* [PATCH v8 5/7] Support software single step on ARM in GDBServer
2015-12-17 14:14 [PATCH v8 0/7] Support software single step and conditional breakpoints on ARM in GDBServer Antoine Tremblay
2015-12-17 14:15 ` [PATCH v8 7/7] Enable conditional breakpoints for targets that support software single step " Antoine Tremblay
2015-12-17 14:15 ` [PATCH v8 1/7] Replace breakpoint_reinsert_addr by get_next_pcs operation " Antoine Tremblay
@ 2015-12-17 14:15 ` Antoine Tremblay
2015-12-21 13:58 ` Yao Qi
` (3 more replies)
2015-12-17 14:15 ` [PATCH v8 2/7] Share some ARM target dependent code from GDB with GDBServer Antoine Tremblay
` (5 subsequent siblings)
8 siblings, 4 replies; 25+ messages in thread
From: Antoine Tremblay @ 2015-12-17 14:15 UTC (permalink / raw)
To: gdb-patches; +Cc: Antoine Tremblay
This patch teaches GDBServer how to software single step on ARM
linux by sharing code with GDB.
The arm_get_next_pcs function in GDB is now shared with GDBServer. So
that GDBServer can use the function to return the possible addresses of
the next PC.
A proper shared context was also needed so that we could share the code,
this context is described in the arm_get_next_pcs structure.
Testing :
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o,
arm-linux.o.
(ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* arch/arm-get-next-pcs.c: New file.
* arch/arm-get-next-pcs.h: New file.
* arch/arm-linux.h: New file.
* arch/arm-linux.c: New file.
* arm.c: Include common-regcache.c.
(thumb_advance_itstate): Moved from arm-tdep.c.
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm.h (submask): Move macro from arm-tdep.h
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_advance_itstate): Moved declaration from arm-tdep.h
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h
arch/arm-linux.h.
(arm_linux_get_next_pcs_ops): New struct.
(ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT,
ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT,
ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack
layout defines to arch/arm-linux.h.
(arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c.
(arm_linux_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.c: Include arch/arm-get-next-pcs.h.
(arm_get_next_pcs_ops): New struct.
(submask): Move macro to arm.h.
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_instruction_changes_pc): Move to arm.c
(thumb2_instruction_changes_pc): Likewise.
(arm_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
(thumb_advance_itstate): Likewise.
(thumb_get_next_pc_raw): Move to arm-get-next-pcs.c.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_get_next_pcs_read_memory_unsigned_integer): New function.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.h: (arm_get_next_pc): Remove declaration.
(arm_get_next_pcs_read_memory_unsigned_integer):
New declaration.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_deal_with_atomic_sequence: Remove declaration.
* common/gdb_vecs.h: Add CORE_ADDR vector definition.
* configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o,
arm-linux.o.
(arm*-wince-pe): Add arm-get-next-pcs.o.
(arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o,
arm-get-next-pcs.o
(arm*-*-netbsd*,arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o.
(arm*-*-openbsd*): Likewise.
(arm*-*-symbianelf*): Likewise.
(arm*-*-*): Likewise.
* symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append arch/arm-linux.c,
arch/arm-get-next-pcs.c.
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o,
arm-linux.o.
* linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved
to linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Make non-static.
* linux-aarch32-low.h (arm_abi_breakpoint): New macro. Moved
from linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): New declaration.
* linux-arm-low.c: Include arch/arm-linux.h
aarch/arm-get-next-pcs.h, sys/syscall.h.
(get_next_pcs_ops): New struct.
(get_next_pcs_addr_bits_remove): New function.
(get_next_pcs_is_thumb): New function.
(get_next_pcs_read_memory_unsigned_integer): Likewise.
(arm_sigreturn_next_pc): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
(arm_gdbserver_get_next_pcs): Likewise.
(struct linux_target_ops) <arm_gdbserver_get_next_pcs>:
Initialize.
* linux-low.h: Move CORE_ADDR vector definition to gdb_vecs.h.
* server.h: Include gdb_vecs.h.
---
gdb/Makefile.in | 16 +-
gdb/arch/arm-get-next-pcs.c | 926 +++++++++++++++++++++++
gdb/arch/arm-get-next-pcs.h | 70 ++
gdb/arch/arm-linux.c | 57 ++
gdb/arch/arm-linux.h | 74 ++
gdb/arch/arm.c | 284 +++++++
gdb/arch/arm.h | 34 +
gdb/arm-linux-tdep.c | 133 +---
gdb/arm-tdep.c | 1495 +++++--------------------------------
gdb/arm-tdep.h | 18 +-
gdb/common/gdb_vecs.h | 2 +
gdb/configure.tgt | 20 +-
gdb/gdbserver/Makefile.in | 9 +-
gdb/gdbserver/configure.srv | 2 +
gdb/gdbserver/linux-aarch32-low.c | 23 +-
gdb/gdbserver/linux-aarch32-low.h | 23 +
gdb/gdbserver/linux-arm-low.c | 146 +++-
gdb/gdbserver/linux-low.h | 2 -
gdb/gdbserver/server.h | 1 +
gdb/symtab.h | 2 -
20 files changed, 1892 insertions(+), 1445 deletions(-)
create mode 100644 gdb/arch/arm-get-next-pcs.c
create mode 100644 gdb/arch/arm-get-next-pcs.h
create mode 100644 gdb/arch/arm-linux.c
create mode 100644 gdb/arch/arm-linux.h
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index 014df44..c07baad 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -657,7 +657,8 @@ ALL_64_TARGET_OBS = \
# All other target-dependent objects files (used with --enable-targets=all).
ALL_TARGET_OBS = \
- armbsd-tdep.o arm.o arm-linux-tdep.o arm-symbian-tdep.o \
+ armbsd-tdep.o arm.o arm-linux.o arm-linux-tdep.o \
+ arm-get-next-pcs.o arm-symbian-tdep.o \
armnbsd-tdep.o armobsd-tdep.o \
arm-tdep.o arm-wince-tdep.o \
avr-tdep.o \
@@ -1661,8 +1662,9 @@ ALLDEPFILES = \
amd64-dicos-tdep.c \
amd64-linux-nat.c amd64-linux-tdep.c \
amd64-sol2-tdep.c \
- arm.c \
- arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
+ arm.c arm-get-next-pcs.c \
+ arm-linux.c arm-linux-nat.c arm-linux-tdep.c \
+ arm-symbian-tdep.c arm-tdep.c \
armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
avr-tdep.c \
bfin-linux-tdep.c bfin-tdep.c \
@@ -2292,6 +2294,14 @@ arm.o: ${srcdir}/arch/arm.c
$(COMPILE) $(srcdir)/arch/arm.c
$(POSTCOMPILE)
+arm-linux.o: ${srcdir}/arch/arm-linux.c
+ $(COMPILE) $(srcdir)/arch/arm-linux.c
+ $(POSTCOMPILE)
+
+arm-get-next-pcs.o: ${srcdir}/arch/arm-get-next-pcs.c
+ $(COMPILE) $(srcdir)/arch/arm-get-next-pcs.c
+ $(POSTCOMPILE)
+
# gdb/nat/ dependencies
#
# Need to explicitly specify the compile rule as make will do nothing
diff --git a/gdb/arch/arm-get-next-pcs.c b/gdb/arch/arm-get-next-pcs.c
new file mode 100644
index 0000000..59ea228
--- /dev/null
+++ b/gdb/arch/arm-get-next-pcs.c
@@ -0,0 +1,926 @@
+/* Common code for ARM software single stepping support.
+
+ Copyright (C) 1988-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "common-defs.h"
+#include "gdb_vecs.h"
+#include "common-regcache.h"
+#include "arm.h"
+#include "arm-get-next-pcs.h"
+
+/* See arm-get-next-pcs.h. */
+
+void
+arm_get_next_pcs_ctor (struct arm_get_next_pcs *self,
+ struct arm_get_next_pcs_ops *ops,
+ int byte_order,
+ int byte_order_for_code,
+ const gdb_byte *arm_thumb2_breakpoint,
+ struct regcache *regcache)
+{
+ self->ops = ops;
+ self->byte_order = byte_order;
+ self->byte_order_for_code = byte_order_for_code;
+ self->arm_thumb2_breakpoint = arm_thumb2_breakpoint;
+ self->regcache = regcache;
+}
+
+/* Checks for an atomic sequence of instructions beginning with a LDREX{,B,H,D}
+ instruction and ending with a STREX{,B,H,D} instruction. If such a sequence
+ is found, attempt to step through it. The end of the sequence address is
+ added to the next_pcs list. */
+
+static VEC (CORE_ADDR) *
+thumb_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc)
+{
+ int byte_order_for_code = self->byte_order_for_code;
+ CORE_ADDR breaks[2] = {-1, -1};
+ CORE_ADDR loc = pc;
+ unsigned short insn1, insn2;
+ int insn_count;
+ int index;
+ int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
+ const int atomic_sequence_length = 16; /* Instruction sequence length. */
+ ULONGEST status, itstate;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+
+ /* We currently do not support atomic sequences within an IT block. */
+ status = regcache_raw_get_unsigned (self->regcache, ARM_PS_REGNUM);
+ itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
+ if (itstate & 0x0f)
+ return NULL;
+
+ /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction. */
+ insn1 = self->ops->read_mem_uint (loc, 2, byte_order_for_code);
+
+ loc += 2;
+ if (thumb_insn_size (insn1) != 4)
+ return NULL;
+
+ insn2 = self->ops->read_mem_uint (loc, 2, byte_order_for_code);
+
+ loc += 2;
+ if (!((insn1 & 0xfff0) == 0xe850
+ || ((insn1 & 0xfff0) == 0xe8d0 && (insn2 & 0x00c0) == 0x0040)))
+ return NULL;
+
+ /* Assume that no atomic sequence is longer than "atomic_sequence_length"
+ instructions. */
+ for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
+ {
+ insn1 = self->ops->read_mem_uint (loc, 2,byte_order_for_code);
+ loc += 2;
+
+ if (thumb_insn_size (insn1) != 4)
+ {
+ /* Assume that there is at most one conditional branch in the
+ atomic sequence. If a conditional branch is found, put a
+ breakpoint in its destination address. */
+ if ((insn1 & 0xf000) == 0xd000 && bits (insn1, 8, 11) != 0x0f)
+ {
+ if (last_breakpoint > 0)
+ return NULL; /* More than one conditional branch found,
+ fallback to the standard code. */
+
+ breaks[1] = loc + 2 + (sbits (insn1, 0, 7) << 1);
+ last_breakpoint++;
+ }
+
+ /* We do not support atomic sequences that use any *other*
+ instructions but conditional branches to change the PC.
+ Fall back to standard code to avoid losing control of
+ execution. */
+ else if (thumb_instruction_changes_pc (insn1))
+ return NULL;
+ }
+ else
+ {
+ insn2 = self->ops->read_mem_uint (loc, 2, byte_order_for_code);
+
+ loc += 2;
+
+ /* Assume that there is at most one conditional branch in the
+ atomic sequence. If a conditional branch is found, put a
+ breakpoint in its destination address. */
+ if ((insn1 & 0xf800) == 0xf000
+ && (insn2 & 0xd000) == 0x8000
+ && (insn1 & 0x0380) != 0x0380)
+ {
+ int sign, j1, j2, imm1, imm2;
+ unsigned int offset;
+
+ sign = sbits (insn1, 10, 10);
+ imm1 = bits (insn1, 0, 5);
+ imm2 = bits (insn2, 0, 10);
+ j1 = bit (insn2, 13);
+ j2 = bit (insn2, 11);
+
+ offset = (sign << 20) + (j2 << 19) + (j1 << 18);
+ offset += (imm1 << 12) + (imm2 << 1);
+
+ if (last_breakpoint > 0)
+ return 0; /* More than one conditional branch found,
+ fallback to the standard code. */
+
+ breaks[1] = loc + offset;
+ last_breakpoint++;
+ }
+
+ /* We do not support atomic sequences that use any *other*
+ instructions but conditional branches to change the PC.
+ Fall back to standard code to avoid losing control of
+ execution. */
+ else if (thumb2_instruction_changes_pc (insn1, insn2))
+ return NULL;
+
+ /* If we find a strex{,b,h,d}, we're done. */
+ if ((insn1 & 0xfff0) == 0xe840
+ || ((insn1 & 0xfff0) == 0xe8c0 && (insn2 & 0x00c0) == 0x0040))
+ break;
+ }
+ }
+
+ /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
+ if (insn_count == atomic_sequence_length)
+ return NULL;
+
+ /* Insert a breakpoint right after the end of the atomic sequence. */
+ breaks[0] = loc;
+
+ /* Check for duplicated breakpoints. Check also for a breakpoint
+ placed (branch instruction's destination) anywhere in sequence. */
+ if (last_breakpoint
+ && (breaks[1] == breaks[0]
+ || (breaks[1] >= pc && breaks[1] < loc)))
+ last_breakpoint = 0;
+
+ /* Adds the breakpoints to the list to be inserted. */
+ for (index = 0; index <= last_breakpoint; index++)
+ VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (breaks[index]));
+
+ return next_pcs;
+}
+
+/* Checks for an atomic sequence of instructions beginning with a LDREX{,B,H,D}
+ instruction and ending with a STREX{,B,H,D} instruction. If such a sequence
+ is found, attempt to step through it. The end of the sequence address is
+ added to the next_pcs list. */
+
+static VEC (CORE_ADDR) *
+arm_deal_with_atomic_sequence_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc)
+{
+ int byte_order_for_code = self->byte_order_for_code;
+ CORE_ADDR breaks[2] = {-1, -1};
+ CORE_ADDR loc = pc;
+ unsigned int insn;
+ int insn_count;
+ int index;
+ int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
+ const int atomic_sequence_length = 16; /* Instruction sequence length. */
+ VEC (CORE_ADDR) *next_pcs = NULL;
+
+ /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction.
+ Note that we do not currently support conditionally executed atomic
+ instructions. */
+ insn = self->ops->read_mem_uint (loc, 4, byte_order_for_code);
+
+ loc += 4;
+ if ((insn & 0xff9000f0) != 0xe1900090)
+ return NULL;
+
+ /* Assume that no atomic sequence is longer than "atomic_sequence_length"
+ instructions. */
+ for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
+ {
+ insn = self->ops->read_mem_uint (loc, 4, byte_order_for_code);
+
+ loc += 4;
+
+ /* Assume that there is at most one conditional branch in the atomic
+ sequence. If a conditional branch is found, put a breakpoint in
+ its destination address. */
+ if (bits (insn, 24, 27) == 0xa)
+ {
+ if (last_breakpoint > 0)
+ return NULL; /* More than one conditional branch found, fallback
+ to the standard single-step code. */
+
+ breaks[1] = BranchDest (loc - 4, insn);
+ last_breakpoint++;
+ }
+
+ /* We do not support atomic sequences that use any *other* instructions
+ but conditional branches to change the PC. Fall back to standard
+ code to avoid losing control of execution. */
+ else if (arm_instruction_changes_pc (insn))
+ return NULL;
+
+ /* If we find a strex{,b,h,d}, we're done. */
+ if ((insn & 0xff9000f0) == 0xe1800090)
+ break;
+ }
+
+ /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
+ if (insn_count == atomic_sequence_length)
+ return NULL;
+
+ /* Insert a breakpoint right after the end of the atomic sequence. */
+ breaks[0] = loc;
+
+ /* Check for duplicated breakpoints. Check also for a breakpoint
+ placed (branch instruction's destination) anywhere in sequence. */
+ if (last_breakpoint
+ && (breaks[1] == breaks[0]
+ || (breaks[1] >= pc && breaks[1] < loc)))
+ last_breakpoint = 0;
+
+ /* Adds the breakpoints to the list to be inserted. */
+ for (index = 0; index <= last_breakpoint; index++)
+ VEC_safe_push (CORE_ADDR, next_pcs, breaks[index]);
+
+ return next_pcs;
+}
+
+/* See arm-get-next-pcs.h. */
+
+VEC (CORE_ADDR) *
+arm_get_next_pcs (struct arm_get_next_pcs *self, CORE_ADDR pc)
+{
+ VEC (CORE_ADDR) *next_pcs = NULL;
+
+ if (self->ops->is_thumb (self))
+ {
+ next_pcs = thumb_deal_with_atomic_sequence_raw (self, pc);
+ if (next_pcs == NULL)
+ next_pcs = thumb_get_next_pcs_raw (self, pc);
+ }
+ else
+ {
+ next_pcs = arm_deal_with_atomic_sequence_raw (self, pc);
+ if (next_pcs == NULL)
+ next_pcs = arm_get_next_pcs_raw (self, pc);
+ }
+
+ return next_pcs;
+}
+
+/* See arm-get-next-pcs.h. */
+
+VEC (CORE_ADDR) *
+thumb_get_next_pcs_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc)
+{
+ int byte_order = self->byte_order;
+ int byte_order_for_code = self->byte_order_for_code;
+ unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */
+ unsigned short inst1;
+ CORE_ADDR nextpc = pc + 2; /* Default is next instruction. */
+ unsigned long offset;
+ ULONGEST status, itstate;
+ struct regcache *regcache = self->regcache;
+ VEC (CORE_ADDR) * next_pcs = NULL;
+
+ nextpc = MAKE_THUMB_ADDR (nextpc);
+ pc_val = MAKE_THUMB_ADDR (pc_val);
+
+ inst1 = self->ops->read_mem_uint (pc, 2, byte_order_for_code);
+
+ /* Thumb-2 conditional execution support. There are eight bits in
+ the CPSR which describe conditional execution state. Once
+ reconstructed (they're in a funny order), the low five bits
+ describe the low bit of the condition for each instruction and
+ how many instructions remain. The high three bits describe the
+ base condition. One of the low four bits will be set if an IT
+ block is active. These bits read as zero on earlier
+ processors. */
+ status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
+ itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
+
+ /* If-Then handling. On GNU/Linux, where this routine is used, we
+ use an undefined instruction as a breakpoint. Unlike BKPT, IT
+ can disable execution of the undefined instruction. So we might
+ miss the breakpoint if we set it on a skipped conditional
+ instruction. Because conditional instructions can change the
+ flags, affecting the execution of further instructions, we may
+ need to set two breakpoints. */
+
+ if (self->arm_thumb2_breakpoint != NULL)
+ {
+ if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
+ {
+ /* An IT instruction. Because this instruction does not
+ modify the flags, we can accurately predict the next
+ executed instruction. */
+ itstate = inst1 & 0x00ff;
+ pc += thumb_insn_size (inst1);
+
+ while (itstate != 0 && ! condition_true (itstate >> 4, status))
+ {
+ inst1 = self->ops->read_mem_uint (pc, 2,byte_order_for_code);
+ pc += thumb_insn_size (inst1);
+ itstate = thumb_advance_itstate (itstate);
+ }
+
+ VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+ return next_pcs;
+ }
+ else if (itstate != 0)
+ {
+ /* We are in a conditional block. Check the condition. */
+ if (! condition_true (itstate >> 4, status))
+ {
+ /* Advance to the next executed instruction. */
+ pc += thumb_insn_size (inst1);
+ itstate = thumb_advance_itstate (itstate);
+
+ while (itstate != 0 && ! condition_true (itstate >> 4, status))
+ {
+ inst1 = self->ops->read_mem_uint (pc, 2, byte_order_for_code);
+
+ pc += thumb_insn_size (inst1);
+ itstate = thumb_advance_itstate (itstate);
+ }
+
+ VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+ return next_pcs;
+ }
+ else if ((itstate & 0x0f) == 0x08)
+ {
+ /* This is the last instruction of the conditional
+ block, and it is executed. We can handle it normally
+ because the following instruction is not conditional,
+ and we must handle it normally because it is
+ permitted to branch. Fall through. */
+ }
+ else
+ {
+ int cond_negated;
+
+ /* There are conditional instructions after this one.
