* MIPS build slave @ 2015-07-18 4:15 Simon Marchi 2015-07-18 5:28 ` Brendan Kirby 0 siblings, 1 reply; 17+ messages in thread From: Simon Marchi @ 2015-07-18 4:15 UTC (permalink / raw) To: gdb-patches, Brendan Kirby Hi Brendan, TLDR: I think most of the tests don't run properly on the MIPS build slaves, check gdb.log for "Cannot exec". Long version: I am trying to clear an unexpected pass in mi-watch.exp (the test expects gdb to fail, but it seems to work fine). git tells me the xfail was added by commit 4a543da in 2007 and that it was added with the MIPS platform in mind: https://www.sourceware.org/ml/gdb-patches/2007-09/msg00151.html I would therefore like to see if the test passes correctly on the MIPS platform today before removing the xfail. Unfortunately, the test doesn't run on the buildbot. You can check the gdb.log here, search for mi-watch.exp (warning, that's a very big file): http://gdb-build.sergiodj.net/cgit/Debian-MIPS-m64/.git/plain/gdb.log Here is the important snippet (with messed up formatting since I'm using gmail, sorry): 220-exec-run &"Cannot exec /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch -c exec /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch .\n" &"Error: No such file or directory\n" =thread-group-started,id="i1",pid="30605" =thread-created,id="1",group-id="i1" =thread-exited,id="1",group-id="i1" =thread-group-exited,id="i1" 220^error,msg="During startup program exited with code 127." (gdb) ERROR: Unable to start target There are many other tests that have the same problem, which is why I suspect that the tests don't run as they should. Simon ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-18 4:15 MIPS build slave Simon Marchi @ 2015-07-18 5:28 ` Brendan Kirby 2015-07-19 2:35 ` Sergio Durigan Junior 0 siblings, 1 reply; 17+ messages in thread From: Brendan Kirby @ 2015-07-18 5:28 UTC (permalink / raw) To: Simon Marchi, gdb-patches Simon, If I'm reading this right, it looks like it's trying to exec a file that doesn't exist. I think it's trying to exec: /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch In fact, I'm not seeing any of the sub-directories either. The first directory I'm seeing is: /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/ If it helps, here's the contents of that directory: total 196 -rw-r--r-- 1 buildbot buildbot 19273 Jul 17 21:57 config.log -rwxr-xr-x 1 buildbot buildbot 29244 Jul 17 21:57 config.status drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.ada drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.arch drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.asm drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.base drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.btrace drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.cell drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.compile drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.cp drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.disasm drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.dlang drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.dwarf2 drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.fortran drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.gdb drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.go drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.guile drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.java drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.linespec drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.mi drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.modula2 drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.multi drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.objc drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.opencl drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.opt drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.pascal drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.perf drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.python drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.reverse drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.server drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.stabs drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.threads drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.trace drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 gdb.xml drwxr-xr-x 2 buildbot buildbot 4096 Jul 17 21:57 lib -rw-r--r-- 1 buildbot buildbot 10521 Jul 17 21:57 Makefile I don't know what was supposed to have happened. So, let me know what you want me to try. Brendan On 07/17/2015 09:14 PM, Simon Marchi wrote: > Hi Brendan, > > TLDR: I think most of the tests don't run properly on the MIPS build > slaves, check gdb.log for "Cannot exec". > > Long version: > > I am trying to clear an unexpected pass in mi-watch.exp (the test > expects gdb to fail, but it seems to work fine). git tells me the > xfail was added by commit 4a543da in 2007 and that it was added with > the MIPS platform in mind: > https://www.sourceware.org/ml/gdb-patches/2007-09/msg00151.html > > I would therefore like to see if the test passes correctly on the MIPS > platform today before removing the xfail. Unfortunately, the test > doesn't run on the buildbot. > > You can check the gdb.log here, search for mi-watch.exp (warning, > that's a very big file): > http://gdb-build.sergiodj.net/cgit/Debian-MIPS-m64/.git/plain/gdb.log > > Here is the important snippet (with messed up formatting since I'm > using gmail, sorry): > > 220-exec-run > &"Cannot exec /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch > -c exec /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch > .\n" > &"Error: No such file or directory\n" > =thread-group-started,id="i1",pid="30605" > =thread-created,id="1",group-id="i1" > =thread-exited,id="1",group-id="i1" > =thread-group-exited,id="i1" > 220^error,msg="During startup program exited with code 127." > (gdb) > ERROR: Unable to start target > > There are many other tests that have the same problem, which is why I > suspect that the tests don't run as they should. > > Simon ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-18 5:28 ` Brendan Kirby @ 2015-07-19 2:35 ` Sergio Durigan Junior 2015-07-20 20:04 ` Brendan Kirby 0 siblings, 1 reply; 17+ messages in thread From: Sergio Durigan Junior @ 2015-07-19 2:35 UTC (permalink / raw) To: Brendan Kirby; +Cc: Simon Marchi, gdb-patches On Saturday, July 18 2015, Brendan Kirby wrote: Hi Brendan, > If I'm reading this right, it looks like it's trying to exec a file that > doesn't exist. I think it's trying to exec: > /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch This file should exist, because it was correctly compiled before during the testcase run: Executing on host: gcc ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c -g -lm -o /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch (timeout = 300) spawn gcc ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c -g -lm -o /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch > In fact, I'm not seeing any of the sub-directories either. The first > directory I'm seeing is: > /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/ The debian-mips-m64 directory gets removed on every build, so depending on when you examine it you won't find the testsuite results there. My first advice would be to replicate what the BuildBot does to compile GDB, but on a temporary directory outside the buildslave's dir (so that you won't affect existing builds). Feel free to stop your buildslave while doing the steps below, if you are afraid it's going to be too much for the poor hardware. For example, you can do: ../binutils-gdb/configure --disable-binutils --disable-ld --disable-gold \ --disable-gas --disable-sim --disable-gprof --enable-targets=all --with-separate-debug-dir=/usr/lib/debug make -j1 all make -k check -j1 FORCE_PARALLEL=1 # see below before typing this Running the entire testsuite may be too much, so you can run only one test by doing: make check RUNTESTFLAGS='gdb.mi/mi-watch.exp' That should give you/us some clues about what's going on. Thanks, -- Sergio GPG key ID: 237A 54B1 0287 28BF 00EF 31F4 D0EB 7628 65FC 5E36 Please send encrypted e-mail if possible http://sergiodj.net/ ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-19 2:35 ` Sergio Durigan Junior @ 2015-07-20 20:04 ` Brendan Kirby 2015-07-20 20:45 ` Simon Marchi 2015-07-20 21:05 ` Sergio Durigan Junior 0 siblings, 2 replies; 17+ messages in thread From: Brendan Kirby @ 2015-07-20 20:04 UTC (permalink / raw) To: Sergio Durigan Junior; +Cc: Simon Marchi, gdb-patches [-- Attachment #1: Type: text/plain, Size: 2572 bytes --] On 07/18/2015 07:30 PM, Sergio Durigan Junior wrote: > On Saturday, July 18 2015, Brendan Kirby wrote: > > Hi Brendan, > >> If I'm reading this right, it looks like it's trying to exec a file that >> doesn't exist. I think it's trying to exec: >> /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch > This file should exist, because it was correctly compiled before during > the testcase run: > > Executing on host: gcc ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c -g -lm -o /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch (timeout = 300) > spawn gcc ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c -g -lm -o /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch I ran the steps below. The build was successful. I built with commit 7ac018954bd9 because the latest one was failing to build. However, I'm still not seeing this file. I've attached the output of running "make check RUNTESTFLAGS='gdb.mi/mi-watch.exp'" in the file gdb.mi-mi-watch.exp.out and I've attached the gdb/testsuite/gdb.log file in gdb.mi-mi-watch.exp.log. Let me know if you want me to try anything else. Brendan > >> In fact, I'm not seeing any of the sub-directories either. The first >> directory I'm seeing is: >> /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/ > The debian-mips-m64 directory gets removed on every build, so depending > on when you examine it you won't find the testsuite results there. > > My first advice would be to replicate what the BuildBot does to compile > GDB, but on a temporary directory outside the buildslave's dir (so that > you won't affect existing builds). Feel free to stop your buildslave > while doing the steps below, if you are afraid it's going to be too much > for the poor hardware. > > For example, you can do: > > ../binutils-gdb/configure --disable-binutils --disable-ld --disable-gold \ > --disable-gas --disable-sim --disable-gprof --enable-targets=all --with-separate-debug-dir=/usr/lib/debug > make -j1 all > make -k check -j1 FORCE_PARALLEL=1 # see below before typing this > > Running the entire testsuite may be too much, so you can run only one > test by doing: > > make check RUNTESTFLAGS='gdb.mi/mi-watch.exp' > > That should give you/us some clues about what's going on. > > Thanks, > [-- Attachment #2: gdb.mi-mi-watch.exp.out --] [-- Type: text/plain, Size: 12551 bytes --] make[1]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make check-recursive make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' Making