From: Simon Marchi <simon.marchi@polymtl.ca>
To: gdb-patches@sourceware.org
Cc: Simon Marchi <simon.marchi@polymtl.ca>
Subject: [PATCH 2/2] Fix indentation in jit.c
Date: Wed, 11 Dec 2019 06:38:00 -0000 [thread overview]
Message-ID: <20191211063732.1043487-2-simon.marchi@polymtl.ca> (raw)
In-Reply-To: <20191211063732.1043487-1-simon.marchi@polymtl.ca>
Many places in this file use spaces only for indentation. Fix them to
conform to GNU style.
gdb/ChangeLog:
* jit.c: Fix indentation, replace spaces with tabs where
applicable.
---
gdb/jit.c | 112 +++++++++++++++++++++++++++---------------------------
1 file changed, 56 insertions(+), 56 deletions(-)
diff --git a/gdb/jit.c b/gdb/jit.c
index b6e51e4f8b4d..67bf41ff5444 100644
--- a/gdb/jit.c
+++ b/gdb/jit.c
@@ -100,7 +100,7 @@ mem_bfd_iovec_close (struct bfd *abfd, void *stream)
static file_ptr
mem_bfd_iovec_pread (struct bfd *abfd, void *stream, void *buf,
- file_ptr nbytes, file_ptr offset)
+ file_ptr nbytes, file_ptr offset)
{
int err;
struct target_buffer *buffer = (struct target_buffer *) stream;
@@ -185,13 +185,13 @@ jit_reader_load (const char *file_name)
if (jit_debug)
fprintf_unfiltered (gdb_stdlog, _("Opening shared object %s.\n"),
- file_name);
+ file_name);
gdb_dlhandle_up so = gdb_dlopen (file_name);
init_fn = (reader_init_fn_type *) gdb_dlsym (so, reader_init_fn_sym);
if (!init_fn)
error (_("Could not locate initialization function: %s."),
- reader_init_fn_sym);
+ reader_init_fn_sym);
if (gdb_dlsym (so, "plugin_is_GPL_compatible") == NULL)
error (_("Reader not GPL compatible."));
@@ -509,8 +509,8 @@ jit_object_open_impl (struct gdb_symbol_callbacks *cb)
static struct gdb_symtab *
jit_symtab_open_impl (struct gdb_symbol_callbacks *cb,
- struct gdb_object *object,
- const char *file_name)
+ struct gdb_object *object,
+ const char *file_name)
{
struct gdb_symtab *ret;
@@ -528,7 +528,7 @@ jit_symtab_open_impl (struct gdb_symbol_callbacks *cb,
static int
compare_block (const struct gdb_block *const old,
- const struct gdb_block *const newobj)
+ const struct gdb_block *const newobj)
{
if (old == NULL)
return 1;
@@ -537,9 +537,9 @@ compare_block (const struct gdb_block *const old,
else if (old->begin == newobj->begin)
{
if (old->end > newobj->end)
- return 1;
+ return 1;
else
- return 0;
+ return 0;
}
else
return 0;
@@ -551,8 +551,8 @@ compare_block (const struct gdb_block *const old,
static struct gdb_block *
jit_block_open_impl (struct gdb_symbol_callbacks *cb,
- struct gdb_symtab *symtab, struct gdb_block *parent,
- GDB_CORE_ADDR begin, GDB_CORE_ADDR end, const char *name)
+ struct gdb_symtab *symtab, struct gdb_block *parent,
+ GDB_CORE_ADDR begin, GDB_CORE_ADDR end, const char *name)
{
struct gdb_block *block = XCNEW (struct gdb_block);
@@ -573,16 +573,16 @@ jit_block_open_impl (struct gdb_symbol_callbacks *cb,
struct gdb_block *i = symtab->blocks;
for (;; i = i->next)
- {
- /* Guaranteed to terminate, since compare_block (NULL, _)
- returns 1. */
- if (compare_block (i->next, block))
- {
- block->next = i->next;
- i->next = block;
- break;
- }
- }
+ {
+ /* Guaranteed to terminate, since compare_block (NULL, _)
+ returns 1. */
+ if (compare_block (i->next, block))
+ {
+ block->next = i->next;
+ i->next = block;
+ break;
+ }
+ }
}
symtab->nblocks++;
@@ -594,8 +594,8 @@ jit_block_open_impl (struct gdb_symbol_callbacks *cb,
static void
jit_symtab_line_mapping_add_impl (struct gdb_symbol_callbacks *cb,
- struct gdb_symtab *stab, int nlines,
- struct gdb_line_mapping *map)
+ struct gdb_symtab *stab, int nlines,
+ struct gdb_line_mapping *map)
{
int i;
int alloc_len;
@@ -619,7 +619,7 @@ jit_symtab_line_mapping_add_impl (struct gdb_symbol_callbacks *cb,
static void
jit_symtab_close_impl (struct gdb_symbol_callbacks *cb,
- struct gdb_symtab *stab)
