[gdb/testsuite] Fix index-cache.exp with cc-with-{gdb-index,debug-names}

[Tom de Vries <tdevries@suse.de>]

[-- Attachment #1: Type: text/plain, Size: 1887 bytes --]

[ was: Re: [PATCH][gdb/testsuite] Fix index-cache.exp with
CC_WITH_TWEAKS_FLAGS=-i ]

On 03-05-19 23:17, Simon Marchi wrote:
> On 2019-05-03 6:43 a.m., Tom de Vries wrote:
>> Hi,
>>
>> When running gdb.base/index-cache.exp with target board cc-with-tweaks with
>> CC_WITH_TWEAKS_FLAGS set to "-i", we run into:
>> ...
>> FAIL: gdb.base/index-cache.exp: test_cache_enabled_miss: at least one file \
>>       was created
>> FAIL: gdb.base/index-cache.exp: test_cache_enabled_miss: expected file is there
>> FAIL: gdb.base/index-cache.exp: test_cache_enabled_miss: check index-cache stats
>> FAIL: gdb.base/index-cache.exp: test_cache_enabled_hit: check index-cache stats
>> ...
>>
>> The problem is that the target board makes sure that the generated executable
>> contains a .gdb_index section, while the test assumes that the executable
>> doesn't contain this section.
>>
>> Fix this by removing the .gdb_index section from the generated executable.
>>
>> Tested on x86_64-linux with native and CC_WITH_TWEAKS_FLAGS=-i config.
>>
>> OK for trunk?
>>
>> Thanks,
>> - Tom
> 
> Hi Tom,
> 
> I would slightly prefer that instead of doing this, we would notice that that file
> already has an index (in the form of .gdb_index or .debug_names), and adjust our
> expectations in the test.
> 
> In other words, we currently assert that loading the file in GDB will produce some
> files in the cache.  However, if we know that the file already has an index, we
> should verify that no file was produced, as this is the behavior we expect when
> loading a file which already has an index.
> 
> Stripping the index makes the test pass, but it just goes back to testing the same
> thing as with the default board file.  Adjusting our expectation to the presence
> of an index makes the test cover a different use case.

I've implemented this approach, attached below.

OK for trunk?

Thanks,
- Tom

[-- Attachment #2: 0001-gdb-testsuite-Fix-index-cache.exp-with-cc-with-gdb-index-debug-names.patch --]
[-- Type: text/x-patch, Size: 3989 bytes --]

[gdb/testsuite] Fix index-cache.exp with cc-with-{gdb-index,debug-names}

In gdb.base/index-cache.exp, handle the case that binfile contains either a
.gdb_index or .debug_names index section.

Tested on x86_64-linux with native, cc-with-gdb-index and cc-with-debug-names.

gdb/testsuite/ChangeLog:

2019-05-04  Tom de Vries  <tdevries@suse.de>

	* lib/gdb.exp (exec_has_index_section): New proc.
	* gdb.base/index-cache.exp: Handle case that binfile contains an index
	section.

---
 gdb/testsuite/gdb.base/index-cache.exp | 30 +++++++++++++++++++++++++-----
 gdb/testsuite/lib/gdb.exp              | 11 +++++++++++
 2 files changed, 36 insertions(+), 5 deletions(-)

diff --git a/gdb/testsuite/gdb.base/index-cache.exp b/gdb/testsuite/gdb.base/index-cache.exp
index 4e583abf01..f5e1e4a850 100644
--- a/gdb/testsuite/gdb.base/index-cache.exp
+++ b/gdb/testsuite/gdb.base/index-cache.exp
@@ -22,6 +22,8 @@ if { [prepare_for_testing "failed to prepare" $testfile $srcfile] } {
     return
 }
 
+set has_index_section [exec_has_index_section $binfile]
+
 # List the files in DIR on the host (where GDB-under-test runs).
 # Return a list of two elements:
 #   - 0 on success, -1 on failure
@@ -125,7 +127,7 @@ proc_with_prefix test_cache_disabled { cache_dir } {
 # Test with the cache enabled, we expect to have exactly one file created.
 
 proc_with_prefix test_cache_enabled_miss { cache_dir } {
-    global testfile
+    global testfile has_index_section
 
     lassign [ls_host $cache_dir] ret files_before
 
@@ -133,7 +135,11 @@ proc_with_prefix test_cache_enabled_miss { cache_dir } {
 
 	lassign [ls_host $cache_dir] ret files_after
 	set nfiles_created [expr [llength $files_after] - [llength $files_before]]
-	gdb_assert "$nfiles_created > 0" "at least one file was created"
+	if { $has_index_section } {
+	    gdb_assert "$nfiles_created == 0" "no file was created"
+	} else {
+	    gdb_assert "$nfiles_created > 0" "at least one file was created"
+	}
 
 	set build_id [get_build_id  [standard_output_file ${testfile}]]
 	if { $build_id == "" } {
@@ -143,11 +149,19 @@ proc_with_prefix test_cache_enabled_miss { cache_dir } {
 
 	set expected_created_file [list "${build_id}.gdb-index"]
 	set found_idx [lsearch -exact $files_after $expected_created_file]
-	gdb_assert "$found_idx >= 0" "expected file is there"
+	if { $has_index_section } {
+	    gdb_assert "$found_idx == -1" "no index cache file generated"
+	} else {
+	    gdb_assert "$found_idx >= 0" "expected file is there"
+	}
 
 	remote_exec host rm "-f $cache_dir/$expected_created_file"
 
-	check_cache_stats 0 1
+	if { $has_index_section } {
+	    check_cache_stats 0 0
+	} else {
+	    check_cache_stats 0 1
+	}
     }
 }
 
@@ -156,6 +170,8 @@ proc_with_prefix test_cache_enabled_miss { cache_dir } {
 # same), but one cache read hit.
 
 proc_with_prefix test_cache_enabled_hit { cache_dir } {
+    global has_index_section
+
     # Just to populate the cache.
     run_test_with_flags $cache_dir on {}
 
@@ -166,7 +182,11 @@ proc_with_prefix test_cache_enabled_hit { cache_dir } {
 	set nfiles_created [expr [llength $files_after] - [llength $files_before]]
 	gdb_assert "$nfiles_created == 0" "no files were created"
 
-	check_cache_stats 1 0
+	if { $has_index_section } {
+	    check_cache_stats 0 0
+	} else {
+	    check_cache_stats 1 0
+	}
     }
 }
 
diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
index 57866daa11..84c54062c8 100644
--- a/gdb/testsuite/lib/gdb.exp
+++ b/gdb/testsuite/lib/gdb.exp
@@ -5107,6 +5107,17 @@ proc rerun_to_main {} {
   }
 }
 
+# Return true if EXECUTABLE contains a .gdb_index or .debug_names index section.
+
+proc exec_has_index_section { executable } {
+    set res [catch {exec readelf -S $executable \
+			| grep -E "\.gdb_index|\.debug_names" }]
+    if { $res == 0 } {
+	return 1
+    }
+    return 0
+}
+
 # Return true if a test should be skipped due to lack of floating
 # point support or GDB can't fetch the contents from floating point
 # registers.