* Re: pre-egcs 1.1 status for *-rtems [not found] <Pine.BSF.3.96.980710084804.8580W-100000@vespucci.advicom.net> @ 1998-07-10 11:00 ` Jeffrey A Law 1998-07-10 13:32 ` Joel Sherrill 0 siblings, 1 reply; 13+ messages in thread From: Jeffrey A Law @ 1998-07-10 11:00 UTC (permalink / raw) To: Joel Sherrill; +Cc: egcs In message <Pine.BSF.3.96.980710084804.8580W-100000@vespucci.advicom.net>you e: > > How about a pointer to cvsweb which will allow you to extract any > > patch you want :-) I'm sure you've heard the "give a man a fish ... > > teach a man to fish ..." story :-) > > > > http://egcs.cygnus.com/cgi-bin/cvsweb > > I got the i386 patch from there and applied it to acconfig.h, > configure.in, and config/i386/gas.h. > > I then ran aclocal; autoconf and did a rebuild. I got the same error. > > Do I need to do something different to accound for the automatically > generated files? I think you missed one (probably because I forgot to check it in with the rest of the files) -- config.in. It should have stuff like this in it. /* Define if your assembler supports specifying the maximum number of bytes to skip when using the GAS .p2align command. */ #undef HAVE_GAS_MAX_SKIP_P2ALIGN /* Define if your assembler supports .balign and .p2align. */ #undef HAVE_GAS_BALIGN_AND_P2ALIGN You can regenerate config.in by running autoheader. jeff ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-10 11:00 ` pre-egcs 1.1 status for *-rtems Jeffrey A Law @ 1998-07-10 13:32 ` Joel Sherrill 1998-07-10 13:32 ` Jeffrey A Law 0 siblings, 1 reply; 13+ messages in thread From: Joel Sherrill @ 1998-07-10 13:32 UTC (permalink / raw) To: law; +Cc: egcs On Fri, 10 Jul 1998, Jeffrey A Law wrote: > > Do I need to do something different to accound for the automatically > > generated files? > I think you missed one (probably because I forgot to check it in with > the rest of the files) -- config.in. > > It should have stuff like this in it. > > /* Define if your assembler supports specifying the maximum number > of bytes to skip when using the GAS .p2align command. */ > #undef HAVE_GAS_MAX_SKIP_P2ALIGN > > /* Define if your assembler supports .balign and .p2align. */ > #undef HAVE_GAS_BALIGN_AND_P2ALIGN > > > You can regenerate config.in by running autoheader. Unfortunately, I have that in my config.in. I think I have all the patches. Unless you see something obvious, I think grabbing a newer snapshot with this change and the other ones breaking *-rtems would be the best thing. Any idea what snapshot to grab? --joel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-10 13:32 ` Joel Sherrill @ 1998-07-10 13:32 ` Jeffrey A Law 1998-07-11 7:07 ` Joel Sherrill 0 siblings, 1 reply; 13+ messages in thread From: Jeffrey A Law @ 1998-07-10 13:32 UTC (permalink / raw) To: Joel Sherrill; +Cc: egcs In message < Pine.BSF.3.96.980710145731.8580J-100000@vespucci.advicom.net >you write: > Unfortunately, I have that in my config.in. I think I have all the > patches. Unless you see something obvious, I think grabbing a newer > snapshot with this change and the other ones breaking *-rtems would be the > best thing. Any idea what snapshot to grab? What are the contents of gcc/auto-host.h in your build directory? We'll start by making sure autoconf did the right thing :-) jeff ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-10 13:32 ` Jeffrey A Law @ 1998-07-11 7:07 ` Joel Sherrill 1998-07-13 0:06 ` Jeffrey A Law 0 siblings, 1 reply; 13+ messages in thread From: Joel Sherrill @ 1998-07-11 7:07 UTC (permalink / raw) To: law; +Cc: egcs On Fri, 10 Jul 1998, Jeffrey A Law wrote: > > snapshot with this change and the other ones breaking *-rtems would be the > > best thing. Any idea what snapshot to grab? > What are the contents of gcc/auto-host.h in your build directory? > We'll start by making sure autoconf did the right thing :-) I think these are the relevant parts: /* Define if your assembler supports specifying the maximum number of bytes to skip when using the GAS .p2align command. */ /* #undef HAVE_GAS_MAX_SKIP_P2ALIGN */ /* Define if your assembler supports .balign and .p2align. */ /* #undef HAVE_GAS_BALIGN_AND_P2ALIGN */ So wouldn't this be right? --joel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-11 7:07 ` Joel Sherrill @ 1998-07-13 0:06 ` Jeffrey A Law 1998-07-13 8:48 ` Joel Sherrill 0 siblings, 1 reply; 13+ messages in thread From: Jeffrey A Law @ 1998-07-13 0:06 UTC (permalink / raw) To: Joel Sherrill; +Cc: egcs In message < Pine.BSF.3.96.980711090701.4217A-100000@vespucci.advicom.net >you write: > I think these are the relevant parts: > > /* Define if your assembler supports specifying the maximum number > of bytes to skip when using the GAS .p2align command. */ > /* #undef HAVE_GAS_MAX_SKIP_P2ALIGN */ > > /* Define if your assembler supports .balign and .p2align. */ > /* #undef HAVE_GAS_BALIGN_AND_P2ALIGN */ > > So wouldn't this be right? Right. Something has gone wrong in the configure process. You're working from a single source tree right, with some recent version of gas? If so, I would have expected both of those to be defined to "1". Can you run sh -x <srcdir>gcc/configure <whatever args you need> and send me the output? jeff ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-13 0:06 ` Jeffrey A Law @ 1998-07-13 8:48 ` Joel Sherrill 1998-07-13 21:58 ` Jeffrey A Law 0 siblings, 1 reply; 13+ messages in thread From: Joel Sherrill @ 1998-07-13 8:48 UTC (permalink / raw) To: law; +Cc: egcs On Mon, 13 Jul 1998, Jeffrey A Law wrote: > > In message < Pine.BSF.3.96.980711090701.4217A-100000@vespucci.advicom.net >you write: > > I think these are the relevant parts: > > > > /* Define if your assembler supports specifying the maximum number > > of bytes to skip when using the GAS .p2align command. */ > > /* #undef HAVE_GAS_MAX_SKIP_P2ALIGN */ > > > > /* Define if your assembler supports .balign and .p2align. */ > > /* #undef HAVE_GAS_BALIGN_AND_P2ALIGN */ > > > > So wouldn't this be right? > Right. Something has gone wrong in the configure process. > > You're working from a single source tree right, with some recent > version of gas? If so, I would have expected both of those to be > defined to "1". Yes I nearly always do single tree builds. I am working with binutils 2.9.1. Depending on what I am doing, I have been switching between newlib 1.8.0 and 1.8.1. > Can you run sh -x <srcdir>gcc/configure <whatever args you need> and > send me the output? Below my signature. :) It is just at the limits of what I would be willing to send to the list. --joel begin 644 j.log.gz M'XL("+/^J34``VHN;&]G`.U]>W?;-K;OW_6G0'/=D\2I)$MVG-CG:-9R'2?U MG<3.M9V9=.