> 
> 
> Then:
> 
> On 2023-10-25T13:06:46+0200, Arthur Cohen <arthur.cohen@embecosm.com> wrote:
>> From: Pierre-Emmanuel Patry <pierre-emmanuel.patry@embecosm.com>
>> 
>> Add some dummy files in libproc_macro along with its build system.
> 
> I've not reviewed the build system in detail, just had a very quick look.
> 
> Three instances of 'librust'; should be 'libgrust':
> 
>    configure.ac:AC_INIT([libgrust], version-unused,,librust)
> 
>    configure.ac:AC_MSG_NOTICE([librust has been configured.])
> 
>    Makefile.am:        "TARGET_LIB_PATH_librust=$(TARGET_LIB_PATH_librust)" \
> 
> Compared to libgomp (which I'm reasonably familiar with), I found missing
> in 'libgrust' at 'configure'-level:
> 
>      --enable-multilib       build many library versions (default)
> 
>      --disable-werror        disable building with -Werror
> 
>      --enable-symvers=STYLE  enables symbol versioning of the shared library
>                              [default=yes]
> 
>      --enable-cet            enable Intel CET in target libraries [default=auto]
> 
>      --with-gcc-major-version-only
>                              use only GCC major number in filesystem paths
> 
> I can't tell off-hand whether all these are important, however.
> 
> Additionally, the new one that's being discussed in
> <https://github.com/Rust-GCC/gccrs/issues/2714>
> 'Update libgrust for upstream GCC commit 6a6d3817afa02bbcd2388c8e005da6faf88932f1 "Config,Darwin: Allow for configuring Darwin to use embedded runpath"'.
> 
> 
> Grüße
> Thomas
> 
> 
>> libgrust/Changelog:
>> 
>>      * Makefile.am: New file.
>>      * configure.ac: New file.
>>      * libproc_macro/Makefile.am: New file.
>>      * libproc_macro/proc_macro.cc: New file.
>>      * libproc_macro/proc_macro.h: New file.
>> 
>> Signed-off-by: Pierre-Emmanuel Patry <pierre-emmanuel.patry@embecosm.com>
>> ---
>> libgrust/Makefile.am                 |  68 ++++++++++++++++
>> libgrust/configure.ac                | 113 +++++++++++++++++++++++++++
>> libgrust/libproc_macro/Makefile.am   |  58 ++++++++++++++
>> libgrust/libproc_macro/proc_macro.cc |   7 ++
>> libgrust/libproc_macro/proc_macro.h  |   7 ++
>> 5 files changed, 253 insertions(+)
>> create mode 100644 libgrust/Makefile.am
>> create mode 100644 libgrust/configure.ac
>> create mode 100644 libgrust/libproc_macro/Makefile.am
>> create mode 100644 libgrust/libproc_macro/proc_macro.cc
>> create mode 100644 libgrust/libproc_macro/proc_macro.h
>> 
>> diff --git a/libgrust/Makefile.am b/libgrust/Makefile.am
>> new file mode 100644
>> index 00000000000..8e5274922c5
>> --- /dev/null
>> +++ b/libgrust/Makefile.am
>> @@ -0,0 +1,68 @@
>> +AUTOMAKE_OPTIONS = 1.8 foreign
>> +
>> +SUFFIXES = .c .rs .def .o .lo .a
>> +
>> +ACLOCAL_AMFLAGS = -I . -I .. -I ../config
>> +
>> +AM_CFLAGS = -I $(srcdir)/../libgcc -I $(MULTIBUILDTOP)../../gcc/include
>> +
>> +TOP_GCCDIR := $(shell cd $(top_srcdir) && cd .. && pwd)
>> +
>> +GCC_DIR = $(TOP_GCCDIR)/gcc
>> +RUST_SRC = $(GCC_DIR)/rust
>> +
>> +toolexeclibdir=@toolexeclibdir@
>> +toolexecdir=@toolexecdir@
>> +
>> +SUBDIRS = libproc_macro
>> +
>> +RUST_BUILDDIR := $(shell pwd)
>> +
>> +# Work around what appears to be a GNU make bug handling MAKEFLAGS
>> +# values defined in terms of make variables, as is the case for CC and
>> +# friends when we are called from the top level Makefile.
