From: Richard Sandiford <richard.sandiford@arm.com>
To: "Torbjörn SVENSSON" <torbjorn.svensson@foss.st.com>
Cc: <gcc-patches@gcc.gnu.org>, Yvan ROUX <yvan.roux@foss.st.com>
Subject: Re: [PATCH v3] testsuite: Only run test on target if VMA == LMA
Date: Fri, 30 Sep 2022 17:27:13 +0100 [thread overview]
Message-ID: <mptzgegltem.fsf@arm.com> (raw)
In-Reply-To: <20220930162212.2270178-1-torbjorn.svensson@foss.st.com> (=?utf-8?Q?=22Torbj=C3=B6rn?= SVENSSON"'s message of "Fri, 30 Sep 2022 18:22:13 +0200")
Torbjörn SVENSSON <torbjorn.svensson@foss.st.com> writes:
> Checking that the triplet matches arm*-*-eabi (or msp430-*-*) is not
> enough to know if the execution will enter an endless loop, or if it
> will give a meaningful result. As the execution test only work when
> VMA and LMA are equal, make sure that this condition is met.
>
> gcc/ChangeLog:
>
> * doc/sourcebuild.texi: Document new vma_equals_lma effective
> target check.
>
> gcc/testsuite/ChangeLog:
>
> * lib/target-supports.exp (check_effective_target_vma_equals_lma): New.
> * c-c++-common/torture/attr-noinit-1.c: Requre VMA == LMA to run.
> * c-c++-common/torture/attr-noinit-2.c: Likewise.
> * c-c++-common/torture/attr-noinit-3.c: Likewise.
> * c-c++-common/torture/attr-persistent-1.c: Likewise.
> * c-c++-common/torture/attr-persistent-3.c: Likewise.
OK, thanks.
Richard
> Co-Authored-By: Yvan ROUX <yvan.roux@foss.st.com>
> Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
> ---
> gcc/doc/sourcebuild.texi | 3 ++
> .../c-c++-common/torture/attr-noinit-1.c | 3 +-
> .../c-c++-common/torture/attr-noinit-2.c | 3 +-
> .../c-c++-common/torture/attr-noinit-3.c | 3 +-
> .../c-c++-common/torture/attr-persistent-1.c | 3 +-
> .../c-c++-common/torture/attr-persistent-3.c | 3 +-
> gcc/testsuite/lib/target-supports.exp | 49 +++++++++++++++++++
> 7 files changed, 62 insertions(+), 5 deletions(-)
>
> diff --git a/gcc/doc/sourcebuild.texi b/gcc/doc/sourcebuild.texi
> index 52357cc7aee..c81e2ffd43a 100644
> --- a/gcc/doc/sourcebuild.texi
> +++ b/gcc/doc/sourcebuild.texi
> @@ -2868,6 +2868,9 @@ Vector alignment is reachable for types of 32 bits or less.
> @item vector_alignment_reachable_for_64bit
> Vector alignment is reachable for types of 64 bits or less.
>
> +@item vma_equals_lma
> +Target generates executable with VMA equal to LMA for .data section.
> +
> @item wchar_t_char16_t_compatible
> Target supports @code{wchar_t} that is compatible with @code{char16_t}.
>
> diff --git a/gcc/testsuite/c-c++-common/torture/attr-noinit-1.c b/gcc/testsuite/c-c++-common/torture/attr-noinit-1.c
> index 877e7647ac9..f84eba0b649 100644
> --- a/gcc/testsuite/c-c++-common/torture/attr-noinit-1.c
> +++ b/gcc/testsuite/c-c++-common/torture/attr-noinit-1.c
> @@ -1,4 +1,5 @@
> -/* { dg-do run } */
> +/* { dg-do link } */
> +/* { dg-do run { target { vma_equals_lma } } } */
> /* { dg-require-effective-target noinit } */
> /* { dg-skip-if "data LMA != VMA" { msp430-*-* } { "-mlarge" } } */
> /* { dg-options "-save-temps" } */
> diff --git a/gcc/testsuite/c-c++-common/torture/attr-noinit-2.c b/gcc/testsuite/c-c++-common/torture/attr-noinit-2.c
> index befa2a0bd52..4528b9e3cfa 100644
> --- a/gcc/testsuite/c-c++-common/torture/attr-noinit-2.c
> +++ b/gcc/testsuite/c-c++-common/torture/attr-noinit-2.c
> @@ -1,4 +1,5 @@
> -/* { dg-do run } */
> +/* { dg-do link } */
> +/* { dg-do run { target { vma_equals_lma } } } */
> /* { dg-require-effective-target noinit } */
> /* { dg-options "-fdata-sections -save-temps" } */
> /* { dg-skip-if "data LMA != VMA" { msp430-*-* } { "-mlarge" } } */
> diff --git a/gcc/testsuite/c-c++-common/torture/attr-noinit-3.c b/gcc/testsuite/c-c++-common/torture/attr-noinit-3.c
> index 519e88a59a6..2f1745694c9 100644
> --- a/gcc/testsuite/c-c++-common/torture/attr-noinit-3.c
> +++ b/gcc/testsuite/c-c++-common/torture/attr-noinit-3.c
