From: builder@sourceware.org
To: gcc-rust@gcc.gnu.org
Subject: ☠ Buildbot (GNU Toolchain): gccrust - failed 'grep unexpected ...' (failure) (master)
Date: Tue, 27 Sep 2022 06:49:33 +0000 [thread overview]
Message-ID: <20220927064933.CD4123858C2D@sourceware.org> (raw)
A new failure has been detected on builder gccrust-fedora-x86_64 while building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/16/builds/394
Build state: failed 'grep unexpected ...' (failure)
Revision: a16c35340c833ed25035c664ee33551d17309601
Worker: bb1-1
Build Reason: (unknown)
Blamelist: Aldy Hernandez <aldyh@redhat.com>, Alexander Monakov <amonakov@ispras.ru>, Andreas Krebbel <krebbel@linux.ibm.com>, Andrew MacLeod <amacleod@redhat.com>, Andrew Pinski <apinski@marvell.com>, Andrew Stubbs <ams@codesourcery.com>, Arnaud Charlet <charlet@adacore.com>, Arsen Arsenović <arsen@aarsen.me>, Bob Duff <duff@adacore.com>, Chenghua Xu <xuchenghua@loongson.cn>, Christophe Lyon <christophe.lyon@arm.com>, Chung-Lin Tang <cltang@codesourcery.com>, Claire Dross <dross@adacore.com>, David Faust <david.faust@oracle.com>, David Malcolm <dmalcolm@redhat.com>, Eric Botcazou <ebotcazou@adacore.com>, Eugene Rozenfeld <erozen@microsoft.com>, Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>, Francois-Xavier Coudert <fxcoudert@gmail.com>, François Dumont <fdumont@gcc.gnu.org>, GCC Administrator <gccadmin@gcc.gnu.org>, Gary Dismukes <dismukes@adacore.com>, Georg-Johann Lay <avr@gjlay.de>, H.J. Lu <hjl.tools@gmail.com>, Harald Anlauf <anlauf@gmx.de>, Hu, Lin1 <lin1.hu@intel.com>, Iain Buclaw <ibuclaw@gdcproject.org>, Iain Sandoe <iain@sandoe.co.uk>, Ian Lance Taylor <iant@golang.org>, Jakub Jelinek <jakub@redhat.com>, Jan-Benedict Glaw <jbglaw@lug-owl.de>, Jason Merrill <jason@redhat.com>, Javier Miranda <miranda@adacore.com>, Jeff Law <jeffreyalaw@gmail.com>, Jiufu Guo <guojiufu@linux.ibm.com>, Joffrey Huguet <huguet@adacore.com>, Jonathan Wakely <jwakely@redhat.com>, Jose E. Marchesi <jose.marchesi@oracle.com>, Joseph Myers <joseph@codesourcery.com>, José Rui Faustino de Sousa <jrfsousa@gmail.com>, Julian Brown <julian@codesourcery.com>, Julien Bortolussi <bortolussi@adacore.com>, Justin Squirek <squirek@adacore.com>, Kewen Lin <linkw@linux.ibm.com>, Kewen.Lin <linkw@gcc.gnu.org>, Kito Cheng <kito.cheng@sifive.com>, Kwok Cheung Yeung <kcy@codesourcery.com>, Kyrylo Tkachov <kyrylo.tkachov@arm.com>, Lewis Hyatt <lhyatt@gmail.com>, LiaoShihua <shihua@iscas.ac.cn>, Lulu Cheng <chenglulu@loongson.cn>, Marc Poulhiès <poulhies@adacore.com>, Marcel Vollweiler <marcel@codesourcery.com>, Marek Polacek <polacek@redhat.com>, Martin Jambor <mjambor@suse.cz>, Martin Liska <mliska@suse.cz>, Max Filippov <jcmvbkbc@gmail.com>, Palmer Dabbelt <palmer@rivosinc.com>, Patrick Bernardi <bernardi@adacore.com>, Patrick Palka <ppalka@redhat.com>, Paul-Antoine Arras <pa@codesourcery.com>, Peter Bergner <bergner@linux.ibm.com>, Philipp Fent <fent@in.tum.de>, Piotr Trojanek <trojanek@adacore.com>, Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>, Richard Biener <rguenther@suse.de>, Richard Sandiford <richard.sandiford@arm.com>, Robin Dapp <rdapp@linux.ibm.com>, Roger Sayle <roger@nextmovesoftware.com>, Sebastian Huber <sebastian.huber@embedded-brains.de>, Segher Boessenkool <segher@kernel.crashing.org>, Simon Rainer <gcc.gnu@vvalter.com>, Steve Baird <baird@adacore.com>, Surya Kumari Jangala <jskumari@linux.ibm.com>, Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>, Tamar Christina <tamar.christina@arm.com>, Thomas Neumann <tneumann@users.sourceforge.net>, Thomas Rodgers <trodgers@redhat.com>, Tim Lange <mail@tim-lange.me>, Tobias Burnus <tobias@codesourcery.com>, Tom de Vries <tdevries@suse.de>, Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>, Ulrich Drepper <drepper@gmail.com>, Uros Bizjak <ubizjak@gmail.com>, Vineet Gupta <vineetg@rivosinc.com>, Will Hawkins <whh8b@obs.cr>, Xi Ruoyao <xry111@xry111.site>, Xianmiao Qu <cooper.qu@linux.alibaba.com>, Yannick Moy <moy@adacore.com>, bors[bot] <26634292+bors[bot]@users.noreply.github.com>, konglin1 <lingling.kong@intel.com>, liuhongt <hongtao.liu@intel.com>, liushuyu <liushuyu011@gmail.com>, zhongjuzhe <juzhe.zhong@rivai.ai>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/4/logs/stdio
- warnings (25): https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/4/logs/warnings__25_
- 5: make check ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/5/logs/stdio
- rust.sum: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/5/logs/rust_sum
- rust.log: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/5/logs/rust_log
- warnings (6): https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/5/logs/warnings__6_
- 6: grep unexpected rust.sum ( failure )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/16/builds/394/steps/17/logs/stdio
