* Re: Canadian cross on cygwin
@ 2004-08-26 9:58 Tal Agmon
2004-08-31 1:06 ` James E Wilson
0 siblings, 1 reply; 6+ messages in thread
From: Tal Agmon @ 2004-08-26 9:58 UTC (permalink / raw)
To: James E Wilson; +Cc: gcc
Jim Wilson wrote:
>Tal Agmon wrote:
>> I'm trying to compile on cygwin using a mingw32-gcc.exe compiler. What should
I
>> specify in
>> --build and --host?
>
>Just specify --target. config.guess will default built and host
>appropriately. You only need to specify host/build if you want to do a
>"canadian" cross where the host and build are different.
Isn't compiling a compiler that is going to generate crx executable, will run
on windows and built on cygwin is a canadian cross?
I know I need to specify --target=crx-elf and I guess --build=i686-pc-cygwin
but I don't know which host to specify.
I tried many options in the form *-*windows or *-*-mingw32 but no option seem
to work.
Regards,
Tal Agmon
Software Engineer phone: +49-8141-35-1396
CompactRISC Development Tools fax: +49-8141-35-11-1396
National Semiconductor GmbH mailto:Tal.Agmon@nsc.com
Livry-Gargan Str. 10 internet:
http://www.national.com
82256 Fuerstenfeldbruck, Germany
"James E Wilson"
<wilson@specifixi To: "Tal Agmon" <Tal.Agmon@nsc.com>
nc.com> cc: gcc@gcc.gnu.org
Subject: Re: Canadian cross on cygwin
08/26/04 02:47 AM
Tal Agmon wrote:
> I'm trying to compile on cygwin using a mingw32-gcc.exe compiler. What should
I
> specify in
> --build and --host?
Just specify --target. config.guess will default built and host
appropriately. You only need to specify host/build if you want to do a
"canadian" cross where the host and build are different.
--
Jim Wilson, GNU Tools Support, http://www.SpecifixInc.com
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Canadian cross on cygwin
2004-08-26 9:58 Canadian cross on cygwin Tal Agmon
@ 2004-08-31 1:06 ` James E Wilson
2004-09-01 13:43 ` [OT] " Dave Korn
0 siblings, 1 reply; 6+ messages in thread
From: James E Wilson @ 2004-08-31 1:06 UTC (permalink / raw)
To: Tal Agmon; +Cc: gcc
On Thu, 2004-08-26 at 01:12, Tal Agmon wrote:
> Isn't compiling a compiler that is going to generate crx executable, will run
> on windows and built on cygwin is a canadian cross?
cygwin does run on windows, so it isn't clear what you mean here.
The easy solution here is that you build a --target=crx-elf compiler.
This will give you a cygwin cross compiler to crx-elf. Anyone with
cygwin can run it, and perhaps all they need is the cygwin dll, though
it doesn't hurt to give them an entire cygwin environment.
If you won't want to use the cygwin dll, then one wonders why you are
using cygwin at all. Using mingw32 to build a --target=crx-elf
compiler, and you will get a mingw32 cross compiler to crx-elf.
Assuming that mingw32 can build gcc. I don't have any experience with
mingw32, so I don't know what its capabilities are.
Trying to build a canadian cross cygwin build/mingw32 host/crx-elf
target is probably a lot of unnecessary complexity. Building canadian
crosses takes a lot of time and effort to get right. Don't waste your
time doing it if you really don't need to.
Configuring for a windows host makes no sense. If gcc could be built
natively, then we wouldn't need cygwin or mingw32 in the first place.
If you need help dealing with cygwin/mingw32 issues, then you are
probably better off asking on a cygwin or mingw32 mailing list. We can
only help you with gcc issues.
--
Jim Wilson, GNU Tools Support, http://www.SpecifixInc.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* [OT] RE: Canadian cross on cygwin
2004-08-31 1:06 ` James E Wilson
@ 2004-09-01 13:43 ` Dave Korn
0 siblings, 0 replies; 6+ messages in thread
From: Dave Korn @ 2004-09-01 13:43 UTC (permalink / raw)
To: 'Tal Agmon'; +Cc: gcc
> -----Original Message-----
> From: gcc-owner On Behalf Of James E Wilson
> Sent: 31 August 2004 01:28
> On Thu, 2004-08-26 at 01:12, Tal Agmon wrote:
> > Isn't compiling a compiler that is going to generate crx
> executable, will run
> > on windows and built on cygwin is a canadian cross?
>
> cygwin does run on windows, so it isn't clear what you mean here.
Tal, I am going to interpret it as meaning you want it to be mingw-hosted,
i.e. not to require the cygwin dll in end use. So stop me if I've got it
wrong.
> The easy solution here is that you build a --target=crx-elf compiler.
> This will give you a cygwin cross compiler to crx-elf. Anyone with
> cygwin can run it, and perhaps all they need is the cygwin dll, though
> it doesn't hurt to give them an entire cygwin environment.
