From: George Barrett <bob@bob131.so>
To: gdb-patches@sourceware.org
Subject: [PING] [PATCH] guile: stop procedures on invalid breakpoints
Date: Wed, 09 Jun 2021 05:59:51 +1000 [thread overview]
Message-ID: <hf8thlgt80kn2m9v&xz66l5jx-du&g._gwb/i5v-a8ozixpwgsp6@mail.bob131.so> (raw)
In-Reply-To: <t-n_3dvn7k9q-ybcalaj&/z0xdec4ae7nnndik2rk-4zy_my32us@mail.bob131.so>
Pinging for a review of the documentation changes.
On Thu, May 20, 2021 at 09:28:28AM +1000, George Barrett wrote:
> Stop procedures on <gdb:breakpoint> objects are independent of the
> breakpoints in GDB core: the only reference made to the GDB breakpoint
> pointer in either of `breakpoint-stop' or `set-breakpoint-stop!' is in
> the latter checking to ensure that there hasn't already been a stop
> condition attached from elsewhere. This check is not applicable to
> not-yet-registered <gdb:breakpoint> objects allocated from Scheme.
>
> This commit changes the above-mentioned procedures to accept invalid
> <gdb:breakpoint> objects originating from Scheme; this allows the
> decoupling of the creation of a specific breakpoint object from its
> registration (as well as making the interface less restrictive than it
> needs to be).
>
> gdb/ChangeLog:
>
> 2021-05-20 George Barrett <bob@bob131.so>
>
> * guile/scm-breakpoint.c
> (bpscm_get_valid_or_scm_breakpoint_smob_arg_unsafe): Add
> helper function.
> (gdbscm_breakpoint_stop): Use
> bpscm_get_valid_or_scm_breakpoint_smob_arg_unsafe.
> (gdbscm_set_breakpoint_stop_x): Likewise. Check that bp is
> non-NULL before doing condition string tests.
>
> gdb/doc/ChangeLog:
>
> 2021-05-20 George Barrett <bob@bob131.so>
>
> * guile.texi (Breakpoints In Guile): Add note that
> breakpoint-stop and set-breakpoint-stop! may be used on
> invalid <gdb:breakpoint> objects if they originated from
> Scheme.
>
> gdb/testsuite/ChangeLog:
>
> 2021-05-20 George Barrett <bob@bob131.so>
>
> * gdb.guile/scm-breakpoint.exp (test_bkpt_eval_funcs): Add
> tests for stop procedure manipulation on invalid
> <gdb:breakpoint> objects originating from Scheme.
> Add tests for stop procedure manipulation on valid and invalid
> <gdb:breakpoint> objects originating from GDB core.
> ---
> gdb/doc/guile.texi | 10 ++++++
> gdb/guile/scm-breakpoint.c | 31 +++++++++++++++---
> gdb/testsuite/gdb.guile/scm-breakpoint.exp | 37 +++++++++++++++++++++-
> 3 files changed, 73 insertions(+), 5 deletions(-)
>
> diff --git a/gdb/doc/guile.texi b/gdb/doc/guile.texi
> index c7e43c8d63a..84590eb19bf 100644
> --- a/gdb/doc/guile.texi
> +++ b/gdb/doc/guile.texi
> @@ -3182,6 +3182,11 @@ becomes unconditional.
> @deffn {Scheme Procedure} breakpoint-stop breakpoint
> Return the stop predicate of @var{breakpoint}.
> See @code{set-breakpoint-stop!} below in this section.
> +
> +If @var{breakpoint} was created using @code{make-breakpoint}, this
> +procedure may be used even if @code{breakpoint-valid?} would return
> +@code{#f}. In that case it returns the stop procedure that will be used
> +by @var{breakpoint} once the breakpoint has been registered.
> @end deffn
>
> @deffn {Scheme Procedure} set-breakpoint-stop! breakpoint procedure|#f
> @@ -3215,6 +3220,11 @@ Example @code{stop} implementation:
> (register-breakpoint! bkpt)
> (set-breakpoint-stop! bkpt my-stop?)
> @end smallexample
> +
> +If @var{breakpoint} was created using @code{make-breakpoint}, this
> +procedure may be used even if @code{breakpoint-valid?} would return
> +@code{#f}. In that case @var{procedure} will be the stop procedure for
> +@var{breakpoint} when the breakpoint is registered.
> @end deffn
>
> @deffn {Scheme Procedure} breakpoint-commands breakpoint
> diff --git a/gdb/guile/scm-breakpoint.c b/gdb/guile/scm-breakpoint.c
> index 826dfa9b0a3..4215736ebfe 100644
> --- a/gdb/guile/scm-breakpoint.c
> +++ b/gdb/guile/scm-breakpoint.c
> @@ -326,6 +326,27 @@ bpscm_get_valid_breakpoint_smob_arg_unsafe (SCM self, int arg_pos,
>
> return bp_smob;
> }
> +
> +/* Returns the breakpoint smob in SELF, verifying it's either valid or
> + originates from Scheme.
