[binutils-gdb] Use consistent types for holding instructions, instruction masks, etc.

[binutils-gdb] Use consistent types for holding instructions, instruction masks, etc.

[sergiodj+buildbot]

*** TEST RESULTS FOR COMMIT 0f873fd58b51a2906f31bb445ab685da04a1be23 ***

Author: Peter Bergner <bergner@vnet.ibm.com>
Branch: master
Commit: 0f873fd58b51a2906f31bb445ab685da04a1be23

Use consistent types for holding instructions, instruction masks, etc.

include/
	* opcode/ppc.h (PPC_INT_FMT): Define.
	(struct powerpc_opcode) <opcode>: Update type.
	(struct powerpc_opcode) <mask>: Likewise.
	(struct powerpc_opcode) <bitm>: Likewise.
	(struct powerpc_opcode) <insert>: Likewise.
	(struct powerpc_opcode) <extract>: Likewise.
	(ppc_optional_operand_value): Likewise.

gas/
	* config/tc-ppc.c (last_insn): Update type.
	(insn_validate) <omask, mask>: Likewise.
	(ppc_setup_opcodes) <mask, right_bit>: Likewise.
	<PRINT_OPCODE_TABLE>: Update types and printf format specifiers.
	(ppc_insert_operand): Update return and argument types and remove
	unneeded type casts.
	<min, max, right, tmp>: Update type.
	(md_assemble): Remove unneeded type casts.
	<insn, val, tmp_insn>: Update type.

opcodes/
	* opcodes/ppc-dis.c (disassemble_init_powerpc): Fix white space.
	(operand_value_powerpc): Update return and argument type.
	<value, top>: Update type.
	(skip_optional_operands): Update argument type.
	(lookup_powerpc): Likewise.
	(lookup_vle): Likewise.
	<table_opcd, table_mask, insn2>: Update type.
	(lookup_spe2): Update argument type.
	<table_opcd, table_mask, insn2>: Update type.
	(print_insn_powerpc) <insn, value>: Update type.
	Use PPC_INT_FMT for printing instructions and operands.
	* opcodes/ppc-opc.c (insert_arx, extract_arx, insert_ary, extract_ary,
	insert_rx, extract_rx, insert_ry, extract_ry, insert_bat, extract_bat,
	insert_bba, extract_bba, insert_bdm, extract_bdm, insert_bdp,
	extract_bdp, valid_bo_pre_v2, valid_bo_post_v2, valid_bo, insert_bo,
	extract_bo, insert_boe, extract_boe, insert_dcmxs, extract_dcmxs,
	insert_dxd, extract_dxd, insert_dxdn, extract_dxdn, insert_fxm,
	extract_fxm, insert_li20, extract_li20, insert_ls, extract_ls,
	insert_esync, extract_esync, insert_mbe, extract_mbe, insert_mb6,
	extract_mb6, extract_nb, insert_nbi, insert_nsi, extract_nsi,
	insert_ral, extract_ral, insert_ram, extract_ram, insert_raq,
	extract_raq, insert_ras, extract_ras, insert_rbs, extract_rbs,
	insert_rbx, extract_rbx, insert_sci8, extract_sci8, insert_sci8n,
	extract_sci8n, insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w,
	insert_oimm, extract_oimm, insert_sh6, extract_sh6, insert_spr,
	extract_spr, insert_sprg, extract_sprg, insert_tbr, extract_tbr,
	insert_xt6, extract_xt6, insert_xtq6, extract_xtq6, insert_xa6,
	extract_xa6, insert_xb6, extract_xb6, insert_xb6s, extract_xb6s,
	insert_xc6, extract_xc6, insert_dm, extract_dm, insert_vlesi,
	extract_vlesi, insert_vlensi, extract_vlensi, insert_vleui,
	extract_vleui, insert_vleil, extract_vleil, insert_evuimm1_ex0,
	extract_evuimm1_ex0, insert_evuimm2_ex0, extract_evuimm2_ex0,
	insert_evuimm4_ex0, extract_evuimm4_ex0, insert_evuimm8_ex0,
	extract_evuimm8_ex0, insert_evuimm_lt8, extract_evuimm_lt8,
	insert_evuimm_lt16, extract_evuimm_lt16, insert_rD_rS_even,
	extract_rD_rS_even, insert_off_lsp, extract_off_lsp, insert_off_spe2,
	extract_off_spe2, insert_Ddd, extract_Ddd): Update types.
	(OP, OPTO, OPL, OPVUP, OPVUPRT, A, AFRALFRC_MASK, B, BD8, BD8IO, BD15,
	BD24, BBO, Y_MASK  , AT1_MASK, AT2_MASK, BBOCB, C_LK, C, CTX, UCTX,
	DX, EVSEL, IA16, I16A, I16L, IM7, LI20, MME, MD, MDS, SC, SC_MASK,
	SCI8, SCI8BF, SD4, SE_IM5, SE_R, SE_RR, VX, VX_LSP, VX_RA_CONST,
	VX_RB_CONST, VX_SPE_CRFD, VX_SPE2_CLR, VX_SPE2_SPLATB, VX_SPE2_OCTET,
	VX_SPE2_DDHH, VX_SPE2_HH, VX_SPE2_EVMAR, VX_SPE2_EVMAR_MASK, VXA,
	VXR, VXASH, X, EX, XX2, XX3, XX3RC, XX4, Z, XWRA_MASK, XLRT_MASK,
	XRLARB_MASK, XLRAND_MASK, XRTLRA_MASK, XRTLRARB_MASK, XRTARARB_MASK,
	XRTBFRARB_MASK, XOPL, XOPL2, XRCL, XRT, XRTRA, XCMP_MASK, XCMPL_MASK,
	XTO, XTLB, XSYNC, XEH_MASK, XDSS, XFL, XISEL, XL, XLO, XLYLK, XLOCB,
	XMBAR, XO, XOPS, XS, XFXM, XSPR, XUC, XW, APU): Update types in casts.

