From: Tom de Vries <tdevries@suse.de>
To: Gary Benson <gbenson@redhat.com>
Cc: Simon Marchi <simon.marchi@polymtl.ca>,
gdb-patches@sourceware.org, Pedro Alves <palves@redhat.com>
Subject: Re: [PATCH][gdb/testsuite] Rewrite catch-follow-exec.exp
Date: Thu, 11 Oct 2018 07:47:00 -0000 [thread overview]
Message-ID: <20181011074744.GA7677@delia> (raw)
In-Reply-To: <20181010134423.GA23926@blade.nx>
On Wed, Oct 10, 2018 at 02:44:24PM +0100, Gary Benson wrote:
> Simon Marchi wrote:
> > On 2018-10-10 05:27, Gary Benson wrote:
> > > Tom de Vries wrote:
> > > > On 10/9/18 3:51 PM, Gary Benson wrote:
> > > > > Tom de Vries wrote:
> > > > > > append FLAGS " \"$binfile\""
> > > > > > append FLAGS " -batch"
> > > > > > + append FLAGS " -ex \"target native\""
> > > > > > append FLAGS " -ex \"catch exec\""
> > > > > > append FLAGS " -ex \"set follow-exec-mode new\""
> > > > >
> > > > > I'm a little confused with this part, doesn't this force the
> > > > > test to run on the host?
> > > >
> > > > The "target native" was an attempt to fix problems when running
> > > > with --target_board=native-gdbserver. Perhaps it's better to
> > > > bail out in that case, but I haven't yet figured out how to. Any
> > > > advice here?
> > >
> > > Tests that can't run remote usually bail with something like this
> > > at the start:
> > >
> > > if ![isnative] then {
> > > return
> > > }
> >
> > I have not looked at the test (I can do it latter today if
> > necessary), but this comment caught my attention. isnative is
> > likely not what you want to use, make sure to read the "Local vs
> > Remote vs Native" section of the gdb/testsuite/README file.
>
> Oh! Ok, so [target_info gdb_protocol] != ""] maybe?
Attached patch uses this this.
OK for trunk?
Thanks,
- Tom
[gdb/testsuite] Rewrite catch-follow-exec.exp
There are two problems with the current catch-follow-exec.exp:
- INTERNAL_GDBFLAGS (containing the datadir setting) is not used
- remote host testing doesn't work
Fix the former by using gdb_spawn_with_cmdline_opts. Fix the latter by
requiring gdb-native.
Build on x86_64-linux with and without ubsan, tested with and without
--target_board=native-gdbserver.
2018-10-05 Tom de Vries <tdevries@suse.de>
PR gdb/23730
* gdb.base/catch-follow-exec.c: Add copyright notice.
* gdb.base/catch-follow-exec.exp: Rewrite to use
gdb_spawn_with_cmdline_opts. Require gdb-native.
