* rs6000: add support for powerpc64le-unknown-freebsd
@ 2020-12-14 15:35 Piotr Kubaj
2020-12-14 16:46 ` Segher Boessenkool
2020-12-14 23:37 ` Gerald Pfeifer
0 siblings, 2 replies; 12+ messages in thread
From: Piotr Kubaj @ 2020-12-14 15:35 UTC (permalink / raw)
To: gcc-patches, David Edelsohn, Segher Boessenkool, Andreas Tobler
[-- Attachment #1.1: Type: text/plain, Size: 480 bytes --]
Hello,
this patch implements support for powerpc64le architecture on FreeBSD. Since we don't have powerpcle (32-bit), I did not add support for powerpcle here. This remains to be changed if there is powerpcle support in the future.
Patch implements similar endian detection to what linux64.h uses.
Would it be ok to backport it to at least GCC 10?
gcc/Changelog:
2020-12-14 Piotr Kubaj <pkubaj@FreeBSD.org>
* config.gcc: add support for powerpc64le-unknown-freebsd
[-- Attachment #1.2: gcc-powerpc64le-freebsd.patch --]
[-- Type: text/x-diff, Size: 1935 bytes --]
--- gcc/config.gcc.orig 2020-12-07 03:00:29 UTC
+++ gcc/config.gcc
@@ -2868,6 +2868,10 @@ powerpc*-*-freebsd*)
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
case ${target} in
+ powerpc*le-*-*)
+ tm_file="${tm_file} rs6000/sysv4le.h" ;;
+ esac
+ case ${target} in
powerpc64*)
tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h"
tmake_file="${tmake_file} rs6000/t-freebsd64"
--- gcc/config/rs6000/freebsd64.h.orig 2020-07-23 06:35:17 UTC
+++ gcc/config/rs6000/freebsd64.h
@@ -158,8 +157,8 @@ extern int dot_symbols;
#define ASM_SPEC64 "-a64"
#define ASM_SPEC_COMMON "%(asm_cpu) \
-%{,assembler|,assembler-with-cpp: %{mregnames} %{mno-regnames}} \
-%{mlittle} %{mlittle-endian} %{mbig} %{mbig-endian}"
+%{,assembler|,assembler-with-cpp: %{mregnames} %{mno-regnames}}" \
+ ENDIAN_SELECT(" -mbig", " -mlittle", DEFAULT_ASM_ENDIAN)
#undef SUBSUBTARGET_EXTRA_SPECS
#define SUBSUBTARGET_EXTRA_SPECS \
@@ -181,9 +180,15 @@ extern int dot_symbols;
%{static:-Bstatic}} \
%{symbolic:-Bsymbolic}"
+#undef DEFAULT_ASM_ENDIAN
#define LINK_OS_FREEBSD_SPEC32 "-melf32ppc_fbsd " LINK_OS_FREEBSD_SPEC_DEF
-
+#if (TARGET_DEFAULT & MASK_LITTLE_ENDIAN)
+#define DEFAULT_ASM_ENDIAN " -mlittle"
+#define LINK_OS_FREEBSD_SPEC64 "-melf64lppc_fbsd " LINK_OS_FREEBSD_SPEC_DEF
+#else
+#define DEFAULT_ASM_ENDIAN " -mbig"
#define LINK_OS_FREEBSD_SPEC64 "-melf64ppc_fbsd " LINK_OS_FREEBSD_SPEC_DEF
+#endif
#undef MULTILIB_DEFAULTS
#define MULTILIB_DEFAULTS { "m64" }
--- gcc/configure.ac.orig 2020-12-14 15:22:23 UTC
+++ gcc/configure.ac
@@ -5874,6 +5874,8 @@ case "$target:$tm_file" in
*-*-linux*)
emul_name="-melf64ppc"
;;
+ *le-*-freebsd*)
+ emul_name="-melf64lppc_fbsd"
*-*-freebsd*)
emul_name="-melf64ppc_fbsd"
;;
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-14 15:35 rs6000: add support for powerpc64le-unknown-freebsd Piotr Kubaj
@ 2020-12-14 16:46 ` Segher Boessenkool
2020-12-14 23:29 ` Gerald Pfeifer
2020-12-14 23:37 ` Gerald Pfeifer
1 sibling, 1 reply; 12+ messages in thread
From: Segher Boessenkool @ 2020-12-14 16:46 UTC (permalink / raw)
To: Piotr Kubaj; +Cc: gcc-patches, David Edelsohn, Andreas Tobler
Hi!
