERAND (arg, 0);
arg = mark_rvalue_use (arg);
arg = convert_to_real_nofold (double_type_node, arg);
}
@@ -8893,9 +8974,9 @@ convert_for_arg_passing (tree type, tree
/* Returns non-zero iff FN is a function with magic varargs, i.e. ones for
which just decay_conversion or no conversions at all should be done.
This is true for some builtins which don't act like normal functions.
- Return 2 if no conversions at all should be done, 1 if just
- decay_conversion. Return 3 for special treatment of the 3rd argument
- for __builtin_*_overflow_p. */
+ Return 2 if just decay_conversion and removal of excess precision should
+ be done, 1 if just decay_conversion. Return 3 for special treatment of
+ the 3rd argument for __builtin_*_overflow_p. */
int
magic_varargs_p (tree fn)
@@ -8914,7 +8995,15 @@ magic_varargs_p (tree fn)
case BUILT_IN_MUL_OVERFLOW_P:
return 3;
- default:;
+ case BUILT_IN_ISFINITE:
+ case BUILT_IN_ISINF:
+ case BUILT_IN_ISINF_SIGN:
+ case BUILT_IN_ISNAN:
+ case BUILT_IN_ISNORMAL:
+ case BUILT_IN_FPCLASSIFY:
+ return 2;
+
+ default:
return lookup_attribute ("type generic",
TYPE_ATTRIBUTES (TREE_TYPE (fn))) != 0;
}
@@ -9717,7 +9806,7 @@ build_over_call (struct z_candidate *can
for (; arg_index < vec_safe_length (args); ++arg_index)
{
tree a = (*args)[arg_index];
- if ((magic == 3 && arg_index == 2) || magic == 2)
+ if (magic == 3 && arg_index == 2)
{
/* Do no conversions for certain magic varargs. */
a = mark_type_use (a);
@@ -9725,8 +9814,13 @@ build_over_call (struct z_candidate *can
return error_mark_node;
}
else if (magic != 0)
- /* For other magic varargs only do decay_conversion. */
- a = decay_conversion (a, complain);
+ {
+ /* Don't truncate excess precision to the semantic type. */
+ if (magic == 1 && TREE_CODE (a) == EXCESS_PRECISION_EXPR)
+ a = TREE_OPERAND (a, 0);
+ /* For other magic varargs only do decay_conversion. */
+ a = decay_conversion (a, complain);
+ }
else if (DECL_CONSTRUCTOR_P (fn)
&& same_type_ignoring_top_level_qualifiers_p (DECL_CONTEXT (fn),
TREE_TYPE (a)))
@@ -13004,7 +13098,7 @@ perform_direct_initialization_if_possibl
else
expr = convert_like (conv, expr, NULL_TREE, 0,
/*issue_conversion_warnings=*/false,
- c_cast_p, complain);
+ c_cast_p, /*nested_p=*/false, complain);
/* Free all the conversions we allocated. */
obstack_free (&conversion_obstack, p);
--- gcc/cp/constexpr.cc.jj 2022-10-12 17:51:00.909944772 +0200
+++ gcc/cp/constexpr.cc 2022-10-13 09:35:27.989241691 +0200
@@ -7598,6 +7598,19 @@ cxx_eval_constant_expression (const cons
}
break;
+ case EXCESS_PRECISION_EXPR:
+ {
+ tree oldop = TREE_OPERAND (t, 0);
+
+ tree op = cxx_eval_constant_expression (ctx, oldop,
+ lval,
+ non_constant_p, overflow_p);
+ if (*non_constant_p)
+ return t;
+ r = fold_convert (TREE_TYPE (t), op);
+ break;
+ }
+
case EMPTY_CLASS_EXPR:
/* Handle EMPTY_CLASS_EXPR produced by build_call_a by lowering
it to an appropriate CONSTRUCTOR. */
@@ -8898,6 +8911,9 @@ potential_constant_expression_1 (tree t,
sub-object of such an object; */
return RECUR (TREE_OPERAND (t, 0), rval);
+ case EXCESS_PRECISION_EXPR:
+ return RECUR (TREE_OPERAND (t, 0), rval);
+
case VAR_DECL:
if (DECL_HAS_VALUE_EXPR_P (t))
{
--- gcc/cp/pt.cc.jj 2022-10-13 08:40:38.010532899 +0200
+++ gcc/cp/pt.cc 2022-10-13 09:46:41.112966988 +0200
@@ -17412,6 +17412,15 @@ tsubst_copy (tree t, tree args, tsubst_f
return r;
}
+ case EXCESS_PRECISION_EXPR:
+ {
+ tree type = tsubst (TREE_TYPE (t), args, complain, in_decl);
+ tree op0 = tsubst_copy (TREE_OPERAND (t, 0), args, complain, in_decl);
