From: Richard Biener <rguenther@suse.de>
To: Tom de Vries <Tom_deVries@mentor.com>
Cc: "gcc-patches@gnu.org" <gcc-patches@gnu.org>,
Jakub Jelinek <jakub@redhat.com>
Subject: Re: [PATCH, 10/16] Add pass_oacc_kernels pass group in passes.def
Date: Fri, 20 Nov 2015 10:37:00 -0000 [thread overview]
Message-ID: <alpine.LSU.2.11.1511201128590.4884@t29.fhfr.qr> (raw)
In-Reply-To: <564DA4CA.3020506@mentor.com>
On Thu, 19 Nov 2015, Tom de Vries wrote:
> On 16/11/15 13:45, Richard Biener wrote:
> > > I've eliminated all the uses for pass_tree_loop_init/pass_tree_loop_done
> > > in
> > > >the pass group. Instead, I've added conditional loop optimizer setup in:
> > > >- pass_lim and pass_scev_cprop (added in this patch), and
>
> Reposting the "Add pass_oacc_kernels pass group in passes.def" patch.
>
> pass_scev_cprop is no longer part of the pass group.
>
> And I've dropped the scev_initialize in pass_lim.
>
> Pass_lim is part of the pass_tree_loop pass group, where AFAIU scev info is
> initialized at the start of the pass group and updated or reset by passes in
> the pass group if necessary, such that it's always available, or can be
> recalculated on the spot.
>
> First, pass_lim doesn't invalidate scev info. And second, AFAIU pass_lim
> doesn't use scev info. So there doesn't seem to be a need to do anything about
> scev info for using pass_lim outside pass_tree_loop.
>
> > > >- pass_parallelize_loops_oacc_kernels (added in patch "Add
> > > > pass_parallelize_loops_oacc_kernels").
> > You miss calling scev_finalize ().
>
> I've added the scev_finalize () in patch "Add
> pass_parallelize_loops_oacc_kernels".
pass_lim::execute (function *fun)
{
+ if (!loops_state_satisfies_p (LOOPS_NORMAL
+ | LOOPS_HAVE_RECORDED_EXITS))
+ loop_optimizer_init (LOOPS_NORMAL
+ | LOOPS_HAVE_RECORDED_EXITS);
+
note that this will, when not in the loop pipeline, not properly
fixup loops if LOOPS_NEED_FIXUP is set (that doesn't clear other
loop flags). I'd rather make loop_optimizer_init do nothing
if requested flags are already set and no fixup is needed and
call the above unconditionally. Thus sth like
Index: gcc/loop-init.c
===================================================================
--- gcc/loop-init.c (revision 230649)
+++ gcc/loop-init.c (working copy)
@@ -103,7 +103,11 @@ loop_optimizer_init (unsigned flags)
calculate_dominance_info (CDI_DOMINATORS);
if (!needs_fixup)
- checking_verify_loop_structure ();
+ {
+ checking_verify_loop_structure ();
+ if (loops_state_satisfies_p (flags))
+ goto out;
+ }
/* Clear all flags. */
if (recorded_exits)
@@ -122,11 +126,12 @@ loop_optimizer_init (unsigned flags)
/* Apply flags to loops. */
apply_loop_flags (flags);
+ checking_verify_loop_structure ();
+
+out:
/* Dump loops. */
flow_loops_dump (dump_file, NULL, 1);
- checking_verify_loop_structure ();
-
timevar_pop (TV_LOOP_INIT);
}
if (number_of_loops (fun) <= 1)
return 0;
+ if (!loops_state_satisfies_p (LOOP_CLOSED_SSA))
+ rewrite_into_loop_closed_ssa (NULL, TODO_update_ssa);
+
return tree_ssa_lim ();
}
that looks bogus. The into-loop-closed SSA rewrite should be
only done if the state _satisfies_ it. I understand LIM doesn't
require loop-closed SSA. But it also doesn't destroy it obviously.
So just remove that.