On Mon, Dec 14, 2020 at 04:35:38PM +0100, Piotr Kubaj wrote:
> this patch implements support for powerpc64le architecture on FreeBSD. Since we don't have powerpcle (32-bit), I did not add support for powerpcle here. This remains to be changed if there is powerpcle support in the future.
>
> Patch implements similar endian detection to what linux64.h uses.
>
> Would it be ok to backport it to at least GCC 10?
> --- gcc/config.gcc.orig 2020-12-07 03:00:29 UTC
> +++ gcc/config.gcc
> @@ -2868,6 +2868,10 @@ powerpc*-*-freebsd*)
> extra_options="${extra_options} rs6000/sysv4.opt"
> tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
> case ${target} in
> + powerpc*le-*-*)
> + tm_file="${tm_file} rs6000/sysv4le.h" ;;
> + esac
What an obvious filename ;-)
I guess we should put all these header files together into one again,
but that is hard to do without regressing things (I suspect this is
where the mystery power4 stems from as well, fwiw).
The patch looks fine. Okay for trunk. Also okay for any backports you
want (after waiting to see if it creates problems on trunk, as usual).
Thanks!
Segher
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-14 16:46 ` Segher Boessenkool
@ 2020-12-14 23:29 ` Gerald Pfeifer
2020-12-15 0:30 ` Segher Boessenkool
2020-12-16 22:58 ` Segher Boessenkool
0 siblings, 2 replies; 12+ messages in thread
From: Gerald Pfeifer @ 2020-12-14 23:29 UTC (permalink / raw)
To: Segher Boessenkool
Cc: Piotr Kubaj, gcc-patches, Andreas Tobler, David Edelsohn
On Mon, 14 Dec 2020, Segher Boessenkool wrote:
>> + powerpc*le-*-*)
>> + tm_file="${tm_file} rs6000/sysv4le.h" ;;
>> + esac
> What an obvious filename ;-)
;-)
> The patch looks fine. Okay for trunk. Also okay for any backports you
> want (after waiting to see if it creates problems on trunk, as usual).
Thank you! Segher doesn't have write access, and usually I'd help out,
alas autoconf in GCC-land and me are, um, slightly divergent.
Any chance (one of you) can help and commit this?
To make this easier, I've created a proposal for a full ChangeLog
entry. :-)
2020-12-15 Piotr Kubaj <pkubaj@FreeBSD.org>
* config.gcc (powerpc*le-*-freebsd*): Add.
* configure.ac (powerpc*le-*-freebsd*): Ditto.
* config/rs6000/freebsd64.h (ASM_SPEC_COMMON): Use ENDIAN_SELECT.
(DEFAULT_ASM_ENDIAN): Add little endian support.
(LINK_OS_FREEBSD_SPEC64): Ditto.
Thank you,
Gerald
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-14 15:35 rs6000: add support for powerpc64le-unknown-freebsd Piotr Kubaj
2020-12-14 16:46 ` Segher Boessenkool
@ 2020-12-14 23:37 ` Gerald Pfeifer
2020-12-14 23:52 ` Piotr Kubaj
1 sibling, 1 reply; 12+ messages in thread
From: Gerald Pfeifer @ 2020-12-14 23:37 UTC (permalink / raw)
To: Piotr Kubaj
Cc: gcc-patches, David Edelsohn, Segher Boessenkool, Andreas Tobler
On Mon, 14 Dec 2020, Piotr Kubaj via Gcc-patches wrote:
> --- gcc/configure.ac.orig 2020-12-14 15:22:23 UTC
> +++ gcc/configure.ac
> @@ -5874,6 +5874,8 @@ case "$target:$tm_file" in
> *-*-linux*)
> emul_name="-melf64ppc"
> ;;
>+ *le-*-freebsd*)
>+ emul_name="-melf64lppc_fbsd"
> *-*-freebsd*)
> emul_name="-melf64ppc_fbsd"
> ;;
Is there a ;; missing to terminate the *le-*-freebsd* entry?