>> +AM_MAKEFLAGS = \
>> +        "GCC_DIR=$(GCC_DIR)" \
>> +        "RUST_SRC=$(RUST_SRC)" \
>> +     "AR_FLAGS=$(AR_FLAGS)" \
>> +     "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
>> +     "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
>> +     "RUST_FOR_TARGET=$(RUST_FOR_TARGET)" \
>> +     "CFLAGS=$(CFLAGS)" \
>> +     "CXXFLAGS=$(CXXFLAGS)" \
>> +     "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
>> +     "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
>> +     "INSTALL=$(INSTALL)" \
>> +     "INSTALL_DATA=$(INSTALL_DATA)" \
>> +     "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
>> +     "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
>> +     "LDFLAGS=$(LDFLAGS)" \
>> +     "LIBCFLAGS=$(LIBCFLAGS)" \
>> +     "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
>> +     "MAKE=$(MAKE)" \
>> +     "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
>> +     "PICFLAG=$(PICFLAG)" \
>> +     "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
>> +     "SHELL=$(SHELL)" \
>> +     "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
>> +     "exec_prefix=$(exec_prefix)" \
>> +     "infodir=$(infodir)" \
>> +     "libdir=$(libdir)" \
>> +     "includedir=$(includedir)" \
>> +     "prefix=$(prefix)" \
>> +     "tooldir=$(tooldir)" \
>> +     "gxx_include_dir=$(gxx_include_dir)" \
>> +     "AR=$(AR)" \
>> +     "AS=$(AS)" \
>> +     "LD=$(LD)" \
>> +     "RANLIB=$(RANLIB)" \
>> +     "NM=$(NM)" \
>> +     "NM_FOR_BUILD=$(NM_FOR_BUILD)" \
>> +     "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
>> +     "DESTDIR=$(DESTDIR)" \
>> +     "WERROR=$(WERROR)" \
>> +        "TARGET_LIB_PATH=$(TARGET_LIB_PATH)" \
>> +        "TARGET_LIB_PATH_librust=$(TARGET_LIB_PATH_librust)" \
>> +     "LIBTOOL=$(RUST_BUILDDIR)/libtool"
>> +
>> +include $(top_srcdir)/../multilib.am
>> diff --git a/libgrust/configure.ac b/libgrust/configure.ac
>> new file mode 100644
>> index 00000000000..7aed489a643
>> --- /dev/null
>> +++ b/libgrust/configure.ac
>> @@ -0,0 +1,113 @@
>> +AC_INIT([libgrust], version-unused,,librust)
>> +AC_CONFIG_SRCDIR(Makefile.am)
>> +AC_CONFIG_FILES([Makefile])
>> +
>> +# AM_ENABLE_MULTILIB(, ..)
>> +
>> +# Do not delete or change the following two lines.  For why, see
>> +# http://gcc.gnu.org/ml/libstdc++/2003-07/msg00451.html
>> +AC_CANONICAL_SYSTEM
>> +target_alias=${target_alias-$host_alias}
>> +AC_SUBST(target_alias)
>> +
>> +# Automake should never attempt to rebuild configure
>> +AM_MAINTAINER_MODE
>> +
>> +AM_INIT_AUTOMAKE([1.15.1 foreign no-dist -Wall])
>> +
>> +# Make sure we don't test executables when making cross-tools.
>> +GCC_NO_EXECUTABLES
>> +
>> +
>> +# Add the ability to change LIBTOOL directory
>> +GCC_WITH_TOOLEXECLIBDIR
>> +
>> +# Use system specific extensions
>> +AC_USE_SYSTEM_EXTENSIONS
>> +
>> +
>> +# Checks for header files.