+ If this instruction modifies the flags, then we can
+ not predict what the next executed instruction will
+ be. Fortunately, this instruction is architecturally
+ forbidden to branch; we know it will fall through.
+ Start by skipping past it. */
+ pc += thumb_insn_size (inst1);
+ itstate = thumb_advance_itstate (itstate);
+
+ /* Set a breakpoint on the following instruction. */
+ gdb_assert ((itstate & 0x0f) != 0);
+ VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+
+ cond_negated = (itstate >> 4) & 1;
+
+ /* Skip all following instructions with the same
+ condition. If there is a later instruction in the IT
+ block with the opposite condition, set the other
+ breakpoint there. If not, then set a breakpoint on
+ the instruction after the IT block. */
+ do
+ {
+ inst1 = self->ops->read_mem_uint (pc, 2, byte_order_for_code);
+ pc += thumb_insn_size (inst1);
+ itstate = thumb_advance_itstate (itstate);
+ }
+ while (itstate != 0 && ((itstate >> 4) & 1) == cond_negated);
+
+ VEC_safe_push (CORE_ADDR, next_pcs, MAKE_THUMB_ADDR (pc));
+
+ return next_pcs;
+ }
+ }
+ }
+ else if (itstate & 0x0f)
+ {
+ /* We are in a conditional block. Check the condition. */
+ int cond = itstate >> 4;
+
+ if (! condition_true (cond, status))
+ {
+ /* Advance to the next instruction. All the 32-bit
+ instructions share a common prefix. */
+ VEC_safe_push (CORE_ADDR, next_pcs,
+ MAKE_THUMB_ADDR (pc + thumb_insn_size (inst1)));
+ }
+
+ return next_pcs;
+
+ /* Otherwise, handle the instruction normally. */
+ }
+
+ if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */
+ {
+ CORE_ADDR sp;
+
+ /* Fetch the saved PC from the stack. It's stored above
+ all of the other registers. */
+ offset = bitcount (bits (inst1, 0, 7)) * INT_REGISTER_SIZE;
+ sp = regcache_raw_get_unsigned (regcache, ARM_SP_REGNUM);
+ nextpc = self->ops->read_mem_uint (sp + offset, 4, byte_order);
+ }
+ else if ((inst1 & 0xf000) == 0xd000) /* conditional branch */
+ {
+ unsigned long cond = bits (inst1, 8, 11);
+ if (cond == 0x0f) /* 0x0f = SWI */
+ {
+ nextpc = self->ops->syscall_next_pc (self, pc);
+ }
+ else if (cond != 0x0f && condition_true (cond, status))
+ nextpc = pc_val + (sbits (inst1, 0, 7) << 1);
+ }
+ else if ((inst1 & 0xf800) == 0xe000) /* unconditional branch */
+ {
+ nextpc = pc_val + (sbits (inst1, 0, 10) << 1);
+ }
+ else if (thumb_insn_size (inst1) == 4) /* 32-bit instruction */
+ {
+ unsigned short inst2;
+ inst2 = self->ops->read_mem_uint (pc + 2, 2, byte_order_for_code);
+
+ /* Default to the next instruction. */
+ nextpc = pc + 4;
+ nextpc = MAKE_THUMB_ADDR (nextpc);
+
+ if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
+ {
+ /* Branches and miscellaneous control instructions. */
+
+ if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
+ {
+ /* B, BL, BLX. */
+ int j1, j2, imm1, imm2;
+
+ imm1 = sbits (inst1, 0, 10);
+ imm2 = bits (inst2, 0, 10);
+ j1 = bit (inst2, 13);
+ j2 = bit (inst2, 11);
+
+ offset = ((imm1 << 12) + (imm2 << 1));
+ offset ^= ((!j2) << 22) | ((!j1) << 23);
+
+ nextpc = pc_val + offset;
+ /* For BLX make sure to clear the low bits. */
+ if (bit (inst2, 12) == 0)
+ nextpc = nextpc & 0xfffffffc;
+ }
+ else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
+ {
+ /* SUBS PC, LR, #imm8. */
+ nextpc = regcache_raw_get_unsigned (regcache, ARM_LR_REGNUM);
+ nextpc -= inst2 & 0x00ff;
+ }
+ else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
+ {
+ /* Conditional branch. */
+ if (condition_true (bits (inst1, 6, 9), status))
+ {
+ int sign, j1, j2, imm1, imm2;
+
+ sign = sbits (inst1, 10, 10);
+ imm1 = bits (inst1, 0, 5);
+ imm2 = bits (inst2, 0, 10);
+ j1 = bit (inst2, 13);
+ j2 = bit (inst2, 11);
+
+ offset = (sign << 20) + (j2 << 19) + (j1 << 18);
+ offset += (imm1 << 12) + (imm2 << 1);
+
+ nextpc = pc_val + offset;
+ }
+ }
+ }
+ else if ((inst1 & 0xfe50) == 0xe810)
+ {
+ /* Load multiple or RFE. */
+ int rn, offset, load_pc = 1;
+
+ rn = bits (inst1, 0, 3);
+ if (bit (inst1, 7) && !bit (inst1, 8))
+ {
+ /* LDMIA or POP */
+ if (!bit (inst2, 15))
+ load_pc = 0;
+ offset = bitcount (inst2) * 4 - 4;
+ }
+ else if (!bit (inst1, 7) && bit (inst1, 8))
+ {
+ /* LDMDB */
+ if (!bit (inst2, 15))
+ load_pc = 0;
+ offset = -4;
+ }
+ else if (bit (inst1, 7) && bit (inst1, 8))
+ {
+ /* RFEIA */
+ offset = 0;
+ }
+ else if (!bit (inst1, 7) && !bit (inst1, 8))
+ {
+ /* RFEDB */
+ offset = -8;
+ }
+ else
+ load_pc = 0;
+
+ if (load_pc)
+ {
+ CORE_ADDR addr = regcache_raw_get_unsigned (regcache, rn);
+ nextpc = self->ops->read_mem_uint (addr + offset, 4, byte_order);
+ }
+ }
+ else if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
+ {
+ /* MOV PC or MOVS PC. */
+ nextpc = regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
+ nextpc = MAKE_THUMB_ADDR (nextpc);
+ }
+ else if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
+ {
+ /* LDR PC. */
+ CORE_ADDR base;
+ int rn, load_pc = 1;
+
+ rn = bits (inst1, 0, 3);
+ base = regcache_raw_get_unsigned (regcache, rn);
+ if (rn == ARM_PC_REGNUM)
+ {
+ base = (base + 4) & ~(CORE_ADDR) 0x3;
+ if (bit (inst1, 7))
+ base += bits (inst2, 0, 11);
+ else
+ base -= bits (inst2, 0, 11);
+ }
+ else if (bit (inst1, 7))
+ base += bits (inst2, 0, 11);
+ else if (bit (inst2, 11))
+ {
+ if (bit (inst2, 10))
+ {
+ if (bit (inst2, 9))
+ base += bits (inst2, 0, 7);
+ else
+ base -= bits (inst2, 0, 7);
+ }
+ }
+ else if ((inst2 & 0x0fc0) == 0x0000)
+ {
+ int shift = bits (inst2, 4, 5), rm = bits (inst2, 0, 3);
+ base += regcache_raw_get_unsigned (regcache, rm) << shift;
+ }
+ else
+ /* Reserved. */
+ load_pc = 0;
+
+ if (load_pc)
+ nextpc
+ = self->ops->read_mem_uint (base, 4, byte_order);
+ }
+ else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
+ {
+ /* TBB. */
+ CORE_ADDR tbl_reg, table, offset, length;
+
+ tbl_reg = bits (inst1, 0, 3);
+ if (tbl_reg == 0x0f)
+ table = pc + 4; /* Regcache copy of PC isn't right yet. */
+ else
+ table = regcache_raw_get_unsigned (regcache, tbl_reg);
+
+ offset = regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
+ length = 2 * self->ops->read_mem_uint (table + offset, 1, byte_order);
+ nextpc = pc_val + length;
+ }
+ else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
+ {
+ /* TBH. */
+ CORE_ADDR tbl_reg, table, offset, length;
+
+ tbl_reg = bits (inst1, 0, 3);
+ if (tbl_reg == 0x0f)
+ table = pc + 4; /* Regcache copy of PC isn't right yet. */
+ else
+ table = regcache_raw_get_unsigned (regcache, tbl_reg);
+
+ offset = 2 * regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
+ length = 2 * self->ops->read_mem_uint (table + offset, 2, byte_order);
+ nextpc = pc_val + length;
+ }
+ }
+ else if ((inst1 & 0xff00) == 0x4700) /* bx REG, blx REG */
+ {
+ if (bits (inst1, 3, 6) == 0x0f)
+ nextpc = UNMAKE_THUMB_ADDR (pc_val);
+ else
+ nextpc = regcache_raw_get_unsigned (regcache, bits (inst1, 3, 6));
+ }
+ else if ((inst1 & 0xff87) == 0x4687) /* mov pc, REG */
+ {
+ if (bits (inst1, 3, 6) == 0x0f)
+ nextpc = pc_val;
+ else
+ nextpc = regcache_raw_get_unsigned (regcache, bits (inst1, 3, 6));
+
+ nextpc = MAKE_THUMB_ADDR (nextpc);
+ }
+ else if ((inst1 & 0xf500) == 0xb100)
+ {
+ /* CBNZ or CBZ. */
+ int imm = (bit (inst1, 9) << 6) + (bits (inst1, 3, 7) << 1);
+ ULONGEST reg = regcache_raw_get_unsigned (regcache, bits (inst1, 0, 2));
+
+ if (bit (inst1, 11) && reg != 0)
+ nextpc = pc_val + imm;
+ else if (!bit (inst1, 11) && reg == 0)
+ nextpc = pc_val + imm;
+ }
+
+ VEC_safe_push (CORE_ADDR, next_pcs, nextpc);
+
+ return next_pcs;
+}
+
+/* Get the raw next possible addresses. PC in next_pcs is the current program
+ counter, which is assumed to be executing in ARM mode.
+
+ The values returned have the execution state of the next instruction
+ encoded in it. Use IS_THUMB_ADDR () to see whether the instruction is
+ in Thumb-State, and gdbarch_addr_bits_remove () to get the plain memory
+ address in GDB and arm_addr_bits_remove in GDBServer. */
+
+VEC (CORE_ADDR) *
+arm_get_next_pcs_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc)
+{
+ int byte_order = self->byte_order;
+ unsigned long pc_val;
+ unsigned long this_instr = 0;
+ unsigned long status;
+ CORE_ADDR nextpc;
+ struct regcache *regcache = self->regcache;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+
+ pc_val = (unsigned long) pc;
+ this_instr = self->ops->read_mem_uint (pc, 4, byte_order);
+
+ status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
+ nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */
+
+ if (bits (this_instr, 28, 31) == INST_NV)
+ switch (bits (this_instr, 24, 27))
+ {
+ case 0xa:
+ case 0xb:
+ {
+ /* Branch with Link and change to Thumb. */
+ nextpc = BranchDest (pc, this_instr);
+ nextpc |= bit (this_instr, 24) << 1;
+ nextpc = MAKE_THUMB_ADDR (nextpc);
+ break;
+ }
+ case 0xc:
+ case 0xd:
+ case 0xe:
+ /* Coprocessor register transfer. */
+ if (bits (this_instr, 12, 15) == 15)
+ error (_("Invalid update to pc in instruction"));
+ break;
+ }
+ else if (condition_true (bits (this_instr, 28, 31), status))
+ {
+ switch (bits (this_instr, 24, 27))
+ {
+ case 0x0:
+ case 0x1: /* data processing */
+ case 0x2:
+ case 0x3:
+ {
+ unsigned long operand1, operand2, result = 0;
+ unsigned long rn;
+ int c;
+
+ if (bits (this_instr, 12, 15) != 15)
+ break;
+
+ if (bits (this_instr, 22, 25) == 0
+ && bits (this_instr, 4, 7) == 9) /* multiply */
+ error (_("Invalid update to pc in instruction"));
+
+ /* BX <reg>, BLX <reg> */
+ if (bits (this_instr, 4, 27) == 0x12fff1
+ || bits (this_instr, 4, 27) == 0x12fff3)
+ {
+ rn = bits (this_instr, 0, 3);
+ nextpc = ((rn == ARM_PC_REGNUM)
+ ? (pc_val + 8)
+ : regcache_raw_get_unsigned (regcache, rn));
+
+ VEC_safe_push (CORE_ADDR, next_pcs, nextpc);
+ return next_pcs;
+ }
+
+ /* Multiply into PC. */
+ c = (status & FLAG_C) ? 1 : 0;
+ rn = bits (this_instr, 16, 19);
+ operand1 = ((rn == ARM_PC_REGNUM)
+ ? (pc_val + 8)
+ : regcache_raw_get_unsigned (regcache, rn));
+
+ if (bit (this_instr, 25))
+ {
+ unsigned long immval = bits (this_instr, 0, 7);
+ unsigned long rotate = 2 * bits (this_instr, 8, 11);
+ operand2 = ((immval >> rotate) | (immval << (32 - rotate)))
+ & 0xffffffff;
+ }
+ else /* operand 2 is a shifted register. */
+ operand2 = shifted_reg_val (regcache, this_instr, c,
+ pc_val, status);
+
+ switch (bits (this_instr, 21, 24))
+ {
+ case 0x0: /*and */
+ result = operand1 & operand2;
+ break;
+
+ case 0x1: /*eor */
+ result = operand1 ^ operand2;
+ break;
+
+ case 0x2: /*sub */
+ result = operand1 - operand2;
+ break;
+
+ case 0x3: /*rsb */
+ result = operand2 - operand1;
+ break;
+
+ case 0x4: /*add */
+ result = operand1 + operand2;
+ break;
+
+ case 0x5: /*adc */
+ result = operand1 + operand2 + c;
+ break;
+
+ case 0x6: /*sbc */
+ result = operand1 - operand2 + c;
+ break;
+
+ case 0x7: /*rsc */
+ result = operand2 - operand1 + c;
+ break;
+
+ case 0x8:
+ case 0x9:
+ case 0xa:
+ case 0xb: /* tst, teq, cmp, cmn */
+ result = (unsigned long) nextpc;
+ break;
+
+ case 0xc: /*orr */
+ result = operand1 | operand2;
+ break;
+
+ case 0xd: /*mov */
+ /* Always step into a function. */
+ result = operand2;
+ break;
+
+ case 0xe: /*bic */
+ result = operand1 & ~operand2;
+ break;
+
+ case 0xf: /*mvn */
+ result = ~operand2;
+ break;
+ }
+ nextpc = self->ops->addr_bits_remove (self, result);
+ break;
+ }
+
+ case 0x4:
+ case 0x5: /* data transfer */
+ case 0x6:
+ case 0x7:
+ if (bits (this_instr, 25, 27) == 0x3 && bit (this_instr, 4) == 1)
+ {
+ /* Media instructions and architecturally undefined
+ instructions. */
+ break;
+ }
+
+ if (bit (this_instr, 20))
+ {
+ /* load */
+ if (bits (this_instr, 12, 15) == 15)
+ {
+ /* rd == pc */
+ unsigned long rn;
+ unsigned long base;
+
+ if (bit (this_instr, 22))
+ error (_("Invalid update to pc in instruction"));
+
+ /* byte write to PC */
+ rn = bits (this_instr, 16, 19);
+ base = ((rn == ARM_PC_REGNUM)
+ ? (pc_val + 8)
+ : regcache_raw_get_unsigned (regcache, rn));
+
+ if (bit (this_instr, 24))
+ {
+ /* pre-indexed */
+ int c = (status & FLAG_C) ? 1 : 0;
+ unsigned long offset =
+ (bit (this_instr, 25)
+ ? shifted_reg_val (regcache, this_instr, c,
+ pc_val, status)
+ : bits (this_instr, 0, 11));
+
+ if (bit (this_instr, 23))
+ base += offset;
+ else
+ base -= offset;
+ }
+ nextpc
+ = (CORE_ADDR) self->ops->read_mem_uint ((CORE_ADDR) base,
+ 4, byte_order);
+ }
+ }
+ break;
+
+ case 0x8:
+ case 0x9: /* block transfer */
+ if (bit (this_instr, 20))
+ {
+ /* LDM */
+ if (bit (this_instr, 15))
+ {
+ /* loading pc */
+ int offset = 0;
+ CORE_ADDR rn_val_offset = 0;
+ unsigned long rn_val
+ = regcache_raw_get_unsigned (regcache,
+ bits (this_instr, 16, 19));
+
+ if (bit (this_instr, 23))
+ {
+ /* up */
+ unsigned long reglist = bits (this_instr, 0, 14);
+ offset = bitcount (reglist) * 4;
+ if (bit (this_instr, 24)) /* pre */
+ offset += 4;
+ }
+ else if (bit (this_instr, 24))
+ offset = -4;
+
+ rn_val_offset = rn_val + offset;
+ nextpc = (CORE_ADDR) self->ops->read_mem_uint (rn_val_offset,
+ 4, byte_order);
+ }
+ }
+ break;
+
+ case 0xb: /* branch & link */
+ case 0xa: /* branch */
+ {
+ nextpc = BranchDest (pc, this_instr);
+ break;
+ }
+
+ case 0xc:
+ case 0xd:
+ case 0xe: /* coproc ops */
+ break;
+ case 0xf: /* SWI */
+ {
+ nextpc = self->ops->syscall_next_pc (self, pc);
+ }
+ break;
+
+ default:
+ error (_("Bad bit-field extraction\n"));
+ return next_pcs;
+ }
+ }
+
+ VEC_safe_push (CORE_ADDR, next_pcs, nextpc);
+ return next_pcs;
+}
diff --git a/gdb/arch/arm-get-next-pcs.h b/gdb/arch/arm-get-next-pcs.h
new file mode 100644
index 0000000..fe48428
--- /dev/null
+++ b/gdb/arch/arm-get-next-pcs.h
@@ -0,0 +1,70 @@
+/* Common code for ARM software single stepping support.
+
+ Copyright (C) 1988-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef ARM_GET_NEXT_PCS_H
+#define ARM_GET_NEXT_PCS_H 1
+
+/* Forward declaration. */
+struct arm_get_next_pcs;
+
+/* get_next_pcs operations. */
+struct arm_get_next_pcs_ops
+{
+ ULONGEST (*read_mem_uint) (CORE_ADDR memaddr, int len, int byte_order);
+ CORE_ADDR (*syscall_next_pc) (struct arm_get_next_pcs *self, CORE_ADDR pc);
+ CORE_ADDR (*addr_bits_remove) (struct arm_get_next_pcs *self, CORE_ADDR val);
+ int (*is_thumb) (struct arm_get_next_pcs *self);
+};
+
+/* Context for a get_next_pcs call on ARM. */
+struct arm_get_next_pcs
+{
+ /* Operations implementations. */
+ struct arm_get_next_pcs_ops *ops;
+ /* Byte order for data. */
+ int byte_order;
+ /* Byte order for code. */
+ int byte_order_for_code;
+ /* Thumb2 breakpoint instruction. */
+ const gdb_byte *arm_thumb2_breakpoint;
+ /* Registry cache. */
+ struct regcache *regcache;
+};
+
+/* Initialize arm_get_next_pcs. */
+void arm_get_next_pcs_ctor (struct arm_get_next_pcs *self,
+ struct arm_get_next_pcs_ops *ops,
+ int byte_order,
+ int byte_order_for_code,
+ const gdb_byte *arm_thumb2_breakpoint,
+ struct regcache *regcache);
+
+/* Find the next possible PCs after the current instruction executes. */
+VEC (CORE_ADDR) *arm_get_next_pcs (struct arm_get_next_pcs *self,
+ CORE_ADDR pc);
+
+/* Find the next possible PCs for thumb mode. */
+VEC (CORE_ADDR) *thumb_get_next_pcs_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc);
+
+/* Find the next possible PCs for arm mode. */
+VEC (CORE_ADDR) *arm_get_next_pcs_raw (struct arm_get_next_pcs *self,
+ CORE_ADDR pc);
+
+#endif /* ARM_GET_NEXT_PCS_H */
diff --git a/gdb/arch/arm-linux.c b/gdb/arch/arm-linux.c
new file mode 100644
index 0000000..5d871e2
--- /dev/null
+++ b/gdb/arch/arm-linux.c
@@ -0,0 +1,57 @@
+/* Common target dependent code for GNU/Linux on ARM systems.
