From: Tom Tromey <tom@tromey.com>
To: gdb-patches@sourceware.org
Cc: Tom Tromey <tom@tromey.com>
Subject: [PATCH v2 04/79] Use require supports_reverse
Date: Wed, 11 Jan 2023 19:59:37 -0700 [thread overview]
Message-ID: <20230112030052.3306113-5-tom@tromey.com> (raw)
In-Reply-To: <20230112030052.3306113-1-tom@tromey.com>
This changes some tests to use "require supports_reverse".
---
gdb/testsuite/gdb.mi/mi-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/amd64-tailcall-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/break-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/consecutive-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/finish-precsave.exp | 4 +---
gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp | 4 +---
gdb/testsuite/gdb.reverse/finish-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/fstatat-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/getrandom.exp | 4 +---
gdb/testsuite/gdb.reverse/getresuid-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/i386-reverse.exp | 5 +----
gdb/testsuite/gdb.reverse/i386-sse-reverse.exp | 5 +----
gdb/testsuite/gdb.reverse/insn-reverse.exp | 7 +------
gdb/testsuite/gdb.reverse/machinestate.exp | 4 +---
gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp | 4 +---
gdb/testsuite/gdb.reverse/pipe-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/readv-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/recvmsg-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/rerun-prec.exp | 4 +---
gdb/testsuite/gdb.reverse/s390-mvcle.exp | 4 +---
gdb/testsuite/gdb.reverse/sigall-precsave.exp | 5 +----
gdb/testsuite/gdb.reverse/sigall-reverse.exp | 5 +----
gdb/testsuite/gdb.reverse/singlejmp-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/solib-reverse.exp | 7 +------
gdb/testsuite/gdb.reverse/step-indirect-call-thunk.exp | 5 +----
gdb/testsuite/gdb.reverse/step-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/time-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/until-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/waitpid-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/watch-reverse.exp | 4 +---
30 files changed, 30 insertions(+), 101 deletions(-)
diff --git a/gdb/testsuite/gdb.mi/mi-reverse.exp b/gdb/testsuite/gdb.mi/mi-reverse.exp
index d631beb17c8..020b6feb448 100644
--- a/gdb/testsuite/gdb.mi/mi-reverse.exp
+++ b/gdb/testsuite/gdb.mi/mi-reverse.exp
@@ -27,9 +27,7 @@
# but to verify the correct output response to MI operations.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
load_lib mi-support.exp
set MIFLAGS "-i=mi"
diff --git a/gdb/testsuite/gdb.reverse/amd64-tailcall-reverse.exp b/gdb/testsuite/gdb.reverse/amd64-tailcall-reverse.exp
index 52a87faabf7..dd6e4d2045f 100644
--- a/gdb/testsuite/gdb.reverse/amd64-tailcall-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/amd64-tailcall-reverse.exp
@@ -13,9 +13,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
set opts {}
standard_testfile .S
diff --git a/gdb/testsuite/gdb.reverse/break-reverse.exp b/gdb/testsuite/gdb.reverse/break-reverse.exp
index 2078898f8eb..03d90cdb847 100644
--- a/gdb/testsuite/gdb.reverse/break-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/break-reverse.exp
@@ -16,9 +16,7 @@
# This file is part of the GDB testsuite. It tests reverse debugging
# with breakpoints.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/consecutive-reverse.exp b/gdb/testsuite/gdb.reverse/consecutive-reverse.exp
index 3988097bc98..74ce0811776 100644
--- a/gdb/testsuite/gdb.reverse/consecutive-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/consecutive-reverse.exp
@@ -16,9 +16,7 @@
