[binutils-gdb] Use gdbpy_enter in cmdpy_function

[binutils-gdb] Use gdbpy_enter in cmdpy_function

[sergiodj+buildbot]

*** TEST RESULTS FOR COMMIT 12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944 ***

Author: Tom Tromey <tom@tromey.com>
Branch: master
Commit: 12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Use gdbpy_enter in cmdpy_function

This changes cmdpy_function to use gdbpy_enter and gdbpy_ref.

2017-01-10  Tom Tromey  <tom@tromey.com>

	* python/py-cmd.c (cmdpy_function): Use gdbpy_enter, gdbpy_ref.

Failures on Fedora-s390x-m64, branch master

[sergiodj+buildbot]

Buildslave:
	marist-fedora-s390x

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/4526>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-s390x-m64/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
new FAIL: gdb.python/py-mi-objfile.exp: verify python support
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m32/builds/5204>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-gdbserver-m32/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-extended-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m64/builds/5226>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m64/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/5201>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m32/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/5195>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-gdbserver-m64/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-i686, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/5224>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-i686/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m64/builds/5240>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-m64/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-cc-with-index, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/5177>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-cc-with-index/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch64-m64, branch master

[sergiodj+buildbot]

Buildslave:
	ubuntu-aarch64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch64-m64/builds/1222>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch64-m64/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: killed outside: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-extended-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-extended-gdbserver-m64/builds/3666>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-extended-gdbserver-m64/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 2: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 2: detach
new FAIL: gdb.threads/attach-into-signal.exp: threaded: process is still running on the attempt # 3 of 100
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/3658>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4860>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-ppc64be-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-m64/builds/4895>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-ppc64be-m64/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/paginate-execution-startup.exp: cancel with ctrl-c: GDB accepts further input
PASS -> FAIL: gdb.base/paginate-execution-startup.exp: cancel with ctrl-c: set height unlimited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-ppc64be-native-extended-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-extended-gdbserver-m64/builds/4877>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-ppc64be-native-extended-gdbserver-m64/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

