* [PATCH 3/3] Remove HP-UX references fom testsuite
2015-12-19 23:30 [PATCH 1/3] Remove HP-UX reference in testsuite/configure.ac Simon Marchi
@ 2015-12-19 23:31 ` Simon Marchi
2015-12-20 5:08 ` Joel Brobecker
2015-12-21 12:48 ` Pedro Alves
2015-12-20 4:49 ` [PATCH 1/3] Remove HP-UX reference in testsuite/configure.ac Joel Brobecker
1 sibling, 2 replies; 14+ messages in thread
From: Simon Marchi @ 2015-12-19 23:31 UTC (permalink / raw)
To: gdb-patches; +Cc: Simon Marchi
This patch removes all special cases for HP-UX, for which support has
been removed earlier, that I found in the testsuite. Note that the hppa
architecture != HP-UX, since other OSes can run on hppa, so I tried to
leave everything that is not HP-UX specific.
Two complete tests were completely HP-UX specific, so I removed them.
I ran the testsuite on Linux x86-64, native and native-gdbserver, and
noticed no regressions.
gdb/testsuite/ChangeLog:
* gdb.asm/asm-source.exp: Remove HP-UX references.
* gdb.base/annota1.exp: Likewise.
* gdb.base/annota3.exp: Likewise.
* gdb.base/attach.exp: Likewise.
* gdb.base/bigcore.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/call-ar-st.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/catch-fork-static.exp: Likewise.
* gdb.base/display.exp: Likewise.
* gdb.base/foll-exec-mode.exp: Likewise.
* gdb.base/foll-exec.exp: Likewise.
* gdb.base/foll-fork.exp: Likewise.
* gdb.base/foll-vfork.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/inferior-died.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/multi-forks.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/solib1.c: Likewise.
* gdb.base/step-test.exp: Likewise.
* gdb.dwarf2/pr10770.c: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.multi/bkpt-multi-exec.ex: Likewise.p
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/staticthreads.exp: Likewise.
* lib/future.exp: Likewise.
* lib/gdb.exp: Likewise.
* gdb.base/so-indr-cl.c: Remove.
* gdb.base/so-indr-cl.exp: Likewise.
* gdb.base/solib.c: Likewise.
* gdb.base/solib.exp: Likewise.
* gdb.base/solib2.c: Likewise.
---
gdb/testsuite/gdb.asm/asm-source.exp | 4 -
gdb/testsuite/gdb.base/annota1.exp | 10 -
gdb/testsuite/gdb.base/annota3.exp | 11 -
gdb/testsuite/gdb.base/attach.exp | 12 -
gdb/testsuite/gdb.base/bigcore.exp | 1 -
gdb/testsuite/gdb.base/break.exp | 77 +-----
gdb/testsuite/gdb.base/call-ar-st.exp | 58 ++---
gdb/testsuite/gdb.base/callfuncs.exp | 3 -
gdb/testsuite/gdb.base/catch-fork-static.exp | 3 +-
gdb/testsuite/gdb.base/display.exp | 12 +-
gdb/testsuite/gdb.base/foll-exec-mode.exp | 2 +-
gdb/testsuite/gdb.base/foll-exec.exp | 6 +-
gdb/testsuite/gdb.base/foll-fork.exp | 3 +-
gdb/testsuite/gdb.base/foll-vfork.exp | 60 +----
gdb/testsuite/gdb.base/funcargs.exp | 7 -
gdb/testsuite/gdb.base/hbreak2.exp | 18 +-
gdb/testsuite/gdb.base/inferior-died.exp | 2 +-
gdb/testsuite/gdb.base/interrupt.exp | 9 -
gdb/testsuite/gdb.base/multi-forks.exp | 8 +-
gdb/testsuite/gdb.base/nodebug.exp | 55 +----
gdb/testsuite/gdb.base/sepdebug.exp | 55 +----
gdb/testsuite/gdb.base/so-indr-cl.c | 22 --
gdb/testsuite/gdb.base/so-indr-cl.exp | 129 ----------
gdb/testsuite/gdb.base/solib.c | 60 -----
gdb/testsuite/gdb.base/solib.exp | 352 ---------------------------
gdb/testsuite/gdb.base/solib1.c | 4 -
gdb/testsuite/gdb.base/solib2.c | 14 --
gdb/testsuite/gdb.base/step-test.exp | 4 +-
gdb/testsuite/gdb.dwarf2/pr10770.c | 1 -
gdb/testsuite/gdb.mi/non-stop.c | 15 +-
gdb/testsuite/gdb.mi/pthreads.c | 15 +-
gdb/testsuite/gdb.multi/bkpt-multi-exec.exp | 2 +-
gdb/testsuite/gdb.threads/pthreads.c | 17 +-
gdb/testsuite/gdb.threads/staticthreads.exp | 2 +-
gdb/testsuite/lib/future.exp | 3 -
gdb/testsuite/lib/gdb.exp | 101 +++-----
36 files changed, 110 insertions(+), 1047 deletions(-)
delete mode 100644 gdb/testsuite/gdb.base/so-indr-cl.c
delete mode 100644 gdb/testsuite/gdb.base/so-indr-cl.exp
delete mode 100644 gdb/testsuite/gdb.base/solib.c
delete mode 100644 gdb/testsuite/gdb.base/solib.exp
delete mode 100644 gdb/testsuite/gdb.base/solib2.c
diff --git a/gdb/testsuite/gdb.asm/asm-source.exp b/gdb/testsuite/gdb.asm/asm-source.exp
index bd66c93..7824a98 100644
--- a/gdb/testsuite/gdb.asm/asm-source.exp
+++ b/gdb/testsuite/gdb.asm/asm-source.exp
@@ -159,10 +159,6 @@ switch -glob -- [istarget] {
set asm-arch pa
set debug-flags "-gdwarf-2"
}
- "hppa64-*-hpux*" {
- set asm-arch pa64
- set debug-flags "-gdwarf-2"
- }
"h83*-*" {
set asm-arch h8300
set debug-flags "-gdwarf-2"
diff --git a/gdb/testsuite/gdb.base/annota1.exp b/gdb/testsuite/gdb.base/annota1.exp
index c19b945..2d98720 100644
--- a/gdb/testsuite/gdb.base/annota1.exp
+++ b/gdb/testsuite/gdb.base/annota1.exp
@@ -405,20 +405,10 @@ gdb_test_multiple "info inferior 1" "$test" {
# annotate-signal-string-end
# FIXME: annotate-signal not tested (requires that the inferior be
# stopped by a "random" signal)
-#
-# SIGTRAP signals are dropped before they get to the inferior process
-# on hpux11. In theory, this behaivor can be controlled by setting
-# TTEO_NORM_SIGTRAP in the inferior, but doing so did not cause
-# the signal to be properly delivered.
-#
-# It has been verified that other signals will be delivered. However,
-# rather than twiddle the test, I choose to leave it as-is as it
-# exposes an interesting failure on hpux11.
if [target_info exists gdb,nosignals] {
unsupported "signal sent"
} else {
- setup_xfail hppa*-*-hpux11*
gdb_test_multiple "signal SIGTRAP" "signal sent" {
-re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
pass "signal sent"
diff --git a/gdb/testsuite/gdb.base/annota3.exp b/gdb/testsuite/gdb.base/annota3.exp
index 870a681..c8b5b40 100644
--- a/gdb/testsuite/gdb.base/annota3.exp
+++ b/gdb/testsuite/gdb.base/annota3.exp
@@ -362,22 +362,11 @@ gdb_test_multiple "info inferior 1" "$test" {
}
}
-#
# Send a signal that is not handled
-#
-# SIGTRAP signals are dropped before they get to the inferior process
-# on hpux11. In theory, this behaivor can be controlled by setting
-# TTEO_NORM_SIGTRAP in the inferior, but doing so did not cause
-# the signal to be properly delivered.
-#
-# It has been verified that other signals will be delivered. However,
-# rather than twiddle the test, I choose to leave it as-is as it
-# exposes an interesting failure on hpux11.
if [target_info exists gdb,nosignals] {
unsupported "signal sent"
} else {
- setup_xfail hppa*-*-hpux11*
send_gdb "signal SIGTRAP\n"
gdb_expect_list "signal sent" "$gdb_prompt$" {
"\r\n\032\032post-prompt\r\n"
diff --git a/gdb/testsuite/gdb.base/attach.exp b/gdb/testsuite/gdb.base/attach.exp
index bf0d84e..ab59e2d 100644
--- a/gdb/testsuite/gdb.base/attach.exp
+++ b/gdb/testsuite/gdb.base/attach.exp
@@ -13,18 +13,6 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-# On HP-UX 11.0, this test is causing a process running the program
-# "attach" to be left around spinning. Until we figure out why, I am
-# commenting out the test to avoid polluting tiamat (our 11.0 nightly
-# test machine) with these processes. RT
-#
-# Setting the magic bit in the target app should work. I added a
-# "kill", and also a test for the R3 register warning. JB
-if { [istarget "hppa*-*-hpux*"] } {
- return 0
-}
-
if {![can_spawn_for_attach]} {
return 0
}
diff --git a/gdb/testsuite/gdb.base/bigcore.exp b/gdb/testsuite/gdb.base/bigcore.exp
index 4e407e0..21d96b9 100644
--- a/gdb/testsuite/gdb.base/bigcore.exp
+++ b/gdb/testsuite/gdb.base/bigcore.exp
@@ -31,7 +31,6 @@ if ![isnative] then {
# I/O bandwith.
if { [istarget "*-*-*bsd*"]
- || [istarget "*-*-hpux*"]
|| [istarget "*-*-solaris*"]
|| [istarget "*-*-darwin*"]
|| [istarget "*-*-cygwin*"] } {
diff --git a/gdb/testsuite/gdb.base/break.exp b/gdb/testsuite/gdb.base/break.exp
index 003a73f..6ca910c 100644
--- a/gdb/testsuite/gdb.base/break.exp
+++ b/gdb/testsuite/gdb.base/break.exp
@@ -485,24 +485,13 @@ gdb_test_multiple "catch fork" "$name" {
}
-# If we are on HP-UX 10.20, we expect an error message to be
-# printed if we type "catch vfork" at the gdb gdb_prompt. This is
-# because on HP-UX 10.20, we cannot catch vfork events.