*4AZ(HB6.*5$C*D=O5[W[Q)IXD*,N9CD?M2D)B/P!L_/;&!@B* MSX`?>),PGO4WGJ'+83CRYW'AS;)P%"WZG7F>=>(T\&-")IP`M%I?HV+2&B?S M5CP$Y7]^EOG).`1%"KZFV35`7.#-Z0<0#]LKT"")^;F+F)__"ROF8GGA#T0I M46R>AX#0HR0O0G\(TA&8I'D!AN%@/@:C-)OZQ4/I!5<6QB,`*I0=OWV]-D@S M@W!5V&-;U(=?G9R#?!8&T2@*<S",LC`HTNP6J9W-"X!YH>(@G@_#M5'OQ:BE M21:+%BUM02&D9@-8_ZNH8/SL&9C`1H<9&$5Q^&""W'_@P*$ZPL0?Q&$KF(3! M=92,J1I2"L+%+$SRZ"8$V3QI%=$T!)AQ/>C_F8,NRK:"V2R.!E3V`[01+8`& M`4=K@*P!4@,0@7?B1R._;"[B+2:DH@RJ3PIH@QS6,9S'848DAU%N$'V5)H\+ M/!YV>5P_)%?8J_"S<5CDX.LD"B8@00,8Q[>L_]$Z`URC^T&CFP_$R,^+%AQ( M.A@Y:[\/$`5;E='`+$O'F3]M`W`LM&SM*6M/67N*DZ<(AB@F&1P+#EI:(2F% MW?(AWG#K<?O`FR/9C%2Z__;D)R2-S(`NJ?C,#ZY-"IZ!P3R*A_W3L]-C>!/X MT%`>PD*_W0G29!2-V[@,TL)%&+"-.LJ.@,ZND]0+8%5%V,<W23H321!X\RR/ MT@119274,)ZY-)^/#*4%=+\<^9:7^-.PG_^X@/]#>@Y;GA1]?$5:DF<!<A%X M1;K---V$V2#-,<O"8^/'B`L/0C7SLZ@L&D0)TK/YNV"&/SJP%-5A)N:$"E6A M8@,#I4">H5_XA($+3_P,63V_S=$XR,2P0$*890@#61'*Y""=HGI1]#!0;_R, MM,K<(DBCYI#%:"$DI_%0X,![MB4Q2D:I*CA*(6'J)W(Y+$"=F*-VY&@<WKU^ M>_CF`E\=_O68W\"99.HOX&R2A7!8$C@DW1XIAIIN\,B&,-ZV$K`!PUD83%+H M%'2PHYV7>ZVL"*<YHN7A$.2=3RW/;_UVV/K'=FO_\U:_TR'*(%ZAC"0!#%J$ MR@0IH69ATF)UMN!TTVEM84JG0V[[[2U6,_7-?BF$5<DZE'9W.F-3QU695L?# MC'(M'F(16G\;HOOP!@9*U$:/L/0?P_+'2)=82'B=C1`/ES`"$>(=*G6X&T&4 ML1@!L=08`09&W0BPL-((/+2H7-PZ[&G'))V&G7^F8=P)QT'>ZN[OO]S>Z[WL M-$>MDRK0I%ZQ=S#:SD`V!:U1!E`P0J0M?#4,1SFZRD+\5WL+;+7QW29L6Q"' M?H(GD_R_X>P1%:`+_^^![G.F'O0!-3L)@^P?9*;+293CK`155/@PO0)^<@NF M88YFPAQ-!<-Y`&TSN(4<TQGDS/"D'8<;,#5)4.9"9K!Y%OZ(,AX_&I*L;(QH MT:@DP^!T#57Z8!K!@'D-<RUB7<[@02/G?6.A.=@X,JKQ8BDQU=]6H`3>412O M6%U#]'.8Y&'1Z`ZA-1L9T-J>4("1CLV3Z,N<9CQ%%H;M@$/_-^K8)(-@CRI# MYOUX_DG'_7:[`SDZXR#H<"MQ7[<1L4__T/GT:^<S^K.U^<,/I:'1-%D*LO8L MRB+8RX59,TMW=/'OH3W$YLB=M5&U;I2-OWJ"6G[UM`,;?]7]H:IN8DK2"X=A M!]_#_M&TZ^CL]/7)&^_BY/+8!3$D;6*9*\H!@8L4S*=$&=[NS$E:J[.AO+UV M/0='HX'3;!S>4*G*5$W%(`L713^@>)O-^IM'[]\#]!=.N1@.<42%Z=K142L( M_@"M`+)@AI*5NU=[DV@%W;_\UW.B`&9JUX)TRGD-:C;?OK+HVX1+F`NF-<C2 M/*<M@QU$X7B<A3/`IPPD"@E7O*#[8^_'G0V>!R2=1=)A4HN$<<%)CDJJ<K`5 M2;^54)/0^(^7%UDX36_"?H82;3C\0]+?&&>TM]-!&D<!*P(M%"Z"=';;#V9L M<&&4XK$*!4J8=M"X0E(,;Q3[8S&#J!#P<XV;L^)MCGZ2:H0P'IF*\:+!>!SC M$_1=?H\B$/ALCL$+1*1-6_"UE6=<373&SYYI6B`F8<8?)?T@*`WF%/71JMLC M:VYCG_%*V6,K9:V$F)'G_;283`XYA$=,_<>?+SRVJ,2>.A)C)]H(\N.XE4\J MZ6T;'5Y**H0*)2Y"HJQ>/NG;=$#?10M8V)=K(2(;=)%(X8WG,,=2M-$@@DD2 M,UR_F5DA0<D=C'QDVK)I@,O#9!?2#P1?Y?M2>)L-KH]A$`7%[2QLM]M@HY+* M`BBK^>#%\YT#N\(-LL/A^7'DLXT`2UN9803^:`]&^%G0@F%@OD")$.E'16=- M$GB+Q4"@73%22+C[%<W0K<];5T];XE4;_K/9N>IV6&N#V1Q7<'>=/:[S)DR& M:=:?!7=7NL.5IGE?M(Q%K<F(&G3H%I@5/&:Z#I\7NP=52LM00B$A+>SL.+#M M0<!N<6G2?;74>>AIN_#@[XB#OXS&GJ#1,/3+J-P15,*!9]8P*%34ZX.-=SCM M8VTDZT.]WSNH4+E!-U*E6"$5&1V@42@@.[7W%0M(6U<<#(C254<#HG7Y<("G M0(V`EAWZVA.-)/I#MIAA*B$7;&C[UZ6*%LX\"S"<3Z>W@*R'X'SX-<V&?7*G M015MST.2#%"A4(/ER^[^@2;.S;SY.YI_;_!"U3LZ>@9;\\<&W>3"O7MDXGC$ M$B9CLD6VA$Y>7_3!=W2;)/=O0B\:Y;2$T@Z$9$-8!HT3OVCMM+L]OS-+OX89 M\URZE\X2(D<)99FI2L$_T4W8P<(MM/+:WJ^IQR+1X<-7&HL.(DNL2I-P$C.8 M,-KH4FZS!0I?)V$Q"?'#*G#$=[C`$[3^!T_QH\]<QHFKA`ZB_;V#9A4_M'5D MX!?,+Q3;['>W#Y";K*P!C[AW*I4@^XKJX7]<#;0\;3Q!3<Y),B@#'%ZN\W*/ M2J#@?I-UD;*9*U3$H(@4"`M*>`G#`)9MBM0(;:SBNEN,U@BW%GG=B#O;[B@V M*&5=@YW$_51A4MWYKR'PLQ#,T3H1GT8X,G?2S&?HS'-#9W1A<ZB'G:R+]8S% M&NRI2^"]$HZF(KL5G/%8P8W)?79W)?<118R>@/BQ)RC*Y::SIS56I)*"-S`2 MEVV'5.](?*R(YZVRI+RRCC)JF1\$X:S(06ML'F&=1^_E\WW#Z,J"YI&%;CRN M&UK.8QU;K/<FC89@].3I[W\@!FSS,0K/DMGEK7"Q!FI8'$G$0,4O4\L`R>F$ M.%QT`%`SSGI5PX`>UR`E.30.>E;\AWDDC&SZ8+Q\81@,359*YA"5#Q"[0?GK M[0_MSK/6#YXW\^B./J+V)7YIL!"%_`6UUXVLSESMOL](-X0!8@W!;@V3*/PB M%JZ.-A67/4)7V#W%4B++DQIZRX2-;20@>59#5T`D&\LFJIC)QO:(H<N`-P6= M%\>7'AKJOC+47Z^%Q)W>&C-W1--3=U:J`:^[W=L^T#68<7+X][_6H8.Q_%OE M[]2>]Y_`JQ7QO6Q5GT30Q!1FFV:#3H%5'C2&*7TA(1!+KROQAZ_-=*:KQ/$H M#A<"CNFM$<>(IN.8E1IP_+Q[H&LPX_CM\<<Z'#.6?RL<4WO>/X[5BAQQK(H9 M<&S2;,%Q"29AT!BF=!PSE91!X&5#*<(17RN-88O!`12TP?;V]BLZJ!(EH!6/ M8AW`.MT`Y9>[!U5:.:A'L4<H]ID?MM:[\;.^Q"IY!.+@U`JWT/FLOL'<`*TW MT42&_T4M!Z!RG=OM;N_<_T*7U**N=$G")Z]W29,K5KW*"0_#4L1@.SD?,9"4 M5&2+65#-1R118RHB<33(0J!SP!K[!&SV%#A.JK:`1*IA$'JF_1XF(Z!T'`@. M?FH$J('%BDW9MNC,J\=6(_`?6+]$,G#*E9''[0:E!DG&C1L$:^J#.-%M7V5M MB+YJ@XL,!IL_?VFV.1.SFMV[<#`\95K>]()SN5G?N^!G&UR'0!!AX]#*\5"0 MPKK10.'X)HWAQ!B'>G@7*0;[[ZNY-N/7#1]XC%9E>86K;B/%%'-[VSTIYCKO MC1IC*]:&8VO`0ZH046DH5>*FNF+7.F>-BW6;+Z3?90*:^0DY7LY24%Y@'&A" MU8>Y+#=8H/?\P*3%G(J>'Y["2%N7C0I<_U8)*;?N_:>D>E6.2:DN:$A+S=HM MB:D(,GD$2[C9\U/.HHJP`98A2^]X88GU092G,*C="FC'13:P8Z*.=5YL@/KS MO0.##C/2?SFL?_C'>?ZM4,ZL>O\@UVIRQ+@F9X"X4;<%X8Q7&;J^`#D=X"H' M&TJA"*.&WU?SRF?)=#4JO'WPT\4K_!`&&A>_14?/P&F(K^(T.,&^Z@0V>6DI MJ;J(7TS8.;HJ+U'9K(ZB>T=9HGE'@T?=:E_<1?,@1<)+2-;7:7UBOKQH?7-M MDH8Z97<TM4KF,%0N,Q@TV#1;]%6TM*J-%:TS:*2W$)4E`6_[#_/9-!^;Y'2@ M]U4NX3`IZ.F3J'A,^>3TXO+P[5N+"NR")I*97=@(HGJ]]^=G;\X/W_4W?Z<E M?YCY7AU>'@I,H#4%>[N[IE@U2;^B%X6R>4*?&\^@O;(T"/,\51Y:U[+JT6IG M]\6!8UWR;&N/7/@@ROOWM0=[*(LU8D&&/GGJRA-W]K17.M0A+AO^TAF&-YUD M#D>H]Y=R#3&WKG9V]EZBU4YSA<;5#M9&GQ0[-HOBOW4#?@5;SX#29K2\RH1# MW1A#!]K21UHP,4'!T*4=I1MV^`?=R87J9'EX>G$"X2"]EZ_-DQ8FW4R[VR\/ M:O5KP")$#Z[>JPX2J%PU2^#5(VJWUUTAHK"V>T=4U?I;@)-@6^L*W++D)F<V MIN$TF&06"-<)C[(P;""*"Y)4564<LI<OO\$V,Z[%99NY8H.9=[[Y.2G)"M;C M4M$T;$^`G^"#Q!UZ._7AZC$M)F`0\O?P+<>E&LGK-GK>[9G.2SEKM04-)%(? M-#C7,OMFS]$&]LKVS;"VN^Z;:9V[V[X998NC:53@=U9M#YER?Q3V"9LW,<$- MA7RF1I]'1(K!,L_535.Q0:;!9RVI!X#$^<UGCN=[VRN<.;"V?_W,(3SU4HPL M/_<R$G6DRD^\%"%E;(T\[D^]K'#W!\$P'(TGT3^OXVF2SKYD>3&_^;JX_:W= M:?UP^-/1J^/7;WX^^;]_??ON].S]_SN_N/SPM[]__.4?GL<<I,B\R3#K_WSX MMV/O[<F[D\L+[V?%R^`D"RNI]3+"9O<RID;W,I'BXF5B@RQY&6Z)4VY6<JZ] M['Z\C!G9Z&4RT='+1*C9O(SQ-/8R'>ZK];*+RU>0W^!E&<2W@Y<AMBHO(VI, M7E92W+RL;)#9RTA+7+Q,X%Q[V7UY&3&RQ<M$HK.7E5"S>QGA6<++5+BOVLO. M3T[?6+RL/F6D?'5^9DP:)9*[IU6DC;PUKKZV3AR_A;/9,D>%VLC=:G)'SK2D MP]UC]D@\SI@^HA,)#NDC.A-6E3YB-<;TD5,<TT?>($OZB%OBE#Z6G&M?N[?T M$1O9ECX*1/?TD4.M(GW$/,NDCPK<5YX^OCWY2?,RLA-5XV.