# This file is part of the GDB testsuite. It tests stepping over
# consecutive instructions in reverse.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/finish-precsave.exp b/gdb/testsuite/gdb.reverse/finish-precsave.exp
index 159ee353f50..5d8eaad246e 100644
--- a/gdb/testsuite/gdb.reverse/finish-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/finish-precsave.exp
@@ -16,9 +16,7 @@
# This file is part of the GDB testsuite. It tests 'finish' with
# reverse debugging.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile finish-reverse.c
set precsave [standard_output_file finish.precsave]
diff --git a/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp b/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
index 290ad24ee13..2e9fc34c7c2 100644
--- a/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
+++ b/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
@@ -40,9 +40,7 @@
# addition to non-PowerPC systems. On non-PowerPC systems, the GEP and LEP
# are the same.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/finish-reverse.exp b/gdb/testsuite/gdb.reverse/finish-reverse.exp
index 01ba309420c..76ca8197d61 100644
--- a/gdb/testsuite/gdb.reverse/finish-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/finish-reverse.exp
@@ -16,9 +16,7 @@
# This file is part of the GDB testsuite. It tests 'finish' with
# reverse debugging.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/fstatat-reverse.exp b/gdb/testsuite/gdb.reverse/fstatat-reverse.exp
index dcbbed3c11c..2d1ae90a8fa 100644
--- a/gdb/testsuite/gdb.reverse/fstatat-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/fstatat-reverse.exp
@@ -19,9 +19,7 @@
# This test tests fstatat syscall for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/getrandom.exp b/gdb/testsuite/gdb.reverse/getrandom.exp
index 1507bdb06f3..ef8899358f9 100644
--- a/gdb/testsuite/gdb.reverse/getrandom.exp
+++ b/gdb/testsuite/gdb.reverse/getrandom.exp
@@ -19,9 +19,7 @@
# This test tests getrandom syscall for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/getresuid-reverse.exp b/gdb/testsuite/gdb.reverse/getresuid-reverse.exp
index 27a5fbfcc06..20306f03f48 100644
--- a/gdb/testsuite/gdb.reverse/getresuid-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/getresuid-reverse.exp
@@ -19,9 +19,7 @@
# This test tests getresuid/getresgid syscalls for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/i386-reverse.exp b/gdb/testsuite/gdb.reverse/i386-reverse.exp
index aacb362af7a..5fa7237af53 100644
--- a/gdb/testsuite/gdb.reverse/i386-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/i386-reverse.exp
@@ -19,10 +19,7 @@
# This test tests some i386 general instructions for reverse execution.
#
-if ![supports_reverse] {
- return
-}
-
+require supports_reverse
if {![is_x86_like_target]} {
verbose "Skipping i386 reverse tests."
diff --git a/gdb/testsuite/gdb.reverse/i386-sse-reverse.exp b/gdb/testsuite/gdb.reverse/i386-sse-reverse.exp
index bc8f662b969..66a69770d56 100644
--- a/gdb/testsuite/gdb.reverse/i386-sse-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/i386-sse-reverse.exp
@@ -19,10 +19,7 @@
# This test tests some i386 general instructions for reverse execution.
#
-if ![supports_reverse] {
- return
-}
-
+require supports_reverse
if {![istarget "*86*-*linux*"]} {
verbose "Skipping i386 reverse tests."
diff --git a/gdb/testsuite/gdb.reverse/insn-reverse.exp b/gdb/testsuite/gdb.reverse/insn-reverse.exp
index a7322067922..1a575b2d43e 100644
--- a/gdb/testsuite/gdb.reverse/insn-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/insn-reverse.exp
@@ -13,12 +13,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-if ![supports_reverse] {
- return
-}
-
-# Check if start command is supported.