-
set name "set catch vfork, never expected to trigger"
-
-if [istarget "hppa*-hp-hpux10.20"] then {
- gdb_test "catch vfork" \
- "Catch of vfork events not supported on HP-UX 10.20..*" \
- "$name"
-} else {
- gdb_test_multiple "catch vfork" "$name" {
- -re "Catchpoint \[0-9\]* .vfork..*$gdb_prompt $" {
- pass $name
- }
- -re "Catch of vfork not yet implemented.*$gdb_prompt $" {
- pass $name
- }
+gdb_test_multiple "catch vfork" "$name" {
+ -re "Catchpoint \[0-9\]* .vfork..*$gdb_prompt $" {
+ pass $name
+ }
+ -re "Catch of vfork not yet implemented.*$gdb_prompt $" {
+ pass $name
}
}
@@ -641,32 +630,20 @@ gdb_test "break marker2" \
"set breakpoint on to-be-called function"
gdb_test "print marker2(99)" \
- "The program being debugged stopped while in a function called from GDB.\r\nEvaluation of the expression containing the function\r\n.marker2$proto. will be abandoned.\r\nWhen the function is done executing, GDB will silently stop.*" \
+ "The program being debugged stopped while in a function called from GDB.\r\nEvaluation of the expression containing the function\r\n.marker2. will be abandoned.\r\nWhen the function is done executing, GDB will silently stop.*" \
"hit breakpoint on called function"
# As long as we're stopped (breakpointed) in a called function,
# verify that we can successfully backtrace & such from here.
-#
-# In this and the following test, the _sr4export check apparently is needed
-# for hppa*-*-hpux.
-#
-gdb_test_multiple "bt" "backtrace while in called function" {
- -re "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1.*_sr4export.*$gdb_prompt $" {
- pass "backtrace while in called function"
- }
- -re "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1.*function called from gdb.*$gdb_prompt $" {
- pass "backtrace while in called function"
- }
-}
+gdb_test "bt" \
+ "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1\[ \t\]*<function called from gdb>.*" \
+ "backtrace while in called function"
# Return from the called function. For remote targets, it's important to do
# this before runto_main, which otherwise may silently stop on the dummy
# breakpoint inserted by GDB at the program's entry point.
#
gdb_test_multiple "finish" "finish from called function" {
- -re "Run till exit from .*marker2.* at .*$bp_location8\r\n.* in _sr4export.*$gdb_prompt $" {
- pass "finish from called function"
- }
-re "Run till exit from .*marker2.* at .*$bp_location8\r\n.*function called from gdb.*$gdb_prompt $" {
pass "finish from called function"
}
@@ -704,40 +681,6 @@ gdb_test_multiple "finish" "finish from outermost frame disallowed" {
}
}
-# Verify that we can explicitly ask GDB to stop on all shared library
-# events, and that it does so.
-#
-if [istarget "hppa*-*-hpux*"] then {
- if ![runto_main] then { fail "break tests suppressed" }
-
- gdb_test_no_output "set stop-on-solib-events 1" \
- "set stop-on-solib-events"
-
- gdb_test "run" \
- "Stopped due to shared library event.*" \
- "triggered stop-on-solib-events" \
- "Start it from the beginning.*y or n. $" \
- "y"
-
- gdb_test_no_output "set stop-on-solib-events 0" \
- "reset stop-on-solib-events"
-}
-
-# Hardware breakpoints are unsupported on HP-UX. Verify that GDB
-# gracefully responds to requests to create them.
-#
-if [istarget "hppa*-*-hpux*"] then {
- if ![runto_main] then { fail "break tests suppressed" }
-
- gdb_test "hbreak" \
- "No hardware breakpoint support in the target.*" \
- "hw breaks disallowed"
-
- gdb_test "thbreak" \
- "No hardware breakpoint support in the target.*" \
- "temporary hw breaks disallowed"
-}
-
#********
diff --git a/gdb/testsuite/gdb.base/call-ar-st.exp b/gdb/testsuite/gdb.base/call-ar-st.exp
index 5a9b0fc..2b49116 100644
--- a/gdb/testsuite/gdb.base/call-ar-st.exp
+++ b/gdb/testsuite/gdb.base/call-ar-st.exp
@@ -390,46 +390,28 @@ gdb_test "tbreak $stop_line" \
gdb_test continue "Continuing\\..*main \\(.*\\) at.*$srcfile:$stop_line\[\t\r\n \]+$stop_line.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to tbreak7"
set stop_line [gdb_get_line_number "-step2-"]
-if { [istarget "hppa*-*-hpux*"] } {
- #
- # NOTE:(FIXME)
- # the aCC demangler cannot demangle the name of a function with >10 args.
- # so I added a .* after the name of the function, to match the
- # incredibly long mangled name
- # (getting aCC's libdemangle.a bundled w/ the system?)
- # DTS CLLbs16994 coulter 990114
- #
- # FIXME: use step for hppa* testing for now
- # guo 990621
- #
- gdb_test "step" \
- "print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);" \
- "step into print_long_arg_list"
-} else {
-
- # We can't just assume that a "step" will get us into
- # print_long_arg_list here,either.
- gdb_test "tbreak print_long_arg_list" \
- "Temporary breakpoint .* file .*$srcfile, line .*" \
- "tbreak in print_long_arg_list after stepping into memcpy"
- # The short match case below handles cases where a buffer
- # overflows or something, and expect can't deal with the full
- # line. Perhaps a more elegant solution exists... -sts 1999-08-17
- if {![gdb_skip_float_test "step into print_long_arg_list"]} {
- gdb_test_multiple "continue" "step into print_long_arg_list" {
- -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
- pass "step into print_long_arg_list"
- }
- -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
- pass "step into print_long_arg_list (short match)"
- }
+# We can't just assume that a "step" will get us into
+# print_long_arg_list here,either.
+gdb_test "tbreak print_long_arg_list" \
+ "Temporary breakpoint .* file .*$srcfile, line .*" \
+ "tbreak in print_long_arg_list after stepping into memcpy"
+# The short match case below handles cases where a buffer
+# overflows or something, and expect can't deal with the full
+# line. Perhaps a more elegant solution exists... -sts 1999-08-17
+if {![gdb_skip_float_test "step into print_long_arg_list"]} {
+ gdb_test_multiple "continue" "step into print_long_arg_list" {
+ -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
+ pass "step into print_long_arg_list"
+ }
+ -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
+ pass "step into print_long_arg_list (short match)"
}
- } else {
- # If skipping float tests, don't expect anything in arg list.
- gdb_test "continue" \
- "print_long_arg_list \\(.*\\).*" \
- "step into print_long_arg_list"
}
+} else {
+ # If skipping float tests, don't expect anything in arg list.
+ gdb_test "continue" \
+ "print_long_arg_list \\(.*\\).*" \
+ "step into print_long_arg_list"
}
set ws "\[\n\r\t \]+"
diff --git a/gdb/testsuite/gdb.base/callfuncs.exp b/gdb/testsuite/gdb.base/callfuncs.exp
index e717270..7cbc3be 100644
--- a/gdb/testsuite/gdb.base/callfuncs.exp
+++ b/gdb/testsuite/gdb.base/callfuncs.exp
@@ -165,15 +165,12 @@ proc do_function_calls {} {
# and attempting a jump through that (a totally random address).
setup_kfail gdb/1457 "rs6000*-*-aix*"
setup_kfail gdb/1457 "powerpc*-*-aix*"
- setup_kfail gdb/1457 hppa*-*-hpux*
gdb_test "p t_func_values(add,func_val2)" " = 1"
setup_kfail gdb/1457 "rs6000*-*-aix*"
setup_kfail gdb/1457 "powerpc*-*-aix*"
- setup_kfail gdb/1457 hppa*-*-hpux*
gdb_test "p t_func_values(func_val1,doubleit)" " = 1"
setup_kfail gdb/1457 "rs6000*-*-aix*"
setup_kfail gdb/1457 "powerpc*-*-aix*"
- setup_kfail gdb/1457 hppa*-*-hpux*
gdb_test "p t_call_add(add,3,4)" " = 7"
gdb_test "p t_call_add(func_val1,3,4)" " = 7"
diff --git a/gdb/testsuite/gdb.base/catch-fork-static.exp b/gdb/testsuite/gdb.base/catch-fork-static.exp
