public inbox for gdb-testers@sourceware.org
help / color / mirror / Atom feed
* [binutils-gdb] Use class to manage BFD reference counts
@ 2017-01-12 6:35 sergiodj+buildbot
2017-01-12 6:35 ` Failures on Fedora-s390x-m64, branch master sergiodj+buildbot
` (10 more replies)
0 siblings, 11 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-12 6:35 UTC (permalink / raw)
To: gdb-testers
*** TEST RESULTS FOR COMMIT 192b62ce0b4bb5c61188f570e127a26d2c32f716 ***
Author: Tom Tromey <tom@tromey.com>
Branch: master
Commit: 192b62ce0b4bb5c61188f570e127a26d2c32f716
Use class to manage BFD reference counts
This introduces a new specialization of gdb::ref_ptr that can be used
to manage BFD reference counts. Then it changes most places in gdb to
use this new class, rather than explicit reference-counting or
cleanups. This patch removes make_cleanup_bfd_unref.
If you look you will see a couple of spots using "release" where a use
of gdb_bfd_ref_ptr would be cleaner. These will be fixed in the next
patch.
I think this patch fixes some latent bugs. For example, it seems to
me that previously objfpy_add_separate_debug_file leaked a BFD.
I'm not 100% certain that the macho_symfile_read_all_oso change is
correct. The existing code here is hard for me to follow. One goal
of this sort of automated reference counting, though, is to make it
more difficult to make logic errors; so hopefully the code is clear
now.
2017-01-10 Tom Tromey <tom@tromey.com>
* windows-tdep.c (windows_xfer_shared_library): Update.
* windows-nat.c (windows_make_so): Update.
* utils.h (make_cleanup_bfd_unref): Remove.
* utils.c (do_bfd_close_cleanup, make_cleanup_bfd_unref): Remove.
* symfile.h (symfile_bfd_open)
(find_separate_debug_file_in_section): Return gdb_bfd_ref_ptr.
* symfile.c (read_symbols, symbol_file_add)
(separate_debug_file_exists): Update.
(symfile_bfd_open): Return gdb_bfd_ref_ptr.
(generic_load, reread_symbols): Update.
* symfile-mem.c (symbol_file_add_from_memory): Update.
* spu-linux-nat.c (spu_bfd_open): Return gdb_bfd_ref_ptr.
(spu_symbol_file_add_from_memory): Update.
* solist.h (struct target_so_ops) <bfd_open>: Return
gdb_bfd_ref_ptr.
(solib_bfd_fopen, solib_bfd_open): Return gdb_bfd_ref_ptr.
* solib.c (solib_bfd_fopen, solib_bfd_open): Return
gdb_bfd_ref_ptr.
(solib_map_sections, reload_shared_libraries_1): Update.
* solib-svr4.c (enable_break): Update.
* solib-spu.c (spu_bfd_fopen): Return gdb_bfd_ref_ptr.
* solib-frv.c (enable_break2): Update.
* solib-dsbt.c (enable_break): Update.
* solib-darwin.c (gdb_bfd_mach_o_fat_extract): Return
gdb_bfd_ref_ptr.
(darwin_solib_get_all_image_info_addr_at_init): Update.
(darwin_bfd_open): Return gdb_bfd_ref_ptr.
* solib-aix.c (solib_aix_bfd_open): Return gdb_bfd_ref_ptr.
* record-full.c (record_full_save): Update.
* python/py-objfile.c (objfpy_add_separate_debug_file): Update.
* procfs.c (insert_dbx_link_bpt_in_file): Update.
* minidebug.c (find_separate_debug_file_in_section): Return
gdb_bfd_ref_ptr.
* machoread.c (macho_add_oso_symfile): Change abfd to
gdb_bfd_ref_ptr.
(macho_symfile_read_all_oso): Update.
(macho_check_dsym): Return gdb_bfd_ref_ptr.
(macho_symfile_read): Update.
* jit.c (bfd_open_from_target_memory): Return gdb_bfd_ref_ptr.
