* egcs installed
@ 1998-07-31 18:50 Michael Brandt
0 siblings, 0 replies; 5+ messages in thread
From: Michael Brandt @ 1998-07-31 18:50 UTC (permalink / raw)
To: egcs
Hi,
I thought you'd like to know that I installed egcs 1.0.3 on a rather exotic
system: "m68k-atari-netbsd1.3.2" (output of srcdir/config.guess).
"make bootstrap" took between 7 and 8 hours and finished without an error. As
far as I have already tested it, egcs runs fine.
Thanks for the good software!
Mike
------------------------------------------
Hiroshima 45 - Tschernobyl 86 - Windows 95
------------------------------------------
^ permalink raw reply [flat|nested] 5+ messages in thread
* egcs installed
@ 1998-08-14 16:55 David J Chase
0 siblings, 0 replies; 5+ messages in thread
From: David J Chase @ 1998-08-14 16:55 UTC (permalink / raw)
To: egcs
Hi,
I just installed installed egcs 1.0.3a on two machines (this week).
sparc-sun-solaris2.6
(installed as user in $HOME/local/)
i586-pc-linux-gnulibc1
(installed as su in /usr/local/)
the only trouble I had was (as mentioned in the FAQ) a stray : in a LIB_PATH
and (more annoyying) the include directories (both c++ and gcc) were given
permissions of 700. I didn't notice this on the sun (since I'm the user)
but I just checked it and it happened there too. On the PC I had to go
and reset the permissions on those directories after I found the error.
It was minor, but could be easily corrected (I'd rather someone who is familiar
with the Makefiles do the correcting though :-)
I did not run the test suite, but all of the programs I tried to compile with
it worked beautifully. The only changes that were really nec. were a few header
changes (and occasionally fixing some non-standard C++).
In particular, I decided to install egcs instead of sticking with gcc-2.7.2.x
when I found a trivial exception example in Stroustroup 3rd Ed which I needed
to use (catching alloc errors) and found I could not. It works fine now.
Thanks for putting this all together.
David
++++++++++++++++++++++++++++++++++++
David J. Chase
Sr. Analyst, Columbia Energy
dchase@columbiaenergy.com
<dchase@math.rice.edu>
713-350-8340 (voice)-----713-621-5392 (fax)
1330 Post Oak Blvd., Houston, TX 77056
++++++++++++++++++++++++++++++++++++
^ permalink raw reply [flat|nested] 5+ messages in thread
* egcs installed
@ 1998-07-30 15:09 Carlos Cassino
0 siblings, 0 replies; 5+ messages in thread
From: Carlos Cassino @ 1998-07-30 15:09 UTC (permalink / raw)
To: egcs
Hi.
I have successfully built and installed egcs.
I'm using RedHat5.1, config.guess output is:
i586-pc-linux-gnu
Congratulations for your very good job!
Best regards,
-- Cassino
^ permalink raw reply [flat|nested] 5+ messages in thread
* egcs installed
@ 1998-05-21 10:23 R. S. de Araujo
0 siblings, 0 replies; 5+ messages in thread
From: R. S. de Araujo @ 1998-05-21 10:23 UTC (permalink / raw)
To: egcs
I have successfully built and installed egcs
Thanks for another good Free software
my objdir/config.status :