> Thanks,
> - Tom
>
>
--
Richard Biener <rguenther@suse.de>
SUSE LINUX GmbH, GF: Felix Imendoerffer, Jane Smithard, Graham Norton, HRB 21284 (AG Nuernberg)
next prev parent reply other threads:[~2015-11-20 10:37 UTC|newest]
Thread overview: 133+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-09 15:35 [PATCH series, 16] Use parloops to parallelize oacc kernels regions Tom de Vries
2015-11-09 15:44 ` [PATCH, 1/16] Insert new exit block only when needed in transform_to_exit_first_loop_alt Tom de Vries
2015-11-11 10:50 ` Richard Biener
2015-11-09 15:45 ` [PATCH, 2/16] Make create_parallel_loop return void Tom de Vries
2015-11-11 10:50 ` Richard Biener
2015-11-09 15:51 ` [PATCH, 3/16] Ignore reduction clause on kernels directive Tom de Vries
2015-11-24 12:25 ` [PING][PATCH, " Tom de Vries
2016-01-18 14:24 ` [PING^2][PATCH, " Tom de Vries
2016-01-18 14:26 ` Jakub Jelinek
2015-11-09 16:10 ` [PATCH, 4/16] Implement -foffload-alias Tom de Vries
2015-11-11 10:53 ` Richard Biener
2015-11-11 11:01 ` Jakub Jelinek
2015-11-12 16:04 ` Tom de Vries
2015-11-13 8:46 ` Richard Biener
2015-11-13 11:03 ` Tom de Vries
2015-11-13 11:30 ` Richard Biener
2015-11-13 11:39 ` Jakub Jelinek
2015-11-21 12:24 ` Tom de Vries
2015-11-23 11:46 ` Richard Biener
2015-11-27 11:44 ` Tom de Vries
2015-11-27 12:14 ` Tom de Vries
2015-12-02 9:59 ` Jakub Jelinek
2016-03-14 13:16 ` Tom de Vries
2016-03-14 23:18 ` Tom de Vries
2015-12-02 9:46 ` Jakub Jelinek
2015-12-02 13:11 ` Tom de Vries
2015-12-11 12:45 ` Tom de Vries
2015-12-11 13:00 ` Richard Biener
2015-12-13 16:38 ` Tom de Vries
2015-12-14 13:26 ` Richard Biener
2015-12-14 15:44 ` Tom de Vries
2015-12-16 13:16 ` Richard Biener
2015-12-16 14:43 ` Tom de Vries
2015-12-17 12:03 ` [gomp4] " Thomas Schwinge
2015-12-03 11:53 ` Tom de Vries
2015-11-09 16:31 ` [PATCH, 5/16] Add in_oacc_kernels_region in struct loop Tom de Vries
2015-11-11 10:57 ` Richard Biener
2015-11-16 11:39 ` Tom de Vries
2015-11-16 11:39 ` Tom de Vries
2015-11-16 12:41 ` Richard Biener
2015-11-09 17:39 ` [PATCH, 6/16] Add pass_oacc_kernels Tom de Vries
2015-11-11 10:59 ` Richard Biener
2015-11-19 13:51 ` Tom de Vries
2015-11-24 12:17 ` Tom de Vries
2015-11-25 10:42 ` Richard Biener
2016-02-05 12:06 ` Use plain -fopenacc to enable OpenACC kernels processing (was: [PATCH, 6/16] Add pass_oacc_kernels) Thomas Schwinge
2016-02-10 14:40 ` Use plain -fopenacc to enable OpenACC kernels processing Thomas Schwinge
2016-02-15 16:54 ` Tom de Vries
2016-02-23 15:19 ` Thomas Schwinge
2015-11-09 18:14 ` [PATCH, 7/16] Add pass_dominator_oacc_kernels Tom de Vries
2015-11-11 11:05 ` Richard Biener
2015-11-16 12:04 ` Tom de Vries
2015-11-09 18:34 ` [PATCH, 8/16] Add pass_ch_oacc_kernels Tom de Vries
2015-11-11 20:29 ` Tom de Vries
2015-11-30 12:12 ` [gomp4] Use pass_ch instead of pass_ch_oacc_kernels (was: [PATCH, 8/16] Add pass_ch_oacc_kernels) Thomas Schwinge
2015-11-09 19:53 ` [PATCH, 9/16] Add pass_parallelize_loops_oacc_kernels Tom de Vries
2015-11-16 11:59 ` Tom de Vries
2015-11-24 12:27 ` Tom de Vries
2015-12-13 16:58 ` [PIING][PATCH, " Tom de Vries
2015-12-14 15:23 ` Richard Biener
2016-01-16 22:41 ` [Committed] Move pass_expand_omp_ssa out of pass_parallelize_loops Tom de Vries
2016-01-18 12:59 ` [Committed] Allow pass_parallelize_loops to be run outside the loop pipeline Tom de Vries
2016-01-18 13:07 ` [committed] Add oacc_kernels_p argument to pass_parallelize_loops Tom de Vries
2016-01-18 13:30 ` [committed] Add pass_parallelize_loops to pass_oacc_kernels Tom de Vries
2016-01-20 8:54 ` [committed] Add oacc_kernels_p argument to pass_parallelize_loops Thomas Schwinge
2016-01-20 10:31 ` Tom de Vries