(jit_bfd_try_read_symtab): Update.
* gdb_bfd.h (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
(gdb_bfd_ref_policy): New struct.
(gdb_bfd_ref_ptr): New typedef.
* gdb_bfd.c (gdb_bfd_open, gdb_bfd_fopen, gdb_bfd_openr)
(gdb_bfd_openw, gdb_bfd_openr_iovec)
(gdb_bfd_openr_next_archived_file, gdb_bfd_fdopenr): Return
gdb_bfd_ref_ptr.
* gcore.h (create_gcore_bfd): Return gdb_bfd_ref_ptr.
* gcore.c (create_gcore_bfd): Return gdb_bfd_ref_ptr.
(gcore_command): Update.
* exec.c (exec_file_attach): Update.
* elfread.c (elf_symfile_read): Update.
* dwarf2read.c (dwarf2_get_dwz_file): Update.
(try_open_dwop_file, open_dwo_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwo_file): Update.
(open_dwp_file): Return gdb_bfd_ref_ptr.
(open_and_init_dwp_file): Update.
* corelow.c (core_open): Update.
* compile/compile-object-load.c (compile_object_load): Update.
* common/gdb_ref_ptr.h (ref_ptr::operator->): New operator.
* coffread.c (coff_symfile_read): Update.
* cli/cli-dump.c (bfd_openr_or_error, bfd_openw_or_error): Return
gdb_bfd_ref_ptr. Rename.
(dump_bfd_file, restore_command): Update.
* build-id.h (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
* build-id.c (build_id_to_debug_bfd): Return gdb_bfd_ref_ptr.
(find_separate_debug_file_by_buildid): Update.
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Fedora-s390x-m64, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
@ 2017-01-12 6:35 ` sergiodj+buildbot
2017-01-13 2:18 ` Failures on Fedora-x86_64-native-gdbserver-m32, " sergiodj+buildbot
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-12 6:35 UTC (permalink / raw)
To: gdb-testers
Buildslave:
marist-fedora-s390x
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/4553>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Fedora-s390x-m64/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
============================
*** Complete list of XFAILs for this builder ***
FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST. PLEASE CONTACT THE BUILDBOT ADMIN.
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Fedora-x86_64-native-gdbserver-m32, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
2017-01-12 6:35 ` Failures on Fedora-s390x-m64, branch master sergiodj+buildbot
@ 2017-01-13 2:18 ` sergiodj+buildbot
2017-01-13 2:31 ` Failures on Fedora-x86_64-native-extended-gdbserver-m64, " sergiodj+buildbot
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-13 2:18 UTC (permalink / raw)
To: gdb-testers
Buildslave:
fedora-x86-64-3
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m32/builds/5231>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-gdbserver-m32/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/interrupt.exp: continue
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================
*** Complete list of XFAILs for this builder ***
FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST. PLEASE CONTACT THE BUILDBOT ADMIN.
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Fedora-x86_64-native-extended-gdbserver-m64, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
2017-01-12 6:35 ` Failures on Fedora-s390x-m64, branch master sergiodj+buildbot
2017-01-13 2:18 ` Failures on Fedora-x86_64-native-gdbserver-m32, " sergiodj+buildbot
@ 2017-01-13 2:31 ` sergiodj+buildbot
2017-01-13 2:39 ` Failures on Fedora-x86_64-m32, " sergiodj+buildbot
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-13 2:31 UTC (permalink / raw)
To: gdb-testers
Buildslave:
fedora-x86-64-1
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m64/builds/5253>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m64/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
*** Diff to previous build ***
============================
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 2: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 3: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 4: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 7: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 9: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 11: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 13: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 15: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 16: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 17: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 19: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 23: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 28: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 30: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 31: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 37: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 39: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 40: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 41: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 43: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 46: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 47: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 49: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 50: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 53: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 54: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 61: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 62: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 63: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 65: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 67: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 69: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 70: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 73: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 74: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 75: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 77: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 78: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 80: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 83: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 84: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 87: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 91: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 92: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 97: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 99: thread apply 2 print $_siginfo.si_signo
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================
*** Complete list of XFAILs for this builder ***
FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST. PLEASE CONTACT THE BUILDBOT ADMIN.