>
> If you won't want to use the cygwin dll, then one wonders why you are
> using cygwin at all. Using mingw32 to build a --target=crx-elf
> compiler, and you will get a mingw32 cross compiler to crx-elf.
> Assuming that mingw32 can build gcc. I don't have any experience with
> mingw32, so I don't know what its capabilities are.
Although mingw/msys works well enough, the cygwin environment is a good
deal nicer to work in, as it provides a fully posix fs and environment,
rather than trying to squeeze *nix-y software into dealing with
windoze-style file paths. But it is an emulation layer, which makes it
slower; you might well want to use it as a dev environment but have your
production compiler mingw hosted for native win32 speed[*].
> Trying to build a canadian cross cygwin build/mingw32 host/crx-elf
> target is probably a lot of unnecessary complexity. Building canadian
> crosses takes a lot of time and effort to get right. Don't waste your
> time doing it if you really don't need to.
I don't think a canadian cross is necessary, in fact. The cygwin gcc is
both a native (cygwin-targetted) and cross (mingw-targetted) compiler.
Adding "-mno-cygwin" to the CFLAGS (and any similar linker flags etc.) and
configuring simply with "--target=crx-elf" should produce a mingw-hosted
gcc. With a bit of luck and a tailwind.
cheers,
DaveK
[*] Hey! I never thought I'd use the words "win32" and "speed" in the same
sentence :-O
--
Can't think of a witty .sigline today....
^ permalink raw reply [flat|nested] 6+ messages in thread
* Canadian cross on cygwin
@ 2004-08-25 17:38 Tal Agmon
2004-08-25 23:47 ` Mike Stump
2004-08-26 0:13 ` James E Wilson
0 siblings, 2 replies; 6+ messages in thread
From: Tal Agmon @ 2004-08-25 17:38 UTC (permalink / raw)
To: gcc
Hi,
I wish to compile a gcc port for the crx target with windows as a host. I read
the CrossFAC and
many other references but I still can't figure out the right configure command
line.
I'm trying to compile on cygwin using a mingw32-gcc.exe compiler. What should I
specify in
--build and --host?
Regards,
Tal Agmon
Software Engineer phone: +49-8141-35-1396
CompactRISC Development Tools fax: +49-8141-35-11-1396
National Semiconductor GmbH mailto:Tal.Agmon@nsc.com
Livry-Gargan Str. 10 internet:
http://www.national.com
82256 Fuerstenfeldbruck, Germany
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Canadian cross on cygwin
2004-08-25 17:38 Tal Agmon
@ 2004-08-25 23:47 ` Mike Stump
2004-08-26 0:13 ` James E Wilson
1 sibling, 0 replies; 6+ messages in thread
From: Mike Stump @ 2004-08-25 23:47 UTC (permalink / raw)
To: Tal Agmon; +Cc: gcc
On Aug 25, 2004, at 9:03 AM, Tal Agmon wrote:
> I wish to compile a gcc port for the crx target with windows as a
> host. I read
> the CrossFAC and many other references but I still can't figure out
> the right configure command line.
>
> I'm trying to compile on cygwin using a mingw32-gcc.exe compiler. What
> should I
> specify in --build and --host?
First try:
configure --target=targetname
I don't know what's so complicated about that. After that is built up
and works, then you can see if it differs from what you want. If it
doesn't you are done. If it does, you will be able to say how. If for
example, you want the host system to be foo instead of
`./config.guess`, then, you can add --host=<foo> and see if that does
what you want...
Also, you didn't say what you tried, and what that produced and why
that was wrong. If you didn't try anything, then just let me recommend
to leap into it and just try things.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Canadian cross on cygwin
2004-08-25 17:38 Tal Agmon
2004-08-25 23:47 ` Mike Stump
@ 2004-08-26 0:13 ` James E Wilson
1 sibling, 0 replies; 6+ messages in thread
From: James E Wilson @ 2004-08-26 0:13 UTC (permalink / raw)
To: Tal Agmon; +Cc: gcc
Tal Agmon wrote:
> I'm trying to compile on cygwin using a mingw32-gcc.exe compiler. What should I
> specify in
> --build and --host?
Just specify --target. config.guess will default built and host
appropriately. You only need to specify host/build if you want to do a
"canadian" cross where the host and build are different.
--
Jim Wilson, GNU Tools Support, http://www.SpecifixInc.com
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-09-01 13:43 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-08-26 9:58 Canadian cross on cygwin Tal Agmon
2004-08-31 1:06 ` James E Wilson
2004-09-01 13:43 ` [OT] " Dave Korn
-- strict thread matches above, loose matches on Subject: below --
2004-08-25 17:38 Tal Agmon
2004-08-25 23:47 ` Mike Stump
2004-08-26 0:13 ` James E Wilson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).