check in doc make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/doc' make[4]: Nothing to be done for 'check'. make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/doc' Making check in po make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/po' file=`echo ../../../binutils-gdb/bfd/po/da | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/da.po file=`echo ../../../binutils-gdb/bfd/po/es | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/es.po file=`echo ../../../binutils-gdb/bfd/po/fi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/fi.po file=`echo ../../../binutils-gdb/bfd/po/fr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/fr.po file=`echo ../../../binutils-gdb/bfd/po/id | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/id.po file=`echo ../../../binutils-gdb/bfd/po/ja | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/ja.po file=`echo ../../../binutils-gdb/bfd/po/ro | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/ro.po file=`echo ../../../binutils-gdb/bfd/po/ru | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/ru.po file=`echo ../../../binutils-gdb/bfd/po/rw | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/rw.po file=`echo ../../../binutils-gdb/bfd/po/sv | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/sv.po file=`echo ../../../binutils-gdb/bfd/po/tr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/tr.po file=`echo ../../../binutils-gdb/bfd/po/uk | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/uk.po file=`echo ../../../binutils-gdb/bfd/po/vi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/vi.po file=`echo ../../../binutils-gdb/bfd/po/zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/zh_CN.po make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/po' make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' Making check in . make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' Making check in po make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes/po' file=`echo ../../../binutils-gdb/opcodes/po/da | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/da.po file=`echo ../../../binutils-gdb/opcodes/po/de | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/de.po file=`echo ../../../binutils-gdb/opcodes/po/es | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/es.po file=`echo ../../../binutils-gdb/opcodes/po/fi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/fi.po file=`echo ../../../binutils-gdb/opcodes/po/fr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/fr.po file=`echo ../../../binutils-gdb/opcodes/po/ga | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/ga.po file=`echo ../../../binutils-gdb/opcodes/po/id | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/id.po file=`echo ../../../binutils-gdb/opcodes/po/it | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/it.po file=`echo ../../../binutils-gdb/opcodes/po/nl | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/nl.po file=`echo ../../../binutils-gdb/opcodes/po/pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/pt_BR.po file=`echo ../../../binutils-gdb/opcodes/po/ro | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/ro.po file=`echo ../../../binutils-gdb/opcodes/po/sv | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/sv.po file=`echo ../../../binutils-gdb/opcodes/po/tr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/tr.po file=`echo ../../../binutils-gdb/opcodes/po/uk | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/uk.po file=`echo ../../../binutils-gdb/opcodes/po/vi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/vi.po file=`echo ../../../binutils-gdb/opcodes/po/zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/zh_CN.po make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes/po' make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/etc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/etc' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/intl' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/intl' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libdecnumber' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libdecnumber' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty' make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty/testsuite' ./test-demangle < ../../../binutils-gdb/libiberty/testsuite/demangle-expected ./test-demangle: 898 tests, 0 failures ./test-demangle < ../../../binutils-gdb/libiberty/testsuite/d-demangle-expected ./test-demangle: 266 tests, 0 failures ./test-pexecute ./test-expandargv PASS: test-expandargv-0. PASS: test-expandargv-1. PASS: test-expandargv-2. PASS: test-expandargv-3. PASS: test-expandargv-4. PASS: test-expandargv-5. PASS: test-expandargv-6. ./test-strtol PASS: test-strtol-0. PASS: test-strtol-1. PASS: test-strtol-2. PASS: test-strtol-3. PASS: test-strtol-4. PASS: test-strtol-5. PASS: test-strtol-6. PASS: test-strtol-7. PASS: test-strtol-8. PASS: test-strtol-9. PASS: test-strtol-10. PASS: test-strtol-11. PASS: test-strtol-12. PASS: test-strtol-13. PASS: test-strtol-14. PASS: test-strtol-15. PASS: test-strtol-16. PASS: test-strtol-17. PASS: test-strtol-18. PASS: test-strtol-19. PASS: test-strtol-20. PASS: test-strtol-21. PASS: test-strtol-22. PASS: test-strtol-23. make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty/testsuite' make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/readline' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/readline' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb' make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite' Nothing to be done for all... make check-single make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite' rootme=`pwd`; export rootme; srcdir=../../../binutils-gdb/gdb/testsuite ; export srcdir ; EXPECT=`if [ "${READ1}" != "" ] ; then echo ${rootme}/expect-read1; elif [ -f ${rootme}/../../expect/expect ] ; then echo ${rootme}/../../expect/expect ; else echo expect ; fi` ; export EXPECT ; EXEEXT= ; export EXEEXT ; LD_LIBRARY_PATH=$rootme/../../expect:$rootme/../../libstdc++:$rootme/../../tk/unix:$rootme/../../tcl/unix:$rootme/../../bfd:$rootme/../../opcodes:$LD_LIBRARY_PATH; export LD_LIBRARY_PATH; if [ -f ${rootme}/../../expect/expect ] ; then TCL_LIBRARY=${srcdir}/../../tcl/library ; export TCL_LIBRARY ; fi ; runtest gdb.mi/mi-watch.exp Test Run By buildbot on Mon Jul 20 12:57:57 2015 Native configuration is mips64-unknown-linux-gnu === gdb tests === Schedule of variations: unix Running target unix Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target. Using /usr/share/dejagnu/config/unix.exp as generic interface file for target. Using ../../../binutils-gdb/gdb/testsuite/config/unix.exp as tool-and-target-specific interface file. Running ../../../binutils-gdb/gdb/testsuite/gdb.mi/mi-watch.exp ... XPASS: gdb.mi/mi-watch.exp: sw: watchpoint trigger === gdb Summary === # of expected passes 13 # of unexpected successes 1 /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb version 7.10.50.20150720-cvs -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory Makefile:196: recipe for target 'check-single' failed make[4]: *** [check-single] Error 1 make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite' Makefile:155: recipe for target 'check' failed make[3]: *** [check] Error 2 make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite' Makefile:1144: recipe for target 'check' failed make[2]: *** [check] Error 2 make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb' Makefile:8772: recipe for target 'check-gdb' failed make[1]: *** [check-gdb] Error 2 make[1]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build' Makefile:2198: recipe for target 'do-check' failed make: *** [do-check] Error 2 [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #3: gdb.mi-mi-watch.exp.log --] [-- Type: text/x-log; name="gdb.mi-mi-watch.exp.log", Size: 20571 bytes --] Test Run By buildbot on Mon Jul 20 12:57:57 2015 Native configuration is mips64-unknown-linux-gnu === gdb tests === Schedule of variations: unix Running target unix Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target. Using /usr/share/dejagnu/config/unix.exp as generic interface file for target. Using ../../../binutils-gdb/gdb/testsuite/config/unix.exp as tool-and-target-specific interface file. Running ../../../binutils-gdb/gdb/testsuite/gdb.mi/mi-watch.exp ... spawn /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory -i=mi =thread-group-added,id="i1" ~"GNU gdb (GDB) 7.10.50.20150720-cvs\n" ~"Copyright (C) 2015 Free Software Foundation, Inc.\n" ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law. Type \"show copying\"\nand \"show warranty\" for details.\n" ~"This GDB was configured as \"mips64-unknown-linux-gnu\".\nType \"show configuration\" for configuration details." ~"\nFor bug reporting instructions, please see:\n" ~"<http://www.gnu.org/software/gdb/bugs/>.\n" ~"Find the GDB manual and other documentation resources online at:\n<http://www.gnu.org/software/gdb/documentation/>.\n" ~"For help, type \"help\".\n" ~"Type \"apropos word\" to search for commands related to \"word\".\n" (gdb) 100-gdb-set height 0 100^done (gdb) 101-gdb-set width 0 101^done (gdb) show mi-async &"show mi-async\n" ~"Whether MI is in asynchronous mode is off.\n" ^done (gdb) Executing on host: gcc ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c -g -lm -o /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/gdb.mi/mi-watch (timeout = 300) spawn gcc ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c -g -lm -o /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/gdb.mi/mi-watch Expecting: ^(567-gdb-set can-use-hw-watchpoints 0[ ]+)?(567\^done[ ]+[(]gdb[)] [ ]*) 567-gdb-set can-use-hw-watchpoints 0 567^done (gdb) PASS: gdb.mi/mi-watch.exp: hw watchpoints toggle (1) 102-break-delete 102^done (gdb) 103-break-list 103^done,BreakpointTable={nr_rows="0",nr_cols="6",hdr=[{width="7",alignment="-1",col_name="number",colhdr="Num"},{width="14",alignment="-1",col_name="type",colhdr="Type"},{width="4",alignment="-1",col_name="disp",colhdr="Disp"},{width="3",alignment="-1",col_name="enabled",colhdr="Enb"},{width="10",alignment="-1",col_name="addr",colhdr="Address"},{width="40",alignment="2",col_name="what",colhdr="What"}],body=[]} (gdb) 104-environment-directory -r 104^done,source-path="$cdir:$cwd" (gdb) 105-environment-directory ../../../binutils-gdb/gdb/testsuite/gdb.mi 105^done,source-path="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.mi:$cdir:$cwd" (gdb) 105-file-exec-and-symbols /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/gdb.mi/mi-watch 105^done (gdb) Expecting: ^(200-break-insert -t callee4[ ]+)?(200\^done,bkpt={number=".*",type="breakpoint",disp="del",enabled=".*",addr=".*",func="callee4(\(.*\))?",file=".*",fullname=".*",line=".*",thread-groups=\[.*\],times=".*".*original-location=".