+ if (TREE_CODE (op0) == EXCESS_PRECISION_EXPR)
+ return op0;
+ return build1_loc (EXPR_LOCATION (t), code, type, op0);
+ }
+
case COMPONENT_REF:
{
tree object;
@@ -20440,6 +20449,16 @@ tsubst_copy_and_build (tree t,
templated_operator_saved_lookups (t),
complain|decltype_flag));
+ case EXCESS_PRECISION_EXPR:
+ {
+ tree type = tsubst (TREE_TYPE (t), args, complain, in_decl);
+ tree op0 = RECUR (TREE_OPERAND (t, 0));
+ if (TREE_CODE (op0) == EXCESS_PRECISION_EXPR)
+ RETURN (op0);
+ RETURN (build1_loc (EXPR_LOCATION (t), EXCESS_PRECISION_EXPR,
+ type, op0));
+ }
+
case FIX_TRUNC_EXPR:
/* convert_like should have created an IMPLICIT_CONV_EXPR. */
gcc_unreachable ();
--- gcc/cp/cp-tree.h.jj 2022-10-13 08:41:04.737165157 +0200
+++ gcc/cp/cp-tree.h 2022-10-13 09:35:27.999241554 +0200
@@ -6793,6 +6793,8 @@ extern tree ocp_convert (tree, tree,
tsubst_flags_t);
extern tree cp_convert (tree, tree, tsubst_flags_t);
extern tree cp_convert_and_check (tree, tree, tsubst_flags_t);
+extern tree cp_ep_convert_and_check (tree, tree, tree,
+ tsubst_flags_t);
extern tree cp_fold_convert (tree, tree);
extern tree cp_get_callee (tree);
extern tree cp_get_callee_fndecl (tree);
--- gcc/cp/cp-gimplify.cc.jj 2022-10-13 08:40:37.954533670 +0200
+++ gcc/cp/cp-gimplify.cc 2022-10-13 09:35:28.000241540 +0200
@@ -2515,6 +2515,11 @@ cp_fold (tree x)
break;
+ case EXCESS_PRECISION_EXPR:
+ op0 = cp_fold_maybe_rvalue (TREE_OPERAND (x, 0), rval_ops);
+ x = fold_convert_loc (EXPR_LOCATION (x), TREE_TYPE (x), op0);
+ break;
+
case INDIRECT_REF:
/* We don't need the decltype(auto) obfuscation anymore. */
if (REF_PARENTHESIZED_P (x))
--- gcc/cp/typeck.cc.jj 2022-10-13 08:41:04.780164565 +0200
+++ gcc/cp/typeck.cc 2022-10-13 18:36:08.223309058 +0200
@@ -439,6 +439,8 @@ cp_common_type (tree t1, tree t2)
tree subtype
= type_after_usual_arithmetic_conversions (subtype1, subtype2);
+ if (subtype == error_mark_node)
+ return subtype;
if (code1 == COMPLEX_TYPE && TREE_TYPE (t1) == subtype)
return build_type_attribute_variant (t1, attributes);
else if (code2 == COMPLEX_TYPE && TREE_TYPE (t2) == subtype)
@@ -4603,11 +4605,17 @@ convert_arguments (tree typelist, vec<tr
}
else
{
- if (fndecl && magic_varargs_p (fndecl))
- /* Don't do ellipsis conversion for __built_in_constant_p
- as this will result in spurious errors for non-trivial
- types. */
- val = require_complete_type (val, complain);
+ int magic = fndecl ? magic_varargs_p (fndecl) : 0;
+ if (magic)
+ {
+ /* Don't truncate excess precision to the semantic type. */
+ if (magic == 1 && TREE_CODE (val) == EXCESS_PRECISION_EXPR)
+ val = TREE_OPERAND (val, 0);
+ /* Don't do ellipsis conversion for __built_in_constant_p
+ as this will result in spurious errors for non-trivial
+ types. */
+ val = require_complete_type (val, complain);
+ }
else
val = convert_arg_to_ellipsis (val, complain);
@@ -5057,7 +5065,7 @@ cp_build_binary_op (const op_location_t
{
tree op0, op1;
enum tree_code code0, code1;
- tree type0, type1;
+ tree type0, type1, orig_type0, orig_type1;
const char *invalid_op_diag;
/* Expression code to give to the expression when it is built.
@@ -5069,6 +5077,10 @@ cp_build_binary_op (const op_location_t
In the simplest cases this is the common type of the arguments. */
tree result_type = NULL_TREE;
+ /* When the computation is in excess precision, the type of the
+ final EXCESS_PRECISION_EXPR. */
+ tree semantic_result_type = NULL;
+
/* Nonzero means operands have already been type-converted
in whatever way is necessary.