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Fedora-x86_64-m32, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
` (2 preceding siblings ...)
2017-01-13 2:31 ` Failures on Fedora-x86_64-native-extended-gdbserver-m64, " sergiodj+buildbot
@ 2017-01-13 2:39 ` sergiodj+buildbot
2017-01-13 2:49 ` Failures on Fedora-x86_64-native-extended-gdbserver-m32, " sergiodj+buildbot
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-13 2:39 UTC (permalink / raw)
To: gdb-testers
Buildslave:
fedora-x86-64-3
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m32/builds/5236>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Fedora-x86_64-m32/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================
*** Complete list of XFAILs for this builder ***
FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST. PLEASE CONTACT THE BUILDBOT ADMIN.
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
` (3 preceding siblings ...)
2017-01-13 2:39 ` Failures on Fedora-x86_64-m32, " sergiodj+buildbot
@ 2017-01-13 2:49 ` sergiodj+buildbot
2017-01-13 3:20 ` Failures on Fedora-x86_64-m64, " sergiodj+buildbot
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-13 2:49 UTC (permalink / raw)
To: gdb-testers
Buildslave:
fedora-x86-64-1
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/5228>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m32/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================
*** Complete list of XFAILs for this builder ***
FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST. PLEASE CONTACT THE BUILDBOT ADMIN.
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Fedora-x86_64-m64, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
` (4 preceding siblings ...)
2017-01-13 2:49 ` Failures on Fedora-x86_64-native-extended-gdbserver-m32, " sergiodj+buildbot
@ 2017-01-13 3:20 ` sergiodj+buildbot
2017-01-13 15:06 ` Failures on Ubuntu-AArch64-native-gdbserver-m64, " sergiodj+buildbot
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-13 3:20 UTC (permalink / raw)
To: gdb-testers
Buildslave:
fedora-x86-64-2
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m64/builds/5267>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Fedora-x86_64-m64/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================
*** Complete list of XFAILs for this builder ***
FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST. PLEASE CONTACT THE BUILDBOT ADMIN.
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Ubuntu-AArch64-native-gdbserver-m64, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
` (5 preceding siblings ...)
2017-01-13 3:20 ` Failures on Fedora-x86_64-m64, " sergiodj+buildbot
@ 2017-01-13 15:06 ` sergiodj+buildbot
2017-01-14 0:58 ` Failures on Debian-s390x-m64, " sergiodj+buildbot
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-13 15:06 UTC (permalink / raw)
To: gdb-testers
Buildslave:
ubuntu-aarch64-1
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch64-native-gdbserver-m64/builds/1250>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Ubuntu-AArch64-native-gdbserver-m64/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================
*** Complete list of XFAILs for this builder ***
FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST. PLEASE CONTACT THE BUILDBOT ADMIN.
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Debian-s390x-m64, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
` (6 preceding siblings ...)
2017-01-13 15:06 ` Failures on Ubuntu-AArch64-native-gdbserver-m64, " sergiodj+buildbot
@ 2017-01-14 0:58 ` sergiodj+buildbot
2017-01-20 12:41 ` Failures on Fedora-ppc64be-m64, " sergiodj+buildbot
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-14 0:58 UTC (permalink / raw)
To: gdb-testers
Buildslave:
debian-jessie-s390x-1
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Debian-s390x-m64/builds/3687>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Debian-s390x-m64/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================
*** Complete list of XFAILs for this builder ***
FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST. PLEASE CONTACT THE BUILDBOT ADMIN.
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Fedora-ppc64be-m64, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
` (7 preceding siblings ...)