+ struct gdb_symtab *stab)
{
/* Right now nothing needs to be done here. We may need to do some
cleanup here in the future (again, without breaking the plugin
@@ -661,7 +661,7 @@ finalize_symtab (struct gdb_symtab *stab, struct objfile *objfile)
}
blockvector_size = (sizeof (struct blockvector)
- + (actual_nblocks - 1) * sizeof (struct block *));
+ + (actual_nblocks - 1) * sizeof (struct block *));
bv = (struct blockvector *) obstack_alloc (&objfile->objfile_obstack,
blockvector_size);
COMPUNIT_BLOCKVECTOR (cust) = bv;
@@ -707,9 +707,9 @@ finalize_symtab (struct gdb_symtab *stab, struct objfile *objfile)
BLOCKVECTOR_BLOCK (bv, i) = new_block;
if (begin > BLOCK_START (new_block))
- begin = BLOCK_START (new_block);
+ begin = BLOCK_START (new_block);
if (end < BLOCK_END (new_block))
- end = BLOCK_END (new_block);
+ end = BLOCK_END (new_block);
gdb_block_iter->real_block = new_block;
}
@@ -778,7 +778,7 @@ finalize_symtab (struct gdb_symtab *stab, struct objfile *objfile)
static void
jit_object_close_impl (struct gdb_symbol_callbacks *cb,
- struct gdb_object *obj)
+ struct gdb_object *obj)
{
struct gdb_symtab *i, *j;
struct objfile *objfile;
@@ -806,7 +806,7 @@ jit_object_close_impl (struct gdb_symbol_callbacks *cb,
static int
jit_reader_try_read_symtab (struct jit_code_entry *code_entry,
- CORE_ADDR entry_addr)
+ CORE_ADDR entry_addr)
{
int status;
jit_dbg_reader_data priv_data;
@@ -849,13 +849,13 @@ jit_reader_try_read_symtab (struct jit_code_entry *code_entry,
funcs = loaded_jit_reader->functions;
if (funcs->read (funcs, &callbacks, gdb_mem.data (),
code_entry->symfile_size)
- != GDB_SUCCESS)
- status = 0;
+ != GDB_SUCCESS)
+ status = 0;
}
if (jit_debug && status == 0)
fprintf_unfiltered (gdb_stdlog,
- "Could not read symtab using the loaded JIT reader.\n");
+ "Could not read symtab using the loaded JIT reader.\n");
return status;
}
@@ -864,8 +864,8 @@ jit_reader_try_read_symtab (struct jit_code_entry *code_entry,
static void
jit_bfd_try_read_symtab (struct jit_code_entry *code_entry,
- CORE_ADDR entry_addr,
- struct gdbarch *gdbarch)
+ CORE_ADDR entry_addr,
+ struct gdbarch *gdbarch)
{
struct bfd_section *sec;
struct objfile *objfile;
@@ -900,7 +900,7 @@ JITed symbol file is not an object file, ignoring it.\n"));
b = gdbarch_bfd_arch_info (gdbarch);
if (b->compatible (b, bfd_get_arch_info (nbfd.get ())) != b)
warning (_("JITed object file architecture %s is not compatible "
- "with target architecture %s."),
+ "with target architecture %s."),
bfd_get_arch_info (nbfd.get ())->printable_name,
b->printable_name);
@@ -911,8 +911,8 @@ JITed symbol file is not an object file, ignoring it.\n"));
for (sec = nbfd->sections; sec != NULL; sec = sec->next)
if ((bfd_section_flags (sec) & (SEC_ALLOC|SEC_LOAD)) != 0)
{
- /* We assume that these virtual addresses are absolute, and do not
- treat them as offsets. */
+ /* We assume that these virtual addresses are absolute, and do not
+ treat them as offsets. */
sai.emplace_back (bfd_section_vma (sec),
bfd_section_name (sec),
sec->index);
@@ -934,16 +934,16 @@ JITed symbol file is not an object file, ignoring it.\n"));
static void
jit_register_code (struct gdbarch *gdbarch,
- CORE_ADDR entry_addr, struct jit_code_entry *code_entry)
+ CORE_ADDR entry_addr, struct jit_code_entry *code_entry)
{
int success;
if (jit_debug)
fprintf_unfiltered (gdb_stdlog,
- "jit_register_code, symfile_addr = %s, "
- "symfile_size = %s\n",
- paddress (gdbarch, code_entry->symfile_addr),
- pulongest (code_entry->symfile_size));
+ "jit_register_code, symfile_addr = %s, "
+ "symfile_size = %s\n",
+ paddress (gdbarch, code_entry->symfile_addr),
+ pulongest (code_entry->symfile_size));
success = jit_reader_try_read_symtab (code_entry, entry_addr);