*"}[ ]+[(]gdb[)] [ ]*) 200-break-insert -t callee4 200^done,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x004006ec",func="callee4",file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25",thread-groups=["i1"],times="0",original-location="callee4"} (gdb) PASS: gdb.mi/mi-watch.exp: sw: breakpoint at callee4 220-exec-run =thread-group-started,id="i1",pid="32703" =thread-created,id="1",group-id="i1" =library-loaded,id="/lib/ld.so.1",target-name="/lib/ld.so.1",host-name="/lib/ld.so.1",symbols-loaded="0",thread-group="i1" 220^running *running,thread-id="all" (gdb) mi_expect_stop: expecting: \*stopped,reason="breakpoint-hit",disp="del",bkptno="[0-9]+",frame={addr="0x[0-9A-Fa-f]+",func="callee4",args=\[.*\],(?:file="[^ ]*.*",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*",line="[0-9]+"|from=".*")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ =library-loaded,id="/lib/mips-linux-gnu/libm.so.6",target-name="/lib/mips-linux-gnu/libm.so.6",host-name="/lib/mips-linux-gnu/libm.so.6",symbols-loaded="0",thread-group="i1" =library-loaded,id="/lib/mips-linux-gnu/libc.so.6",target-name="/lib/mips-linux-gnu/libc.so.6",host-name="/lib/mips-linux-gnu/libc.so.6",symbols-loaded="0",thread-group="i1" =breakpoint-modified,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x004006ec",func="callee4",file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25",thread-groups=["i1"],times="1",original-location="callee4"} ~"\nTemporary breakpoint " ~"1, callee4 () at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:25\n" ~"25\t int A=1;\n" *stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x004006ec",func="callee4",args=[],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="1" (gdb) PASS: gdb.mi/mi-watch.exp: sw: mi runto callee4 Expecting: ^(111-break-watch C[ ]+)?(111\^done,wpt={number="2",exp="C"}[ ]+[(]gdb[)] [ ]*) 111-break-watch C 111^done,wpt={number="2",exp="C"} (gdb) PASS: gdb.mi/mi-watch.exp: sw: break-watch operation Expecting: ^(222-break-list[ ]+)?(222\^done,BreakpointTable={nr_rows=".",nr_cols=".",hdr=\[{width=".*",alignment=".*",col_name="number",colhdr="Num"}.*colhdr="Type".*colhdr="Disp".*colhdr="Enb".*colhdr="Address".*colhdr="What".*\],body=\[bkpt={number="2",type=".*watchpoint",disp="keep",enabled="y",what="C",thread-groups=\["i1"\],times="0",original-location="C"}\]}[ ]+[(]gdb[)] [ ]*) 222-break-list 222^done,BreakpointTable={nr_rows="1",nr_cols="6",hdr=[{width="7",alignment="-1",col_name="number",colhdr="Num"},{width="14",alignment="-1",col_name="type",colhdr="Type"},{width="4",alignment="-1",col_name="disp",colhdr="Disp"},{width="3",alignment="-1",col_name="enabled",colhdr="Enb"},{width="10",alignment="-1",col_name="addr",colhdr="Address"},{width="40",alignment="2",col_name="what",colhdr="What"}],body=[bkpt={number="2",type="watchpoint",disp="keep",enabled="y",what="C",thread-groups=["i1"],times="0",original-location="C"}]} (gdb) PASS: gdb.mi/mi-watch.exp: sw: list of watchpoints -exec-continue ^running *running,thread-id="all" (gdb) =breakpoint-modified,bkpt={number="2",type="watchpoint",disp="keep",enabled="y",what="C",thread-groups=["i1"],times="1",original-location="C"} ~"Watchpoint 2: C\n" mi_expect_stop: expecting: \*stopped,reason="watchpoint-trigger",wpt={number="2",exp="C"},value={old=".*",new="3"},frame={addr="0x[0-9A-Fa-f]+",func="callee4",args=\[\],(?:file="[^ ]*.*basics.c",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*basics.c",line="30"|from=".*basics.c")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ ~"\nOld value = " ~"-163754450\nNew value = " ~"3\n" ~"callee4 () at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:30\n" ~"30\t return 0;\n" *stopped,reason="watchpoint-trigger",wpt={number="2",exp="C"},value={old="-163754450",new="3"},frame={addr="0x0040070c",func="callee4",args=[],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="30"},thread-id="1",stopped-threads="all",core="0" (gdb) PASS: gdb.mi/mi-watch.exp: sw: watchpoint trigger -exec-continue ^running *running,thread-id="all" (gdb) mi_expect_stop: expecting: \*stopped,reason="watchpoint-scope",wpnum="2",frame={addr="0x[0-9A-Fa-f]+",func="callee3",args=\[.*\],(?:file="[^ ]*.*basics.c",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*basics.c",line="35"|from=".*basics.c")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ =breakpoint-modified,bkpt={number="2",type="watchpoint",disp="dstp",enabled="y",what="C",thread-groups=["i1"],times="2",original-location="C"} ~"callee3 (strarg=0x4009f0 \"A string argument.\") at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" *stopped,reason="watchpoint-scope",wpnum="2",frame={addr="0x00400740",func="callee3",args=[{name="strarg",value="0x4009f0 \"A string argument.\""}],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="35"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="2" (gdb) XPASS: gdb.mi/mi-watch.exp: sw: watchpoint trigger spawn /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory -i=mi =thread-group-added,id="i1" ~"GNU gdb (GDB) 7.10.50.20150720-cvs\n" ~"Copyright (C) 2015 Free Software Foundation, Inc.\n" ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law. Type \"show copying\"\nand \"show warranty\" for details.\n" ~"This GDB was configured as \"mips64-unknown-linux-gnu\".\nType \"show configuration\" for configuration details." ~"\nFor bug reporting instructions, please see:\n" ~"<http://www.gnu.org/software/gdb/bugs/>.\n" ~"Find the GDB manual and other documentation resources online at:\n<http://www.gnu.org/software/gdb/documentation/>.\n" ~"For help, type \"help\".\n" ~"Type \"apropos word\" to search for commands related to \"word\".\n" (gdb) 100-gdb-set height 0 100^done (gdb) 101-gdb-set width 0 101^done (gdb) show mi-async &"show mi-async\n" ~"Whether MI is in asynchronous mode is off.\n" ^done (gdb) Expecting: ^(890-gdb-set can-use-hw-watchpoints 1[ ]+)?(890\^done[ ]+[(]gdb[)] [ ]*) 890-gdb-set can-use-hw-watchpoints 1 890^done (gdb) PASS: gdb.mi/mi-watch.exp: hw watchpoints toggle (2) 102-break-delete 102^done (gdb) 103-break-list 103^done,BreakpointTable={nr_rows="0",nr_cols="6",hdr=[{width="7",alignment="-1",col_name="number",colhdr="Num"},{width="14",alignment="-1",col_name="type",colhdr="Type"},{width="4",alignment="-1",col_name="disp",colhdr="Disp"},{width="3",alignment="-1",col_name="enabled",colhdr="Enb"},{width="10",alignment="-1",col_name="addr",colhdr="Address"},{width="40",alignment="2",col_name="what",colhdr="What"}],body=[]} (gdb) 104-environment-directory -r 104^done,source-path="$cdir:$cwd" (gdb) 105-environment-directory ../../../binutils-gdb/gdb/testsuite/gdb.mi 105^done,source-path="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.mi:$cdir:$cwd" (gdb) 105-file-exec-and-symbols /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/gdb.mi/mi-watch 105^done (gdb) Expecting: ^(200-break-insert -t callee4[ ]+)?(200\^done,bkpt={number=".*",type="breakpoint",disp="del",enabled=".*",addr=".*",func="callee4(\(.*\))?",file=".*",fullname=".*",line=".*",thread-groups=\[.*\],times=".*".*original-location=".*"}[ ]+[(]gdb[)] [ ]*) 200-break-insert -t callee4 200^done,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x004006ec",func="callee4",file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25",thread-groups=["i1"],times="0",original-location="callee4"} (gdb) PASS: gdb.mi/mi-watch.exp: hw: breakpoint at callee4 220-exec-run =thread-group-started,id="i1",pid="32722" =thread-created,id="1",group-id="i1" =library-loaded,id="/lib/ld.so.1",target-name="/lib/ld.so.1",host-name="/lib/ld.so.1",symbols-loaded="0",thread-group="i1" 220^running *running,thread-id="all" (gdb) mi_expect_stop: expecting: \*stopped,reason="breakpoint-hit",disp="del",bkptno="[0-9]+",frame={addr="0x[0-9A-Fa-f]+",func="callee4",args=\[.*\],(?:file="[^ ]*.*",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*",line="[0-9]+"|from=".*")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ =library-loaded,id="/lib/mips-linux-gnu/libm.so.6",target-name="/lib/mips-linux-gnu/libm.so.6",host-name="/lib/mips-linux-gnu/libm.so.6",symbols-loaded="0",thread-group="i1" =library-loaded,id="/lib/mips-linux-gnu/libc.so.6",target-name="/lib/mips-linux-gnu/libc.so.6",host-name="/lib/mips-linux-gnu/libc.so.6",symbols-loaded="0",thread-group="i1" =breakpoint-modified,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x004006ec",func="callee4",file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25",thread-groups=["i1"],times="1",original-location="callee4"} ~"\nTemporary breakpoint " ~"1, callee4 () at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:25\n" ~"25\t int A=1;\n" *stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x004006ec",func="callee4",args=[],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="1" (gdb) PASS: gdb.mi/mi-watch.exp: hw: mi runto callee4 Expecting: ^(111-break-watch C[ ]+)?(111\^done,wpt={number="2",exp="C"}[ ]+[(]gdb[)] [ ]*) 111-break-watch C 111^done,wpt={number="2",exp="C"} (gdb) PASS: gdb.mi/mi-watch.exp: hw: break-watch operation Expecting: ^(222-break-list[ ]+)?(222\^done,BreakpointTable={nr_rows=".",nr_cols=".",hdr=\[{width=".*",alignment=".*",col_name="number",colhdr="Num"}.*colhdr="Type".*colhdr="Disp".*colhdr="Enb".*colhdr="Address".*colhdr="What".*\],body=\[bkpt={number="2",type=".*watchpoint",disp="keep",enabled="y",what="C",thread-groups=\["i1"\],times="0",original-location="C"}\]}[ ]+[(]gdb[)] [ ]*) 222-break-list 222^done,BreakpointTable={nr_rows="1",nr_cols="6",hdr=[{width="7",alignment="-1",col_name="number",colhdr="Num"},{width="14",alignment="-1",col_name="type",colhdr="Type"},{width="4",alignment="-1",col_name="disp",colhdr="Disp"},{width="3",alignment="-1",col_name="enabled",colhdr="Enb"},{width="10",alignment="-1",col_name="addr",colhdr="Address"},{width="40",alignment="2",col_name="what",colhdr="What"}],body=[bkpt={number="2",type="hw watchpoint",disp="keep",enabled="y",what="C",thread-groups=["i1"],times="0",original-location="C"}]} (gdb) PASS: gdb.mi/mi-watch.exp: hw: list of watchpoints -exec-continue ^running *running,thread-id="all" (gdb) =breakpoint-modified,bkpt={number="2",type="hw watchpoint",disp="keep",enabled="y",what="C",thread-groups=["i1"],times="1",original-location="C"} ~"Hardware watchpoint 2: C\n" ~"\nOld value = " ~"-163754450\nNew value = " ~"3\n" ~"callee4 () at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:30\n" ~"30\t return 0;\n" *stopped,reason="watchpoint-trigger",wpt={number="2",exp="C"},value={old="-163754450",new="3"},frame={addr="0x0040070c",func="callee4",args=[],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="30"},thread-id="1",stopped-threads="all",core="0" (gdb) mi_expect_stop: expecting: \*stopped,reason="watchpoint-trigger",wpt={number="2",exp="C"},value={old=".*",new="3"},frame={addr="0x[0-9A-Fa-f]+",func="callee4",args=\[\],(?:file="[^ ]*.*basics.c",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*basics.c",line="30"|from=".*basics.c")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ PASS: gdb.mi/mi-watch.exp: hw: watchpoint trigger -exec-continue ^running *running,thread-id="all" (gdb) =breakpoint-modified,bkpt={number="2",type="hw watchpoint",disp="dstp",enabled="y",what="C",thread-groups=["i1"],times="2",original-location="C"} mi_expect_stop: expecting: \*stopped,reason="watchpoint-scope",wpnum="2",frame={addr="0x[0-9A-Fa-f]+",func="callee3",args=\[.*\],(?:file="[^ ]*.*basics.c",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*basics.c",line="35"|from=".