From: Tom Tromey <tom@tromey.com>
To: gdb-patches@sourceware.org
Cc: Tom Tromey <tom@tromey.com>
Subject: [RFA v2 06/24] Change open_terminal_stream to return a gdb_file_up
Date: Tue, 25 Jul 2017 17:24:00 -0000 [thread overview]
Message-ID: <20170725172107.9799-7-tom@tromey.com> (raw)
In-Reply-To: <20170725172107.9799-1-tom@tromey.com>
This changes open_terminal_stream to return a gdb_file_up, eliminating
another use of make_cleanup_fclose. Arguably perhaps new_ui should
take ownership of the files using a move, but there is at least one
spot where this isn't appropriate (or at least not currently done), so
I elected to use a more minimal approach.
ChangeLog
2017-07-25 Tom Tromey <tom@tromey.com>
* top.c (open_terminal_stream): Return gdb_file_up.
(new_ui_command): Update.
---
gdb/ChangeLog | 5 +++++
gdb/top.c | 24 ++++++++++++------------
2 files changed, 17 insertions(+), 12 deletions(-)
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 4c23f79..c1730dd 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,10 @@
2017-07-25 Tom Tromey <tom@tromey.com>
+ * top.c (open_terminal_stream): Return gdb_file_up.
+ (new_ui_command): Update.
+
+2017-07-25 Tom Tromey <tom@tromey.com>
+
* source.c (print_source_lines_base, forward_search_command)
(reverse_search_command): Use gdb_file_up.
diff --git a/gdb/top.c b/gdb/top.c
index 4c53efd..2504eb6 100644
--- a/gdb/top.c
+++ b/gdb/top.c
@@ -346,16 +346,16 @@ make_delete_ui_cleanup (struct ui *ui)
/* Open file named NAME for read/write, making sure not to make it the
controlling terminal. */
-static FILE *
+static gdb_file_up
open_terminal_stream (const char *name)
{
int fd;
- fd = open (name, O_RDWR | O_NOCTTY);
+ fd = gdb_open_cloexec (name, O_RDWR | O_NOCTTY, 0);
if (fd < 0)
perror_with_name (_("opening terminal failed"));
- return fdopen (fd, "w+");
+ return gdb_file_up (fdopen (fd, "w+"));
}
/* Implementation of the "new-ui" command. */
@@ -365,7 +365,7 @@ new_ui_command (char *args, int from_tty)
{
struct ui *ui;
struct interp *interp;
- FILE *stream[3] = { NULL, NULL, NULL };
+ gdb_file_up stream[3];
int i;
int res;
int argc;
@@ -390,18 +390,13 @@ new_ui_command (char *args, int from_tty)
{
scoped_restore save_ui = make_scoped_restore (¤t_ui);
- failure_chain = make_cleanup (null_cleanup, NULL);
-
/* Open specified terminal, once for each of
stdin/stdout/stderr. */
for (i = 0; i < 3; i++)
- {
- stream[i] = open_terminal_stream (tty_name);
- make_cleanup_fclose (stream[i]);
- }
+ stream[i] = open_terminal_stream (tty_name);
- ui = new_ui (stream[0], stream[1], stream[2]);
- make_cleanup (delete_ui_cleanup, ui);
+ ui = new_ui (stream[0].get (), stream[1].get (), stream[2].get ());
+ failure_chain = make_cleanup (delete_ui_cleanup, ui);
ui->async = 1;
@@ -411,6 +406,11 @@ new_ui_command (char *args, int from_tty)
interp_pre_command_loop (top_level_interpreter ());
+ /* Make sure the files are not closed. */
+ stream[0].release ();
+ stream[1].release ();
+ stream[2].release ();
+
discard_cleanups (failure_chain);
/* This restores the previous UI and frees argv. */