+
+ Copyright (C) 1999-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "common-defs.h"
+#include "arch/arm.h"
+#include "arm-linux.h"
+
+/* Calculate the offset from stack pointer of the pc register on the stack
+ in the case of a sigreturn or sigreturn_rt syscall. */
+int
+arm_linux_sigreturn_next_pc_offset (unsigned long sp,
+ unsigned long sp_data,
+ unsigned long svc_number,
+ int is_sigreturn)
+{
+ /* Offset of R0 register. */
+ int r0_offset = 0;
+ /* Offset of PC register. */
+ int pc_offset = 0;
+
+ if (is_sigreturn)
+ {
+ if (sp_data == ARM_NEW_SIGFRAME_MAGIC)
+ r0_offset = ARM_UCONTEXT_SIGCONTEXT + ARM_SIGCONTEXT_R0;
+ else
+ r0_offset = ARM_SIGCONTEXT_R0;
+ }
+ else
+ {
+ if (sp_data == sp + ARM_OLD_RT_SIGFRAME_SIGINFO)
+ r0_offset = ARM_OLD_RT_SIGFRAME_UCONTEXT;
+ else
+ r0_offset = ARM_NEW_RT_SIGFRAME_UCONTEXT;
+
+ r0_offset += ARM_UCONTEXT_SIGCONTEXT + ARM_SIGCONTEXT_R0;
+ }
+
+ pc_offset = r0_offset + INT_REGISTER_SIZE * ARM_PC_REGNUM;
+
+ return pc_offset;
+}
diff --git a/gdb/arch/arm-linux.h b/gdb/arch/arm-linux.h
new file mode 100644
index 0000000..2503c93
--- /dev/null
+++ b/gdb/arch/arm-linux.h
@@ -0,0 +1,74 @@
+/* Common target dependent code for GNU/Linux on ARM systems.
+
+ Copyright (C) 1999-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef ARM_LINUX_H
+#define ARM_LINUX_H
+
+/* There are a couple of different possible stack layouts that
+ we need to support.
+
+ Before version 2.6.18, the kernel used completely independent
+ layouts for non-RT and RT signals. For non-RT signals the stack
+ began directly with a struct sigcontext. For RT signals the stack
+ began with two redundant pointers (to the siginfo and ucontext),
+ and then the siginfo and ucontext.
+
+ As of version 2.6.18, the non-RT signal frame layout starts with
+ a ucontext and the RT signal frame starts with a siginfo and then
+ a ucontext. Also, the ucontext now has a designated save area
+ for coprocessor registers.
+
+ For RT signals, it's easy to tell the difference: we look for
+ pinfo, the pointer to the siginfo. If it has the expected
+ value, we have an old layout. If it doesn't, we have the new
+ layout.
+
+ For non-RT signals, it's a bit harder. We need something in one
+ layout or the other with a recognizable offset and value. We can't
+ use the return trampoline, because ARM usually uses SA_RESTORER,
+ in which case the stack return trampoline is not filled in.
+ We can't use the saved stack pointer, because sigaltstack might
+ be in use. So for now we guess the new layout... */
+
+/* There are three words (trap_no, error_code, oldmask) in
+ struct sigcontext before r0. */
+#define ARM_SIGCONTEXT_R0 0xc
+
+/* There are five words (uc_flags, uc_link, and three for uc_stack)
+ in the ucontext_t before the sigcontext. */
+#define ARM_UCONTEXT_SIGCONTEXT 0x14
+
+/* There are three elements in an rt_sigframe before the ucontext:
+ pinfo, puc, and info. The first two are pointers and the third
+ is a struct siginfo, with size 128 bytes. We could follow puc
+ to the ucontext, but it's simpler to skip the whole thing. */
+#define ARM_OLD_RT_SIGFRAME_SIGINFO 0x8
+#define ARM_OLD_RT_SIGFRAME_UCONTEXT 0x88
+
+#define ARM_NEW_RT_SIGFRAME_UCONTEXT 0x80
+
+#define ARM_NEW_SIGFRAME_MAGIC 0x5ac3c35a
+
+int
+arm_linux_sigreturn_next_pc_offset (unsigned long sp,
+ unsigned long sp_data,
+ unsigned long svc_number,
+ int is_sigreturn);
+
+#endif /* ARM_LINUX_H */
diff --git a/gdb/arch/arm.c b/gdb/arch/arm.c
index 426377f..235c8c9 100644
--- a/gdb/arch/arm.c
+++ b/gdb/arch/arm.c
@@ -18,6 +18,7 @@
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "common-defs.h"
+#include "common-regcache.h"
#include "arm.h"
/* See arm.h. */
@@ -87,3 +88,286 @@ condition_true (unsigned long cond, unsigned long status_reg)
}
return 1;
}
+
+
+/* See arm.h. */
+
+int
+thumb_advance_itstate (unsigned int itstate)
+{
+ /* Preserve IT[7:5], the first three bits of the condition. Shift
+ the upcoming condition flags left by one bit. */
+ itstate = (itstate & 0xe0) | ((itstate << 1) & 0x1f);
+
+ /* If we have finished the IT block, clear the state. */
+ if ((itstate & 0x0f) == 0)
+ itstate = 0;
+
+ return itstate;
+}
+
+/* See arm.h. */
+
+int
+arm_instruction_changes_pc (uint32_t this_instr)
+{
+ if (bits (this_instr, 28, 31) == INST_NV)
+ /* Unconditional instructions. */
+ switch (bits (this_instr, 24, 27))
+ {
+ case 0xa:
+ case 0xb:
+ /* Branch with Link and change to Thumb. */
+ return 1;
+ case 0xc:
+ case 0xd:
+ case 0xe:
+ /* Coprocessor register transfer. */
+ if (bits (this_instr, 12, 15) == 15)
+ error (_("Invalid update to pc in instruction"));
+ return 0;
+ default:
+ return 0;
+ }
+ else
+ switch (bits (this_instr, 25, 27))
+ {
+ case 0x0:
+ if (bits (this_instr, 23, 24) == 2 && bit (this_instr, 20) == 0)
+ {
+ /* Multiplies and extra load/stores. */
+ if (bit (this_instr, 4) == 1 && bit (this_instr, 7) == 1)
+ /* Neither multiplies nor extension load/stores are allowed
+ to modify PC. */
+ return 0;
+
+ /* Otherwise, miscellaneous instructions. */
+
+ /* BX <reg>, BXJ <reg>, BLX <reg> */
+ if (bits (this_instr, 4, 27) == 0x12fff1
+ || bits (this_instr, 4, 27) == 0x12fff2
+ || bits (this_instr, 4, 27) == 0x12fff3)
+ return 1;
+
+ /* Other miscellaneous instructions are unpredictable if they
+ modify PC. */
+ return 0;
+ }
+ /* Data processing instruction. Fall through. */
+
+ case 0x1:
+ if (bits (this_instr, 12, 15) == 15)
+ return 1;
+ else
+ return 0;
+
+ case 0x2:
+ case 0x3:
+ /* Media instructions and architecturally undefined instructions. */
+ if (bits (this_instr, 25, 27) == 3 && bit (this_instr, 4) == 1)
+ return 0;
+
+ /* Stores. */
+ if (bit (this_instr, 20) == 0)
+ return 0;
+
+ /* Loads. */
+ if (bits (this_instr, 12, 15) == ARM_PC_REGNUM)
+ return 1;
+ else
+ return 0;
+
+ case 0x4:
+ /* Load/store multiple. */
+ if (bit (this_instr, 20) == 1 && bit (this_instr, 15) == 1)
+ return 1;
+ else
+ return 0;
+
+ case 0x5:
+ /* Branch and branch with link. */
+ return 1;
+
+ case 0x6:
+ case 0x7:
+ /* Coprocessor transfers or SWIs can not affect PC. */
+ return 0;
+
+ default:
+ internal_error (__FILE__, __LINE__, _("bad value in switch"));
+ }
+}
+
+/* See arm.h. */
+
+int
+thumb_instruction_changes_pc (unsigned short inst)
+{
+ if ((inst & 0xff00) == 0xbd00) /* pop {rlist, pc} */
+ return 1;
+
+ if ((inst & 0xf000) == 0xd000) /* conditional branch */
+ return 1;
+
+ if ((inst & 0xf800) == 0xe000) /* unconditional branch */
+ return 1;
+
+ if ((inst & 0xff00) == 0x4700) /* bx REG, blx REG */
+ return 1;
+
+ if ((inst & 0xff87) == 0x4687) /* mov pc, REG */
+ return 1;
+
+ if ((inst & 0xf500) == 0xb100) /* CBNZ or CBZ. */
+ return 1;
+
+ return 0;
+}
+
+
+/* See arm.h. */
+
+int
+thumb2_instruction_changes_pc (unsigned short inst1, unsigned short inst2)
+{
+ if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
+ {
+ /* Branches and miscellaneous control instructions. */
+
+ if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
+ {
+ /* B, BL, BLX. */
+ return 1;
+ }
+ else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
+ {
+ /* SUBS PC, LR, #imm8. */
+ return 1;
+ }
+ else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
+ {
+ /* Conditional branch. */
+ return 1;
+ }
+
+ return 0;
+ }
+
+ if ((inst1 & 0xfe50) == 0xe810)
+ {
+ /* Load multiple or RFE. */
+
+ if (bit (inst1, 7) && !bit (inst1, 8))
+ {
+ /* LDMIA or POP */
+ if (bit (inst2, 15))
+ return 1;
+ }
+ else if (!bit (inst1, 7) && bit (inst1, 8))
+ {
+ /* LDMDB */
+ if (bit (inst2, 15))
+ return 1;
+ }
+ else if (bit (inst1, 7) && bit (inst1, 8))
+ {
+ /* RFEIA */
+ return 1;
+ }
+ else if (!bit (inst1, 7) && !bit (inst1, 8))
+ {
+ /* RFEDB */
+ return 1;
+ }
+
+ return 0;
+ }
+
+ if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
+ {
+ /* MOV PC or MOVS PC. */
+ return 1;
+ }
+
+ if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
+ {
+ /* LDR PC. */
+ if (bits (inst1, 0, 3) == 15)
+ return 1;
+ if (bit (inst1, 7))
+ return 1;
+ if (bit (inst2, 11))
+ return 1;
+ if ((inst2 & 0x0fc0) == 0x0000)
+ return 1;
+
+ return 0;
+ }
+
+ if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
+ {
+ /* TBB. */
+ return 1;
+ }
+
+ if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
+ {
+ /* TBH. */
+ return 1;
+ }
+
+ return 0;
+}
+
+/* See arm.h. */
+
+unsigned long
+shifted_reg_val (struct regcache *regcache, unsigned long inst,
+ int carry, unsigned long pc_val, unsigned long status_reg)
+{
+ unsigned long res, shift;
+ int rm = bits (inst, 0, 3);
+ unsigned long shifttype = bits (inst, 5, 6);
+
+ if (bit (inst, 4))
+ {
+ int rs = bits (inst, 8, 11);
+ shift = (rs == 15
+ ? pc_val + 8
+ : regcache_raw_get_unsigned (regcache, rs)) & 0xFF;
+ }
+ else
+ shift = bits (inst, 7, 11);
+
+ res = (rm == ARM_PC_REGNUM
+ ? (pc_val + (bit (inst, 4) ? 12 : 8))
+ : regcache_raw_get_unsigned (regcache, rm));
+
+ switch (shifttype)
+ {
+ case 0: /* LSL */
+ res = shift >= 32 ? 0 : res << shift;
+ break;
+
+ case 1: /* LSR */
+ res = shift >= 32 ? 0 : res >> shift;
+ break;
+
+ case 2: /* ASR */
+ if (shift >= 32)
+ shift = 31;
+ res = ((res & 0x80000000L)
+ ? ~((~res) >> shift) : res >> shift);
+ break;
+
+ case 3: /* ROR/RRX */
+ shift &= 31;
+ if (shift == 0)
+ res = (res >> 1) | (carry ? 0x80000000L : 0);
+ else
+ res = (res >> shift) | (res << (32 - shift));
+ break;
+ }
+
+ return res & 0xffffffff;
+}
diff --git a/gdb/arch/arm.h b/gdb/arch/arm.h
index 1a877bc..65a5531 100644
--- a/gdb/arch/arm.h
+++ b/gdb/arch/arm.h
@@ -94,6 +94,18 @@ enum gdb_regnum {
#define MAKE_THUMB_ADDR(addr) ((addr) | 1)
#define UNMAKE_THUMB_ADDR(addr) ((addr) & ~1)
+/* Support routines for instruction parsing. */
+#define submask(x) ((1L << ((x) + 1)) - 1)
+#define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st)))
+#define bit(obj,st) (((obj) >> (st)) & 1)
+#define sbits(obj,st,fn) \
+ ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st))))
+#define BranchDest(addr,instr) \
+ ((CORE_ADDR) (((unsigned long) (addr)) + 8 + (sbits (instr, 0, 23) << 2)))
+
+/* Forward declaration. */
+struct regcache;
+
/* Return the size in bytes of the complete Thumb instruction whose
first halfword is INST1. */
int thumb_insn_size (unsigned short inst1);
@@ -104,4 +116,26 @@ int condition_true (unsigned long cond, unsigned long status_reg);
/* Return number of 1-bits in VAL. */
int bitcount (unsigned long val);
+/* Return 1 if THIS_INSTR might change control flow, 0 otherwise. */
+int arm_instruction_changes_pc (uint32_t this_instr);
+
+/* Return 1 if the 16-bit Thumb instruction INST might change
+ control flow, 0 otherwise. */
+int thumb_instruction_changes_pc (unsigned short inst);
+
+/* Return 1 if the 32-bit Thumb instruction in INST1 and INST2
+ might change control flow, 0 otherwise. */
+int thumb2_instruction_changes_pc (unsigned short inst1, unsigned short inst2);
+
+/* Advance the state of the IT block and return that state. */
+int thumb_advance_itstate (unsigned int itstate);
+
+/* Decode shifted register value. */
+
+unsigned long shifted_reg_val (struct regcache *regcache,
+ unsigned long inst,
+ int carry,
+ unsigned long pc_val,
+ unsigned long status_reg);
+
#endif
diff --git a/gdb/arm-linux-tdep.c b/gdb/arm-linux-tdep.c
index e06cf77..4771dae 100644
--- a/gdb/arm-linux-tdep.c
+++ b/gdb/arm-linux-tdep.c
@@ -35,6 +35,9 @@
#include "auxv.h"
#include "xml-syscall.h"
+#include "arch/arm.h"
+#include "arch/arm-get-next-pcs.h"
+#include "arch/arm-linux.h"
#include "arm-tdep.h"
#include "arm-linux-tdep.h"
#include "linux-tdep.h"
@@ -262,6 +265,14 @@ static const gdb_byte arm_linux_thumb2_le_breakpoint[] = { 0xf0, 0xf7, 0x00, 0xa
/* Syscall number for rt_sigreturn. */
#define ARM_RT_SIGRETURN 173
+/* Operation function pointers for get_next_pcs. */
+static struct arm_get_next_pcs_ops arm_linux_get_next_pcs_ops = {
+ arm_get_next_pcs_read_memory_unsigned_integer,
+ arm_get_next_pcs_syscall_next_pc,
+ arm_get_next_pcs_addr_bits_remove,
+ arm_get_next_pcs_is_thumb
+};
+
static void
arm_linux_sigtramp_cache (struct frame_info *this_frame,
struct trad_frame_cache *this_cache,
@@ -283,51 +294,7 @@ arm_linux_sigtramp_cache (struct frame_info *this_frame,
trad_frame_set_id (this_cache, frame_id_build (sp, func));
}
-/* There are a couple of different possible stack layouts that
- we need to support.
-
- Before version 2.6.18, the kernel used completely independent
- layouts for non-RT and RT signals. For non-RT signals the stack
- began directly with a struct sigcontext. For RT signals the stack
- began with two redundant pointers (to the siginfo and ucontext),
- and then the siginfo and ucontext.
-
- As of version 2.6.18, the non-RT signal frame layout starts with
- a ucontext and the RT signal frame starts with a siginfo and then
- a ucontext. Also, the ucontext now has a designated save area
- for coprocessor registers.
-
- For RT signals, it's easy to tell the difference: we look for
- pinfo, the pointer to the siginfo. If it has the expected
- value, we have an old layout. If it doesn't, we have the new
- layout.
-
- For non-RT signals, it's a bit harder. We need something in one
- layout or the other with a recognizable offset and value. We can't
- use the return trampoline, because ARM usually uses SA_RESTORER,
- in which case the stack return trampoline is not filled in.