*basics.c")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ ~"callee3 (strarg=0x4009f0 \"A string argument.\") at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" *stopped,reason="watchpoint-scope",wpnum="2",frame={addr="0x00400740",func="callee3",args=[{name="strarg",value="0x4009f0 \"A string argument.\""}],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="35"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="2" (gdb) PASS: gdb.mi/mi-watch.exp: hw: watchpoint trigger testcase ../../../binutils-gdb/gdb/testsuite/gdb.mi/mi-watch.exp completed in 4 seconds === gdb Summary === # of expected passes 13 # of unexpected successes 1 Executing on host: /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory --version (timeout = 300) spawn /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory --version GNU gdb (GDB) 7.10.50.20150720-cvs Copyright (C) 2015 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "mips64-unknown-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word". /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb version 7.10.50.20150720-cvs -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory runtest completed at Mon Jul 20 12:58:03 2015 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-20 20:04 ` Brendan Kirby @ 2015-07-20 20:45 ` Simon Marchi 2015-07-20 21:24 ` Brendan Kirby 2015-07-20 21:05 ` Sergio Durigan Junior 1 sibling, 1 reply; 17+ messages in thread From: Simon Marchi @ 2015-07-20 20:45 UTC (permalink / raw) To: gdb-patches, brendan.kirby On 15-07-20 04:04 PM, Brendan Kirby wrote: > I ran the steps below. The build was successful. I built with commit > 7ac018954bd9 because the latest one was failing to build. However, I'm > still not seeing this file. I've attached the output of running "make > check RUNTESTFLAGS='gdb.mi/mi-watch.exp'" in the file > gdb.mi-mi-watch.exp.out and I've attached the gdb/testsuite/gdb.log file > in gdb.mi-mi-watch.exp.log. Let me know if you want me to try > anything else. > > Brendan Thanks for trying that. Looking at the error message (any of them), the pattern is: Cannot exec $execfile -c exec $execfile This looks awfully as if it should be $SHELL -c exec $execfile but that somehow the exec-file name ended up in place of the shell. That command line seems to be constructed in fork-child.c:fork_inferior, but I don't see how it could end up like that. It's probably not related, but let's rule out obvious things. I notice that the SHELL of the user running the buildbot slave is be /sbin/nologin (from an output of show env in gdb.log). It seems to be a problem for some tests that use the shell command at least (search for nologin in the log). Setting the shell of the user to a real shell will help for those. When you ran the make check RUNTESTFLAGS="..." command that Sergio asked you to run, was it as the same user as the buildbot slave's user? I assume not, since the shell is nologin. Would it be possible to try it again, but this time as that user? Simon ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-20 20:45 ` Simon Marchi @ 2015-07-20 21:24 ` Brendan Kirby 2015-07-20 21:31 ` Simon Marchi 0 siblings, 1 reply; 17+ messages in thread From: Brendan Kirby @ 2015-07-20 21:24 UTC (permalink / raw) To: Simon Marchi, gdb-patches [-- Attachment #1: Type: text/plain, Size: 2398 bytes --] On 07/20/2015 01:45 PM, Simon Marchi wrote: > On 15-07-20 04:04 PM, Brendan Kirby wrote: >> I ran the steps below. The build was successful. I built with commit >> 7ac018954bd9 because the latest one was failing to build. However, I'm >> still not seeing this file. I've attached the output of running "make >> check RUNTESTFLAGS='gdb.mi/mi-watch.exp'" in the file >> gdb.mi-mi-watch.exp.out and I've attached the gdb/testsuite/gdb.log file >> in gdb.mi-mi-watch.exp.log. Let me know if you want me to try >> anything else. >> >> Brendan > Thanks for trying that. > > Looking at the error message (any of them), the pattern is: > > Cannot exec $execfile -c exec $execfile > > This looks awfully as if it should be > > $SHELL -c exec $execfile > > but that somehow the exec-file name ended up in place of the shell. That > command line seems to be constructed in fork-child.c:fork_inferior, but I > don't see how it could end up like that. > > It's probably not related, but let's rule out obvious things. I notice that > the SHELL of the user running the buildbot slave is be /sbin/nologin (from > an output of show env in gdb.log). It seems to be a problem for some tests > that use the shell command at least (search for nologin in the log). Setting > the shell of the user to a real shell will help for those. The Buildbot user has SHELL set to /bin/nologin to avoid giving the user SSH access. I'll change the SHELL environment variable to /bin/bash when I start the Buildbot slave to avoid breaking the testing. > > When you ran the make check RUNTESTFLAGS="..." command that Sergio asked you > to run, was it as the same user as the buildbot slave's user? I assume not, > since the shell is nologin. Would it be possible to try it again, but this > time as that user? When I rebuilt this morning, I was running as the same user as the Buildbot uses. Also, I had SHELL set to /bin/bash. I've just re-run the build with SHELL explicitly set on the make command like: make -j1 all SHELL=/bin/bash make check RUNTESTFLAGS='gdb.mi/mi-watch.exp' SHELL=/bin/bash I'm not seeing the messages: Cannot exec $execfile -c exec $execfile in any of the logs ("grep -i 'cannot.*exec' *" returns nothing). I'm attaching the build log from the above "make -j1 all SHELL=/bin/bash" command above as build.log as well as the newer versions of the make check and gdb.log logs. Brendan [-- Attachment #2: build-with-SHELL.out --] [-- Type: text/plain, Size: 20913 bytes --] make[1]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty' make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty/testsuite' make[3]: Nothing to be done for 'all'. make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty/testsuite' make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/intl' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/intl' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/zlib' true "AR_FLAGS=rc" "CC_FOR_BUILD=gcc" "CFLAGS=-g -O2" "CXXFLAGS=-g -O2" "CFLAGS_FOR_BUILD=-g -O2" "CFLAGS_FOR_TARGET=-g -O2 -minterlink-mips16" "INSTALL=/usr/bin/install -c" "INSTALL_DATA=/usr/bin/install -c -m 644" "INSTALL_PROGRAM=/usr/bin/install -c" "INSTALL_SCRIPT=/usr/bin/install -c" "LDFLAGS=-static-libstdc++ -static-libgcc " "LIBCFLAGS=-g -O2" "LIBCFLAGS_FOR_TARGET=-g -O2 -minterlink-mips16" "MAKE=make" "MAKEINFO=makeinfo --split-size=5000000 --split-size=5000000 " "PICFLAG=" "PICFLAG_FOR_TARGET=" "SHELL=/bin/bash" "EXPECT=expect" "RUNTEST=runtest" "RUNTESTFLAGS=" "exec_prefix=/usr/local" "infodir=/usr/local/share/info" "libdir=/usr/local/lib" "prefix=/usr/local" "tooldir=/usr/local/mips64-unknown-linux-gnu" "AR=ar" "AS=as" "CC=gcc" "CXX=g++" "LD=ld" "LIBCFLAGS=-g -O2" "NM=nm" "PICFLAG=" "RANLIB=ranlib" "DESTDIR=" DO=all multi-do # make make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/zlib' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' Making info in doc make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/doc' make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/doc' Making info in po make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/po' make[3]: Nothing to be done for 'info'. make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/po' make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[3]: Nothing to be done for 'info-am'. make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make all-recursive make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' Making all in doc make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/doc' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/doc' Making all in po make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/po' file=`echo ../../../binutils-gdb/bfd/po/da | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/da.po file=`echo ../../../binutils-gdb/bfd/po/es | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/es.po file=`echo ../../../binutils-gdb/bfd/po/fi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/fi.po file=`echo ../../../binutils-gdb/bfd/po/fr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/fr.po file=`echo ../../../binutils-gdb/bfd/po/id | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/id.po file=`echo ../../../binutils-gdb/bfd/po/ja | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/ja.po file=`echo ../../../binutils-gdb/bfd/po/ro | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/ro.po file=`echo ../../../binutils-gdb/bfd/po/ru | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/ru.po file=`echo ../../../binutils-gdb/bfd/po/rw | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/rw.po file=`echo ../../../binutils-gdb/bfd/po/sv | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/sv.po file=`echo ../../../binutils-gdb/bfd/po/tr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/tr.po file=`echo ../../../binutils-gdb/bfd/po/uk | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/uk.po file=`echo ../../../binutils-gdb/bfd/po/vi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/vi.po file=`echo ../../../binutils-gdb/bfd/po/zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/zh_CN.po make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/po' make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' make all-recursive make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' Making all in . make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' Making all in po make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes/po' file=`echo ../../../binutils-gdb/opcodes/po/da | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/da.po file=`echo ../../../binutils-gdb/opcodes/po/de | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/de.po file=`echo ../../../binutils-gdb/opcodes/po/es | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/es.po file=`echo ../../../binutils-gdb/opcodes/po/fi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/fi.po file=`echo ../../../binutils-gdb/opcodes/po/fr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/fr.po file=`echo ../../../binutils-gdb/opcodes/po/ga | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/ga.po file=`echo ../../../binutils-gdb/opcodes/po/id | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/id.po file=`echo ../../../binutils-gdb/opcodes/po/it | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/it.po file=`echo ../../../binutils-gdb/opcodes/po/nl | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/nl.po file=`echo ../../../binutils-gdb/opcodes/po/pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/pt_BR.po file=`echo ../../../binutils-gdb/opcodes/po/ro | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/ro.po file=`echo ../../../binutils-gdb/opcodes/po/sv | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/sv.po file=`echo ../../../binutils-gdb/opcodes/po/tr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/tr.po file=`echo ../../../binutils-gdb/opcodes/po/uk | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/uk.po file=`echo ../../../binutils-gdb/opcodes/po/vi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/vi.po file=`echo ../../../binutils-gdb/opcodes/po/zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/zh_CN.po make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes/po' make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/etc' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/etc' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libdecnumber' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libdecnumber' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/readline' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/readline' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb' make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb' make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib' make[5]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib' make[6]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make all-recursive make[7]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make[8]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make[8]: Nothing to be done for 'all-am'. make[8]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make[7]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make[6]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make[5]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib' make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib' make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb' make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb' make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/doc' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/doc' make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver' make[5]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver' make[6]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver' make[7]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver' make[8]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make all-recursive make[9]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make[10]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make[10]: Nothing to be done for 'all-am'. make[10]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make[9]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make[8]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make[7]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver' make[6]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver' make[6]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-libiberty-gdbserver' make[7]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-libiberty-gdbserver/testsuite' make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-libiberty-gdbserver/testsuite' make[6]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-libiberty-gdbserver' make[5]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver' make[5]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver' make[6]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver' make[7]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver' make[8]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make all-recursive make[9]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make[10]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make[10]: Nothing to be done for 'all-am'. make[10]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make[9]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make[8]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver/import' make[7]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver' make[6]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-gnulib-gdbserver' make[6]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-libiberty-gdbserver' make[7]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-libiberty-gdbserver/testsuite' make[7]: Nothing to be done for 'all'. make[7]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-libiberty-gdbserver/testsuite' make[6]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver/build-libiberty-gdbserver' make[5]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver' make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/gdbserver' make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/data-directory' make[4]: Nothing to be done for 'all'. make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/data-directory' make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib' make[5]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib' make[6]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make all-recursive make[7]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make[8]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make[8]: Nothing to be done for 'all-am'. make[8]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make[7]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make[6]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import' make[5]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib' make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib' make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb' make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb' make[1]: Nothing to be done for 'all-target'. make[1]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build' [-- Attachment #3: gdb.mi-mi-watch.exp.out --] [-- Type: text/plain, Size: 12551 bytes --] make[1]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make check-recursive make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' Making check in doc make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/doc' make[4]: Nothing to be done for 'check'. make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/doc' Making check in po make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/po' file=`echo ../../../binutils-gdb/bfd/po/da | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/da.po file=`echo ../../../binutils-gdb/bfd/po/es | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/es.po file=`echo ../../../binutils-gdb/bfd/po/fi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/fi.po file=`echo ../../../binutils-gdb/bfd/po/fr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/fr.po file=`echo ../../../binutils-gdb/bfd/po/id | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/id.po file=`echo ../../../binutils-gdb/bfd/po/ja | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/ja.po file=`echo ../../../binutils-gdb/bfd/po/ro | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/ro.po file=`echo ../../../binutils-gdb/bfd/po/ru | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/ru.po file=`echo ../../../binutils-gdb/bfd/po/rw | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/rw.po file=`echo ../../../binutils-gdb/bfd/po/sv | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/sv.po file=`echo ../../../binutils-gdb/bfd/po/tr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/tr.po file=`echo ../../../binutils-gdb/bfd/po/uk | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/uk.po file=`echo ../../../binutils-gdb/bfd/po/vi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/vi.po file=`echo ../../../binutils-gdb/bfd/po/zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/bfd/po/zh_CN.po make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd/po' make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/bfd' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' Making check in . make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' Making check in po make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes/po' file=`echo ../../../binutils-gdb/opcodes/po/da | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/da.po file=`echo ../../../binutils-gdb/opcodes/po/de | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/de.po file=`echo ../../../binutils-gdb/opcodes/po/es | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/es.po file=`echo ../../../binutils-gdb/opcodes/po/fi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/fi.po file=`echo ../../../binutils-gdb/opcodes/po/fr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/fr.po file=`echo ../../../binutils-gdb/opcodes/po/ga | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/ga.po file=`echo ../../../binutils-gdb/opcodes/po/id | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/id.po file=`echo ../../../binutils-gdb/opcodes/po/it | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/it.po file=`echo ../../../binutils-gdb/opcodes/po/nl | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/nl.po file=`echo ../../../binutils-gdb/opcodes/po/pt_BR | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/pt_BR.po file=`echo ../../../binutils-gdb/opcodes/po/ro | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/ro.po file=`echo ../../../binutils-gdb/opcodes/po/sv | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/sv.po file=`echo ../../../binutils-gdb/opcodes/po/tr | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/tr.po file=`echo ../../../binutils-gdb/opcodes/po/uk | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/uk.po file=`echo ../../../binutils-gdb/opcodes/po/vi | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/vi.po file=`echo ../../../binutils-gdb/opcodes/po/zh_CN | sed 's,.*/,,'`.gmo \ && rm -f $file && PATH=../src:$PATH : -o $file ../../../binutils-gdb/opcodes/po/zh_CN.po make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes/po' make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/opcodes' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/etc' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/etc' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/intl' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/intl' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libdecnumber' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libdecnumber' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty' make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty/testsuite' ./test-demangle < ../../../binutils-gdb/libiberty/testsuite/demangle-expected ./test-demangle: 898 tests, 0 failures ./test-demangle < ../../../binutils-gdb/libiberty/testsuite/d-demangle-expected ./test-demangle: 266 tests, 0 failures ./test-pexecute ./test-expandargv PASS: test-expandargv-0. PASS: test-expandargv-1. PASS: test-expandargv-2. PASS: test-expandargv-3. PASS: test-expandargv-4. PASS: test-expandargv-5. PASS: test-expandargv-6. ./test-strtol PASS: test-strtol-0. PASS: test-strtol-1. PASS: test-strtol-2. PASS: test-strtol-3. PASS: test-strtol-4. PASS: test-strtol-5. PASS: test-strtol-6. PASS: test-strtol-7. PASS: test-strtol-8. PASS: test-strtol-9. PASS: test-strtol-10. PASS: test-strtol-11. PASS: test-strtol-12. PASS: test-strtol-13. PASS: test-strtol-14. PASS: test-strtol-15. PASS: test-strtol-16. PASS: test-strtol-17. PASS: test-strtol-18. PASS: test-strtol-19. PASS: test-strtol-20. PASS: test-strtol-21. PASS: test-strtol-22. PASS: test-strtol-23. make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty/testsuite' make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/libiberty' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/readline' make[2]: