From: Adrian Sendroiu <adrian.sendroiu@freescale.com>
To: Pedro Alves <palves@redhat.com>, <tromey@redhat.com>,
<gdb-patches@sourceware.org>
Subject: Re: [PATCH v2 2/2] mi-out: Implement mi redirection using a stack.
Date: Tue, 05 Aug 2014 13:54:00 -0000 [thread overview]
Message-ID: <53E0E251.7040803@freescale.com> (raw)
In-Reply-To: <53DA6D73.5050906@redhat.com>
> It's better to use $bpnum instead of hardcoding 2, as otherwise if someone adds a
> test that adds another breakpoint before this, this test stops being
> effective, silently.
done
>> + mi_gdb_test "-exec-continue" ".*"
>
> This should use mi_send_resuming_command/mi_expect_stop
> or mi_execute_to, so that the test works when the whole MI
> testsuite is run in async mode.
done. Although I ran into another problem here, because mi_expect_stop expects a
message that looks like *stopped + prompt, while in my case it was something like
*stopped + =breakpoint-modified + prompt. I solved this by doing an even simpler
test case: just executing two python commands nested inside one another, like
"python gdb.execute('python gdb.execute(...".
> I think that we can avoid this duplication by renaming
> skip_python_tests, adding it a prompt_re parameter, and
> using that instead of $gdb_prompt. Something like:
>
> proc skip_python_tests {} {
> skip_python_tests_prompt "$gdb_prompt $"
> }
>
> proc mi_skip_python_tests {
> skip_python_tests_prompt "$mi_gdb_prompt$"
> }
>
> Did you try that?
done
--- 8< ---
Subject: [PATCH] mi-out: Implement mi redirection using a stack.
The current implementation doesn't support nested redirections because it only
has an "original_buffer" where it saves the current stream when a redirection is
done. To overcome this limitation, this patch reimplements it using a stack of
streams.
gdb/
2014-07-23 Adrian Sendroiu <adrian.sendroiu@freescale.com>
* mi/mi-out.c (ui_filep): New typedef.
(DEF_VEC_P (ui_filep)): New type.
(struct ui_out_data): <buffer> Remove field.
<original_buffer> Remove field.
<streams>: New field.
(mi_field_string): Get the output stream from the top of the
stack of streams.
(mi_field_fmt): Likewise.
(mi_flush): Likewise.
(field_separator): Likewise.
(mi_open): Likewise.
(mi_close): Likewise.
(mi_out_buffered): Likewise.
(mi_out_rewind): Likewise.
(mi_out_put): Likewise.
(mi_out_new): Initialize the stack of streams. Push a newly
created stream on the stack. Remove obsolete comment.
(mi_redirect): Reimplement using push and pop operations.
gdb/testsuite/
2014-08-05 Adrian Sendroiu <adrian.sendroiu@freescale.com>
* gdb.mi/mi-logging.exp: Add test for nested mi redirection.
* lib/gdb.exp: (skip_python_tests_prompt): New function.
(skip_python_tests): Use skip_python_tests_prompt.
* lib/mi-support.exp: (mi_skip_python_tests): New function.