(Or am I missing some subtlety of /bin/sh ?)
Gerald
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-14 23:37 ` Gerald Pfeifer
@ 2020-12-14 23:52 ` Piotr Kubaj
2020-12-16 22:23 ` Segher Boessenkool
0 siblings, 1 reply; 12+ messages in thread
From: Piotr Kubaj @ 2020-12-14 23:52 UTC (permalink / raw)
To: Gerald Pfeifer
Cc: gcc-patches, David Edelsohn, Segher Boessenkool, Andreas Tobler
[-- Attachment #1.1: Type: text/plain, Size: 669 bytes --]
Yes, there is, thanks for noticing that!
Fixed patch attached.
On 20-12-15 00:37:02, Gerald Pfeifer wrote:
> On Mon, 14 Dec 2020, Piotr Kubaj via Gcc-patches wrote:
> > --- gcc/configure.ac.orig 2020-12-14 15:22:23 UTC
> > +++ gcc/configure.ac
> > @@ -5874,6 +5874,8 @@ case "$target:$tm_file" in
> > *-*-linux*)
> > emul_name="-melf64ppc"
> > ;;
> >+ *le-*-freebsd*)
> >+ emul_name="-melf64lppc_fbsd"
> > *-*-freebsd*)
> > emul_name="-melf64ppc_fbsd"
> > ;;
>
> Is there a ;; missing to terminate the *le-*-freebsd* entry?
>
> (Or am I missing some subtlety of /bin/sh ?)
>
> Gerald
>
--
[-- Attachment #1.2: gcc-powerpc64le-freebsd.patch --]
[-- Type: text/x-diff, Size: 1946 bytes --]
--- gcc/config.gcc.orig 2020-12-07 03:00:29 UTC
+++ gcc/config.gcc
@@ -2868,6 +2868,10 @@ powerpc*-*-freebsd*)
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
case ${target} in
+ powerpc*le-*-*)
+ tm_file="${tm_file} rs6000/sysv4le.h" ;;
+ esac
+ case ${target} in
powerpc64*)
tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h"
tmake_file="${tmake_file} rs6000/t-freebsd64"
--- gcc/config/rs6000/freebsd64.h.orig 2020-07-23 06:35:17 UTC
+++ gcc/config/rs6000/freebsd64.h
@@ -158,8 +157,8 @@ extern int dot_symbols;
#define ASM_SPEC64 "-a64"
#define ASM_SPEC_COMMON "%(asm_cpu) \
-%{,assembler|,assembler-with-cpp: %{mregnames} %{mno-regnames}} \
-%{mlittle} %{mlittle-endian} %{mbig} %{mbig-endian}"
+%{,assembler|,assembler-with-cpp: %{mregnames} %{mno-regnames}}" \
+ ENDIAN_SELECT(" -mbig", " -mlittle", DEFAULT_ASM_ENDIAN)
#undef SUBSUBTARGET_EXTRA_SPECS
#define SUBSUBTARGET_EXTRA_SPECS \
@@ -181,9 +180,15 @@ extern int dot_symbols;
%{static:-Bstatic}} \
%{symbolic:-Bsymbolic}"
+#undef DEFAULT_ASM_ENDIAN
#define LINK_OS_FREEBSD_SPEC32 "-melf32ppc_fbsd " LINK_OS_FREEBSD_SPEC_DEF
-
+#if (TARGET_DEFAULT & MASK_LITTLE_ENDIAN)
+#define DEFAULT_ASM_ENDIAN " -mlittle"
+#define LINK_OS_FREEBSD_SPEC64 "-melf64lppc_fbsd " LINK_OS_FREEBSD_SPEC_DEF
+#else
+#define DEFAULT_ASM_ENDIAN " -mbig"
#define LINK_OS_FREEBSD_SPEC64 "-melf64ppc_fbsd " LINK_OS_FREEBSD_SPEC_DEF
+#endif
#undef MULTILIB_DEFAULTS
#define MULTILIB_DEFAULTS { "m64" }
--- gcc/configure.ac.orig 2020-12-14 15:22:23 UTC
+++ gcc/configure.ac
@@ -5874,6 +5874,9 @@ case "$target:$tm_file" in
*-*-linux*)
emul_name="-melf64ppc"
;;
+ *le-*-freebsd*)
+ emul_name="-melf64lppc_fbsd"
+ ;;
*-*-freebsd*)
emul_name="-melf64ppc_fbsd"
;;