A new failure has been detected on builder gccrust-fedora-ppc64le while building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/19/builds/380
Build state: failed 'grep unexpected ...' (failure)
Revision: a16c35340c833ed25035c664ee33551d17309601
Worker: fedora-ppc64le
Build Reason: (unknown)
Blamelist: Aldy Hernandez <aldyh@redhat.com>, Alexander Monakov <amonakov@ispras.ru>, Andreas Krebbel <krebbel@linux.ibm.com>, Andrew MacLeod <amacleod@redhat.com>, Andrew Pinski <apinski@marvell.com>, Andrew Stubbs <ams@codesourcery.com>, Arnaud Charlet <charlet@adacore.com>, Arsen Arsenović <arsen@aarsen.me>, Bob Duff <duff@adacore.com>, Chenghua Xu <xuchenghua@loongson.cn>, Christophe Lyon <christophe.lyon@arm.com>, Chung-Lin Tang <cltang@codesourcery.com>, Claire Dross <dross@adacore.com>, David Faust <david.faust@oracle.com>, David Malcolm <dmalcolm@redhat.com>, Eric Botcazou <ebotcazou@adacore.com>, Eugene Rozenfeld <erozen@microsoft.com>, Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>, Francois-Xavier Coudert <fxcoudert@gmail.com>, François Dumont <fdumont@gcc.gnu.org>, GCC Administrator <gccadmin@gcc.gnu.org>, Gary Dismukes <dismukes@adacore.com>, Georg-Johann Lay <avr@gjlay.de>, H.J. Lu <hjl.tools@gmail.com>, Harald Anlauf <anlauf@gmx.de>, Hu, Lin1 <lin1.hu@intel.com>, Iain Buclaw <ibuclaw@gdcproject.org>, Iain Sandoe <iain@sandoe.co.uk>, Ian Lance Taylor <iant@golang.org>, Jakub Jelinek <jakub@redhat.com>, Jan-Benedict Glaw <jbglaw@lug-owl.de>, Jason Merrill <jason@redhat.com>, Javier Miranda <miranda@adacore.com>, Jeff Law <jeffreyalaw@gmail.com>, Jiufu Guo <guojiufu@linux.ibm.com>, Joffrey Huguet <huguet@adacore.com>, Jonathan Wakely <jwakely@redhat.com>, Jose E. Marchesi <jose.marchesi@oracle.com>, Joseph Myers <joseph@codesourcery.com>, José Rui Faustino de Sousa <jrfsousa@gmail.com>, Julian Brown <julian@codesourcery.com>, Julien Bortolussi <bortolussi@adacore.com>, Justin Squirek <squirek@adacore.com>, Kewen Lin <linkw@linux.ibm.com>, Kewen.Lin <linkw@gcc.gnu.org>, Kito Cheng <kito.cheng@sifive.com>, Kwok Cheung Yeung <kcy@codesourcery.com>, Kyrylo Tkachov <kyrylo.tkachov@arm.com>, Lewis Hyatt <lhyatt@gmail.com>, LiaoShihua <shihua@iscas.ac.cn>, Lulu Cheng <chenglulu@loongson.cn>, Marc Poulhiès <poulhies@adacore.com>, Marcel Vollweiler <marcel@codesourcery.com>, Marek Polacek <polacek@redhat.com>, Martin Jambor <mjambor@suse.cz>, Martin Liska <mliska@suse.cz>, Max Filippov <jcmvbkbc@gmail.com>, Palmer Dabbelt <palmer@rivosinc.com>, Patrick Bernardi <bernardi@adacore.com>, Patrick Palka <ppalka@redhat.com>, Paul-Antoine Arras <pa@codesourcery.com>, Peter Bergner <bergner@linux.ibm.com>, Philipp Fent <fent@in.tum.de>, Piotr Trojanek <trojanek@adacore.com>, Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>, Richard Biener <rguenther@suse.de>, Richard Sandiford <richard.sandiford@arm.com>, Robin Dapp <rdapp@linux.ibm.com>, Roger Sayle <roger@nextmovesoftware.com>, Sebastian Huber <sebastian.huber@embedded-brains.de>, Segher Boessenkool <segher@kernel.crashing.org>, Simon Rainer <gcc.gnu@vvalter.com>, Steve Baird <baird@adacore.com>, Surya Kumari Jangala <jskumari@linux.ibm.com>, Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>, Tamar Christina <tamar.christina@arm.com>, Thomas Neumann <tneumann@users.sourceforge.net>, Thomas Rodgers <trodgers@redhat.com>, Tim Lange <mail@tim-lange.me>, Tobias Burnus <tobias@codesourcery.com>, Tom de Vries <tdevries@suse.de>, Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>, Ulrich Drepper <drepper@gmail.com>, Uros Bizjak <ubizjak@gmail.com>, Vineet Gupta <vineetg@rivosinc.com>, Will Hawkins <whh8b@obs.cr>, Xi Ruoyao <xry111@xry111.site>, Xianmiao Qu <cooper.qu@linux.alibaba.com>, Yannick Moy <moy@adacore.com>, bors[bot] <26634292+bors[bot]@users.noreply.github.com>, konglin1 <lingling.kong@intel.com>, liuhongt <hongtao.liu@intel.com>, liushuyu <liushuyu011@gmail.com>, zhongjuzhe <juzhe.zhong@rivai.ai>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/4/logs/stdio
- warnings (29): https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/4/logs/warnings__29_
- 5: make check ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/5/logs/stdio
- rust.sum: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/5/logs/rust_sum
- rust.log: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/5/logs/rust_log
- warnings (4): https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/5/logs/warnings__4_
- 6: grep unexpected rust.sum ( failure )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/19/builds/380/steps/17/logs/stdio
A new failure has been detected on builder gccrust-debian-i386 while building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/27/builds/409
Build state: failed 'grep unexpected ...' (failure)
Revision: a16c35340c833ed25035c664ee33551d17309601
Worker: debian-i386-2
Build Reason: (unknown)
