public inbox for gcc-patches@gcc.gnu.org
 help / color / mirror / Atom feed
From: HAO CHEN GUI <guihaoc@linux.ibm.com>
To: gcc-patches <gcc-patches@gcc.gnu.org>
Cc: Segher Boessenkool <segher@kernel.crashing.org>,
	David <dje.gcc@gmail.com>, "Kewen.Lin" <linkw@linux.ibm.com>,
	Peter Bergner <bergner@linux.ibm.com>
Subject: Ping [PATCH v7, rs6000] Implemented f[min/max]_optab by xs[min/max]dp [PR103605]
Date: Wed, 19 Jul 2023 13:24:40 +0800	[thread overview]
Message-ID: <caa30ce6-0109-89e8-2cb2-792f7100a271@linux.ibm.com> (raw)
In-Reply-To: <1a6959ac-53c5-070b-e600-6fc1bab56ae4@linux.ibm.com>

Hi,
  As the ticket(PR107013, adding fmin/max to RTL code) is suspended, I ping
this patch. The unspec of fmin/max can be replaced with corresponding RTL
code after that ticket is fixed.

https://gcc.gnu.org/pipermail/gcc-patches/2022-September/602181.html

Thanks
Gui Haochen


在 2022/9/26 11:35, HAO CHEN GUI 写道:
> Hi,
>   This patch implements optab f[min/max]_optab by xs[min/max]dp on rs6000.
> Tests show that outputs of xs[min/max]dp are consistent with the standard
> of C99 fmin/max.
> 
>   This patch also binds __builtin_vsx_xs[min/max]dp to fmin/max instead
> of smin/max when fast-math is not set. While fast-math is set, xs[min/max]dp
> are folded to MIN/MAX_EXPR in gimple, and finally expanded to smin/max.
> 
>   Bootstrapped and tested on ppc64 Linux BE and LE with no regressions.
> Is this okay for trunk? Any recommendations? Thanks a lot.
> 
> ChangeLog
> 2022-09-26 Haochen Gui <guihaoc@linux.ibm.com>
> 
> gcc/
> 	PR target/103605
> 	* config/rs6000/rs6000-builtin.cc (rs6000_gimple_fold_builtin): Gimple
> 	fold RS6000_BIF_XSMINDP and RS6000_BIF_XSMAXDP when fast-math is set.
> 	* config/rs6000/rs6000.md (FMINMAX): New int iterator.
> 	(minmax_op): New int attribute.
> 	(UNSPEC_FMAX, UNSPEC_FMIN): New unspecs.
> 	(f<minmax_op><mode>3): New pattern by UNSPEC_FMAX and UNSPEC_FMIN.
> 	* config/rs6000/rs6000-builtins.def (__builtin_vsx_xsmaxdp): Set
> 	pattern to fmaxdf3.
> 	(__builtin_vsx_xsmindp): Set pattern to fmindf3.
> 
> gcc/testsuite/
> 	PR target/103605
> 	* gcc.dg/powerpc/pr103605.h: New.
> 	* gcc.dg/powerpc/pr103605-1.c: New.
> 	* gcc.dg/powerpc/pr103605-2.c: New.
> 
> patch.diff
> diff --git a/gcc/config/rs6000/rs6000-builtin.cc b/gcc/config/rs6000/rs6000-builtin.cc
> index e925ba9fad9..944ae9fe55c 100644
> --- a/gcc/config/rs6000/rs6000-builtin.cc
> +++ b/gcc/config/rs6000/rs6000-builtin.cc
> @@ -1588,6 +1588,8 @@ rs6000_gimple_fold_builtin (gimple_stmt_iterator *gsi)
>        gimple_set_location (g, gimple_location (stmt));
>        gsi_replace (gsi, g, true);
>        return true;
> +    /* fold into MIN_EXPR when fast-math is set.  */
> +    case RS6000_BIF_XSMINDP:
>      /* flavors of vec_min.  */
>      case RS6000_BIF_XVMINDP:
>      case RS6000_BIF_XVMINSP:
> @@ -1614,6 +1616,8 @@ rs6000_gimple_fold_builtin (gimple_stmt_iterator *gsi)
>        gimple_set_location (g, gimple_location (stmt));
>        gsi_replace (gsi, g, true);
>        return true;
> +    /* fold into MAX_EXPR when fast-math is set.  */
> +    case RS6000_BIF_XSMAXDP:
>      /* flavors of vec_max.  */
>      case RS6000_BIF_XVMAXDP:
>      case RS6000_BIF_XVMAXSP:
> diff --git a/gcc/config/rs6000/rs6000-builtins.def b/gcc/config/rs6000/rs6000-builtins.def
> index f4a9f24bcc5..8b735493b40 100644
> --- a/gcc/config/rs6000/rs6000-builtins.def
> +++ b/gcc/config/rs6000/rs6000-builtins.def
> @@ -1613,10 +1613,10 @@
>      XSCVSPDP vsx_xscvspdp {}
> 
>    const double __builtin_vsx_xsmaxdp (double, double);
> -    XSMAXDP smaxdf3 {}
> +    XSMAXDP fmaxdf3 {}
> 
>    const double __builtin_vsx_xsmindp (double, double);
> -    XSMINDP smindf3 {}
> +    XSMINDP fmindf3 {}
> 
>    const double __builtin_vsx_xsrdpi (double);