-require !use_gdb_stub
+require supports_reverse !use_gdb_stub
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/machinestate.exp b/gdb/testsuite/gdb.reverse/machinestate.exp
index eb6f9debc4c..68412b47d3b 100644
--- a/gdb/testsuite/gdb.reverse/machinestate.exp
+++ b/gdb/testsuite/gdb.reverse/machinestate.exp
@@ -35,9 +35,7 @@
# Test forward replay
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile .c ms1.c
diff --git a/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp b/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp
index 5c0e1e2fab3..ee83c55f598 100644
--- a/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp
+++ b/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp
@@ -40,9 +40,7 @@
# addition to non-PowerPC systems. On non-PowerPC systems, the GEP and LEP
# are the same.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/pipe-reverse.exp b/gdb/testsuite/gdb.reverse/pipe-reverse.exp
index 2b59071b7b6..d03c2c89c40 100644
--- a/gdb/testsuite/gdb.reverse/pipe-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/pipe-reverse.exp
@@ -19,9 +19,7 @@
# This test tests pipe syscall for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/readv-reverse.exp b/gdb/testsuite/gdb.reverse/readv-reverse.exp
index bd79a1fa9d8..565fbb791a3 100644
--- a/gdb/testsuite/gdb.reverse/readv-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/readv-reverse.exp
@@ -19,9 +19,7 @@
# This test tests readv syscall for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/recvmsg-reverse.exp b/gdb/testsuite/gdb.reverse/recvmsg-reverse.exp
index 58130a6b541..598321faaed 100644
--- a/gdb/testsuite/gdb.reverse/recvmsg-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/recvmsg-reverse.exp
@@ -19,9 +19,7 @@
# This test tests socketpair and recvmsg syscalls for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/rerun-prec.exp b/gdb/testsuite/gdb.reverse/rerun-prec.exp
index 6d6ce8abcb4..d2fcdbd4876 100644
--- a/gdb/testsuite/gdb.reverse/rerun-prec.exp
+++ b/gdb/testsuite/gdb.reverse/rerun-prec.exp
@@ -13,9 +13,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>. */
-if {![supports_reverse] || ![supports_process_record]} {
- return
-}
+require supports_reverse supports_process_record
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/s390-mvcle.exp b/gdb/testsuite/gdb.reverse/s390-mvcle.exp
index 0d2db70a597..b0890400bae 100644
--- a/gdb/testsuite/gdb.reverse/s390-mvcle.exp
+++ b/gdb/testsuite/gdb.reverse/s390-mvcle.exp
@@ -17,9 +17,7 @@
# This test tests s390 MVCLE opcode for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
if { ! [istarget "s390*-*-*"] } {
verbose "Skipping s390 MVCLE instruction recording tests."
diff --git a/gdb/testsuite/gdb.reverse/sigall-precsave.exp b/gdb/testsuite/gdb.reverse/sigall-precsave.exp
index 9212fb01eea..df0e8228fb4 100644
--- a/gdb/testsuite/gdb.reverse/sigall-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/sigall-precsave.exp
@@ -18,10 +18,7 @@ if [target_info exists gdb,nosignals] {
return
}
-if ![supports_reverse] {
- return
-}
-
+require supports_reverse
gdb_exit
gdb_start
diff --git a/gdb/testsuite/gdb.reverse/sigall-reverse.exp b/gdb/testsuite/gdb.reverse/sigall-reverse.exp
index 487cf421402..7499d784b9b 100644
--- a/gdb/testsuite/gdb.reverse/sigall-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/sigall-reverse.exp
@@ -18,10 +18,7 @@ if [target_info exists gdb,nosignals] {
return
}
-if ![supports_reverse] {
- return
-}
-
+require supports_reverse
gdb_exit
gdb_start
diff --git a/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp b/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp
index 1ca7c2ce559..bc7e6876bd2 100644
--- a/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp
@@ -13,9 +13,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile ".S" "${gdb_test_file_name}-nodebug.S"
set executable ${testfile}
diff --git a/gdb/testsuite/gdb.reverse/solib-reverse.exp b/gdb/testsuite/gdb.reverse/solib-reverse.exp
index 3cefa6c6925..b562ac9fa12 100644
--- a/gdb/testsuite/gdb.reverse/solib-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/solib-reverse.exp