(R>YA1(7N7V6Y MBW>5#;'M?KEXEL"W]JO[\2MB8J-7B21'GRJA9?,HPM'8GU1@K]:;+D_>'6N^ M-`J2(JYU)LQE]R:JQ/"B2$EP\2>A,2:'HJVH]RB1<>U2]^-2U,9&GY)HCDXE M0,SF592EL5MI&%^M7[T^.KU\JSG6/(G@]%CK683-[EI,C>Y;(L7%N<0&F;R+ MM:3>O23.M7_=CW\Q(QL=3"8Z>I@(-9N+,9[&/J;#?;5.]N'T!&:#A@67[[+< M\BL76[YEJ>4W6FCYE<LLWW&1Y:^76/>]Q/+M"RR_^?+*KUU<^<LMK?Q[75@= MZLLJ])`?G0&J]Z?;'/\29H5/<54&OY)H3KXE-<SH7[Q%#CXF\Z[][)[\C)O9 M[&L*V=7?).A9?8YS-?<[@Q.LV/=^N?!>G[S5EV+E(1L'_ZO>WBA5F?VOV3:' MW#";_[EN=RB\:_^[/_^KV/90R0W\KW[[H^1:RO_N=QL$^9]Q*P15G85Y.L\" M-Q]DS-5^6*HT^Z),=_5'N:$VGRQ;Z.:7"O_:-^_/-TM36_U396G@HS(TJ_RT MY%S*5TT.LWI_/3^^./MP?F3VV9F//J;FXK"8L]I;J3*SJPI$5S\5&F=S4MHJ M-P\5F=?N>7_N2>UL]4V)WL`Q!0A6>25E6\HE-7]8O3^^/SP_?&=-8!V.G-`$ MH>K02:G,GL,V.7@B-ZXJBW4[?*(PKYWQ?O-8ZP$4E=XPDZT[A%*R+9W+WN=! M%)K,ZD=1OOI14>N'B,GN@D2%[GUEN8OCE0TQ^1QI0;V["7QK3[L?3R,F-CJ9 M2'+TKQ):-M<B'(V]2@7V:AWJ[X<GE\:)S<F?4+2H]JE2E7E6:^9;<L-L<YJK MCRF\:S^[OQFMPM=4<H/YK-[G2JZE9K/[]3TTF1G]CWQ]J_[(%_E(E_W0%U5C M./8E4`Q(TGXP3&R0\>@7;8G#X2^1\YM[W-[V*CT.:[L'CY.&8N^`6_\`G$)8 MSH,)^3@L'!?^67O!29>3UC&PK"@8^9!IR#X.`^>O_(`,J6"CY2()`P_^((%Z MKDVDN1YL$QS(>K2-\JCQ0WCG&VMFWTZ8H!^]X8WA%<\<?7I6Y]0SNU?/JMUZ MKZ?^P.NLSJ]G[HX]^Q=[]L[N*CU[9_?/.9=R*QNG4H7JZ`4S%S>8V?S`/H\2 M5U#;I(&:O7X?S&9@GL"Z\L)/ACG^:1CR8D,TN@7I+,S\0OTIFN:RAK'>,WT\ MQ4VCX#?\UR-QKSEK]<]H&GB7^5&`O1<[*_Q1`*QM93^F*7?QCC^I:8R(45*@ M[]`9-\YDFJ&OVL^HE1+ZX%)?8"R6L%C)O,SPOMC>7^'P8FVUP[NJ2;V$@F8/ MRTPM3Z>6(VQ9D<X-OZ$G$`P=W^GI+^<A=FWV&\V3P*/$BIE/8UMJ</>^P5>V M2"UW_%48UY\=%\TB3U,ZI6Z*$B6,TY/(L,Q[<VS\BPS8%W?`OK+CJSK4$/ZR MW.79A[?506N0AWX6&"*60'"!,&4W0Y@2ZR`LLJTAK)K%`&&)X@1A/DPV"%.& MQA`6QG^%$/[IXOCP_.CG:@A#[X$YK9J2J13'.(SYK8$84QTB<<FWQK%F%W,L M%DBNP9B.544TQAS+A&,.@]7&X^/S\[/S:C3/YD68W!@6U;S<!<F$VXQC0JM# ML<"UQK!B%0."18(3?MD(V=!+Z(VQ6P[\"I'[_L/E\>G?:G`+UZ*&WT_GQ4ZH M1<P6T")2+68YTQJRLE%,B"W+W0!+!L>*5T1N#E<VXJM$Z]G[X].:K#=(9[>& MG)<5.V6\B-F2[R)2;;;+F=9@E8UBRG3+<K<\EPR.-<M%Y.8Y+AOQ56:X1V?O M?ZD!ZV]AEAK`RHJ=P(J8+6!%I%JP<J8U6&6CF,!:EKN!E0R.%:R(W!RL;,17 M"=9_')^?U476Z<P46$FI6UR=ZI_IHUX[K?I$G\RSQJED$V-,G5H_N6<,J5/S M9_8X=8F`2H9ZI?'TW?NZ;?JAZ=NJO-@%HYC9#%),JD-IR;2&J6P4`TZ%<B>@ MTL&Q(163&T.5C_@*L7IR^NKX8S58,PM:LT9PS2KPFCD!-ELCUH#8S`;9K"EF MLQK09LNA-KL/V)X[X#8OLF!BWI&EY8[[L?@#"I;=6$ASV(ME7&O<*E8Q[\-R M@NLN+/G$A7T/%M*7V8&E`[_:_=>CGVMV7V'%5N`V1&XE=!VQNP:O$;QV]#:' M;RU^EP7P_2"X'L+7D>FK?JS4!;R(UXQ<1*F#+>=98U:RB0&P9;$36LFXV*"* MJ(UQRH9ZA2#]Z\G;FC,'X[#(\'<F=)A*)!>L<@$S8#FY#K4RXQJZNF$,^%5H M3B`6!LR&9,[2&,X2&E:(Z3?'E^?XRR4UV8,=V'E38.?5P,Y=@9VO@6W)(RJ` MG2\![+P>V/G2P,[O"=@7;L#VB]3XJ6!6[`)HS&P&,R;5`;ED6H-8-HH!P$*Y M$WCIX-B`B\F-0<M'?(6`/;P\JTLO8+5?C%C]T@"J7ZQ(_>(`U"\/#:>*@KL< MPS9`^(OT(I5<Z@K?+Y7H_>+ZVI1Y7K_-4?W&-X<9P6E.)^R6&9T0:^=S@>T! M`>S.LSDQBVDN%REN,SD;)NL\3AB6>967C?\JY_!?+H[.3E_7//7*_3R((L-S MKY+@].2+L%N>?1%B[=,O@6T-8=4LIB=@(L7M&1@;)NM3,,+0_#E8.?ZK?!)V M<7AQ=')2NVV`?M4E'0U]P]DME>JX><!EK/L'G,-A"T'F76/;:!OS1H)"=MU+ M$,:O8CN!<RVSHR!!9+6;"N@GA,Y>OSJL.0%V,\NBI##D'P+!,,@OU7<**;L9 MZI18AW*1;1F`O^SN?@.`XUJ^)<"I60S8EBA.L.;#9$,T96CP"C09$,[U/6.[ M&='6P>MABJ_[1D8-E_QKY9,0$!T`M:V(TB0'^7PV2[,"_*"<!6L@I(_I_K;Q M:^G5J@2LT_<_R6EE+.'-"O-3N`I6*^;5946%#^SW=KZ!#^!:[N@#9D.(6,XL M#L*`GH7XK_86V&JC"QV;&G8MD9"-^-2/XS0`TSD4&X1@&`:QGX5#,](JF`T6 M>]XU(,RB0D<6HGA)&`[#H4>$JL!EX5XFINZ_7.5[]UC;7=^[Q^VT]I2N]ZOI M]EAIE5-,;>5;>C>`82(+FX"PBML5A38=U3"D4JXX%-D?.!!I5^U(%!D:09$* MUF.1,MX9C$$3+%8PNT+1HJ(:B4$C(`;_,3@,:F`8+(G"P!&$P6HP.,K"T!&! M5E97_!D55*,/B;ABC_,^<.2A?MIQQZF-4(>DZC&'N.Z,./PVEB/D[+RNF#-K MJ`:=_37`2N8'#COR*I\5=R6Y$?!,+_S9V.X./?1NE2OTK+S.T#-JJ(&>]:6^ M2N:'#CW\8IX=>IS<#'J&U_=L;"N(>M.9<]"SL+K'/(."NI!G>46OBO>AHPZ] M9U<1[RBU8;C37L:S<-T9<?@5$D?(V7E=,6?64`TZ^QM,E<P/'';D%20K[DIR M(^"9WE.RL=U]EZ4)]BJ8G?=8ED%?Q0MTU=P/'']9#0"S)1%H?%7.RG=G#(Y# M](,ZCABL8';%H$5%-0:)D"L&!>X'CD'24SL&!7HC#!*Y>@P2OCMC$!VD=$2@ ME=45?T8%U>A#(J[8X[P/''FHGW;<<6HCU"&I>LPAKCLC+A]DUXZ(L[*Z(LZH MH!IQ2,05<9SW@2,.]=...$YMA#@D58\XQ'7W&#=`#^P=@YR5USG*&374A#DD MXQSG./,#AQWN:$6DX^1FH0Z).<0ZQ+:*Z77D/KV:61M,K[J"VNG5?"JKBO>A MHP[VLW)Z'2TUO:IGKBQ<=WV9P,NC<1Q!00(`'QU:`E$"8''BQ^T)^K+-/($, MQL^K+*%`&YW>=M?P3;,F:K5#A-A(@I**@X1&UB40V]ONO5@=8HFVNR+6W,,[ M?F]BZB>PY?UV%UZG@W_B:U398![%0V\Q]=#WD/IBP3`<14F8EV51DA=^'-// M'^3>,,KZM*Q%RUJ%GW'^<!&B:N#]),T+L0YV+U1!B_SK4.8JLGD">Q!Z4#-< M"_'R4GDZ+[B(K*"0[B![YK/&EP4S/\]#Z3XKQ%OR?I)0`JTGW.'&R$7(Y5F) MW,E1G/JPL6DV]7'3YWGH!6D<AT'1PPW&??2"V1Q)^?,8<WT""Q@>ON^#!1K6 MSTA/M(B2()X/H5KA&E+<QV@ZA/7,1K$_QDTSV'D\'."0E7O,Q-`XQ81TE%F? M?A.'&7GLYQ2HXV3NQ4/VJ9S$'\3L8U)Y^2VI:._E7FL6M.(HF2]:4`11T#>E M\DZKO;79Z2#\0FN@[VST$;-TOX/O"XHK=-M!?Z'(`A9BZ6+:$@EL1.CK@,<? M3R[!^[.+DX_@IXO+\Y/3-S*2%J1Y:E6X$*L4<%807H`YBE8`L53,1R,%7;!X M$(ZCI`V#![V\(-=A,N07%]A!Q;%^!^M!U;2C1+6P!"UJ&0@<(*!&1Y<%=+W^ M#I;>0:##HI\`OS1@=*>LBW(O9+-SBAQMM+'18D_5"-TU*"''[P[3)*067,>1 M=1Q9QY$_01PAR0L/)0YA1<HOM)%2LXVJX8)UT&%2E1N&L29!47U8*%:*Q)#4 M6X>DAQ&2=DA(@BXXS2O#T<XJPE&E.&Z#&F)H:$'_#/PL!`5KJLW!!>?5O52\ M%<`$!+^EK3#ZMH9@N[.+8M.A:J3I4&'A/E3R!()^W0#&BN2PN+>K-A^-^(<< M+83_M]WNY%G0@:[2(2O#CE#S8U"DJ$FS>8$`G>3MC27%W"N=#A\#/X<KP&`" MO16NS/,@BV9X98XG`9<6U.I`WPF=)T7?+Z\6V$@^LI+O;"8*$EP;P2&O%/Z; MI4Y-=E2RJC9SC.(*4=A<HLV.2E#S%,>`3JF4&&9.5'<<XE!+IE\AN!$:+$2? M@S4LR@F7/R_2%BJ!%6CA![F3FH.AZO5"?1E0J?C&A_%`;`>+;"P4RLJ@!*SJ M.J=?GH8:BRGZB]].V!7D9#U5$@3)#,(TIRU/-L3M&*ASX%]C4Y0E<'8JYCD= M@U8"W#N"97((W$9]A]:2C(5T3*)1P0Q9)X\J=+$<LG%?N&>5$-M7"(H]6L+< MY$H=,*$!;$B7'<)).<^U_-(4?6*,SWAVY]N(F[*IV<Q?B6?,\7]H6@,>";R/ M=*HL_<A2.^\*:T!5@DMK&"502F3D)*+-2()KB6BDZL`5J-)RH5%.;1*55(N9 M+'8?-X]Q<9+"[!]5?E'G#HBNNX+5"YJC7I0P0-X%Y;2-)<)QIRSH+E1@*[FD M":R4JD)5;CK5QT:U>C2K1M$2Y8RC5S%PUD"FCIG3,%7&)?O(&`-041>!M.!3 M%W"J0XHAFK!1,H^.:50T\XMCP^8`=1`FUD%0:](,;J"H9N=FGAC-/*DSL]*E M;QWI]1X^^%#/<]CORR26/,_#-V@CX@8N%>$"Q"NR:#P.L[Z06%,26NF1A7<K MA&OO]M;5HZLGGWX%5X\^;UT]_83^;6]UKKH=66,_'`=YJ]?>[[9W=Y"&V=<A MSH;C(=ITZ,SSK$LB7>=KFEUWBC2-\\X`K2*&H&Q%*5FDLPI!SH[$*Y23_1C8 MQBQBFW@84!CG,\_P!`VGHOIZH]UF&:F)RO:_/EOTVD4V^-:!TDI22O45=V^B MNG+_K*NNE[*K9QL!2ZFUZ^-!*+^=XH>]L!!%N03]8H8@!?^T`X4IP#_]Z@UN M/?ZTN;_YY.CH*0IVA3\.O5D&O6IAXKJX/'QS[+T_/WY]\O&IN1%P2>;G8>)/ M0R#L.@"\4X(V4-`3XT#81\$[RC0_\/#3:?4>;#Z!_8&H?VI:F2MKRU(%>G@M M1E7H_<*M44QAP"KT%7(3+9:V&Y]4N34?LY?-J^RA076#+BHUU1FBIC('2P19 MFN>"PW>&X4T'Y7L;EET!%-"ES5'L9T0-FZ^/SL\N+OJM5_A?[^CLW?N3M\>F MRBHC:@>SMY#W\JXV;:AQ_T+:K>2C+^ZX%-D\5(J^1C`'5K?%I_[M(-1+R<:, ME\\'JF*15+UA)\2WL9]WV#,?