[PATCH, V2] PR target/70243: Do not generate vmaddfp and vnmsubfp

[Michael Meissner <meissner@linux.ibm.com>]

This is version 2 of the patch.  The first version was posted on April 6th.

In this version, I eliminated the changes to Altivec.md that added checks to
altivec_fmav4sf4 and altivec_vnmsubfp.  After writing the code, I remembered
that VECTOR_UNIT_ALTIVEC_P that is used by those insns will not be true if the
VSX instruction set is enabled, so no additional test is needed.

As we discussed in a private chat room, I modified the code to generate vmaddfp
and vnmsubfp if -Ofast (-ffast-math) is used.  This allows the compiler to
eliminate the extra move if the user does not care about strict floating point
code generation, but it generates only the VSX instructions in the normal
case.

I reworked the examples and split them into two tests to test both the normal
case when -Ofast is not used and when it is used.

I also fixed the instructions mentioned in the comments to be the actual
instructions (vmaddfp and vnmsubfp) instead of fmaddfp and fnmsubdp.  Sorry
about tat.

The AltiVec (VMX) instructions vmaddfp and vnmsubfp have different rounding
behaviors than the VSX xvmadd{a,m}sp and xvnmsub{a,m}sp instructions.  In
particular, generating these instructions seems to break Eigen.

The bug is that GCC has generated the VMX vmaddfp and vnmsubfp instructions on
VSX systems as an alternative to the xsmadd{a,m}sp and xsnmsub{a,m}sp
instructions.  The advantage of the VMX instructions is that they are 4 operand
instructions (i.e. the target register does not have to overlap with one of the
input registers).  This can mean that the compiler can eliminate an extra move
instruction. The disadvantage of generating these instructions is it does not
round the same was as the VSX instructions.

This patch will only generate the VMX vmaddfp and vnmsubfp instructions as
alternatives in the VSX instruction insn support if -Ofast (-ffast-math) is
used.  I also added 2 tests to the regression suite.

I have done bootstrap builds on power9 little endian (with both IEEE long
double and IBM long double).  I have also done the builds and test on a power8
big endian system (testing both 32-bit and 64-bit code generation).  Chip has
verified that it fixes the problem that Eigen encountered.  Can I check this
into the master GCC branch?  After a burn-in period, can I check this patch
into the active GCC branches?

Thanks in advance.

2023-04-07   Michael Meissner  <meissner@linux.ibm.com>

gcc/

	PR target/70243
	* config/rs6000/rs6000.md (isa attribute): Add fastmath.
	(enabled attribute): Add support for fastmath.
	* config/rs6000/vsx.md (vsx_fmav4sf4): Set the isa attribute to
	fastmath to disable Altivec instruction generatins normally.
	(vsx_nfmsv4sf4): Likewise.

gcc/testsuite/

	PR target/70243
	* gcc.target/powerpc/pr70243.c: New test.
	* gcc.target/powerpc/pr70243-2.c: New test.
---
 gcc/config/rs6000/rs6000.md                  |  6 ++-
 gcc/config/rs6000/vsx.md                     | 17 ++++----
 gcc/testsuite/gcc.target/powerpc/pr70243-2.c | 41 ++++++++++++++++++++
 gcc/testsuite/gcc.target/powerpc/pr70243.c   | 41 ++++++++++++++++++++
 4 files changed, 97 insertions(+), 8 deletions(-)
 create mode 100644 gcc/testsuite/gcc.target/powerpc/pr70243-2.c
 create mode 100644 gcc/testsuite/gcc.target/powerpc/pr70243.c

diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
index 44f7dd509cb..7fea6a40e0c 100644
--- a/gcc/config/rs6000/rs6000.md
+++ b/gcc/config/rs6000/rs6000.md
@@ -354,7 +354,7 @@ (define_attr "cpu"
   (const (symbol_ref "(enum attr_cpu) rs6000_tune")))
 
 ;; The ISA we implement.
-(define_attr "isa" "any,p5,p6,p7,p7v,p8v,p9,p9v,p9kf,p9tf,p10"
+(define_attr "isa" "any,p5,p6,p7,p7v,p8v,p9,p9v,p9kf,p9tf,p10,fastmath"
   (const_string "any"))
 
 ;; Is this alternative enabled for the current CPU/ISA/etc.?
@@ -402,6 +402,10 @@ (define_attr "enabled" ""
      (and (eq_attr "isa" "p10")
 	  (match_test "TARGET_POWER10"))
      (const_int 1)
+
+     (and (eq_attr "isa" "fastmath")
+	  (match_test "flag_unsafe_math_optimizations"))
+     (const_int 1)
     ] (const_int 0)))
 
 ;; If this instruction is microcoded on the CELL processor
diff --git a/gcc/config/rs6000/vsx.md b/gcc/config/rs6000/vsx.md
index 0865608f94a..7f64a2dd356 100644
--- a/gcc/config/rs6000/vsx.md
+++ b/gcc/config/rs6000/vsx.md
@@ -2009,11 +2009,12 @@ (define_insn "*vsx_tsqrt<mode>2_internal"
   "x<VSv>tsqrt<sd>p %0,%x1"
   [(set_attr "type" "<VStype_simple>")])
 