- We can't use the saved stack pointer, because sigaltstack might
- be in use. So for now we guess the new layout... */
-
-/* There are three words (trap_no, error_code, oldmask) in
- struct sigcontext before r0. */
-#define ARM_SIGCONTEXT_R0 0xc
-
-/* There are five words (uc_flags, uc_link, and three for uc_stack)
- in the ucontext_t before the sigcontext. */
-#define ARM_UCONTEXT_SIGCONTEXT 0x14
-
-/* There are three elements in an rt_sigframe before the ucontext:
- pinfo, puc, and info. The first two are pointers and the third
- is a struct siginfo, with size 128 bytes. We could follow puc
- to the ucontext, but it's simpler to skip the whole thing. */
-#define ARM_OLD_RT_SIGFRAME_SIGINFO 0x8
-#define ARM_OLD_RT_SIGFRAME_UCONTEXT 0x88
-
-#define ARM_NEW_RT_SIGFRAME_UCONTEXT 0x80
-
-#define ARM_NEW_SIGFRAME_MAGIC 0x5ac3c35a
-
+/* See arm-linux.h for stack layout details. */
static void
arm_linux_sigreturn_init (const struct tramp_frame *self,
struct frame_info *this_frame,
@@ -810,41 +777,6 @@ arm_linux_sigreturn_return_addr (struct frame_info *frame,
return 0;
}
-/* Calculate the offset from stack pointer of the pc register on the stack
- in the case of a sigreturn or sigreturn_rt syscall. */
-static int
-arm_linux_sigreturn_next_pc_offset (unsigned long sp,
- unsigned long sp_data,
- unsigned long svc_number,
- int is_sigreturn)
-{
- /* Offset of R0 register. */
- int r0_offset = 0;
- /* Offset of PC register. */
- int pc_offset = 0;
-
- if (is_sigreturn)
- {
- if (sp_data == ARM_NEW_SIGFRAME_MAGIC)
- r0_offset = ARM_UCONTEXT_SIGCONTEXT + ARM_SIGCONTEXT_R0;
- else
- r0_offset = ARM_SIGCONTEXT_R0;
- }
- else
- {
- if (sp_data == sp + ARM_OLD_RT_SIGFRAME_SIGINFO)
- r0_offset = ARM_OLD_RT_SIGFRAME_UCONTEXT;
- else
- r0_offset = ARM_NEW_RT_SIGFRAME_UCONTEXT;
-
- r0_offset += ARM_UCONTEXT_SIGCONTEXT + ARM_SIGCONTEXT_R0;
- }
-
- pc_offset = r0_offset + INT_REGISTER_SIZE * ARM_PC_REGNUM;
-
- return pc_offset;
-}
-
/* Find the value of the next PC after a sigreturn or rt_sigreturn syscall
based on current processor state. */
static CORE_ADDR
@@ -984,28 +916,41 @@ arm_linux_software_single_step (struct frame_info *frame)
struct regcache *regcache = get_current_regcache ();
struct gdbarch *gdbarch = get_regcache_arch (regcache);
struct address_space *aspace = get_regcache_aspace (regcache);
-
- CORE_ADDR next_pc;
-
- if (arm_deal_with_atomic_sequence (regcache))
- return 1;
+ struct arm_get_next_pcs next_pcs_ctx;
+ CORE_ADDR pc;
+ int i;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+ struct cleanup *old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
/* If the target does have hardware single step, GDB doesn't have
to bother software single step. */
if (target_can_do_single_step () == 1)
return 0;
- next_pc = arm_get_next_pc (regcache, regcache_read_pc (regcache));
+ arm_get_next_pcs_ctor (&next_pcs_ctx,
+ &arm_linux_get_next_pcs_ops,
+ gdbarch_byte_order (gdbarch),
+ gdbarch_byte_order_for_code (gdbarch),
+ gdbarch_tdep (gdbarch)->thumb2_breakpoint,
+ regcache);
+
+ next_pcs = arm_get_next_pcs (&next_pcs_ctx, regcache_read_pc (regcache));
- /* The Linux kernel offers some user-mode helpers in a high page. We can
- not read this page (as of 2.6.23), and even if we could then we couldn't
- set breakpoints in it, and even if we could then the atomic operations
- would fail when interrupted. They are all called as functions and return
- to the address in LR, so step to there instead. */
- if (next_pc > 0xffff0000)
- next_pc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);
+ for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
+ {
+ /* The Linux kernel offers some user-mode helpers in a high page. We can
+ not read this page (as of 2.6.23), and even if we could then we
+ couldn't set breakpoints in it, and even if we could then the atomic
+ operations would fail when interrupted. They are all called as
+ functions and return to the address in LR, so step to there
+ instead. */
+ if (pc > 0xffff0000)
+ pc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);
+
+ arm_insert_single_step_breakpoint (gdbarch, aspace, pc);
+ }
- arm_insert_single_step_breakpoint (gdbarch, aspace, next_pc);
+ do_cleanups (old_chain);
return 1;
}
diff --git a/gdb/arm-tdep.c b/gdb/arm-tdep.c
index ebe4c40..52ce8d5 100644
--- a/gdb/arm-tdep.c
+++ b/gdb/arm-tdep.c
@@ -46,6 +46,7 @@
#include "observer.h"
#include "arch/arm.h"
+#include "arch/arm-get-next-pcs.h"
#include "arm-tdep.h"
#include "gdb/sim-arm.h"
@@ -236,6 +237,14 @@ static void arm_neon_quad_write (struct gdbarch *gdbarch,
struct regcache *regcache,
int regnum, const gdb_byte *buf);
+/* get_next_pcs operations. */
+static struct arm_get_next_pcs_ops arm_get_next_pcs_ops = {
+ arm_get_next_pcs_read_memory_unsigned_integer,
+ arm_get_next_pcs_syscall_next_pc,
+ arm_get_next_pcs_addr_bits_remove,
+ arm_get_next_pcs_is_thumb
+};
+
struct arm_prologue_cache
{
/* The stack pointer at the time this frame was created; i.e. the
@@ -520,15 +529,6 @@ skip_prologue_function (struct gdbarch *gdbarch, CORE_ADDR pc, int is_thumb)
return 0;
}
-/* Support routines for instruction parsing. */
-#define submask(x) ((1L << ((x) + 1)) - 1)
-#define bit(obj,st) (((obj) >> (st)) & 1)
-#define bits(obj,st,fn) (((obj) >> (st)) & submask ((fn) - (st)))
-#define sbits(obj,st,fn) \
- ((long) (bits(obj,st,fn) | ((long) bit(obj,fn) * ~ submask (fn - st))))
-#define BranchDest(addr,instr) \
- ((CORE_ADDR) (((unsigned long) (addr)) + 8 + (sbits (instr, 0, 23) << 2)))
-
/* Extract the immediate from instruction movw/movt of encoding T. INSN1 is
the first 16-bit of instruction, and INSN2 is the second 16-bit of
instruction. */
@@ -568,128 +568,6 @@ thumb_expand_immediate (unsigned int imm)
return (0x80 | (imm & 0x7f)) << (32 - count);
}
-/* Return 1 if the 16-bit Thumb instruction INST might change
- control flow, 0 otherwise. */
-
-static int
-thumb_instruction_changes_pc (unsigned short inst)
-{
- if ((inst & 0xff00) == 0xbd00) /* pop {rlist, pc} */
- return 1;
-
- if ((inst & 0xf000) == 0xd000) /* conditional branch */
- return 1;
-
- if ((inst & 0xf800) == 0xe000) /* unconditional branch */
- return 1;
-
- if ((inst & 0xff00) == 0x4700) /* bx REG, blx REG */
- return 1;
-
- if ((inst & 0xff87) == 0x4687) /* mov pc, REG */
- return 1;
-
- if ((inst & 0xf500) == 0xb100) /* CBNZ or CBZ. */
- return 1;
-
- return 0;
-}
-
-/* Return 1 if the 32-bit Thumb instruction in INST1 and INST2
- might change control flow, 0 otherwise. */
-
-static int
-thumb2_instruction_changes_pc (unsigned short inst1, unsigned short inst2)
-{
- if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
- {
- /* Branches and miscellaneous control instructions. */
-
- if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
- {
- /* B, BL, BLX. */
- return 1;
- }
- else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
- {
- /* SUBS PC, LR, #imm8. */
- return 1;
- }
- else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
- {
- /* Conditional branch. */
- return 1;
- }
-
- return 0;
- }
-
- if ((inst1 & 0xfe50) == 0xe810)
- {
- /* Load multiple or RFE. */
-
- if (bit (inst1, 7) && !bit (inst1, 8))
- {
- /* LDMIA or POP */
- if (bit (inst2, 15))
- return 1;
- }
- else if (!bit (inst1, 7) && bit (inst1, 8))
- {
- /* LDMDB */
- if (bit (inst2, 15))
- return 1;
- }
- else if (bit (inst1, 7) && bit (inst1, 8))
- {
- /* RFEIA */
- return 1;
- }
- else if (!bit (inst1, 7) && !bit (inst1, 8))
- {
- /* RFEDB */
- return 1;
- }
-
- return 0;
- }
-
- if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
- {
- /* MOV PC or MOVS PC. */
- return 1;
- }
-
- if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
- {
- /* LDR PC. */
- if (bits (inst1, 0, 3) == 15)
- return 1;
- if (bit (inst1, 7))
- return 1;
- if (bit (inst2, 11))
- return 1;
- if ((inst2 & 0x0fc0) == 0x0000)
- return 1;
-
- return 0;
- }
-
- if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
- {
- /* TBB. */
- return 1;
- }
-
- if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
- {
- /* TBH. */
- return 1;
- }
-
- return 0;
-}
-
/* Return 1 if the 16-bit Thumb instruction INSN restores SP in
epilogue, 0 otherwise. */
@@ -1517,98 +1395,6 @@ thumb_scan_prologue (struct gdbarch *gdbarch, CORE_ADDR prev_pc,
thumb_analyze_prologue (gdbarch, prologue_start, prologue_end, cache);
}
-/* Return 1 if THIS_INSTR might change control flow, 0 otherwise. */
-
-static int
-arm_instruction_changes_pc (uint32_t this_instr)
-{
- if (bits (this_instr, 28, 31) == INST_NV)
- /* Unconditional instructions. */
- switch (bits (this_instr, 24, 27))
- {
- case 0xa:
- case 0xb:
- /* Branch with Link and change to Thumb. */
- return 1;
- case 0xc:
- case 0xd:
- case 0xe:
- /* Coprocessor register transfer. */
- if (bits (this_instr, 12, 15) == 15)
- error (_("Invalid update to pc in instruction"));
- return 0;
- default:
- return 0;
- }
- else
- switch (bits (this_instr, 25, 27))
- {
- case 0x0:
- if (bits (this_instr, 23, 24) == 2 && bit (this_instr, 20) == 0)
- {
- /* Multiplies and extra load/stores. */
- if (bit (this_instr, 4) == 1 && bit (this_instr, 7) == 1)
- /* Neither multiplies nor extension load/stores are allowed
- to modify PC. */
- return 0;
-
- /* Otherwise, miscellaneous instructions. */
-
- /* BX <reg>, BXJ <reg>, BLX <reg> */
- if (bits (this_instr, 4, 27) == 0x12fff1
- || bits (this_instr, 4, 27) == 0x12fff2
- || bits (this_instr, 4, 27) == 0x12fff3)
- return 1;
-
- /* Other miscellaneous instructions are unpredictable if they
- modify PC. */
- return 0;
- }
- /* Data processing instruction. Fall through. */
-
- case 0x1:
- if (bits (this_instr, 12, 15) == 15)
- return 1;
- else
- return 0;
-
- case 0x2:
- case 0x3:
- /* Media instructions and architecturally undefined instructions. */
- if (bits (this_instr, 25, 27) == 3 && bit (this_instr, 4) == 1)
- return 0;
-
- /* Stores. */
- if (bit (this_instr, 20) == 0)
- return 0;
-
- /* Loads. */
- if (bits (this_instr, 12, 15) == ARM_PC_REGNUM)
- return 1;
- else
- return 0;
-
- case 0x4:
- /* Load/store multiple. */
- if (bit (this_instr, 20) == 1 && bit (this_instr, 15) == 1)
- return 1;
- else
- return 0;
-
- case 0x5:
- /* Branch and branch with link. */
- return 1;
-
- case 0x6:
- case 0x7:
- /* Coprocessor transfers or SWIs can not affect PC. */
- return 0;
-
- default:
- internal_error (__FILE__, __LINE__, _("bad value in switch"));
- }
-}
-
/* Return 1 if the ARM instruction INSN restores SP in epilogue, 0
otherwise. */
@@ -2827,37 +2613,26 @@ arm_exidx_unwind_sniffer (const struct frame_unwind *self,
/* We also assume exception information is valid if we're currently
blocked in a system call. The system library is supposed to
- ensure this, so that e.g. pthread cancellation works.
-
- But before verifying the instruction at the point of call, make
- sure this_frame is actually making a call (or, said differently,
- that it is not the innermost frame). For that, we compare
- this_frame's PC vs this_frame's addr_in_block. If equal, it means
- there is no call (otherwise, the PC would be the return address,
- which is the instruction after the call). */
-
- if (get_frame_pc (this_frame) != addr_in_block)
+ ensure this, so that e.g. pthread cancellation works. */
+ if (arm_frame_is_thumb (this_frame))
{
- if (arm_frame_is_thumb (this_frame))
- {
- LONGEST insn;
-
- if (safe_read_memory_integer (get_frame_pc (this_frame) - 2, 2,
- byte_order_for_code, &insn)
- && (insn & 0xff00) == 0xdf00 /* svc */)
- exc_valid = 1;
- }
- else
- {
- LONGEST insn;
+ LONGEST insn;
- if (safe_read_memory_integer (get_frame_pc (this_frame) - 4, 4,
- byte_order_for_code, &insn)
- && (insn & 0x0f000000) == 0x0f000000 /* svc */)
- exc_valid = 1;
- }
+ if (safe_read_memory_integer (get_frame_pc (this_frame) - 2, 2,
+ byte_order_for_code, &insn)
+ && (insn & 0xff00) == 0xdf00 /* svc */)
+ exc_valid = 1;
}
+ else
+ {
+ LONGEST insn;
+ if (safe_read_memory_integer (get_frame_pc (this_frame) - 4, 4,
+ byte_order_for_code, &insn)
+ && (insn & 0x0f000000) == 0x0f000000 /* svc */)
+ exc_valid = 1;
+ }
+
/* Bail out if we don't know that exception information is valid. */
if (!exc_valid)
return 0;
@@ -4314,1092 +4089,117 @@ convert_to_extended (const struct floatformat *fmt, void *dbl, const void *ptr,
&d, dbl);
}
-static unsigned long
-shifted_reg_val (struct regcache *regcache, unsigned long inst, int carry,
- unsigned long pc_val, unsigned long status_reg)
+/* Like insert_single_step_breakpoint, but make sure we use a breakpoint
+ of the appropriate mode (as encoded in the PC value), even if this
+ differs from what would be expected according to the symbol tables. */
+
+void
+arm_insert_single_step_breakpoint (struct gdbarch *gdbarch,
+ struct address_space *aspace,
+ CORE_ADDR pc)
{
- unsigned long res, shift;
- int rm = bits (inst, 0, 3);
- unsigned long shifttype = bits (inst, 5, 6);
+ struct cleanup *old_chain
+ = make_cleanup_restore_integer (&arm_override_mode);
- if (bit (inst, 4))
- {
- int rs = bits (inst, 8, 11);
- shift = (rs == 15 ? pc_val + 8
- : regcache_raw_get_unsigned (regcache, rs)) & 0xFF;
- }
- else
- shift = bits (inst, 7, 11);
+ arm_override_mode = IS_THUMB_ADDR (pc);
+ pc = gdbarch_addr_bits_remove (gdbarch, pc);
- res = (rm == ARM_PC_REGNUM
- ? (pc_val + (bit (inst, 4) ? 12 : 8))
- : regcache_raw_get_unsigned (regcache, rm));
+ insert_single_step_breakpoint (gdbarch, aspace, pc);
- switch (shifttype)
- {
- case 0: /* LSL */
- res = shift >= 32 ? 0 : res << shift;
- break;
+ do_cleanups (old_chain);
+}
- case 1: /* LSR */
- res = shift >= 32 ? 0 : res >> shift;
- break;
+/* Given BUF, which is OLD_LEN bytes ending at ENDADDR, expand
+ the buffer to be NEW_LEN bytes ending at ENDADDR. Return
+ NULL if an error occurs. BUF is freed. */
- case 2: /* ASR */
- if (shift >= 32)
- shift = 31;
- res = ((res & 0x80000000L)
- ? ~((~res) >> shift) : res >> shift);
- break;
+static gdb_byte *
+extend_buffer_earlier (gdb_byte *buf, CORE_ADDR endaddr,
+ int old_len, int new_len)
+{
+ gdb_byte *new_buf;
+ int bytes_to_read = new_len - old_len;
- case 3: /* ROR/RRX */
- shift &= 31;
- if (shift == 0)
- res = (res >> 1) | (carry ? 0x80000000L : 0);
- else
- res = (res >> shift) | (res << (32 - shift));
- break;
+ new_buf = (gdb_byte *) xmalloc (new_len);
+ memcpy (new_buf + bytes_to_read, buf, old_len);
+ xfree (buf);
+ if (target_read_memory (endaddr - new_len, new_buf, bytes_to_read) != 0)
+ {
+ xfree (new_buf);
+ return NULL;
}
-
- return res & 0xffffffff;
+ return new_buf;
}
-static int
-thumb_advance_itstate (unsigned int itstate)
-{
- /* Preserve IT[7:5], the first three bits of the condition. Shift
- the upcoming condition flags left by one bit. */
- itstate = (itstate & 0xe0) | ((itstate << 1) & 0x1f);
-
- /* If we have finished the IT block, clear the state. */
- if ((itstate & 0x0f) == 0)
- itstate = 0;
-
- return itstate;
-}
+/* An IT block is at most the 2-byte IT instruction followed by
+ four 4-byte instructions. The furthest back we must search to
+ find an IT block that affects the current instruction is thus
+ 2 + 3 * 4 == 14 bytes. */
+#define MAX_IT_BLOCK_PREFIX 14
-/* Find the next PC after the current instruction executes. In some
- cases we can not statically determine the answer (see the IT state
- handling in this function); in that case, a breakpoint may be
- inserted in addition to the returned PC, which will be used to set
- another breakpoint by our caller. */
+/* Use a quick scan if there are more than this many bytes of
+ code. */
+#define IT_SCAN_THRESHOLD 32
+/* Adjust a breakpoint's address to move breakpoints out of IT blocks.
+ A breakpoint in an IT block may not be hit, depending on the
+ condition flags. */
static CORE_ADDR
-thumb_get_next_pc_raw (struct regcache *regcache, CORE_ADDR pc)
+arm_adjust_breakpoint_address (struct gdbarch *gdbarch, CORE_ADDR bpaddr)
{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct address_space *aspace = get_regcache_aspace (regcache);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */
- unsigned short inst1;
- CORE_ADDR nextpc = pc + 2; /* Default is next instruction. */
- unsigned long offset;
- ULONGEST status, itstate;
-
- nextpc = MAKE_THUMB_ADDR (nextpc);
- pc_val = MAKE_THUMB_ADDR (pc_val);
-
- inst1 = read_memory_unsigned_integer (pc, 2, byte_order_for_code);
-
- /* Thumb-2 conditional execution support. There are eight bits in
- the CPSR which describe conditional execution state. Once
- reconstructed (they're in a funny order), the low five bits
- describe the low bit of the condition for each instruction and
- how many instructions remain. The high three bits describe the
- base condition. One of the low four bits will be set if an IT
- block is active. These bits read as zero on earlier
- processors. */
- status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
- itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
-
- /* If-Then handling. On GNU/Linux, where this routine is used, we
- use an undefined instruction as a breakpoint. Unlike BKPT, IT
- can disable execution of the undefined instruction. So we might
- miss the breakpoint if we set it on a skipped conditional
- instruction. Because conditional instructions can change the
- flags, affecting the execution of further instructions, we may
- need to set two breakpoints. */
-
- if (gdbarch_tdep (gdbarch)->thumb2_breakpoint != NULL)
- {
- if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
- {
- /* An IT instruction. Because this instruction does not
- modify the flags, we can accurately predict the next
- executed instruction. */
- itstate = inst1 & 0x00ff;
- pc += thumb_insn_size (inst1);
-
- while (itstate != 0 && ! condition_true (itstate >> 4, status))
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
-
- return MAKE_THUMB_ADDR (pc);
- }
- else if (itstate != 0)
- {
- /* We are in a conditional block. Check the condition. */
- if (! condition_true (itstate >> 4, status))
- {
- /* Advance to the next executed instruction. */
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
+ gdb_byte *buf;
+ char map_type;
+ CORE_ADDR boundary, func_start;
+ int buf_len;
+ enum bfd_endian order = gdbarch_byte_order_for_code (gdbarch);
+ int i, any, last_it, last_it_count;
- while (itstate != 0 && ! condition_true (itstate >> 4, status))
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
+ /* If we are using BKPT breakpoints, none of this is necessary. */
+ if (gdbarch_tdep (gdbarch)->thumb2_breakpoint == NULL)
+ return bpaddr;
- return MAKE_THUMB_ADDR (pc);
- }
- else if ((itstate & 0x0f) == 0x08)
- {
- /* This is the last instruction of the conditional
- block, and it is executed. We can handle it normally
- because the following instruction is not conditional,
- and we must handle it normally because it is
- permitted to branch. Fall through. */
- }
- else
- {
- int cond_negated;
-
- /* There are conditional instructions after this one.
- If this instruction modifies the flags, then we can
- not predict what the next executed instruction will
- be. Fortunately, this instruction is architecturally
- forbidden to branch; we know it will fall through.