Zero means they need to be converted to RESULT_TYPE. */
@@ -5116,6 +5128,10 @@ cp_build_binary_op (const op_location_t
/* Tree holding instrumentation expression. */
tree instrument_expr = NULL_TREE;
+ /* True means this is an arithmetic operation that may need excess
+ precision. */
+ bool may_need_excess_precision;
+
/* Apply default conversions. */
op0 = resolve_nondeduced_context (orig_op0, complain);
op1 = resolve_nondeduced_context (orig_op1, complain);
@@ -5167,8 +5183,8 @@ cp_build_binary_op (const op_location_t
}
}
- type0 = TREE_TYPE (op0);
- type1 = TREE_TYPE (op1);
+ orig_type0 = type0 = TREE_TYPE (op0);
+ orig_type1 = type1 = TREE_TYPE (op1);
/* The expression codes of the data types of the arguments tell us
whether the arguments are integers, floating, pointers, etc. */
@@ -5201,6 +5217,47 @@ cp_build_binary_op (const op_location_t
return error_mark_node;
}
+ switch (code)
+ {
+ case PLUS_EXPR:
+ case MINUS_EXPR:
+ case MULT_EXPR:
+ case TRUNC_DIV_EXPR:
+ case CEIL_DIV_EXPR:
+ case FLOOR_DIV_EXPR:
+ case ROUND_DIV_EXPR:
+ case EXACT_DIV_EXPR:
+ may_need_excess_precision = true;
+ break;
+ default:
+ may_need_excess_precision = false;
+ break;
+ }
+ if (TREE_CODE (op0) == EXCESS_PRECISION_EXPR)
+ {
+ op0 = TREE_OPERAND (op0, 0);
+ type0 = TREE_TYPE (op0);
+ }
+ else if (may_need_excess_precision
+ && (code0 == REAL_TYPE || code0 == COMPLEX_TYPE))
+ if (tree eptype = excess_precision_type (type0))
+ {
+ type0 = eptype;
+ op0 = convert (eptype, op0);
+ }
+ if (TREE_CODE (op1) == EXCESS_PRECISION_EXPR)
+ {
+ op1 = TREE_OPERAND (op1, 0);
+ type1 = TREE_TYPE (op1);
+ }
+ else if (may_need_excess_precision
+ && (code1 == REAL_TYPE || code1 == COMPLEX_TYPE))
+ if (tree eptype = excess_precision_type (type1))
+ {
+ type1 = eptype;
+ op1 = convert (eptype, op1);
+ }
+
/* Issue warnings about peculiar, but valid, uses of NULL. */
if ((null_node_p (orig_op0) || null_node_p (orig_op1))
/* It's reasonable to use pointer values as operands of &&
@@ -5240,7 +5297,7 @@ cp_build_binary_op (const op_location_t
op0 = convert (TREE_TYPE (type1), op0);
op0 = save_expr (op0);
op0 = build_vector_from_val (type1, op0);
- type0 = TREE_TYPE (op0);
+ orig_type0 = type0 = TREE_TYPE (op0);
code0 = TREE_CODE (type0);
converted = 1;
break;
@@ -5250,7 +5307,7 @@ cp_build_binary_op (const op_location_t
op1 = convert (TREE_TYPE (type0), op1);
op1 = save_expr (op1);
op1 = build_vector_from_val (type0, op1);
- type1 = TREE_TYPE (op1);
+ orig_type1 = type1 = TREE_TYPE (op1);
code1 = TREE_CODE (type1);
converted = 1;
break;
@@ -6067,12 +6124,20 @@ cp_build_binary_op (const op_location_t
&& (shorten || common || short_compare))
{
result_type = cp_common_type (type0, type1);
- if (result_type == error_mark_node
- && code0 == REAL_TYPE
- && code1 == REAL_TYPE
- && (extended_float_type_p (type0) || extended_float_type_p (type1))
- && cp_compare_floating_point_conversion_ranks (type0, type1) == 3)
+ if (result_type == error_mark_node)
{
+ tree t1 = type0;
+ tree t2 = type1;
+ if (TREE_CODE (t1) == COMPLEX_TYPE)
+ t1 = TREE_TYPE (t1);
+ if (TREE_CODE (t2) == COMPLEX_TYPE)
+ t2 = TREE_TYPE (t2);
+ gcc_checking_assert (TREE_CODE (t1) == REAL_TYPE
+ && TREE_CODE (t2) == REAL_TYPE
+ && (extended_float_type_p (t1)
+ || extended_float_type_p (t2))
+ && cp_compare_floating_point_conversion_ranks
+ (t1, t2) == 3);
if (complain & tf_error)
{
rich_location richloc (line_table, location);
@@ -6091,6 +6156,33 @@ cp_build_binary_op (const op_location_t
TREE_TYPE (orig_op1));
}
}
+ if (may_need_excess_precision
+ && (orig_type0 != type0 || orig_type1 != type1))
+ {
+ gcc_assert (common);
+ semantic_result_type = cp_common_type (orig_type0, orig_type1);
+ if (semantic_result_type == error_mark_node)
+ {
+ tree t1 = orig_type0;
+ tree t2 = orig_type1;
+ if (TREE_CODE (t1) == COMPLEX_TYPE)
+ t1 = TREE_TYPE (t1);
+ if (TREE_CODE (t2) == COMPLEX_TYPE)
+ t2 = TREE_TYPE (t2);
+ gcc_checking_assert (TREE_CODE (t1) == REAL_TYPE
+ && TREE_CODE (t2) == REAL_TYPE
+ && (extended_float_type_p (t1)
+ || extended_float_type_p (t2))
+ && cp_compare_floating_point_conversion_ranks
+ (t1, t2) == 3);
+ if (complain & tf_error)
+ {
+ rich_location richloc (line_table, location);