---
gdb/testsuite/gdb.base/catch-follow-exec.c | 17 ++++++++++++
gdb/testsuite/gdb.base/catch-follow-exec.exp | 41 ++++++++++++++++++++++------
2 files changed, 49 insertions(+), 9 deletions(-)
diff --git a/gdb/testsuite/gdb.base/catch-follow-exec.c b/gdb/testsuite/gdb.base/catch-follow-exec.c
index fa68a2a34e..1a59f58aa5 100644
--- a/gdb/testsuite/gdb.base/catch-follow-exec.c
+++ b/gdb/testsuite/gdb.base/catch-follow-exec.c
@@ -1,3 +1,20 @@
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2018 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
#include <stdio.h>
#include <string.h>
#include <unistd.h>
diff --git a/gdb/testsuite/gdb.base/catch-follow-exec.exp b/gdb/testsuite/gdb.base/catch-follow-exec.exp
index 0e32ed4a6f..2ccd0115e7 100644
--- a/gdb/testsuite/gdb.base/catch-follow-exec.exp
+++ b/gdb/testsuite/gdb.base/catch-follow-exec.exp
@@ -22,8 +22,8 @@ if {[build_executable "failed to prepare" $testfile $srcfile debug] == -1} {
return -1
}
-if { ![remote_file target exists /bin/bash] } {
- unsupported "no bash"
+if { [target_info gdb_protocol] != "" } {
+ unsupported "not native"
return
}
@@ -34,7 +34,7 @@ if { ![remote_file target exists /bin/ls] } {
proc catch_follow_exec { } {
global binfile
- global GDB
+ global gdb_spawn_id
set test "catch-follow-exec"
@@ -45,13 +45,36 @@ proc catch_follow_exec { } {
append FLAGS " -ex \"run\""
append FLAGS " -ex \"info prog\""
- catch {exec /bin/bash -c "$GDB $FLAGS"} catchlog
- send_log "$catchlog\n"
+ gdb_exit
+ if {[gdb_spawn_with_cmdline_opts "$FLAGS"] != 0} {
+ fail "spawn"
+ return
+ }
+
+ gdb_test_multiple "" "run til exit" {
+ "runtime error:" {
+ # Error in case of --enable-ubsan
+ fail "No runtime error"
+ }
+ eof {
+ set result [wait -i $gdb_spawn_id]
+ verbose $result
+
+ gdb_assert { [lindex $result 2] == 0 }
+
+ # We suspect this will be zero instead of one after fixing PR23368
+ # - "gdb goes to into background when hitting exec catchpoint with
+ # follow-exec-mode new"
+ gdb_assert { [lindex $result 3] == 1 }
+
+ # Error in case of --disable-ubsan, we get
+ # "CHILDKILLED SIGSEGV {segmentation violation}" as extra
+ # argument(s).
+ gdb_assert { [llength $result] == 4 }
+ }
- if { [regexp {No selected thread} $catchlog] } {
- pass $test
- } else {
- fail $test
+ remote_close host
+ clear_gdb_spawn_id
}
}
next prev parent reply other threads:[~2018-10-11 7:47 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-05 10:11 Tom de Vries
2018-10-09 13:52 ` Gary Benson
2018-10-09 16:40 ` Tom de Vries
2018-10-10 9:28 ` Gary Benson
2018-10-10 13:29 ` Simon Marchi
2018-10-10 13:44 ` Gary Benson
2018-10-11 7:47 ` Tom de Vries [this message]
2018-10-11 8:33 ` Gary Benson
2018-10-13 22:18 ` Simon Marchi
2018-10-15 19:54 ` Tom de Vries
2018-10-15 22:12 ` Simon Marchi
2018-10-23 21:04 ` Simon Marchi
2018-10-23 21:05 ` Tom de Vries
2018-10-23 22:38 ` Tom de Vries
2018-10-23 23:37 ` Simon Marchi
2018-10-24 11:47 ` Tom de Vries
2018-10-24 12:09 ` [PATCH][gdb/testsuite] Log wait status on process no longer exists error Tom de Vries
2018-10-24 14:05 ` Simon Marchi
2018-12-05 19:35 ` Pedro Franco de Carvalho
2018-10-15 22:12 ` [PATCH][gdb/testsuite] Rewrite catch-follow-exec.exp Simon Marchi
2018-10-16 16:11 ` Tom de Vries
2018-10-16 17:07 ` Tom de Vries
2018-10-16 20:12 ` Simon Marchi
2018-10-17 7:30 ` Upper case test names Tom de Vries
2018-10-17 12:07 ` Simon Marchi
2018-10-18 12:56 ` Tom de Vries
2018-10-18 13:05 ` Simon Marchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181011074744.GA7677@delia \
--to=tdevries@suse.de \
--cc=gbenson@redhat.com \
--cc=gdb-patches@sourceware.org \
--cc=palves@redhat.com \
--cc=simon.marchi@polymtl.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).