- Start by skipping past it. */
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
-
- /* Set a breakpoint on the following instruction. */
- gdb_assert ((itstate & 0x0f) != 0);
- arm_insert_single_step_breakpoint (gdbarch, aspace,
- MAKE_THUMB_ADDR (pc));
- cond_negated = (itstate >> 4) & 1;
-
- /* Skip all following instructions with the same
- condition. If there is a later instruction in the IT
- block with the opposite condition, set the other
- breakpoint there. If not, then set a breakpoint on
- the instruction after the IT block. */
- do
- {
- inst1 = read_memory_unsigned_integer (pc, 2,
- byte_order_for_code);
- pc += thumb_insn_size (inst1);
- itstate = thumb_advance_itstate (itstate);
- }
- while (itstate != 0 && ((itstate >> 4) & 1) == cond_negated);
+ /* ARM mode does not have this problem. */
+ if (!arm_pc_is_thumb (gdbarch, bpaddr))
+ return bpaddr;
- return MAKE_THUMB_ADDR (pc);
- }
- }
- }
- else if (itstate & 0x0f)
- {
- /* We are in a conditional block. Check the condition. */
- int cond = itstate >> 4;
+ /* We are setting a breakpoint in Thumb code that could potentially
+ contain an IT block. The first step is to find how much Thumb
+ code there is; we do not need to read outside of known Thumb
+ sequences. */
+ map_type = arm_find_mapping_symbol (bpaddr, &boundary);
+ if (map_type == 0)
+ /* Thumb-2 code must have mapping symbols to have a chance. */
+ return bpaddr;
- if (! condition_true (cond, status))
- /* Advance to the next instruction. All the 32-bit
- instructions share a common prefix. */
- return MAKE_THUMB_ADDR (pc + thumb_insn_size (inst1));
+ bpaddr = gdbarch_addr_bits_remove (gdbarch, bpaddr);
- /* Otherwise, handle the instruction normally. */
- }
+ if (find_pc_partial_function (bpaddr, NULL, &func_start, NULL)
+ && func_start > boundary)
+ boundary = func_start;
- if ((inst1 & 0xff00) == 0xbd00) /* pop {rlist, pc} */
- {
- CORE_ADDR sp;
+ /* Search for a candidate IT instruction. We have to do some fancy
+ footwork to distinguish a real IT instruction from the second
+ half of a 32-bit instruction, but there is no need for that if
+ there's no candidate. */
+ buf_len = min (bpaddr - boundary, MAX_IT_BLOCK_PREFIX);
+ if (buf_len == 0)
+ /* No room for an IT instruction. */
+ return bpaddr;
- /* Fetch the saved PC from the stack. It's stored above
- all of the other registers. */
- offset = bitcount (bits (inst1, 0, 7)) * INT_REGISTER_SIZE;
- sp = regcache_raw_get_unsigned (regcache, ARM_SP_REGNUM);
- nextpc = read_memory_unsigned_integer (sp + offset, 4, byte_order);
- }
- else if ((inst1 & 0xf000) == 0xd000) /* conditional branch */
+ buf = (gdb_byte *) xmalloc (buf_len);
+ if (target_read_memory (bpaddr - buf_len, buf, buf_len) != 0)
+ return bpaddr;
+ any = 0;
+ for (i = 0; i < buf_len; i += 2)
{
- unsigned long cond = bits (inst1, 8, 11);
- if (cond == 0x0f) /* 0x0f = SWI */
+ unsigned short inst1 = extract_unsigned_integer (&buf[i], 2, order);
+ if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
{
- struct gdbarch_tdep *tdep;
- tdep = gdbarch_tdep (gdbarch);
-
- if (tdep->syscall_next_pc != NULL)
- nextpc = tdep->syscall_next_pc (regcache);
-
+ any = 1;
+ break;
}
- else if (cond != 0x0f && condition_true (cond, status))
- nextpc = pc_val + (sbits (inst1, 0, 7) << 1);
}
- else if ((inst1 & 0xf800) == 0xe000) /* unconditional branch */
- {
- nextpc = pc_val + (sbits (inst1, 0, 10) << 1);
- }
- else if (thumb_insn_size (inst1) == 4) /* 32-bit instruction */
- {
- unsigned short inst2;
- inst2 = read_memory_unsigned_integer (pc + 2, 2, byte_order_for_code);
-
- /* Default to the next instruction. */
- nextpc = pc + 4;
- nextpc = MAKE_THUMB_ADDR (nextpc);
-
- if ((inst1 & 0xf800) == 0xf000 && (inst2 & 0x8000) == 0x8000)
- {
- /* Branches and miscellaneous control instructions. */
-
- if ((inst2 & 0x1000) != 0 || (inst2 & 0xd001) == 0xc000)
- {
- /* B, BL, BLX. */
- int j1, j2, imm1, imm2;
-
- imm1 = sbits (inst1, 0, 10);
- imm2 = bits (inst2, 0, 10);
- j1 = bit (inst2, 13);
- j2 = bit (inst2, 11);
-
- offset = ((imm1 << 12) + (imm2 << 1));
- offset ^= ((!j2) << 22) | ((!j1) << 23);
-
- nextpc = pc_val + offset;
- /* For BLX make sure to clear the low bits. */
- if (bit (inst2, 12) == 0)
- nextpc = nextpc & 0xfffffffc;
- }
- else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
- {
- /* SUBS PC, LR, #imm8. */
- nextpc = regcache_raw_get_unsigned (regcache, ARM_LR_REGNUM);
- nextpc -= inst2 & 0x00ff;
- }
- else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
- {
- /* Conditional branch. */
- if (condition_true (bits (inst1, 6, 9), status))
- {
- int sign, j1, j2, imm1, imm2;
-
- sign = sbits (inst1, 10, 10);
- imm1 = bits (inst1, 0, 5);
- imm2 = bits (inst2, 0, 10);
- j1 = bit (inst2, 13);
- j2 = bit (inst2, 11);
-
- offset = (sign << 20) + (j2 << 19) + (j1 << 18);
- offset += (imm1 << 12) + (imm2 << 1);
-
- nextpc = pc_val + offset;
- }
- }
- }
- else if ((inst1 & 0xfe50) == 0xe810)
- {
- /* Load multiple or RFE. */
- int rn, offset, load_pc = 1;
-
- rn = bits (inst1, 0, 3);
- if (bit (inst1, 7) && !bit (inst1, 8))
- {
- /* LDMIA or POP */
- if (!bit (inst2, 15))
- load_pc = 0;
- offset = bitcount (inst2) * 4 - 4;
- }
- else if (!bit (inst1, 7) && bit (inst1, 8))
- {
- /* LDMDB */
- if (!bit (inst2, 15))
- load_pc = 0;
- offset = -4;
- }
- else if (bit (inst1, 7) && bit (inst1, 8))
- {
- /* RFEIA */
- offset = 0;
- }
- else if (!bit (inst1, 7) && !bit (inst1, 8))
- {
- /* RFEDB */
- offset = -8;
- }
- else
- load_pc = 0;
-
- if (load_pc)
- {
- CORE_ADDR addr = regcache_raw_get_unsigned (regcache, rn);
- nextpc = read_memory_unsigned_integer (addr + offset, 4,
- byte_order);
- }
- }
- else if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
- {
- /* MOV PC or MOVS PC. */
- nextpc = regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
- nextpc = MAKE_THUMB_ADDR (nextpc);
- }
- else if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
- {
- /* LDR PC. */
- CORE_ADDR base;
- int rn, load_pc = 1;
-
- rn = bits (inst1, 0, 3);
- base = regcache_raw_get_unsigned (regcache, rn);
- if (rn == ARM_PC_REGNUM)
- {
- base = (base + 4) & ~(CORE_ADDR) 0x3;
- if (bit (inst1, 7))
- base += bits (inst2, 0, 11);
- else
- base -= bits (inst2, 0, 11);
- }
- else if (bit (inst1, 7))
- base += bits (inst2, 0, 11);
- else if (bit (inst2, 11))
- {
- if (bit (inst2, 10))
- {
- if (bit (inst2, 9))
- base += bits (inst2, 0, 7);
- else
- base -= bits (inst2, 0, 7);
- }
- }
- else if ((inst2 & 0x0fc0) == 0x0000)
- {
- int shift = bits (inst2, 4, 5), rm = bits (inst2, 0, 3);
- base += regcache_raw_get_unsigned (regcache, rm) << shift;
- }
- else
- /* Reserved. */
- load_pc = 0;
-
- if (load_pc)
- nextpc = read_memory_unsigned_integer (base, 4, byte_order);
- }
- else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
- {
- /* TBB. */
- CORE_ADDR tbl_reg, table, offset, length;
-
- tbl_reg = bits (inst1, 0, 3);
- if (tbl_reg == 0x0f)
- table = pc + 4; /* Regcache copy of PC isn't right yet. */
- else
- table = regcache_raw_get_unsigned (regcache, tbl_reg);
-
- offset = regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
- length = 2 * read_memory_unsigned_integer (table + offset, 1,
- byte_order);
- nextpc = pc_val + length;
- }
- else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
- {
- /* TBH. */
- CORE_ADDR tbl_reg, table, offset, length;
-
- tbl_reg = bits (inst1, 0, 3);
- if (tbl_reg == 0x0f)
- table = pc + 4; /* Regcache copy of PC isn't right yet. */
- else
- table = regcache_raw_get_unsigned (regcache, tbl_reg);
-
- offset = 2 * regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
- length = 2 * read_memory_unsigned_integer (table + offset, 2,
- byte_order);
- nextpc = pc_val + length;
- }
- }
- else if ((inst1 & 0xff00) == 0x4700) /* bx REG, blx REG */
- {
- if (bits (inst1, 3, 6) == 0x0f)
- nextpc = UNMAKE_THUMB_ADDR (pc_val);
- else
- nextpc = regcache_raw_get_unsigned (regcache, bits (inst1, 3, 6));
- }
- else if ((inst1 & 0xff87) == 0x4687) /* mov pc, REG */
- {
- if (bits (inst1, 3, 6) == 0x0f)
- nextpc = pc_val;
- else
- nextpc = regcache_raw_get_unsigned (regcache, bits (inst1, 3, 6));
-
- nextpc = MAKE_THUMB_ADDR (nextpc);
- }
- else if ((inst1 & 0xf500) == 0xb100)
- {
- /* CBNZ or CBZ. */
- int imm = (bit (inst1, 9) << 6) + (bits (inst1, 3, 7) << 1);
- ULONGEST reg = regcache_raw_get_unsigned (regcache, bits (inst1, 0, 2));
-
- if (bit (inst1, 11) && reg != 0)
- nextpc = pc_val + imm;
- else if (!bit (inst1, 11) && reg == 0)
- nextpc = pc_val + imm;
- }
- return nextpc;
-}
-
-/* Get the raw next address. PC is the current program counter, in
- FRAME, which is assumed to be executing in ARM mode.
-
- The value returned has the execution state of the next instruction
- encoded in it. Use IS_THUMB_ADDR () to see whether the instruction is
- in Thumb-State, and gdbarch_addr_bits_remove () to get the plain memory
- address. */
-
-static CORE_ADDR
-arm_get_next_pc_raw (struct regcache *regcache, CORE_ADDR pc)
-{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- unsigned long pc_val;
- unsigned long this_instr;
- unsigned long status;
- CORE_ADDR nextpc;
-
- pc_val = (unsigned long) pc;
- this_instr = read_memory_unsigned_integer (pc, 4, byte_order_for_code);
-
- status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
- nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */
-
- if (bits (this_instr, 28, 31) == INST_NV)
- switch (bits (this_instr, 24, 27))
- {
- case 0xa:
- case 0xb:
- {
- /* Branch with Link and change to Thumb. */
- nextpc = BranchDest (pc, this_instr);
- nextpc |= bit (this_instr, 24) << 1;
- nextpc = MAKE_THUMB_ADDR (nextpc);
- break;
- }
- case 0xc:
- case 0xd:
- case 0xe:
- /* Coprocessor register transfer. */
- if (bits (this_instr, 12, 15) == 15)
- error (_("Invalid update to pc in instruction"));
- break;
- }
- else if (condition_true (bits (this_instr, 28, 31), status))
- {
- switch (bits (this_instr, 24, 27))
- {
- case 0x0:
- case 0x1: /* data processing */
- case 0x2:
- case 0x3:
- {
- unsigned long operand1, operand2, result = 0;
- unsigned long rn;
- int c;
-
- if (bits (this_instr, 12, 15) != 15)
- break;
-
- if (bits (this_instr, 22, 25) == 0
- && bits (this_instr, 4, 7) == 9) /* multiply */
- error (_("Invalid update to pc in instruction"));
-
- /* BX <reg>, BLX <reg> */
- if (bits (this_instr, 4, 27) == 0x12fff1
- || bits (this_instr, 4, 27) == 0x12fff3)
- {
- rn = bits (this_instr, 0, 3);
- nextpc = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : regcache_raw_get_unsigned (regcache, rn));
-
- return nextpc;
- }
-
- /* Multiply into PC. */
- c = (status & FLAG_C) ? 1 : 0;
- rn = bits (this_instr, 16, 19);
- operand1 = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : regcache_raw_get_unsigned (regcache, rn));
-
- if (bit (this_instr, 25))
- {
- unsigned long immval = bits (this_instr, 0, 7);
- unsigned long rotate = 2 * bits (this_instr, 8, 11);
- operand2 = ((immval >> rotate) | (immval << (32 - rotate)))
- & 0xffffffff;
- }
- else /* operand 2 is a shifted register. */
- operand2 = shifted_reg_val (regcache, this_instr, c,
- pc_val, status);
-
- switch (bits (this_instr, 21, 24))
- {
- case 0x0: /*and */
- result = operand1 & operand2;
- break;
-
- case 0x1: /*eor */
- result = operand1 ^ operand2;
- break;
-
- case 0x2: /*sub */
- result = operand1 - operand2;
- break;
-
- case 0x3: /*rsb */
- result = operand2 - operand1;
- break;
-
- case 0x4: /*add */
- result = operand1 + operand2;
- break;
-
- case 0x5: /*adc */
- result = operand1 + operand2 + c;
- break;
-
- case 0x6: /*sbc */
- result = operand1 - operand2 + c;
- break;
-
- case 0x7: /*rsc */
- result = operand2 - operand1 + c;
- break;
-
- case 0x8:
- case 0x9:
- case 0xa:
- case 0xb: /* tst, teq, cmp, cmn */
- result = (unsigned long) nextpc;
- break;
-
- case 0xc: /*orr */
- result = operand1 | operand2;
- break;
-
- case 0xd: /*mov */
- /* Always step into a function. */
- result = operand2;
- break;
-
- case 0xe: /*bic */
- result = operand1 & ~operand2;
- break;
-
- case 0xf: /*mvn */
- result = ~operand2;
- break;
- }
-
- /* In 26-bit APCS the bottom two bits of the result are
- ignored, and we always end up in ARM state. */
- if (!arm_apcs_32)
- nextpc = arm_addr_bits_remove (gdbarch, result);
- else
- nextpc = result;
-
- break;
- }
-
- case 0x4:
- case 0x5: /* data transfer */
- case 0x6:
- case 0x7:
- if (bits (this_instr, 25, 27) == 0x3 && bit (this_instr, 4) == 1)
- {
- /* Media instructions and architecturally undefined
- instructions. */
- break;
- }
-
- if (bit (this_instr, 20))
- {
- /* load */
- if (bits (this_instr, 12, 15) == 15)
- {
- /* rd == pc */
- unsigned long rn;
- unsigned long base;
-
- if (bit (this_instr, 22))
- error (_("Invalid update to pc in instruction"));
-
- /* byte write to PC */
- rn = bits (this_instr, 16, 19);
- base = ((rn == ARM_PC_REGNUM)
- ? (pc_val + 8)
- : regcache_raw_get_unsigned (regcache, rn));
-
- if (bit (this_instr, 24))
- {
- /* pre-indexed */
- int c = (status & FLAG_C) ? 1 : 0;
- unsigned long offset =
- (bit (this_instr, 25)
- ? shifted_reg_val (regcache, this_instr, c, pc_val,
- status)
- : bits (this_instr, 0, 11));
-
- if (bit (this_instr, 23))
- base += offset;
- else
- base -= offset;
- }
- nextpc =
- (CORE_ADDR) read_memory_unsigned_integer ((CORE_ADDR) base,
- 4, byte_order);
- }
- }
- break;
-
- case 0x8:
- case 0x9: /* block transfer */
- if (bit (this_instr, 20))
- {
- /* LDM */
- if (bit (this_instr, 15))
- {
- /* loading pc */
- int offset = 0;
- unsigned long rn_val
- = regcache_raw_get_unsigned (regcache,
- bits (this_instr, 16, 19));
-
- if (bit (this_instr, 23))
- {
- /* up */
- unsigned long reglist = bits (this_instr, 0, 14);
- offset = bitcount (reglist) * 4;
- if (bit (this_instr, 24)) /* pre */
- offset += 4;
- }
- else if (bit (this_instr, 24))
- offset = -4;
-
- nextpc =
- (CORE_ADDR) read_memory_unsigned_integer ((CORE_ADDR)
- (rn_val + offset),
- 4, byte_order);
- }
- }
- break;
-
- case 0xb: /* branch & link */
- case 0xa: /* branch */
- {
- nextpc = BranchDest (pc, this_instr);
- break;
- }
-
- case 0xc:
- case 0xd:
- case 0xe: /* coproc ops */
- break;
- case 0xf: /* SWI */
- {
- struct gdbarch_tdep *tdep;
- tdep = gdbarch_tdep (gdbarch);
-
- if (tdep->syscall_next_pc != NULL)
- nextpc = tdep->syscall_next_pc (regcache);
-
- }
- break;
-
- default:
- fprintf_filtered (gdb_stderr, _("Bad bit-field extraction\n"));
- return (pc);
- }
- }
-
- return nextpc;
-}
-
-/* Determine next PC after current instruction executes. Will call either
- arm_get_next_pc_raw or thumb_get_next_pc_raw. Error out if infinite
- loop is detected. */
-
-CORE_ADDR
-arm_get_next_pc (struct regcache *regcache, CORE_ADDR pc)
-{
- CORE_ADDR nextpc;
-
- if (arm_is_thumb (regcache))
- nextpc = thumb_get_next_pc_raw (regcache, pc);
- else
- nextpc = arm_get_next_pc_raw (regcache, pc);
-
- return nextpc;
-}
-
-/* Like insert_single_step_breakpoint, but make sure we use a breakpoint
- of the appropriate mode (as encoded in the PC value), even if this
- differs from what would be expected according to the symbol tables. */
-
-void
-arm_insert_single_step_breakpoint (struct gdbarch *gdbarch,
- struct address_space *aspace,
- CORE_ADDR pc)
-{
- struct cleanup *old_chain
- = make_cleanup_restore_integer (&arm_override_mode);
-
- arm_override_mode = IS_THUMB_ADDR (pc);
- pc = gdbarch_addr_bits_remove (gdbarch, pc);
-
- insert_single_step_breakpoint (gdbarch, aspace, pc);
-
- do_cleanups (old_chain);
-}
-
-/* Checks for an atomic sequence of instructions beginning with a LDREX{,B,H,D}
- instruction and ending with a STREX{,B,H,D} instruction. If such a sequence
- is found, attempt to step through it. A breakpoint is placed at the end of
- the sequence. */
-
-static int
-thumb_deal_with_atomic_sequence_raw (struct regcache *regcache)
-{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct address_space *aspace = get_regcache_aspace (regcache);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- CORE_ADDR pc = regcache_read_pc (regcache);
- CORE_ADDR breaks[2] = {-1, -1};
- CORE_ADDR loc = pc;
- unsigned short insn1, insn2;
- int insn_count;
- int index;
- int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
- const int atomic_sequence_length = 16; /* Instruction sequence length. */
- ULONGEST status, itstate;
-
- /* We currently do not support atomic sequences within an IT block. */
- status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
- itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
- if (itstate & 0x0f)
- return 0;
-
- /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction. */
- insn1 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
- if (thumb_insn_size (insn1) != 4)
- return 0;
-
- insn2 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
- if (!((insn1 & 0xfff0) == 0xe850
- || ((insn1 & 0xfff0) == 0xe8d0 && (insn2 & 0x00c0) == 0x0040)))
- return 0;
-
- /* Assume that no atomic sequence is longer than "atomic_sequence_length"
- instructions. */
- for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
- {
- insn1 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
-
- if (thumb_insn_size (insn1) != 4)
- {
- /* Assume that there is at most one conditional branch in the
- atomic sequence. If a conditional branch is found, put a
- breakpoint in its destination address. */
- if ((insn1 & 0xf000) == 0xd000 && bits (insn1, 8, 11) != 0x0f)
- {
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found,
- fallback to the standard code. */
-
- breaks[1] = loc + 2 + (sbits (insn1, 0, 7) << 1);
- last_breakpoint++;
- }
-
- /* We do not support atomic sequences that use any *other*
- instructions but conditional branches to change the PC.