---
gdb/mi/mi-out.c | 77 ++++++++++++++++++++---------------
gdb/testsuite/gdb.mi/mi-logging.exp | 14 +++++++
gdb/testsuite/lib/gdb.exp | 20 +++++----
gdb/testsuite/lib/mi-support.exp | 7 ++++
4 files changed, 77 insertions(+), 41 deletions(-)
diff --git a/gdb/mi/mi-out.c b/gdb/mi/mi-out.c
index 6ec41e6..6731509 100644
--- a/gdb/mi/mi-out.c
+++ b/gdb/mi/mi-out.c
@@ -22,14 +22,17 @@
#include "defs.h"
#include "ui-out.h"
#include "mi-out.h"
+#include "vec.h"
+
+typedef struct ui_file *ui_filep;
+DEF_VEC_P (ui_filep);
struct ui_out_data
{
int suppress_field_separator;
int suppress_output;
int mi_version;
- struct ui_file *buffer;
- struct ui_file *original_buffer;
+ VEC (ui_filep) *streams;
};
typedef struct ui_out_data mi_out_data;
@@ -215,17 +218,20 @@ mi_field_string (struct ui_out *uiout, int fldno, int width,
enum ui_align align, const char *fldname, const char *string)
{
mi_out_data *data = ui_out_data (uiout);
+ struct ui_file *stream;
if (data->suppress_output)
return;
+ stream = VEC_last (ui_filep, data->streams);
+
field_separator (uiout);
if (fldname)
- fprintf_unfiltered (data->buffer, "%s=", fldname);
- fprintf_unfiltered (data->buffer, "\"");
+ fprintf_unfiltered (stream, "%s=", fldname);
+ fprintf_unfiltered (stream, "\"");
if (string)
- fputstr_unfiltered (string, '"', data->buffer);
- fprintf_unfiltered (data->buffer, "\"");
+ fputstr_unfiltered (string, '"', stream);
+ fprintf_unfiltered (stream, "\"");
}
/* This is the only field function that does not align. */
@@ -236,17 +242,20 @@ mi_field_fmt (struct ui_out *uiout, int fldno, int width,
const char *format, va_list args)
{
mi_out_data *data = ui_out_data (uiout);
+ struct ui_file *stream;
if (data->suppress_output)
return;
+ stream = VEC_last (ui_filep, data->streams);
+
field_separator (uiout);
if (fldname)
- fprintf_unfiltered (data->buffer, "%s=\"", fldname);
+ fprintf_unfiltered (stream, "%s=\"", fldname);
else
- fputs_unfiltered ("\"", data->buffer);
- vfprintf_unfiltered (data->buffer, format, args);
- fputs_unfiltered ("\"", data->buffer);
+ fputs_unfiltered ("\"", stream);
+ vfprintf_unfiltered (stream, format, args);
+ fputs_unfiltered ("\"", stream);
}
void
@@ -275,8 +284,9 @@ void
mi_flush (struct ui_out *uiout)
{
mi_out_data *data = ui_out_data (uiout);
+ struct ui_file *stream = VEC_last (ui_filep, data->streams);
- gdb_flush (data->buffer);
+ gdb_flush (stream);
}
int
@@ -285,15 +295,9 @@ mi_redirect (struct ui_out *uiout, struct ui_file *outstream)
mi_out_data *data = ui_out_data (uiout);
if (outstream != NULL)
- {
- data->original_buffer = data->buffer;
- data->buffer = outstream;
- }
- else if (data->original_buffer != NULL)
- {
- data->buffer = data->original_buffer;
- data->original_buffer = NULL;
- }
+ VEC_safe_push (ui_filep, data->streams, outstream);
+ else
+ VEC_pop (ui_filep, data->streams);
return 0;
}
@@ -306,29 +310,31 @@ static void
field_separator (struct ui_out *uiout)
{
mi_out_data *data = ui_out_data (uiout);
+ struct ui_file *stream = VEC_last (ui_filep, data->streams);
if (data->suppress_field_separator)
data->suppress_field_separator = 0;
else
- fputc_unfiltered (',', data->buffer);
+ fputc_unfiltered (',', stream);
}
static void
mi_open (struct ui_out *uiout, const char *name, enum ui_out_type type)
{
mi_out_data *data = ui_out_data (uiout);
+ struct ui_file *stream = VEC_last (ui_filep, data->streams);