Failures on Fedora-ppc64le-cc-with-index, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/4784>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-ppc64le-cc-with-index/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
new FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.arch/altivec-regs.exp: info reg vscr
new FAIL: gdb.arch/altivec-regs.exp: print vscr
new FAIL: gdb.arch/altivec-regs.exp: info vector
new FAIL: gdb.base/catch-syscall.exp: execve: syscall execve has returned
new FAIL: gdb.base/catch-syscall.exp: execve: continue to main
new FAIL: gdb.base/catch-syscall.exp: execve: continue until exit
new FAIL: gdb.base/checkpoint.exp: exit, dropped into next fork one
new FAIL: gdb.base/checkpoint.exp: exit, dropped into next fork two
new FAIL: gdb.base/checkpoint.exp: exit, dropped into next fork three
new FAIL: gdb.base/checkpoint.exp: exit, dropped into next fork four
new FAIL: gdb.base/checkpoint.exp: exit, dropped into next fork five
new FAIL: gdb.base/checkpoint.exp: info checkpoints two
new FAIL: gdb.base/checkpoint.exp: kill all one
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 0
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 1
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 2
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 3
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 4
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 5
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 6
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 7
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 8
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 9
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 10
new FAIL: gdb.base/checkpoint-ns.exp: exit, dropped into next fork one
new FAIL: gdb.base/checkpoint-ns.exp: exit, dropped into next fork two
new FAIL: gdb.base/checkpoint-ns.exp: exit, dropped into next fork three
new FAIL: gdb.base/checkpoint-ns.exp: exit, dropped into next fork four
new FAIL: gdb.base/checkpoint-ns.exp: exit, dropped into next fork five
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: kill all one
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 0
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 1
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 2
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 3
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 4
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 5
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 6
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 7
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 8
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 9
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 10
new FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp
new FAIL: gdb.base/display.exp: info disp
new FAIL: gdb.base/display.exp: next hit
new FAIL: gdb.base/display.exp: disp *p_i
new FAIL: gdb.base/display.exp: p p_i = 0x0
new FAIL: gdb.base/display.exp: display bad address
new FAIL: gdb.base/display.exp: p p_i = &i
new FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off
new FAIL: gdb.base/display.exp: finish
new FAIL: gdb.base/display.exp: step
new FAIL: gdb.base/display.exp: cont
new FAIL: gdb.base/display.exp: printf "%d%d",i
new FAIL: gdb.base/display.exp: print/k j
new FAIL: gdb.base/display.exp: debug test output 1
new FAIL: gdb.base/display.exp: debug test output 1a
new FAIL: gdb.base/display.exp: debug test output 2
new FAIL: gdb.base/display.exp: debug test output 2a
new FAIL: gdb.base/display.exp: debug test output 3
new FAIL: gdb.base/display.exp: x/0 j
new FAIL: gdb.base/display.exp: ignored s
new FAIL: gdb.base/display.exp: print/a $pc
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
new FAIL: gdb.base/jit-so.exp: one_jit_test-2: info function jit_function
new FAIL: gdb.base/pr11022.exp: watchpoint hit
new FAIL: gdb.base/pr11022.exp: watchpoint hit 2
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
new FAIL: gdb.base/value-double-free.exp: continue
new FAIL: gdb.base/value-double-free.exp: print empty
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
new FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
new FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints
new FAIL: gdb.base/watchpoint.exp: trigger local watch
new FAIL: gdb.base/watchpoint.exp: self-delete local watch
new FAIL: gdb.base/watchpoint.exp: set static local watch
new FAIL: gdb.base/watchpoint.exp: trigger static local watch
new FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint
new FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit
new FAIL: gdb.base/watchpoint.exp: watch $pc
new FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
new FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here
new FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4
new FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
new FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoints.exp: watchpoint hit count is 1