- Fall back to standard code to avoid losing control of
- execution. */
- else if (thumb_instruction_changes_pc (insn1))
- return 0;
- }
- else
- {
- insn2 = read_memory_unsigned_integer (loc, 2, byte_order_for_code);
- loc += 2;
-
- /* Assume that there is at most one conditional branch in the
- atomic sequence. If a conditional branch is found, put a
- breakpoint in its destination address. */
- if ((insn1 & 0xf800) == 0xf000
- && (insn2 & 0xd000) == 0x8000
- && (insn1 & 0x0380) != 0x0380)
- {
- int sign, j1, j2, imm1, imm2;
- unsigned int offset;
-
- sign = sbits (insn1, 10, 10);
- imm1 = bits (insn1, 0, 5);
- imm2 = bits (insn2, 0, 10);
- j1 = bit (insn2, 13);
- j2 = bit (insn2, 11);
-
- offset = (sign << 20) + (j2 << 19) + (j1 << 18);
- offset += (imm1 << 12) + (imm2 << 1);
-
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found,
- fallback to the standard code. */
-
- breaks[1] = loc + offset;
- last_breakpoint++;
- }
-
- /* We do not support atomic sequences that use any *other*
- instructions but conditional branches to change the PC.
- Fall back to standard code to avoid losing control of
- execution. */
- else if (thumb2_instruction_changes_pc (insn1, insn2))
- return 0;
-
- /* If we find a strex{,b,h,d}, we're done. */
- if ((insn1 & 0xfff0) == 0xe840
- || ((insn1 & 0xfff0) == 0xe8c0 && (insn2 & 0x00c0) == 0x0040))
- break;
- }
- }
-
- /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
- if (insn_count == atomic_sequence_length)
- return 0;
-
- /* Insert a breakpoint right after the end of the atomic sequence. */
- breaks[0] = loc;
-
- /* Check for duplicated breakpoints. Check also for a breakpoint
- placed (branch instruction's destination) anywhere in sequence. */
- if (last_breakpoint
- && (breaks[1] == breaks[0]
- || (breaks[1] >= pc && breaks[1] < loc)))
- last_breakpoint = 0;
-
- /* Effectively inserts the breakpoints. */
- for (index = 0; index <= last_breakpoint; index++)
- arm_insert_single_step_breakpoint (gdbarch, aspace,
- MAKE_THUMB_ADDR (breaks[index]));
-
- return 1;
-}
-
-static int
-arm_deal_with_atomic_sequence_raw (struct regcache *regcache)
-{
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct address_space *aspace = get_regcache_aspace (regcache);
- enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- CORE_ADDR pc = regcache_read_pc (regcache);
- CORE_ADDR breaks[2] = {-1, -1};
- CORE_ADDR loc = pc;
- unsigned int insn;
- int insn_count;
- int index;
- int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
- const int atomic_sequence_length = 16; /* Instruction sequence length. */
-
- /* Assume all atomic sequences start with a ldrex{,b,h,d} instruction.
- Note that we do not currently support conditionally executed atomic
- instructions. */
- insn = read_memory_unsigned_integer (loc, 4, byte_order_for_code);
- loc += 4;
- if ((insn & 0xff9000f0) != 0xe1900090)
- return 0;
-
- /* Assume that no atomic sequence is longer than "atomic_sequence_length"
- instructions. */
- for (insn_count = 0; insn_count < atomic_sequence_length; ++insn_count)
- {
- insn = read_memory_unsigned_integer (loc, 4, byte_order_for_code);
- loc += 4;
-
- /* Assume that there is at most one conditional branch in the atomic
- sequence. If a conditional branch is found, put a breakpoint in
- its destination address. */
- if (bits (insn, 24, 27) == 0xa)
- {
- if (last_breakpoint > 0)
- return 0; /* More than one conditional branch found, fallback
- to the standard single-step code. */
-
- breaks[1] = BranchDest (loc - 4, insn);
- last_breakpoint++;
- }
-
- /* We do not support atomic sequences that use any *other* instructions
- but conditional branches to change the PC. Fall back to standard
- code to avoid losing control of execution. */
- else if (arm_instruction_changes_pc (insn))
- return 0;
-
- /* If we find a strex{,b,h,d}, we're done. */
- if ((insn & 0xff9000f0) == 0xe1800090)
- break;
- }
-
- /* If we didn't find the strex{,b,h,d}, we cannot handle the sequence. */
- if (insn_count == atomic_sequence_length)
- return 0;
-
- /* Insert a breakpoint right after the end of the atomic sequence. */
- breaks[0] = loc;
-
- /* Check for duplicated breakpoints. Check also for a breakpoint
- placed (branch instruction's destination) anywhere in sequence. */
- if (last_breakpoint
- && (breaks[1] == breaks[0]
- || (breaks[1] >= pc && breaks[1] < loc)))
- last_breakpoint = 0;
-
- /* Effectively inserts the breakpoints. */
- for (index = 0; index <= last_breakpoint; index++)
- arm_insert_single_step_breakpoint (gdbarch, aspace, breaks[index]);
-
- return 1;
-}
-
-int
-arm_deal_with_atomic_sequence (struct regcache *regcache)
-{
- if (arm_is_thumb (regcache))
- return thumb_deal_with_atomic_sequence_raw (regcache);
- else
- return arm_deal_with_atomic_sequence_raw (regcache);
-}
-
-/* single_step() is called just before we want to resume the inferior,
- if we want to single-step it but there is no hardware or kernel
- single-step support. We find the target of the coming instruction
- and breakpoint it. */
-
-int
-arm_software_single_step (struct frame_info *frame)
-{
- struct regcache *regcache = get_current_regcache ();
- struct gdbarch *gdbarch = get_regcache_arch (regcache);
- struct address_space *aspace = get_regcache_aspace (regcache);
- CORE_ADDR next_pc;
-
- if (arm_deal_with_atomic_sequence (regcache))
- return 1;
-
- next_pc = arm_get_next_pc (regcache, regcache_read_pc (regcache));
- arm_insert_single_step_breakpoint (gdbarch, aspace, next_pc);
-
- return 1;
-}
-
-/* Given BUF, which is OLD_LEN bytes ending at ENDADDR, expand
- the buffer to be NEW_LEN bytes ending at ENDADDR. Return
- NULL if an error occurs. BUF is freed. */
-
-static gdb_byte *
-extend_buffer_earlier (gdb_byte *buf, CORE_ADDR endaddr,
- int old_len, int new_len)
-{
- gdb_byte *new_buf;
- int bytes_to_read = new_len - old_len;
-
- new_buf = (gdb_byte *) xmalloc (new_len);
- memcpy (new_buf + bytes_to_read, buf, old_len);
- xfree (buf);
- if (target_read_memory (endaddr - new_len, new_buf, bytes_to_read) != 0)
- {
- xfree (new_buf);
- return NULL;
- }
- return new_buf;
-}
-/* An IT block is at most the 2-byte IT instruction followed by
- four 4-byte instructions. The furthest back we must search to
- find an IT block that affects the current instruction is thus
- 2 + 3 * 4 == 14 bytes. */
-#define MAX_IT_BLOCK_PREFIX 14
-
-/* Use a quick scan if there are more than this many bytes of
- code. */
-#define IT_SCAN_THRESHOLD 32
-
-/* Adjust a breakpoint's address to move breakpoints out of IT blocks.
- A breakpoint in an IT block may not be hit, depending on the
- condition flags. */
-static CORE_ADDR
-arm_adjust_breakpoint_address (struct gdbarch *gdbarch, CORE_ADDR bpaddr)
-{
- gdb_byte *buf;
- char map_type;
- CORE_ADDR boundary, func_start;
- int buf_len;
- enum bfd_endian order = gdbarch_byte_order_for_code (gdbarch);
- int i, any, last_it, last_it_count;
-
- /* If we are using BKPT breakpoints, none of this is necessary. */
- if (gdbarch_tdep (gdbarch)->thumb2_breakpoint == NULL)
- return bpaddr;
-
- /* ARM mode does not have this problem. */
- if (!arm_pc_is_thumb (gdbarch, bpaddr))
- return bpaddr;
-
- /* We are setting a breakpoint in Thumb code that could potentially
- contain an IT block. The first step is to find how much Thumb
- code there is; we do not need to read outside of known Thumb
- sequences. */
- map_type = arm_find_mapping_symbol (bpaddr, &boundary);
- if (map_type == 0)
- /* Thumb-2 code must have mapping symbols to have a chance. */
- return bpaddr;
-
- bpaddr = gdbarch_addr_bits_remove (gdbarch, bpaddr);
-
- if (find_pc_partial_function (bpaddr, NULL, &func_start, NULL)
- && func_start > boundary)
- boundary = func_start;
-
- /* Search for a candidate IT instruction. We have to do some fancy
- footwork to distinguish a real IT instruction from the second
- half of a 32-bit instruction, but there is no need for that if
- there's no candidate. */
- buf_len = min (bpaddr - boundary, MAX_IT_BLOCK_PREFIX);
- if (buf_len == 0)
- /* No room for an IT instruction. */
- return bpaddr;
-
- buf = (gdb_byte *) xmalloc (buf_len);
- if (target_read_memory (bpaddr - buf_len, buf, buf_len) != 0)
- return bpaddr;
- any = 0;
- for (i = 0; i < buf_len; i += 2)
- {
- unsigned short inst1 = extract_unsigned_integer (&buf[i], 2, order);
- if ((inst1 & 0xff00) == 0xbf00 && (inst1 & 0x000f) != 0)
- {
- any = 1;
- break;
- }
- }
if (any == 0)
{
xfree (buf);
@@ -7320,6 +6120,81 @@ thumb2_copy_block_xfer (struct gdbarch *gdbarch, uint16_t insn1, uint16_t insn2,
return 0;
}
+/* Wrapper over read_memory_unsigned_integer for use in arm_get_next_pcs.
+ This is used to avoid a dependency on BFD's bfd_endian enum. */
+
+ULONGEST
+arm_get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr, int len,
+ int byte_order)
+{
+ return read_memory_unsigned_integer (memaddr, len, byte_order);
+}
+
+/* Wrapper over gdbarch_addr_bits_remove for use in arm_get_next_pcs. */
+
+CORE_ADDR
+arm_get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self,
+ CORE_ADDR val)
+{
+ return gdbarch_addr_bits_remove (get_regcache_arch (self->regcache), val);
+}
+
+/* Wrapper over syscall_next_pc for use in get_next_pcs. */
+
+CORE_ADDR
+arm_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self, CORE_ADDR pc)
+{
+ struct gdbarch_tdep *tdep;
+
+ tdep = gdbarch_tdep (get_regcache_arch (self->regcache));
+ if (tdep->syscall_next_pc != NULL)
+ return tdep->syscall_next_pc (self->regcache);
+
+ return 0;
+}
+
+/* Wrapper over arm_is_thumb for use in arm_get_next_pcs. */
+
+int
+arm_get_next_pcs_is_thumb (struct arm_get_next_pcs *self)
+{
+ return arm_is_thumb (self->regcache);
+}
+
+/* single_step() is called just before we want to resume the inferior,
+ if we want to single-step it but there is no hardware or kernel
+ single-step support. We find the target of the coming instructions
+ and breakpoint them. */
+
+int
+arm_software_single_step (struct frame_info *frame)
+{
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct address_space *aspace = get_regcache_aspace (regcache);
+ struct arm_get_next_pcs next_pcs_ctx;
+ CORE_ADDR pc;
+ int i;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+ struct cleanup *old_chain = make_cleanup (VEC_cleanup (CORE_ADDR), &next_pcs);
+
+ arm_get_next_pcs_ctor (&next_pcs_ctx,
+ &arm_get_next_pcs_ops,
+ gdbarch_byte_order (gdbarch),
+ gdbarch_byte_order_for_code (gdbarch),
+ gdbarch_tdep (gdbarch)->thumb2_breakpoint,
+ regcache);
+
+ next_pcs = arm_get_next_pcs (&next_pcs_ctx, regcache_read_pc (regcache));
+
+ for (i = 0; VEC_iterate (CORE_ADDR, next_pcs, i, pc); i++)
+ arm_insert_single_step_breakpoint (gdbarch, aspace, pc);
+
+ do_cleanups (old_chain);
+
+ return 1;
+}
+
/* Cleanup/copy SVC (SWI) instructions. These two functions are overridden
for Linux, where some SVC instructions must be treated specially. */
diff --git a/gdb/arm-tdep.h b/gdb/arm-tdep.h
index 0063fef..6bee06c 100644
--- a/gdb/arm-tdep.h
+++ b/gdb/arm-tdep.h
@@ -23,6 +23,9 @@
struct gdbarch;
struct regset;
struct address_space;
+struct get_next_pcs;
+struct arm_get_next_pcs;
+struct gdb_get_next_pcs;
#include "arch/arm.h"
@@ -250,10 +253,21 @@ extern void
ULONGEST val, enum pc_write_style write_pc);
CORE_ADDR arm_skip_stub (struct frame_info *, CORE_ADDR);
-CORE_ADDR arm_get_next_pc (struct regcache *regcache, CORE_ADDR pc);
+
+ULONGEST arm_get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr,
+ int len,
+ int byte_order);
+
+CORE_ADDR arm_get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self,
+ CORE_ADDR val);
+
+CORE_ADDR arm_get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self,
+ CORE_ADDR pc);
+
+int arm_get_next_pcs_is_thumb (struct arm_get_next_pcs *self);
+
void arm_insert_single_step_breakpoint (struct gdbarch *,
struct address_space *, CORE_ADDR);
-int arm_deal_with_atomic_sequence (struct regcache *);
int arm_software_single_step (struct frame_info *);
int arm_is_thumb (struct regcache *regcache);
int arm_frame_is_thumb (struct frame_info *frame);
diff --git a/gdb/common/gdb_vecs.h b/gdb/common/gdb_vecs.h
index b3f56f8..a08d416 100644
--- a/gdb/common/gdb_vecs.h
+++ b/gdb/common/gdb_vecs.h
@@ -31,6 +31,8 @@ DEF_VEC_P (const_char_ptr);
DEF_VEC_I (int);
+DEF_VEC_I (CORE_ADDR);
+
extern void free_char_ptr_vec (VEC (char_ptr) *char_ptr_vec);
extern struct cleanup *
diff --git a/gdb/configure.tgt b/gdb/configure.tgt
index dfbb4d1..6e50dd2 100644
--- a/gdb/configure.tgt
+++ b/gdb/configure.tgt
@@ -44,7 +44,8 @@ aarch64*-*-elf)
aarch64*-*-linux*)
# Target: AArch64 linux
gdb_target_obs="aarch64-tdep.o aarch64-linux-tdep.o aarch64-insn.o \
- arm.o arm-tdep.o arm-linux-tdep.o \
+ arm.o arm-linux.o arm-get-next-pcs.o arm-tdep.o \
+ arm-linux-tdep.o \
glibc-tdep.o linux-tdep.o solib-svr4.o \
symfile-mem.o linux-record.o"
build_gdbserver=yes
@@ -84,31 +85,34 @@ am33_2.0*-*-linux*)
arm*-wince-pe | arm*-*-mingw32ce*)
# Target: ARM based machine running Windows CE (win32)
- gdb_target_obs="arm.o arm-tdep.o arm-wince-tdep.o windows-tdep.o"
+ gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o \
+ arm-wince-tdep.o windows-tdep.o"
build_gdbserver=yes
;;
arm*-*-linux*)
# Target: ARM based machine running GNU/Linux
- gdb_target_obs="arm.o arm-tdep.o arm-linux-tdep.o glibc-tdep.o \
+ gdb_target_obs="arm.o arm-linux.o arm-get-next-pcs.o arm-tdep.o \
+ arm-linux-tdep.o glibc-tdep.o \
solib-svr4.o symfile-mem.o linux-tdep.o linux-record.o"
build_gdbserver=yes
;;
arm*-*-netbsd* | arm*-*-knetbsd*-gnu)
# Target: NetBSD/arm
- gdb_target_obs="arm.o arm-tdep.o armnbsd-tdep.o solib-svr4.o"
+ gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o armnbsd-tdep.o \
+ solib-svr4.o"
;;
arm*-*-openbsd*)
# Target: OpenBSD/arm
- gdb_target_obs="arm.o arm-tdep.o armbsd-tdep.o armobsd-tdep.o \
- obsd-tdep.o solib-svr4.o"
+ gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o armbsd-tdep.o \
+ armobsd-tdep.o obsd-tdep.o solib-svr4.o"
;;
arm*-*-symbianelf*)
# Target: SymbianOS/arm
- gdb_target_obs="arm.o arm-tdep.o arm-symbian-tdep.o"
+ gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o arm-symbian-tdep.o"
;;
arm*-*-*)
# Target: ARM embedded system
- gdb_target_obs="arm.o arm-tdep.o"
+ gdb_target_obs="arm.o arm-get-next-pcs.o arm-tdep.o"
gdb_sim=../sim/arm/libsim.a
;;
diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in
index 82af44c..c72db67 100644
--- a/gdb/gdbserver/Makefile.in
+++ b/gdb/gdbserver/Makefile.in
@@ -181,7 +181,8 @@ SFILES= $(srcdir)/gdbreplay.c $(srcdir)/inferiors.c $(srcdir)/dll.c \
$(srcdir)/common/common-exceptions.c $(srcdir)/symbol.c \
$(srcdir)/common/btrace-common.c \
$(srcdir)/common/fileio.c $(srcdir)/nat/linux-namespaces.c \
- $(srcdir)/arch/arm.c $(srcdir)/common/common-regcache.c
+ $(srcdir)/arch/arm.c $(srcdir)/common/common-regcache.c \