+ binary_op_error (&richloc, code, type0, type1);
+ }
+ return error_mark_node;
+ }
+ }
if (code == SPACESHIP_EXPR)
{
@@ -6181,6 +6273,8 @@ cp_build_binary_op (const op_location_t
build_type ? build_type : result_type,
NULL_TREE, op1);
TREE_OPERAND (tmp, 0) = op0;
+ if (semantic_result_type)
+ tmp = build1 (EXCESS_PRECISION_EXPR, semantic_result_type, tmp);
return tmp;
}
@@ -6268,6 +6362,9 @@ cp_build_binary_op (const op_location_t
}
}
result = build2 (COMPLEX_EXPR, result_type, real, imag);
+ if (semantic_result_type)
+ result = build1 (EXCESS_PRECISION_EXPR, semantic_result_type,
+ result);
return result;
}
@@ -6363,9 +6460,11 @@ cp_build_binary_op (const op_location_t
{
warning_sentinel w (warn_sign_conversion, short_compare);
if (!same_type_p (TREE_TYPE (op0), result_type))
- op0 = cp_convert_and_check (result_type, op0, complain);
+ op0 = cp_ep_convert_and_check (result_type, op0,
+ semantic_result_type, complain);
if (!same_type_p (TREE_TYPE (op1), result_type))
- op1 = cp_convert_and_check (result_type, op1, complain);
+ op1 = cp_ep_convert_and_check (result_type, op1,
+ semantic_result_type, complain);
if (op0 == error_mark_node || op1 == error_mark_node)
return error_mark_node;
@@ -6435,6 +6534,9 @@ cp_build_binary_op (const op_location_t
if (resultcode == SPACESHIP_EXPR && !processing_template_decl)
result = get_target_expr (result, complain);
+ if (semantic_result_type)
+ result = build1 (EXCESS_PRECISION_EXPR, semantic_result_type, result);
+
if (!c_inhibit_evaluation_warnings)
{
if (!processing_template_decl)
@@ -7161,6 +7263,7 @@ cp_build_unary_op (enum tree_code code,
tree arg = xarg;
location_t location = cp_expr_loc_or_input_loc (arg);
tree argtype = 0;
+ tree eptype = NULL_TREE;
const char *errstring = NULL;
tree val;
const char *invalid_op_diag;
@@ -7181,6 +7284,12 @@ cp_build_unary_op (enum tree_code code,
return error_mark_node;
}
+ if (TREE_CODE (arg) == EXCESS_PRECISION_EXPR)
+ {
+ eptype = TREE_TYPE (arg);
+ arg = TREE_OPERAND (arg, 0);
+ }
+
switch (code)
{
case UNARY_PLUS_EXPR:
@@ -7276,8 +7385,11 @@ cp_build_unary_op (enum tree_code code,
case REALPART_EXPR:
case IMAGPART_EXPR:
- arg = build_real_imag_expr (input_location, code, arg);
- return arg;
+ val = build_real_imag_expr (input_location, code, arg);
+ if (eptype && TREE_CODE (eptype) == COMPLEX_EXPR)
+ val = build1_loc (input_location, EXCESS_PRECISION_EXPR,
+ TREE_TYPE (eptype), val);
+ return val;
case PREINCREMENT_EXPR:
case POSTINCREMENT_EXPR:
@@ -7288,7 +7400,7 @@ cp_build_unary_op (enum tree_code code,
val = unary_complex_lvalue (code, arg);
if (val != 0)
- return val;
+ goto return_build_unary_op;
arg = mark_lvalue_use (arg);
@@ -7304,8 +7416,8 @@ cp_build_unary_op (enum tree_code code,
real = cp_build_unary_op (code, real, true, complain);
if (real == error_mark_node || imag == error_mark_node)
return error_mark_node;
- return build2 (COMPLEX_EXPR, TREE_TYPE (arg),
- real, imag);
+ val = build2 (COMPLEX_EXPR, TREE_TYPE (arg), real, imag);
+ goto return_build_unary_op;
}
/* Report invalid types. */
@@ -7468,7 +7580,7 @@ cp_build_unary_op (enum tree_code code,
val = build2 (code, TREE_TYPE (arg), arg, inc);
TREE_SIDE_EFFECTS (val) = 1;
- return val;
+ goto return_build_unary_op;
}
case ADDR_EXPR:
@@ -7484,7 +7596,11 @@ cp_build_unary_op (enum tree_code code,
{
if (argtype == 0)
argtype = TREE_TYPE (arg);
- return build1 (code, argtype, arg);
+ val = build1 (code, argtype, arg);
+ return_build_unary_op:
+ if (eptype)
+ val = build1 (EXCESS_PRECISION_EXPR, eptype, val);
+ return val;
}
if (complain & tf_error)
@@ -7875,6 +7991,15 @@ cp_build_compound_expr (tree lhs, tree r
if (lhs == error_mark_node || rhs == error_mark_node)
return error_mark_node;
+ if (TREE_CODE (lhs) == EXCESS_PRECISION_EXPR)
+ lhs = TREE_OPERAND (lhs, 0);
+ tree eptype = NULL_TREE;
+ if (TREE_CODE (rhs) == EXCESS_PRECISION_EXPR)
+ {
+ eptype = TREE_TYPE (rhs);
+ rhs = TREE_OPERAND (rhs, 0);
+ }
+
if (TREE_CODE (rhs) == TARGET_EXPR)
{
/* If the rhs is a TARGET_EXPR, then build the compound
@@ -7885,6 +8010,8 @@ cp_build_compound_expr (tree lhs, tree r
init = build2 (COMPOUND_EXPR, TREE_TYPE (init), lhs, init);