index 96570eb..78ce95e 100644
--- a/gdb/testsuite/gdb.base/catch-fork-static.exp
+++ b/gdb/testsuite/gdb.base/catch-fork-static.exp
@@ -27,8 +27,7 @@ if { [is_remote target] || ![isnative] } then {
# Until "catch fork" is implemented on other targets...
#
-if { ![istarget "hppa*-hp-hpux*"] && ![istarget "*-*-linux*"]
- && ![istarget "*-*-openbsd*"] } then {
+if { ![istarget "*-*-linux*"] && ![istarget "*-*-openbsd*"] } then {
continue
}
diff --git a/gdb/testsuite/gdb.base/display.exp b/gdb/testsuite/gdb.base/display.exp
index 1d02629..2c6ce27 100644
--- a/gdb/testsuite/gdb.base/display.exp
+++ b/gdb/testsuite/gdb.base/display.exp
@@ -194,15 +194,9 @@ gdb_test "print/r j" " = 0x0\[\\r\\n\]+" "debug test output 2a"
gdb_test "print j" " = 0\[\\r\\n\]+" "debug test output 3"
# x/0 j doesn't produce any output and terminates PA64 process when testing
-if [istarget "hppa2.0w-hp-hpux11*"] {
- xfail "'x/0 j' terminates PA64 process - skipped test point"
-} else {
- gdb_test_no_output "x/0 j"
-}
-if [istarget "hppa*-hp-hpux*"] {
- # on HP-UX you could access the first page without getting an error
- gdb_test "x/rx j" ".*(Cannot access|Error accessing) memory.*|.*0xa:\[ \t\]*\[0-9\]+.*"
-}
+gdb_test_no_output "x/0 j"
+
+gdb_test "x/rx j" ".*(Cannot access|Error accessing) memory.*|.*0xa:\[ \t\]*\[0-9\]+.*"
gdb_test "print/0 j" ".*Item count other than 1 is meaningless.*" "print/0 j"
gdb_test "print/s sum" " = 1000" "ignored s"
gdb_test "print/i sum" ".*Format letter.*is meaningless.*.*" "no i"
diff --git a/gdb/testsuite/gdb.base/foll-exec-mode.exp b/gdb/testsuite/gdb.base/foll-exec-mode.exp
index 8a0a3a9..181aa12 100644
--- a/gdb/testsuite/gdb.base/foll-exec-mode.exp
+++ b/gdb/testsuite/gdb.base/foll-exec-mode.exp
@@ -35,7 +35,7 @@ if { [target_info exists gdb_protocol]
# Until "catch exec" is implemented on other targets...
#
-if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {
+if {![istarget "*-linux*"]} then {
continue
}
diff --git a/gdb/testsuite/gdb.base/foll-exec.exp b/gdb/testsuite/gdb.base/foll-exec.exp
index a36f212..8d4875a 100644
--- a/gdb/testsuite/gdb.base/foll-exec.exp
+++ b/gdb/testsuite/gdb.base/foll-exec.exp
@@ -18,7 +18,7 @@
# Until "catch exec" is implemented on other targets...
#
-if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {
+if { ![istarget "*-linux*"] } then {
continue
}
@@ -193,10 +193,6 @@ proc do_exec_tests {} {
}
}
- # DTS CLLbs16760
- # PA64 doesn't know about $START$ in dld.sl at this point. It should.
- # - Michael Coulter
- setup_xfail hppa2.0w-hp-hpux* CLLbs16760
send_gdb "continue\n"
gdb_expect {
-re ".*xecuting new program:.*${testfile2}.*Catchpoint .*(exec\'d .*${testfile2}).*in .*$gdb_prompt $"\
diff --git a/gdb/testsuite/gdb.base/foll-fork.exp b/gdb/testsuite/gdb.base/foll-fork.exp
index 51e6a7a..1f23bf3 100644
--- a/gdb/testsuite/gdb.base/foll-fork.exp
+++ b/gdb/testsuite/gdb.base/foll-fork.exp
@@ -16,8 +16,7 @@
# Until "set follow-fork-mode" and "catch fork" are implemented on
# other targets...
#
-if { ![istarget "hppa*-hp-hpux*"] && ![istarget "*-*-linux*"]
- && ![istarget "*-*-openbsd*"] } then {
+if { ![istarget "*-*-linux*"] && ![istarget "*-*-openbsd*"] } then {
continue
}
diff --git a/gdb/testsuite/gdb.base/foll-vfork.exp b/gdb/testsuite/gdb.base/foll-vfork.exp
index 0659509..0356598 100644
--- a/gdb/testsuite/gdb.base/foll-vfork.exp
+++ b/gdb/testsuite/gdb.base/foll-vfork.exp
@@ -21,26 +21,10 @@
# Until "set follow-fork-mode" and "catch vfork" are implemented on
# other targets...
#
-if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {
+if {![istarget "*-linux*"]} then {
continue
}
-# Test to see if we are on an HP-UX 10.20 and if so,
-# do not run these tests as catching vfork is disabled for
-# 10.20.
-
-if [istarget "hppa*-hp-hpux10.20"] then {
- return 0
-}
-
-# NOTE drow/2002-12-06: I don't know what the referenced kernel problem
-# is, but it appears to be fixed in recent HP/UX versions.
-
-##if [istarget "hppa2.0w-hp-hpux*"] {
-## warning "Don't run gdb.base/foll-vfork.exp until JAGaa43495 kernel problem is fixed."
-## return 0
-##}
-
standard_testfile
set compile_options debug
@@ -207,46 +191,18 @@ proc vfork_and_exec_child_follow_through_step {} {
global gdb_prompt
global srcfile2
- if { [istarget "hppa*-*-hpux*"] && ![istarget "hppa*-*-hpux11.*"] } {
- # This test cannot be performed prior to HP-UX 10.30, because
- # ptrace-based debugging of a vforking program basically doesn't
- # allow the child to do things like hit a breakpoint between a
- # vfork and exec. This means that saying "set follow-fork
- # child; next" at a vfork() call won't work, because the
- # implementation of "next" sets a "step resume" breakpoint at
- # the return from the vfork(), which the child will hit on its
- # way to exec'ing.
- #
- verbose "vfork child-following next test ignored for pre-HP/UX-10.30 targets."
- return 0
- }
-
setup_gdb
gdb_test_no_output "set follow-fork child"
set test "step over vfork"
- if { [istarget "hppa*-*-hpux*"]} {
- # Since the child cannot be debugged until after it has exec'd,
- # and since there's a bp on "main" in the parent, and since the
- # bp's for the parent are recomputed in the exec'd child, the
- # step through a vfork should land us in the "main" for the
- # exec'd child, too.
- #
- set linenum [gdb_get_line_number "printf(\"Hello from vforked-prog" ${srcfile2}]
- gdb_test_multiple "next" $test {
- -re "Attaching after vfork to.*Executing new program.*Breakpoint.*vforked-prog.c:${linenum}.*$gdb_prompt " {
- pass "$test"
- }
- }
- } else {
- # The ideal support is to be able to debug the child even
- # before it execs. Thus, "next" lands on the next line after
- # the vfork.
- gdb_test_multiple "next" $test {
- -re "Attaching after .* vfork to child.*if \\(pid == 0\\).*$gdb_prompt " {
- pass "$test"
- }
+
+ # The ideal support is to be able to debug the child even
+ # before it execs. Thus, "next" lands on the next line after
+ # the vfork.
+ gdb_test_multiple "next" $test {
+ -re "Attaching after .* vfork to child.*if \\(pid == 0\\).*$gdb_prompt " {
+ pass "$test"
}
}
# The parent has been detached; allow time for any output it might
diff --git a/gdb/testsuite/gdb.base/funcargs.exp b/gdb/testsuite/gdb.base/funcargs.exp
index 4cc92f4..1c1280f 100644
--- a/gdb/testsuite/gdb.base/funcargs.exp
+++ b/gdb/testsuite/gdb.base/funcargs.exp
@@ -1013,13 +1013,6 @@ proc localvars_in_indirect_call { } {
#
gdb_test_multiple "finish" "finish from indirectly called function" {
- -re "\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*First.*$gdb_prompt $" {
- #On hppa2.0w-hp-hpux11.00, gdb finishes at one line earlier than
- #hppa1.1-hp-hpux11.00. Therefore, an extra "step" is necessary
- #to continue the test.
- send_gdb "step\n"
- exp_continue
- }
-re ".*\\(\\*pointer_to_call0a\\) \\(c, s, i, l\\);.*Second.*$gdb_prompt $" {
pass "finish from indirectly called function"
}
diff --git a/gdb/testsuite/gdb.base/hbreak2.exp b/gdb/testsuite/gdb.base/hbreak2.exp
index 6330d95..e227e1e 100644
--- a/gdb/testsuite/gdb.base/hbreak2.exp
+++ b/gdb/testsuite/gdb.base/hbreak2.exp
@@ -396,27 +396,15 @@ gdb_test "print marker2(99)" \
# As long as we're stopped (breakpointed) in a called function,
# verify that we can successfully backtrace & such from here.
-#
-# In this and the following test, the _sr4export check apparently is needed
-# for hppa*-*-hpux.