>> +AC_HEADER_STDC
>> +AC_HEADER_SYS_WAIT
>> +AC_CHECK_HEADERS(limits.h stddef.h string.h strings.h stdlib.h \
>> +                 time.h sys/stat.h wchar.h)
>> +
>> +# Check for tools
>> +AM_PROG_AR
>> +AC_PROG_CC
>> +AC_PROG_CXX
>> +AM_PROG_AS
>> +AC_PROG_MAKE_SET
>> +AC_PROG_INSTALL
>> +
>> +# Enable libtool
>> +LT_INIT
>> +
>> +# target_noncanonical variables...
>> +AC_CANONICAL_HOST
>> +ACX_NONCANONICAL_HOST
>> +ACX_NONCANONICAL_TARGET
>> +GCC_TOPLEV_SUBDIRS
>> +
>> +AC_MSG_CHECKING([for --enable-version-specific-runtime-libs])
>> +AC_ARG_ENABLE(version-specific-runtime-libs,
>> +[  --enable-version-specific-runtime-libs    Specify that runtime libraries should be installed in a compiler-specific directory ],
>> +[case "$enableval" in
>> + yes) version_specific_libs=yes ;;
>> + no)  version_specific_libs=no ;;
>> + *)   AC_MSG_ERROR([Unknown argument to enable/disable version-specific libs]);;
>> + esac],
>> +[version_specific_libs=no])
>> +AC_MSG_RESULT($version_specific_libs)
>> +
>> +toolexecdir=no
>> +toolexeclibdir=no
>> +
>> +# Calculate toolexeclibdir
>> +# Also toolexecdir, though it's only used in toolexeclibdir
>> +case ${version_specific_libs} in
>> +  yes)
>> +    # Need the gcc compiler version to know where to install libraries
>> +    # and header files if --enable-version-specific-runtime-libs option
>> +    # is selected.
>> +    toolexecdir='$(libdir)/gcc/$(target_noncanonical)'
>> +    toolexeclibdir='$(toolexecdir)/$(gcc_version)$(MULTISUBDIR)'
>> +    ;;
>> +  no)
>> +    if test -n "$with_cross_host" &&
>> +       test x"$with_cross_host" != x"no"; then
>> +      # Install a library built with a cross compiler in tooldir, not libdir.
>> +      toolexecdir='$(exec_prefix)/$(target_noncanonical)'
>> +      toolexeclibdir='$(toolexecdir)/lib'
>> +    else
>> +      toolexecdir='$(libdir)/gcc-lib/$(target_noncanonical)'
>> +      toolexeclibdir='$(libdir)'
>> +    fi
>> +    multi_os_directory=`$CC -print-multi-os-directory`
>> +    case $multi_os_directory in
>> +      .) ;; # Avoid trailing /.
>> +      *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
>> +    esac
>> +    ;;
>> +esac
>> +
>> +AC_SUBST(toolexecdir)
>> +AC_SUBST(toolexeclibdir)
>> +
>> +
>> +AC_CONFIG_FILES(AC_FOREACH([DIR], [libproc_macro], [DIR/Makefile ]),
>> + [ cat > vpsed$$ << \_EOF
>> +s!`test -f '$<' || echo '$(srcdir)/'`!!
>> +_EOF
>> +   sed -f vpsed$$ $ac_file > tmp$$
>> +   mv tmp$$ $ac_file
>> +   rm vpsed$$
>> +   echo 'MULTISUBDIR =' >> $ac_file
>> +   ml_norecursion=yes
>> +   AS_UNSET([ml_norecursion])
>> +])
>> +
>> +
>> +AC_MSG_NOTICE([librust has been configured.])