*:X.8+>**+90XZ%<KAU&0L\7IH,8'4J+HW$R M#9,"C$*_@'$GET\=U7%J1VF>=W=?'+C5M,%/</DXT^,W'N?U&"^=<A9HC\TT MP5!C\7:THX0_>S+N;VE`EG(6W*D-%*/G`^A%PN,!<>QFM+Y6["=C_$RN3%I^ M_!5E*#!IZ:"416'<_/&J^Z.@'00S4P6C%>H'(U,-<'X(5EH).J.$)I\QVZ=D M#W,^@7(GDUXA0R-=7CX+@QR[!V;%92G>I!9*Z>R'6-%Q-$(F`3.=!Q,C14-) M!^EN,58CD`@+UV).9V:Z(F5AH+`\,O6U0F5%I7+3+-5RID=F@U8J-E0^JNWP MZ$[]M==E;TRE(52>9>Q05:>A6=B9:@%6<LGM1X](4?$<)H48\*A@D*:%7AJD MTQEL?<8+<":)#QJP$K@B&WGA@CZ0I87D051YC$"HU9O2,LXL/-/#3-&@AWX+ MCGLH:I$WROPQBM-TO8#*1?(D3:_Y@@=>HJPT'N;%+9D(:62%)H(SR?=H+*C% M8"0I;YDVQ"G9`Q5(II#-H)E`Z!&S!%(O=JQ=&]]YY<&S9^B^;$`0=&?Q/-]\ M0IY$/\6!M&S1^-DS3@+PIH63G++()"YW`<Y^,S_+0YC@\TM\&)=U#"XL/G[T MCC]>GA]Z/Q\?OCH^O\!JRBX&,W3=+A;XL"VS`NRH``DX$<*^\<3%@!#%2'SH MT:2KD\H#*S+$`;:@>DA%QK?!*BK@07/#&CP$6(PKN0(P&]CH6T`W:ED@&Y>/ M#A"'!XJ,_@Q>8$I">-VC%R]D)X`%7:L'O'@A#-2+%^I`:;(:_$>=GSZ\N0#X MZO3X[_3JY!2NE-^^)3=14@S3`*Z.%Y$(\9$R&+"NE2-<MII-9E3K%`!;M:%C MJ-:[LYN`AL/E[%1@B8&L=T/@X(=`0T$#CR0G8M#L_6?P2DOBSJLG:;@R/<%" MFV\:W0TI:0D#*-S?`KZ<T(]'X,;!!4"+)/KH&`Q<MIWAO:CH)FP=@?-Y@GY; MFYYFL)ZS6%(1'EL\4G\"%]=&S2;%B76Q@:VQ[A(@@`:';QPPP+U&#%"/7H>0 MTC"F`&7+1TMUV<#98PS@"UTI:28K7+F(;-CC/2RHKXUWR9#F-K8Z\NVL:(=) MX,]`AO:+R>5W43)*P?`F0E?D#&:"#L?%[)AF"T)HBM_](K>8G]U,_01\-T_H M+0P8>0$[!KZ;IGD1WP9Q".GD;T0B5WC/C5Q.?3A$\$^8M4C!=QAO71*(>N2? M'?(/.JFW,"\.H!>4]POL%FUN`I(X02>QLR"R(J"$]6H)S"TIP'$0NS0O/0#- M5#3L*Q[DZKX2'+!J2P%[7PT294.9`KFON%3HJY.*!GT58&SOK8AU5+4J9.YQ MA11ILJRF[+=03GO>4%6#_I>N:^^^X-ZH<D7$W'FK#&FOI*/L>5E,.]Y$38-> MHZ!C[R\.2:@ZSF;NH\1'&D0ERAZA`MH7.WN#EL/(:F\X"KNH`L9D;K;`15I! MV,LVPWO:9`MK(TN+DT"5S:7)@IA)$[6-0XTL,[:B3QPED<3':SFU2UB'S(GU MUJ%SI]@40;3:.E99N1M<GVX=0E*LTU3M$M:I\U8AD1";4>N]%7)RXPU>71(4 M>[BK6\(2,#^J-P1*HL0&,*%J,QBDY%83-;H-8+EB`D=5#?K/4T)[[\NL$54M M"YA[;I$@3145E'WFI;3'SBJ:1'B2]%9$>9H5X\`L,%NBO<Y-0SD7%2(_*6/1 MOUZT0;^$'-[>-S'11]6J0N8^5DB1!LMJROX*Y;3/#54UZ']-S\LJZWJK<))F MZ7T3>U4ITA";-?TH%V8,-G7]L4B44-/[QDL%I#JI:-#7<EUI[ZRP]D05*R+F M[EIE2&LE'66/RV+:Y29JFGBILH2N<%5UL8W=Q21N<5H7>>ISNE;!AQ4B<^0[ MJ6^V@AR'7;N=Z!8$7;8Q5NN24>;EJSLB)ZT185&Y/*P4:]J;7DUO>F55O;K> MB+Q"LWIZ;WIB;RK$FO9FIZ8W.V55.W6]$7F%9NWHO=D1>U,AUK0WNS6]V2VK MVJWKC<@K-&M7[\VNV)L*L4_@>[:YR+:G/S-M*'UH2S?"B6AULQG=\O,^RKDI M6;83S"R$D:6<[I)B4I[.LT`ZF]L>#P=1$J$GI.1D8.`G:1(%?MPW_)H$.3%: MS4*W4LDN+1ENXZ%"_<R8+"G1T='T*)E$@PAMT@Z"OF[#/)B$0WK^M\_O`^'( ME&9R9FAV0!V:JN9D.SHJV,FEHRSE(3ET?$.@`&%(=0%^P-Q`:G*6VOU(7EYD MW3XY"TKN>GTPRM*IZ6=#FAX%1=8TZRK1#&O<[3,DOD4OM0#4N23]BM]GF,_0 MV]UTXYT<<6VQ!S#DB]G23PG<68%;HW%C@86MO6&G*$<@87XR`Z`+>J"+?ON, M_!H9/AB8D+<R'G<>7UT]?MP9D]M?KYY\\EN_';;^L=W:]SYOH:.<4L'5T_[5 MDS8Z1WC5[6_^#O]Z?-5[_$<'A0?TN0ETF)ZBI1WXT!?PJ5)\M<&^4/E586'] MG<^&?H&>'A)!A:F:BOLFU56^6<IK1\90/GJYA:^&X2A'5^K'+LEG75&Z0DZ: M_3<(%U$![<DMBGNTZ$S2:=CY9QK&'?SV2G=__^7V7N\E=JGRAPU.STZ/N0RZ M$0K#11BP,++Y.[GX@S,+[@U%VE)GP";Z?/S)&^_B\O#R0_F#>5MZ:U\=OT8' MN_$[1U3H9UA\4%J3O#/-1B3(0F)SE6XE,+OKY1A[!'S=+_RY<]W3./$\_`%5 M61YOS3L'GWX%G[<ZG3%'=_7?\B_XM6_\.-?\0J!/AAD'"#Y)I,A#NDTU3';1 MIL0!_HW++)RA7R5L:S5#?,7XT'VW]X([R&]`N(.7T#>_@.TR+""H_Z54A2>` M__F?H^.SU[07W=X7K28LBWD`Z>E(T<#O8#XA:$_G!910.@>'`(#IC<0E45E# M?NSVAEI3S(,@JD/&TQB<35EZ)C)E>0<OUZ9L9LKM'=&4Y1V\7)NRD2GWNX(E MRYO][MJ.C>SX8E^P8WGS8G]MQT9VW!/GF_)F;SW;-+/C<W&R*6^>KZ>:9G;< M%6>:\F9W/<\TL^...,^4-SOK>:9AZB/.,^5-=SW/-)ROQ>F:S]9K(S8RXK9@ M1'Z]S8TX@,OQZYK5K?3W9)H.P;.%;?FN+'IQ;?PG[?EFI&U/@!_/YR7B:S2\ M<&0H$]^/?Q=F8VAONF'99O?J+J6?#-F/1[8WCI`BR/2_TCGLQ^V-_P\CUTD0 $-UD!```` ` end ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-13 8:48 ` Joel Sherrill @ 1998-07-13 21:58 ` Jeffrey A Law 1998-07-14 9:12 ` Joel Sherrill 0 siblings, 1 reply; 13+ messages in thread From: Jeffrey A Law @ 1998-07-13 21:58 UTC (permalink / raw) To: Joel Sherrill; +Cc: egcs In message < Pine.BSF.3.96.980713072427.278A-100000@vespucci.advicom.net >you w: > > You're working from a single source tree right, with some recent > > version of gas? If so, I would have expected both of those to be > > defined to "1". > > Yes I nearly always do single tree builds. I am working with binutils > 2.9.1. Depending on what I am doing, I have been switching between newlib > 1.8.0 and 1.8.1. OK. > Below my signature. :) It is just at the limits of what I would be > willing to send to the list. The list easily handled that attachment. 17kbytes easily fits under the 40kbyte limit :-) It looks like the configure script doesn't think you're in a single source tree build environment: + echo -n checking assembler alignment features... checking assembler alignment features... + echo configure:5147: checking assembl er alignment features + gcc_cv_as= + gcc_cv_as_alignment_features= + [ -x as ] + [ -f ../src/gcc/../gas/configure.in ] + [ xi686-pc-linux-gnu = xi386-pc-rtems ] + [ x != x ] + echo If you look at gcc/configure.in: if [[ -x as$host_exeext ]]; then # Build using assembler in the current directory. gcc_cv_as=./as$host_exeext elif [[ -f $srcdir/../gas/configure.in ]]; then [ ... parse gas source files for version info ... ] elif [[ x$host = x$target ]]; then # Native build. gcc_cv_as=as$host_exeext fi If you're in the gcc object directory, does "../src/gcc/../gas/configure.in" exist? jeff ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-13 21:58 ` Jeffrey A Law @ 1998-07-14 9:12 ` Joel Sherrill 1998-07-14 9:12 ` Jeffrey A Law 0 siblings, 1 reply; 13+ messages in thread From: Joel Sherrill @ 1998-07-14 9:12 UTC (permalink / raw) To: law; +Cc: egcs On Mon, 13 Jul 1998, Jeffrey A Law wrote: > > It looks like the configure script doesn't think you're in a single > source tree build environment: > > > + echo -n checking assembler alignment features... > checking assembler alignment features... + echo configure:5147: checking assembl > er alignment features > + gcc_cv_as= > + gcc_cv_as_alignment_features= > + [ -x as ] > + [ -f ../src/gcc/../gas/configure.in ] > + [ xi686-pc-linux-gnu = xi386-pc-rtems ] > + [ x != x ] > + echo > > If you look at gcc/configure.in: > > if [[ -x as$host_exeext ]]; then > # Build using assembler in the current directory. > gcc_cv_as=./as$host_exeext > elif [[ -f $srcdir/../gas/configure.in ]]; then > > [ ... parse gas source files for version info ... ] > > elif [[ x$host = x$target ]]; then > # Native build. > gcc_cv_as=as$host_exeext > fi > > > If you're in the gcc object directory, does "../src/gcc/../gas/configure.in" > exist? Stupid me. I thought you asked for the output of "sh -x ../src/gcc/configure". Did you want the output of "sh -x ../src/configure"? ../src/gas does exist and ../src/gas/configure.in is there. The new version is below my signature. Sorry for the misunderstanding. --joel begin 644 j.log.gz M'XL(")=DJS4``VHN;&]G`.U=ZY/;-I+_'-?]