TREE_OPERAND (rhs, 1) = init;
+ if (eptype)
+ rhs = build1 (EXCESS_PRECISION_EXPR, eptype, rhs);
return rhs;
}
@@ -7896,7 +8023,10 @@ cp_build_compound_expr (tree lhs, tree r
return error_mark_node;
}
- return build2 (COMPOUND_EXPR, TREE_TYPE (rhs), lhs, rhs);
+ tree ret = build2 (COMPOUND_EXPR, TREE_TYPE (rhs), lhs, rhs);
+ if (eptype)
+ ret = build1 (EXCESS_PRECISION_EXPR, eptype, ret);
+ return ret;
}
/* Issue a diagnostic message if casting from SRC_TYPE to DEST_TYPE
@@ -8180,7 +8310,11 @@ build_static_cast_1 (location_t loc, tre
Any expression can be explicitly converted to type cv void. */
if (VOID_TYPE_P (type))
- return convert_to_void (expr, ICV_CAST, complain);
+ {
+ if (TREE_CODE (expr) == EXCESS_PRECISION_EXPR)
+ expr = TREE_OPERAND (expr, 0);
+ return convert_to_void (expr, ICV_CAST, complain);
+ }
/* [class.abstract]
An abstract class shall not be used ... as the type of an explicit
@@ -8259,6 +8393,8 @@ build_static_cast_1 (location_t loc, tre
{
if (processing_template_decl)
return expr;
+ if (TREE_CODE (expr) == EXCESS_PRECISION_EXPR)
+ expr = TREE_OPERAND (expr, 0);
return ocp_convert (type, expr, CONV_C_CAST, LOOKUP_NORMAL, complain);
}
--- gcc/testsuite/gcc.target/i386/excess-precision-1.c.jj 2022-10-11 14:49:42.367213104 +0200
+++ gcc/testsuite/gcc.target/i386/excess-precision-1.c 2022-10-13 09:35:28.016241320 +0200
@@ -5,8 +5,14 @@
#include <float.h>
+#ifdef __cplusplus
+extern "C" {
+#endif
extern void abort (void);
extern void exit (int);
+#ifdef __cplusplus
+}
+#endif
volatile float f1 = 1.0f;
volatile float f2 = 0x1.0p-30f;
--- gcc/testsuite/gcc.target/i386/excess-precision-2.c.jj 2022-10-11 14:49:42.439212118 +0200
+++ gcc/testsuite/gcc.target/i386/excess-precision-2.c 2022-10-13 09:35:28.037241031 +0200
@@ -4,8 +4,14 @@
#include <float.h>
+#ifdef __cplusplus
+extern "C" {
+#endif
extern void abort (void);
extern void exit (int);
+#ifdef __cplusplus
+}
+#endif
volatile long double ldadd1 = 1.0l + 0x1.0p-30l;
volatile long double ld11f = 1.1f;
--- gcc/testsuite/gcc.target/i386/excess-precision-3.c.jj 2022-10-11 14:49:42.456211885 +0200
+++ gcc/testsuite/gcc.target/i386/excess-precision-3.c 2022-10-13 09:35:28.054240796 +0200
@@ -6,8 +6,14 @@
#include <float.h>
#include <stdarg.h>
+#ifdef __cplusplus
+extern "C" {
+#endif
extern void abort (void);
extern void exit (int);
+#ifdef __cplusplus
+}
+#endif
volatile float f1 = 1.0f;
volatile float f2 = 0x1.0p-30f;
@@ -100,6 +106,7 @@ check_double (double d)
abort ();
}
+#ifndef __cplusplus
static inline void
check_float_nonproto (f)
float f;
@@ -115,6 +122,7 @@ check_double_nonproto (d)
if (d != dadd2)
abort ();
}
+#endif
static void
check_double_va (int i, ...)
@@ -132,9 +140,11 @@ test_call (void)
check_float (f1 + f2);
check_double (d1 + d2 + d3);
check_double (f1 + f2 + f3);
+#ifndef __cplusplus
check_float_nonproto (f1 + f2);
check_double_nonproto (d1 + d2 + d3);
check_double_nonproto (f1 + f2 + f3);
+#endif
check_double_va (0, d1 + d2 + d3);
check_double_va (0, f1 + f2 + f3);
}
--- gcc/testsuite/gcc.target/i386/excess-precision-7.c.jj 2022-10-11 14:49:42.456211885 +0200
+++ gcc/testsuite/gcc.target/i386/excess-precision-7.c 2022-10-13 09:35:28.070240576 +0200
@@ -4,8 +4,14 @@
/* { dg-do run } */
/* { dg-options "-std=c99 -mfpmath=387 -fexcess-precision=standard" } */
+#ifdef __cplusplus
+extern "C" {
+#endif
extern void abort (void);
extern void exit (int);
+#ifdef __cplusplus
+}
+#endif
int
main (void)
--- gcc/testsuite/gcc.target/i386/excess-precision-9.c.jj 2022-10-11 14:49:42.542210707 +0200
+++ gcc/testsuite/gcc.target/i386/excess-precision-9.c 2022-10-13 09:35:28.078240466 +0200
@@ -3,8 +3,14 @@
/* { dg-do run } */
/* { dg-options "-std=c99 -mfpmath=387 -fexcess-precision=standard" } */
+#ifdef __cplusplus
+extern "C" {
+#endif
extern void abort (void);
extern void exit (int);
+#ifdef __cplusplus
+}
+#endif
int
main (void)
--- gcc/testsuite/g++.target/i386/excess-precision-1.C.jj 2022-10-13 09:35:28.078240466 +0200
+++ gcc/testsuite/g++.target/i386/excess-precision-1.C 2022-10-13 09:35:28.078240466 +0200
@@ -0,0 +1,6 @@
+// Excess precision tests. Test that excess precision is carried
+// through various operations.
