* Build report for AIX 5.1
@ 2005-08-22 9:00 Mario Linke
0 siblings, 0 replies; 6+ messages in thread
From: Mario Linke @ 2005-08-22 9:00 UTC (permalink / raw)
To: gcc
Hi,
i just built GCC 4.0.1 on AIX 5.1 using the following commands:
../gcc-4.0.1/configure --with-libiconv-prefix=/usr --disable-nls
--disable-multilib
make bootstrap-lean
make install
$ config.guess
powerpc-ibm-aix5.1.0.0
$ gcc -v
Using built-in specs.
Target: powerpc-ibm-aix5.1.0.0
Configured with: /home/linke/temp/gcc-4.0.1/configure
--with-libiconv-prefix=/usr --disable-nls --disable-multilib
Thread model: aix
gcc version 4.0.1
The system is an IBM pSeries M80 with AIX 5.1 at the latest patchlevel.
The building c-complier is gcc 4.0.0
Make is gnu-make 3.80
The disable-xxx configure-options shouldn't be necessary, i used them
for buildtime- and space-saving reasons.
The whole build took less than two hours.
Mario Linke
^ permalink raw reply [flat|nested] 6+ messages in thread
* Build report for AIX 5.1
@ 2006-06-06 15:59 Mario Linke
0 siblings, 0 replies; 6+ messages in thread
From: Mario Linke @ 2006-06-06 15:59 UTC (permalink / raw)
To: gcc
Hi,
i just built GCC 4.1.1 on AIX 5.1 using the following commands:
../gcc-4.1.1/configure --with-libiconv-prefix=/usr --disable-nls
--disable-multilib
make bootstrap-lean
make install
$ config.guess
powerpc-ibm-aix5.1.0.0
$ gcc -v
Using built-in specs.
Target: powerpc-ibm-aix5.1.0.0
Configured with: /home/linke/temp/gcc-4.1.1/configure
--with-libiconv-prefix=/usr --disable-nls --disable-multilib
Thread model: aix
gcc version 4.1.1
The system is an IBM pSeries M80 with AIX 5.1 at the latest patchlevel.
The building c-complier is gcc 4.1.0
Make is gnu-make 3.80
The disable-xxx configure-options shouldn't be necessary, i used them
for buildtime- and space-saving reasons.
The whole build took less than two hours.
Mario Linke
^ permalink raw reply [flat|nested] 6+ messages in thread
* Build report for AIX 5.1
@ 2006-03-04 13:43 Mario Linke
0 siblings, 0 replies; 6+ messages in thread
From: Mario Linke @ 2006-03-04 13:43 UTC (permalink / raw)
To: gcc
Hi,
i just built GCC 4.1.0 on AIX 5.1 using the following commands:
../gcc-4.1.0/configure --with-libiconv-prefix=/usr --disable-nls
--disable-multilib
make bootstrap-lean
make install
$ config.guess
powerpc-ibm-aix5.1.0.0
$ gcc -v
Using built-in specs.
Target: powerpc-ibm-aix5.1.0.0
Configured with: /home/linke/temp/gcc-4.1.0/configure
--with-libiconv-prefix=/usr --disable-nls --disable-multilib
Thread model: aix
gcc version 4.1.0
The system is an IBM pSeries M80 with AIX 5.1 at the latest patchlevel.
The building c-complier is gcc 4.0.2
Make is gnu-make 3.80
The disable-xxx configure-options shouldn't be necessary, i used them
for buildtime- and space-saving reasons.
The whole build took less than two hours.
Mario Linke
^ permalink raw reply [flat|nested] 6+ messages in thread
* Build report for AIX 5.1
@ 2005-10-26 11:27 Mario Linke
0 siblings, 0 replies; 6+ messages in thread
From: Mario Linke @ 2005-10-26 11:27 UTC (permalink / raw)
To: gcc
Hi,
i just built GCC 4.0.2 on AIX 5.1 using the following commands:
../gcc-4.0.1/configure --with-libiconv-prefix=/usr --disable-nls
--disable-multilib
make bootstrap-lean
make install
$ config.guess
powerpc-ibm-aix5.1.0.0
$ gcc -v
Using built-in specs.
Target: powerpc-ibm-aix5.1.0.0
Configured with: /home/linke/temp/gcc-4.0.2/configure
--with-libiconv-prefix=/usr --disable-nls --disable-multilib
Thread model: aix
gcc version 4.0.2
The system is an IBM pSeries M80 with AIX 5.1 at the latest patchlevel.
The building c-complier is gcc 4.0.1
Make is gnu-make 3.80
The disable-xxx configure-options shouldn't be necessary, i used them
for buildtime- and space-saving reasons.
The whole build took less than two hours.
Mario Linke
^ permalink raw reply [flat|nested] 6+ messages in thread
* Build report for AIX 5.1
@ 2005-04-26 13:25 Mario Linke
0 siblings, 0 replies; 6+ messages in thread
From: Mario Linke @ 2005-04-26 13:25 UTC (permalink / raw)
To: gcc
Hi,
i just built GCC 4.0.0 on AIX 5.1 using the following commands:
../gcc-4.0.0/configure --with-libiconv-prefix=/usr --disable-nls
--disable-multilib
make bootstrap-lean
make install
$ config.guess
powerpc-ibm-aix5.1.0.0
$ gcc -v
Using built-in specs.
Target: powerpc-ibm-aix5.1.0.0
Configured with: /home/linke/temp/gcc-4.0.0/configure
--with-libiconv-prefix=/usr --disable-nls --disable-multilib
Thread model: aix
gcc version 4.0.0
The system is an IBM pSeries M80 with AIX 5.1 at the latest patchlevel.
The building c-complier is gcc 3.4.3
Make is gnu-make 3.80
The disable-xxx configure-options shouldn't be necessary, i used them
for buildtime- and space-saving reasons.
The whole build took less than two hours.
Mario Linke
^ permalink raw reply [flat|nested] 6+ messages in thread
* Build report for AIX 5.1
@ 2004-05-17 14:26 Mario Linke
0 siblings, 0 replies; 6+ messages in thread
From: Mario Linke @ 2004-05-17 14:26 UTC (permalink / raw)
To: gcc
Hi,
i just built GCC 3.4.0 on AIX 5.1 using the following commands:
../gcc-3.4.0/configure
make bootstrap-lean
make install
$ config.guess
powerpc-ibm-aix5.1.0.0
$ gcc -v
Reading specs from /usr/local/lib/gcc/powerpc-ibm-aix5.1.0.0/3.4.0/specs
Configured with: ../gcc-3.4.0/configure
Thread model: aix
gcc version 3.4.0
The system is an IBM pSeries 615 with AIX 5.1 at the latest patchlevel.
The system c-complier is VAC 6.0.0.7
Make is gnu-make 3.80
Mario Linke
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2006-06-06 15:52 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-08-22 9:00 Build report for AIX 5.1 Mario Linke
-- strict thread matches above, loose matches on Subject: below --
2006-06-06 15:59 Mario Linke
2006-03-04 13:43 Mario Linke
2005-10-26 11:27 Mario Linke
2005-04-26 13:25 Mario Linke
2004-05-17 14:26 Mario Linke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).