From: Richard Biener <rguenther@suse.de>
To: "juzhe.zhong@rivai.ai" <juzhe.zhong@rivai.ai>
Cc: gcc-patches <gcc-patches@gcc.gnu.org>,
"richard.sandiford" <richard.sandiford@arm.com>,
linkw <linkw@linux.ibm.com>
Subject: Re: [PATCH V3] VECT: Change flow of decrement IV
Date: Fri, 2 Jun 2023 08:56:15 +0000 (UTC) [thread overview]
Message-ID: <nycvar.YFH.7.77.849.2306020856100.4723@jbgna.fhfr.qr> (raw)
In-Reply-To: <489BFF1AE94B6B81+2023060113000785279135@rivai.ai>
On Thu, 1 Jun 2023, juzhe.zhong@rivai.ai wrote:
> This patch is no difference from V2.
> Just add PR tree-optimization/109971 as Kewen's suggested.
>
> Already bootstrapped and Regression on X86 no difference.
>
> Ok for trunk ?
OK.
Richard.
>
> juzhe.zhong@rivai.ai
>
> From: juzhe.zhong
> Date: 2023-06-01 12:36
> To: gcc-patches
> CC: richard.sandiford; rguenther; linkw; Ju-Zhe Zhong
> Subject: [PATCH V3] VECT: Change flow of decrement IV
> From: Ju-Zhe Zhong <juzhe.zhong@rivai.ai>
>
> Follow Richi's suggestion, I change current decrement IV flow from:
>
> do {
> remain -= MIN (vf, remain);
> } while (remain != 0);
>
> into:
>
> do {
> old_remain = remain;
> len = MIN (vf, remain);
> remain -= vf;
> } while (old_remain >= vf);
>
> to enhance SCEV.
>
> Include fixes from kewen.
>
>
> This patch will need to wait for Kewen's test feedback.
>
> Testing on X86 is on-going
>
> Co-Authored by: Kewen Lin <linkw@linux.ibm.com>
>
> PR tree-optimization/109971
>
> gcc/ChangeLog:
>
> * tree-vect-loop-manip.cc (vect_set_loop_controls_directly): Change decrement IV flow.
> (vect_set_loop_condition_partial_vectors): Ditto.
>
> ---
> gcc/tree-vect-loop-manip.cc | 36 +++++++++++++++++++++++++-----------
> 1 file changed, 25 insertions(+), 11 deletions(-)
>
> diff --git a/gcc/tree-vect-loop-manip.cc b/gcc/tree-vect-loop-manip.cc
> index acf3642ceb2..3f735945e67 100644
> --- a/gcc/tree-vect-loop-manip.cc
> +++ b/gcc/tree-vect-loop-manip.cc
> @@ -483,7 +483,7 @@ vect_set_loop_controls_directly (class loop *loop, loop_vec_info loop_vinfo,
> gimple_stmt_iterator loop_cond_gsi,
> rgroup_controls *rgc, tree niters,
> tree niters_skip, bool might_wrap_p,
> - tree *iv_step)
> + tree *iv_step, tree *compare_step)
> {
> tree compare_type = LOOP_VINFO_RGROUP_COMPARE_TYPE (loop_vinfo);
> tree iv_type = LOOP_VINFO_RGROUP_IV_TYPE (loop_vinfo);
> @@ -538,9 +538,9 @@ vect_set_loop_controls_directly (class loop *loop, loop_vec_info loop_vinfo,
> ...
> vect__4.8_28 = .LEN_LOAD (_17, 32B, _36, 0);
> ...
> - ivtmp_35 = ivtmp_9 - _36;
> + ivtmp_35 = ivtmp_9 - POLY_INT_CST [4, 4];
> ...