Blamelist: Aldy Hernandez <aldyh@redhat.com>, Alexander Monakov <amonakov@ispras.ru>, Andreas Krebbel <krebbel@linux.ibm.com>, Andrew MacLeod <amacleod@redhat.com>, Andrew Pinski <apinski@marvell.com>, Andrew Stubbs <ams@codesourcery.com>, Arnaud Charlet <charlet@adacore.com>, Arsen Arsenović <arsen@aarsen.me>, Bob Duff <duff@adacore.com>, Chenghua Xu <xuchenghua@loongson.cn>, Christophe Lyon <christophe.lyon@arm.com>, Chung-Lin Tang <cltang@codesourcery.com>, Claire Dross <dross@adacore.com>, David Faust <david.faust@oracle.com>, David Malcolm <dmalcolm@redhat.com>, Eric Botcazou <ebotcazou@adacore.com>, Eugene Rozenfeld <erozen@microsoft.com>, Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>, Francois-Xavier Coudert <fxcoudert@gmail.com>, François Dumont <fdumont@gcc.gnu.org>, GCC Administrator <gccadmin@gcc.gnu.org>, Gary Dismukes <dismukes@adacore.com>, Georg-Johann Lay <avr@gjlay.de>, H.J. Lu <hjl.tools@gmail.com>, Harald Anlauf <anlauf@gmx.de>, Hu, Lin1 <lin1.hu@intel.com>, Iain Buclaw <ibuclaw@gdcproject.org>, Iain Sandoe <iain@sandoe.co.uk>, Ian Lance Taylor <iant@golang.org>, Jakub Jelinek <jakub@redhat.com>, Jan-Benedict Glaw <jbglaw@lug-owl.de>, Jason Merrill <jason@redhat.com>, Javier Miranda <miranda@adacore.com>, Jeff Law <jeffreyalaw@gmail.com>, Jiufu Guo <guojiufu@linux.ibm.com>, Joffrey Huguet <huguet@adacore.com>, Jonathan Wakely <jwakely@redhat.com>, Jose E. Marchesi <jose.marchesi@oracle.com>, Joseph Myers <joseph@codesourcery.com>, José Rui Faustino de Sousa <jrfsousa@gmail.com>, Julian Brown <julian@codesourcery.com>, Julien Bortolussi <bortolussi@adacore.com>, Justin Squirek <squirek@adacore.com>, Kewen Lin <linkw@linux.ibm.com>, Kewen.Lin <linkw@gcc.gnu.org>, Kito Cheng <kito.cheng@sifive.com>, Kwok Cheung Yeung <kcy@codesourcery.com>, Kyrylo Tkachov <kyrylo.tkachov@arm.com>, Lewis Hyatt <lhyatt@gmail.com>, LiaoShihua <shihua@iscas.ac.cn>, Lulu Cheng <chenglulu@loongson.cn>, Marc Poulhiès <poulhies@adacore.com>, Marcel Vollweiler <marcel@codesourcery.com>, Marek Polacek <polacek@redhat.com>, Martin Jambor <mjambor@suse.cz>, Martin Liska <mliska@suse.cz>, Max Filippov <jcmvbkbc@gmail.com>, Palmer Dabbelt <palmer@rivosinc.com>, Patrick Bernardi <bernardi@adacore.com>, Patrick Palka <ppalka@redhat.com>, Paul-Antoine Arras <pa@codesourcery.com>, Peter Bergner <bergner@linux.ibm.com>, Philipp Fent <fent@in.tum.de>, Piotr Trojanek <trojanek@adacore.com>, Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>, Richard Biener <rguenther@suse.de>, Richard Sandiford <richard.sandiford@arm.com>, Robin Dapp <rdapp@linux.ibm.com>, Roger Sayle <roger@nextmovesoftware.com>, Sebastian Huber <sebastian.huber@embedded-brains.de>, Segher Boessenkool <segher@kernel.crashing.org>, Simon Rainer <gcc.gnu@vvalter.com>, Steve Baird <baird@adacore.com>, Surya Kumari Jangala <jskumari@linux.ibm.com>, Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>, Tamar Christina <tamar.christina@arm.com>, Thomas Neumann <tneumann@users.sourceforge.net>, Thomas Rodgers <trodgers@redhat.com>, Tim Lange <mail@tim-lange.me>, Tobias Burnus <tobias@codesourcery.com>, Tom de Vries <tdevries@suse.de>, Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>, Ulrich Drepper <drepper@gmail.com>, Uros Bizjak <ubizjak@gmail.com>, Vineet Gupta <vineetg@rivosinc.com>, Will Hawkins <whh8b@obs.cr>, Xi Ruoyao <xry111@xry111.site>, Xianmiao Qu <cooper.qu@linux.alibaba.com>, Yannick Moy <moy@adacore.com>, bors[bot] <26634292+bors[bot]@users.noreply.github.com>, konglin1 <lingling.kong@intel.com>, liuhongt <hongtao.liu@intel.com>, liushuyu <liushuyu011@gmail.com>, zhongjuzhe <juzhe.zhong@rivai.ai>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/4/logs/stdio
- warnings (21): https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/4/logs/warnings__21_
- 5: make check ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/5/logs/stdio
- rust.sum: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/5/logs/rust_sum
- rust.log: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/5/logs/rust_log
- 6: grep unexpected rust.sum ( failure )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/27/builds/409/steps/17/logs/stdio
A new failure has been detected on builder gccrust-opensusetw-x86_64 while building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/103/builds/246
Build state: failed 'grep unexpected ...' (failure)
Revision: a16c35340c833ed25035c664ee33551d17309601
Worker: bb1-2
Build Reason: (unknown)