@@ -975,7 +975,7 @@ jit_find_objf_with_entry_addr (CORE_ADDR entry_addr)
objf_data
= (struct jit_objfile_data *) objfile_data (objf, jit_objfile_data);
if (objf_data != NULL && objf_data->addr == entry_addr)
- return objf;
+ return objf;
}
return NULL;
}
@@ -1079,7 +1079,7 @@ struct jit_unwind_private
static void
jit_unwind_reg_set_impl (struct gdb_unwind_callbacks *cb, int dwarf_regnum,
- struct gdb_reg_value *value)
+ struct gdb_reg_value *value)
{
struct jit_unwind_private *priv;
int gdb_reg;
@@ -1087,13 +1087,13 @@ jit_unwind_reg_set_impl (struct gdb_unwind_callbacks *cb, int dwarf_regnum,
priv = (struct jit_unwind_private *) cb->priv_data;
gdb_reg = gdbarch_dwarf2_reg_to_regnum (get_frame_arch (priv->this_frame),
- dwarf_regnum);
+ dwarf_regnum);
if (gdb_reg == -1)
{
if (jit_debug)
- fprintf_unfiltered (gdb_stdlog,
- _("Could not recognize DWARF regnum %d"),
- dwarf_regnum);
+ fprintf_unfiltered (gdb_stdlog,
+ _("Could not recognize DWARF regnum %d"),
+ dwarf_regnum);
value->free (value);
return;
}
@@ -1155,7 +1155,7 @@ jit_dealloc_cache (struct frame_info *this_frame, void *cache)
static int
jit_frame_sniffer (const struct frame_unwind *self,
- struct frame_info *this_frame, void **cache)
+ struct frame_info *this_frame, void **cache)
{
struct jit_unwind_private *priv_data;
struct gdb_unwind_callbacks callbacks;
@@ -1185,13 +1185,13 @@ jit_frame_sniffer (const struct frame_unwind *self,
if (funcs->unwind (funcs, &callbacks) == GDB_SUCCESS)
{
if (jit_debug)
- fprintf_unfiltered (gdb_stdlog, _("Successfully unwound frame using "
- "JIT reader.\n"));
+ fprintf_unfiltered (gdb_stdlog, _("Successfully unwound frame using "
+ "JIT reader.\n"));
return 1;
}
if (jit_debug)
fprintf_unfiltered (gdb_stdlog, _("Could not unwind frame using "
- "JIT reader.\n"));
+ "JIT reader.\n"));
jit_dealloc_cache (this_frame, *cache);
*cache = NULL;
@@ -1205,7 +1205,7 @@ jit_frame_sniffer (const struct frame_unwind *self,
static void
jit_frame_this_id (struct frame_info *this_frame, void **cache,
- struct frame_id *this_id)
+ struct frame_id *this_id)
{
struct jit_unwind_private priv;
struct gdb_frame_id frame_id;
@@ -1333,9 +1333,9 @@ jit_inferior_init (struct gdbarch *gdbarch)
jit_read_code_entry (gdbarch, cur_entry_addr, &cur_entry);
/* This hook may be called many times during setup, so make sure we don't
- add the same symbol file twice. */
+ add the same symbol file twice. */
if (jit_find_objf_with_entry_addr (cur_entry_addr) != NULL)
- continue;
+ continue;
jit_register_code (gdbarch, cur_entry_addr, &cur_entry);
}
@@ -1414,7 +1414,7 @@ jit_event_handler (struct gdbarch *gdbarch)
"entry at address: %s\n"),
paddress (gdbarch, entry_addr));
else
- jit_unregister_code (objf);
+ jit_unregister_code (objf);
break;
default:
@@ -1465,7 +1465,7 @@ void
_initialize_jit (void)
{
jit_reader_dir = relocate_gdb_directory (JIT_READER_DIR,
- JIT_READER_DIR_RELOCATABLE);
+ JIT_READER_DIR_RELOCATABLE);
add_setshow_zuinteger_cmd ("jit", class_maintenance, &jit_debug,
_("Set JIT debugging."),
_("Show JIT debugging."),
--
2.24.0
next prev parent reply other threads:[~2019-12-11 6:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 6:38 [PATCH 1/2] Replace xmalloc/xfree with vector " Simon Marchi
2019-12-11 6:38 ` Simon Marchi [this message]
2019-12-12 19:01 ` [PATCH 2/2] Fix indentation " Tom Tromey
2019-12-12 19:54 ` Simon Marchi
2019-12-13 9:11 ` Strasuns, Mihails
2019-12-13 9:18 ` Eli Zaretskii
2019-12-13 14:43 ` Pedro Alves
2019-12-13 15:14 ` Simon Marchi
2019-12-12 19:00 ` [PATCH 1/2] Replace xmalloc/xfree with vector " Tom Tromey
2019-12-12 19:55 ` Simon Marchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211063732.1043487-2-simon.marchi@polymtl.ca \
--to=simon.marchi@polymtl.ca \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).