Failures on Fedora-i686, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/8230>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-i686/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
new FAIL: gdb.gdb/complaints.exp: breakpoint in captured_command_loop
new FAIL: gdb.gdb/complaints.exp: run until breakpoint at captured_command_loop
new FAIL: gdb.gdb/observer.exp: breakpoint in captured_main
new FAIL: gdb.gdb/observer.exp: run until breakpoint at captured_main
new FAIL: gdb.gdb/python-interrupts.exp: breakpoint in captured_command_loop
new FAIL: gdb.gdb/python-interrupts.exp: run until breakpoint at captured_command_loop
new FAIL: gdb.gdb/python-selftest.exp: breakpoint in captured_command_loop
new FAIL: gdb.gdb/python-selftest.exp: run until breakpoint at captured_command_loop
new FAIL: gdb.gdb/selftest.exp: breakpoint in captured_main
new FAIL: gdb.gdb/selftest.exp: run until breakpoint at captured_main
PASS -> FAIL: gdb.linespec/cpls-abi-tag.exp: test_abi_tag: completion: at tag: tab complete "b test_abi_tag_function[abi:"
PASS -> FAIL: gdb.linespec/cpls-abi-tag.exp: test_abi_tag: completion: at tag: cmd complete "b test_abi_tag_function[abi:"
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-i686/xfails/master/xfail;hb=4a17cb2>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-i686/xfails/master/xfail.table;hb=4a17cb2>

Failures on Fedora-x86_64-native-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m32/builds/8192>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-gdbserver-m32/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-x86_64-native-gdbserver-m32/xfails/master/xfail;hb=a09e502>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-x86_64-native-gdbserver-m32/xfails/master/xfail.table;hb=a09e502>

Failures on Fedora-x86_64-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m64/builds/8248>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-m64/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/non-ldr-exit.exp: program exits normally
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-x86_64-m64/xfails/master/xfail;hb=f7c5eef>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-x86_64-m64/xfails/master/xfail.table;hb=f7c5eef>

Failures on Fedora-x86_64-native-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/8189>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-gdbserver-m64/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-x86_64-native-gdbserver-m64/xfails/master/xfail;hb=596c65b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-x86_64-native-gdbserver-m64/xfails/master/xfail.table;hb=596c65b>

Failures on Fedora-x86_64-native-extended-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m64/builds/8234>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m64/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
new FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=main: force-fail=1: run failure detected
new FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=separate: force-fail=1: run failure detected
new FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=main: force-fail=1: run failure detected
new FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=1: run failure detected
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-x86_64-native-extended-gdbserver-m64/xfails/master/xfail;hb=ae6cdc5>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-x86_64-native-extended-gdbserver-m64/xfails/master/xfail.table;hb=ae6cdc5>

Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/8196>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m32/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
new FAIL: gdb.base/corefile.exp: core-file warning-free
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-x86_64-native-extended-gdbserver-m32/xfails/master/xfail;hb=75ea3e5>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-x86_64-native-extended-gdbserver-m32/xfails/master/xfail.table;hb=75ea3e5>

Failures on Ubuntu-AArch32-native-extended-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-extended-gdbserver-m32/builds/2284>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-extended-gdbserver-m32/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: next does not change thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: current thread advanced - unlocked
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: other threads ran - unlocked
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-s390x-m64, branch master

[sergiodj+buildbot]

Buildslave:
	marist-fedora-s390x

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/7203>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-s390x-m64/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: other threads ran - unlocked
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-s390x-m64/xfails/master/xfail;hb=5cc2d8c>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Fedora-s390x-m64/xfails/master/xfail.table;hb=5cc2d8c>

Failures on Ubuntu-AArch64-m64, branch master

[sergiodj+buildbot]

Buildslave:
	ubuntu-aarch64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch64-m64/builds/3691>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch64-m64/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/non-ldr-exit.exp: program exits normally
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Ubuntu-AArch64-m64/xfails/master/xfail;hb=2289e31>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Ubuntu-AArch64-m64/xfails/master/xfail.table;hb=2289e31>

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/2266>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Ubuntu-AArch32-native-gdbserver-m32/xfails/master/xfail;hb=>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Ubuntu-AArch32-native-gdbserver-m32/xfails/master/xfail.table;hb=>

Failures on Ubuntu-AArch32-m32, branch master

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-m32/builds/2285>

Commit(s) tested:
	0f873fd58b51a2906f31bb445ab685da04a1be23

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Use consistent types for holding instructions, instruction masks, etc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-m32/0f/0f873fd58b51a2906f31bb445ab685da04a1be23/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/non-ldr-exit.exp: program exits normally
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Ubuntu-AArch32-m32/xfails/master/xfail;hb=>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Ubuntu-AArch32-m32/xfails/master/xfail.table;hb=>