field_separator (uiout);
data->suppress_field_separator = 1;
if (name)
- fprintf_unfiltered (data->buffer, "%s=", name);
+ fprintf_unfiltered (stream, "%s=", name);
switch (type)
{
case ui_out_type_tuple:
- fputc_unfiltered ('{', data->buffer);
+ fputc_unfiltered ('{', stream);
break;
case ui_out_type_list:
- fputc_unfiltered ('[', data->buffer);
+ fputc_unfiltered ('[', stream);
break;
default:
internal_error (__FILE__, __LINE__, _("bad switch"));
@@ -339,14 +345,15 @@ static void
mi_close (struct ui_out *uiout, enum ui_out_type type)
{
mi_out_data *data = ui_out_data (uiout);
+ struct ui_file *stream = VEC_last (ui_filep, data->streams);
switch (type)
{
case ui_out_type_tuple:
- fputc_unfiltered ('}', data->buffer);
+ fputc_unfiltered ('}', stream);
break;
case ui_out_type_list:
- fputc_unfiltered (']', data->buffer);
+ fputc_unfiltered (']', stream);
break;
default:
internal_error (__FILE__, __LINE__, _("bad switch"));
@@ -360,8 +367,9 @@ void
mi_out_buffered (struct ui_out *uiout, char *string)
{
mi_out_data *data = ui_out_data (uiout);
+ struct ui_file *stream = VEC_last (ui_filep, data->streams);
- fprintf_unfiltered (data->buffer, "%s", string);
+ fprintf_unfiltered (stream, "%s", string);
}
/* Clear the buffer. */
@@ -370,8 +378,9 @@ void
mi_out_rewind (struct ui_out *uiout)
{
mi_out_data *data = ui_out_data (uiout);
+ struct ui_file *stream = VEC_last (ui_filep, data->streams);
- ui_file_rewind (data->buffer);
+ ui_file_rewind (stream);
}
/* Dump the buffer onto the specified stream. */
@@ -386,9 +395,10 @@ void
mi_out_put (struct ui_out *uiout, struct ui_file *stream)
{
mi_out_data *data = ui_out_data (uiout);
+ struct ui_file *current_stream = VEC_last (ui_filep, data->streams);
- ui_file_put (data->buffer, do_write, stream);
- ui_file_rewind (data->buffer);
+ ui_file_put (current_stream, do_write, stream);
+ ui_file_rewind (current_stream);
}
/* Return the current MI version. */
@@ -407,13 +417,14 @@ struct ui_out *
mi_out_new (int mi_version)
{
int flags = 0;
+ struct ui_file *new_stream;
mi_out_data *data = XNEW (mi_out_data);
data->suppress_field_separator = 0;
data->suppress_output = 0;
data->mi_version = mi_version;
- /* FIXME: This code should be using a ``string_file'' and not the
- TUI buffer hack. */
- data->buffer = mem_fileopen ();
+ data->streams = NULL;
+ new_stream = mem_fileopen ();
+ VEC_safe_push (ui_filep, data->streams, new_stream);
return ui_out_new (&mi_ui_out_impl, data, flags);
}
diff --git a/gdb/testsuite/gdb.mi/mi-logging.exp b/gdb/testsuite/gdb.mi/mi-logging.exp
index d5e4193..bd884d3 100644
--- a/gdb/testsuite/gdb.mi/mi-logging.exp
+++ b/gdb/testsuite/gdb.mi/mi-logging.exp
@@ -82,6 +82,20 @@ if [regexp "1001\\^done\[\r\n\]+$mi_log_prompt.*1002\\^running\[\r\n\]+\\*runnin
fail "Redirect log file contents"
}
+# This triggers a nested mi_ui_out redirection, by executing a python command
+# inside another python command, both of which are run with to_string = True.
+if ![mi_skip_python_tests] {
+ mi_gdb_test "-break-insert do_nothing" ".*"
+ mi_gdb_test "commands \$bpnum\npython gdb.execute('python gdb.execute(\"help\", True, True)', True, True)\nend" ".*"
+
+ mi_send_resuming_command "exec-continue" "continue"
+
+ mi_expect_stop "breakpoint-hit" "do_nothing" ".*" ".*" ".*" {".*" ".*"} "Continue to breakpoint"
+
+ # This will crash gdb if redirection is not done properly.
