From: Luis Machado <luis.machado@arm.com>
To: Christophe Lyon <christophe.lyon@linaro.org>, gdb-patches@sourceware.org
Subject: Re: [PATCH v2] gdb, gdbserver: Add missing install-dvi Makefile target
Date: Wed, 10 Apr 2024 00:00:42 +0100 [thread overview]
Message-ID: <50664a13-d38a-42f8-9fa7-19824afb64a4@arm.com> (raw)
In-Reply-To: <20240407191027.118770-1-christophe.lyon@linaro.org>
On 4/7/24 20:10, Christophe Lyon wrote:
> For some reason install-dvi is missing although other targets of the
> same family are present. This looks like an oversight.
>
> This enables calling 'make install-dvi' from the top-level build
> directory.
>
> Fix what looks like another oversight: include 'pdf' in 'all-doc' in
> gdb/doc/Makefile.in.
> ---
> gdb/Makefile.in | 2 +-
> gdb/data-directory/Makefile.in | 2 +-
> gdb/doc/Makefile.in | 19 +++++++++++++++++--
> gdb/testsuite/Makefile.in | 1 +
> gdbserver/Makefile.in | 1 +
> 5 files changed, 21 insertions(+), 4 deletions(-)
>
> diff --git a/gdb/Makefile.in b/gdb/Makefile.in
> index 40732cb2227..d001359539a 100644
> --- a/gdb/Makefile.in
> +++ b/gdb/Makefile.in
> @@ -2035,7 +2035,7 @@ check-headers:
> done
> .PHONY: check-headers
>
> -info install-info clean-info dvi pdf install-pdf html install-html: force
> +info install-info clean-info dvi install-dvi pdf install-pdf html install-html: force
> @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
>
> # Traditionally "install" depends on "all". But it may be useful
> diff --git a/gdb/data-directory/Makefile.in b/gdb/data-directory/Makefile.in
> index 2a40be4ade0..2db8706eba6 100644
> --- a/gdb/data-directory/Makefile.in
> +++ b/gdb/data-directory/Makefile.in
> @@ -422,7 +422,7 @@ maintainer-clean realclean distclean: clean
> .PHONY: install-info install-pdf install-html clean-info
> check installcheck:
> info dvi pdf html:
> -install-info install-pdf install-html:
> +install-info install-dvi install-pdf install-html:
> clean-info:
>
> # GNU Make has an annoying habit of putting *all* the Makefile variables
> diff --git a/gdb/doc/Makefile.in b/gdb/doc/Makefile.in
> index 04f9dbd27f0..8007f6373d4 100644
> --- a/gdb/doc/Makefile.in
> +++ b/gdb/doc/Makefile.in
> @@ -24,6 +24,7 @@ prefix = @prefix@
> infodir = @infodir@
> datarootdir = @datarootdir@
> docdir = @docdir@
> +dvidir = @dvidir@
> pdfdir = @pdfdir@
> htmldir = @htmldir@
> mandir = @mandir@
> @@ -87,6 +88,8 @@ SET_TEXINPUTS = \
> # Files which should be generated via 'info' and installed by 'install-info'
> INFO_DEPS = gdb.info stabs.info annotate.info
>
> +# Files which should be generated via 'dvi' and installed by 'install-dvi'
> +DVIFILES = gdb.dvi stabs.dvi refcard.dvi annotate.dvi
> # Files which should be generated via 'pdf' and installed by 'install-pdf'
> PDFFILES = gdb.pdf stabs.pdf refcard.pdf annotate.pdf
> # Files which should be generated via 'html' and installed by 'install-html'
> @@ -191,7 +194,7 @@ HAVE_NATIVE_GCORE_HOST = @HAVE_NATIVE_GCORE_HOST@
> all: info
>
> info: $(INFO_DEPS)
> -dvi: gdb.dvi stabs.dvi refcard.dvi annotate.dvi
> +dvi: $(DVIFILES)
> ps: gdb.ps stabs.ps refcard.ps annotate.ps
> html: $(HTMLFILES)
> pdf: $(PDFFILES)
> @@ -233,7 +236,7 @@ Doxyfile-gdb-xref: $(srcdir)/Doxyfile-gdb-xref.in
> Doxyfile-gdbserver: $(srcdir)/Doxyfile-gdbserver.in
> $(doxyedit) $(srcdir)/Doxyfile-gdbserver.in >Doxyfile-gdbserver
>
> -all-doc: info dvi ps # pdf
> +all-doc: info dvi ps pdf
> diststuff: info man
> rm -f gdb-cfg.texi
>
> @@ -293,6 +296,18 @@ install-html: $(HTMLFILES)
> fi; \
> done
>
> +dvi__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
> +
> +install-dvi: $(DVIFILES)
> + @$(NORMAL_INSTALL)
> + test -z "$(dvidir)" || $(mkinstalldirs) "$(DESTDIR)$(dvidir)"
> + @list='$(DVIFILES)'; for p in $$list; do \
> + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> + f=$(dvi__strip_dir) \
> + echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \
> + $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \
> + done
> +
> pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
>
> install-pdf: $(PDFFILES)
> diff --git a/gdb/testsuite/Makefile.in b/gdb/testsuite/Makefile.in
> index f6603daf7fd..f799f16c2bb 100644
> --- a/gdb/testsuite/Makefile.in
> +++ b/gdb/testsuite/Makefile.in
> @@ -105,6 +105,7 @@ INFODIRS=doc
> info:
> install-info:
> dvi:
> +install-dvi:
> pdf:
> install-pdf:
> html:
> diff --git a/gdbserver/Makefile.in b/gdbserver/Makefile.in
> index d12f8746611..4eed8926f48 100644
> --- a/gdbserver/Makefile.in
> +++ b/gdbserver/Makefile.in
> @@ -342,6 +342,7 @@ installcheck:
> check:
> info dvi pdf:
> install-info:
> +install-dvi:
> install-pdf:
> html:
> install-html:
I gave this a try and install-dvi almost fully works from the top level, though it still fails for gprofng.
Maybe something for the binutils folks? Otherwise this part looks OK to me.
next prev parent reply other threads:[~2024-04-09 23:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-04 21:59 [PATCH] gdb: " Christophe Lyon
2024-04-06 4:13 ` Thiago Jung Bauermann
2024-04-07 19:08 ` Christophe Lyon
2024-04-07 19:10 ` [PATCH v2] gdb, gdbserver: " Christophe Lyon
2024-04-09 23:00 ` Luis Machado [this message]
2024-04-10 8:10 ` Christophe Lyon
2024-04-10 10:02 ` Christophe Lyon
2024-04-10 13:00 ` Luis Machado
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50664a13-d38a-42f8-9fa7-19824afb64a4@arm.com \
--to=luis.machado@arm.com \
--cc=christophe.lyon@linaro.org \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).