Nothing to be done for 'check'. make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/readline' make[2]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb' make[3]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite' Nothing to be done for all... make check-single make[4]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite' rootme=`pwd`; export rootme; srcdir=../../../binutils-gdb/gdb/testsuite ; export srcdir ; EXPECT=`if [ "${READ1}" != "" ] ; then echo ${rootme}/expect-read1; elif [ -f ${rootme}/../../expect/expect ] ; then echo ${rootme}/../../expect/expect ; else echo expect ; fi` ; export EXPECT ; EXEEXT= ; export EXEEXT ; LD_LIBRARY_PATH=$rootme/../../expect:$rootme/../../libstdc++:$rootme/../../tk/unix:$rootme/../../tcl/unix:$rootme/../../bfd:$rootme/../../opcodes:$LD_LIBRARY_PATH; export LD_LIBRARY_PATH; if [ -f ${rootme}/../../expect/expect ] ; then TCL_LIBRARY=${srcdir}/../../tcl/library ; export TCL_LIBRARY ; fi ; runtest gdb.mi/mi-watch.exp Test Run By buildbot on Mon Jul 20 14:07:00 2015 Native configuration is mips64-unknown-linux-gnu === gdb tests === Schedule of variations: unix Running target unix Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target. Using /usr/share/dejagnu/config/unix.exp as generic interface file for target. Using ../../../binutils-gdb/gdb/testsuite/config/unix.exp as tool-and-target-specific interface file. Running ../../../binutils-gdb/gdb/testsuite/gdb.mi/mi-watch.exp ... XPASS: gdb.mi/mi-watch.exp: sw: watchpoint trigger === gdb Summary === # of expected passes 13 # of unexpected successes 1 /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb version 7.10.50.20150720-cvs -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory Makefile:196: recipe for target 'check-single' failed make[4]: *** [check-single] Error 1 make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite' Makefile:155: recipe for target 'check' failed make[3]: *** [check] Error 2 make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite' Makefile:1144: recipe for target 'check' failed make[2]: *** [check] Error 2 make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb' Makefile:8772: recipe for target 'check-gdb' failed make[1]: *** [check-gdb] Error 2 make[1]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build' Makefile:2198: recipe for target 'do-check' failed make: *** [do-check] Error 2 [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #4: gdb.mi-mi-watch.exp.log --] [-- Type: text/x-log; name="gdb.mi-mi-watch.exp.log", Size: 20569 bytes --] Test Run By buildbot on Mon Jul 20 14:07:00 2015 Native configuration is mips64-unknown-linux-gnu === gdb tests === Schedule of variations: unix Running target unix Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target. Using /usr/share/dejagnu/config/unix.exp as generic interface file for target. Using ../../../binutils-gdb/gdb/testsuite/config/unix.exp as tool-and-target-specific interface file. Running ../../../binutils-gdb/gdb/testsuite/gdb.mi/mi-watch.exp ... spawn /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory -i=mi =thread-group-added,id="i1" ~"GNU gdb (GDB) 7.10.50.20150720-cvs\n" ~"Copyright (C) 2015 Free Software Foundation, Inc.\n" ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law. Type \"show copying\"\nand \"show warranty\" for details.\n" ~"This GDB was configured as \"mips64-unknown-linux-gnu\".\nType \"show configuration\" for configuration details." ~"\nFor bug reporting instructions, please see:\n" ~"<http://www.gnu.org/software/gdb/bugs/>.\n" ~"Find the GDB manual and other documentation resources online at:\n<http://www.gnu.org/software/gdb/documentation/>.\n" ~"For help, type \"help\".\n" ~"Type \"apropos word\" to search for commands related to \"word\".\n" (gdb) 100-gdb-set height 0 100^done (gdb) 101-gdb-set width 0 101^done (gdb) show mi-async &"show mi-async\n" ~"Whether MI is in asynchronous mode is off.\n" ^done (gdb) Executing on host: gcc ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c -g -lm -o /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/gdb.mi/mi-watch (timeout = 300) spawn gcc ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c -g -lm -o /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/gdb.mi/mi-watch Expecting: ^(567-gdb-set can-use-hw-watchpoints 0[ ]+)?(567\^done[ ]+[(]gdb[)] [ ]*) 567-gdb-set can-use-hw-watchpoints 0 567^done (gdb) PASS: gdb.mi/mi-watch.exp: hw watchpoints toggle (1) 102-break-delete 102^done (gdb) 103-break-list 103^done,BreakpointTable={nr_rows="0",nr_cols="6",hdr=[{width="7",alignment="-1",col_name="number",colhdr="Num"},{width="14",alignment="-1",col_name="type",colhdr="Type"},{width="4",alignment="-1",col_name="disp",colhdr="Disp"},{width="3",alignment="-1",col_name="enabled",colhdr="Enb"},{width="10",alignment="-1",col_name="addr",colhdr="Address"},{width="40",alignment="2",col_name="what",colhdr="What"}],body=[]} (gdb) 104-environment-directory -r 104^done,source-path="$cdir:$cwd" (gdb) 105-environment-directory ../../../binutils-gdb/gdb/testsuite/gdb.mi 105^done,source-path="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.mi:$cdir:$cwd" (gdb) 105-file-exec-and-symbols /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/gdb.mi/mi-watch 105^done (gdb) Expecting: ^(200-break-insert -t callee4[ ]+)?(200\^done,bkpt={number=".*",type="breakpoint",disp="del",enabled=".*",addr=".*",func="callee4(\(.*\))?",file=".*",fullname=".*",line=".*",thread-groups=\[.*\],times=".*".*original-location=".*"}[ ]+[(]gdb[)] [ ]*) 200-break-insert -t callee4 200^done,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x004006ec",func="callee4",file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25",thread-groups=["i1"],times="0",original-location="callee4"} (gdb) PASS: gdb.mi/mi-watch.exp: sw: breakpoint at callee4 220-exec-run =thread-group-started,id="i1",pid="2202" =thread-created,id="1",group-id="i1" =library-loaded,id="/lib/ld.so.1",target-name="/lib/ld.so.1",host-name="/lib/ld.so.1",symbols-loaded="0",thread-group="i1" 220^running *running,thread-id="all" (gdb) mi_expect_stop: expecting: \*stopped,reason="breakpoint-hit",disp="del",bkptno="[0-9]+",frame={addr="0x[0-9A-Fa-f]+",func="callee4",args=\[.*\],(?:file="[^ ]*.*",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*",line="[0-9]+"|from=".*")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ =library-loaded,id="/lib/mips-linux-gnu/libm.so.6",target-name="/lib/mips-linux-gnu/libm.so.6",host-name="/lib/mips-linux-gnu/libm.so.6",symbols-loaded="0",thread-group="i1" =library-loaded,id="/lib/mips-linux-gnu/libc.so.6",target-name="/lib/mips-linux-gnu/libc.so.6",host-name="/lib/mips-linux-gnu/libc.so.6",symbols-loaded="0",thread-group="i1" =breakpoint-modified,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x004006ec",func="callee4",file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25",thread-groups=["i1"],times="1",original-location="callee4"} ~"\nTemporary breakpoint " ~"1, callee4 () at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:25\n" ~"25\t int A=1;\n" *stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x004006ec",func="callee4",args=[],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="1" (gdb) PASS: gdb.mi/mi-watch.exp: sw: mi runto callee4 Expecting: ^(111-break-watch C[ ]+)?(111\^done,wpt={number="2",exp="C"}[ ]+[(]gdb[)] [ ]*) 111-break-watch C 111^done,wpt={number="2",exp="C"} (gdb) PASS: gdb.mi/mi-watch.exp: sw: break-watch operation Expecting: ^(222-break-list[ ]+)?(222\^done,BreakpointTable={nr_rows=".",nr_cols=".",hdr=\[{width=".*",alignment=".*",col_name="number",colhdr="Num"}.*colhdr="Type".*colhdr="Disp".*colhdr="Enb".*colhdr="Address".*colhdr="What".*\],body=\[bkpt={number="2",type=".*watchpoint",disp="keep",enabled="y",what="C",thread-groups=\["i1"\],times="0",original-location="C"}\]}[ ]+[(]gdb[)] [ ]*) 222-break-list 222^done,BreakpointTable={nr_rows="1",nr_cols="6",hdr=[{width="7",alignment="-1",col_name="number",colhdr="Num"},{width="14",alignment="-1",col_name="type",colhdr="Type"},{width="4",alignment="-1",col_name="disp",colhdr="Disp"},{width="3",alignment="-1",col_name="enabled",colhdr="Enb"},{width="10",alignment="-1",col_name="addr",colhdr="Address"},{width="40",alignment="2",col_name="what",colhdr="What"}],body=[bkpt={number="2",type="watchpoint",disp="keep",enabled="y",what="C",thread-groups=["i1"],times="0",original-location="C"}]} (gdb) PASS: gdb.mi/mi-watch.exp: sw: list of watchpoints -exec-continue ^running *running,thread-id="all" (gdb) =breakpoint-modified,bkpt={number="2",type="watchpoint",disp="keep",enabled="y",what="C",thread-groups=["i1"],times="1",original-location="C"} ~"Watchpoint 2: C\n" mi_expect_stop: expecting: \*stopped,reason="watchpoint-trigger",wpt={number="2",exp="C"},value={old=".*",new="3"},frame={addr="0x[0-9A-Fa-f]+",func="callee4",args=\[\],(?:file="[^ ]*.*basics.c",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*basics.c",line="30"|from=".*basics.c")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ ~"\nOld value = " ~"-163754450\nNew value = " ~"3\n" ~"callee4 () at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:30\n" ~"30\t return 0;\n" *stopped,reason="watchpoint-trigger",wpt={number="2",exp="C"},value={old="-163754450",new="3"},frame={addr="0x0040070c",func="callee4",args=[],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="30"},thread-id="1",stopped-threads="all",core="0" (gdb) PASS: gdb.mi/mi-watch.exp: sw: watchpoint trigger -exec-continue ^running *running,thread-id="all" (gdb) mi_expect_stop: expecting: \*stopped,reason="watchpoint-scope",wpnum="2",frame={addr="0x[0-9A-Fa-f]+",func="callee3",args=\[.*\],(?:file="[^ ]*.*basics.c",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*basics.c",line="35"|from=".*basics.c")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ =breakpoint-modified,bkpt={number="2",type="watchpoint",disp="dstp",enabled="y",what="C",thread-groups=["i1"],times="2",original-location="C"} ~"callee3 (strarg=0x4009f0 \"A string argument.\") at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" *stopped,reason="watchpoint-scope",wpnum="2",frame={addr="0x00400740",func="callee3",args=[{name="strarg",value="0x4009f0 \"A string argument.\""}],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="35"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="2" (gdb) XPASS: gdb.mi/mi-watch.exp: sw: watchpoint trigger spawn /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory -i=mi =thread-group-added,id="i1" ~"GNU gdb (GDB) 7.10.50.20150720-cvs\n" ~"Copyright (C) 2015 Free Software Foundation, Inc.\n" ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law. Type \"show copying\"\nand \"show warranty\" for details.\n" ~"This GDB was configured as \"mips64-unknown-linux-gnu\".\nType \"show configuration\" for configuration details." ~"\nFor bug reporting instructions, please see:\n" ~"<http://www.gnu.org/software/gdb/bugs/>.\n" ~"Find the GDB manual and other documentation resources online at:\n<http://www.gnu.org/software/gdb/documentation/>.\n" ~"For help, type \"help\".\n" ~"Type \"apropos word\" to search for commands related to \"word\".