$4C6J77B4/38/F\R6_K@C)VL M:Q,[%3MUOO)#1U&01`\?6I*:T3C._W[=`$@`)$!2,](,/<-4;(M`X]7=^/6# M('F79$OB;,AHY&:I[_I)/`\6ZY02Q\F]=$'S<?#@^T=.FM,H@[+3(%\ZBWCM M>-I5.(.K$YI.DPQ;KE(Z#S9C-X]6[H=U?'SK+J&;59+FY+?'K_X%5RF-DA,Z M3B/XO?32V20,XN-Q&,-E=A9-DS#PBR+B9%#ZJW<,789T7/Q0RB9!7!:/`NP# M)KZ.:)QG8[B8KH-P-O'"P&.7ON<OZ83UQ1<[8B5:S219Y4$2,W)&,PM2UAC^ MY57LBFZH/Q%KU2]E^[F7>R'[$29>'L2+R2H)XGP\HW-O'>90L8!YR:MEDN5B MLL]?_.O%RU=%652L=IYZ"^P0.1C,_:47+RA>QTE*_76:B8&3?$G3B3+;E><? M>PM:[ZA6D:Y#FLEJ(<QUEKIAXGLA*TL6L1?1L?B=>I'""+U$\J(HS];S"B4O MJ5/FJ1=G\R2-)M71]!K9,J4@(^KGXT++@.7X.PMR6OQ;9P$KE9W`3H!>Q*\\ M#18+RJ_6TT(3^.8H)?7J\>\_/WTERVLCK&.0,5+^\?S)TY]>0@EL%R:K0W(P MNO_HWNC^Z(#<AO+-P8&B#],@QJG<_E/1KK_<*5/SS%R9\=HPF&*Q@4#4H#Z# M=G*"LC%L1\JV88:JKU?2'!LQDEF6>SG5J_T$]S/3$4/MB9?R69EG!'5![(?K M6:69*$2-#F<*!=-'61G$\Z3:<)[@-O%BO1P*RGT]R98T#,?(3U@Y%#]_,7GZ MY-FK\:MED!$4(#D%I%O0F*:X(.*M\R2"?0Q+#,_(](R4@#DBY$D"FS`G,+U\ MI&Z2*K9"W1OBQ`27<.`R:'5/D_38S9,DS-PI>7?K+C0_G0'A;__S9&RC@^I# MY`O76P-@,V$%<]2C!+1XTD0)^.4O$Q/L8UT&:W<HR=SW;]Z/WWT[=ET^,-#J MXTGH-7>E;QRM1EN+8FBLJ]!IFD<F57(Q^3.JKETCX:O.#M\[SN'A/[/#\>C; MV^R'<S@Y7$`72`W=C/'?";2:L([IB1<2I:@8HE94M&<`79N?F1OAK)T;C&8; M;I!JXV;>(,GVO&$=Z[P)9S7>%$4-O*G-5N.4<$*L7)+UY^<04;M1#8XHU8;1 M9F=PC,S3K!.6<C!5-6U/=;!=K-GLWUF+FM:.O)FFU)/+JT.ET#19=%O\'"W6 M-,MPH>P'&"P=:'D]=B#@G1BK58\K>`2L6/D.N)[K#2Z<.ZXIJ5600Z)A%YO\ MD9@BN!P$7!/B&=KA:*-;W2E5F3D.EM5G278M3&:=B),89C4F8#%7W$)M+3'P MG]S2]L)%16!0LEVWZ`([P=SA3K!;=8I%'SK5+9L^P.C@X,4/T4:E:Z3+D[6_ M%+,="=94VNI]J[3%;W!4F6<A^DPCXLR;Z(#WJ>)5!#'RFI=6>2(JVSAVJ+#L M\%"ZM[P![WQ>90;X;^N,#:U&.;?O\!_?8.>+E*[(^[^1%4W?,LT\-,VP1LDU MU4)+7OWZVY-GOS-ME%$C+T0F1BL6N3%E]5\\GQ\\^,?#>XR[WDKPM@P%81<0 MG7`$'FJU*%_DU:)E5BM:)=D_839!3@[(/?ASGQS\]ZT2=UV-"^YWMV>6U0GZ M@^\J+?1>!(<:^BD9"JU;&%H?LNA>#@J]=!E5[TIK9&LR,D@`-8*!+GC]@+EQ M'I(H`G\Z\3$Z@-@DS<_`>/G)C&9D.I^!B?5F@$`40^4EF4U)[H<D/\9_7I.` M700;;+M8!]CY&P(P!6X$WQQL*.8QCZ=GGN]#)$XW$%=E28S1U3H/PHP`)B[0 MT8?J+(C(`@;!$`YBXQP@8)4"GF8TG@%8D@7X]7.DR"GH28[-("Y"504O@,SH M!P]Q<HI3C1ZR@`%Y(B('Z#+(5A!S<!'.@OF<I'Y&_),,N,<B#CXA%ICPGWD0 M49+33<XO3UFC.81^A$8>M&5_'_Q`UA`)(=,0H<,$'6VR^!BL(#2:@?D`+K+* ME(;4`^!'8?(.@6L0YX!JA,1;80X$6M`<^'%ZS(81$XJ]DV#AY6"M@-/(3PB+ M<IP6,EEX]4RB_+<C92D+%F&29<5U3$^A2*D-$N4BW2@763[SRU%81W?O*L-R MZ8I:NO&B54C+818@KGEY`<N<8\L8@K@3B/GC\&Q<EY$0A\Y?*1S&?,8?P0(N M3<9MSGS!<R%KT`,4LI```V5%O"`G*5VFXJ4DN:RYQFG+L<B,J0I3/:ZR4F:@ MDQE-3S0^%()$?O@I2(:SHY.X_+-%!!M(7(G="AT)8[3C74V&G;NOG:LD.`>A M?29"$YOLDH"6;`6L`I(5M>KE-)7$;C4^8)4L<8>:-:,G-$Q6&($5F7(D\58K MD0INBB=,`65*LW5HB.)*1]Y8PV.?]V_OO'GOO/OV[3>.^FL$_]QVWQZXY>T. M?[5F(UR\T_NRTQ/8DDDZ7OD7[_6![#7)QBI[6*$Q$E=OY!@'WI4<1*RV$W$P M[W/'TF!][EH8K-.*+,SI!I-;#R$3][R=2B3`?7`H_TB(8TISC`UEK,VSGUZ. MR1>WV"(\<-6">59<BZI#_#U/UO&,;4-F(&`<=YE$U/V0T-!=@)OG/!@=W/?< M57)*4QB%I]&G/##E3>9=F[A@L)I&XDZERUH[/WQ_[]&]']I&LC0I1N*K$UG2 M,E6FL(9Q%F,=8"Y+VGA*,,\9.??"C,,:NW$SCA/><!,GP/U-&2CQ\#E:.GC/ M2O0-/;YKV5IJ&JS84P^X1,N<O[:?],HM]E)A6G`W/5!WTWEZO*_T:-A+Y^GR M@=(E["3]CD>-*;4]E"_8'LJ.`VE:P-W!5,V"WX\`%[[(DJN7'J<-L@GWXB'& M7H&/D8Z%G$V;;J--APNY'-G@1MV\B*C.3K$-A83YS>#*?;(WY$N$0"4-RS@; M'0,IT4F+3>$GJ[-)*7`0%_D2Q%/@9O/5F&UB];+<S>):2!8X,8^3E-^YX7<< MD.0>]G>/T\2)=M:A4E!UVL00.)P^B4I)G.39>K4:2Z]UQ'Z6=RQ$OZ[+(`?& MXK=,>6\CG-^HZ%NY$GT5>MJE2X46^BHU7`[`>APBU\\B"")E6EFN5JK%(,3/ M1HC*MI5+=HE;24U<%XE>7T%JMZ@*22KG"=^UTY3WLQK@N7?)A&8D*F3>U4`) M6L$!IBU5#@Q;H==;H:(/;)6*91JDUWOI54T26ZK!)%T'45Y/"=;L##*KS1;I M-!5;9$3BOMNB"O9PL7:Q1"4EK%XH0\T*#=K?2^U75$`L1#4^@]!Z*S35ZHC5 MF&S.M97@9RPZ_70>DUV3L:E2**;&`K9]-C0UE&$RZ6)E"D)8-Y=FW<8,VMXS M;5<$S^>D69=!7#T4EVI8^,2,=F60G2*[JY>:9C'8G)I,2H5`L2AF9.VS0:GB MBA!(9XO"2(N5@R`-5F70]?[H>E7R,!W=I@S"ZI>P:O8$YF2V*(/DN.2N6F)U M4W'P0ZLU44FJ]L2`JKVW*!JNE`+L8E548N"`%+[)L@PZWP.=5V0OIUVQ*H.@ M>B(HU9[(N5LLRK65VN<A*\U,E,)JLB4&(L6:V+&TS_;$A"G(QF[&A-&QM8-$ MC29D4/*K4W)-S#";JM489'.ULM&M!4S)9BANK*"N7D85`Q#/F@V$6J_9!@,^ M]MLL:'B!C.MB$00=K)BQVFP1!FV^&FU6Q,N:ULS!()BK$XQJ"UA[JRT8I+0; M*6V[<U2@1PDU&0*]7C$$1ECLLR&H(,5">6Z[S1;(Y_+?E/RT6(1!IR]?IU4A MJ\\P#(+I@6`T<R"J[19AD-(E2,EJ"[AX&LU!E42U"!9D[+51J.$%EG<R"IP. MUXT]V<S!H-"7J-"J8/%O@Q48Y'')\M#P'V?<`/[72#B]EXL.ZR"81MC7ZE7, M-V%?KP%?QP5D=2>TYW2X8A2.%>T'#;XD#59%BH.9H'X0QB4*0\-Y'+$)YP?) M,,GL?X=H(`Y2:01YK5X%>1/D]1KD=41@#.^"\@4AK)D+R8[S@P9?@@8K(N5# M&E%^$,4EB4*%>#YN(\;?:+E<TN90\9N)I`G@*P0*PIO1KL\07\4#SNLN(%]2 MPKJ%A!I@?E#B_2JQ(E(QDAGC!SGL7PXJOHOAF@'^Q@MEK[M"A6XNCB9PKU(H MZ&Y!N3[#>PT+N)@ZX7M!B2OGPFW"]T&']Z7#JCCY!"W0/HA@GR+04)W/L@75 MKX,\>B@(':Z9)!H!O4*A`KH9UGH-Z%4$B!YV`7-&!2L&B3:"^*"RNU=917HP M.QMV#YS?#^=5V(8IMD'V9R^&/LI`P^/H81-:J[4*4AMPJ\\HK>WSM-L+@]+B M=4&I^65!@Y+N44D5V:6U]_X,G-\SYU6,3JVO\+EV8NB3"#003IO?QY-:WL9C M`JX^H[2^TSF#.R%U08EKYF)IP>M!7W>JKZH,^3!VP!Y8OW/6:W#-QVI'[!LI MAWWIOH;&;,!&O*Y0J)!MAJ]>HW9UQP-[NZ`V)X,U(UT;7@_:NB-M502''3?@ M],#R';)<A6C\U0&?;S#_=ZSN*O8"\YN@6:M6<-F$47T&97UO2R%T`F:5&M<N M1=@*TX/2[D)I54'*J31A]<#W7?%=0VHYGRZ`?3V$<'4:KP%QR?I&N#90J:AM M1ZY>@[=ISP-M%_#F9+!V%%0[7`\J>WZ5522&0S3"\\#GB_%9164<IQ,<WP2F M[TVQ59@%CC>AL%:MP*\)@OJ,N_HN+EG>"7858EQY*:X.$#RHZ3G55!5=.7`S M#`^\O@"O-1`N1^\&Q=>(\9>FVAK&%OQN!.(ZD0K'5E#J-2@;=C;J1Q=4%G3L MK5X@PBY8/.CI=GJJO8@,AF^!WX&]V[-7?_$@S*$CXF[%ZX'-E=<#9LOFUP>J M]=KK`PU`TV=\K>S:@M%=X%6AA967(NH$LX-R=E=.15KE4&TX._!W._ZJ(%N. MUQ5HKQ.S]ZG#*H(63&Y"V3J-@K16O.DSVAKV+V-[%[@M"&'M7%3=@'90SG;E M5"3$!VJ%UX&KW;BJXBH?K3.H7@\6[U5E5;!DW&U"TPJ!`J5F..DSCE9W*1-- MIY2`($17G8FS(X@.RMBHC&I`P2;6#J`#1ULYJD7^;';=P;-_[.T18_58'CE; M!4ZANMXZ3["&_6`K$U^@US^Z+;_1Q3[+PE[)OQ"O8&:[@KVYC;_;1[P"0CPX M'#UDCSV(0[0H;O40C)<J^4\6J9<.)$=`KA4:8EI8Q9C*>,RE(OD%S,]H>J)# M;<%$P[XF>;JF31#:9\-112>U32?[(0CY[4TY7%<S,FS+QGU9WHB5G.W`[#XK M7'4MO9YSY9B%)!1VAY=-5/-SU>LHV:V_USEI]H4K!(4O7'B3J-:=T$`0(A2R MK3#`P`YA@'?;P9,<N-G$3<V+9'UOX45>+];N4$4U-$&N-L*-3J#>+S+#1B]0 MM6$K(B.[`*2@@X4RUG>&QT'M;'K'Y<%Z[(*,`R,MC%11D76[#2A>+Z[N2#-5 MP$..-@&B7J_@H1DF^@:'E>W'&=@%#TM*6*I@>W=,'+3.I'9<(J*W3I`X\-'` M1Q4/19=;(>+U8NJ%M5(%.\[.)CBL4BB`:$.)OD%B;0,B"[M`HJ!C[_.ES>\L M'U2N4>>*5PQ3Z\O&!P8V,5!_3SAM?4OXM>;FA311?X$W;7G!