+// { dg-do run }
+// { dg-options "-O2 -mfpmath=387 -fexcess-precision=standard" }
+
+#include "../../gcc.target/i386/excess-precision-1.c"
--- gcc/testsuite/g++.target/i386/excess-precision-2.C.jj 2022-10-13 09:35:28.079240452 +0200
+++ gcc/testsuite/g++.target/i386/excess-precision-2.C 2022-10-13 09:35:28.079240452 +0200
@@ -0,0 +1,5 @@
+// Excess precision tests. Test excess precision of constants.
+// { dg-do run }
+// { dg-options "-O2 -mfpmath=387 -fexcess-precision=standard" }
+
+#include "../../gcc.target/i386/excess-precision-2.c"
--- gcc/testsuite/g++.target/i386/excess-precision-3.C.jj 2022-10-13 09:35:28.079240452 +0200
+++ gcc/testsuite/g++.target/i386/excess-precision-3.C 2022-10-13 09:35:28.079240452 +0200
@@ -0,0 +1,6 @@
+// Excess precision tests. Test excess precision is removed when
+// necessary.
+// { dg-do run }
+// { dg-options "-O2 -mfpmath=387 -fexcess-precision=standard" }
+
+#include "../../gcc.target/i386/excess-precision-3.c"
--- gcc/testsuite/g++.target/i386/excess-precision-4.C.jj 2022-10-13 09:35:28.079240452 +0200
+++ gcc/testsuite/g++.target/i386/excess-precision-4.C 2022-10-13 09:35:28.079240452 +0200
@@ -0,0 +1,7 @@
+// Excess precision tests. Test diagnostics for excess precision of
+// constants.
+// { dg-do compile }
+// { dg-options "-mfpmath=387 -fexcess-precision=standard" }
+
+float f = 0.0f * 1e50f; // { dg-warning "floating constant exceeds range of 'float'" }
+double d = 0.0 * 1e400; // { dg-warning "floating constant exceeds range of 'double'" }
--- gcc/testsuite/g++.target/i386/excess-precision-5.C.jj 2022-10-13 09:35:28.079240452 +0200
+++ gcc/testsuite/g++.target/i386/excess-precision-5.C 2022-10-13 09:35:28.079240452 +0200
@@ -0,0 +1,32 @@
+// Excess precision tests. Verify excess precision doesn't affect
+// actual types.
+// { dg-do compile { target c++11 } }
+// { dg-options "-mfpmath=387 -fexcess-precision=standard" }
+
+namespace std {
+ template<typename T, T v> struct integral_constant {
+ static constexpr T value = v;
+ };
+ typedef integral_constant<bool, false> false_type;
+ typedef integral_constant<bool, true> true_type;
+ template<class T, class U>
+ struct is_same : std::false_type {};
+ template <class T>
+ struct is_same<T, T> : std::true_type {};
+}
+
+float f;
+double d;
+
+void
+test_types (void)
+{
+#define CHECK_FLOAT(E) static_assert (std::is_same <float, decltype (E)>::value, "")
+#define CHECK_DOUBLE(E) static_assert (std::is_same <double, decltype (E)>::value, "")
+ CHECK_FLOAT (f + f);
+ CHECK_DOUBLE (d + d);
+ CHECK_FLOAT (f * f / f);
+ CHECK_DOUBLE (d * d / d);
+ CHECK_FLOAT (f ? f - f : f);
+ CHECK_DOUBLE (d ? d - d : d);
+}
--- gcc/testsuite/g++.target/i386/excess-precision-6.C.jj 2022-10-13 09:35:28.080240438 +0200
+++ gcc/testsuite/g++.target/i386/excess-precision-6.C 2022-10-13 09:35:28.080240438 +0200
@@ -0,0 +1,19 @@
+// Excess precision tests. Make sure sqrt is not inlined for float or
+// double.
+// { dg-do compile }
+// { dg-options "-mfpmath=387 -O2 -fno-math-errno -fexcess-precision=standard" }
+
+float f;
+double d;
+
+float fr;
+double dr;
+
+void
+test_builtins (void)
+{
+ fr = __builtin_sqrtf (f);
+ dr = __builtin_sqrt (d);
+}
+
+// { dg-final { scan-assembler-not "fsqrt" } }
--- gcc/testsuite/g++.target/i386/excess-precision-7.C.jj 2022-10-13 09:35:28.080240438 +0200
+++ gcc/testsuite/g++.target/i386/excess-precision-7.C 2022-10-13 09:35:28.080240438 +0200
@@ -0,0 +1,7 @@
+// Excess precision tests. Test C99 semantics for conversions from
+// integers to floating point: no excess precision for either explicit
+// or implicit conversions.