> - if (ivtmp_35 != 0)
> + if (ivtmp_9 > POLY_INT_CST [4, 4])
> goto <bb 4>; [83.33%]
> else
> goto <bb 5>; [16.67%]
> @@ -549,13 +549,15 @@ vect_set_loop_controls_directly (class loop *loop, loop_vec_info loop_vinfo,
> tree step = rgc->controls.length () == 1 ? rgc->controls[0]
> : make_ssa_name (iv_type);
> /* Create decrement IV. */
> - create_iv (nitems_total, MINUS_EXPR, step, NULL_TREE, loop, &incr_gsi,
> - insert_after, &index_before_incr, &index_after_incr);
> + create_iv (nitems_total, MINUS_EXPR, nitems_step, NULL_TREE, loop,
> + &incr_gsi, insert_after, &index_before_incr,
> + &index_after_incr);
> gimple_seq_add_stmt (header_seq, gimple_build_assign (step, MIN_EXPR,
> index_before_incr,
> nitems_step));
> *iv_step = step;
> - return index_after_incr;
> + *compare_step = nitems_step;
> + return index_before_incr;
> }
> /* Create increment IV. */
> @@ -825,6 +827,7 @@ vect_set_loop_condition_partial_vectors (class loop *loop,
> arbitrarily pick the last. */
> tree test_ctrl = NULL_TREE;
> tree iv_step = NULL_TREE;
> + tree compare_step = NULL_TREE;
> rgroup_controls *rgc;
> rgroup_controls *iv_rgc = nullptr;
> unsigned int i;
> @@ -861,7 +864,7 @@ vect_set_loop_condition_partial_vectors (class loop *loop,
> &preheader_seq, &header_seq,
> loop_cond_gsi, rgc, niters,
> niters_skip, might_wrap_p,
> - &iv_step);
> + &iv_step, &compare_step);
> iv_rgc = rgc;
> }
> @@ -884,10 +887,21 @@ vect_set_loop_condition_partial_vectors (class loop *loop,
> /* Get a boolean result that tells us whether to iterate. */
> edge exit_edge = single_exit (loop);
> - tree_code code = (exit_edge->flags & EDGE_TRUE_VALUE) ? EQ_EXPR : NE_EXPR;
> - tree zero_ctrl = build_zero_cst (TREE_TYPE (test_ctrl));
> - gcond *cond_stmt = gimple_build_cond (code, test_ctrl, zero_ctrl,
> - NULL_TREE, NULL_TREE);
> + gcond *cond_stmt;
> + if (LOOP_VINFO_USING_DECREMENTING_IV_P (loop_vinfo))
> + {
> + gcc_assert (compare_step);
> + tree_code code = (exit_edge->flags & EDGE_TRUE_VALUE) ? LE_EXPR : GT_EXPR;
> + cond_stmt = gimple_build_cond (code, test_ctrl, compare_step, NULL_TREE,
> + NULL_TREE);
> + }
> + else
> + {
> + tree_code code = (exit_edge->flags & EDGE_TRUE_VALUE) ? EQ_EXPR : NE_EXPR;
> + tree zero_ctrl = build_zero_cst (TREE_TYPE (test_ctrl));
> + cond_stmt
> + = gimple_build_cond (code, test_ctrl, zero_ctrl, NULL_TREE, NULL_TREE);
> + }
> gsi_insert_before (&loop_cond_gsi, cond_stmt, GSI_SAME_STMT);
> /* The loop iterates (NITERS - 1) / VF + 1 times.
>
--
Richard Biener <rguenther@suse.de>
SUSE Software Solutions Germany GmbH, Frankenstrasse 146, 90461 Nuernberg,
Germany; GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman;
HRB 36809 (AG Nuernberg)
next prev parent reply other threads:[~2023-06-02 8:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-01 4:36 juzhe.zhong
2023-06-01 5:00 ` juzhe.zhong
2023-06-01 5:24 ` Kewen.Lin
2023-06-01 8:09 ` juzhe.zhong
2023-06-02 8:56 ` Richard Biener [this message]
2023-06-02 8:58 ` juzhe.zhong
2023-06-02 11:43 ` Richard Sandiford
2023-06-02 11:50 ` Li, Pan2
2023-06-06 8:02 ` juzhe.zhong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=nycvar.YFH.7.77.849.2306020856100.4723@jbgna.fhfr.qr \
--to=rguenther@suse.de \
--cc=gcc-patches@gcc.gnu.org \
--cc=juzhe.zhong@rivai.ai \
--cc=linkw@linux.ibm.com \
--cc=richard.sandiford@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).