-#
-gdb_test_multiple "bt" "backtrace while in called function" {
- -re "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1.*_sr4export.*$gdb_prompt $" {
- pass "backtrace while in called function"
- }
- -re "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1.*function called from gdb.*$gdb_prompt $" {
- pass "backtrace while in called function"
- }
-}
+gdb_test "bt" \
+ "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1\[ \t\]*<function called from gdb>.*" \
+ "backtrace while in called function"
# Return from the called function. For remote targets, it's important to do
# this before runto_main, which otherwise may silently stop on the dummy
# breakpoint inserted by GDB at the program's entry point.
#
gdb_test_multiple "finish" "finish from called function" {
- -re "Run till exit from .*marker2.* at .*$bp_location8\r\n.* in _sr4export.*$gdb_prompt $" {
- pass "finish from called function"
- }
-re "Run till exit from .*marker2.* at .*$bp_location8\r\n.*function called from gdb.*$gdb_prompt $" {
pass "finish from called function"
}
diff --git a/gdb/testsuite/gdb.base/inferior-died.exp b/gdb/testsuite/gdb.base/inferior-died.exp
index c441484..5a88a13 100644
--- a/gdb/testsuite/gdb.base/inferior-died.exp
+++ b/gdb/testsuite/gdb.base/inferior-died.exp
@@ -21,7 +21,7 @@ if { [is_remote target] || ![isnative] } then {
# Until "set follow-fork-mode" and "catch fork" are implemented on
# other targets...
#
-if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-*-linux*"]} then {
+if { ![istarget "*-*-linux*"] } then {
unsupported "inferior-died.exp"
continue
}
diff --git a/gdb/testsuite/gdb.base/interrupt.exp b/gdb/testsuite/gdb.base/interrupt.exp
index 426c2a6..ed9bf32 100644
--- a/gdb/testsuite/gdb.base/interrupt.exp
+++ b/gdb/testsuite/gdb.base/interrupt.exp
@@ -99,11 +99,6 @@ if ![file exists $binfile] then {
return
}
-re "$gdb_prompt $" {
- # On HPUX-11.0 'send "p func1 ()"' above
- # terminates the program. A defect is pending on this
- # issue [defect #DTS CHFts24203]. Hence calling setup_xfail
- # below.
- setup_xfail "hppa*-*-*11*" CHFts24203
fail "call function when asleep (wrong output)"
}
default {
@@ -118,7 +113,6 @@ if ![file exists $binfile] then {
setup_xfail "vax-*-*"
setup_xfail "alpha-*-*"
setup_xfail "*-*-*bsd*"
- setup_xfail "*-*-hpux*"
setup_xfail "*-*-*lynx*"
fail "$msg (stays asleep)"
# Send the inferior a newline to wake it up.
@@ -153,9 +147,6 @@ if ![file exists $binfile] then {
# The optional leading \r\n is in case we sent a newline above
# to wake the program, in which case the program now sends it
# back.
- # FIXME: The pattern below leads to an expected success on HPUX-11.0
- # but the success is spurious. Need to provide the right reg.expr.
- # here.
set msg "echo data"
gdb_test_multiple "" $msg {
diff --git a/gdb/testsuite/gdb.base/multi-forks.exp b/gdb/testsuite/gdb.base/multi-forks.exp
index cb1464d..d9937db 100644
--- a/gdb/testsuite/gdb.base/multi-forks.exp
+++ b/gdb/testsuite/gdb.base/multi-forks.exp
@@ -16,7 +16,7 @@
# Until "set follow-fork-mode" and "catch fork" are implemented on
# other targets...
#
-if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-*-linux*"]} then {
+if { ![istarget "*-*-linux*"] } then {
continue
}
@@ -129,12 +129,6 @@ gdb_test "print pids\[0\]==0 || pids\[1\]==0 || pids\[2\]==0 || pids\[3\]==0" \
# Now test with detach-on-fork off.
#
-# detach-on-fork isn't implemented on hpux.
-#
-if {![istarget "*-*-linux*"]} then {
- continue
-}
-
# Start with a fresh gdb
clean_restart ${binfile}
diff --git a/gdb/testsuite/gdb.base/nodebug.exp b/gdb/testsuite/gdb.base/nodebug.exp
index 5cf7c77..fd021a6 100644
--- a/gdb/testsuite/gdb.base/nodebug.exp
+++ b/gdb/testsuite/gdb.base/nodebug.exp
@@ -81,54 +81,37 @@ if [runto inner] then {
# doesn't know the variables exist at all.
setup_xfail "rs6000*-*-aix*"
setup_xfail "powerpc*-*-aix*"
- if ![test_compiler_info "gcc-*"] {
- setup_xfail "hppa*-*-hpux*"
- }
gdb_test "p datalocal" "= 4"
setup_xfail "rs6000*-*-aix*"
setup_xfail "powerpc*-*-aix*"
- if ![test_compiler_info "gcc-*"] {
- setup_xfail "hppa*-*-hpux*"
- }
gdb_test "whatis datalocal" "<(data variable|variable), no debug info>"
setup_xfail "rs6000*-*-aix*"
setup_xfail "powerpc*-*-aix*"
- if ![test_compiler_info "gcc-*"] {
- setup_xfail "hppa*-*-hpux*"
- }
gdb_test "ptype datalocal" "<(data variable|variable), no debug info>"
gdb_test "p bssglobal" "= 0"
gdb_test "whatis bssglobal" "<(data variable|variable), no debug info>|int"
gdb_test "ptype bssglobal" "<(data variable|variable), no debug info>|int"
-
+
setup_xfail "rs6000*-*-aix*"
setup_xfail "powerpc*-*-aix*"
- if ![test_compiler_info "gcc-*"] {
- setup_xfail "hppa*-*-hpux*"
- }
gdb_test "p bsslocal" "= 0"
setup_xfail "rs6000*-*-aix*"
setup_xfail "powerpc*-*-aix*"
- if ![test_compiler_info "gcc-*"] {
- setup_xfail "hppa*-*-hpux*"
- }
gdb_test "whatis bsslocal" "<(data variable|variable), no debug info>"
setup_xfail "rs6000*-*-aix*"
setup_xfail "powerpc*-*-aix*"
- if ![test_compiler_info "gcc-*"] {
- setup_xfail "hppa*-*-hpux*"
- }
+
gdb_test "ptype bsslocal" "<(data variable|variable), no debug info>"
-
+
gdb_test "backtrace 10" "#0.*inner.*#1.*middle.*#2.*top.*#3.*main.*" \
"backtrace from inner in nodebug.exp"
# Or if that doesn't work, at least hope for the external symbols
@@ -143,32 +126,12 @@ if [runto inner] then {
setup_xfail "*-*-*" 2416
fail "p/c array_index(\"abcdef\",2)"
} else {
- #
- # On HP-UX, a support function (__d_plt_call) necessary to
- # implement an inferior call is normally only available when
- # the inferior was compiled with -g. Thus, we expect this
- # testpoint to fail on HP-UX.
- if { [istarget "hppa*-hpux*"] } {
- gdb_test_multiple "p/c array_index(\"abcdef\",2)" \
- "p/c array_index(\"abcdef\",2)" {
- -re ".*Suggest linking executable with -g.*$gdb_prompt $" {
- pass "p/c array_index(\"abcdef\",2)"
- }
- -re ".*Cannot find __wdb_call_dummy in.*end.o.*" {
- pass "p/c array_index(\"abcdef\",2)"
- }
- -re ".*99 'c'.*" {
- pass "p/c array_index(\"abcdef\",2)"
- }
- }
- } else {
- # We need to up this because this can be really slow on some boards.
- # (malloc() is called as part of the test).
- set prev_timeout $timeout
- set timeout 60
- gdb_test {p/c array_index("abcdef",2)} " = 99 'c'"
- set timeout $prev_timeout
- }
+ # We need to up this because this can be really slow on some boards.
+ # (malloc() is called as part of the test).
+ set prev_timeout $timeout
+ set timeout 60
+ gdb_test {p/c array_index("abcdef",2)} " = 99 'c'"
+ set timeout $prev_timeout
}
# Now, try that we can give names of file-local symbols which happen
diff --git a/gdb/testsuite/gdb.base/sepdebug.exp b/gdb/testsuite/gdb.base/sepdebug.exp
index c363be4..518cf4c 100644
--- a/gdb/testsuite/gdb.base/sepdebug.exp
+++ b/gdb/testsuite/gdb.base/sepdebug.exp
@@ -456,19 +456,10 @@ gdb_test "print marker2(99)" \
# As long as we're stopped (breakpointed) in a called function,
# verify that we can successfully backtrace & such from here.
-#
-# In this and the following test, the _sr4export check apparently is needed
-# for hppa*-*-hpux.