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-14 23:29 ` Gerald Pfeifer
@ 2020-12-15 0:30 ` Segher Boessenkool
2020-12-16 22:58 ` Segher Boessenkool
1 sibling, 0 replies; 12+ messages in thread
From: Segher Boessenkool @ 2020-12-15 0:30 UTC (permalink / raw)
To: Gerald Pfeifer; +Cc: Piotr Kubaj, gcc-patches, Andreas Tobler, David Edelsohn
On Tue, Dec 15, 2020 at 12:29:45AM +0100, Gerald Pfeifer wrote:
> On Mon, 14 Dec 2020, Segher Boessenkool wrote:
> >> + powerpc*le-*-*)
> >> + tm_file="${tm_file} rs6000/sysv4le.h" ;;
> >> + esac
> > What an obvious filename ;-)
>
> ;-)
>
> > The patch looks fine. Okay for trunk. Also okay for any backports you
> > want (after waiting to see if it creates problems on trunk, as usual).
>
> Thank you! Segher doesn't have write access, and usually I'd help out,
> alas autoconf in GCC-land and me are, um, slightly divergent.
Piotr doesn't have write access, I think you mean :-)
> Any chance (one of you) can help and commit this?
I'll commit it tomorrow morning, it's too late right now for me to trust
myself doing a commit correctly.
> To make this easier, I've created a proposal for a full ChangeLog
> entry. :-)
Thanks! Even less work :-)
Segher
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-14 23:52 ` Piotr Kubaj
@ 2020-12-16 22:23 ` Segher Boessenkool
2021-04-29 11:37 ` Piotr Kubaj
0 siblings, 1 reply; 12+ messages in thread
From: Segher Boessenkool @ 2020-12-16 22:23 UTC (permalink / raw)
To: Piotr Kubaj; +Cc: Gerald Pfeifer, gcc-patches, David Edelsohn, Andreas Tobler
On Tue, Dec 15, 2020 at 12:52:05AM +0100, Piotr Kubaj wrote:
> Yes, there is, thanks for noticing that!
>
> Fixed patch attached.
Hi!
Could you send this as plain text? It now is quoted-printable, which is
really hard to handle.
Thanks!
Hrm, this is really short, I'll just try to fix it by hand... Wish me
luck :-)
Segher
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-14 23:29 ` Gerald Pfeifer
2020-12-15 0:30 ` Segher Boessenkool
@ 2020-12-16 22:58 ` Segher Boessenkool
2020-12-28 11:44 ` Gerald Pfeifer
1 sibling, 1 reply; 12+ messages in thread
From: Segher Boessenkool @ 2020-12-16 22:58 UTC (permalink / raw)
To: Gerald Pfeifer; +Cc: Piotr Kubaj, gcc-patches, Andreas Tobler, David Edelsohn
On Tue, Dec 15, 2020 at 12:29:45AM +0100, Gerald Pfeifer wrote:
> > The patch looks fine. Okay for trunk. Also okay for any backports you
> > want (after waiting to see if it creates problems on trunk, as usual).
>
> Thank you! Segher doesn't have write access, and usually I'd help out,
> alas autoconf in GCC-land and me are, um, slightly divergent.
It's not you. So because this is just three lines, I did manual
surgery. Someone should fix the generated configure though, it is *not*
generated with 2.69, although it claims it is.
> Any chance (one of you) can help and commit this?
Done now.
Please remind me in a week or so to do the backports?