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoints.exp: watchpoint hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoints.exp: watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoints.exp: watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5
new FAIL: gdb.compile/compile.exp: test abbreviations and code delimiter
new FAIL: gdb.compile/compile.exp: Test abbreviations and code collision
new FAIL: gdb.compile/compile.exp: test delimiter with -r
new FAIL: gdb.compile/compile.exp: test delimiter with -raw
new FAIL: gdb.compile/compile.exp: test delimiter with -r after it
new FAIL: gdb.compile/compile.exp: set variable without trailing semicolon
new FAIL: gdb.compile/compile.exp: check variable without trailing semicolon
new FAIL: gdb.compile/compile.exp: set variable from macro
new FAIL: gdb.compile/compile.exp: expect 23
new FAIL: gdb.compile/compile.exp: set variable from function-like macro
new FAIL: gdb.compile/compile.exp: expect -1
new FAIL: gdb.compile/compile.exp: set variable
new FAIL: gdb.compile/compile.exp: expect 42
new FAIL: gdb.compile/compile.exp: modify variable
new FAIL: gdb.compile/compile.exp: expect 84
new FAIL: gdb.compile/compile.exp: compile code multiline 4
new FAIL: gdb.compile/compile.exp: expect 20
new FAIL: gdb.compile/compile.exp: use external source file
new FAIL: gdb.compile/compile.exp: expect 7
new FAIL: gdb.compile/compile.exp: call static function
new FAIL: gdb.compile/compile.exp: expect 9
new FAIL: gdb.compile/compile.exp: call global function
new FAIL: gdb.compile/compile.exp: expect 8
new FAIL: gdb.compile/compile.exp: compute size of ulonger
new FAIL: gdb.compile/compile.exp: check size of ulonger
new FAIL: gdb.compile/compile.exp: compute size of longer
new FAIL: gdb.compile/compile.exp: check size of longer
new FAIL: gdb.compile/compile.exp: compile code globalvar = MINUS_1
new FAIL: gdb.compile/compile.exp: check MINUS_1
new FAIL: gdb.compile/compile.exp: compile code globalvar = static_local
new FAIL: gdb.compile/compile.exp: check static_local
new FAIL: gdb.compile/compile.exp: do not keep jit in memory
new FAIL: gdb.compile/compile.exp: compile code func_doesnotexist
new FAIL: gdb.compile/compile.exp: compile code segfault first
new FAIL: gdb.compile/compile.exp: bt
new FAIL: gdb.compile/compile.exp: info sym found
new FAIL: gdb.compile/compile.exp: return
new FAIL: gdb.compile/compile.exp: info sym not found
new FAIL: gdb.compile/compile.exp: compile code segfault second
new FAIL: gdb.compile/compile.exp: set localvar
new FAIL: gdb.compile/compile.exp: expect 12
new FAIL: gdb.compile/compile.exp: modify localvar
new FAIL: gdb.compile/compile.exp: expect 24
new FAIL: gdb.compile/compile.exp: test shadowing
new FAIL: gdb.compile/compile.exp: expect 52
new FAIL: gdb.compile/compile.exp: compile code localvar = externed
new FAIL: gdb.compile/compile.exp: test extern in inner scope
new FAIL: gdb.compile/compile.exp: compile code vla[2] = 7
new FAIL: gdb.compile/compile.exp: p vla[2]
new FAIL: gdb.compile/compile.exp: compile code localvar =
new FAIL: gdb.compile/compile.exp: p localvar
new FAIL: gdb.compile/compile.exp: compile code struct_object.selffield = &struct_object
new FAIL: gdb.compile/compile.exp: print struct_object.selffield == &struct_object
new FAIL: gdb.compile/compile.exp: compile code struct_object.charfield = 1
new FAIL: gdb.compile/compile.exp: print struct_object.charfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.ucharfield = 1
new FAIL: gdb.compile/compile.exp: print struct_object.ucharfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.shortfield = -5
new FAIL: gdb.compile/compile.exp: print struct_object.shortfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.ushortfield = 5
new FAIL: gdb.compile/compile.exp: print struct_object.ushortfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.intfield = -7
new FAIL: gdb.compile/compile.exp: print struct_object.intfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.uintfield = 7
new FAIL: gdb.compile/compile.exp: print struct_object.uintfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.bitfield = 2
new FAIL: gdb.compile/compile.exp: print struct_object.bitfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.longfield = -9
new FAIL: gdb.compile/compile.exp: print struct_object.longfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.ulongfield = 9
new FAIL: gdb.compile/compile.exp: print struct_object.ulongfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.enumfield = ONE
new FAIL: gdb.compile/compile.exp: print struct_object.enumfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.floatfield = 1
new FAIL: gdb.compile/compile.exp: print struct_object.floatfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.doublefield = 2
new FAIL: gdb.compile/compile.exp: print struct_object.doublefield
new FAIL: gdb.compile/compile.exp: compile code struct_object.arrayfield[2] = 7
new FAIL: gdb.compile/compile.exp: print struct_object.arrayfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.complexfield = 7 + 5i
new FAIL: gdb.compile/compile.exp: print struct_object.complexfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.boolfield = 1