2017-01-14 0:58 ` Failures on Debian-s390x-m64, " sergiodj+buildbot
@ 2017-01-20 12:41 ` sergiodj+buildbot
2017-01-20 14:31 ` Failures on Fedora-ppc64be-native-extended-gdbserver-m64, " sergiodj+buildbot
2017-01-20 15:12 ` Failures on Fedora-ppc64be-cc-with-index, " sergiodj+buildbot
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-20 12:41 UTC (permalink / raw)
To: gdb-testers
Buildslave:
fedora-ppc64be-1
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-m64/builds/4922>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Fedora-ppc64be-m64/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================
*** Complete list of XFAILs for this builder ***
FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST. PLEASE CONTACT THE BUILDBOT ADMIN.
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Fedora-ppc64be-native-extended-gdbserver-m64, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
` (8 preceding siblings ...)
2017-01-20 12:41 ` Failures on Fedora-ppc64be-m64, " sergiodj+buildbot
@ 2017-01-20 14:31 ` sergiodj+buildbot
2017-01-20 15:12 ` Failures on Fedora-ppc64be-cc-with-index, " sergiodj+buildbot
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-20 14:31 UTC (permalink / raw)
To: gdb-testers
Buildslave:
fedora-ppc64be-1
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-extended-gdbserver-m64/builds/4903>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Fedora-ppc64be-native-extended-gdbserver-m64/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
^ permalink raw reply [flat|nested] 12+ messages in thread* Failures on Fedora-ppc64be-cc-with-index, branch master
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
` (9 preceding siblings ...)
2017-01-20 14:31 ` Failures on Fedora-ppc64be-native-extended-gdbserver-m64, " sergiodj+buildbot
@ 2017-01-20 15:12 ` sergiodj+buildbot
10 siblings, 0 replies; 12+ messages in thread
From: sergiodj+buildbot @ 2017-01-20 15:12 UTC (permalink / raw)
To: gdb-testers
Buildslave:
fedora-ppc64be-1
Full Build URL:
<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-cc-with-index/builds/4895>
Commit(s) tested:
192b62ce0b4bb5c61188f570e127a26d2c32f716
Author(s) (in the same order as the commits):
Tom Tromey <tom@tromey.com>
Subject:
Use class to manage BFD reference counts
Testsuite log (gdb.sum and gdb.log) URL(s):
<http://gdb-build.sergiodj.net/results/Fedora-ppc64be-cc-with-index/19/192b62ce0b4bb5c61188f570e127a26d2c32f716/>
*** Diff to previous build ***
============================
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork
============================
*** Complete list of XFAILs for this builder ***
FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST. PLEASE CONTACT THE BUILDBOT ADMIN.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-01-20 15:12 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-12 6:35 [binutils-gdb] Use class to manage BFD reference counts sergiodj+buildbot
2017-01-12 6:35 ` Failures on Fedora-s390x-m64, branch master sergiodj+buildbot
2017-01-13 2:18 ` Failures on Fedora-x86_64-native-gdbserver-m32, " sergiodj+buildbot
2017-01-13 2:31 ` Failures on Fedora-x86_64-native-extended-gdbserver-m64, " sergiodj+buildbot
2017-01-13 2:39 ` Failures on Fedora-x86_64-m32, " sergiodj+buildbot
2017-01-13 2:49 ` Failures on Fedora-x86_64-native-extended-gdbserver-m32, " sergiodj+buildbot
2017-01-13 3:20 ` Failures on Fedora-x86_64-m64, " sergiodj+buildbot
2017-01-13 15:06 ` Failures on Ubuntu-AArch64-native-gdbserver-m64, " sergiodj+buildbot
2017-01-14 0:58 ` Failures on Debian-s390x-m64, " sergiodj+buildbot
2017-01-20 12:41 ` Failures on Fedora-ppc64be-m64, " sergiodj+buildbot
2017-01-20 14:31 ` Failures on Fedora-ppc64be-native-extended-gdbserver-m64, " sergiodj+buildbot
2017-01-20 15:12 ` Failures on Fedora-ppc64be-cc-with-index, " sergiodj+buildbot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).