> To make this easier, I've created a proposal for a full ChangeLog
> entry. :-)
>
> 2020-12-15 Piotr Kubaj <pkubaj@FreeBSD.org>
>
> * config.gcc (powerpc*le-*-freebsd*): Add.
> * configure.ac (powerpc*le-*-freebsd*): Ditto.
> * config/rs6000/freebsd64.h (ASM_SPEC_COMMON): Use ENDIAN_SELECT.
> (DEFAULT_ASM_ENDIAN): Add little endian support.
> (LINK_OS_FREEBSD_SPEC64): Ditto.
I added an entry for configure, and a little blurb taken from the first
email.
Thanks to both of you,
Segher
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-16 22:58 ` Segher Boessenkool
@ 2020-12-28 11:44 ` Gerald Pfeifer
2020-12-28 12:37 ` Segher Boessenkool
0 siblings, 1 reply; 12+ messages in thread
From: Gerald Pfeifer @ 2020-12-28 11:44 UTC (permalink / raw)
To: Segher Boessenkool
Cc: Piotr Kubaj, gcc-patches, Andreas Tobler, David Edelsohn
On Wed, 16 Dec 2020, Segher Boessenkool wrote:
>> Any chance (one of you) can help and commit this?
> Done now.
>
> Please remind me in a week or so to do the backports?
Thank you, Segher!
And thanks for pushing the backports, too, whenever you get to them,
holiday season and such.
Gerald
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-28 11:44 ` Gerald Pfeifer
@ 2020-12-28 12:37 ` Segher Boessenkool
2021-09-10 23:26 ` Piotr Kubaj
0 siblings, 1 reply; 12+ messages in thread
From: Segher Boessenkool @ 2020-12-28 12:37 UTC (permalink / raw)
To: Gerald Pfeifer; +Cc: Piotr Kubaj, gcc-patches, Andreas Tobler, David Edelsohn
On Mon, Dec 28, 2020 at 12:44:15PM +0100, Gerald Pfeifer wrote:
> On Wed, 16 Dec 2020, Segher Boessenkool wrote:
> >> Any chance (one of you) can help and commit this?
> > Done now.
> >
> > Please remind me in a week or so to do the backports?
>
> Thank you, Segher!
>
> And thanks for pushing the backports, too, whenever you get to them,
> holiday season and such.
Hey, if I can remember how ssh works ;-)
Done now (10 and 9). Cheers!
Segher
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-16 22:23 ` Segher Boessenkool
@ 2021-04-29 11:37 ` Piotr Kubaj
0 siblings, 0 replies; 12+ messages in thread
From: Piotr Kubaj @ 2021-04-29 11:37 UTC (permalink / raw)
To: Segher Boessenkool
Cc: Gerald Pfeifer, gcc-patches, David Edelsohn, Andreas Tobler
[-- Attachment #1: Type: text/plain, Size: 1899 bytes --]
Hello again,
sorry to reopen this issue, but one part was skipped. It was just now found out, because it doesn't cause build issues, but only runtime issues (GCC fails to build binaries):
/usr/local/bin/ld: /usr/local/lib/gcc10/libgcc_s.so: undefined reference to `.__udivmodti4'
/usr/local/bin/ld: /usr/local/lib/gcc10/libgcc_s.so: undefined reference to `.__ctzdi2'
/usr/local/bin/ld: /usr/local/lib/gcc10/libgcc_s.so: undefined reference to `.__parityti2'
/usr/local/bin/ld: /usr/local/lib/gcc10/libgcc_s.so: undefined reference to `.__enable_execute_stack'
Could you commit the following patch:
--- gcc/configure.orig 2021-04-29 10:19:44 UTC
+++ gcc/configure
@@ -29405,7 +29405,7 @@ $as_echo "#define HAVE_LD_PPC_GNU_ATTR_LONG_DOUBLE 1"
esac
case "$target:$tm_file" in
- powerpc64-*-freebsd* | powerpc64*-*-linux* | powerpc*-*-linux*rs6000/biarch64.h*)
+ powerpc64*-*-freebsd* | powerpc64*-*-linux* | powerpc*-*-linux*rs6000/biarch64.h*)
case "$target" in
*le-*-linux*)
emul_name="-melf64lppc"
--- gcc/configure.ac.orig 2021-04-29 11:22:30 UTC
+++ gcc/configure.ac
@@ -5871,7 +5871,7 @@ EOF
esac
case "$target:$tm_file" in
- powerpc64-*-freebsd* | powerpc64*-*-linux* | powerpc*-*-linux*rs6000/biarch64.h*)
+ powerpc64*-*-freebsd* | powerpc64*-*-linux* | powerpc*-*-linux*rs6000/biarch64.h*)
case "$target" in
*le-*-linux*)
emul_name="-melf64lppc"
Thanks,
Piotr Kubaj.