2015-11-09 19:59 ` [PATCH, 10/16] Add pass_oacc_kernels pass group in passes.def Tom de Vries
2015-11-11 11:03 ` Richard Biener
2015-11-16 11:55 ` Tom de Vries
2015-11-16 12:45 ` Richard Biener
2015-11-16 23:21 ` Tom de Vries
2015-11-17 10:05 ` Richard Biener
2015-11-17 14:54 ` Tom de Vries
2015-11-17 15:18 ` Richard Biener
2015-11-17 15:39 ` Tom de Vries
2015-11-17 22:21 ` [PATCH, PR68373 ] Call scev_const_prop in pass_parallelize_loops::execute Tom de Vries
2015-11-19 9:36 ` Tom de Vries
2015-11-20 10:15 ` Richard Biener
2015-11-18 8:30 ` [PATCH, 10/16] Add pass_oacc_kernels pass group in passes.def Richard Biener
2015-11-18 16:22 ` Bernhard Reutner-Fischer
2015-11-20 12:53 ` [committed, trivial] Fix typo and trailing whitespace in dump-file strings in parloops Tom de Vries
2015-11-19 0:35 ` [PATCH, 10/16] Add pass_oacc_kernels pass group in passes.def Tom de Vries
2015-11-20 10:28 ` Richard Biener
2015-11-21 8:42 ` Tom de Vries
2015-11-23 11:31 ` Richard Biener
2015-11-23 15:53 ` Tom de Vries
2015-11-23 16:38 ` Richard Biener
2015-11-19 10:31 ` Tom de Vries
2015-11-20 10:37 ` Richard Biener [this message]
2015-11-20 13:27 ` Tom de Vries
2015-11-20 13:29 ` Richard Biener
2015-11-20 16:34 ` Tom de Vries
2015-11-23 10:11 ` Richard Biener
2015-11-24 12:22 ` Tom de Vries
2015-11-24 13:19 ` Richard Biener
2015-11-24 14:33 ` Tom de Vries
2015-11-24 14:36 ` Richard Biener
2015-11-24 15:05 ` Tom de Vries
2015-11-25 10:43 ` Richard Biener
2015-11-25 10:44 ` Richard Biener
2015-11-30 17:48 ` [gomp4] " Thomas Schwinge
2015-11-22 23:37 ` [PATCH] Don't reapply loops flags if unnecessary in loop_optimizer_init Tom de Vries
2015-11-23 10:33 ` Richard Biener
2015-11-23 11:27 ` Tom de Vries
2015-11-09 20:02 ` [PATCH, 11/16] Update testcases after adding kernels pass group Tom de Vries
2015-11-11 11:03 ` Richard Biener
2015-11-12 14:32 ` Tom de Vries
2015-11-12 14:43 ` Richard Biener
2015-11-12 15:42 ` David Malcolm
2015-11-13 9:44 ` Richard Biener
2015-11-09 20:06 ` [PATCH, 12/16] Handle acc loop directive Tom de Vries
2015-11-24 12:30 ` [PING][PATCH, " Tom de Vries
2016-01-18 14:27 ` [PING^2][PATCH, " Tom de Vries
2016-01-26 12:38 ` [PING^3][PATCH, " Tom de Vries
2016-01-26 12:50 ` Jakub Jelinek
2016-02-12 11:11 ` Tom de Vries
2016-02-22 10:55 ` Tom de Vries
2016-02-22 10:58 ` Jakub Jelinek
2016-02-29 3:27 ` Tom de Vries
2016-03-07 8:22 ` [PING][PATCH, " Tom de Vries
2016-03-14 6:21 ` [PING^2][PATCH, " Tom de Vries
2015-11-09 20:08 ` [PATCH, 13/16] Add c-c++-common/goacc/kernels-*.c Tom de Vries
2016-01-18 13:33 ` [committed] Add oacc kernels tests in goacc Tom de Vries
2015-11-09 20:09 ` [PATCH, 14/16] Add gfortran.dg/goacc/kernels-*.f95 Tom de Vries
2015-11-09 20:11 ` [PATCH, 15/16] Add libgomp.oacc-c-c++-common/kernels-*.c Tom de Vries
2016-01-18 13:39 ` [comitted] Add oacc kernels test in libgomp Tom de Vries
2016-03-09 9:18 ` [PATCH, 15/16] Add libgomp.oacc-c-c++-common/kernels-*.c Tom de Vries
2016-03-18 12:46 ` Scan for parallelization of the oacc kernels test-cases in gfortran.dg/goacc (was: [PATCH, 15/16] Add libgomp.oacc-c-c++-common/kernels-*.c) Thomas Schwinge
2016-04-05 9:13 ` Scan for parallelization of the oacc kernels test-cases in gfortran.dg/goacc Tom de Vries
2016-04-07 15:26 ` Thomas Schwinge
2015-11-09 20:12 ` [PATCH, 16/16] Add libgomp.oacc-fortran/kernels-*.f95 Tom de Vries
2016-03-09 9:19 ` Tom de Vries
2016-03-16 13:12 ` Thomas Schwinge
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LSU.2.11.1511201128590.4884@t29.fhfr.qr \
--to=rguenther@suse.de \
--cc=Tom_deVries@mentor.com \
--cc=gcc-patches@gnu.org \
--cc=jakub@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).