#!/bin/sh
# This file was generated automatically by configure. Do not edit.
# This directory was configured as follows:
../egcs-1.0.3a/configure --host=i586-pc-linux-gnulibc1 --norecursion
#
and this is my objdir/config.cache
ac_cv_c_const=${ac_cv_c_const=yes}
ac_cv_decl_sys_siglist=${ac_cv_decl_sys_siglist=yes}
ac_cv_func_alloca_works=${ac_cv_func_alloca_works=yes}
ac_cv_func_bsearch=${ac_cv_func_bsearch=yes}
ac_cv_func_bzero=${ac_cv_func_bzero=yes}
ac_cv_func_getcwd=${ac_cv_func_getcwd=yes}
ac_cv_func_memcpy=${ac_cv_func_memcpy=yes}
ac_cv_func_memmove=${ac_cv_func_memmove=yes}
ac_cv_func_memset=${ac_cv_func_memset=yes}
ac_cv_func_setvbuf=${ac_cv_func_setvbuf=yes}
ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes}
ac_cv_func_sigsetmask=${ac_cv_func_sigsetmask=yes}
ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes}
ac_cv_func_strchr=${ac_cv_func_strchr=yes}
ac_cv_func_strdup=${ac_cv_func_strdup=yes}
ac_cv_func_strerror=${ac_cv_func_strerror=yes}
ac_cv_func_strtoul=${ac_cv_func_strtoul=yes}
ac_cv_func_vfprintf=${ac_cv_func_vfprintf=yes}
ac_cv_func_vsprintf=${ac_cv_func_vsprintf=yes}
ac_cv_header_alloca_h=${ac_cv_header_alloca_h=yes}
ac_cv_header_minix_config_h=${ac_cv_header_minix_config_h=no}
ac_cv_header_stdc=${ac_cv_header_stdc=yes}
ac_cv_header_stddef_h=${ac_cv_header_stddef_h=yes}
ac_cv_header_stdlib_h=${ac_cv_header_stdlib_h=yes}
ac_cv_header_string_h=${ac_cv_header_string_h=yes}
ac_cv_header_strings_h=${ac_cv_header_strings_h=yes}
ac_cv_header_sys_fcntl_h=${ac_cv_header_sys_fcntl_h=yes}
ac_cv_header_sys_file_h=${ac_cv_header_sys_file_h=yes}
ac_cv_header_sys_ptem_h=${ac_cv_header_sys_ptem_h=no}
ac_cv_header_sys_time_h=${ac_cv_header_sys_time_h=yes}
ac_cv_header_sys_ttold_h=${ac_cv_header_sys_ttold_h=no}
ac_cv_header_sys_varargs_h=${ac_cv_header_sys_varargs_h=yes}
ac_cv_header_termio_h=${ac_cv_header_termio_h=yes}
ac_cv_header_termios_h=${ac_cv_header_termios_h=yes}
ac_cv_header_time_h=${ac_cv_header_time_h=yes}
ac_cv_header_unistd_h=${ac_cv_header_unistd_h=yes}
ac_cv_header_varargs_h=${ac_cv_header_varargs_h=yes}
ac_cv_lib_bsd_sigblock=${ac_cv_lib_bsd_sigblock=yes}
ac_cv_lib_curses_tputs=${ac_cv_lib_curses_tputs=yes}
ac_cv_lib_fl_yywrap=${ac_cv_lib_fl_yywrap=yes}
ac_cv_path_install=${ac_cv_path_install='/usr/bin/install -c'}
ac_cv_prog_AWK=${ac_cv_prog_AWK=mawk}
ac_cv_prog_CC=${ac_cv_prog_CC=gcc}
ac_cv_prog_CPP=${ac_cv_prog_CPP='gcc -E'}
ac_cv_prog_LEX=${ac_cv_prog_LEX=flex}
ac_cv_prog_RANLIB=${ac_cv_prog_RANLIB=ranlib}
ac_cv_prog_YACC=${ac_cv_prog_YACC='bison -y'}
ac_cv_prog_cc_cross=${ac_cv_prog_cc_cross=no}
ac_cv_prog_cc_g=${ac_cv_prog_cc_g=yes}
ac_cv_prog_cc_works=${ac_cv_prog_cc_works=yes}
ac_cv_prog_gcc=${ac_cv_prog_gcc=yes}
ac_cv_prog_make_make_set=${ac_cv_prog_make_make_set=yes}
ac_cv_struct_tm=${ac_cv_struct_tm=time.h}
ac_cv_type_off_t=${ac_cv_type_off_t=yes}
am_cv_cygwin32=${am_cv_cygwin32=no}
am_cv_exeext=${am_cv_exeext=no}
gcc_cv_decl_needed_calloc=${gcc_cv_decl_needed_calloc=no}
gcc_cv_decl_needed_free=${gcc_cv_decl_needed_free=no}
gcc_cv_decl_needed_malloc=${gcc_cv_decl_needed_malloc=no}
gcc_cv_decl_needed_realloc=${gcc_cv_decl_needed_realloc=no}
gcc_cv_prog_LN=${gcc_cv_prog_LN=ln}
gcc_cv_prog_LN_S=${gcc_cv_prog_LN_S='ln -s'}
^ permalink raw reply [flat|nested] 5+ messages in thread
* egcs installed
@ 1998-04-23 10:41 letschert
0 siblings, 0 replies; 5+ messages in thread
From: letschert @ 1998-04-23 10:41 UTC (permalink / raw)
To: egcs
Hi,
Thanks !
Thomas
_________________________________________
egcs-1.0.2/config.guess
i586-pc-linux-gnulibc1
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~1998-08-14 16:55 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1998-07-31 18:50 egcs installed Michael Brandt
-- strict thread matches above, loose matches on Subject: below --
1998-08-14 16:55 David J Chase
1998-07-30 15:09 Carlos Cassino
1998-05-21 10:23 R. S. de Araujo
1998-04-23 10:41 letschert
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).