--
2.9.3
next prev parent reply other threads:[~2017-07-25 17:24 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-25 17:24 [RFA v2 00/24] More miscellaneous C++-ification Tom Tromey
2017-07-25 17:21 ` [RFA v2 22/24] Introduce gdb_argv, a class wrapper for buildargv Tom Tromey
2017-07-31 20:22 ` Simon Marchi
2017-07-25 17:21 ` [RFA v2 23/24] Use gdb_argv in Python Tom Tromey
2017-07-31 20:26 ` Simon Marchi
2017-07-25 17:21 ` [RFA v2 19/24] Replace do_restore_instream_cleanup with scoped_restore Tom Tromey
2017-07-25 17:21 ` [RFA v2 18/24] Use a scoped_restore for command_nest_depth Tom Tromey
2017-07-25 17:22 ` [RFA v2 16/24] Remove in_user_command Tom Tromey
2017-07-25 17:22 ` [RFA v2 12/24] More uses of scoped_restore Tom Tromey
2017-07-25 17:22 ` [RFA v2 05/24] Use gdb_file_up in source.c Tom Tromey
2017-07-30 18:59 ` Simon Marchi
2017-07-25 17:24 ` [RFA v2 24/24] Remove make_cleanup_freeargv and gdb_buildargv Tom Tromey
2017-07-31 20:26 ` Simon Marchi
2017-07-25 17:24 ` [RFA v2 09/24] Remove close cleanup Tom Tromey
2017-07-31 19:09 ` Simon Marchi
2017-07-25 17:24 ` [RFA v2 08/24] Remove an unlink cleanup Tom Tromey
2017-07-31 18:47 ` Simon Marchi
2017-07-25 17:24 ` Tom Tromey [this message]
2017-07-30 19:04 ` [RFA v2 06/24] Change open_terminal_stream to return a gdb_file_up Simon Marchi
2017-07-25 17:25 ` [RFA v2 10/24] Remove make_cleanup_restore_current_language Tom Tromey
2017-07-31 19:21 ` Simon Marchi
2017-07-31 22:17 ` Tom Tromey
2017-08-01 8:44 ` Simon Marchi
2017-07-25 17:26 ` [RFA v2 01/24] Introduce and use ui_out_emit_table Tom Tromey
2017-07-29 23:10 ` Simon Marchi
2017-07-30 16:23 ` Tom Tromey
2017-07-30 18:29 ` Simon Marchi
2017-07-31 22:12 ` Tom Tromey
2017-07-25 17:26 ` [RFA v2 02/24] Introduce and use gdb_file_up Tom Tromey
2017-07-29 23:40 ` Simon Marchi
2017-07-30 16:25 ` Tom Tromey
2017-07-30 18:31 ` Simon Marchi
2017-07-25 17:26 ` [RFA v2 04/24] Use gdb_file_up in fbsd-nat.c Tom Tromey
2017-07-29 23:56 ` Simon Marchi
2017-07-25 17:26 ` [RFA v2 21/24] Remove a cleanup in Python Tom Tromey
2017-07-25 17:26 ` [RFA v2 07/24] Remove make_cleanup_fclose Tom Tromey
2017-07-30 19:05 ` Simon Marchi
2017-07-25 17:27 ` [RFA v2 03/24] Change return type of find_and_open_script Tom Tromey
2017-07-29 23:54 ` Simon Marchi
2017-07-30 16:27 ` Tom Tromey
2017-07-25 17:27 ` [RFA v2 15/24] Use containers to avoid cleanups Tom Tromey
2017-07-31 19:42 ` Simon Marchi
2017-07-25 17:27 ` [RFA v2 13/24] Replace tui_restore_gdbout with scoped_restore Tom Tromey
2017-07-25 17:27 ` [RFA v2 14/24] Use unique_xmalloc_ptr in jit.c Tom Tromey
2017-07-31 19:25 ` Simon Marchi
2017-07-25 17:51 ` [RFA v2 20/24] Avoid some manual memory management in Python Tom Tromey
2017-07-25 18:02 ` [RFA v2 17/24] Remove user_call_depth Tom Tromey
2017-07-31 19:46 ` Simon Marchi
2017-07-25 18:04 ` [RFA v2 11/24] Remove make_cleanup_free_so Tom Tromey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170725172107.9799-7-tom@tromey.com \
--to=tom@tromey.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).