From: Jakub Jelinek <jakub@redhat.com>
To: Uros Bizjak <ubizjak@gmail.com>,
Roger Sayle <roger@nextmovesoftware.com>
Cc: gcc-patches@gcc.gnu.org
Subject: [PATCH] i386: Add *concat<mode><dwi>3_{5,6,7} patterns [PR107627]
Date: Thu, 8 Dec 2022 10:48:47 +0100 [thread overview]
Message-ID: <Y5Gy/7jwJG2UdNTA@tucnak> (raw)
In-Reply-To: <Y4hhT8kVXen8yOX5@tucnak>
Hi!
On Thu, Dec 01, 2022 at 09:09:51AM +0100, Jakub Jelinek via Gcc-patches wrote:
> BTW, I wonder if we couldn't add additional patterns which would catch
> the case where one of the operands is constant.
The following patch does add those.
The difference with the patch on the 2 testcases is:
baz:
- movq 8(%rsi), %rax
+ movq 8(%rsi), %rsi
+ movq %rdi, %r8
movl %edx, %ecx
- xorl %r8d, %r8d
- xorl %edx, %edx
- movabsq $-2401053089206453570, %r9
- orq %r8, %rax
- orq %r9, %rdx
- shrdq %rdx, %rax
- movq %rax, (%rdi)
+ movabsq $-2401053089206453570, %rdi
+ movq %rsi, %rax
+ shrdq %rdi, %rax
+ movq %rax, (%r8)
qux:
- movq (%rsi), %rax
+ movq %rdi, %r8
+ movq (%rsi), %rdi
movl %edx, %ecx
- xorl %r9d, %r9d
- movabsq $-2401053089206453570, %r8
- movq %rax, %rdx
- xorl %eax, %eax
- orq %r8, %rax
- orq %r9, %rdx
- shrdq %rdx, %rax
- movq %rax, (%rdi)
+ movabsq $-2401053089206453570, %rsi
+ movq %rsi, %rax
+ shrdq %rdi, %rax
+ movq %rax, (%r8)
and
garply:
pushl %esi
- xorl %edx, %edx
+ movl $-559038737, %esi
pushl %ebx
movl 16(%esp), %eax
- orl $-559038737, %edx
movl 20(%esp), %ecx
- movl 4(%eax), %eax
- shrdl %edx, %eax
movl 12(%esp), %edx
+ movl 4(%eax), %ebx
+ movl %ebx, %eax
+ shrdl %esi, %eax
fred:
...
movl 16(%esp), %eax
+ movl $-889275714, %ebx
movl 20(%esp), %ecx
- movl (%eax), %eax
- movl %eax, %edx
- movl $0, %eax
- orl $-889275714, %eax
- shrdl %edx, %eax
movl 12(%esp), %edx
+ movl (%eax), %esi
+ movl %ebx, %eax
+ shrdl %esi, %eax
Bootstrapped/regtested on x86_64-linux and i686-linux, ok for trunk?
2022-12-08 Jakub Jelinek <jakub@redhat.com>
PR target/107627
* config/i386/i386.md (HALF, half): New mode attributes.
(*concat<half><mode>3_5, *concat<mode><dwi>3_6,
*concat<mode><dwi>3_7): New define_insn_and_split patterns.
* gcc.target/i386/pr107627-3.c: New test.
* gcc.target/i386/pr107627-4.c: New test.
--- gcc/config/i386/i386.md.jj 2022-12-06 12:16:31.059905487 +0100
+++ gcc/config/i386/i386.md 2022-12-07 15:11:55.297914206 +0100
@@ -1134,6 +1134,10 @@ (define_mode_attr MODE_SIZE [(QI "1") (H
(define_mode_attr DWI [(QI "HI") (HI "SI") (SI "DI") (DI "TI") (TI "OI")])
(define_mode_attr dwi [(QI "hi") (HI "si") (SI "di") (DI "ti") (TI "oi")])
+;; Half sized integer modes.
+(define_mode_attr HALF [(TI "DI") (DI "SI")])
+(define_mode_attr half [(TI "di") (DI "si")])
+
;; LEA mode corresponding to an integer mode
(define_mode_attr LEAMODE [(QI "SI") (HI "SI") (SI "SI") (DI "DI")])
@@ -11464,6 +11468,80 @@ (define_insn_and_split "*concat<mode><dw
split_double_concat (<DWI>mode, operands[0], operands[1], operands[2]);
DONE;
})
+
+(define_insn_and_split "*concat<half><mode>3_5"
+ [(set (match_operand:DWI 0 "nonimmediate_operand" "=ro")
+ (any_or_plus:DWI
+ (ashift:DWI (match_operand:DWI 1 "register_operand" "r")
+ (match_operand:DWI 2 "const_int_operand"))
+ (match_operand:DWI 3 "const_scalar_int_operand")))]
+ "INTVAL (operands[2]) == <MODE_SIZE> * BITS_PER_UNIT / 2
+ && (<MODE>mode == DImode
+ ? CONST_INT_P (operands[3])
+ && (UINTVAL (operands[3]) & ~GET_MODE_MASK (SImode)) == 0
+ : CONST_INT_P (operands[3])
+ ? INTVAL (operands[3]) >= 0
+ : CONST_WIDE_INT_NUNITS (operands[3]) == 2
+ && CONST_WIDE_INT_ELT (operands[3], 1) == 0)"
+ "#"
+ "&& reload_completed"
+ [(clobber (const_int 0))]
+{
+ rtx op3 = simplify_subreg (<HALF>mode, operands[3], <MODE>mode, 0);
+ split_double_concat (<MODE>mode, operands[0], op3,
+ gen_lowpart (<HALF>mode, operands[1]));
+ DONE;
+})
+
+(define_insn_and_split "*concat<mode><dwi>3_6"
+ [(set (match_operand:<DWI> 0 "nonimmediate_operand" "=ro,r")