> @@ -1,4 +1,5 @@
> -/* { dg-do run } */
> +/* { dg-do link } */
> +/* { dg-do run { target { vma_equals_lma } } } */
> /* { dg-require-effective-target noinit } */
> /* { dg-options "-flto -save-temps" } */
> /* { dg-skip-if "data LMA != VMA" { msp430-*-* } { "-mlarge" } } */
> diff --git a/gcc/testsuite/c-c++-common/torture/attr-persistent-1.c b/gcc/testsuite/c-c++-common/torture/attr-persistent-1.c
> index 72dc3c27192..b11a515cef8 100644
> --- a/gcc/testsuite/c-c++-common/torture/attr-persistent-1.c
> +++ b/gcc/testsuite/c-c++-common/torture/attr-persistent-1.c
> @@ -1,4 +1,5 @@
> -/* { dg-do run } */
> +/* { dg-do link } */
> +/* { dg-do run { target { vma_equals_lma } } } */
> /* { dg-require-effective-target persistent } */
> /* { dg-skip-if "data LMA != VMA" { msp430-*-* } { "-mlarge" } } */
> /* { dg-options "-save-temps" } */
> diff --git a/gcc/testsuite/c-c++-common/torture/attr-persistent-3.c b/gcc/testsuite/c-c++-common/torture/attr-persistent-3.c
> index 3e4fd28618d..068a72af5c8 100644
> --- a/gcc/testsuite/c-c++-common/torture/attr-persistent-3.c
> +++ b/gcc/testsuite/c-c++-common/torture/attr-persistent-3.c
> @@ -1,4 +1,5 @@
> -/* { dg-do run } */
> +/* { dg-do link } */
> +/* { dg-do run { target { vma_equals_lma } } } */
> /* { dg-require-effective-target persistent } */
> /* { dg-options "-flto -save-temps" } */
> /* { dg-skip-if "data LMA != VMA" { msp430-*-* } { "-mlarge" } } */
> diff --git a/gcc/testsuite/lib/target-supports.exp b/gcc/testsuite/lib/target-supports.exp
> index 0a959c63c4a..7c9dd45f2a7 100644
> --- a/gcc/testsuite/lib/target-supports.exp
> +++ b/gcc/testsuite/lib/target-supports.exp
> @@ -370,6 +370,55 @@ proc check_weak_override_available { } {
> return [check_weak_available]
> }
>
> +# Return 1 if VMA is equal to LMA for the .data section, 0
> +# otherwise. Cache the result.
> +
> +proc check_effective_target_vma_equals_lma { } {
> + global tool
> +
> + return [check_cached_effective_target vma_equals_lma {
> + set src vma_equals_lma[pid].c
> + set exe vma_equals_lma[pid].exe
> + verbose "check_effective_target_vma_equals_lma compiling testfile $src" 2
> + set f [open $src "w"]
> + puts $f "#ifdef __cplusplus\nextern \"C\"\n#endif\n"
> + puts $f "int foo = 42; void main() {}"
> + close $f
> + set lines [${tool}_target_compile $src $exe executable ""]
> + file delete $src
> +
> + if [string match "" $lines] then {
> + # No error messages
> +
> + set objdump_name [find_binutils_prog objdump]
> + set output [remote_exec host "$objdump_name" "--section-headers --section=.data $exe"]
> + set output [lindex $output 1]
> +
> + remote_file build delete $exe
> +
> + # Example output of objdump:
> + #vma_equals_lma9059.exe: file format elf32-littlearm
> + #
> + #Sections:
> + #Idx Name Size VMA LMA File off Algn
> + # 6 .data 00000558 20000000 08002658 00020000 2**3
> + # CONTENTS, ALLOC, LOAD, DATA
> +
> + # Capture LMA and VMA columns for .data section
> + if ![ regexp {\d*\d+\s+\.data\s+\d+\s+(\d+)\s+(\d+)} $output dummy vma lma ] {
> + verbose "Could not parse objdump output" 2
> + return 0
> + } else {
> + return [string equal $vma $lma]
> + }
> + } else {
> + remote_file build delete $exe
> + verbose "Could not determine if VMA is equal to LMA. Assuming not equal." 2
> + return 0
> + }
> + }]
> +}
> +
> # The "noinit" attribute is only supported by some targets.
> # This proc returns 1 if it's supported, 0 if it's not.
prev parent reply other threads:[~2022-09-30 16:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-30 16:22 Torbjörn SVENSSON
2022-09-30 16:27 ` Richard Sandiford [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=mptzgegltem.fsf@arm.com \
--to=richard.sandiford@arm.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=torbjorn.svensson@foss.st.com \
--cc=yvan.roux@foss.st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).