Blamelist: Aldy Hernandez <aldyh@redhat.com>, Alexander Monakov <amonakov@ispras.ru>, Andreas Krebbel <krebbel@linux.ibm.com>, Andrew MacLeod <amacleod@redhat.com>, Andrew Pinski <apinski@marvell.com>, Andrew Stubbs <ams@codesourcery.com>, Arnaud Charlet <charlet@adacore.com>, Arsen Arsenović <arsen@aarsen.me>, Bob Duff <duff@adacore.com>, Chenghua Xu <xuchenghua@loongson.cn>, Christophe Lyon <christophe.lyon@arm.com>, Chung-Lin Tang <cltang@codesourcery.com>, Claire Dross <dross@adacore.com>, David Faust <david.faust@oracle.com>, David Malcolm <dmalcolm@redhat.com>, Eric Botcazou <ebotcazou@adacore.com>, Eugene Rozenfeld <erozen@microsoft.com>, Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>, Francois-Xavier Coudert <fxcoudert@gmail.com>, François Dumont <fdumont@gcc.gnu.org>, GCC Administrator <gccadmin@gcc.gnu.org>, Gary Dismukes <dismukes@adacore.com>, Georg-Johann Lay <avr@gjlay.de>, H.J. Lu <hjl.tools@gmail.com>, Harald Anlauf <anlauf@gmx.de>, Hu, Lin1 <lin1.hu@intel.com>, Iain Buclaw <ibuclaw@gdcproject.org>, Iain Sandoe <iain@sandoe.co.uk>, Ian Lance Taylor <iant@golang.org>, Jakub Jelinek <jakub@redhat.com>, Jan-Benedict Glaw <jbglaw@lug-owl.de>, Jason Merrill <jason@redhat.com>, Javier Miranda <miranda@adacore.com>, Jeff Law <jeffreyalaw@gmail.com>, Jiufu Guo <guojiufu@linux.ibm.com>, Joffrey Huguet <huguet@adacore.com>, Jonathan Wakely <jwakely@redhat.com>, Jose E. Marchesi <jose.marchesi@oracle.com>, Joseph Myers <joseph@codesourcery.com>, José Rui Faustino de Sousa <jrfsousa@gmail.com>, Julian Brown <julian@codesourcery.com>, Julien Bortolussi <bortolussi@adacore.com>, Justin Squirek <squirek@adacore.com>, Kewen Lin <linkw@linux.ibm.com>, Kewen.Lin <linkw@gcc.gnu.org>, Kito Cheng <kito.cheng@sifive.com>, Kwok Cheung Yeung <kcy@codesourcery.com>, Kyrylo Tkachov <kyrylo.tkachov@arm.com>, Lewis Hyatt <lhyatt@gmail.com>, LiaoShihua <shihua@iscas.ac.cn>, Lulu Cheng <chenglulu@loongson.cn>, Marc Poulhiès <poulhies@adacore.com>, Marcel Vollweiler <marcel@codesourcery.com>, Marek Polacek <polacek@redhat.com>, Martin Jambor <mjambor@suse.cz>, Martin Liska <mliska@suse.cz>, Max Filippov <jcmvbkbc@gmail.com>, Palmer Dabbelt <palmer@rivosinc.com>, Patrick Bernardi <bernardi@adacore.com>, Patrick Palka <ppalka@redhat.com>, Paul-Antoine Arras <pa@codesourcery.com>, Peter Bergner <bergner@linux.ibm.com>, Philipp Fent <fent@in.tum.de>, Piotr Trojanek <trojanek@adacore.com>, Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>, Richard Biener <rguenther@suse.de>, Richard Sandiford <richard.sandiford@arm.com>, Robin Dapp <rdapp@linux.ibm.com>, Roger Sayle <roger@nextmovesoftware.com>, Sebastian Huber <sebastian.huber@embedded-brains.de>, Segher Boessenkool <segher@kernel.crashing.org>, Simon Rainer <gcc.gnu@vvalter.com>, Steve Baird <baird@adacore.com>, Surya Kumari Jangala <jskumari@linux.ibm.com>, Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>, Tamar Christina <tamar.christina@arm.com>, Thomas Neumann <tneumann@users.sourceforge.net>, Thomas Rodgers <trodgers@redhat.com>, Tim Lange <mail@tim-lange.me>, Tobias Burnus <tobias@codesourcery.com>, Tom de Vries <tdevries@suse.de>, Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>, Ulrich Drepper <drepper@gmail.com>, Uros Bizjak <ubizjak@gmail.com>, Vineet Gupta <vineetg@rivosinc.com>, Will Hawkins <whh8b@obs.cr>, Xi Ruoyao <xry111@xry111.site>, Xianmiao Qu <cooper.qu@linux.alibaba.com>, Yannick Moy <moy@adacore.com>, bors[bot] <26634292+bors[bot]@users.noreply.github.com>, konglin1 <lingling.kong@intel.com>, liuhongt <hongtao.liu@intel.com>, liushuyu <liushuyu011@gmail.com>, zhongjuzhe <juzhe.zhong@rivai.ai>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/4/logs/stdio
- warnings (34): https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/4/logs/warnings__34_
- 5: make check ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/5/logs/stdio
- rust.sum: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/5/logs/rust_sum
- rust.log: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/5/logs/rust_log
- 6: grep unexpected rust.sum ( failure )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/103/builds/246/steps/17/logs/stdio
A new failure has been detected on builder gccrust-opensuseleap-x86_64 while building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/104/builds/248
Build state: failed 'grep unexpected ...' (failure)
Revision: a16c35340c833ed25035c664ee33551d17309601
Worker: bbo1-1
Build Reason: (unknown)
Blamelist: Aldy Hernandez <aldyh@redhat.com>, Alexander Monakov <amonakov@ispras.ru>, Andreas Krebbel <krebbel@linux.ibm.com>, Andrew MacLeod <amacleod@redhat.com>, Andrew Pinski <apinski@marvell.com>, Andrew Stubbs <ams@codesourcery.com>, Arnaud Charlet <charlet@adacore.com>, Arsen Arsenović <arsen@aarsen.me>, Bob Duff <duff@adacore.com>, Chenghua Xu <xuchenghua@loongson.cn>, Christophe Lyon <christophe.lyon@arm.com>, Chung-Lin Tang <cltang@codesourcery.com>, Claire Dross <dross@adacore.com>, David Faust <david.faust@oracle.com>, David Malcolm <dmalcolm@redhat.com>, Eric Botcazou <ebotcazou@adacore.com>, Eugene Rozenfeld <erozen@microsoft.com>, Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>, Francois-Xavier Coudert <fxcoudert@gmail.com>, François Dumont <fdumont@gcc.gnu.org>, GCC Administrator <gccadmin@gcc.gnu.org>, Gary Dismukes <dismukes@adacore.com>, Georg-Johann Lay <avr@gjlay.de>, H.J. Lu <hjl.tools@gmail.com>, Harald