\n" (gdb) 100-gdb-set height 0 100^done (gdb) 101-gdb-set width 0 101^done (gdb) show mi-async &"show mi-async\n" ~"Whether MI is in asynchronous mode is off.\n" ^done (gdb) Expecting: ^(890-gdb-set can-use-hw-watchpoints 1[ ]+)?(890\^done[ ]+[(]gdb[)] [ ]*) 890-gdb-set can-use-hw-watchpoints 1 890^done (gdb) PASS: gdb.mi/mi-watch.exp: hw watchpoints toggle (2) 102-break-delete 102^done (gdb) 103-break-list 103^done,BreakpointTable={nr_rows="0",nr_cols="6",hdr=[{width="7",alignment="-1",col_name="number",colhdr="Num"},{width="14",alignment="-1",col_name="type",colhdr="Type"},{width="4",alignment="-1",col_name="disp",colhdr="Disp"},{width="3",alignment="-1",col_name="enabled",colhdr="Enb"},{width="10",alignment="-1",col_name="addr",colhdr="Address"},{width="40",alignment="2",col_name="what",colhdr="What"}],body=[]} (gdb) 104-environment-directory -r 104^done,source-path="$cdir:$cwd" (gdb) 105-environment-directory ../../../binutils-gdb/gdb/testsuite/gdb.mi 105^done,source-path="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../../binutils-gdb/gdb/testsuite/gdb.mi:$cdir:$cwd" (gdb) 105-file-exec-and-symbols /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/gdb.mi/mi-watch 105^done (gdb) Expecting: ^(200-break-insert -t callee4[ ]+)?(200\^done,bkpt={number=".*",type="breakpoint",disp="del",enabled=".*",addr=".*",func="callee4(\(.*\))?",file=".*",fullname=".*",line=".*",thread-groups=\[.*\],times=".*".*original-location=".*"}[ ]+[(]gdb[)] [ ]*) 200-break-insert -t callee4 200^done,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x004006ec",func="callee4",file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25",thread-groups=["i1"],times="0",original-location="callee4"} (gdb) PASS: gdb.mi/mi-watch.exp: hw: breakpoint at callee4 220-exec-run =thread-group-started,id="i1",pid="2215" =thread-created,id="1",group-id="i1" =library-loaded,id="/lib/ld.so.1",target-name="/lib/ld.so.1",host-name="/lib/ld.so.1",symbols-loaded="0",thread-group="i1" 220^running *running,thread-id="all" (gdb) mi_expect_stop: expecting: \*stopped,reason="breakpoint-hit",disp="del",bkptno="[0-9]+",frame={addr="0x[0-9A-Fa-f]+",func="callee4",args=\[.*\],(?:file="[^ ]*.*",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*",line="[0-9]+"|from=".*")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ =library-loaded,id="/lib/mips-linux-gnu/libm.so.6",target-name="/lib/mips-linux-gnu/libm.so.6",host-name="/lib/mips-linux-gnu/libm.so.6",symbols-loaded="0",thread-group="i1" =library-loaded,id="/lib/mips-linux-gnu/libc.so.6",target-name="/lib/mips-linux-gnu/libc.so.6",host-name="/lib/mips-linux-gnu/libc.so.6",symbols-loaded="0",thread-group="i1" =breakpoint-modified,bkpt={number="1",type="breakpoint",disp="del",enabled="y",addr="0x004006ec",func="callee4",file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25",thread-groups=["i1"],times="1",original-location="callee4"} ~"\nTemporary breakpoint " ~"1, callee4 () at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:25\n" ~"25\t int A=1;\n" *stopped,reason="breakpoint-hit",disp="del",bkptno="1",frame={addr="0x004006ec",func="callee4",args=[],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="25"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="1" (gdb) PASS: gdb.mi/mi-watch.exp: hw: mi runto callee4 Expecting: ^(111-break-watch C[ ]+)?(111\^done,wpt={number="2",exp="C"}[ ]+[(]gdb[)] [ ]*) 111-break-watch C 111^done,wpt={number="2",exp="C"} (gdb) PASS: gdb.mi/mi-watch.exp: hw: break-watch operation Expecting: ^(222-break-list[ ]+)?(222\^done,BreakpointTable={nr_rows=".",nr_cols=".",hdr=\[{width=".*",alignment=".*",col_name="number",colhdr="Num"}.*colhdr="Type".*colhdr="Disp".*colhdr="Enb".*colhdr="Address".*colhdr="What".*\],body=\[bkpt={number="2",type=".*watchpoint",disp="keep",enabled="y",what="C",thread-groups=\["i1"\],times="0",original-location="C"}\]}[ ]+[(]gdb[)] [ ]*) 222-break-list 222^done,BreakpointTable={nr_rows="1",nr_cols="6",hdr=[{width="7",alignment="-1",col_name="number",colhdr="Num"},{width="14",alignment="-1",col_name="type",colhdr="Type"},{width="4",alignment="-1",col_name="disp",colhdr="Disp"},{width="3",alignment="-1",col_name="enabled",colhdr="Enb"},{width="10",alignment="-1",col_name="addr",colhdr="Address"},{width="40",alignment="2",col_name="what",colhdr="What"}],body=[bkpt={number="2",type="hw watchpoint",disp="keep",enabled="y",what="C",thread-groups=["i1"],times="0",original-location="C"}]} (gdb) PASS: gdb.mi/mi-watch.exp: hw: list of watchpoints -exec-continue ^running *running,thread-id="all" (gdb) =breakpoint-modified,bkpt={number="2",type="hw watchpoint",disp="keep",enabled="y",what="C",thread-groups=["i1"],times="1",original-location="C"} ~"Hardware watchpoint 2: C\n" ~"\nOld value = " ~"-163754450\nNew value = " ~"3\n" ~"callee4 () at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:30\n" ~"30\t return 0;\n" *stopped,reason="watchpoint-trigger",wpt={number="2",exp="C"},value={old="-163754450",new="3"},frame={addr="0x0040070c",func="callee4",args=[],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="30"},thread-id="1",stopped-threads="all",core="0" (gdb) mi_expect_stop: expecting: \*stopped,reason="watchpoint-trigger",wpt={number="2",exp="C"},value={old=".*",new="3"},frame={addr="0x[0-9A-Fa-f]+",func="callee4",args=\[\],(?:file="[^ ]*.*basics.c",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*basics.c",line="30"|from=".*basics.c")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ PASS: gdb.mi/mi-watch.exp: hw: watchpoint trigger -exec-continue ^running *running,thread-id="all" (gdb) =breakpoint-modified,bkpt={number="2",type="hw watchpoint",disp="dstp",enabled="y",what="C",thread-groups=["i1"],times="2",original-location="C"} mi_expect_stop: expecting: \*stopped,reason="watchpoint-scope",wpnum="2",frame={addr="0x[0-9A-Fa-f]+",func="callee3",args=\[.*\],(?:file="[^ ]*.*basics.c",fullname="(/[^\n]*/|\\\\[^\\]+\\[^\n]+\\|\\[^\\][^\n]*\\|[a-zA-Z]:[^\n]*\\).*basics.c",line="35"|from=".*basics.c")},thread-id="[0-9]+",stopped-threads=[^ ]* (=thread-selected,id="[0-9]+" |=(?:breakpoint-created|breakpoint-deleted)[^ ]+" )*[(]gdb[)] $ ~"callee3 (strarg=0x4009f0 \"A string argument.\") at ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c:35\n" ~"35\t}\n" *stopped,reason="watchpoint-scope",wpnum="2",frame={addr="0x00400740",func="callee3",args=[{name="strarg",value="0x4009f0 \"A string argument.\""}],file="../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c",fullname="/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/binutils-gdb/gdb/testsuite/gdb.mi/basics.c",line="35"},thread-id="1",stopped-threads="all",core="0" =breakpoint-deleted,id="2" (gdb) PASS: gdb.mi/mi-watch.exp: hw: watchpoint trigger testcase ../../../binutils-gdb/gdb/testsuite/gdb.mi/mi-watch.exp completed in 4 seconds === gdb Summary === # of expected passes 13 # of unexpected successes 1 Executing on host: /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory --version (timeout = 300) spawn /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory --version GNU gdb (GDB) 7.10.50.20150720-cvs Copyright (C) 2015 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "mips64-unknown-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word". /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../../gdb/gdb version 7.10.50.20150720-cvs -nw -nx -data-directory /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/../data-directory runtest completed at Mon Jul 20 14:07:05 2015 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-20 21:24 ` Brendan Kirby @ 2015-07-20 21:31 ` Simon Marchi 0 siblings, 0 replies; 17+ messages in thread From: Simon Marchi @ 2015-07-20 21:31 UTC (permalink / raw) To: Brendan Kirby, gdb-patches On 15-07-20 05:24 PM, Brendan Kirby wrote: > When I rebuilt this morning, I was running as the same user as the > Buildbot uses. Also, I had SHELL set to /bin/bash. I've just re-run > the build with SHELL explicitly set on the make command like: > make -j1 all SHELL=/bin/bash > make check RUNTESTFLAGS='gdb.mi/mi-watch.exp' SHELL=/bin/bash > > I'm not seeing the messages: > > Cannot exec $execfile -c exec $execfile > > in any of the logs ("grep -i 'cannot.*exec' *" returns nothing). I'm > attaching the build log from the above "make -j1 all SHELL=/bin/bash" > command above as build.log as well as the newer versions of the make > check and gdb.log logs. > > Brendan Those logs seems fine. Try to run what Sergio suggested, which is a bit closer to what the buildbot really runs. Thanks, Simon ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-20 20:04 ` Brendan Kirby 2015-07-20 20:45 ` Simon Marchi @ 2015-07-20 21:05 ` Sergio Durigan Junior [not found] ` <55AD8A7F.3080009@imgtec.com> 1 sibling, 1 reply; 17+ messages in thread From: Sergio Durigan Junior @ 2015-07-20 21:05 UTC (permalink / raw) To: Brendan Kirby; +Cc: Simon Marchi, gdb-patches On Monday, July 20 2015, Brendan Kirby wrote: > On 07/18/2015 07:30 PM, Sergio Durigan Junior wrote: >> On Saturday, July 18 2015, Brendan Kirby wrote: >> >> Hi Brendan, >> >>> If I'm reading this right, it looks like it's trying to exec a file that >>> doesn't exist. I think it's trying to exec: >>> /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch >> This file should exist, because it was correctly compiled before during >> the testcase run: >> >> Executing on host: gcc >> ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c -g -lm -o >> /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch >> (timeout = 300) >> spawn gcc ../../../binutils-gdb/gdb/testsuite/gdb.mi/basics.c -g -lm >> -o >> /mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/testsuite/outputs/gdb.mi/mi-watch/mi-watch > I ran the steps below. The build was successful. I built with commit > 7ac018954bd9 because the latest one was failing to build. However, I'm > still not seeing this file. I've attached the output of running "make > check RUNTESTFLAGS='gdb.mi/mi-watch.exp'" in the file > gdb.mi-mi-watch.exp.out and I've attached the gdb/testsuite/gdb.log file > in gdb.mi-mi-watch.exp.log. Let me know if you want me to try > anything else. Sorry, my bad. The outputs/ directory will only be created/used when you set the FORCE_PARALLEL=1 variable. Could you please try running the same command that the BuildBot runs? make -k check -j1 FORCE_PARALLEL=1 And seeing if there's anything strange happening? Thanks, -- Sergio GPG key ID: 237A 54B1 0287 28BF 00EF 31F4 D0EB 7628 65FC 5E36 Please send encrypted e-mail if possible http://sergiodj.net/ ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <55AD8A7F.3080009@imgtec.com>]