-[6]WML$!WW# MO<IV0TYV03U!AYEMY/TVJ#?HF50TD6/';CM"WL"]DGM:MA_[WA+O/F-6[E(' MM2=P@(V-3^AH]>K#.484Z!O853;:M.-S.-/R.9QIY^=P!B73M8P+8-KE&9N! M=1KK5)B;;O/\S&?+Q]UKGXIATY9G8_1Z!>/,F[]O&%?98LCX3G<Z.!VF,%%4 MVV'<#=<P-;.*L^@,<`/?]/L8.)6MT:T/3+Q"O=-N2P`#&V];:/7J;0OCGN\; MM%4VE^17%X#3J/'E2I+;6X+=#58X]2U/LG%WO+OAK-->SB9[V![RK@T?M]$[ M[<UI)?<:WZ]FH%+?K]8``7W#/N-V$T>?.QWU*TGQU(XX,KTM\-TXM5./$`F> MM7"P;WJC3+MR9!PI.VF.(%1.,;-!!N7IKCR&T[[-O.R;&M5/6O=MHJ:SWZS2 M?O;[RB9O>(8'9MIX`E,GJ!SX%AK993=+4NB_T.1A*W??RJ%\LFA@5P.[U/U8 MM#N'HWMM>->%9]J6%TQK0H4:B>+<VO?VE:%>XRZJ3*(CEA6TTJ"6J]@:U&Z. MJM4->\FUKKSL@Q(9YMZ3"1J<D7+<!G_$.NG]<+$")6QZ+7!3H5'PQHF;N+[[ M!?!QDWQ)@74F&-GK!)K@Z8V"';!QY(7@E)B*J4KRFA,U2:-*4<I"\.2,S9), M`;*.1=N/!`K+GCX2XGA";@,RBO\4K_J:++I)5=.(.'.V4/=7&'4N'@?EQ6+I MAIJ2&88ZP1Y##3#,4%JPT%`UFQH*@;.FTF,SZ6M#<6#I(MB8EPH"-*T&16HH M1R&;R%'LQG*N"*:A3>P"!3"5&J<""F6B-;(5E<Y0S-30U#573'/WJ*HF!IOG M#NIL*F4*;E(*KO*F&GP_D$G!V+8PU-@87VX=K:Z"F)=LZ?ICWL0F>O#](R?- M:92Y36B@D`E[U4C#)MY*DIHVF$["%]E*MFBC*1A2U828%&9T0\;PI[A`^PJ& M?1,G0^AA_D])37M%N.',E!?3<L:=!OER`L--O-*3P:)DE0=)#+ZRX^"E`Q0. M-%&N8)%:W2"EBTDIG-6$!$6ZC,+9Q62DUQ42,TKH$F&W%FB*,:KL$,62);Q@ MERPIKGC/@D'`FS'7Y7>*'<^=>>HM-)B"7U\J@4.4G%`GF#O^THL7++`@F(N! M&'1\^P[=4'^R2@'K-M^X$@A9)\$CN%SYP+)XO<&9H8@DC1@*)F7]M4J31>I% M8H"Q;.MPLB_+%DI565JTSE,OSN9)&DU8&@AMU'?OOU-:?$=NJ?8Z)05ZB\YW M5I%1V''K*#H3F]@Y0V9&JS&[A-_/?GHY)E_<0E+OA$Z">28N1<4ATN,^A@'< M91)1]T-"0W<1>[GS8'1PWW-7R2E-@>G<'@%*E"WF75NXQ6QL(\&?X(2ZK+GS MP_?W'MW[H64D2XOZ2.LL=0$MO;#:H591;U>AMO9MZ%6E??+TI\=__/)J\K^/ MCX[&BHQ$5*S(AW<1$P.1E#+BM9"P^-D/`1?SVKM\JP-U%&^UF4&ZIIXMPA6D MA6Q_>?JZD(9=K!4"&YC5"N7V?]<;:8-K<"G"YN/`QN$_F`T^28(9F=_YYL^_ MF'D$)\59$,=G]W2P_Y$Z-6S]TR^/?WXY1J(7]_'Z]>M*";=;LKW\F1@E6LX' MNAJ#(>\T"'A'29I#6^7WZ]?*!:/7*HL2;I:X(T)^?O+CY-6_Q^`!.NC0L7^/ MV3]!>0U.'O[+';W2>1FQK&\14WUZ.W(_?5KPWV_>N^^^=3^!>?X$AAN\S)-L M/45S#!?H^H'1QBMNOMF,1BY+R;O2NL]X@E[<6P/]/<:LJ$@8BB3A*,N]?%W8 M:>D<2-=@Y([`L0SB("^JYK*JL'PBT2@$IY2#@N(,5N8F-4+>7@96)#JI$*F5 MEM&@36F1^S""[^7EWXI#H^P(?G)KLYD$L1^N9W0"L@7_Z/:?W"GZRQ7E[H+I MM@2?^ORB^[>D2AV^?_G'CT^>_?[R#?GBW;?CT;>W#T4!Z7";]>;$-H>"6\]? M/*\Q3):1<>W^TJ%-_":5T<54)RF!X#T7>SF'3_P:QG?!S7`_K./C3X)2\<TE MN5*(6G1'^.Y%&V`]Z)<DY]=,WY26?R'>%TVR:IO,UBA36@&7L$YK*,OJ;45= MT7SFY9[65A1H.R-;>BDMIWF6(:SI,RW+M':@0V4K[&*&0$CUEEJYUMI/HG*1 MZ-'4&VO%6ML3+U485&6.C3%%$X$$6C-99@*-HB6&<X;&6C&J&+I4E:9!/$\J M([*"RG#SI&@0>;JZ\&N-'(H8M?O^Z(@3NG_>^N*++P[#)%D=X"_W[=O;+GF. M/S/X_3;&;"-<Y*0DR;XN6\,P7Q\=P1"`)%]CW5^B]]>O:]W?;^_^?M%]T9SU M__HU#``.AC8`\PIJ8SQH'^-!,8;2`QN&7<-(W%>IK,8\W,/VX1[*)54'%"6& M(4&8+__U])=?WGQ!A"S9)2H*^H/9LMQ%J;[1^370<<O/R=S_<EV!M7K<+_%6 M+R=J-L$YK+3-UG-C6UX.;:L-]#1!O:%>C^PP)!(.Q8I%AD0N610PS+4D33Z) M":E!:,G:0[44>BGBSL-*(XANZFV@$)J@A348)>D0<&]5-N?7T+*[_WI8<9\4 M;Z?J/VT54UDLYSH+XL6X=)H+ESES`5-<5@EN--Y!+PC+%KS!$?@H@,+DJZ+? MK\"Q83!WX/(`ZC1)CUT4'L12M[8DOPM.-K/*_HOG\X,'_WAX;[1*LG*VX$*! M.P,=W/F&_`D.2KY.8W+OGT2&2DD9W(B]I\5-R,)[()U[Y2WZ3*%/U,L1J!RG M.I2YOY*VVBG+%!:)PO8C,OL^$J/?3S(>A)%S$I/AL^##RW'%@-61V`(=9YED M^;BN?E##QU3RCRW)UQ.:3A-P-AU'9"Y+WTQ?F>/$24K]=9H%22S0#PI]?+?4 M&\_YZ,!&?/,>,416+A-;S71MJ\F]:DW!2?B?,?`"ZRGND*C)Y;)KT9.?@D-L M9?"%AY=W:Y2!:>Q-0^I$ZQ`<?5")2YB*,CH?0%68Z3H(9X8QKV2F$O1?/?[] MYZ>O)D<OGO_T[&<]O*E5\<CPW)N-VRIP,EB'$^C]CU^?/G^E.AN5&K2R?6;E MUV)%@E,\&)3+T8HU=^5KQ1+6TP)MIA-T;!W1.)>*ME_4(AI0\902$6<\.7K^ M[4OA\MWZ&WFU##+VC1!RBL$[C6G*K";_J$@>0/`3GD'43^19-$*>)&!V<@*! M1CXJ^@!TAS@^2<]81R4U]`3])V&8G&:'MT3R2)Y\L[)D?QPA,&-,XRRC!"9W M=R-3:+!#:FFUJ><?,\X)EEENM*E]5'-RVDVFX42>^I](1,[D"]=@Y=7"@A/5 M<NV$):$G7BC\1*%=X#M*[HU&H]*7LQ+86Y:)V,JHT3'&"4HIY@/9-VC(;R]^ M`R`9-SB<_HRH[4!U9#:XND;T_5DEO]T,6-)(R[R2">[K2=F`E3E8AHV$BOK\ MI;]E.KC:EWY*M0-9F4&F/@9CROQ*DH*='XFA4@I3V7$&W)#;?2L$,6"#G9&[ MN:5/FEE_]X8L]/%J!:""6\NN/RZO$A?1TME\_V@5^"1/R`97[T3'[`3$+T%\ MC*$=`P;/0?K1\BLD^\K4N2`#(Q`!V6C+T%!A$PM(R5?J7+Z2.Q[V<\-N5Z&K M@'([<`D*&VPIU;96$K+4T0K`$F5;PI5L90(K6=L&59+RHD!5'$G6\:,./C4Z M$PB9.[.`49UXKWNU$.)50=+U7:Z/:("[AUV26O62^L=8C6LDV5F&_GU^MJ*P MR^H),$G.5UYK\(`WX">O2F(6)&W1^3Q)B4=^?/D$/.T(7+8``BG`,'`XPQ"; MEN<I1!EQ?-GX=$GQ,1(Q*(U/8*O&$?_R'\F\F`V.)]QJ+9B'F-$\([?__/7Q MOY_^5:/$B2%NX&_/9S=/D&:>K..9A4I\Q[`#&0[?@6P)SC%-6PBQ+[S382'S M6'LOU4M3+P9UPAK^RU9[AZG.[!LC&;C<2(,''6H,AK_($9,I:&I*[A2',%[< M)]^PJ6=6V30V!<%ZA`?6!05V%"?U?DXI+)L*4_?S\S_(D75('`+B"[H"A7`6 M1ET`!5MC_@(BR)^/CC35#!66!W,V?SS;@'-7:-C<<1KAS#@`[`%'V0-QI(T1 M0[#^8WWB88P)5S,_A8@(-T?H4X`IF:U]2GY[QA;@S.&'-G4DAS*(L[P%K[;T M+6@Q+@Q\02XNR@:BX**\4=7"V#1;K_`X#.QX=GN4I82\-*#U60-[\;X?8X67 M`M[K["7).E^M\UJS97**3:#W&?LL*!_@#"/,);X2G7,6;]>P(8,HHK,`_#)= M%,J<%9%`R)EX4##]@-$HPCKGG;)?9V>Q%P5^L7@(U%//SVD:9,!=1OT+XBKR M+DLT;H?B`>;N'"J9G11(;FAAVFRR`=<"^Q#("U@N6$FL&F'J3EHN,6-C_SS+ MQFY>Y/"'IDX&(7PPA]%P=7AVF20R?56;*@Y\=+8X#>(']U5C8:+[%7Z<MI/A M/;5USJ;%[_"9B`1,EE#Z>>%E.>V.P&FF%ULH7<=BNN`ZP9[Q:98EJ3`BQ'FJ M,R[+,188+8TJQ"LS:^T,+5A9N5[-&EVC0O^J&:^RHLR#2B>+$R[/$S9AYLL> M,D&M+5P2529J&285O1<A$EQO&1[Q%J;0B->TA46<ZJ(A$3Z+V18.:32F4*C> MB24,T@GW&A.@@*XJ_+E^RT0#^AE&/8-9X'SX[<7+9Z^#C^!D/'MY9+*?3>%A MV>UEQHGVM5R?@+%<HSUR;(P-.Y+5HZJZ1,\57MEE9(RSZJ-V"[CLPPR1UQ!Y M#9%7>^15[J".(9B5WAB+6:D'Z]LA*%.Y8XC.9C,Z;XS.>*4=([48KHE,!G-V M*OQNCF4VZQAV[,Q2.??C/+0MXRQSV5$8>[5EV%(/6#5![)/4L)/.R#3)EV2* MW@P_Z]XP.6-FC^8K;T$S\)S,<Z-Y@*.EMID7GD=]S%FRHK%U12`T^)]$:W"G M8?HSZH<(5#8%%F<>NI(#'&U%/T\I[4P,/`,T:26OJDR#D=>%T.X8@A5<&9D> M>;.3(*.FJ42P)W.P47O,9<S4-RB5I1"_.0#9H^5NDA[E49_J^9?9M%:$IW]J M9<<FLM?ULS?&QL'&=.X&CQ95B_E1HVHI.WI4(V5'D>JEXFA20XI'D%CS/$J] MM9V2\5%'+-,^HG#;W(]L9DP`R>K6+)`DO7`JJ'@#56L^J$9H3`J9N[-EANK4 M^\V;%-*\LAS1-5[P9YHM&I(@EYH$V>X.^(V.(H8TSI#&&=(X6Z5Q6EKL-H\S MX)3D`_/7D:1\@9(>^8*/SPP"OH='JSD[.TV]%1ZN=<)Y/2`_?R8%HPJ^:_C# M*VF2L/V#,SD[JZ_V["RGFYSS=)7`UC$$^-<[<]?1-%]!!JI;SD#)-S4,J"6> MFNE.O2`?+4'Q/*87['[:Z$#Q%8T`4GI,[$BY)<$E*HT9I&EZ;$ZV8=;)#%I8 M,\EQ%S4DZR012YB!>VP[Y+%NR;W-5R#<?-XY/=20V3)J8]D.6+&+')0Z2,\. MK(1-YU5"ZW&5L'9:):P>5@GULRKAMD=50MM)E;#+095P%^=4PO9C*F'+*95: M%Y941'AIAS>Z1=Q[23]<MT4.*8<AY3"D'(:4PY!R&%(.0\KAAN%4SZ+G,@-2 M4C2G0DJR+CF171\SL25'R@9;9DF:I;JC=$EO$P]%Q&ZGP%>?Q&4N809KC&E& M(`8SXP%[##[E"B"089=AM?5HQ_F"\<96GV=4+CY$8@G+H=86EXLJ$[6,S(O> MB]!\X6U[E("W,`7GO*8M.N=4%PW/\8M.;?&Y1F,*T.N=6")TG7"OT>O"N[HC M`M=OF4.4/D3I0Y0^1.E#E#Y$Z4.4?L-P:@B+]QT6]RP/TC5*[Q)^1S1*TK,N M[RFX<`B?S\"?M(QT`NB56M^(0-,T3IJ>8['<:"_4@.]0YDJ)/>ME&8VFH>4) M$]/Y`OO"Y$$#.TT0X],#S`ZP7U4&(HJ;E]>:^"@G"TM*\?WHL$(K)WARP&-V M!K922O^S#A#)A;3A?QN*-;7DS\F<IR7F2<[3KF#+MNVX)O&&E_8L2O')IQTE M3L0#'I;$"3.