Anlauf <anlauf@gmx.de>, Hu, Lin1 <lin1.hu@intel.com>, Iain Buclaw <ibuclaw@gdcproject.org>, Iain Sandoe <iain@sandoe.co.uk>, Ian Lance Taylor <iant@golang.org>, Jakub Jelinek <jakub@redhat.com>, Jan-Benedict Glaw <jbglaw@lug-owl.de>, Jason Merrill <jason@redhat.com>, Javier Miranda <miranda@adacore.com>, Jeff Law <jeffreyalaw@gmail.com>, Jiufu Guo <guojiufu@linux.ibm.com>, Joffrey Huguet <huguet@adacore.com>, Jonathan Wakely <jwakely@redhat.com>, Jose E. Marchesi <jose.marchesi@oracle.com>, Joseph Myers <joseph@codesourcery.com>, José Rui Faustino de Sousa <jrfsousa@gmail.com>, Julian Brown <julian@codesourcery.com>, Julien Bortolussi <bortolussi@adacore.com>, Justin Squirek <squirek@adacore.com>, Kewen Lin <linkw@linux.ibm.com>, Kewen.Lin <linkw@gcc.gnu.org>, Kito Cheng <kito.cheng@sifive.com>, Kwok Cheung Yeung <kcy@codesourcery.com>, Kyrylo Tkachov <kyrylo.tkachov@arm.com>, Lewis Hyatt <lhyatt@gmail.com>, LiaoShihua <shihua@iscas.ac.cn>, Lulu Cheng <chenglulu@loongson.cn>, Marc Poulhiès <poulhies@adacore.com>, Marcel Vollweiler <marcel@codesourcery.com>, Marek Polacek <polacek@redhat.com>, Martin Jambor <mjambor@suse.cz>, Martin Liska <mliska@suse.cz>, Max Filippov <jcmvbkbc@gmail.com>, Palmer Dabbelt <palmer@rivosinc.com>, Patrick Bernardi <bernardi@adacore.com>, Patrick Palka <ppalka@redhat.com>, Paul-Antoine Arras <pa@codesourcery.com>, Peter Bergner <bergner@linux.ibm.com>, Philipp Fent <fent@in.tum.de>, Piotr Trojanek <trojanek@adacore.com>, Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>, Richard Biener <rguenther@suse.de>, Richard Sandiford <richard.sandiford@arm.com>, Robin Dapp <rdapp@linux.ibm.com>, Roger Sayle <roger@nextmovesoftware.com>, Sebastian Huber <sebastian.huber@embedded-brains.de>, Segher Boessenkool <segher@kernel.crashing.org>, Simon Rainer <gcc.gnu@vvalter.com>, Steve Baird <baird@adacore.com>, Surya Kumari Jangala <jskumari@linux.ibm.com>, Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>, Tamar Christina <tamar.christina@arm.com>, Thomas Neumann <tneumann@users.sourceforge.net>, Thomas Rodgers <trodgers@redhat.com>, Tim Lange <mail@tim-lange.me>, Tobias Burnus <tobias@codesourcery.com>, Tom de Vries <tdevries@suse.de>, Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>, Ulrich Drepper <drepper@gmail.com>, Uros Bizjak <ubizjak@gmail.com>, Vineet Gupta <vineetg@rivosinc.com>, Will Hawkins <whh8b@obs.cr>, Xi Ruoyao <xry111@xry111.site>, Xianmiao Qu <cooper.qu@linux.alibaba.com>, Yannick Moy <moy@adacore.com>, bors[bot] <26634292+bors[bot]@users.noreply.github.com>, konglin1 <lingling.kong@intel.com>, liuhongt <hongtao.liu@intel.com>, liushuyu <liushuyu011@gmail.com>, zhongjuzhe <juzhe.zhong@rivai.ai>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/4/logs/stdio
- warnings (102): https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/4/logs/warnings__102_
- 5: make check ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/5/logs/stdio
- rust.sum: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/5/logs/rust_sum
- rust.log: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/5/logs/rust_log
- 6: grep unexpected rust.sum ( failure )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/104/builds/248/steps/17/logs/stdio
A new failure has been detected on builder gccrust-rawhide-x86_64 while building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/132/builds/182
Build state: failed 'grep unexpected ...' (failure)
Revision: a16c35340c833ed25035c664ee33551d17309601
Worker: bb3
Build Reason: (unknown)
Blamelist: Aldy Hernandez <aldyh@redhat.com>, Alexander Monakov <amonakov@ispras.ru>, Andreas Krebbel <krebbel@linux.ibm.com>, Andrew MacLeod <amacleod@redhat.com>, Andrew Pinski <apinski@marvell.com>, Andrew Stubbs <ams@codesourcery.com>, Arnaud Charlet <charlet@adacore.com>, Arsen Arsenović <arsen@aarsen.me>, Bob Duff <duff@adacore.com>, Chenghua Xu <xuchenghua@loongson.cn>, Christophe Lyon <christophe.lyon@arm.com>, Chung-Lin Tang <cltang@codesourcery.com>, Claire Dross <dross@adacore.com>, David Faust <david.faust@oracle.com>, David Malcolm <dmalcolm@redhat.com>, Eric Botcazou <ebotcazou@adacore.com>, Eugene Rozenfeld <erozen@microsoft.com>, Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>, Francois-Xavier Coudert <fxcoudert@gmail.com>, François Dumont <fdumont@gcc.gnu.org>, GCC Administrator <gccadmin@gcc.gnu.org>, Gary Dismukes <dismukes@adacore.com>, Georg-Johann Lay <avr@gjlay.de>, H.J. Lu <hjl.tools@gmail.com>, Harald Anlauf <anlauf@gmx.de>, Hu, Lin1 <lin1.hu@intel.com>, Iain Buclaw <ibuclaw@gdcproject.org>, Iain Sandoe <iain@sandoe.co.uk>, Ian Lance Taylor <iant@golang.org>, Jakub Jelinek <jakub@redhat.com>, Jan-Benedict Glaw <jbglaw@lug-owl.de>, Jason Merrill <jason@redhat.com>, Javier Miranda <miranda@adacore.com>, Jeff Law <jeffreyalaw@gmail.com>, Jiufu Guo <guojiufu@linux.ibm.com>, Joffrey Huguet <huguet@adacore.com>, Jonathan