+// { dg-do run }
+// { dg-options "-mfpmath=387 -fexcess-precision=standard" }
+
+#include "../../gcc.target/i386/excess-precision-7.c"
--- gcc/testsuite/g++.target/i386/excess-precision-9.C.jj 2022-10-13 09:35:28.080240438 +0200
+++ gcc/testsuite/g++.target/i386/excess-precision-9.C 2022-10-13 09:35:28.080240438 +0200
@@ -0,0 +1,6 @@
+// Excess precision tests. Test implicit conversions in comparisons:
+// no excess precision in C++.
+// { dg-do run }
+// { dg-options "-mfpmath=387 -fexcess-precision=standard" }
+
+#include "../../gcc.target/i386/excess-precision-9.c"
--- gcc/testsuite/g++.target/i386/excess-precision-11.C.jj 2022-10-13 09:35:28.080240438 +0200
+++ gcc/testsuite/g++.target/i386/excess-precision-11.C 2022-10-13 09:35:28.080240438 +0200
@@ -0,0 +1,105 @@
+// Excess precision tests. Test excess precision is removed when
+// necessary.
+// { dg-do run }
+// { dg-options "-O2 -mfpmath=387 -fexcess-precision=standard" }
+
+#include <float.h>
+#include <stdarg.h>
+
+extern "C" void abort ();
+
+volatile float f1 = 1.0f;
+volatile float f2 = 0x1.0p-30f;
+volatile float f3 = 0x1.0p-60f;
+volatile double d1 = 1.0;
+volatile double d2 = 0x1.0p-30;
+volatile double d3 = 0x1.0p-60;
+volatile double d3d = 0x1.0p-52;
+volatile float fadd1 = 1.0f + 0x1.0p-30f;
+volatile double dadd2 = 1.0 + 0x1.0p-30 + 0x1.0p-60;
+volatile double dh = 0x1.0p-24;
+volatile float fha = 1.0f + 0x1.0p-23f;
+
+static inline void
+check_float (float f)
+{
+ if (f != fadd1)
+ abort ();
+}
+
+static inline void
+check_float (double)
+{
+ abort ();
+}
+
+static inline void
+check_float (long double)
+{
+ abort ();
+}
+
+static inline void
+check_double (double d)
+{
+ if (d != dadd2)
+ abort ();
+}
+
+static inline void
+check_double (long double)
+{
+ abort ();
+}
+
+static inline void
+check_float2 (float f)
+{
+ if (f != fha)
+ abort ();
+}
+
+struct S {
+ S () {}
+ S (float f) { if (f != fadd1) abort (); }
+};
+
+struct T {
+ T () {}
+ T (double d) { if (d != dadd2) abort (); }
+};
+
+static inline void
+check_float3 (S)
+{
+}
+
+static inline void
+check_double2 (T)
+{
+}
+
+void
+test_call ()
+{
+ check_float (f1 + f2);
+ check_double (f1 + f2);
+ check_double (d1 + d2 + d3);
+ /* Verify rounding direct to float without double rounding. */
+ if (sizeof (long double) > sizeof (double))
+ check_float2 (d1 + dh + d3);
+ else
+ check_float2 (d1 + dh + d3d);
+ check_float3 (f1 + f2);
+ check_double2 (f1 + f2);
+ check_double2 (d1 + d2 + d3);
+ S s1 = static_cast<S> (f1 + f2);
+ T t2 = static_cast<T> (f1 + f2);
+ T t3 = static_cast<T> (d1 + d2 + d3);
+}
+
+int
+main ()
+{
+ test_call ();
+}
--- gcc/testsuite/c-c++-common/dfp/convert-bfp-10.c.jj 2022-10-11 14:49:42.046217498 +0200
+++ gcc/testsuite/c-c++-common/dfp/convert-bfp-10.c 2022-10-13 09:35:28.092240273 +0200
@@ -1,4 +1,5 @@
/* This test assumes IEEE float and double. */
+/* { dg-additional-options "-fexcess-precision=fast" } */
#include "convert.h"
--- gcc/testsuite/c-c++-common/dfp/compare-eq-const.c.jj 2022-10-11 14:49:42.024217800 +0200
+++ gcc/testsuite/c-c++-common/dfp/compare-eq-const.c 2022-10-13 09:35:28.104240108 +0200
@@ -1,5 +1,6 @@
/* C99 6.5.9 Equality operators.