*YL0)KS)1*XD3T7N9..&?0MLF<<):&!,GK*8U<<*H+IPX\:NO M,S4D3OR6]Z'6.[$E3OQ+>UTH,ZA7E3BY=LO\3!,G@^M[[D1.Y)TRRX'_[LT_ M5B+R9D:'+>_`.TE"L!B68Y`=\SE=XX.+9^,N]E#VX^<OGT$;GNF20>\.'DUN MR/$$49`WO(BK?$J\[6[8%3TN?L&CNET]=V_:X'UW/>O;9=9(E](L6:=^TX/K M*_#OHI8'VVU2Y4>.K4UE=0/_E_@\,*>J!F<KM=(<C:Q6P'C0<>!K/,O85N'J M$<SQ`P/X\8?$')A`#*O$.H:X,$_6YD?NIQGU4M\:YH%?;!D2(G6(8LU5QF?M MV6A^LCHSUWRDAO"$MXG,CY<'P*N-&0#M5;`F?VEY?T">6NN.@]#ZRH*4@86Y MR\9:$*>E5ZCYCU&2\A4'#3%EYF5^$-BFBWL@F<\\LQQ.^/GR1@]`'$&?KV.? MYTE$QI!\71?4);TRP=_C&Q:8TG:G1D7>HN]HU9F8:75W%FY'WO$]$@4YZF[W MAQ"V>9C`FZ(J;3&/]H<AQ-:99/B!YBS7,P$Q@>+8`YM(DOIK5?Y@+NK_F6(= M]L%!]M?(_SOZ-R)_"1Y0G(TZMHQF?\>/\$2PF=D78VCFIP'/]S/[V=X-"QM& M2]:-"#"*WEC.IVL_F\AA,^(]L<C&U$_)U#)51KP0&,ANKLZIET,(R/PS\XC) M](/O@BETL!+Z\]EH+]@-C>"$.D?D]W6,$"6,J1@5ORF1L9@A!E\28)6L5_(F M0C7LX#"HA54$]GP2U>.GT5[.OZP,V9ZYH0SOX+(8>;2\]2L%V<W(AL]M5%PS MV>1,-%-</[LCQ1<EOY7Q?XRM1?]_'YTG?X0?&JJ^]6-A>(T)BZNJA?S#1-72 MXD-%AF[9AXMJ+S0ICN>HA?AA(WM>"VIM>2U19:*6>:VB]R*O!==;YK5X"U-> MB]>TY;4XU47S6M!+:UY+HS'EM>J=6/):.N%>$SXHH*O*:UV_97;,:UTL[.^. MF.>`*?&-L]K[EL0WSVKE^`VT:F'Q3;1JN7S?D/:6I/*;:?+[N96/T0*7JD7Y ?(J\6+;-:$?N*+3#!6Y%[N-TV00X__A^6_LO0[X@!```` ` end ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-14 9:12 ` Joel Sherrill @ 1998-07-14 9:12 ` Jeffrey A Law 1998-07-14 11:29 ` Joel Sherrill 0 siblings, 1 reply; 13+ messages in thread From: Jeffrey A Law @ 1998-07-14 9:12 UTC (permalink / raw) To: Joel Sherrill; +Cc: egcs In message < Pine.BSF.3.96.980714072626.27184B-100000@vespucci.advicom.net >you write: > > > Stupid me. I thought you asked for the output of "sh -x > ../src/gcc/configure". Did you want the output of "sh -x > ../src/configure"? ?!? You sent me exactly what was needed the first time. > ../src/gas does exist and ../src/gas/configure.in is there. Weird. I recommend you put in some strategic echo's in gcc/configure to find out what's happening. You might do something like pwd echo $srcdir ls $srcdir Just before the code which checks for assembler features. The problem appears to be that gcc/configure did not find the assembler sources and thus can't determine what assembler version you've got. So we have to debug configure. Too bad there's no such thing as a sgdb :-) jeff ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-14 9:12 ` Jeffrey A Law @ 1998-07-14 11:29 ` Joel Sherrill 1998-07-14 12:50 ` Jeffrey A Law 0 siblings, 1 reply; 13+ messages in thread From: Joel Sherrill @ 1998-07-14 11:29 UTC (permalink / raw) To: law; +Cc: egcs On Tue, 14 Jul 1998, Jeffrey A Law wrote: > In message < Pine.BSF.3.96.980714072626.27184B-100000@vespucci.advicom.net >you write: > > > ?!? You sent me exactly what was needed the first time. <sigh> I must need some time off. :) > Just before the code which checks for assembler features. > The problem appears to be that gcc/configure did not find the assembler > sources and thus can't determine what assembler version you've got. So > we have to debug configure. Too bad there's no such thing as a sgdb :-) Did it and learned that you are right. gcc/configure is not finding the gas/configure.in because of the way it is following the symlinks. I have a tree symlinked like the one-tree script does. Here is enough of the link stuff to show what is happening. rm -rf src mkdir src cd src for f in gcc libio libstdc++ texinfo xiberty do ln -s ../${GCC}/${f} . done for f in bfd binutils gas gprof ld opcodes etc do ln -s ../${BINUTILS}/$f . done ln -s ../${NEWLIB}/newlib . So when you are in build/gcc: $ ls -l ../../src/gcc lrwxrwxrwx 1 joel users 20 Jul 14 10:51 ../../src/gcc -> ../egcs-19980628/gcc ls -l ../../src/gas lrwxrwxrwx 1 joel users 21 Jul 14 10:51 ../../src/gas -> ../binutils-2.9.1/gas But ... somehow the symlinks do not get followed as one would like. Watch this: $ pwd /usr1/rtems/work/tools/b/gcc $ cd ../../src/gcc/../gas $ pwd /usr1/rtems/work/tools/src/gas $ cd - $ pwd /usr1/rtems/work/tools/b/gcc $ ls -l ../../src/gcc/../gas ls: ../../src/gcc/../gas: No such file or directory I am not a symlink expert but it looks like it is not being followed as expected. --joel ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-14 11:29 ` Joel Sherrill @ 1998-07-14 12:50 ` Jeffrey A Law 1998-07-14 16:57 ` Joel Sherrill 0 siblings, 1 reply; 13+ messages in thread From: Jeffrey A Law @ 1998-07-14 12:50 UTC (permalink / raw) To: Joel Sherrill; +Cc: egcs In message < Pine.BSF.3.96.980714112126.10553H-100000@vespucci.advicom.net >you write: > Did it and learned that you are right. gcc/configure is not finding the > gas/configure.in because of the way it is following the symlinks. I have > a tree symlinked like the one-tree script does. Here is enough of the > link stuff to show what is happening. > > rm -rf src > mkdir src > cd src > for f in gcc libio libstdc++ texinfo xiberty > do > ln -s ../${GCC}/${f} . > done > for f in bfd binutils gas gprof ld opcodes etc > do > ln -s ../${BINUTILS}/$f . > done > ln -s ../${NEWLIB}/newlib . Ouch. This is not going to work if you use relative pathnames when configuring. I believe it will work if you use absolute pathnames. Consider carefully what happens with "src/gcc/../gas". You go into src, then into gcc, then up -- at this point you're in the parent of the *real* gcc directory. You are not in the directory with the symlinks. This is expected symlink behavior (and is one of my beef's with symlinks). > $ pwd > /usr1/rtems/work/tools/b/gcc > $ cd ../../src/gcc/../gas > $ pwd > /usr1/rtems/work/tools/src/gas > $ cd - > $ pwd > /usr1/rtems/work/tools/b/gcc > $ ls -l ../../src/gcc/../gas > ls: ../../src/gcc/../gas: No such file or directory > > I am not a symlink expert but it looks like it is not being followed as > expected. Presumably something is optimizing away "gcc/.." in the "cd" case above since if you actually take each step one by one it will not work. ie cd .. cd .. cd src cd gcc cd .. cd gas Ought to fail. What shell are you using? It sounds like it's being "overly helpful" and is confusing the issue in this case. I believe if you use an absolute pathname for configure that this