-;; Fused vector multiply/add instructions. Support the classical Altivec
-;; versions of fma, which allows the target to be a separate register from the
-;; 3 inputs.  Under VSX, the target must be either the addend or the first
-;; multiply.
-
+;; Fused vector multiply/add instructions. Under VSX, the target must be either
+;; the addend or the first multiply.  If the user used -Ofast, also support the
+;; classical VMX versions of fma (vmaddfp and vnmsubfp), which allows the
+;; target to be a separate register from the 3 inputs.  This restriction is due
+;; to the fact that vmaddfp and vnmsubfp have different rounding behaviors
+;; compared to xvmadd{a,m}sp or xvnmsub{a,m}sp.
 (define_insn "*vsx_fmav4sf4"
   [(set (match_operand:V4SF 0 "vsx_register_operand" "=wa,wa,v")
 	(fma:V4SF
@@ -2025,7 +2026,8 @@ (define_insn "*vsx_fmav4sf4"
    xvmaddasp %x0,%x1,%x2
    xvmaddmsp %x0,%x1,%x3
    vmaddfp %0,%1,%2,%3"
-  [(set_attr "type" "vecfloat")])
+  [(set_attr "type" "vecfloat")
+   (set_attr "isa" "*,*,fastmath")])
 
 (define_insn "*vsx_fmav2df4"
   [(set (match_operand:V2DF 0 "vsx_register_operand" "=wa,wa")
@@ -2078,7 +2080,8 @@ (define_insn "*vsx_nfmsv4sf4"
    xvnmsubasp %x0,%x1,%x2
    xvnmsubmsp %x0,%x1,%x3
    vnmsubfp %0,%1,%2,%3"
-  [(set_attr "type" "vecfloat")])
+  [(set_attr "type" "vecfloat")
+   (set_attr "isa" "*,*,fastmath")])
 
 (define_insn "*vsx_nfmsv2df4"
   [(set (match_operand:V2DF 0 "vsx_register_operand" "=wa,wa")
diff --git a/gcc/testsuite/gcc.target/powerpc/pr70243-2.c b/gcc/testsuite/gcc.target/powerpc/pr70243-2.c
new file mode 100644
index 00000000000..ef475f39b12
--- /dev/null
+++ b/gcc/testsuite/gcc.target/powerpc/pr70243-2.c
@@ -0,0 +1,41 @@
+/* { dg-do compile */
+/* { dg-require-effective-target powerpc_vsx_ok } */
+/* { dg-options "-Ofast -mvsx" } */
+
+/* PR 70423.  Make sure we don't generate vmaddfp or vnmsubfp unless -Ofast is
+   used.  These instructions do not round the same way the normal VSX
+   instructions do.  These tests are written where the 3 inputs and target are
+   all separate registers where the register allocator would prefer to issue
+   the 4 argument FMA instruction over the 3 argument instruction plus an extra
+   move.  */
+
+#include <altivec.h>
+
+vector float
+do_add1 (vector float dummy, vector float a, vector float b, vector float c)
+{
+  return (a * b) + c;
+}
+
+vector float
+do_nsub1 (vector float dummy, vector float a, vector float b, vector float c)
+{
+  return -((a * b) - c);
+}
+
+vector float
+do_add2 (vector float dummy, vector float a, vector float b, vector float c)
+{
+  return vec_madd (a, b, c);
+}
+
+vector float
+do_nsub2 (vector float dummy, vector float a, vector float b, vector float c)
+{
+  return vec_nmsub (a, b, c);
+}
+
+/* { dg-final { scan-assembler-not {\mxvmadd[am]sp\M}  } } */
+/* { dg-final { scan-assembler-not {\mxvnmsub[am]sp\M} } } */
+/* { dg-final { scan-assembler     {\mvmaddfp\M}       } } */
+/* { dg-final { scan-assembler     {\mvnmsubfp\M}      } } */
diff --git a/gcc/testsuite/gcc.target/powerpc/pr70243.c b/gcc/testsuite/gcc.target/powerpc/pr70243.c
new file mode 100644
index 00000000000..c1a5c676fc3
--- /dev/null
+++ b/gcc/testsuite/gcc.target/powerpc/pr70243.c
@@ -0,0 +1,41 @@
+/* { dg-do compile */
+/* { dg-require-effective-target powerpc_vsx_ok } */
+/* { dg-options "-O2 -mvsx" } */
+
+/* PR 70423.  Make sure we don't generate vmaddfp or vnmsubfp unless -Ofast is
+   used.  These instructions do not round the same way the normal VSX
+   instructions do.  These tests are written where the 3 inputs and target are
+   all separate registers where the register allocator would prefer to issue
+   the 4 argument FMA instruction over the 3 argument instruction plus an extra
+   move.  */
+
+#include <altivec.h>
+
+vector float
+do_add1 (vector float dummy, vector float a, vector float b, vector float c)
+{
+  return (a * b) + c;
+}
+
+vector float
+do_nsub1 (vector float dummy, vector float a, vector float b, vector float c)
+{
+  return -((a * b) - c);
+}
+
+vector float
+do_add2 (vector float dummy, vector float a, vector float b, vector float c)
+{
+  return vec_madd (a, b, c);
+}
+
+vector float
+do_nsub2 (vector float dummy, vector float a, vector float b, vector float c)
+{
+  return vec_nmsub (a, b, c);
+}
+
+/* { dg-final { scan-assembler     {\mxvmadd[am]sp\M}  } } */
+/* { dg-final { scan-assembler     {\mxvnmsub[am]sp\M} } } */
+/* { dg-final { scan-assembler-not {\mvmaddfp\M}       } } */
+/* { dg-final { scan-assembler-not {\mvnmsubfp\M}      } } */
-- 
2.39.2


-- 
Michael Meissner, IBM
PO Box 98, Ayer, Massachusetts, USA, 01432
email: meissner@linux.ibm.com