* Re: MIPS build slave [not found] ` <55AD8A7F.3080009@imgtec.com> @ 2015-07-21 0:14 ` Sergio Durigan Junior 2015-07-21 1:50 ` Brendan Kirby 0 siblings, 1 reply; 17+ messages in thread From: Sergio Durigan Junior @ 2015-07-21 0:14 UTC (permalink / raw) To: Brendan Kirby; +Cc: Simon Marchi, gdb-patches On Monday, July 20 2015, Brendan Kirby wrote: > When I run it manually, it generates no output and it exits with 0. I'm > not sure what it's supposed to do, but if it's a test, I'm guessing the > test passed. Maybe it isn't passing in the Buildbot because of the > SHELL environment variable being set wrong like Simon suggested? I've > fixed the systemd service file to set the SHELL environment variable to > /bin/bash before starting the Buildbot slave. So, that problem should > be resolved now. Yeah, I think Simon hit the nail about the problem: if $SHELL is nologin GDB will get confused about things. In this case, the easier solution is to use /bin/{,ba}sh as the buildslave user's shell. Can you do that? You can still edit you /etc/ssh/sshd_config and disallow the buildslave there. Thanks, -- Sergio GPG key ID: 237A 54B1 0287 28BF 00EF 31F4 D0EB 7628 65FC 5E36 Please send encrypted e-mail if possible http://sergiodj.net/ ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-21 0:14 ` Sergio Durigan Junior @ 2015-07-21 1:50 ` Brendan Kirby 2015-07-21 4:34 ` Sergio Durigan Junior 0 siblings, 1 reply; 17+ messages in thread From: Brendan Kirby @ 2015-07-21 1:50 UTC (permalink / raw) To: Sergio Durigan Junior; +Cc: Simon Marchi, gdb-patches On 07/20/2015 05:14 PM, Sergio Durigan Junior wrote: > On Monday, July 20 2015, Brendan Kirby wrote: > >> When I run it manually, it generates no output and it exits with 0. I'm >> not sure what it's supposed to do, but if it's a test, I'm guessing the >> test passed. Maybe it isn't passing in the Buildbot because of the >> SHELL environment variable being set wrong like Simon suggested? I've >> fixed the systemd service file to set the SHELL environment variable to >> /bin/bash before starting the Buildbot slave. So, that problem should >> be resolved now. > Yeah, I think Simon hit the nail about the problem: if $SHELL is nologin > GDB will get confused about things. In this case, the easier solution > is to use /bin/{,ba}sh as the buildslave user's shell. Can you do that? > You can still edit you /etc/ssh/sshd_config and disallow the buildslave > there. > As I mentioned before, I've already made this change and restarted the build slave. I'm seeing SHELL=/bin/bash in the environment for steps in the currently running build. Let me know if this fixes things. Brendan ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-21 1:50 ` Brendan Kirby @ 2015-07-21 4:34 ` Sergio Durigan Junior 2015-07-21 14:57 ` Simon Marchi 0 siblings, 1 reply; 17+ messages in thread From: Sergio Durigan Junior @ 2015-07-21 4:34 UTC (permalink / raw) To: Brendan Kirby; +Cc: Simon Marchi, gdb-patches On Monday, July 20 2015, Brendan Kirby wrote: >> Yeah, I think Simon hit the nail about the problem: if $SHELL is nologin >> GDB will get confused about things. In this case, the easier solution >> is to use /bin/{,ba}sh as the buildslave user's shell. Can you do that? >> You can still edit you /etc/ssh/sshd_config and disallow the buildslave >> there. >> > As I mentioned before, I've already made this change and restarted the > build slave. I'm seeing SHELL=/bin/bash in the environment for steps in > the currently running build. Let me know if this fixes things. Sorry, I missed that message. Anyway, now the build is broken for MIPS, so it's not reaching the testscase part. Let's wait until it gets fixed. Cheers, -- Sergio GPG key ID: 237A 54B1 0287 28BF 00EF 31F4 D0EB 7628 65FC 5E36 Please send encrypted e-mail if possible http://sergiodj.net/ ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-21 4:34 ` Sergio Durigan Junior @ 2015-07-21 14:57 ` Simon Marchi 2015-07-21 16:38 ` Brendan Kirby 0 siblings, 1 reply; 17+ messages in thread From: Simon Marchi @ 2015-07-21 14:57 UTC (permalink / raw) To: Sergio Durigan Junior, Brendan Kirby; +Cc: Simon Marchi, gdb-patches On 15-07-21 12:34 AM, Sergio Durigan Junior wrote: > Sorry, I missed that message. Anyway, now the build is broken for MIPS, > so it's not reaching the testscase part. Let's wait until it gets > fixed. > > Cheers, Woohoo, look at that: -# of expected passes 7837 -# of unexpected failures 4664 -# of expected failures 47 -# of known failures 16 -# of untested testcases 89 -# of unresolved testcases 150 -# of unsupported tests 194 +# of expected passes 25909 +# of unexpected failures 355 +# of unexpected successes 1 +# of expected failures 54 +# of known failures 55 +# of untested testcases 51 +# of unresolved testcases 36 +# of unsupported tests 215 http://gdb-build.sergiodj.net/cgit/Debian-MIPS-m64/.git/commit/?id=198f8a337b4b8095a73a9d7f4be77efb99c0a110 So, was it only the shell change, or was there anything else? ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-21 14:57 ` Simon Marchi @ 2015-07-21 16:38 ` Brendan Kirby 2015-07-21 16:42 ` Simon Marchi 0 siblings, 1 reply; 17+ messages in thread From: Brendan Kirby @ 2015-07-21 16:38 UTC (permalink / raw) To: Simon Marchi, Sergio Durigan Junior; +Cc: Simon Marchi, gdb-patches On 07/21/2015 07:57 AM, Simon Marchi wrote: > On 15-07-21 12:34 AM, Sergio Durigan Junior wrote: >> Sorry, I missed that message. Anyway, now the build is broken for MIPS, >> so it's not reaching the testscase part. Let's wait until it gets >> fixed. >> >> Cheers, > Woohoo, look at that: > > -# of expected passes 7837 > -# of unexpected failures 4664 > -# of expected failures 47 > -# of known failures 16 > -# of untested testcases 89 > -# of unresolved testcases 150 > -# of unsupported tests 194 > > +# of expected passes 25909 > +# of unexpected failures 355 > +# of unexpected successes 1 > +# of expected failures 54 > +# of known failures 55 > +# of untested testcases 51 > +# of unresolved testcases 36 > +# of unsupported tests 215 > > http://gdb-build.sergiodj.net/cgit/Debian-MIPS-m64/.git/commit/?id=198f8a337b4b8095a73a9d7f4be77efb99c0a110 > > So, was it only the shell change, or was there anything else? All I changed was SHELL is now set to /bin/bash. It might be good to note that when setting up new Buildbot slaves. Brendan ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-21 16:38 ` Brendan Kirby @ 2015-07-21 16:42 ` Simon Marchi 2015-07-21 17:21 ` Brendan Kirby 0 siblings, 1 reply; 17+ messages in thread From: Simon Marchi @ 2015-07-21 16:42 UTC (permalink / raw) To: Brendan Kirby, Sergio Durigan Junior; +Cc: Simon Marchi, gdb-patches On 15-07-21 12:38 PM, Brendan Kirby wrote: > All I changed was SHELL is now set to /bin/bash. It might be good to > note that when setting up new Buildbot slaves. > > Brendan Did you have to change the default shell for the user (in /etc/passwd) or did you simply override the SHELL variable at some point when launching the slave? ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-21 16:42 ` Simon Marchi @ 2015-07-21 17:21 ` Brendan Kirby 2015-07-21 17:43 ` Simon Marchi 0 siblings, 1 reply; 17+ messages in thread From: Brendan Kirby @ 2015-07-21 17:21 UTC (permalink / raw) To: Simon Marchi, Sergio Durigan Junior; +Cc: Simon Marchi, gdb-patches On 07/21/2015 09:42 AM, Simon Marchi wrote: > On 15-07-21 12:38 PM, Brendan Kirby wrote: >> All I changed was SHELL is now set to /bin/bash. It might be good to >> note that when setting up new Buildbot slaves. >> >> Brendan > Did you have to change the default shell for the user (in /etc/passwd) or > did you simply override the SHELL variable at some point when launching the > slave? I overrode the SHELL variable in the Buildbot systemd service I wrote to start it. Brendan ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-21 17:21 ` Brendan Kirby @ 2015-07-21 17:43 ` Simon Marchi 2015-07-23 11:20 ` Pedro Alves 0 siblings, 1 reply; 17+ messages in thread From: Simon Marchi @ 2015-07-21 17:43 UTC (permalink / raw) To: Brendan Kirby, Sergio Durigan Junior; +Cc: Simon Marchi, gdb-patches On 15-07-21 01:21 PM, Brendan Kirby wrote: > I overrode the SHELL variable in the Buildbot systemd service I wrote to > start it. > > Brendan Ok thanks, I added a little warning in the wiki: /!\ It has been reported that the tests won't run properly if the SHELL variable is not set to a valid shell (e.g. /sbin/nologin instead of /bin/bash). Make sure that the user running the buildslave has a valid shell or override the SHELL environment variable somehow. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: MIPS build slave 2015-07-21 17:43 ` Simon Marchi @ 2015-07-23 11:20 ` Pedro Alves 0 siblings, 0 replies; 17+ messages in thread From: Pedro Alves @ 2015-07-23 11:20 UTC (permalink / raw) To: Simon Marchi, Brendan Kirby, Sergio Durigan Junior Cc: Simon Marchi, gdb-patches On 07/21/2015 06:43 PM, Simon Marchi wrote: > On 15-07-21 01:21 PM, Brendan Kirby wrote: >> I overrode the SHELL variable in the Buildbot systemd service I wrote to >> start it. >> >> Brendan > > Ok thanks, I added a little warning in the wiki: > > > /!\ It has been reported that the tests won't run properly if the SHELL variable is not > set to a valid shell (e.g. /sbin/nologin instead of /bin/bash). Make sure that the > user running the buildslave has a valid shell or override the SHELL environment > variable somehow. You always need a valid SHELL set. Not just for the testsuite, but for gdb itself: gdb starts programs with the shell for argument globbing, variable expansion ("run *", "run $foo", etc), and redirection ("run 1>foo.txt", etc.), unless you disable all that with "set startup-with-shell off". $ SHELL=/foo gdb /usr/bin/sleep ... (gdb) r Starting program: /usr/bin/sleep Cannot exec /usr/bin/sleep -c exec /usr/bin/sleep . Error: No such file or directory During startup program exited with code 127. (gdb) As you found, that's a bogus error message. It should have been: (gdb) r Starting program: /usr/bin/sleep Cannot exec /foo -c exec /usr/bin/sleep . Error: No such file or directory During startup program exited with code 127. (gdb) This patchlet fixes that: From 767ecf74811b010c47a0721306beae1979141c61 Mon Sep 17 00:00:00 2001 From: Pedro Alves <palves@redhat.com> Date: Thu, 23 Jul 2015 12:10:18 +0100 Subject: [PATCH] fix exec error message --- gdb/fork-child.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/gdb/fork-child.c b/gdb/fork-child.c index 66c07fb..4ba62b0 100644 --- a/gdb/fork-child.c +++ b/gdb/fork-child.c @@ -365,7 +365,7 @@ fork_inferior (char *exec_file_arg, char *allargs, char **env, /* If we get here, it's an error. */ save_errno = errno; - fprintf_unfiltered (gdb_stderr, "Cannot exec %s", exec_file); + fprintf_unfiltered (gdb_stderr, "Cannot exec %s", argv[0]); for (i = 1; argv[i] != NULL; i++) fprintf_unfiltered (gdb_stderr, " %s", argv[i]); fprintf_unfiltered (gdb_stderr, ".\n"); -- 1.9.3 ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2015-07-23 11:20 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-18 4:15 MIPS build slave Simon Marchi
2015-07-18 5:28 ` Brendan Kirby
2015-07-19 2:35 ` Sergio Durigan Junior
2015-07-20 20:04 ` Brendan Kirby
2015-07-20 20:45 ` Simon Marchi
2015-07-20 21:24 ` Brendan Kirby
2015-07-20 21:31 ` Simon Marchi
2015-07-20 21:05 ` Sergio Durigan Junior
[not found] ` <55AD8A7F.3080009@imgtec.com>
2015-07-21 0:14 ` Sergio Durigan Junior
2015-07-21 1:50 ` Brendan Kirby
2015-07-21 4:34 ` Sergio Durigan Junior
2015-07-21 14:57 ` Simon Marchi
2015-07-21 16:38 ` Brendan Kirby
2015-07-21 16:42 ` Simon Marchi
2015-07-21 17:21 ` Brendan Kirby
2015-07-21 17:43 ` Simon Marchi
2015-07-23 11:20 ` Pedro Alves
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).