From: "Pierre Muller" <pierre.muller@ics-cnrs.unistra.fr>
To: "'Eli Zaretskii'" <eliz@gnu.org>
Cc: <tromey@redhat.com>, <gdb-patches@sourceware.org>
Subject: RE: [RFC-v2] Allow explicit 16 or 32 char in 'x /s'
Date: Mon, 05 Apr 2010 23:01:00 -0000 [thread overview]
Message-ID: <002701cad513$e44a7420$acdf5c60$@muller@ics-cnrs.unistra.fr> (raw)
In-Reply-To: <83aatnxqhm.fsf@gnu.org>
> -----Message d'origine-----
> De : gdb-patches-owner@sourceware.org [mailto:gdb-patches-
> owner@sourceware.org] De la part de Eli Zaretskii
> Envoyé : Thursday, April 01, 2010 3:16 PM
> À : Pierre Muller
> Cc : tromey@redhat.com; gdb-patches@sourceware.org
> Objet : Re: [RFC-v2] Allow explicit 16 or 32 char in 'x /s'
>
> > From: "Pierre Muller" <pierre.muller@ics-cnrs.unistra.fr>
> > Cc: <tromey@redhat.com>, <gdb-patches@sourceware.org>
> > Date: Thu, 1 Apr 2010 11:34:00 +0200
> >
> > Should I just mention that the output is language dependent
> > and uses UTF-16 or UTF-32 for c, cplus, assembler and minimal
> languages?
>
> Yes, I think so. Most importantly, we should say that this encoding
> cannot be controlled by the user.
I tried to write something for
the C output for 'x /hs',
but I don't know if C as the language needs to be written especially,
and likewise for UTF-16 and UTF-32.
Eli, could you please take a look?
Thanks in advance,
Pierre
2010-04-06 Pierre Muller <muller@ics.u-strasbg.fr>
* gdbtypes.h (builtin_type): Add BUILTIN_CHAR16 and BUILTIN_CHAR32
fields.
* gdbtypes.c (gdbtypes_post_init): Set BUILTIN_CHAR16 and
BUILTIN_CHAR32 fields.
* printcmd.c (decode_format): Set char size to '\0'
for strings unless explicit size is given.
(print_formatted): Correct calculation of NEXT_ADDRESS
for 16 or 32 bit strings.
(do_examine): Do not force byte size for strings.
Use builtin_char16 and builtin_char32 types to display
16 or 32 bit-wide strings.
(x_command): Set LAST_SIZE to 'b' for string type.
2010-04-06 Pierre Muller <muller@ics.u-strasbg.fr>
* gdb.texinfo (Examining memory): Update for
change in string display with explicit size.
2010-04-06 Pierre Muller <muller@ics.u-strasbg.fr>
* gdb.base/charset.c (Strin16, String32): New variables.
* gdb.base/charset.exp (gdb_test): Test correct display
of 16 or 32 bit strings.
Index: src/gdb/gdbtypes.c
===================================================================
RCS file: /cvs/src/src/gdb/gdbtypes.c,v
retrieving revision 1.188
diff -u -p -r1.188 gdbtypes.c
--- src/gdb/gdbtypes.c 1 Mar 2010 17:19:22 -0000 1.188
+++ src/gdb/gdbtypes.c 5 Apr 2010 22:53:39 -0000
@@ -3474,6 +3474,13 @@ gdbtypes_post_init (struct gdbarch *gdba
TYPE_NOTTEXT (builtin_type->builtin_int8) = 1;
TYPE_NOTTEXT (builtin_type->builtin_uint8) = 1;
+ /* Multi-byte character types. */
+ builtin_type->builtin_char16
+ = arch_integer_type (gdbarch, 16, 0, "char16_t");
+ builtin_type->builtin_char32
+ = arch_integer_type (gdbarch, 32, 0, "char32_t");
+
+
/* Default data/code pointer types. */
builtin_type->builtin_data_ptr
= lookup_pointer_type (builtin_type->builtin_void);
Index: src/gdb/gdbtypes.h
===================================================================
RCS file: /cvs/src/src/gdb/gdbtypes.h,v
retrieving revision 1.125
diff -u -p -r1.125 gdbtypes.h
--- src/gdb/gdbtypes.h 15 Mar 2010 02:42:54 -0000 1.125
+++ src/gdb/gdbtypes.h 5 Apr 2010 22:53:39 -0000
@@ -1099,6 +1099,9 @@ struct builtin_type
struct type *builtin_int128;
struct type *builtin_uint128;
+ /* Multi-byte character types. */
+ struct type *builtin_char16;
+ struct type *builtin_char32;
/* Pointer types. */
Index: src/gdb/printcmd.c
===================================================================
RCS file: /cvs/src/src/gdb/printcmd.c,v
retrieving revision 1.173
diff -u -p -r1.173 printcmd.c
--- src/gdb/printcmd.c 5 Mar 2010 20:18:14 -0000 1.173
+++ src/gdb/printcmd.c 5 Apr 2010 22:53:40 -0000
@@ -260,6 +260,11 @@ decode_format (char **string_ptr, int of
/* Characters default to one byte. */
val.size = osize ? 'b' : osize;
break;
+ case 's':
+ /* Display strings with byte size chars unless explicitly specified.