Wakely <jwakely@redhat.com>, Jose E. Marchesi <jose.marchesi@oracle.com>, Joseph Myers <joseph@codesourcery.com>, José Rui Faustino de Sousa <jrfsousa@gmail.com>, Julian Brown <julian@codesourcery.com>, Julien Bortolussi <bortolussi@adacore.com>, Justin Squirek <squirek@adacore.com>, Kewen Lin <linkw@linux.ibm.com>, Kewen.Lin <linkw@gcc.gnu.org>, Kito Cheng <kito.cheng@sifive.com>, Kwok Cheung Yeung <kcy@codesourcery.com>, Kyrylo Tkachov <kyrylo.tkachov@arm.com>, Lewis Hyatt <lhyatt@gmail.com>, LiaoShihua <shihua@iscas.ac.cn>, Lulu Cheng <chenglulu@loongson.cn>, Marc Poulhiès <poulhies@adacore.com>, Marcel Vollweiler <marcel@codesourcery.com>, Marek Polacek <polacek@redhat.com>, Martin Jambor <mjambor@suse.cz>, Martin Liska <mliska@suse.cz>, Max Filippov <jcmvbkbc@gmail.com>, Palmer Dabbelt <palmer@rivosinc.com>, Patrick Bernardi <bernardi@adacore.com>, Patrick Palka <ppalka@redhat.com>, Paul-Antoine Arras <pa@codesourcery.com>, Peter Bergner <bergner@linux.ibm.com>, Philipp Fent <fent@in.tum.de>, Piotr Trojanek <trojanek@adacore.com>, Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>, Richard Biener <rguenther@suse.de>, Richard Sandiford <richard.sandiford@arm.com>, Robin Dapp <rdapp@linux.ibm.com>, Roger Sayle <roger@nextmovesoftware.com>, Sebastian Huber <sebastian.huber@embedded-brains.de>, Segher Boessenkool <segher@kernel.crashing.org>, Simon Rainer <gcc.gnu@vvalter.com>, Steve Baird <baird@adacore.com>, Surya Kumari Jangala <jskumari@linux.ibm.com>, Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>, Tamar Christina <tamar.christina@arm.com>, Thomas Neumann <tneumann@users.sourceforge.net>, Thomas Rodgers <trodgers@redhat.com>, Tim Lange <mail@tim-lange.me>, Tobias Burnus <tobias@codesourcery.com>, Tom de Vries <tdevries@suse.de>, Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>, Ulrich Drepper <drepper@gmail.com>, Uros Bizjak <ubizjak@gmail.com>, Vineet Gupta <vineetg@rivosinc.com>, Will Hawkins <whh8b@obs.cr>, Xi Ruoyao <xry111@xry111.site>, Xianmiao Qu <cooper.qu@linux.alibaba.com>, Yannick Moy <moy@adacore.com>, bors[bot] <26634292+bors[bot]@users.noreply.github.com>, konglin1 <lingling.kong@intel.com>, liuhongt <hongtao.liu@intel.com>, liushuyu <liushuyu011@gmail.com>, zhongjuzhe <juzhe.zhong@rivai.ai>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/4/logs/stdio
- warnings (35): https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/4/logs/warnings__35_
- 5: make check ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/5/logs/stdio
- rust.sum: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/5/logs/rust_sum
- rust.log: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/5/logs/rust_log
- warnings (6): https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/5/logs/warnings__6_
- 6: grep unexpected rust.sum ( failure )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/132/builds/182/steps/17/logs/stdio
A new failure has been detected on builder gccrust-debian-testing-x86_64 while building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/146/builds/177
Build state: failed 'grep unexpected ...' (failure)
Revision: a16c35340c833ed25035c664ee33551d17309601
Worker: bbo1-2
Build Reason: (unknown)
Blamelist: Aldy Hernandez <aldyh@redhat.com>, Alexander Monakov <amonakov@ispras.ru>, Andreas Krebbel <krebbel@linux.ibm.com>, Andrew MacLeod <amacleod@redhat.com>, Andrew Pinski <apinski@marvell.com>, Andrew Stubbs <ams@codesourcery.com>, Arnaud Charlet <charlet@adacore.com>, Arsen Arsenović <arsen@aarsen.me>, Bob Duff <duff@adacore.com>, Chenghua Xu <xuchenghua@loongson.cn>, Christophe Lyon <christophe.lyon@arm.com>, Chung-Lin Tang <cltang@codesourcery.com>, Claire Dross <dross@adacore.com>, David Faust <david.faust@oracle.com>, David Malcolm <dmalcolm@redhat.com>, Eric Botcazou <ebotcazou@adacore.com>, Eugene Rozenfeld <erozen@microsoft.com>, Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>, Francois-Xavier Coudert <fxcoudert@gmail.com>, François Dumont <fdumont@gcc.gnu.org>, GCC Administrator <gccadmin@gcc.gnu.org>, Gary Dismukes <dismukes@adacore.com>, Georg-Johann Lay <avr@gjlay.de>, H.J. Lu <hjl.tools@gmail.com>, Harald Anlauf <anlauf@gmx.de>, Hu, Lin1 <lin1.hu@intel.com>, Iain Buclaw <ibuclaw@gdcproject.org>, Iain Sandoe <iain@sandoe.co.uk>, Ian Lance Taylor <iant@golang.org>, Jakub Jelinek <jakub@redhat.com>, Jan-Benedict Glaw <jbglaw@lug-owl.de>, Jason Merrill <jason@redhat.com>, Javier Miranda <miranda@adacore.com>, Jeff Law <jeffreyalaw@gmail.com>, Jiufu Guo <guojiufu@linux.ibm.com>, Joffrey Huguet <huguet@adacore.com>, Jonathan Wakely <jwakely@redhat.com>, Jose E. Marchesi <jose.marchesi@oracle.com>, Joseph Myers <joseph@codesourcery.com>, José Rui Faustino de Sousa <jrfsousa@gmail.com>, Julian Brown <julian@codesourcery.com>, Julien Bortolussi <bortolussi@adacore.com>, Justin Squirek <squirek@adacore.com>, Kewen Lin <linkw@linux.ibm.com>, Kewen.Lin <linkw@gcc.gnu.org>, Kito Cheng <kito.cheng@sifive.com>, Kwok Cheung Yeung <kcy@codesourcery.com>, Kyrylo Tkachov <kyrylo.tkachov@arm.com>, Lewis Hyatt <lhyatt@gmail.com>, LiaoShihua <shihua@iscas.ac.cn>, Lulu Cheng <chenglulu@loongson.cn>, Marc Poulhiès <poulhies@adacore.com>, Marcel Vollweiler <marcel@codesourcery.com>, Marek Polacek <polacek@redhat.com>, Martin Jambor <mjambor@suse.cz>, Martin Liska <mliska@suse.cz>, Max Filippov <jcmvbkbc@gmail.com>, Palmer Dabbelt <palmer@rivosinc.com>, Patrick Bernardi <bernardi@adacore.com>, Patrick Palka <ppalka@redhat.com>, Paul-Antoine Arras <pa@codesourcery.com>, Peter Bergner <bergner@linux.ibm.com>, Philipp Fent <fent@in.tum.de>, Piotr Trojanek <trojanek@adacore.com>, Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>, Richard Biener <rguenther@suse.de>, Richard Sandiford <richard.sandiford@arm.com>, Robin Dapp <rdapp@linux.ibm.com>, Roger Sayle <roger@nextmovesoftware.com>, Sebastian Huber <sebastian.huber@embedded-brains.de>, Segher Boessenkool <segher@kernel.crashing.org>, Simon Rainer <gcc.gnu@vvalter.com>, Steve Baird <baird@adacore.com>, Surya Kumari Jangala <jskumari@linux.ibm.com>, Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>, Tamar Christina <tamar.christina@arm.com>, Thomas Neumann <tneumann@users.sourceforge.net>, Thomas Rodgers <trodgers@redhat.com>, Tim Lange <mail@tim-lange.me>, Tobias Burnus <tobias@codesourcery.com>, Tom de Vries <tdevries@suse.de>, Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>, Ulrich Drepper <drepper@gmail.com>, Uros Bizjak <ubizjak@gmail.com>, Vineet Gupta <vineetg@rivosinc.com>, Will Hawkins <whh8b@obs.cr>, Xi Ruoyao <xry111@xry111.site>, Xianmiao Qu <cooper.qu@linux.alibaba.com>, Yannick Moy <moy@adacore.com>, bors[bot] <26634292+bors[bot]@users.noreply.github.com>, konglin1 <lingling.kong@intel.com>, liuhongt <hongtao.liu@intel.com>, liushuyu <liushuyu011@gmail.com>, zhongjuzhe <juzhe.zhong@rivai.ai>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/4/logs/stdio
- warnings (24): https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/4/logs/warnings__24_
- 5: make check ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/5/logs/stdio
- rust.sum: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/5/logs/rust_sum
- rust.log: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/5/logs/rust_log
- 6: grep unexpected rust.sum ( failure )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/146/builds/177/steps/17/logs/stdio
A new failure has been detected on builder gccrust-fedora-arm64 while building gccrust.
Full details are available at:
https://builder.sourceware.org/buildbot/#builders/179/builds/153
Build state: failed 'grep unexpected ...' (failure)
Revision: a16c35340c833ed25035c664ee33551d17309601
Worker: fedora-arm64
Build Reason: (unknown)
Blamelist: Aldy Hernandez <aldyh@redhat.com>, Alexander Monakov <amonakov@ispras.ru>, Andreas Krebbel <krebbel@linux.ibm.com>, Andrew MacLeod <amacleod@redhat.com>, Andrew Pinski <apinski@marvell.com>, Andrew Stubbs <ams@codesourcery.com>, Arnaud Charlet <charlet@adacore.com>, Arsen Arsenović <arsen@aarsen.me>, Bob Duff <duff@adacore.com>, Chenghua Xu <xuchenghua@loongson.cn>, Christophe Lyon <christophe.lyon@arm.com>, Chung-Lin Tang <cltang@codesourcery.com>, Claire Dross <dross@adacore.com>, David Faust <david.faust@oracle.com>, David Malcolm <dmalcolm@redhat.com>, Eric Botcazou <ebotcazou@adacore.com>, Eugene Rozenfeld <erozen@microsoft.com>, Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>, Francois-Xavier Coudert <fxcoudert@gmail.com>, François Dumont <fdumont@gcc.gnu.org>, GCC Administrator <gccadmin@gcc.gnu.org>, Gary Dismukes <dismukes@adacore.com>, Georg-Johann Lay <avr@gjlay.de>, H.J. Lu <hjl.tools@gmail.com>, Harald Anlauf <anlauf@gmx.de>, Hu, Lin1 <lin1.hu@intel.com>, Iain Buclaw <ibuclaw@gdcproject.org>, Iain Sandoe <iain@sandoe.co.uk>, Ian Lance Taylor <iant@golang.org>, Jakub Jelinek <jakub@redhat.com>, Jan-Benedict Glaw <jbglaw@lug-owl.de>, Jason Merrill <jason@redhat.com>, Javier Miranda <miranda@adacore.com>, Jeff Law <jeffreyalaw@gmail.com>, Jiufu Guo <guojiufu@linux.ibm.com>, Joffrey Huguet <huguet@adacore.com>, Jonathan Wakely <jwakely@redhat.com>, Jose E. Marchesi <jose.marchesi@oracle.com>, Joseph Myers <joseph@codesourcery.com>, José Rui Faustino de Sousa <jrfsousa@gmail.com>, Julian Brown <julian@codesourcery.com>, Julien Bortolussi <bortolussi@adacore.com>, Justin Squirek <squirek@adacore.com>, Kewen Lin <linkw@linux.ibm.com>, Kewen.Lin <linkw@gcc.gnu.org>, Kito Cheng <kito.cheng@sifive.com>, Kwok Cheung Yeung <kcy@codesourcery.com>, Kyrylo Tkachov <kyrylo.tkachov@arm.com>, Lewis Hyatt <lhyatt@gmail.com>, LiaoShihua <shihua@iscas.ac.cn>, Lulu Cheng <chenglulu@loongson.cn>, Marc Poulhiès <poulhies@adacore.com>, Marcel Vollweiler <marcel@codesourcery.com>, Marek Polacek <polacek@redhat.com>, Martin Jambor <mjambor@suse.cz>, Martin Liska <mliska@suse.cz>, Max Filippov <jcmvbkbc@gmail.com>, Palmer Dabbelt <palmer@rivosinc.com>, Patrick Bernardi <bernardi@adacore.com>, Patrick Palka <ppalka@redhat.com>, Paul-Antoine Arras <pa@codesourcery.com>, Peter Bergner <bergner@linux.ibm.com>, Philipp Fent <fent@in.tum.de>, Piotr Trojanek <trojanek@adacore.com>, Prathamesh Kulkarni <prathamesh.kulkarni@linaro.org>, Richard Biener <rguenther@suse.de>, Richard Sandiford <richard.sandiford@arm.com>, Robin Dapp <rdapp@linux.ibm.com>, Roger Sayle <roger@nextmovesoftware.com>, Sebastian Huber <sebastian.huber@embedded-brains.de>, Segher Boessenkool <segher@kernel.crashing.org>, Simon Rainer <gcc.gnu@vvalter.com>, Steve Baird <baird@adacore.com>, Surya Kumari Jangala <jskumari@linux.ibm.com>, Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp>, Tamar Christina <tamar.christina@arm.com>, Thomas Neumann <tneumann@users.sourceforge.net>, Thomas Rodgers <trodgers@redhat.com>, Tim Lange <mail@tim-lange.me>, Tobias Burnus <tobias@codesourcery.com>, Tom de Vries <tdevries@suse.de>, Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>, Ulrich Drepper <drepper@gmail.com>, Uros Bizjak <ubizjak@gmail.com>, Vineet Gupta <vineetg@rivosinc.com>, Will Hawkins <whh8b@obs.cr>, Xi Ruoyao <xry111@xry111.site>, Xianmiao Qu <cooper.qu@linux.alibaba.com>, Yannick Moy <moy@adacore.com>, bors[bot] <26634292+bors[bot]@users.noreply.github.com>, konglin1 <lingling.kong@intel.com>, liuhongt <hongtao.liu@intel.com>, liushuyu <liushuyu011@gmail.com>, zhongjuzhe <juzhe.zhong@rivai.ai>
Steps:
- 0: worker_preparation ( success )
- 1: git checkout ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/1/logs/stdio
- 2: rm -rf gccrs-build ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/2/logs/stdio
- 3: configure ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/3/logs/stdio
- 4: make ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/4/logs/stdio
- warnings (31): https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/4/logs/warnings__31_
- 5: make check ( warnings )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/5/logs/stdio
- rust.sum: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/5/logs/rust_sum
- rust.log: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/5/logs/rust_log
- warnings (6): https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/5/logs/warnings__6_
- 6: grep unexpected rust.sum ( failure )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/6/logs/stdio
- 7: prep ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/7/logs/stdio
- 8: build bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/8/logs/stdio
- 9: fetch bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/9/logs/stdio
- 10: unpack bunsen.cpio.gz ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/10/logs/stdio
- 11: pass .bunsen.source.gitname ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/11/logs/stdio
- 12: pass .bunsen.source.gitdescribe ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/12/logs/stdio
- 13: pass .bunsen.source.gitbranch ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/13/logs/stdio
- 14: pass .bunsen.source.gitrepo ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/14/logs/stdio
- 15: upload to bunsen ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/15/logs/stdio
- 16: clean up ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/16/logs/stdio
- 17: rm -rf gccrs-build_1 ( success )
Logs:
- stdio: https://builder.sourceware.org/buildbot/#builders/179/builds/153/steps/17/logs/stdio
next reply other threads:[~2022-09-27 6:49 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-27 6:49 builder [this message]
-- strict thread matches above, loose matches on Subject: below --
2022-12-09 11:17 builder
2022-12-07 15:50 builder
2022-12-07 15:47 builder
2022-11-30 10:53 builder
2022-11-07 14:09 builder
2022-10-27 19:59 builder
2022-10-26 16:25 builder
2022-10-21 16:03 builder
2022-09-30 16:21 builder
2022-09-27 7:02 builder
2022-08-31 10:44 builder
2022-08-25 16:37 builder
2022-08-22 15:30 builder
2022-08-19 15:07 builder
2022-08-17 12:54 builder
2022-08-09 15:36 builder
2022-08-09 15:33 builder
2022-08-09 14:53 builder
2022-08-05 13:57 builder
2022-08-05 10:37 builder
2022-08-04 20:34 builder
2022-07-22 11:58 builder
2022-07-15 17:46 builder
2022-07-15 19:18 ` Mark Wielaard
2022-07-07 10:34 builder
2022-06-01 9:33 builder
2022-05-26 9:53 builder
2022-05-26 13:15 ` Mark Wielaard
2022-05-19 10:43 builder
2022-05-11 18:06 builder
2022-05-11 18:30 ` Mark Wielaard
2022-05-10 18:05 builder
2022-05-10 11:00 builder
2022-05-10 11:38 ` Mark Wielaard
2022-05-10 12:18 ` dkm
2022-05-09 11:33 builder
2022-04-28 19:48 builder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220927064933.CD4123858C2D@sourceware.org \
--to=builder@sourceware.org \
--cc=gcc-rust@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).