+ $(srcdir)/arch/arm-linux.c $(srcdir)/arch/arm-get-next-pcs.c
DEPFILES = @GDBSERVER_DEPFILES@
@@ -592,6 +593,12 @@ common-regcache.o: ../common/common-regcache.c
arm.o: ../arch/arm.c
$(COMPILE) $<
$(POSTCOMPILE)
+arm-linux.o: ../arch/arm-linux.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
+arm-get-next-pcs.o: ../arch/arm-get-next-pcs.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
# Native object files rules from ../nat
diff --git a/gdb/gdbserver/configure.srv b/gdb/gdbserver/configure.srv
index 6dfd6e0..5f5112e 100644
--- a/gdb/gdbserver/configure.srv
+++ b/gdb/gdbserver/configure.srv
@@ -72,6 +72,8 @@ case "${target}" in
srv_tgtobj="$srv_linux_obj linux-arm-low.o"
srv_tgtobj="$srv_tgtobj linux-aarch32-low.o"
srv_tgtobj="${srv_tgtobj} arm.o"
+ srv_tgtobj="${srv_tgtobj} arm-linux.o"
+ srv_tgtobj="${srv_tgtobj} arm-get-next-pcs.o"
srv_xmlfiles="arm-with-iwmmxt.xml"
srv_xmlfiles="${srv_xmlfiles} arm-with-vfpv2.xml"
srv_xmlfiles="${srv_xmlfiles} arm-with-vfpv3.xml"
diff --git a/gdb/gdbserver/linux-aarch32-low.c b/gdb/gdbserver/linux-aarch32-low.c
index 930e73a..bbef721 100644
--- a/gdb/gdbserver/linux-aarch32-low.c
+++ b/gdb/gdbserver/linux-aarch32-low.c
@@ -137,30 +137,9 @@ struct regs_info regs_info_aarch32 =
&aarch32_regsets_info
};
-/* Correct in either endianness. */
-#define arm_abi_breakpoint 0xef9f0001UL
-
-/* For new EABI binaries. We recognize it regardless of which ABI
- is used for gdbserver, so single threaded debugging should work
- OK, but for multi-threaded debugging we only insert the current
- ABI's breakpoint instruction. For now at least. */
-#define arm_eabi_breakpoint 0xe7f001f0UL
-
-#if (defined __ARM_EABI__ || defined __aarch64__)
-static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
-#else
-static const unsigned long arm_breakpoint = arm_abi_breakpoint;
-#endif
-
-#define arm_breakpoint_len 4
-static const unsigned short thumb_breakpoint = 0xde01;
-#define thumb_breakpoint_len 2
-static const unsigned short thumb2_breakpoint[] = { 0xf7f0, 0xa000 };
-#define thumb2_breakpoint_len 4
-
/* Returns 1 if the current instruction set is thumb, 0 otherwise. */
-static int
+int
arm_is_thumb_mode (void)
{
struct regcache *regcache = get_thread_regcache (current_thread, 1);
diff --git a/gdb/gdbserver/linux-aarch32-low.h b/gdb/gdbserver/linux-aarch32-low.h
index 0afddc8..d452894 100644
--- a/gdb/gdbserver/linux-aarch32-low.h
+++ b/gdb/gdbserver/linux-aarch32-low.h
@@ -15,6 +15,27 @@
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
+/* Correct in either endianness. */
+#define arm_abi_breakpoint 0xef9f0001UL
+
+/* For new EABI binaries. We recognize it regardless of which ABI
+ is used for gdbserver, so single threaded debugging should work
+ OK, but for multi-threaded debugging we only insert the current
+ ABI's breakpoint instruction. For now at least. */
+#define arm_eabi_breakpoint 0xe7f001f0UL
+
+#ifndef __ARM_EABI__
+static const unsigned long arm_breakpoint = arm_abi_breakpoint;
+#else
+static const unsigned long arm_breakpoint = arm_eabi_breakpoint;
+#endif
+
+#define arm_breakpoint_len 4
+static const unsigned short thumb_breakpoint = 0xde01;
+#define thumb_breakpoint_len 2
+static const unsigned short thumb2_breakpoint[] = { 0xf7f0, 0xa000 };
+#define thumb2_breakpoint_len 4
+
extern struct regs_info regs_info_aarch32;
void arm_fill_gregset (struct regcache *regcache, void *buf);
@@ -31,4 +52,6 @@ int arm_breakpoint_at (CORE_ADDR where);
void initialize_low_arch_aarch32 (void);
void init_registers_arm_with_neon (void);
+int arm_is_thumb_mode (void);
+
extern const struct target_desc *tdesc_arm_with_neon;
diff --git a/gdb/gdbserver/linux-arm-low.c b/gdb/gdbserver/linux-arm-low.c
index 2e8cd6d..af6df7f 100644
--- a/gdb/gdbserver/linux-arm-low.c
+++ b/gdb/gdbserver/linux-arm-low.c
@@ -19,6 +19,8 @@
#include "server.h"
#include "linux-low.h"
#include "arch/arm.h"
+#include "arch/arm-linux.h"
+#include "arch/arm-get-next-pcs.h"
#include "linux-aarch32-low.h"
#include <sys/uio.h>
@@ -29,6 +31,7 @@
#endif
#include "nat/gdb_ptrace.h"
#include <signal.h>
+#include <sys/syscall.h>
/* Defined in auto-generated files. */
void init_registers_arm (void);
@@ -136,6 +139,27 @@ static int arm_regmap[] = {
64
};
+/* Forward declarations needed for get_next_pcs ops. */
+static ULONGEST get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr,
+ int len,
+ int byte_order);
+
+static CORE_ADDR get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self,
+ CORE_ADDR val);
+
+static CORE_ADDR get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self,
+ CORE_ADDR pc);
+
+static int get_next_pcs_is_thumb (struct arm_get_next_pcs *self);
+
+/* get_next_pcs operations. */
+static struct arm_get_next_pcs_ops get_next_pcs_ops = {
+ get_next_pcs_read_memory_unsigned_integer,
+ get_next_pcs_syscall_next_pc,
+ get_next_pcs_addr_bits_remove,
+ get_next_pcs_is_thumb
+};
+
static int
arm_cannot_store_register (int regno)
{
@@ -198,6 +222,13 @@ arm_fill_vfpregset (struct regcache *regcache, void *buf)
arm_fill_vfpregset_num (regcache, buf, num);
}
+/* Wrapper of UNMAKE_THUMB_ADDR for get_next_pcs. */
+static CORE_ADDR
+get_next_pcs_addr_bits_remove (struct arm_get_next_pcs *self, CORE_ADDR val)
+{
+ return UNMAKE_THUMB_ADDR (val);
+}
+
static void
arm_store_vfpregset (struct regcache *regcache, const void *buf)
{
@@ -233,6 +264,27 @@ arm_set_pc (struct regcache *regcache, CORE_ADDR pc)
supply_register_by_name (regcache, "pc", &newpc);
}
+/* Wrapper of arm_is_thumb_mode for get_next_pcs. */
+static int
+get_next_pcs_is_thumb (struct arm_get_next_pcs *self)
+{
+ return arm_is_thumb_mode ();
+}
+
+/* Read memory from the inferiror.
+ BYTE_ORDER is ignored and there to keep compatiblity with GDB's
+ read_memory_unsigned_integer. */
+static ULONGEST
+get_next_pcs_read_memory_unsigned_integer (CORE_ADDR memaddr,
+ int len,
+ int byte_order)
+{
+ ULONGEST res;
+
+ (*the_target->read_memory) (memaddr, (unsigned char *) &res, len);
+ return res;
+}
+
/* Fetch the thread-local storage pointer for libthread_db. */
ps_err_e
@@ -717,6 +769,77 @@ arm_prepare_to_resume (struct lwp_info *lwp)
}
}
+/* Find the next pc for a sigreturn or rt_sigreturn syscall.
+ See arm-linux.h for stack layout details. */
+static CORE_ADDR
+arm_sigreturn_next_pc (struct regcache *regcache, int svc_number)
+{
+ unsigned long sp;
+ unsigned long sp_data;
+ /* Offset of PC register. */
+ int pc_offset = 0;
+ CORE_ADDR next_pc = 0;
+
+ gdb_assert (svc_number == __NR_sigreturn || svc_number == __NR_rt_sigreturn);
+
+ collect_register_by_name (regcache, "sp", &sp);
+ (*the_target->read_memory) (sp, (unsigned char *) &sp_data, 4);
+
+ pc_offset = arm_linux_sigreturn_next_pc_offset
+ (sp, sp_data, svc_number, __NR_sigreturn == svc_number ? 1 : 0);
+
+ (*the_target->read_memory) (sp + pc_offset, (unsigned char *) &next_pc, 4);
+
+ return next_pc;
+}
+
+/* When PC is at a syscall instruction, return the PC of the next
+ instruction to be executed. */
+static CORE_ADDR
+get_next_pcs_syscall_next_pc (struct arm_get_next_pcs *self, CORE_ADDR pc)
+{
+ CORE_ADDR next_pc = 0;
+ int is_thumb = arm_is_thumb_mode ();
+ ULONGEST svc_number = 0;
+ struct regcache *regcache = self->regcache;
+
+ if (is_thumb)
+ {
+ collect_register (regcache, 7, &svc_number);
+ next_pc = pc + 2;
+ }
+ else
+ {
+ unsigned long this_instr;
+ unsigned long svc_operand;
+
+ (*the_target->read_memory) (pc, (unsigned char *) &this_instr, 4);
+ svc_operand = (0x00ffffff & this_instr);
+
+ if (svc_operand) /* OABI. */
+ {
+ svc_number = svc_operand - 0x900000;
+ }
+ else /* EABI. */
+ {
+ collect_register (regcache, 7, &svc_number);
+ }
+
+ next_pc = pc + 4;
+ }
+
+ /* This is a sigreturn or sigreturn_rt syscall. */
+ if (svc_number == __NR_sigreturn || svc_number == __NR_rt_sigreturn)
+ {
+ next_pc = arm_sigreturn_next_pc (regcache, svc_number);
+ }
+
+ /* Addresses for calling Thumb functions have the bit 0 set. */
+ if (is_thumb)
+ next_pc = MAKE_THUMB_ADDR (next_pc);
+
+ return next_pc;
+}
static int
arm_get_hwcap (unsigned long *valp)
@@ -806,6 +929,27 @@ arm_arch_setup (void)
have_ptrace_getregset = 0;
}
+/* Fetch the next possible PCs after the current instruction executes. */
+
+static VEC (CORE_ADDR) *
+arm_gdbserver_get_next_pcs (CORE_ADDR pc, struct regcache *regcache)
+{
+ struct arm_get_next_pcs next_pcs_ctx;
+ VEC (CORE_ADDR) *next_pcs = NULL;
+
+ arm_get_next_pcs_ctor (&next_pcs_ctx,
+ &get_next_pcs_ops,
+ /* Byte order is ignored assumed as host. */
+ 0,
+ 0,
+ (const gdb_byte *) &thumb2_breakpoint,
+ regcache);
+
+ next_pcs = arm_get_next_pcs (&next_pcs_ctx, pc);
+
+ return next_pcs;
+}
+
/* Support for hardware single step. */
static int
@@ -871,7 +1015,7 @@ struct linux_target_ops the_low_target = {
arm_set_pc,
arm_breakpoint_kind_from_pc,
arm_sw_breakpoint_from_kind,
- NULL, /* get_next_pcs */
+ arm_gdbserver_get_next_pcs,
0,
arm_breakpoint_at,
arm_supports_z_point_type,
diff --git a/gdb/gdbserver/linux-low.h b/gdb/gdbserver/linux-low.h
index cd455a8..8eaad3e 100644
--- a/gdb/gdbserver/linux-low.h
+++ b/gdb/gdbserver/linux-low.h
@@ -124,8 +124,6 @@ struct process_info_private
struct lwp_info;
-DEF_VEC_I (CORE_ADDR);
-
struct linux_target_ops
{
/* Architecture-specific setup. */
diff --git a/gdb/gdbserver/server.h b/gdb/gdbserver/server.h
index 18095f2..498367c 100644
--- a/gdb/gdbserver/server.h
+++ b/gdb/gdbserver/server.h
@@ -123,6 +123,7 @@ extern void discard_queued_stop_replies (ptid_t ptid);
#include "utils.h"
#include "debug.h"
+#include "gdb_vecs.h"
/* Maximum number of bytes to read/write at once. The value here
is chosen to fill up a packet (the headers account for the 32). */
diff --git a/gdb/symtab.h b/gdb/symtab.h
index 37c8c93..b522726 100644
--- a/gdb/symtab.h
+++ b/gdb/symtab.h
@@ -1613,8 +1613,6 @@ void iterate_over_symtabs (const char *name,
void *data),
void *data);
-DEF_VEC_I (CORE_ADDR);
-
VEC (CORE_ADDR) *find_pcs_for_symtab_line (struct symtab *symtab, int line,
struct linetable_entry **best_entry);
--
2.6.3
^ permalink raw reply [flat|nested] 25+ messages in thread* [PATCH v8 3/7] Refactor arm_software_single_step to use regcache
2015-12-17 14:14 [PATCH v8 0/7] Support software single step and conditional breakpoints on ARM in GDBServer Antoine Tremblay
` (4 preceding siblings ...)
2015-12-17 14:15 ` [PATCH v8 6/7] Enable software single stepping for while-stepping actions in GDBServer Antoine Tremblay
@ 2015-12-17 14:15 ` Antoine Tremblay
2016-01-18 10:35 ` Yao Qi
2015-12-17 14:15 ` [PATCH v8 4/7] Share regcache function regcache_raw_read_unsigned Antoine Tremblay
` (2 subsequent siblings)
8 siblings, 1 reply; 25+ messages in thread
From: Antoine Tremblay @ 2015-12-17 14:15 UTC (permalink / raw)
To: gdb-patches; +Cc: Antoine Tremblay
This patch is in preparation for software single step support on ARM in
GDBServer. It refactors arm_*_software_single_step and sub-functions to
use regcache instead of frame to access registers so that the code can be
shared more easily between GDB and GDBServer.
Note also that since the intention is at some point to get rid of frame
completely in that function, memory reads have also been replaced by
read_memory_unsigned_integer rather than get_frame_memory_unsigned.
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* arm-linux-tdep.c (arm_linux_sigreturn_next_pc_offset): New function.
(arm_linux_sigreturn_next_pc): Likewise.
(arm_linux_syscall_next_pc): Use regcache instead of frame.
(arm_linux_software_single_step): Likewise.
* arm-tdep.c (arm_is_thumb): New function.
(shifted_reg_va): Use regcache instead of frame.
(thumb_get_next_pc_raw): Likewise.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_software_single_step): Likewise.
* arm-tdep.h (struct gdbarch_tdep): Use regcache for syscall_next_pc.
(arm_get_next_pc): Use regcache.
(arm_deal_with_atomic_sequence): Likewise.
(arm_is_thumb): New declaration.
* regcache.c (regcache_raw_get_unsigned): New function.
* regcache.h (regcache_raw_get_unsigned): New function declaration.
---
gdb/arm-linux-tdep.c | 109 +++++++++++++++++++++++++++++++++++-------
gdb/arm-tdep.c | 132 +++++++++++++++++++++++++++++----------------------
gdb/arm-tdep.h | 9 ++--
gdb/regcache.c | 15 ++++++
gdb/regcache.h | 4 ++
5 files changed, 190 insertions(+), 79 deletions(-)
diff --git a/gdb/arm-linux-tdep.c b/gdb/arm-linux-tdep.c
index 73e1271..e06cf77 100644
--- a/gdb/arm-linux-tdep.c
+++ b/gdb/arm-linux-tdep.c
@@ -257,6 +257,11 @@ static const gdb_byte arm_linux_thumb2_le_breakpoint[] = { 0xf0, 0xf7, 0x00, 0xa
#define ARM_LDR_PC_SP_12 0xe49df00c
#define ARM_LDR_PC_SP_4 0xe49df004
+/* Syscall number for sigreturn. */
+#define ARM_SIGRETURN 119
+/* Syscall number for rt_sigreturn. */
+#define ARM_RT_SIGRETURN 173
+
static void
arm_linux_sigtramp_cache (struct frame_info *this_frame,
struct trad_frame_cache *this_cache,
@@ -805,6 +810,70 @@ arm_linux_sigreturn_return_addr (struct frame_info *frame,
return 0;
}
+/* Calculate the offset from stack pointer of the pc register on the stack
+ in the case of a sigreturn or sigreturn_rt syscall. */
+static int
+arm_linux_sigreturn_next_pc_offset (unsigned long sp,
+ unsigned long sp_data,
+ unsigned long svc_number,
+ int is_sigreturn)
+{
+ /* Offset of R0 register. */
+ int r0_offset = 0;
+ /* Offset of PC register. */
+ int pc_offset = 0;
+
+ if (is_sigreturn)
+ {
+ if (sp_data == ARM_NEW_SIGFRAME_MAGIC)
+ r0_offset = ARM_UCONTEXT_SIGCONTEXT + ARM_SIGCONTEXT_R0;
+ else
+ r0_offset = ARM_SIGCONTEXT_R0;
+ }
+ else
+ {
+ if (sp_data == sp + ARM_OLD_RT_SIGFRAME_SIGINFO)
+ r0_offset = ARM_OLD_RT_SIGFRAME_UCONTEXT;
+ else
+ r0_offset = ARM_NEW_RT_SIGFRAME_UCONTEXT;
+
+ r0_offset += ARM_UCONTEXT_SIGCONTEXT + ARM_SIGCONTEXT_R0;
+ }
+
+ pc_offset = r0_offset + INT_REGISTER_SIZE * ARM_PC_REGNUM;
+
+ return pc_offset;
+}
+
+/* Find the value of the next PC after a sigreturn or rt_sigreturn syscall
+ based on current processor state. */
+static CORE_ADDR
+arm_linux_sigreturn_next_pc (struct regcache *regcache,
+ unsigned long svc_number)
+{
+ ULONGEST sp;
+ unsigned long sp_data;
+ CORE_ADDR next_pc = 0;
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+ int pc_offset = 0;
+ int is_sigreturn = 0;
+
+ gdb_assert (svc_number == ARM_SIGRETURN
+ || svc_number == ARM_RT_SIGRETURN);
+
+ is_sigreturn = (svc_number == ARM_SIGRETURN);
+ regcache_cooked_read_unsigned (regcache, ARM_SP_REGNUM, &sp);
+ sp_data = read_memory_unsigned_integer (sp, 4, byte_order);
+
+ pc_offset = arm_linux_sigreturn_next_pc_offset (sp, sp_data, svc_number,
+ is_sigreturn);
+
+ next_pc = read_memory_unsigned_integer (sp + pc_offset, 4, byte_order);
+
+ return next_pc;
+}
+
/* At a ptrace syscall-stop, return the syscall number. This either
comes from the SWI instruction (OABI) or from r7 (EABI).