*/
+ val.size = '\0';
+ break;
+
default:
/* The default is the size most recently specified. */
val.size = osize;
@@ -295,7 +300,7 @@ print_formatted (struct value *val, int
next_address = (value_address (val)
+ val_print_string (elttype,
value_address (val), -1,
- stream, options));
+ stream, options) * len);
}
return;
@@ -802,9 +807,11 @@ do_examine (struct format_data fmt, stru
next_gdbarch = gdbarch;
next_address = addr;
- /* String or instruction format implies fetch single bytes
- regardless of the specified size. */
- if (format == 's' || format == 'i')
+ /* Instruction format implies fetch single bytes
+ regardless of the specified size.
+ The case of strings is handled n decode_format, only explicit
+ size operator are not changed to 'b'. */
+ if (format == 'i')
size = 'b';
if (size == 'a')
@@ -831,6 +838,27 @@ do_examine (struct format_data fmt, stru
else if (size == 'g')
val_type = builtin_type (next_gdbarch)->builtin_int64;
+ if (format == 's')
+ {
+ struct type *char_type = NULL;
+ /* Search for "char16_t" or "char32_t" types or fall back to 8-bit
char
+ if type is not found. */
+ if (size == 'h')
+ char_type = builtin_type (next_gdbarch)->builtin_char16;
+ else if (size == 'w')
+ char_type = builtin_type (next_gdbarch)->builtin_char32;
+ if (char_type)
+ val_type = char_type;
+ else
+ {
+ if (size != '\0' && size != 'b')
+ warning (_("Unable to display strings with size '%c', using 'b'
\
+instead."), size);
+ size = 'b';
+ val_type = builtin_type (next_gdbarch)->builtin_int8;
+ }
+ }
+
maxelts = 8;
if (size == 'w')
maxelts = 4;
@@ -1412,8 +1440,11 @@ x_command (char *exp, int from_tty)
do_examine (fmt, next_gdbarch, next_address);
/* If the examine succeeds, we remember its size and format for next
- time. */
- last_size = fmt.size;
+ time. Set last_size to 'b' for strings. */
+ if (fmt.format == 's')
+ last_size = 'b';
+ else
+ last_size = fmt.size;
last_format = fmt.format;
/* Set a couple of internal variables if appropriate. */
Index: src/gdb/doc/gdb.texinfo
===================================================================
RCS file: /cvs/src/src/gdb/doc/gdb.texinfo,v
retrieving revision 1.696
diff -u -p -r1.696 gdb.texinfo
--- src/gdb/doc/gdb.texinfo 5 Apr 2010 17:14:57 -0000 1.696
+++ src/gdb/doc/gdb.texinfo 5 Apr 2010 22:53:53 -0000
@@ -7236,8 +7236,14 @@ Giant words (eight bytes).
@end table
Each time you specify a unit size with @code{x}, that size becomes the
-default unit the next time you use @code{x}. (For the @samp{s} and
-@samp{i} formats, the unit size is ignored and is normally not written.)
+default unit the next time you use @code{x}. For the @samp{i} format,
+the unit size is ignored and is normally not written. For the @samp{s}
format,
+the unit size defaults to @samp{b}, unless it is explicitly given.
+Use @kbd{x /hs} to display 16-bit char strings and @kbd{x /ws} to display
+32-bit strings. The next use of @kbd{x /s} will again display 8-bit
strings.
+Note that the display may vary with current language. If current language
is
+C, @samp{h} (respectively @samp{w}) modifier will use UTF-16 charset
+(respectively UTF-32 charset). These charsets can not be modified.
