compiler error

compiler error

[Morris Muller]

	I'm getting the following error
		undefined reference to '__gxx_personality_v0'
	can someone tell me what this error means, please.

	I'm using Red Hat 8.0 and gcc version 3.2

thanks,
morris

Re: compiler error

[Phil Edwards]

On Mon, Mar 31, 2003 at 04:03:37PM -0500, Morris Muller wrote:
> 
> 
> 	I'm getting the following error
> 		undefined reference to '__gxx_personality_v0'
> 	can someone tell me what this error means, please.
> 
> 	I'm using Red Hat 8.0 and gcc version 3.2

Use the g++ command to link a C++ program, not gcc.

-- 
If ye love wealth greater than liberty, the tranquility of servitude greater
than the animating contest for freedom, go home and leave us in peace.  We seek
not your counsel, nor your arms.  Crouch down and lick the hand that feeds you;
and may posterity forget that ye were our countrymen.            - Samuel Adams

Compiler Error

[Richard Xu]

Hi,
We've downloaded the GCC 2.95.2 to compile a C file. It was
     compiled successfully with the old version of GCC compiler. But we got
     error messages while trying to compile it with GCC 2.95.2. Please tell
     us where the problem is. Or please provide us the user name and
     password to access the ftp://egcs.cygnus.com:/pub/egcs/releases .
     so that we can download an older version of GCC. Thank you very much.

     Richard
     847-948-4279

     >>gcc -I. -I /opt/sybase/1103/include -D_HPUX_SOURCE -c ueStProc.c

     as: "/var/tmp/ccMrSkJd.s", line 61: error 1052: Directive name not
     recognized - NSUBSPA
     as: "/var/tmp/ccMrSkJd.s", line 321: error 1052: Directive name not
     recognized - NSUBSPA
     as: "/var/tmp/ccMrSkJd.s", line 438: error 1052: Directive name not
     recognized - NSUBSPA
     as: "/var/tmp/ccMrSkJd.s", line 487: error 1052: Directive name not
     recognized - BEGIN_BRTAB
     as: "/var/tmp/ccMrSkJd.s", line 508: error 1052: Directive name not
     recognized - END_BRTAB
     as: "/var/tmp/ccMrSkJd.s", line 622: error 1052: Directive name not
     recognized - BEGIN_BRTAB
     as: "/var/tmp/ccMrSkJd.s", line 643: error 1052: Directive name not
     recognized - END_BRTAB
     as: "/var/tmp/ccMrSkJd.s", line 811: error 1052: Directive name not
     recognized - BEGIN_BRTAB
     as: "/var/tmp/ccMrSkJd.s", line 830: error 1052: Directive name not
     recognized - END_BRTAB
     as: "/var/tmp/ccMrSkJd.s", line 1011: error 1052: Directive name not
     recognized - NSUBSPA
     as: "/var/tmp/ccMrSkJd.s", line 1012: error 1052: Directive name not
     recognized - PARAM
     as: "/var/tmp/ccMrSkJd.s", line 1080: error 1052: Directive name not
     recognized - BEGIN_BRTAB
     as: "/var/tmp/ccMrSkJd.s", line 1099: error 1052: Directive name not
     recognized - END_BRTAB
     as: "/var/tmp/ccMrSkJd.s", line 1160: error 1052: Directive name not
     recognized - NSUBSPA
     as: "/var/tmp/ccMrSkJd.s", line 1161: error 1052: Directive name not
     recognized - PARAM
     as: "/var/tmp/ccMrSkJd.s", line 1255: error 1052: Directive name not
     recognized - BEGIN_BRTAB
     as: "/var/tmp/ccMrSkJd.s", line 1270: error 1052: Directive name not
     recognized - END_BRTAB
     as: "/var/tmp/ccMrSkJd.s", line 1609: error 1052: Directive name not
     recognized - NSUBSPA
     as: "/var/tmp/ccMrSkJd.s", line 1721: error 1052: Directive name not
     recognized - NSUBSPA
     as: "/var/tmp/ccMrSkJd.s", line 1807: error 1052: Directive name not
     recognized - NSUBSPA
     as: "/var/tmp/ccMrSkJd.s", line 1808: error 1052: Directive name not
     recognized - PARAM

Re: Compiler Error

[Jeffrey A Law]

  In message < OF76B9EFFB.2BDF8B46-ON862568DA.00713EA8@deerfield.baxter.com >you 
write:
  > 
  > Hi,
  > We've downloaded the GCC 2.95.2 to compile a C file. It was
  >      compiled successfully with the old version of GCC compiler. But we got
  >      error messages while trying to compile it with GCC 2.95.2. Please tell
  >      us where the problem is. Or please provide us the user name and
  >      password to access the ftp://egcs.cygnus.com:/pub/egcs/releases .
  >      so that we can download an older version of GCC. Thank you very much.
You have configured gcc to expect/use gas, but it is finding the HP
assembler first.  See the FAQ.
jeff

sh undefined

[Saqueb Ali]

I am running AIX 4.2.1 and I am now loading gcc2.95.2. After the 
installation was over, I got quite a few error messages on the SMIT window 
similar to
***
Could not load program /usr/local/lib/gcc-2.95.2/fixincl
Symbol putc_unlocked in sh is undefined
Error was: Exec format error
Cleaning up DONE files.
Removing unneeded directories:
Could not load program /usr/local/bin/gcc
Symbol putc_unlocked in sh is undefined
Error was: Exec format error
***

I also try to run ./dofix under /usr/local/lib/gcc-2.95.2 but I get same 
error. Any help will be appreciated. Thanks.