>      XSRDPI vsx_xsrdpi {}
> diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
> index bf85baa5370..ae0dd98f0f9 100644
> --- a/gcc/config/rs6000/rs6000.md
> +++ b/gcc/config/rs6000/rs6000.md
> @@ -158,6 +158,8 @@ (define_c_enum "unspec"
>     UNSPEC_HASHCHK
>     UNSPEC_XXSPLTIDP_CONST
>     UNSPEC_XXSPLTIW_CONST
> +   UNSPEC_FMAX
> +   UNSPEC_FMIN
>    ])
> 
>  ;;
> @@ -5341,6 +5343,22 @@ (define_insn_and_split "*s<minmax><mode>3_fpr"
>    DONE;
>  })
> 
> +
> +(define_int_iterator FMINMAX [UNSPEC_FMAX UNSPEC_FMIN])
> +
> +(define_int_attr  minmax_op [(UNSPEC_FMAX "max")
> +			     (UNSPEC_FMIN "min")])
> +
> +(define_insn "f<minmax_op><mode>3"
> +  [(set (match_operand:SFDF 0 "vsx_register_operand" "=wa")
> +	(unspec:SFDF [(match_operand:SFDF 1 "vsx_register_operand" "wa")
> +		      (match_operand:SFDF 2 "vsx_register_operand" "wa")]
> +		     FMINMAX))]
> +  "TARGET_VSX && !flag_finite_math_only"
> +  "xs<minmax_op>dp %x0,%x1,%x2"
> +  [(set_attr "type" "fp")]
> +)
> +
>  (define_expand "mov<mode>cc"
>     [(set (match_operand:GPR 0 "gpc_reg_operand")
>  	 (if_then_else:GPR (match_operand 1 "comparison_operator")
> diff --git a/gcc/testsuite/gcc.target/powerpc/pr103605-1.c b/gcc/testsuite/gcc.target/powerpc/pr103605-1.c
> new file mode 100644
> index 00000000000..923deec6a1e
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/powerpc/pr103605-1.c
> @@ -0,0 +1,7 @@
> +/* { dg-do compile } */
> +/* { dg-require-effective-target powerpc_vsx_ok } */
> +/* { dg-options "-O2 -mvsx" } */
> +/* { dg-final { scan-assembler-times {\mxsmaxdp\M} 3 } } */
> +/* { dg-final { scan-assembler-times {\mxsmindp\M} 3 } } */
> +
> +#include "pr103605.h"
> diff --git a/gcc/testsuite/gcc.target/powerpc/pr103605-2.c b/gcc/testsuite/gcc.target/powerpc/pr103605-2.c
> new file mode 100644
> index 00000000000..f50fe9468f5
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/powerpc/pr103605-2.c
> @@ -0,0 +1,9 @@
> +/* { dg-do compile } */
> +/* { dg-require-effective-target powerpc_vsx_ok } */
> +/* { dg-options "-O2 -mvsx -ffast-math" } */
> +/* { dg-final { scan-assembler-times {\mxsmaxcdp\M} 3 { target has_arch_pwr9 } } } */
> +/* { dg-final { scan-assembler-times {\mxsmincdp\M} 3 { target has_arch_pwr9 } } } */
> +/* { dg-final { scan-assembler-times {\mxsmaxdp\M} 3 { target { ! has_arch_pwr9 } } } } */
> +/* { dg-final { scan-assembler-times {\mxsmindp\M} 3 { target { ! has_arch_pwr9 } } } } */
> +
> +#include "pr103605.h"
> diff --git a/gcc/testsuite/gcc.target/powerpc/pr103605.h b/gcc/testsuite/gcc.target/powerpc/pr103605.h
> new file mode 100644
> index 00000000000..c99dfe6d7eb
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/powerpc/pr103605.h
> @@ -0,0 +1,31 @@
> +#include <math.h>
> +
> +double test1 (double d0, double d1)
> +{
> +  return fmin (d0, d1);
> +}
> +
> +float test2 (float d0, float d1)
> +{
> +  return fmin (d0, d1);
> +}
> +
> +double test3 (double d0, double d1)
> +{
> +  return fmax (d0, d1);
> +}
> +
> +float test4 (float d0, float d1)
> +{
> +  return fmax (d0, d1);
> +}
> +
> +double test5 (double d0, double d1)
> +{
> +  return __builtin_vsx_xsmindp (d0, d1);
> +}
> +
> +double test6 (double d0, double d1)
> +{
> +  return __builtin_vsx_xsmaxdp (d0, d1);
> +}
> 

  reply	other threads:[~2023-07-19  5:24 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-26  3:35 HAO CHEN GUI
2023-07-19  5:24 ` HAO CHEN GUI [this message]
2023-07-19  5:48 ` Kewen.Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=caa30ce6-0109-89e8-2cb2-792f7100a271@linux.ibm.com \
    --to=guihaoc@linux.ibm.com \
    --cc=bergner@linux.ibm.com \
    --cc=dje.gcc@gmail.com \
    --cc=gcc-patches@gcc.gnu.org \
    --cc=linkw@linux.ibm.com \
    --cc=segher@kernel.crashing.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).