-#
-gdb_test_multiple "bt" "backtrace while in called function" {
- -re "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1.*_sr4export.*$gdb_prompt $" {
- pass "backtrace while in called function"
- }
- -re "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1.*function called from gdb.*$gdb_prompt $" {
- pass "backtrace while in called function"
- }
-}
+gdb_test "bt" \
+ "#0\[ \t\]*($hex in )?marker2.*:$bp_location8\r\n#1\[ \t\]*<function called from gdb>.*" \
+ "backtrace while in called function"
# Return from the called function. For remote targets, it's important to do
# this before runto_main, which otherwise may silently stop on the dummy
@@ -476,9 +467,6 @@ gdb_test_multiple "bt" "backtrace while in called function" {
#
gdb_test_multiple "finish" "finish from called function" {
- -re "Run till exit from .*marker2.* at .*$bp_location8\r\n.* in _sr4export.*$gdb_prompt $" {
- pass "finish from called function"
- }
-re "Run till exit from .*marker2.* at .*$bp_location8\r\n.*function called from gdb.*$gdb_prompt $" {
pass "finish from called function"
}
@@ -511,43 +499,6 @@ gdb_test_multiple "finish" "finish from outermost frame disallowed" {
}
}
-# Verify that we can explicitly ask GDB to stop on all shared library
-# events, and that it does so.
-#
-if [istarget "hppa*-*-hpux*"] then {
- if ![runto_main] then { fail "sepdebug tests suppressed" }
-
- gdb_test_no_output "set stop-on-solib-events 1" \
- "set stop-on-solib-events"
-
- gdb_test "run" \
- "Stopped due to shared library event.*" \
- "triggered stop-on-solib-events" \
- "Start it from the beginning.*y or n. $" \
- "y"
-
- gdb_test_no_output "set stop-on-solib-events 0" \
- "reset stop-on-solib-events"
-}
-
-# Hardware breakpoints are unsupported on HP-UX. Verify that GDB
-# gracefully responds to requests to create them.
-#
-if [istarget "hppa*-*-hpux*"] then {
- if ![runto_main] then { fail "sepdebug tests suppressed" }
-
- gdb_test "hbreak" \
- "No hardware breakpoint support in the target.*" \
- "hw breaks disallowed"
-
- gdb_test "thbreak" \
- "No hardware breakpoint support in the target.*" \
- "temporary hw breaks disallowed"
-}
-
-#********
-
-
#
# Test "next" over recursive function call.
#
diff --git a/gdb/testsuite/gdb.base/so-indr-cl.c b/gdb/testsuite/gdb.base/so-indr-cl.c
deleted file mode 100644
index 9b5e5a9..0000000
--- a/gdb/testsuite/gdb.base/so-indr-cl.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/* This program is linked against SOM shared libraries, which the loader
- automatically loads along with the program itself).
- */
-
-#include <stdio.h>
-extern "C" int solib_main (int);
-
-static int
-solib_wrapper (int (*function)(int))
-{
- return (*function)(100);
-}
-
-
-int main ()
-{
- int result;
-
- /* This is an indirect call to solib_main. */
- result = solib_wrapper (solib_main);
- return 0;
-}
diff --git a/gdb/testsuite/gdb.base/so-indr-cl.exp b/gdb/testsuite/gdb.base/so-indr-cl.exp
deleted file mode 100644
index d27c9f0..0000000
--- a/gdb/testsuite/gdb.base/so-indr-cl.exp
+++ /dev/null
@@ -1,129 +0,0 @@
-# Copyright 1997-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-
-# are we on a target board
-if ![isnative] then {
- return
-}
-
-# This test is presently only valid on HP-UX, since it requires
-# that we use HP-UX-specific compiler & linker options to build
-# the testcase.
-#
-if {! [istarget "hppa*-*-*hpux*"] } {
- return
-}
-
-set libfile "solib"
-set testfile "so-indr-cl"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-
-if [get_compiler_info] {
- return -1
-}
-
-# Build the shared libraries this test case needs.
-#
-#cd ${subdir}
-#remote_exec build "$CC -g +z -c ${libfile}1.c -o ${libfile}1.o"
-
-
-if {$hp_cc_compiler || $hp_aCC_compiler} {
- set additional_flags "additional_flags=+z"
-} else {
- set additional_flags "additional_flags=-fpic"
-}
-if {[gdb_compile "${srcdir}/${subdir}/${libfile}1.c" "${objdir}/${subdir}/${libfile}1.o" object [list debug $additional_flags]] != ""} {
- perror "Couldn't compile ${libfile}1.c"
- return -1
-}
-
-if [istarget "hppa*-hp-hpux*"] then {
- remote_exec build "ld -b ${objdir}/${subdir}/${libfile}1.o -o ${objdir}/${subdir}/${libfile}1.sl"
-} else {
- set additional_flags "additional_flags=-shared"
- gdb_compile "${objdir}/${subdir}/${libfile}1.o" "${objdir}/${subdir}/${libfile}1.sl" executable [list debug $additional_flags]
-}
-
-# Build the test case
-#remote_exec build "$CC -Aa -g ${srcfile} ${libfile}1.sl -o ${binfile}"
-
-
-if {$hp_cc_compiler} {
- set additional_flags "additional_flags=-Ae"
-} else {
- set additional_flags ""
-}
-if {[gdb_compile "${srcdir}/${subdir}/${srcfile} ${objdir}/${subdir}/${libfile}1.sl" "${binfile}" executable [list debug $additional_flags]] != ""} {
- perror "Couldn't build ${binfile}"
- return -1
-}
-
-#cd ..
-
-# Start with a fresh gdb
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-# This program implicitly loads SOM shared libraries. We wish to test
-# whether a user can set breakpoints in a shlib before running the
-# program, where the program doesn't directly call the shlib, but
-# indirectly does via passing its address to another function.
-#
-# ??rehrauer: Currently, this doesn't work, but we do catch the case
-# and explicitly disallow it. The reason it fails appears to be that
-#
-# [1] gdb consults only the linker symbol table in this scenario, and
-# [2] For a shlib function that is only indirectly called from the
-# main a.out, there is in the linker symbol table a stub whose
-# address is negative. Possibly this is to be interpreted as
-# an index into the DLT??
-#
-send_gdb "break solib_main\n"
-gdb_expect {
- -re "Cannot break on solib_main without a running program.*$gdb_prompt $"\
- {pass "break on indirect solib call before running"}
- -re "Breakpoint.*deferred.*\\(\"solib_main\" was not found.*$gdb_prompt $"\
- {pass "break on indirect solib call before running 2"}
- -re "$gdb_prompt $"\
- {fail "break on indirect solib call before running"}
- timeout {fail "(timeout) break on indirect solib call before running"}
-}
-
-# However, if we do run to the program's main, we then ought to be
-# able to set a breakpoint on the indirectly called function. (Apparently,
-# once the inferior is running, gdb consults the debug info rather than
-# the linker symbol table, and is able to find the correct address.)
-#
-if ![runto_main] then { fail "indirect solib call tests suppressed" }
-
-# Verify that we can step over the first shlib call.
-#
-send_gdb "break solib_main\n"
-gdb_expect {
- -re ".*\[Bb\]reakpoint \[0-9\]* at 0x\[0-9a-fA-F\]*: file.*${libfile}1.c.*$gdb_prompt $"\
- {pass "break on indirect solib call after running"}
- -re "$gdb_prompt $"\
- {fail "break on indirect solib call after running"}
- timeout {fail "(timeout) break on indirect solib call after running"}
-}
-
-gdb_exit
-return 0
diff --git a/gdb/testsuite/gdb.base/solib.c b/gdb/testsuite/gdb.base/solib.c
deleted file mode 100644
index 6fb9f5e..0000000
--- a/gdb/testsuite/gdb.base/solib.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/* This program uses HP-UX-specific features to load and unload SOM
- shared libraries that it wasn't linked against (i.e., libraries
- that the loader doesn't automatically load along with the program
- itself).
- */
-
-#include <stdio.h>
-#include <dl.h>
-
-int main ()
-{
- shl_t solib_handle;
- int dummy;
- int status;
- int (*solib_main) (int);
-
- /* Load a shlib, with immediate binding of all symbols.
-
- Note that the pathname of the loaded shlib is assumed to be relative
- to the testsuite directory (from whence the tested GDB is run), not
- from dot/.
- */
- dummy = 1; /* Put some code between shl_ calls... */
- solib_handle = shl_load ("gdb.base/solib1.sl", BIND_IMMEDIATE, 0);
-
- /* Find a function within the shlib, and call it. */
- status = shl_findsym (&solib_handle,
- "solib_main",
- TYPE_PROCEDURE,
- (long *) &solib_main);
- status = (*solib_main) (dummy);
-
- /* Unload the shlib. */
- status = shl_unload (solib_handle);
-
- /* Load a different shlib, with deferred binding of all symbols. */
- dummy = 2;
- solib_handle = shl_load ("gdb.base/solib2.sl", BIND_DEFERRED, 0);
-
- /* Find a function within the shlib, and call it. */
- status = shl_findsym (&solib_handle,
- "solib_main",
- TYPE_PROCEDURE,
- (long *) &solib_main);
- status = (*solib_main) (dummy);
-
- /* Unload the shlib. */
- status = shl_unload (solib_handle);
-
- /* Reload the first shlib again, with deferred symbol binding this time. */
- dummy = 3;
- solib_handle = shl_load ("gdb.base/solib1.sl", BIND_IMMEDIATE, 0);
-
- /* Unload it without trying to find any symbols in it. */
- status = shl_unload (solib_handle);
-
- /* All done. */
- dummy = -1;
- return 0;
-}
diff --git a/gdb/testsuite/gdb.base/solib.exp b/gdb/testsuite/gdb.base/solib.exp
deleted file mode 100644
index 5e08d5b..0000000
--- a/gdb/testsuite/gdb.base/solib.exp
+++ /dev/null
@@ -1,352 +0,0 @@
-# Copyright 1997-2015 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-
-# are we on a target board
-if ![isnative] then {
- return
-}
-
-# This test is presently only valid on HP-UX. It verifies GDB's
-# ability to catch loads and unloads of shared libraries.