On 20-12-16 16:23:09, Segher Boessenkool wrote:
> On Tue, Dec 15, 2020 at 12:52:05AM +0100, Piotr Kubaj wrote:
> > Yes, there is, thanks for noticing that!
> >
> > Fixed patch attached.
>
> Hi!
>
> Could you send this as plain text? It now is quoted-printable, which is
> really hard to handle.
>
> Thanks!
>
> Hrm, this is really short, I'll just try to fix it by hand... Wish me
> luck :-)
>
>
> Segher
--
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: rs6000: add support for powerpc64le-unknown-freebsd
2020-12-28 12:37 ` Segher Boessenkool
@ 2021-09-10 23:26 ` Piotr Kubaj
0 siblings, 0 replies; 12+ messages in thread
From: Piotr Kubaj @ 2021-09-10 23:26 UTC (permalink / raw)
To: Segher Boessenkool
Cc: Gerald Pfeifer, gcc-patches, Andreas Tobler, David Edelsohn
[-- Attachment #1.1: Type: text/plain, Size: 709 bytes --]
Hello again,
it looks like one simple patch got left out by accident. Would it be possible for you to commit it?
Thank you,
Piotr Kubaj.
On 20-12-28 06:37:23, Segher Boessenkool wrote:
> On Mon, Dec 28, 2020 at 12:44:15PM +0100, Gerald Pfeifer wrote:
> > On Wed, 16 Dec 2020, Segher Boessenkool wrote:
> > >> Any chance (one of you) can help and commit this?
> > > Done now.
> > >
> > > Please remind me in a week or so to do the backports?
> >
> > Thank you, Segher!
> >
> > And thanks for pushing the backports, too, whenever you get to them,
> > holiday season and such.
>
> Hey, if I can remember how ssh works ;-)
>
> Done now (10 and 9). Cheers!
>
>
> Segher
--
[-- Attachment #1.2: patch-gcc_configure --]
[-- Type: text/plain, Size: 433 bytes --]
--- gcc/configure.orig 2021-04-29 10:19:44 UTC
+++ gcc/configure
@@ -29405,7 +29405,7 @@ $as_echo "#define HAVE_LD_PPC_GNU_ATTR_LONG_DOUBLE 1"
esac
case "$target:$tm_file" in
- powerpc64-*-freebsd* | powerpc64*-*-linux* | powerpc*-*-linux*rs6000/biarch64.h*)
+ powerpc64*-*-freebsd* | powerpc64*-*-linux* | powerpc*-*-linux*rs6000/biarch64.h*)
case "$target" in
*le-*-linux*)
emul_name="-melf64lppc"
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-09-10 23:26 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-14 15:35 rs6000: add support for powerpc64le-unknown-freebsd Piotr Kubaj
2020-12-14 16:46 ` Segher Boessenkool
2020-12-14 23:29 ` Gerald Pfeifer
2020-12-15 0:30 ` Segher Boessenkool
2020-12-16 22:58 ` Segher Boessenkool
2020-12-28 11:44 ` Gerald Pfeifer
2020-12-28 12:37 ` Segher Boessenkool
2021-09-10 23:26 ` Piotr Kubaj
2020-12-14 23:37 ` Gerald Pfeifer
2020-12-14 23:52 ` Piotr Kubaj
2020-12-16 22:23 ` Segher Boessenkool
2021-04-29 11:37 ` Piotr Kubaj
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).