new FAIL: gdb.compile/compile.exp: print struct_object.boolfield
new FAIL: gdb.compile/compile.exp: compile code struct_object.vectorfield[2] = 7
new FAIL: gdb.compile/compile.exp: print struct_object.vectorfield
new FAIL: gdb.compile/compile.exp: compile code union_object.typedeffield = 7
new FAIL: gdb.compile/compile.exp: print union_object.typedeffield
new FAIL: gdb.compile/compile.exp: print union_object.intfield
new FAIL: gdb.compile/compile.exp: print unresolved value
new FAIL: gdb.compile/compile.exp: compile code globalshadow += 1;
new FAIL: gdb.compile/compile.exp: print globalshadow
new FAIL: gdb.compile/compile.exp: compile code extern int globalshadow; globalshadow += 5;
new FAIL: gdb.compile/compile.exp: print 'compile.c'::globalshadow
new FAIL: gdb.compile/compile.exp: print globalshadow second time
new FAIL: gdb.compile/compile.exp: compile code staticshadow += 2;
new FAIL: gdb.compile/compile.exp: print staticshadow
new FAIL: gdb.compile/compile.exp: compile code -r multiline 4
new FAIL: gdb.compile/compile.exp: check globalshadow with -r
new FAIL: gdb.compile/compile.exp: pointer to jit function
new FAIL: gdb.compile/compile.exp: set variable to 77
new FAIL: gdb.compile/compile.exp: expect 77
new FAIL: gdb.compile/compile.exp: call func_nodebug
new FAIL: gdb.compile/compile.exp: expect -75
new FAIL: gdb.compile/compile.exp: call func_nodebug indirectly
new FAIL: gdb.compile/compile.exp: expect -76
new FAIL: gdb.compile/compile.exp: compile code static const int readonly = 1; *
new FAIL: gdb.compile/compile.exp: compile code union union_type newdecl_u
new FAIL: gdb.compile/compile.exp: compile code struct struct_type newdecl_s
new FAIL: gdb.compile/compile.exp: compile code inttypedef newdecl_i
new FAIL: gdb.compile/compile.exp: call shared library function
new FAIL: gdb.compile/compile.exp: expect 1
new FAIL: gdb.compile/compile.exp: modify shared library variable
new FAIL: gdb.compile/compile.exp: expect 15
new FAIL: gdb.compile/compile-ifunc.exp: nodebug: compile code resultvar = gnu_ifunc
new FAIL: gdb.compile/compile-ifunc.exp: nodebug: p resultvar
new FAIL: gdb.compile/compile-ifunc.exp: debug: compile code resultvar = gnu_ifunc_alias
new FAIL: gdb.compile/compile-ifunc.exp: debug: p resultvar
new FAIL: gdb.compile/compile-ops.exp: compile code
new FAIL: gdb.compile/compile-ops.exp: compile code optimized_out
new FAIL: gdb.compile/compile-print.exp: compile print varint
new FAIL: gdb.compile/compile-print.exp: compile print vararray
new FAIL: gdb.compile/compile-print.exp: compile print main
new FAIL: gdb.compile/compile-print.exp: compile print *vararray@3
new FAIL: gdb.compile/compile-print.exp: compile print *vararrayp@3
new FAIL: gdb.compile/compile-print.exp: compile print/x 256
new FAIL: gdb.compile/compile-print.exp: print $
new FAIL: gdb.compile/compile-print.exp: compile print varobject
new FAIL: gdb.compile/compile-setjmp.exp: compile file -r
new FAIL: gdb.compile/compile-setjmp.exp: p done
new FAIL: gdb.compile/compile-tls.exp: compile code local_scope = 1
new FAIL: gdb.compile/compile-tls.exp: print local_scope
new FAIL: gdb.compile/compile-tls.exp: compile code static_scope = 2
new FAIL: gdb.compile/compile-tls.exp: print static_scope
new FAIL: gdb.compile/compile-tls.exp: compile code global_scope = 3
new FAIL: gdb.compile/compile-tls.exp: print global_scope
new FAIL: gdb.cp/annota2.exp: watch triggered on a.x
new FAIL: gdb.cp/annota2.exp: annotate-quit
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x
new FAIL: gdb.cp/annota3.exp: annotate-quit
new FAIL: gdb.cp/gdb2495.exp: call a function that raises an exception without a handler.
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame
new FAIL: gdb.cp/gdb2495.exp: info breakpoints
new FAIL: gdb.cp/gdb2495.exp: set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: turn off unwind on terminating exception flag
new FAIL: gdb.cp/gdb2495.exp: call a function that raises an exception with unwinding off..
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints
new FAIL: gdb.cp/no-dmgl-verbose.exp: setting breakpoint at 'f
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.go/methods.exp: setting breakpoint at main.T.Foo
new FAIL: gdb.go/methods.exp: setting breakpoint at
new FAIL: gdb.guile/scm-breakpoint.exp: test_watchpoints: test watchpoint write
new FAIL: gdb.guile/scm-breakpoint.exp: test_bkpt_internal: test invisible watchpoint write
new FAIL: gdb.guile/scm-breakpoint.exp: test_bkpt_eval_funcs: test watchpoint write
new FAIL: gdb.guile/scm-symtab.exp: test find-pc-line with resume address
new FAIL: gdb.mi/mi-watch.exp: mi-mode=main: wp-type=hw: watchpoint trigger
new FAIL: gdb.mi/mi-watch.exp: mi-mode=separate: wp-type=hw: watchpoint trigger
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2
new FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: void_func
new FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: char_func
new FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: short_func
new FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: int_func
new FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: long_func
new FAIL: gdb.reverse/finish-precsave.exp: reverse finish from long_long_func
new FAIL: gdb.reverse/finish-precsave.exp: reverse finish from long_func
new FAIL: gdb.reverse/finish-precsave.exp: reverse finish from int_func
new FAIL: gdb.reverse/finish-precsave.exp: reverse finish from short_func
new FAIL: gdb.reverse/finish-precsave.exp: reverse finish from char_func
new FAIL: gdb.reverse/finish-precsave.exp: reverse finish from void_func
new FAIL: gdb.reverse/finish-reverse-bkpt.exp: reverse-finish from void_func trips breakpoint at entry
new FAIL: gdb.reverse/finish-reverse-bkpt.exp: no spurious proceed after breakpoint stop
new FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: void_func
new FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: char_func
new FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: short_func
new FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: int_func
new FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: long_func
new FAIL: gdb.reverse/finish-reverse.exp: reverse finish from long_long_func
new FAIL: gdb.reverse/finish-reverse.exp: reverse finish from long_func
new FAIL: gdb.reverse/finish-reverse.exp: reverse finish from int_func
new FAIL: gdb.reverse/finish-reverse.exp: reverse finish from short_func
new FAIL: gdb.reverse/finish-reverse.exp: reverse finish from char_func
new FAIL: gdb.reverse/finish-reverse.exp: reverse finish from void_func
new FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
new FAIL: gdb.reverse/next-reverse-bkpt-over-sr.exp: reverse-next over call trips user breakpoint at function entry
new FAIL: gdb.reverse/next-reverse-bkpt-over-sr.exp: stopped at the right callee call
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: detach: detach: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: detach: detach: detach
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: detach: watchpoint: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: detach: watchpoint: detach
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: detach: killed outside: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: detach: killed outside: detach
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: continue
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: killed outside: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: killed outside: continue
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: detach: detach: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: detach: detach: detach child
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: detach: watchpoint: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: detach: watchpoint: detach child
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: detach: killed outside: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: detach: killed outside: detach child
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: detach: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: detach: detach child
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: detach child
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: killed outside: continue to breakpoint: _exit
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: killed outside: detach child
new FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: killed outside: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
new FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: singlethread watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: multithreaded watchpoints work at A
new FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: multithreaded watchpoints work at B
new FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: breakpoint
new FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: watchpoint A after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: watchpoint B after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: watchpoint A after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: watchpoint B after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: multithreaded: finish
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchpoint-fork.exp: child: multithreaded: singlethread watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: child: multithreaded: multithreaded watchpoints work at A
new FAIL: gdb.threads/watchpoint-fork.exp: child: multithreaded: multithreaded watchpoints work at B
new FAIL: gdb.threads/watchpoint-fork.exp: child: multithreaded: breakpoint
new FAIL: gdb.threads/watchpoint-fork.exp: child: multithreaded: watchpoint A after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: multithreaded: watchpoint B after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: multithreaded: watchpoint A after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: multithreaded: watchpoint B after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: multithreaded: finish
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.