-#
-
-#setup_xfail "*-*-*"
-#clear_xfail "hppa*-*-*hpux*"
-if {![istarget "hppa*-*-hpux*"]} {
- return 0
-}
-
-set testfile "solib"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-
-# build the first test case
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- untested solib.exp
- return -1
-}
-
-if [get_compiler_info] {
- return -1
-}
-
-# Build the shared libraries this test case needs.
-#
-#cd ${subdir}
-#remote_exec build "$CC -g +z -c ${testfile}1.c -o ${testfile}1.o"
-#remote_exec build "$CC -g +z -c ${testfile}2.c -o ${testfile}2.o"
-
-if {$gcc_compiled == 0} {
- if [istarget "hppa*-hp-hpux*"] then {
- set additional_flags "additional_flags=+z"
- } else {
- # don't know what the compiler is...
- set additional_flags ""
- }
-} else {
- set additional_flags "additional_flags=-fpic"
-}
-
-if {[gdb_compile "${srcdir}/${subdir}/${testfile}1.c" "${binfile}1.o" object [list debug $additional_flags]] != ""} {
- perror "Couldn't compile ${testfile}1.c"
- #return -1
-}
-if {[gdb_compile "${srcdir}/${subdir}/${testfile}2.c" "${binfile}2.o" object [list debug, $additional_flags]] != ""} {
- perror "Couldn't compile ${testfile}2.c"
- #return -1
-}
-
-if [istarget "hppa*-*-hpux*"] {
- remote_exec build "ld -b ${binfile}1.o -o ${binfile}1.sl"
- remote_exec build "ld -b ${binfile}2.o -o ${binfile}2.sl"
-} else {
- set additional_flags "additional_flags=-shared"
- gdb_compile "${binfile}1.o" "${binfile}1.sl" executable [list debug $additional_flags]
- gdb_compile "${binfile}2.o" "${binfile}2.sl" executable [list debug $additional_flags]
-}
-
-# Build a version where the main program is in a shared library. For
-# testing an indirect call made in a shared library.
-
-if {[gdb_compile "${srcdir}/${subdir}/${testfile}.c" "${binfile}_sl.o" object [list debug $additional_flags]] != ""} {
- perror "Couldn't compile ${testfile}.c for ${binfile}_sl.o"
- #return -1
-}
-
-if { [istarget "hppa*-*-hpux*"] } {
- remote_exec build "ld -b ${binfile}_sl.o -o ${binfile}_sl.sl"
-} else {
- set additional_flags "additional_flags=-shared"
- gdb_compile "${binfile}_sl.o" "${binfile}_sl.sl" executable [list debug $additional_flags]
-}
-
-if { [istarget "hppa*-*-hpux*"] } {
- set additional_flags "-Wl,-u,main"
- if { [gdb_compile "${binfile}_sl.sl" "${binfile}_sl" executable [list debug $additional_flags]] != "" } {
- untested solib.exp
- return -1
- }
-} else {
- # FIXME: need to fill this part in for non-HP build
-}
-
-#cd ..
-
-# Start with a fresh gdb
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
-# This program manually loads and unloads SOM shared libraries, via calls
-# to shl_load and shl_unload.
-#
-if ![runto_main] then { fail "catch load/unload tests suppressed" }
-
-# Verify that we complain if the user tells us to catch something we
-# don't understand.
-#
-send_gdb "catch a_cold\n"
-gdb_expect {
- -re "Unknown event kind specified for catch.*$gdb_prompt $"\
- {pass "bogus catch kind is disallowed"}
- -re "$gdb_prompt $"\
- {fail "bogus catch kind is disallowed"}
- timeout {fail "(timeout) bogus catch kind is disallowed"}
-}
-
-# Verify that we can set a generic catchpoint on shlib loads. I.e., that
-# we can catch any shlib load, without specifying the name.
-#
-send_gdb "catch load\n"
-gdb_expect {
- -re "Catchpoint \[0-9\]* .load <any library>.*$gdb_prompt $"\
- {pass "set generic catch load"}
- -re "$gdb_prompt $"\
- {fail "set generic catch load"}
- timeout {fail "(timeout) set generic catch load"}
-}
-
-send_gdb "continue\n"
-gdb_expect {
- -re "Catchpoint \[0-9\] .loaded gdb.base/solib1.sl.*$gdb_prompt $"\
- {pass "caught generic solib load"}
- -re "$gdb_prompt $"\
- {fail "caught generic solib load"}
- timeout {fail "(timeout) caught generic solib load"}
-}
-
-# Set a breakpoint on the line following the shl_load call, and
-# continue.
-#
-# ??rehrauer: It appears that we can't just say "finish" from here;
-# GDB is getting confused by the dld's presense on the stack.
-#
-send_gdb "break 27\n"
-gdb_expect {
- -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
- {pass "set break after shl_load"}
- -re "$gdb_prompt $"\
- {fail "set break after shl_load"}
- timeout {fail "(timeout) set break after shl_load"}
-}
-
-send_gdb "continue\n"
-gdb_expect {
- -re "Breakpoint \[0-9\]*, main .. at .*solib.c:27.*$gdb_prompt $"\
- {pass "continue after generic catch load"}
- -re "$gdb_prompt $"\
- {fail "continue after generic catch load"}
- timeout {fail "(timeout) continue after generic catch load"}
-}
-
-# Step over the call to shl_findsym.
-#
-# ??rehrauer: In theory, since the call to shl_load asked for
-# immediate binding of the shlib's symbols, and since the
-# shlib's symbols should have been auto-loaded, we ought to
-# be able to set a breakpoint on solib_main now. However,
-# that seems not to be the case. Dunno why for sure; perhaps
-# the breakpoint wants to be set on an import stub in the
-# main program for solib_main? There wouldn't be one, in
-# this case...
-#
-send_gdb "next\n"
-gdb_expect {
- -re "$gdb_prompt $"\
- {pass "step over shl_findsym"}
- timeout {fail "(timeout) step over shl_findsym"}
-}
-
-# Verify that we can catch an unload of any library.
-#
-send_gdb "catch unload\n"
-gdb_expect {
- -re "Catchpoint \[0-9\]* .unload <any library>.*$gdb_prompt $"\
- {pass "set generic catch unload"}
- -re "$gdb_prompt $"\
- {fail "set generic catch unload"}
- timeout {fail "(timeout) set generic catch load"}
-}
-
-send_gdb "continue\n"
-gdb_expect {
- -re "Catchpoint \[0-9\] .unloaded gdb.base/solib1.sl.*$gdb_prompt $"\
- {pass "caught generic solib unload"}
- -re "$gdb_prompt $"\
- {fail "caught generic solib unload"}
- timeout {fail "(timeout) caught generic solib unload"}
-}
-
-# Verify that we can catch a load of a specific library. (Delete
-# all the other catchpoints first, so that the generic catchpoints
-# we've previously set don't trigger.)
-#
-send_gdb "delete\n"
-gdb_expect {
- -re "Delete all breakpoints.*y or n.*"\
- {send_gdb "y\n"
- gdb_expect {
- -re "$gdb_prompt $"\
- {pass "delete all catchpoints"}
- timeout {fail "(timeout) delete all catchpoints"}
- }
- }
- -re "$gdb_prompt $"\
- {fail "delete all catchpoints"}
- timeout {fail "(timeout) delete all catchpoints"}
-}
-
-send_gdb "catch load gdb.base/solib2.sl\n"
-gdb_expect {
- -re "Catchpoint \[0-9\]* .load gdb.base/solib2.sl.*$gdb_prompt $"\
- {pass "set specific catch load"}
- -re "$gdb_prompt $"\
- {fail "set specific catch load"}
- timeout {fail "(timeout) set specific catch load"}
-}
-
-send_gdb "continue\n"
-gdb_expect {
- -re "Catchpoint \[0-9\] .loaded gdb.base/solib2.sl.*$gdb_prompt $"\
- {pass "caught specific solib load"}
- -re "$gdb_prompt $"\
- {fail "caught specific solib load"}
- timeout {fail "(timeout) caught specific solib load"}
-}
-
-# Verify that we can catch an unload of a specific library.
-#
-send_gdb "catch unload gdb.base/solib2.sl\n"
-gdb_expect {
- -re "Catchpoint \[0-9\]* .unload gdb.base/solib2.sl.*$gdb_prompt $"\
- {pass "set specific catch unload"}
- -re "$gdb_prompt $"\
- {fail "set specific catch unload"}
- timeout {fail "(timeout) set specific catch unload"}
-}
-
-send_gdb "continue\n"
-gdb_expect {
- -re "Catchpoint \[0-9\] .unloaded gdb.base/solib2.sl.*$gdb_prompt $"\
- {pass "caught specific solib unload"}
- -re "$gdb_prompt $"\
- {fail "caught specific solib unload"}
- timeout {fail "(timeout) caught specific solib unload"}
-}
-
-# Verify that we can set a catchpoint on a specific library that
-# happens not to be loaded by the program. And, that this catchpoint
-# won't trigger inappropriately when other shlibs are loaded.