+ mi_gdb_test "help" ".*" "nested redirect"
+}
+
mi_gdb_exit
remote_file host delete $milogfile
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
index 8cb98ae..8bb2d23 100644
--- a/gdb/testsuite/lib/gdb.exp
+++ b/gdb/testsuite/lib/gdb.exp
@@ -1603,34 +1603,33 @@ proc skip_d_tests {} {
# Return a 1 for configurations that do not support Python scripting.
-proc skip_python_tests {} {
- global gdb_prompt
+proc skip_python_tests_prompt { prompt_re } {
global gdb_py_is_py3k
global gdb_py_is_py24
gdb_test_multiple "python print ('test')" "verify python support" {
- -re "not supported.*$gdb_prompt $" {
+ -re "not supported.*$prompt_re" {
unsupported "Python support is disabled."
return 1
}
- -re "$gdb_prompt $" {}
+ -re "$prompt_re" {}
}
set gdb_py_is_py24 0
gdb_test_multiple "python print (sys.version_info\[0\])" "check if python 3" {
- -re "3.*$gdb_prompt $" {
+ -re "3.*$prompt_re" {
set gdb_py_is_py3k 1
}
- -re ".*$gdb_prompt $" {
+ -re ".*$prompt_re" {
set gdb_py_is_py3k 0
}
}
if { $gdb_py_is_py3k == 0 } {
gdb_test_multiple "python print (sys.version_info\[1\])" "check if python 2.4" {
- -re "\[45\].*$gdb_prompt $" {
+ -re "\[45\].*$prompt_re" {
set gdb_py_is_py24 1
}
- -re ".*$gdb_prompt $" {
+ -re ".*$prompt_re" {
set gdb_py_is_py24 0
}
}
@@ -1639,6 +1638,11 @@ proc skip_python_tests {} {
return 0
}
+proc skip_python_tests { } {
+ global gdb_prompt
+ skip_python_tests_prompt "$gdb_prompt $"
+}
+
# Return a 1 if we should skip shared library tests.
proc skip_shlib_tests {} {
diff --git a/gdb/testsuite/lib/mi-support.exp b/gdb/testsuite/lib/mi-support.exp
index 204f1e8..80a3627 100644
--- a/gdb/testsuite/lib/mi-support.exp
+++ b/gdb/testsuite/lib/mi-support.exp
@@ -2491,3 +2491,10 @@ proc mi_make_breakpoint_table {bp_list} {
# Assemble the final regexp.
return "BreakpointTable={nr_rows=\"$nr\",nr_cols=\"$nc\",$header,$body}"
}
+
+# Return a 1 for configurations that do not support Python scripting.
+
+proc mi_skip_python_tests {} {
+ global mi_gdb_prompt
+ skip_python_tests_prompt "$mi_gdb_prompt$"
+}
--
1.7.9.5
next prev parent reply other threads:[~2014-08-05 13:54 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-23 14:26 [PATCH 0/2] Reimplement redirection for MI Adrian Sendroiu
2014-07-23 14:26 ` [PATCH 2/2] mi-out: Implement mi redirection using a stack Adrian Sendroiu
2014-07-24 20:34 ` Tom Tromey
2014-07-25 11:43 ` [PATCH v2 " Adrian Sendroiu
2014-07-29 15:16 ` Pedro Alves
2014-07-30 8:38 ` Adrian Sendroiu
2014-07-30 12:05 ` Pedro Alves
2014-07-31 16:23 ` Adrian Sendroiu
2014-07-31 17:11 ` Pedro Alves
2014-08-05 13:54 ` Adrian Sendroiu [this message]
2014-08-28 11:33 ` Adrian Sendroiu
2014-09-05 16:06 ` Pedro Alves
2014-09-07 15:45 ` Adrian Sendroiu
2014-09-08 13:19 ` Pedro Alves
2014-09-08 18:59 ` Sergio Durigan Junior
2014-09-09 14:03 ` Adrian Sendroiu
2014-09-26 9:25 ` Adrian Sendroiu
2014-09-26 12:51 ` Pedro Alves
2014-07-23 14:37 ` [PATCH 1/2] cli/cli-logging.c: don't call ui_out_redirect for MI when disabling logging Adrian Sendroiu
2014-07-24 18:19 ` Tom Tromey
2015-08-17 18:47 ` [PATCH 0/2] Reimplement redirection for MI Doug Evans
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53E0E251.7040803@freescale.com \
--to=adrian.sendroiu@freescale.com \
--cc=gdb-patches@sourceware.org \
--cc=palves@redhat.com \
--cc=tromey@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).