Compare decimal float constants against each other. */
+/* { dg-additional-options "-fexcess-precision=fast" } */
#include "dfp-dbg.h"
--- gcc/testsuite/g++.dg/cpp1z/constexpr-96862.C.jj 2022-10-11 14:49:42.188215554 +0200
+++ gcc/testsuite/g++.dg/cpp1z/constexpr-96862.C 2022-10-13 09:35:28.112239998 +0200
@@ -1,6 +1,6 @@
// PR c++/96862
// { dg-do compile { target c++17 } }
-// { dg-additional-options "-frounding-math" }
+// { dg-additional-options "-frounding-math -fexcess-precision=fast" }
constexpr double a = 0x1.0p+100 + 0x1.0p-100;
const double b = 0x1.0p+100 + 0x1.0p-100;
--- gcc/testsuite/g++.dg/cpp1z/decomp12.C.jj 2022-10-11 14:49:42.193215485 +0200
+++ gcc/testsuite/g++.dg/cpp1z/decomp12.C 2022-10-13 09:35:28.113239984 +0200
@@ -7,13 +7,13 @@ template <typename, typename> struct sam
template <typename T> struct same_type<T, T> {};
int main() {
- std::tuple tuple = { 1, 'a', 2.3, true };
+ std::tuple tuple = { 1, 'a', 2.25, true };
auto[i, c, d, b] = tuple;
same_type<std::tuple_element<0, decltype(tuple)>::type, decltype(i)>{};
same_type<decltype(i), int>{};
same_type<decltype(c), char>{};
same_type<decltype(d), double>{};
same_type<decltype(b), bool>{};
- if (i != 1 || c != 'a' || d != 2.3 || b != true)
+ if (i != 1 || c != 'a' || d != 2.25 || b != true)
__builtin_abort ();
}
--- gcc/testsuite/g++.dg/other/thunk1.C.jj 2022-10-11 14:49:42.224215061 +0200
+++ gcc/testsuite/g++.dg/other/thunk1.C 2022-10-13 09:35:28.120239887 +0200
@@ -1,5 +1,6 @@
// PR c++/12007 Multiple inheritance float pass by value fails
// { dg-do run }
+// { dg-additional-options "-fexcess-precision=fast" }
extern "C" void abort (void);
--- gcc/testsuite/g++.dg/vect/pr64410.cc.jj 2022-10-11 14:49:42.264214513 +0200
+++ gcc/testsuite/g++.dg/vect/pr64410.cc 2022-10-13 09:35:28.121239874 +0200
@@ -1,5 +1,6 @@
// { dg-do compile }
// { dg-require-effective-target vect_double }
+// { dg-additional-options "-fexcess-precision=fast" }
#include <vector>
#include <complex>
--- gcc/testsuite/g++.dg/vect/pr89653.cc.jj 2020-01-12 11:54:37.280400328 +0100
+++ gcc/testsuite/g++.dg/vect/pr89653.cc 2022-10-13 10:01:35.564649879 +0200
@@ -1,5 +1,6 @@
// { dg-do compile }
// { dg-require-effective-target vect_double }
+// { dg-additional-options "-fexcess-precision=fast" }
#include <algorithm>
--- gcc/testsuite/g++.dg/cpp1y/pr68180.C.jj 2022-10-11 14:49:42.168215827 +0200
+++ gcc/testsuite/g++.dg/cpp1y/pr68180.C 2022-10-13 09:35:28.121239874 +0200
@@ -1,6 +1,6 @@
// PR c++/68180
// { dg-do compile { target c++14 } }
-// { dg-additional-options "-Wno-psabi" }
+// { dg-additional-options "-Wno-psabi -fexcess-precision=fast" }
typedef float __attribute__( ( vector_size( 16 ) ) ) float32x4_t;
constexpr float32x4_t fill(float x) {
--- gcc/testsuite/g++.dg/cpp0x/variadic-tuple.C.jj 2022-10-11 14:49:42.135216279 +0200
+++ gcc/testsuite/g++.dg/cpp0x/variadic-tuple.C 2022-10-13 09:35:28.130239750 +0200
@@ -1,4 +1,5 @@
// { dg-do run { target c++11 } }
+// { dg-additional-options "-fexcess-precision=fast" }
// An implementation of TR1's <tuple> using variadic teplates
// Contributed by Douglas Gregor <doug.gregor@gmail.com>
--- gcc/testsuite/g++.dg/cpp0x/nsdmi-union1.C.jj 2022-10-11 14:49:42.104216704 +0200
+++ gcc/testsuite/g++.dg/cpp0x/nsdmi-union1.C 2022-10-13 09:35:28.140239612 +0200
@@ -18,8 +18,8 @@ int main()
{
Test t;
B b;
- B b2(4.2);
+ B b2(4.25);
- if (t.a != 4 || b.i != 42 || b2.d != 4.2)
+ if (t.a != 4 || b.i != 42 || b2.d != 4.25)
__builtin_abort();
}
--- gcc/testsuite/g++.old-deja/g++.brendan/copy9.C.jj 2022-10-11 14:49:42.304213966 +0200
+++ gcc/testsuite/g++.old-deja/g++.brendan/copy9.C 2022-10-13 09:35:28.152239447 +0200
@@ -1,4 +1,5 @@
// { dg-do run }
+// { dg-additional-options "-fexcess-precision=fast" }
// GROUPS passed copy-ctors
#include <iostream>
--- gcc/testsuite/g++.old-deja/g++.brendan/overload7.C.jj 2022-10-11 14:49:42.327213651 +0200
+++ gcc/testsuite/g++.old-deja/g++.brendan/overload7.C 2022-10-13 09:35:28.152239447 +0200
@@ -1,4 +1,5 @@
// { dg-do run }
+// { dg-additional-options "-fexcess-precision=fast" }
// GROUPS passed overloading
extern "C" int printf (const char *, ...);
Jakub
next prev parent reply other threads:[~2022-10-13 16:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-11 13:33 [PATCH] c++: " Jakub Jelinek
2022-10-12 18:08 ` Jason Merrill
2022-10-13 16:40 ` Jakub Jelinek [this message]
2022-10-13 19:28 ` [PATCH] c++, v2: " Jason Merrill
2022-10-12 18:17 ` [PATCH] c++: " Marek Polacek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y0g/g0JYbV33TZiW@tucnak \
--to=jakub@redhat.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=jason@redhat.com \
--cc=joseph@codesourcery.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).