-#
-send_gdb "break 55\n"
-gdb_expect {
- -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
- {pass "set break on shl_unload"}
- -re "$gdb_prompt $"\
- {fail "set break on shl_unload"}
- timeout {fail "(timeout) set break on shl_unload"}
-}
-
-send_gdb "break 58\n"
-gdb_expect {
- -re "Breakpoint \[0-9\]* at.*$gdb_prompt $"\
- {pass "set break after shl_unload"}
- -re "$gdb_prompt $"\
- {fail "set break after shl_unload"}
- timeout {fail "(timeout) set break after shl_unload"}
-}
-
-send_gdb "catch load foobar.sl\n"
-gdb_expect {
- -re "Catchpoint \[0-9\]* .load foobar.sl.*$gdb_prompt $"\
- {pass "set specific catch load for nonloaded shlib"}
- -re "$gdb_prompt $"\
- {fail "set specific catch load for nonloaded shlib"}
- timeout {fail "(timeout) set specific catch load for nonloaded shlib"}
-}
-
-send_gdb "catch unload foobar.sl\n"
-gdb_expect {
- -re "Catchpoint \[0-9\]* .unload foobar.sl.*$gdb_prompt $"\
- {pass "set specific catch unload for nonloaded shlib"}
- -re "$gdb_prompt $"\
- {fail "set specific catch unload for nonloaded shlib"}
- timeout {fail "(timeout) set specific catch unload for nonloaded shlib"}
-}
-
-send_gdb "continue\n"
-gdb_expect {
- -re "Breakpoint \[0-9\]*.*$gdb_prompt $"\
- {pass "specific catch load doesn't trigger inappropriately"}
- -re "$gdb_prompt $"\
- {fail "specific catch load doesn't trigger inappropriately"}
- timeout {fail "(timeout) specific catch load doesn't trigger inappropriately"}
-}
-
-send_gdb "continue\n"
-gdb_expect {
- -re "Breakpoint \[0-9\]*.*$gdb_prompt $"\
- {pass "specific catch unload doesn't trigger inappropriately"}
- -re "$gdb_prompt $"\
- {fail "specific catch unload doesn't trigger inappropriately"}
- timeout {fail "(timeout) specific catch unload doesn't trigger inappropriately"}
-}
-
-# ??rehrauer: There ought to be testpoints here that verify that
-# load/unload catchpoints can use conditionals, can be temporary,
-# self-disabling, etc etc.
-#
-
-gdb_exit
-
-#
-# Test stepping into an indirect call in a shared library.
-#
-
-gdb_start
-gdb_load ${binfile}_sl
-gdb_test "break main" ".*deferred. at .main..*" "break on main"
-gdb_test "run" ".*Breakpoint.*main.*solib.c.*" "hit breakpoint at main"
-gdb_test "break 45" "Breakpoint.*solib.c, line 45.*" "break on indirect call"
-gdb_test "continue" "Continuing.*solib.c:45.*" \
- "continue to break on indirect call"
-gdb_test "step" "solib_main.*solib1.c:17.*return arg.arg.*" \
- "step into indirect call from a shared library"
-gdb_exit
-
-return 0
diff --git a/gdb/testsuite/gdb.base/solib1.c b/gdb/testsuite/gdb.base/solib1.c
index c7d17f4..16b7233 100644
--- a/gdb/testsuite/gdb.base/solib1.c
+++ b/gdb/testsuite/gdb.base/solib1.c
@@ -1,7 +1,3 @@
-/* This program is intended to be built as an HP-UX SOM shared
- library, for use by the solib.exp testcase. It simply returns
- the square of its integer argument.
- */
#if defined(__cplusplus) || defined(__STDCPP__)
extern "C"
#endif
diff --git a/gdb/testsuite/gdb.base/solib2.c b/gdb/testsuite/gdb.base/solib2.c
deleted file mode 100644
index 131c337..0000000
--- a/gdb/testsuite/gdb.base/solib2.c
+++ /dev/null
@@ -1,14 +0,0 @@
-/* This program is intended to be built as an HP-UX SOM shared
- library, for use by the solib.exp testcase. It simply returns
- the cube of its integer argument.
- */
-#ifdef __cplusplus
-extern "C" {
-#endif
-int solib_main (int arg)
-{
- return arg*arg*arg;
-}
-#ifdef __cplusplus
-}
-#endif
diff --git a/gdb/testsuite/gdb.base/step-test.exp b/gdb/testsuite/gdb.base/step-test.exp
index 13938b0..50534fc 100644
--- a/gdb/testsuite/gdb.base/step-test.exp
+++ b/gdb/testsuite/gdb.base/step-test.exp
@@ -65,7 +65,7 @@ gdb_test "step" ".*${decimal}.*myglob.*" "step into"
# to the restoration of the global pointer (which is a caller-save).
# Similarly on MIPS PIC targets.
set test "step out"
-if { [istarget "hppa2.0w-hp-hpux*"] || [istarget "ia64-*-*"] || [istarget "mips*-*-*"]} {
+if { [istarget "ia64-*-*"] || [istarget "mips*-*-*"]} {
gdb_test_multiple "finish" "$test" {
-re ".*${decimal}.*a.*5.*= a.*3.*$gdb_prompt $" {
pass "$test"
@@ -157,7 +157,7 @@ gdb_test_multiple "finish" "$test" {
# On IA-64, we end up on callee instead of on the following line due
# to the restoration of the global pointer.
# Similarly on MIPS PIC targets.
- if { [istarget "hppa2.0w-hp-hpux*"] || [istarget "ia64-*-*"] || [istarget "mips*-*-*"] } {
+ if { [istarget "ia64-*-*"] || [istarget "mips*-*-*"] } {
test_i "$test" "stepi" \
".*${decimal}.*callee.*STEPI" ".*${decimal}.*callee.*NEXTI"
} else {
diff --git a/gdb/testsuite/gdb.dwarf2/pr10770.c b/gdb/testsuite/gdb.dwarf2/pr10770.c
index 64dfc91..b7e0ed4 100644
--- a/gdb/testsuite/gdb.dwarf2/pr10770.c
+++ b/gdb/testsuite/gdb.dwarf2/pr10770.c
@@ -4,7 +4,6 @@
/* HP-UX libunwind.so doesn't provide _UA_END_OF_STACK */
/* { dg-do run } */
/* { dg-options "-fexceptions" } */
-/* { dg-skip-if "" { "ia64-*-hpux11.*" } { "*" } { "" } } */
/* Verify DW_OP_* handling in the unwinder. */
#include <unwind.h>
diff --git a/gdb/testsuite/gdb.mi/non-stop.c b/gdb/testsuite/gdb.mi/non-stop.c
index 5acfefa..530b5d6 100644
--- a/gdb/testsuite/gdb.mi/non-stop.c
+++ b/gdb/testsuite/gdb.mi/non-stop.c
@@ -21,19 +21,6 @@
#include <pthread.h>
#include <unistd.h>
-/* Under HPUX 10, the second arg of pthread_create
- is prototyped to be just a "pthread_attr_t", while under Solaris it
- is a "pthread_attr_t *". Arg! */
-
-#if defined (__hpux__)
-#define PTHREAD_CREATE_ARG2(arg) arg
-#define PTHREAD_CREATE_NULL_ARG2 null_attr
-static pthread_attr_t null_attr;
-#else
-#define PTHREAD_CREATE_ARG2(arg) &arg
-#define PTHREAD_CREATE_NULL_ARG2 NULL
-#endif
-
int exit_first_thread = 0;
void break_at_me (int id, int i)
@@ -71,7 +58,7 @@ create_thread (int id)
int *id2 = malloc (sizeof (int));
*id2 = id;
- if (pthread_create (&tid, PTHREAD_CREATE_NULL_ARG2, worker, (void *) id2))
+ if (pthread_create (&tid, NULL, worker, (void *) id2))
{
perror ("pthread_create 1");
exit (1);
diff --git a/gdb/testsuite/gdb.mi/pthreads.c b/gdb/testsuite/gdb.mi/pthreads.c
index 70fd521..e5d7b61 100644
--- a/gdb/testsuite/gdb.mi/pthreads.c
+++ b/gdb/testsuite/gdb.mi/pthreads.c
@@ -25,19 +25,6 @@
#include <pthread.h>
#include <unistd.h>
-/* Under HPUX 10, the second arg of pthread_create
- is prototyped to be just a "pthread_attr_t", while under Solaris it
- is a "pthread_attr_t *". Arg! */
-
-#if defined (__hpux__)
-#define PTHREAD_CREATE_ARG2(arg) arg
-#define PTHREAD_CREATE_NULL_ARG2 null_attr
-static pthread_attr_t null_attr;
-#else
-#define PTHREAD_CREATE_ARG2(arg) &arg
-#define PTHREAD_CREATE_NULL_ARG2 NULL
-#endif
-
void *
routine (void *arg)
{
@@ -64,7 +51,7 @@ create_thread (void)
{
pthread_t tid;
- if (pthread_create (&tid, PTHREAD_CREATE_NULL_ARG2, routine, (void *) 0xfeedface))
+ if (pthread_create (&tid, NULL, routine, (void *) 0xfeedface))
{
perror ("pthread_create 1");
exit (1);
diff --git a/gdb/testsuite/gdb.multi/bkpt-multi-exec.exp b/gdb/testsuite/gdb.multi/bkpt-multi-exec.exp