will work. The other possibility would be to change how configure.in finds the assembler directory. When you enter the code in configure.in, srcdir looks like ../../src/gcc What would be the natural way to get to its parent? "..", then we descent down to the assembler via "gas". That's how we end up with ../../src/gcc/../gas We could instead use some kind of sed hack to strip off the last component of the pathname, then append "/gas". Presumably something like :/gcc$:/gas: ought to work reliably. jeff ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-14 12:50 ` Jeffrey A Law @ 1998-07-14 16:57 ` Joel Sherrill 1998-07-14 20:12 ` Jeffrey A Law 0 siblings, 1 reply; 13+ messages in thread From: Joel Sherrill @ 1998-07-14 16:57 UTC (permalink / raw) To: law; +Cc: egcs On Tue, 14 Jul 1998, Jeffrey A Law wrote: > Ouch. This is not going to work if you use relative pathnames when > configuring. I believe it will work if you use absolute pathnames. Sounds like something to mention in the crossgcc stuff. I think by default one-tree.sh uses relative paths. > Ought to fail. What shell are you using? It sounds like it's being > "overly helpful" and is confusing the issue in this case. bash. What else would a GNU true believer use? ;) > I believe if you use an absolute pathname for configure that this > will work. Hmmm... This might but I think I like the next solution better since it should let the existing one-tree scripts work. > The other possibility would be to change how configure.in finds the > assembler directory. > > When you enter the code in configure.in, srcdir looks like > > ../../src/gcc > > What would be the natural way to get to its parent? "..", then we > descent down to the assembler via "gas". That's how we end up with > ../../src/gcc/../gas Yes this is natural but broken for symlinks. > We could instead use some kind of sed hack to strip off the last > component of the pathname, then append "/gas". Presumably something > like :/gcc$:/gas: ought to work reliably. I just tried this one and .... got a bit further. It looks like the version string is actually in configure and the generated Makefile though for binutils 2.9.1. I did not fix this part since I do not know where the version info should be. Here is a piece of the output of "sh -x configure ..." which shows it missing the VERSION string: ++ sed -e s,gcc$,gas, + gcc_cv_as_gas_srcdir=../../src/gas + [ -x as ] + [ -f ../../src/gas/configure.in ] ++ grep ^VERSION=[0-9]*\.[0-9]* ../../src/gas/configure.in + gcc_cv_gas_version= + [ x != x ] ++ grep ^VERSION=[0-9]*\.[0-9]* ../../src/gas/Makefile.in + gcc_cv_gas_version= + [ x != x ] ++ expr : VERSION=\([0-9]*\) + gcc_cv_gas_major_version= ++ expr : VERSION=[0-9]*\.\([0-9]*\) + gcc_cv_gas_minor_version= + [ -eq 2 -a -ge 6 -o -gt 2 ] ../../src/gcc/configure: [: integer expression expected before -eq + [ -eq 2 -a -ge 8 -o -gt 2 ] ../../src/gcc/configure: [: integer expression expected before -eq + [ x != x ] + echo Below my signature is a patch which I think shows how I put the sed in configure.in. I think this will work once the code reliably is looking at the file which really has the version info in it. :) --joel *** ../../../original/egcs-19980628/gcc/configure.in Fri Jun 26 12:07:28 1998 --- configure.in Tue Jul 14 12:33:29 1998 *************** *** 3297,3308 **** AC_MSG_CHECKING(assembler alignment features) gcc_cv_as= gcc_cv_as_alignment_features= if [[ -x as$host_exeext ]]; then # Build using assembler in the current directory. gcc_cv_as=./as$host_exeext ! elif [[ -f $srcdir/../gas/configure.in ]]; then # Single tree build which includes gas. ! for f in $srcdir/../gas/configure.in $srcdir/../gas/Makefile.in do gcc_cv_gas_version=`grep '^VERSION=[[0-9]]*\.[[0-9]]*' $f` if [[ x$gcc_cv_gas_version != x ]]; then --- 3302,3314 ---- AC_MSG_CHECKING(assembler alignment features) gcc_cv_as= gcc_cv_as_alignment_features= + gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,gcc$,gas,'` if [[ -x as$host_exeext ]]; then # Build using assembler in the current directory. gcc_cv_as=./as$host_exeext ! elif [[ -f $gcc_cv_as_gas_srcdir/configure.in ]]; then # Single tree build which includes gas. ! for f in $gcc_cv_as_gas_srcdir/configure.in $gcc_cv_as_gas_srcdir/Makefile.in do gcc_cv_gas_version=`grep '^VERSION=[[0-9]]*\.[[0-9]]*' $f` if [[ x$gcc_cv_gas_version != x ]]; then ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: pre-egcs 1.1 status for *-rtems 1998-07-14 16:57 ` Joel Sherrill @ 1998-07-14 20:12 ` Jeffrey A Law 0 siblings, 0 replies; 13+ messages in thread From: Jeffrey A Law @ 1998-07-14 20:12 UTC (permalink / raw) To: Joel Sherrill; +Cc: egcs In message < Pine.BSF.3.96.980714120809.10553J-100000@vespucci.advicom.net >you write: > I just tried this one and .... got a bit further. It looks like the > version string is actually in configure and the generated Makefile though > for binutils 2.9.1. I did not fix this part since I do not know where the > version info should be. I fixed the code to look at "gas/configure" file a few days ago to fix the "where is the version # problem". This went in before the .palign and .balign detection. Pays to read those ChangeLogs to know what other changes you might need :-) So, just add $whateverthevariableways/configure to the list of files to search for a version # and you should be able to move on to your next problem. jeff ps. I also checked in your change to fix problems with symlink source trees. ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~1998-07-14 20:12 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <Pine.BSF.3.96.980710084804.8580W-100000@vespucci.advicom.net> 1998-07-10 11:00 ` pre-egcs 1.1 status for *-rtems Jeffrey A Law 1998-07-10 13:32 ` Joel Sherrill 1998-07-10 13:32 ` Jeffrey A Law 1998-07-11 7:07 ` Joel Sherrill 1998-07-13 0:06 ` Jeffrey A Law 1998-07-13 8:48 ` Joel Sherrill 1998-07-13 21:58 ` Jeffrey A Law 1998-07-14 9:12 ` Joel Sherrill 1998-07-14 9:12 ` Jeffrey A Law 1998-07-14 11:29 ` Joel Sherrill 1998-07-14 12:50 ` Jeffrey A Law 1998-07-14 16:57 ` Joel Sherrill 1998-07-14 20:12 ` Jeffrey A Law
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).