@@ -16,12 +16,7 @@
# This file is part of the GDB testsuite. It tests reverse debugging
# with shared libraries.
-if ![supports_reverse] {
- return
-}
-if {[skip_shlib_tests]} {
- return
-}
+require supports_reverse !skip_shlib_tests
standard_testfile
set lib1file "shr1"
diff --git a/gdb/testsuite/gdb.reverse/step-indirect-call-thunk.exp b/gdb/testsuite/gdb.reverse/step-indirect-call-thunk.exp
index ad637899e5b..94292d5eb9b 100644
--- a/gdb/testsuite/gdb.reverse/step-indirect-call-thunk.exp
+++ b/gdb/testsuite/gdb.reverse/step-indirect-call-thunk.exp
@@ -13,10 +13,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-if { ![supports_reverse] } {
- untested "target does not support record"
- return -1
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/step-reverse.exp b/gdb/testsuite/gdb.reverse/step-reverse.exp
index 27e4b175274..2c3b95a2eae 100644
--- a/gdb/testsuite/gdb.reverse/step-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/step-reverse.exp
@@ -20,9 +20,7 @@
# Test step and next in reverse
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/time-reverse.exp b/gdb/testsuite/gdb.reverse/time-reverse.exp
index 73648af992b..07d55b348e8 100644
--- a/gdb/testsuite/gdb.reverse/time-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/time-reverse.exp
@@ -19,9 +19,7 @@
# This test tests time syscall for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/until-reverse.exp b/gdb/testsuite/gdb.reverse/until-reverse.exp
index 23fc881dbf2..c9d0c7ec7ad 100644
--- a/gdb/testsuite/gdb.reverse/until-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/until-reverse.exp
@@ -16,9 +16,7 @@
# This file is part of the GDB testsuite. It tests 'until' and
# 'advance' in reverse debugging.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile .c ur1.c
diff --git a/gdb/testsuite/gdb.reverse/waitpid-reverse.exp b/gdb/testsuite/gdb.reverse/waitpid-reverse.exp
index eb7e90015a2..9c9b9d44a2e 100644
--- a/gdb/testsuite/gdb.reverse/waitpid-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/waitpid-reverse.exp
@@ -21,9 +21,7 @@
# Also serves as regression test for gdb/19187 (recording across a
# fork).
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/watch-reverse.exp b/gdb/testsuite/gdb.reverse/watch-reverse.exp
index c4144c12e5d..6b81a6fdf88 100644
--- a/gdb/testsuite/gdb.reverse/watch-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/watch-reverse.exp
@@ -18,9 +18,7 @@
# with watchpoints.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
--
2.39.0
next prev parent reply other threads:[~2023-01-12 3:01 UTC|newest]
Thread overview: 91+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-12 2:59 [PATCH v2 00/79] Rewrite "require" test procedure and use it more often Tom Tromey
2023-01-12 2:59 ` [PATCH v2 01/79] Don't use ensure_gdb_index with require Tom Tromey
2023-01-12 2:59 ` [PATCH v2 02/79] Change 'require' to accept a list of predicates Tom Tromey
2023-01-12 2:59 ` [PATCH v2 03/79] Use unsupported in 'require' Tom Tromey
2023-01-12 2:59 ` Tom Tromey [this message]
2023-01-12 2:59 ` [PATCH v2 05/79] Use require supports_process_record Tom Tromey
2023-01-12 2:59 ` [PATCH v2 06/79] Use require dwarf2_support Tom Tromey
2023-01-12 2:59 ` [PATCH v2 07/79] Use require is_x86_like_target Tom Tromey
2023-01-12 2:59 ` [PATCH v2 08/79] Use require skip_cplus_tests Tom Tromey
2023-01-12 3:56 ` Kevin Buettner
2023-01-12 2:59 ` [PATCH v2 09/79] Use require skip_shlib_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 10/79] Use require skip_dlmopen_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 11/79] Use require skip_stl_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 12/79] Use require skip_rust_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 13/79] Use require skip_fortran_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 14/79] Use require skip_ada_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 15/79] Use require skip_go_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 16/79] Use require skip_d_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 17/79] Use require skip_ctf_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 18/79] Use require skip_hw_watchpoint_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 19/79] Use require skip_ifunc_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 20/79] Use require skip_aarch64_sve_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 21/79] Use require skip_btrace_pt_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 22/79] Use require skip_btrace_tests Tom Tromey
2023-01-12 2:59 ` [PATCH v2 23/79] Use require skip_avx_* Tom Tromey
2023-01-12 2:59 ` [PATCH v2 24/79] Use require support_displaced_stepping Tom Tromey
2023-01-12 2:59 ` [PATCH v2 25/79] Use require is_aarch64_target Tom Tromey
2023-01-12 2:59 ` [PATCH v2 26/79] Use require is_aarch32_target Tom Tromey
2023-01-12 3:00 ` [PATCH v2 27/79] Use require is_amd64_regs_target Tom Tromey