@@ -858,25 +927,26 @@ arm_linux_get_syscall_number (struct gdbarch *gdbarch,
return svc_number;
}
-/* When FRAME is at a syscall instruction, return the PC of the next
- instruction to be executed. */
+/* When the processor is at a syscall instruction, return the PC of the
+ next instruction to be executed. */
static CORE_ADDR
-arm_linux_syscall_next_pc (struct frame_info *frame)
+arm_linux_syscall_next_pc (struct regcache *regcache)
{
- CORE_ADDR pc = get_frame_pc (frame);
- CORE_ADDR return_addr = 0;
- int is_thumb = arm_frame_is_thumb (frame);
+ CORE_ADDR pc = regcache_read_pc (regcache);
+ CORE_ADDR next_pc = 0;
+ int is_thumb = arm_is_thumb (regcache);
ULONGEST svc_number = 0;
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
if (is_thumb)
{
- svc_number = get_frame_register_unsigned (frame, 7);
- return_addr = pc + 2;
+ svc_number = regcache_raw_get_unsigned (regcache, 7);
+ next_pc = pc + 2;
}
else
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
enum bfd_endian byte_order_for_code =
gdbarch_byte_order_for_code (gdbarch);
unsigned long this_instr =
@@ -889,19 +959,20 @@ arm_linux_syscall_next_pc (struct frame_info *frame)
}
else /* EABI. */
{
- svc_number = get_frame_register_unsigned (frame, 7);
+ svc_number = regcache_raw_get_unsigned (regcache, 7);
}
- return_addr = pc + 4;
+ next_pc = pc + 4;
}
- arm_linux_sigreturn_return_addr (frame, svc_number, &return_addr, &is_thumb);
+ if (svc_number == ARM_SIGRETURN || svc_number == ARM_RT_SIGRETURN)
+ next_pc = arm_linux_sigreturn_next_pc (regcache, svc_number);
/* Addresses for calling Thumb functions have the bit 0 set. */
if (is_thumb)
- return_addr |= 1;
+ next_pc = MAKE_THUMB_ADDR (next_pc);
- return return_addr;
+ return next_pc;
}
@@ -910,11 +981,13 @@ arm_linux_syscall_next_pc (struct frame_info *frame)
static int
arm_linux_software_single_step (struct frame_info *frame)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct address_space *aspace = get_regcache_aspace (regcache);
+
CORE_ADDR next_pc;
- if (arm_deal_with_atomic_sequence (frame))
+ if (arm_deal_with_atomic_sequence (regcache))
return 1;
/* If the target does have hardware single step, GDB doesn't have
@@ -922,7 +995,7 @@ arm_linux_software_single_step (struct frame_info *frame)
if (target_can_do_single_step () == 1)
return 0;
- next_pc = arm_get_next_pc (frame, get_frame_pc (frame));
+ next_pc = arm_get_next_pc (regcache, regcache_read_pc (regcache));
/* The Linux kernel offers some user-mode helpers in a high page. We can
not read this page (as of 2.6.23), and even if we could then we couldn't
diff --git a/gdb/arm-tdep.c b/gdb/arm-tdep.c
index 848af97..ebe4c40 100644
--- a/gdb/arm-tdep.c
+++ b/gdb/arm-tdep.c
@@ -281,6 +281,19 @@ arm_psr_thumb_bit (struct gdbarch *gdbarch)
return CPSR_T;
}
+/* Determine if the processor is currently executing in Thumb mode. */
+
+int
+arm_is_thumb (struct regcache *regcache)
+{
+ ULONGEST cpsr;
+ ULONGEST t_bit = arm_psr_thumb_bit (get_regcache_arch (regcache));
+
+ cpsr = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
+
+ return (cpsr & t_bit) != 0;
+}
+
/* Determine if FRAME is executing in Thumb mode. */
int
@@ -4302,7 +4315,7 @@ convert_to_extended (const struct floatformat *fmt, void *dbl, const void *ptr,
}
static unsigned long
-shifted_reg_val (struct frame_info *frame, unsigned long inst, int carry,
+shifted_reg_val (struct regcache *regcache, unsigned long inst, int carry,
unsigned long pc_val, unsigned long status_reg)
{
unsigned long res, shift;
@@ -4313,14 +4326,14 @@ shifted_reg_val (struct frame_info *frame, unsigned long inst, int carry,
{
int rs = bits (inst, 8, 11);
shift = (rs == 15 ? pc_val + 8
- : get_frame_register_unsigned (frame, rs)) & 0xFF;
+ : regcache_raw_get_unsigned (regcache, rs)) & 0xFF;
}
else
shift = bits (inst, 7, 11);
res = (rm == ARM_PC_REGNUM
? (pc_val + (bit (inst, 4) ? 12 : 8))
- : get_frame_register_unsigned (frame, rm));
+ : regcache_raw_get_unsigned (regcache, rm));
switch (shifttype)
{
@@ -4372,10 +4385,10 @@ thumb_advance_itstate (unsigned int itstate)
another breakpoint by our caller. */
static CORE_ADDR
-thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
+thumb_get_next_pc_raw (struct regcache *regcache, CORE_ADDR pc)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct address_space *aspace = get_regcache_aspace (regcache);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
unsigned long pc_val = ((unsigned long) pc) + 4; /* PC after prefetch */
@@ -4397,7 +4410,7 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
base condition. One of the low four bits will be set if an IT
block is active. These bits read as zero on earlier
processors. */
- status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
+ status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
/* If-Then handling. On GNU/Linux, where this routine is used, we
@@ -4512,7 +4525,7 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
/* Fetch the saved PC from the stack. It's stored above
all of the other registers. */
offset = bitcount (bits (inst1, 0, 7)) * INT_REGISTER_SIZE;
- sp = get_frame_register_unsigned (frame, ARM_SP_REGNUM);
+ sp = regcache_raw_get_unsigned (regcache, ARM_SP_REGNUM);
nextpc = read_memory_unsigned_integer (sp + offset, 4, byte_order);
}
else if ((inst1 & 0xf000) == 0xd000) /* conditional branch */
@@ -4524,7 +4537,7 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
tdep = gdbarch_tdep (gdbarch);
if (tdep->syscall_next_pc != NULL)
- nextpc = tdep->syscall_next_pc (frame);
+ nextpc = tdep->syscall_next_pc (regcache);
}
else if (cond != 0x0f && condition_true (cond, status))
@@ -4568,7 +4581,7 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
else if (inst1 == 0xf3de && (inst2 & 0xff00) == 0x3f00)
{
/* SUBS PC, LR, #imm8. */
- nextpc = get_frame_register_unsigned (frame, ARM_LR_REGNUM);
+ nextpc = regcache_raw_get_unsigned (regcache, ARM_LR_REGNUM);
nextpc -= inst2 & 0x00ff;
}
else if ((inst2 & 0xd000) == 0x8000 && (inst1 & 0x0380) != 0x0380)
@@ -4626,14 +4639,15 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
if (load_pc)
{
- CORE_ADDR addr = get_frame_register_unsigned (frame, rn);
- nextpc = get_frame_memory_unsigned (frame, addr + offset, 4);
+ CORE_ADDR addr = regcache_raw_get_unsigned (regcache, rn);
+ nextpc = read_memory_unsigned_integer (addr + offset, 4,
+ byte_order);
}
}
else if ((inst1 & 0xffef) == 0xea4f && (inst2 & 0xfff0) == 0x0f00)
{
/* MOV PC or MOVS PC. */
- nextpc = get_frame_register_unsigned (frame, bits (inst2, 0, 3));
+ nextpc = regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
nextpc = MAKE_THUMB_ADDR (nextpc);
}
else if ((inst1 & 0xff70) == 0xf850 && (inst2 & 0xf000) == 0xf000)
@@ -4643,7 +4657,7 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
int rn, load_pc = 1;
rn = bits (inst1, 0, 3);
- base = get_frame_register_unsigned (frame, rn);
+ base = regcache_raw_get_unsigned (regcache, rn);
if (rn == ARM_PC_REGNUM)
{
base = (base + 4) & ~(CORE_ADDR) 0x3;
@@ -4667,14 +4681,14 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
else if ((inst2 & 0x0fc0) == 0x0000)
{
int shift = bits (inst2, 4, 5), rm = bits (inst2, 0, 3);
- base += get_frame_register_unsigned (frame, rm) << shift;
+ base += regcache_raw_get_unsigned (regcache, rm) << shift;
}
else
/* Reserved. */
load_pc = 0;
if (load_pc)
- nextpc = get_frame_memory_unsigned (frame, base, 4);
+ nextpc = read_memory_unsigned_integer (base, 4, byte_order);
}
else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf000)
{
@@ -4685,10 +4699,11 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
if (tbl_reg == 0x0f)
table = pc + 4; /* Regcache copy of PC isn't right yet. */
else
- table = get_frame_register_unsigned (frame, tbl_reg);
+ table = regcache_raw_get_unsigned (regcache, tbl_reg);
- offset = get_frame_register_unsigned (frame, bits (inst2, 0, 3));
- length = 2 * get_frame_memory_unsigned (frame, table + offset, 1);
+ offset = regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
+ length = 2 * read_memory_unsigned_integer (table + offset, 1,
+ byte_order);
nextpc = pc_val + length;
}
else if ((inst1 & 0xfff0) == 0xe8d0 && (inst2 & 0xfff0) == 0xf010)
@@ -4700,10 +4715,11 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
if (tbl_reg == 0x0f)
table = pc + 4; /* Regcache copy of PC isn't right yet. */
else
- table = get_frame_register_unsigned (frame, tbl_reg);
+ table = regcache_raw_get_unsigned (regcache, tbl_reg);
- offset = 2 * get_frame_register_unsigned (frame, bits (inst2, 0, 3));
- length = 2 * get_frame_memory_unsigned (frame, table + offset, 2);
+ offset = 2 * regcache_raw_get_unsigned (regcache, bits (inst2, 0, 3));
+ length = 2 * read_memory_unsigned_integer (table + offset, 2,
+ byte_order);
nextpc = pc_val + length;
}
}
@@ -4712,14 +4728,14 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
if (bits (inst1, 3, 6) == 0x0f)
nextpc = UNMAKE_THUMB_ADDR (pc_val);
else
- nextpc = get_frame_register_unsigned (frame, bits (inst1, 3, 6));
+ nextpc = regcache_raw_get_unsigned (regcache, bits (inst1, 3, 6));
}
else if ((inst1 & 0xff87) == 0x4687) /* mov pc, REG */
{
if (bits (inst1, 3, 6) == 0x0f)
nextpc = pc_val;
else
- nextpc = get_frame_register_unsigned (frame, bits (inst1, 3, 6));
+ nextpc = regcache_raw_get_unsigned (regcache, bits (inst1, 3, 6));
nextpc = MAKE_THUMB_ADDR (nextpc);
}
@@ -4727,7 +4743,7 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
{
/* CBNZ or CBZ. */
int imm = (bit (inst1, 9) << 6) + (bits (inst1, 3, 7) << 1);
- ULONGEST reg = get_frame_register_unsigned (frame, bits (inst1, 0, 2));
+ ULONGEST reg = regcache_raw_get_unsigned (regcache, bits (inst1, 0, 2));
if (bit (inst1, 11) && reg != 0)
nextpc = pc_val + imm;
@@ -4746,9 +4762,9 @@ thumb_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
address. */
static CORE_ADDR
-arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
+arm_get_next_pc_raw (struct regcache *regcache, CORE_ADDR pc)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
unsigned long pc_val;
@@ -4759,7 +4775,7 @@ arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
pc_val = (unsigned long) pc;
this_instr = read_memory_unsigned_integer (pc, 4, byte_order_for_code);
- status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
+ status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
nextpc = (CORE_ADDR) (pc_val + 4); /* Default case */
if (bits (this_instr, 28, 31) == INST_NV)
@@ -4809,7 +4825,7 @@ arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
rn = bits (this_instr, 0, 3);
nextpc = ((rn == ARM_PC_REGNUM)
? (pc_val + 8)
- : get_frame_register_unsigned (frame, rn));
+ : regcache_raw_get_unsigned (regcache, rn));
return nextpc;
}
@@ -4819,7 +4835,7 @@ arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
rn = bits (this_instr, 16, 19);
operand1 = ((rn == ARM_PC_REGNUM)
? (pc_val + 8)
- : get_frame_register_unsigned (frame, rn));
+ : regcache_raw_get_unsigned (regcache, rn));
if (bit (this_instr, 25))
{
@@ -4829,7 +4845,7 @@ arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
& 0xffffffff;
}
else /* operand 2 is a shifted register. */
- operand2 = shifted_reg_val (frame, this_instr, c,
+ operand2 = shifted_reg_val (regcache, this_instr, c,
pc_val, status);
switch (bits (this_instr, 21, 24))
@@ -4928,7 +4944,7 @@ arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
rn = bits (this_instr, 16, 19);
base = ((rn == ARM_PC_REGNUM)
? (pc_val + 8)
- : get_frame_register_unsigned (frame, rn));
+ : regcache_raw_get_unsigned (regcache, rn));
if (bit (this_instr, 24))
{
@@ -4936,7 +4952,8 @@ arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
int c = (status & FLAG_C) ? 1 : 0;
unsigned long offset =
(bit (this_instr, 25)
- ? shifted_reg_val (frame, this_instr, c, pc_val, status)
+ ? shifted_reg_val (regcache, this_instr, c, pc_val,
+ status)
: bits (this_instr, 0, 11));
if (bit (this_instr, 23))
@@ -4961,8 +4978,8 @@ arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
/* loading pc */
int offset = 0;
unsigned long rn_val
- = get_frame_register_unsigned (frame,
- bits (this_instr, 16, 19));
+ = regcache_raw_get_unsigned (regcache,
+ bits (this_instr, 16, 19));
if (bit (this_instr, 23))
{
@@ -5000,7 +5017,7 @@ arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
tdep = gdbarch_tdep (gdbarch);
if (tdep->syscall_next_pc != NULL)
- nextpc = tdep->syscall_next_pc (frame);
+ nextpc = tdep->syscall_next_pc (regcache);
}
break;
@@ -5019,14 +5036,14 @@ arm_get_next_pc_raw (struct frame_info *frame, CORE_ADDR pc)
loop is detected. */
CORE_ADDR
-arm_get_next_pc (struct frame_info *frame, CORE_ADDR pc)
+arm_get_next_pc (struct regcache *regcache, CORE_ADDR pc)
{
CORE_ADDR nextpc;
- if (arm_frame_is_thumb (frame))
- nextpc = thumb_get_next_pc_raw (frame, pc);
+ if (arm_is_thumb (regcache))
+ nextpc = thumb_get_next_pc_raw (regcache, pc);
else
- nextpc = arm_get_next_pc_raw (frame, pc);
+ nextpc = arm_get_next_pc_raw (regcache, pc);
return nextpc;
}
@@ -5057,12 +5074,12 @@ arm_insert_single_step_breakpoint (struct gdbarch *gdbarch,
the sequence. */
static int
-thumb_deal_with_atomic_sequence_raw (struct frame_info *frame)
+thumb_deal_with_atomic_sequence_raw (struct regcache *regcache)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct address_space *aspace = get_regcache_aspace (regcache);
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- CORE_ADDR pc = get_frame_pc (frame);
+ CORE_ADDR pc = regcache_read_pc (regcache);
CORE_ADDR breaks[2] = {-1, -1};
CORE_ADDR loc = pc;
unsigned short insn1, insn2;
@@ -5073,7 +5090,7 @@ thumb_deal_with_atomic_sequence_raw (struct frame_info *frame)
ULONGEST status, itstate;
/* We currently do not support atomic sequences within an IT block. */
- status = get_frame_register_unsigned (frame, ARM_PS_REGNUM);
+ status = regcache_raw_get_unsigned (regcache, ARM_PS_REGNUM);
itstate = ((status >> 8) & 0xfc) | ((status >> 25) & 0x3);
if (itstate & 0x0f)
return 0;
@@ -5188,12 +5205,12 @@ thumb_deal_with_atomic_sequence_raw (struct frame_info *frame)
}
static int
-arm_deal_with_atomic_sequence_raw (struct frame_info *frame)
+arm_deal_with_atomic_sequence_raw (struct regcache *regcache)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct address_space *aspace = get_regcache_aspace (regcache);
enum bfd_endian byte_order_for_code = gdbarch_byte_order_for_code (gdbarch);
- CORE_ADDR pc = get_frame_pc (frame);
+ CORE_ADDR pc = regcache_read_pc (regcache);
CORE_ADDR breaks[2] = {-1, -1};
CORE_ADDR loc = pc;
unsigned int insn;
@@ -5263,12 +5280,12 @@ arm_deal_with_atomic_sequence_raw (struct frame_info *frame)
}
int
-arm_deal_with_atomic_sequence (struct frame_info *frame)
+arm_deal_with_atomic_sequence (struct regcache *regcache)
{
- if (arm_frame_is_thumb (frame))
- return thumb_deal_with_atomic_sequence_raw (frame);
+ if (arm_is_thumb (regcache))
+ return thumb_deal_with_atomic_sequence_raw (regcache);
else
- return arm_deal_with_atomic_sequence_raw (frame);
+ return arm_deal_with_atomic_sequence_raw (regcache);
}
/* single_step() is called just before we want to resume the inferior,
@@ -5279,14 +5296,15 @@ arm_deal_with_atomic_sequence (struct frame_info *frame)
int
arm_software_single_step (struct frame_info *frame)
{
- struct gdbarch *gdbarch = get_frame_arch (frame);
- struct address_space *aspace = get_frame_address_space (frame);
+ struct regcache *regcache = get_current_regcache ();
+ struct gdbarch *gdbarch = get_regcache_arch (regcache);
+ struct address_space *aspace = get_regcache_aspace (regcache);
CORE_ADDR next_pc;
- if (arm_deal_with_atomic_sequence (frame))
+ if (arm_deal_with_atomic_sequence (regcache))
return 1;
- next_pc = arm_get_next_pc (frame, get_frame_pc (frame));
+ next_pc = arm_get_next_pc (regcache, regcache_read_pc (regcache));
arm_insert_single_step_breakpoint (gdbarch, aspace, next_pc);
return 1;
diff --git a/gdb/arm-tdep.h b/gdb/arm-tdep.h
index 9b8447b..0063fef 100644
--- a/gdb/arm-tdep.h
+++ b/gdb/arm-tdep.h
@@ -135,9 +135,9 @@ struct gdbarch_tdep
struct type *neon_double_type;
struct type *neon_quad_type;
- /* Return the expected next PC if FRAME is stopped at a syscall
+ /* Return the expected next PC if the program is stopped at a syscall
instruction. */
- CORE_ADDR (*syscall_next_pc) (struct frame_info *frame);
+ CORE_ADDR (*syscall_next_pc) (struct regcache *regcache);
/* syscall record. */
int (*arm_syscall_record) (struct regcache *regcache, unsigned long svc_number);
@@ -250,11 +250,12 @@ extern void
ULONGEST val, enum pc_write_style write_pc);
CORE_ADDR arm_skip_stub (struct frame_info *, CORE_ADDR);
-CORE_ADDR arm_get_next_pc (struct frame_info *, CORE_ADDR);
+CORE_ADDR arm_get_next_pc (struct regcache *regcache, CORE_ADDR pc);
void arm_insert_single_step_breakpoint (struct gdbarch *,
struct address_space *, CORE_ADDR);
-int arm_deal_with_atomic_sequence (struct frame_info *);
+int arm_deal_with_atomic_sequence (struct regcache *);
int arm_software_single_step (struct frame_info *);
+int arm_is_thumb (struct regcache *regcache);
int arm_frame_is_thumb (struct frame_info *frame);
extern struct displaced_step_closure *
diff --git a/gdb/regcache.c b/gdb/regcache.c
index 5ee31fb..7fb9d18 100644
--- a/gdb/regcache.c
+++ b/gdb/regcache.c
@@ -715,6 +715,21 @@ regcache_raw_read_unsigned (struct regcache *regcache, int regnum,
return status;
}
+/* Return the register's value or throw if it's not available. */
+
+ULONGEST
+regcache_raw_get_unsigned (struct regcache *regcache, int regnum)
+{
+ ULONGEST value;
+ enum register_status status;
+
+ status = regcache_raw_read_unsigned (regcache, regnum, &value);
+ if (status == REG_UNAVAILABLE)
+ throw_error (NOT_AVAILABLE_ERROR,
+ _("Register %d is not available"), regnum);
+ return value;
+}
+
void
regcache_raw_write_signed (struct regcache *regcache, int regnum, LONGEST val)
{
diff --git a/gdb/regcache.h b/gdb/regcache.h
index a9fb44b..c9d9a7d 100644
--- a/gdb/regcache.h
+++ b/gdb/regcache.h
@@ -81,6 +81,10 @@ extern enum register_status
extern enum register_status
regcache_raw_read_unsigned (struct regcache *regcache,
int regnum, ULONGEST *val);
+
+ULONGEST regcache_raw_get_unsigned (struct regcache *regcache,
+ int regnum);
+
extern void regcache_raw_write_signed (struct regcache *regcache,
int regnum, LONGEST val);
extern void regcache_raw_write_unsigned (struct regcache *regcache,
--
2.6.3
^ permalink raw reply [flat|nested] 25+ messages in thread