> + Throws an exception if SELF is not a <gdb:breakpoint> object,
> + or is invalid and not allocated from Scheme. */
> +
> +static breakpoint_smob *
> +bpscm_get_valid_or_scm_breakpoint_smob_arg_unsafe (SCM self, int arg_pos,
> + const char *func_name)
> +{
> + breakpoint_smob *bp_smob
> + = bpscm_get_breakpoint_smob_arg_unsafe (self, arg_pos, func_name);
> +
> + if (!bpscm_is_valid (bp_smob) && !bp_smob->is_scheme_bkpt)
> + {
> + gdbscm_invalid_object_error (func_name, arg_pos, self,
> + _("<gdb:breakpoint>"));
> + }
> +
> + return bp_smob;
> +}
> \f
> /* Breakpoint methods. */
>
> @@ -918,7 +939,8 @@ static SCM
> gdbscm_breakpoint_stop (SCM self)
> {
> breakpoint_smob *bp_smob
> - = bpscm_get_valid_breakpoint_smob_arg_unsafe (self, SCM_ARG1, FUNC_NAME);
> + = bpscm_get_valid_or_scm_breakpoint_smob_arg_unsafe (self, SCM_ARG1,
> + FUNC_NAME);
>
> return bp_smob->stop;
> }
> @@ -930,7 +952,8 @@ static SCM
> gdbscm_set_breakpoint_stop_x (SCM self, SCM newvalue)
> {
> breakpoint_smob *bp_smob
> - = bpscm_get_valid_breakpoint_smob_arg_unsafe (self, SCM_ARG1, FUNC_NAME);
> + = bpscm_get_valid_or_scm_breakpoint_smob_arg_unsafe (self, SCM_ARG1,
> + FUNC_NAME);
> const struct extension_language_defn *extlang = NULL;
>
> SCM_ASSERT_TYPE (gdbscm_is_procedure (newvalue)
> @@ -938,9 +961,9 @@ gdbscm_set_breakpoint_stop_x (SCM self, SCM newvalue)
> newvalue, SCM_ARG2, FUNC_NAME,
> _("procedure or #f"));
>
> - if (bp_smob->bp->cond_string != NULL)
> + if (bp_smob->bp != NULL && bp_smob->bp->cond_string != NULL)
> extlang = get_ext_lang_defn (EXT_LANG_GDB);
> - if (extlang == NULL)
> + if (bp_smob->bp != NULL && extlang == NULL)
> extlang = get_breakpoint_cond_ext_lang (bp_smob->bp, EXT_LANG_GUILE);
> if (extlang != NULL)
> {
> diff --git a/gdb/testsuite/gdb.guile/scm-breakpoint.exp b/gdb/testsuite/gdb.guile/scm-breakpoint.exp
> index 56058942e64..1739793465c 100644
> --- a/gdb/testsuite/gdb.guile/scm-breakpoint.exp
> +++ b/gdb/testsuite/gdb.guile/scm-breakpoint.exp
> @@ -376,10 +376,45 @@ proc_with_prefix test_bkpt_eval_funcs { } {
> "= 4" \
> "check non firing same-location breakpoint eval function was also called at each stop 2"
>
> + # Check that stop funcs can be manipulated on invalid Scheme-created
> + # breakpoints.
> +
> + delete_breakpoints
> + gdb_test "guile (print (breakpoint-valid? eval-bp1))" "= #f" \
> + "check Scheme-created breakpoint is invalid"
> + gdb_scm_test_silent_cmd "guile (set-breakpoint-stop! eval-bp1 (const 'test!))" \
> + "check setting stop procedure on invalid Scheme-created breakpoint"
> + gdb_test "guile (print ((breakpoint-stop eval-bp1)))" "= test!" \
> + "check stop procedure on invalid Scheme-created breakpoint was successfully set"
> +
> + # Check that stop funcs can be manipulated on breakpoint wrappers.
> +
> + gdb_breakpoint "main"
> + gdb_scm_test_silent_cmd "guile (define bp-wrapper (car (breakpoints)))" \
> + "get breakpoint wrapper"
> + gdb_test "guile (print (breakpoint-valid? bp-wrapper))" "= #t" \
> + "check breakpoint wrapper is valid"
> + gdb_scm_test_silent_cmd "guile (set-breakpoint-stop! bp-wrapper (const 'test!))" \
> + "check setting stop procedure on breakpoit wrapper"
> + gdb_test "guile (print ((breakpoint-stop bp-wrapper)))" "= test!" \
> + "check stop procedure on breakpoint wrapper was successfully set"
> +
> + # Check that stop funcs cannot be manipulated on invalid breakpoint
> + # wrappers.
> +
> + delete_breakpoints
> + gdb_test "guile (print (breakpoint-valid? bp-wrapper))" "= #f" \
> + "check breakpoint wrapper is invalid"
> + gdb_test "guile (set-breakpoint-stop! bp-wrapper (const 'test!))" \
> + "ERROR:.*Invalid object: <gdb:breakpoint>.*" \
> + "check stop procedure cannot be set on invalid breakpoint wrapper"
> + gdb_test "guile (breakpoint-stop bp-wrapper)" \
> + "ERROR:.*Invalid object: <gdb:breakpoint>.*" \
> + "check stop procedure cannot be retrieved from invalid breakpoint wrapper"
> +
> # Check we cannot assign a condition to a breakpoint with a stop-func,
> # and cannot assign a stop-func to a breakpoint with a condition.
>
> - delete_breakpoints
> set cond_bp [gdb_get_line_number "Break at multiply."]
> gdb_scm_test_silent_cmd "guile (define eval-bp1 (make-bp-eval \"$cond_bp\"))" \
> "create eval-bp1 breakpoint 2"
> --
> 2.31.1
next prev parent reply other threads:[~2021-06-08 20:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-19 23:28 George Barrett
2021-05-20 10:32 ` Andrew Burgess
2021-05-20 14:52 ` George Barrett
2021-06-08 19:59 ` George Barrett [this message]
2021-06-09 11:43 ` [PING] " Eli Zaretskii
2021-06-09 13:51 ` George Barrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='hf8thlgt80kn2m9v&xz66l5jx-du&g._gwb/i5v-a8ozixpwgsp6@mail.bob131.so' \
--to=bob@bob131.so \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).