@item @var{addr}, starting display address
@var{addr} is the address where you want @value{GDBN} to begin displaying
Index: src/gdb/testsuite/gdb.base/charset.c
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/charset.c,v
retrieving revision 1.12
diff -u -p -r1.12 charset.c
--- src/gdb/testsuite/gdb.base/charset.c 1 Jan 2010 07:32:00 -0000
1.12
+++ src/gdb/testsuite/gdb.base/charset.c 5 Apr 2010 22:53:54 -0000
@@ -65,6 +65,9 @@ typedef unsigned int char32_t;
char16_t uvar;
char32_t Uvar;
+char16_t *String16;
+char32_t *String32;
+
/* A typedef to a typedef should also work. */
typedef wchar_t my_wchar_t;
my_wchar_t myvar;
Index: src/gdb/testsuite/gdb.base/charset.exp
===================================================================
RCS file: /cvs/src/src/gdb/testsuite/gdb.base/charset.exp,v
retrieving revision 1.21
diff -u -p -r1.21 charset.exp
--- src/gdb/testsuite/gdb.base/charset.exp 17 Feb 2010 22:05:58 -0000
1.21
+++ src/gdb/testsuite/gdb.base/charset.exp 5 Apr 2010 22:53:54 -0000
@@ -616,4 +616,21 @@ gdb_test "print 'a' == 'a' || 'b' == 'b'
".* = 1" \
"EVAL_SKIP cleanup handling regression test"
+
+proc string_display { var_name set_prefix x_size x_type} {
+ gdb_test "set ${var_name} = ${set_prefix}\"Test String\\0with zeroes\""
"" "Assign ${var_name} with prefix ${set_prefix}"
+ gdb_test "x /2${x_size}s ${var_name}" ".* ${x_type}\"Test
String\"\[\r\n\]+.* ${x_type}\"with zeroes\"" "Display String ${var_name}
with x/${x_size}s"
+}
+
+string_display String16 u h u
+if {$wchar_size == 2} {
+ string_display String16 L h u
+}
+
+string_display String32 U w U
+if {$wchar_size == 4} {
+ string_display String32 L w U
+}
+
+
gdb_exit
next prev parent reply other threads:[~2010-04-05 23:01 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <11484.4708740295$1268865815@news.gmane.org>
2010-03-18 22:08 ` [RFC] " Tom Tromey
2010-03-19 7:32 ` Eli Zaretskii
2010-03-22 22:54 ` Pierre Muller
[not found] ` <15103.6087111153$1269298497@news.gmane.org>
2010-03-30 20:33 ` Tom Tromey
2010-03-31 16:11 ` [RFC-v2] " Pierre Muller
[not found] ` <006101cad0ec$cb7915d0$626b4170$%muller@ics-cnrs.unistra.fr>
2010-03-31 16:17 ` Eli Zaretskii
2010-04-01 9:34 ` Pierre Muller
[not found] ` <000f01cad17e$7686f140$6394d3c0$%muller@ics-cnrs.unistra.fr>
2010-04-01 13:17 ` Eli Zaretskii
2010-04-05 23:01 ` Pierre Muller [this message]
[not found] ` <002701cad513$e44a7420$acdf5c60$%muller@ics-cnrs.unistra.fr>
2010-04-06 17:51 ` Eli Zaretskii
2010-04-08 20:58 ` [RFA-v3] " Pierre Muller
2010-04-16 8:41 ` [PING] " Pierre Muller
[not found] ` <48335.255837492$1271407316@news.gmane.org>
2010-04-21 22:49 ` Tom Tromey
2010-04-21 23:22 ` Pierre Muller
2010-06-11 17:38 ` Ulrich Weigand
2010-07-02 19:09 ` Tom Tromey
2010-07-05 10:17 ` Ulrich Weigand
2010-07-20 20:13 ` [patch] testsuite: regression on failed charset.exp compilation [Re: [RFA-v3] Allow explicit 16 or 32 char in 'x /s'] Jan Kratochvil
2010-07-20 22:00 ` Tom Tromey
2010-07-20 22:13 ` Jan Kratochvil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002701cad513$e44a7420$acdf5c60$@muller@ics-cnrs.unistra.fr' \
--to=pierre.muller@ics-cnrs.unistra.fr \
--cc=eliz@gnu.org \
--cc=gdb-patches@sourceware.org \
--cc=tromey@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).