Saqueb Ali



--
Saqueb Ali
Webmaster, AISR Systems Dept.
Thomas Jefferson University, Philadelphia, PA
Tel: 215-503-3126  Fax: 215-923-3203

Re: sh undefined

[David Starner]

On Thu, Jan 20, 2000 at 11:31:00AM -0500, Saqueb Ali wrote:
> I am running AIX 4.2.1 and I am now loading gcc2.95.2. After the 
> installation was over, I got quite a few error messages on the SMIT window 
> similar to
> ***
> Could not load program /usr/local/lib/gcc-2.95.2/fixincl
You're using a binary installation some else provided. Please
talk to them about these problems. However,

> Symbol putc_unlocked in sh is undefined
Looks like a bug in your AIX installation. Does /bin/sh work at
all?

-- 
David Starner - dstarner98@aasaa.ofe.org
If you wish to strive for peace of soul then believe; 
if you wish to be a devotee of truth, then inquire.
   -- Friedrich Nietzsche

compiler error

[Saqueb Ali]

I installed gcc 2.95.2 for AIX 4.3. MY OS is also AIX 4.3. It installed 
without giving an error message. When I tried to use gcc to compile a 
program, it gives error

configure: error: installation or configuration problem: C compiler cannot 
create executables.

Any help is appreciated. Thanks.

Saqueb Ali

--
Saqueb Ali
Webmaster, AISR Systems Dept.
Thomas Jefferson University, Philadelphia, PA
Tel: 215-503-3126  Fax: 215-923-3203

Re: compiler error

[David Edelsohn]

>>>>> Saqueb Ali writes:

Saqueb> I installed gcc 2.95.2 for AIX 4.3. MY OS is also AIX 4.3. It installed 
Saqueb> without giving an error message. When I tried to use gcc to compile a 
Saqueb> program, it gives error

Saqueb> configure: error: installation or configuration problem: C compiler cannot 
Saqueb> create executables.

	Do you have the AIX bind_cmds fileset installed to provide the
assembler and linker?  Do you have the development libraries installed?
If I remember from last time, your AIX system did not have most of the
development filesets installed -- it was set up as a turnkey system.

David

Re: compiler error

[Saqueb Ali]

Hi. Sorry to bother you again. But, I need some further help. I already 
upgraded to AIX 4.3.3 from 4.2 and bind_cmds filesets got installed with 
it. When you say "development libraries installed", can you tell me what 
kind of file sets are we looking for or any names. Any help is appreciated. 
Thanks.

Saqueb Ali

At 10:42 AM 1/26/2000 -0500, you wrote:
> >>>>> Saqueb Ali writes:
>
>Saqueb> I installed gcc 2.95.2 for AIX 4.3. MY OS is also AIX 4.3. It 
>installed
>Saqueb> without giving an error message. When I tried to use gcc to compile a
>Saqueb> program, it gives error
>
>Saqueb> configure: error: installation or configuration problem: C 
>compiler cannot
>Saqueb> create executables.
>
>         Do you have the AIX bind_cmds fileset installed to provide the
>assembler and linker?  Do you have the development libraries installed?
>If I remember from last time, your AIX system did not have most of the
>development filesets installed -- it was set up as a turnkey system.
>
>David


--
Saqueb Ali
Webmaster, AISR Systems Dept.
Thomas Jefferson University, Philadelphia, PA
Tel: 215-503-3126  Fax: 215-923-3203

Re: compiler error

[David Edelsohn]

>>>>> Saqueb Ali writes:

Saqueb> Hi. Sorry to bother you again. But, I need some further help. I already 
Saqueb> upgraded to AIX 4.3.3 from 4.2 and bind_cmds filesets got installed with 
Saqueb> it. When you say "development libraries installed", can you tell me what 
Saqueb> kind of file sets are we looking for or any names. Any help is appreciated. 

Saqueb> I installed gcc 2.95.2 for AIX 4.3. MY OS is also AIX 4.3. It installed
Saqueb> without giving an error message. When I tried to use gcc to compile a
Saqueb> program, it gives error
Saqueb> configure: error: installation or configuration problem: C compiler cannot
Saqueb> create executables.

	Why don't you try running your GCC installation directly and see
what error message it is producing.  The above error message is from the
configure script of some application and is not providing any detail about
what is wrong.  How about trying to compile a "Hello, World!" program?  If
you need to, us "gcc -v" to get more detail and see which phase of
compiling a simple application is failing.  Then you should know what
system utility or library is missing.

	You installed GCC in the default location?  You have gcc and the
AIX standard directories in your path?  The installed GCC has correct
permissions for you to be able to execute all of the programs?

David