2023-01-12 3:00 ` [PATCH v2 28/79] Use require is_elf_target Tom Tromey
2023-01-12 3:00 ` [PATCH v2 29/79] Use require can_single_step_to_signal_handler Tom Tromey
2023-01-12 3:00 ` [PATCH v2 30/79] Use require supports_get_siginfo_type Tom Tromey
2023-01-12 3:00 ` [PATCH v2 31/79] Use require support_go_compile Tom Tromey
2023-01-12 3:00 ` [PATCH v2 32/79] Use require use_gdb_stub Tom Tromey
2023-01-12 3:00 ` [PATCH v2 33/79] Use require can_spawn_for_attach Tom Tromey
2023-01-12 3:00 ` [PATCH v2 34/79] Use require isnative Tom Tromey
2023-01-12 3:00 ` [PATCH v2 35/79] Use require skip_gdbserver_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 36/79] Use require skip_shlib_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 37/79] Use require is_c_compiler_gcc Tom Tromey
2023-01-12 3:00 ` [PATCH v2 38/79] Use require gdb_debug_enabled Tom Tromey
2023-01-12 3:00 ` [PATCH v2 39/79] Use require gdb_skip_xml_test Tom Tromey
2023-01-12 3:00 ` [PATCH v2 40/79] Use require gdb_trace_common_supports_arch Tom Tromey
2023-01-12 3:00 ` [PATCH v2 41/79] Use require skip_perf_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 42/79] Use require skip_opencl_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 43/79] Use require target_can_use_run_cmd Tom Tromey
2023-01-12 3:00 ` [PATCH v2 44/79] Use require using_fission Tom Tromey
2023-01-12 3:00 ` [PATCH v2 45/79] Use require skip_debuginfod_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 46/79] Use require gnat_runtime_has_debug_info Tom Tromey
2023-01-12 3:00 ` [PATCH v2 47/79] Rewrite skip_python_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 48/79] Remove mi_skip_python_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 49/79] Fix latent bug in default_prompt_gdb_start Tom Tromey
2023-01-12 3:00 ` [PATCH v2 50/79] Use "require" for Python tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 51/79] Rename to allow_xml_test Tom Tromey
2023-01-12 3:00 ` [PATCH v2 52/79] Rename to allow_aarch64_sve_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 53/79] Rename to allow_ada_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 54/79] Rename to allow_avx512bf16_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 55/79] Rename to allow_avx512fp16_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 56/79] Rename to allow_btrace_pt_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 57/79] Rename to allow_btrace_tests Tom Tromey
2023-01-12 6:39 ` Metzger, Markus T
2023-01-12 3:00 ` [PATCH v2 58/79] Rename to allow_cplus_tests and allow_stl_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 59/79] Rename to allow_ctf_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 60/79] Rename to allow_debuginfod_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 61/79] Rename to allow_dlmopen_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 62/79] Rename to allow_d_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 63/79] Rename to allow_fortran_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 64/79] Rename to allow_gdbserver_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 65/79] Rename to allow_go_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 66/79] Rename to allow_hw_watchpoint_access_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 67/79] Rename to allow_hw_watchpoint_multi_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 68/79] Rename to allow_hw_watchpoint_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 69/79] Rename to allow_ifunc_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 70/79] Rename to allow_opencl_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 71/79] Rename to allow_perf_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 72/79] Rename to allow_python_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 73/79] Rename to allow_rust_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 74/79] Rename to allow_shlib_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 75/79] Rename to allow_tsx_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 76/79] Rename to allow_hw_breakpoint_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 77/79] Rename to allow_guile_tests Tom Tromey
2023-01-14 16:22 ` Tom de Vries
2023-01-14 19:50 ` Tom Tromey
2023-01-12 3:00 ` [PATCH v2 78/79] Rename to allow_tui_tests Tom Tromey
2023-01-12 3:00 ` [PATCH v2 79/79] Consolidate calls to require Tom Tromey
2023-01-13 12:48 ` Pedro Alves
2023-01-13 14:07 ` Tom Tromey
2023-01-13 14:45 ` Pedro Alves
2023-01-13 19:13 ` Tom Tromey
2023-01-12 4:45 ` [PATCH v2 00/79] Rewrite "require" test procedure and use it more often Kevin Buettner
2023-01-13 3:51 ` Tom Tromey
2023-01-13 20:18 ` Tom Tromey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230112030052.3306113-5-tom@tromey.com \
--to=tom@tromey.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).