+ (any_or_plus:<DWI>
+ (ashift:<DWI>
+ (zero_extend:<DWI>
+ (match_operand:DWIH 1 "nonimmediate_operand" "r,m"))
+ (match_operand:<DWI> 2 "const_int_operand"))
+ (match_operand:<DWI> 3 "const_scalar_int_operand")))]
+ "INTVAL (operands[2]) == <MODE_SIZE> * BITS_PER_UNIT
+ && (<DWI>mode == DImode
+ ? CONST_INT_P (operands[3])
+ && (UINTVAL (operands[3]) & ~GET_MODE_MASK (SImode)) == 0
+ : CONST_INT_P (operands[3])
+ ? INTVAL (operands[3]) >= 0
+ : CONST_WIDE_INT_NUNITS (operands[3]) == 2
+ && CONST_WIDE_INT_ELT (operands[3], 1) == 0)"
+ "#"
+ "&& reload_completed"
+ [(clobber (const_int 0))]
+{
+ rtx op3 = simplify_subreg (<MODE>mode, operands[3], <DWI>mode, 0);
+ split_double_concat (<DWI>mode, operands[0], op3, operands[1]);
+ DONE;
+})
+
+(define_insn_and_split "*concat<mode><dwi>3_7"
+ [(set (match_operand:<DWI> 0 "nonimmediate_operand" "=ro,r")
+ (any_or_plus:<DWI>
+ (zero_extend:<DWI>
+ (match_operand:DWIH 1 "nonimmediate_operand" "r,m"))
+ (match_operand:<DWI> 2 "const_scalar_int_operand")))]
+ "<DWI>mode == DImode
+ ? CONST_INT_P (operands[2])
+ && (UINTVAL (operands[2]) & GET_MODE_MASK (SImode)) == 0
+ : CONST_WIDE_INT_P (operands[2])
+ && CONST_WIDE_INT_NUNITS (operands[2]) == 2
+ && CONST_WIDE_INT_ELT (operands[2], 0) == 0"
+ "#"
+ "&& reload_completed"
+ [(clobber (const_int 0))]
+{
+ rtx op2;
+ if (<DWI>mode == DImode)
+ op2 = gen_int_mode (INTVAL (operands[2]) >> 32, <MODE>mode);
+ else
+ op2 = gen_int_mode (CONST_WIDE_INT_ELT (operands[2], 1), <MODE>mode);
+ split_double_concat (<DWI>mode, operands[0], operands[1], op2);
+ DONE;
+})
\f
;; Negation instructions
--- gcc/testsuite/gcc.target/i386/pr107627-3.c.jj 2022-12-07 15:27:56.214095258 +0100
+++ gcc/testsuite/gcc.target/i386/pr107627-3.c 2022-12-07 13:22:44.728247774 +0100
@@ -0,0 +1,28 @@
+/* PR target/107627 */
+/* { dg-do compile { target int128 } } */
+/* { dg-options "-O2 -masm=att" } */
+/* { dg-final { scan-assembler-not "\torq\t" } } */
+
+static inline unsigned __int128
+foo (unsigned long long x, unsigned long long y)
+{
+ return ((unsigned __int128) x << 64) | y;
+}
+
+static inline unsigned long long
+bar (unsigned long long x, unsigned long long y, unsigned z)
+{
+ return foo (x, y) >> (z % 64);
+}
+
+void
+baz (unsigned long long *x, const unsigned long long *y, unsigned z)
+{
+ x[0] = bar (0xdeadbeefcafebabeULL, y[1], z);
+}
+
+void
+qux (unsigned long long *x, const unsigned long long *y, unsigned z)
+{
+ x[0] = bar (y[0], 0xdeadbeefcafebabeULL, z);
+}
--- gcc/testsuite/gcc.target/i386/pr107627-4.c.jj 2022-12-07 15:27:59.519047759 +0100
+++ gcc/testsuite/gcc.target/i386/pr107627-4.c 2022-12-07 13:23:28.050621778 +0100
@@ -0,0 +1,28 @@
+/* PR target/107627 */
+/* { dg-do compile { target ia32 } } */
+/* { dg-options "-O2 -masm=att" } */
+/* { dg-final { scan-assembler-not "\torl\t" } } */
+
+static inline unsigned long long
+qux (unsigned int x, unsigned int y)
+{
+ return ((unsigned long long) x << 32) | y;
+}
+
+static inline unsigned int
+corge (unsigned int x, unsigned int y, unsigned z)
+{
+ return qux (x, y) >> (z % 32);
+}
+
+void
+garply (unsigned int *x, const unsigned int *y, unsigned z)
+{
+ x[0] = corge (0xdeadbeefU, y[1], z);
+}
+
+void
+fred (unsigned int *x, const unsigned int *y, unsigned z)
+{
+ x[0] = corge (y[0], 0xcafebabeU, z);
+}
Jakub
next prev parent reply other threads:[~2022-12-08 9:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-01 8:09 [PATCH] i386: Improve *concat<mode><dwi>3_{1,2,3,4} " Jakub Jelinek
2022-12-01 8:23 ` Uros Bizjak
2022-12-08 9:48 ` Jakub Jelinek [this message]
2022-12-08 10:51 ` [PATCH] i386: Add *concat<mode><dwi>3_{5,6,7} " Uros Bizjak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y5Gy/7jwJG2UdNTA@tucnak \
--to=jakub@redhat.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=roger@nextmovesoftware.com \
--cc=ubizjak@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).