>> +
>> +AC_OUTPUT
>> diff --git a/libgrust/libproc_macro/Makefile.am b/libgrust/libproc_macro/Makefile.am
>> new file mode 100644
>> index 00000000000..1e61d12e506
>> --- /dev/null
>> +++ b/libgrust/libproc_macro/Makefile.am
>> @@ -0,0 +1,58 @@
>> +SUFFIXES = .cc .o .a .lo .la
>> +
>> +ACLOCAL_AMFLAGS = -I .. -I ../../config
>> +
>> +toolexeclibdir=@toolexeclibdir@
>> +toolexecdir=@toolexecdir@
>> +
>> +# Work around what appears to be a GNU make bug handling MAKEFLAGS
>> +# values defined in terms of make variables, as is the case for CC and
>> +# friends when we are called from the top level Makefile.
>> +AM_MAKEFLAGS = \
>> +     "AR_FLAGS=$(AR_FLAGS)" \
>> +     "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
>> +     "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
>> +     "CFLAGS=$(CFLAGS)" \
>> +     "CXXFLAGS=$(CXXFLAGS)" \
>> +     "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
>> +     "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
>> +     "INSTALL=$(INSTALL)" \
>> +     "INSTALL_DATA=$(INSTALL_DATA)" \
>> +     "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
>> +     "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
>> +     "LDFLAGS=$(LDFLAGS)" \
>> +     "LIBCFLAGS=$(LIBCFLAGS)" \
>> +     "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
>> +     "MAKE=$(MAKE)" \
>> +     "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
>> +     "PICFLAG=$(PICFLAG)" \
>> +     "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
>> +     "SHELL=$(SHELL)" \
>> +     "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
>> +     "exec_prefix=$(exec_prefix)" \
>> +     "infodir=$(infodir)" \
>> +     "libdir=$(libdir)" \
>> +     "includedir=$(includedir)" \
>> +     "prefix=$(prefix)" \
>> +     "tooldir=$(tooldir)" \
>> +     "gxx_include_dir=$(gxx_include_dir)" \
>> +     "AR=$(AR)" \
>> +     "AS=$(AS)" \
>> +     "LD=$(LD)" \
>> +     "RANLIB=$(RANLIB)" \
>> +     "NM=$(NM)" \
>> +     "NM_FOR_BUILD=$(NM_FOR_BUILD)" \
>> +     "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
>> +     "DESTDIR=$(DESTDIR)" \
>> +     "WERROR=$(WERROR)" \
>> +        "TARGET_LIB_PATH=$(TARGET_LIB_PATH)" \
>> +        "TARGET_LIB_PATH_libgm2=$(TARGET_LIB_PATH_libgm2)"
>> +
>> +toolexeclib_LTLIBRARIES = libproc_macro.la
>> +
>> +libproc_macro_la_SOURCES = \
>> +     proc_macro.cc
>> +
>> +include_HEADERS = \
>> +     proc_macro.h
>> +
>> diff --git a/libgrust/libproc_macro/proc_macro.cc b/libgrust/libproc_macro/proc_macro.cc
>> new file mode 100644
>> index 00000000000..d13276294aa
>> --- /dev/null
>> +++ b/libgrust/libproc_macro/proc_macro.cc
>> @@ -0,0 +1,7 @@
>> +#include "proc_macro.h"
>> +
>> +int
>> +test ()
>> +{
>> +  return 0;
>> +}
>> diff --git a/libgrust/libproc_macro/proc_macro.h b/libgrust/libproc_macro/proc_macro.h
>> new file mode 100644
>> index 00000000000..2c96b3de685
>> --- /dev/null
>> +++ b/libgrust/libproc_macro/proc_macro.h
>> @@ -0,0 +1,7 @@
>> +#ifndef PROC_MACRO_H
>> +#define PROC_MACRO_H
>> +
>> +int
>> +test ();
>> +
>> +#endif /* ! PROC_MACRO_H */
>> --
>> 2.42.0
> -----------------
> Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 201, 80634 München; Gesellschaft mit beschränkter Haftung; Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der Gesellschaft: München; Registergericht München, HRB 106955