index e66c1ba..bd994fe 100644
--- a/gdb/testsuite/gdb.multi/bkpt-multi-exec.exp
+++ b/gdb/testsuite/gdb.multi/bkpt-multi-exec.exp
@@ -19,7 +19,7 @@ if { [is_remote target] || ![isnative] } then {
# Until "catch exec" is implemented on other targets...
#
-if {![istarget "hppa*-hp-hpux*"] && ![istarget "*-linux*"]} then {
+if {![istarget "*-linux*"]} then {
continue
}
diff --git a/gdb/testsuite/gdb.threads/pthreads.c b/gdb/testsuite/gdb.threads/pthreads.c
index 1ad521f..2e1b452 100644
--- a/gdb/testsuite/gdb.threads/pthreads.c
+++ b/gdb/testsuite/gdb.threads/pthreads.c
@@ -24,19 +24,6 @@
#include <pthread.h>
#include <unistd.h>
-/* Under HPUX 10, the second arg of pthread_create
- is prototyped to be just a "pthread_attr_t", while under Solaris it
- is a "pthread_attr_t *". Arg! */
-
-#if defined (__hpux__)
-#define PTHREAD_CREATE_ARG2(arg) arg
-#define PTHREAD_CREATE_NULL_ARG2 null_attr
-static pthread_attr_t null_attr;
-#else
-#define PTHREAD_CREATE_ARG2(arg) &arg
-#define PTHREAD_CREATE_NULL_ARG2 NULL
-#endif
-
static int verbose = 0;
static void
@@ -140,7 +127,7 @@ main(argc, argv)
}
#endif
- if (pthread_create (&tid1, PTHREAD_CREATE_ARG2(attr), thread1, (void *) 0xfeedface))
+ if (pthread_create (&tid1, &attr, thread1, (void *) 0xfeedface))
{
perror ("pthread_create 1");
exit (1);
@@ -148,7 +135,7 @@ main(argc, argv)
if (verbose) printf ("Made thread %ld\n", (long) tid1);
sleep (1);
- if (pthread_create (&tid2, PTHREAD_CREATE_NULL_ARG2, thread2, (void *) 0xdeadbeef))
+ if (pthread_create (&tid2, NULL, thread2, (void *) 0xdeadbeef))
{
perror ("pthread_create 2");
exit (1);
diff --git a/gdb/testsuite/gdb.threads/staticthreads.exp b/gdb/testsuite/gdb.threads/staticthreads.exp
index 2527204..18648ed 100644
--- a/gdb/testsuite/gdb.threads/staticthreads.exp
+++ b/gdb/testsuite/gdb.threads/staticthreads.exp
@@ -58,7 +58,7 @@ gdb_test_multiple "continue" "$test" {
set sig "SIG32"
-# SIGRTMIN is 37 on hppa-linux and hpux
+# SIGRTMIN is 37 on hppa-linux
if [istarget hppa*-*-*] {
set sig "SIG37"
}
diff --git a/gdb/testsuite/lib/future.exp b/gdb/testsuite/lib/future.exp
index 994843e..9a9becb 100644
--- a/gdb/testsuite/lib/future.exp
+++ b/gdb/testsuite/lib/future.exp
@@ -380,9 +380,6 @@ proc gdb_default_target_compile {source destfile type options} {
} elseif {[regexp ".*(osf|irix5|linux).*" $target_triplet]} {
# OSF/1 or IRIX 5
append add_flags " -Wl,-rpath,$tool_root_dir/libstdc++"
- } elseif {[regexp ".*hppa.*" $target_triplet]} {
- # HP-UX
- append add_flags " -Wl,-a,shared_archive"
}
}
}
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
index caf6ad4..765ac83 100644
--- a/gdb/testsuite/lib/gdb.exp
+++ b/gdb/testsuite/lib/gdb.exp
@@ -2840,15 +2840,6 @@ gdb_caching_proc skip_btrace_pt_tests {
return $skip_btrace_tests
}
-# Skip all the tests in the file if you are not on an hppa running
-# hpux target.
-
-proc skip_hp_tests {} {
- eval set skip_hp [ expr ![isnative] || ![istarget "hppa*-*-hpux*"] ]
- verbose "Skip hp tests is $skip_hp"
- return $skip_hp
-}
-
# Return whether we should skip tests for showing inlined functions in
# backtraces. Requires get_compiler_info and get_debug_format.
@@ -3374,8 +3365,7 @@ proc gdb_compile {source dest type options} {
if { $shlib_load || ($shlib_found && [is_remote target]) } {
if { ([istarget "*-*-mingw*"]
|| [istarget *-*-cygwin*]
- || [istarget *-*-pe*]
- || [istarget hppa*-*-hpux*])} {
+ || [istarget *-*-pe*]) } {
# Do not need anything.
} elseif { [istarget *-*-freebsd*] || [istarget *-*-openbsd*] } {
lappend new_options "ldflags=-Wl,-rpath,${outdir}"
@@ -3554,14 +3544,7 @@ proc gdb_compile_shlib {sources dest options} {
}
}
default {
- switch -glob [istarget] {
- "hppa*-hp-hpux*" {
- lappend obj_options "additional_flags=+z"
- }
- default {
- # don't know what the compiler is...
- }
- }
+ # don't know what the compiler is...
}
}
@@ -3575,49 +3558,46 @@ proc gdb_compile_shlib {sources dest options} {
lappend objects ${outdir}/${sourcebase}.o
}
- if [istarget "hppa*-*-hpux*"] {
- remote_exec build "ld -b ${objects} -o ${dest}"
+ set link_options $options
+ if [test_compiler_info "xlc-*"] {
+ lappend link_options "additional_flags=-qmkshrobj"
} else {
- set link_options $options
- if [test_compiler_info "xlc-*"] {
- lappend link_options "additional_flags=-qmkshrobj"
- } else {
- lappend link_options "additional_flags=-shared"
-
- if { ([istarget "*-*-mingw*"]
- || [istarget *-*-cygwin*]
- || [istarget *-*-pe*]) } {
- if { [is_remote host] } {
- set name [file tail ${dest}]
- } else {
- set name ${dest}
- }
- lappend link_options "additional_flags=-Wl,--out-implib,${name}.a"
- } elseif [is_remote target] {
- # By default, we do not set the soname. This causes the linker
- # on ELF systems to create a DT_NEEDED entry in the executable
- # refering to the full path name of the library. This is a
- # problem in remote testing if the library is in a different
- # directory there. To fix this, we set a soname of just the
- # base filename for the library, and add an appropriate -rpath
- # to the main executable (in gdb_compile).
- set destbase [file tail $dest]
- lappend link_options "additional_flags=-Wl,-soname,$destbase"
- }
- }
- if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} {
- return -1
- }
- if { [is_remote host]
- && ([istarget "*-*-mingw*"]
- || [istarget *-*-cygwin*]
- || [istarget *-*-pe*]) } {
- set dest_tail_name [file tail ${dest}]
- remote_upload host $dest_tail_name.a ${dest}.a
- remote_file host delete $dest_tail_name.a
- }
+ lappend link_options "additional_flags=-shared"
+
+ if { ([istarget "*-*-mingw*"]
+ || [istarget *-*-cygwin*]
+ || [istarget *-*-pe*]) } {
+ if { [is_remote host] } {
+ set name [file tail ${dest}]
+ } else {
+ set name ${dest}
+ }
+ lappend link_options "additional_flags=-Wl,--out-implib,${name}.a"
+ } elseif [is_remote target] {
+ # By default, we do not set the soname. This causes the linker
+ # on ELF systems to create a DT_NEEDED entry in the executable
+ # refering to the full path name of the library. This is a
+ # problem in remote testing if the library is in a different
+ # directory there. To fix this, we set a soname of just the
+ # base filename for the library, and add an appropriate -rpath
+ # to the main executable (in gdb_compile).
+ set destbase [file tail $dest]
+ lappend link_options "additional_flags=-Wl,-soname,$destbase"
+ }
+ }
+ if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} {
+ return -1
}
- return ""
+ if { [is_remote host]
+ && ([istarget "*-*-mingw*"]
+ || [istarget *-*-cygwin*]
+ || [istarget *-*-pe*]) } {
+ set dest_tail_name [file tail ${dest}]
+ remote_upload host $dest_tail_name.a ${dest}.a
+ remote_file host delete $dest_tail_name.a
+ }
+
+ return ""
}
# This is just like gdb_compile_shlib, above, except that it tries compiling
@@ -4954,7 +4934,6 @@ gdb_caching_proc gdb_has_argv0 {
|| [istarget *-wince-pe] || [istarget *-*-mingw32ce*]
|| [istarget *-*-symbianelf*]
|| [istarget *-*-osf*]
- || [istarget *-*-hpux*]
|| [istarget *-*-dicos*]
|| [istarget *-*-nto*]
|| [istarget *-*-*vms*]
--
2.6.4
^ permalink raw reply [flat|nested] 14+ messages in thread