[binutils-gdb/gdb-7.12-branch] x32: Avoid unsigned long when installing fast tracepoint jump pads

[binutils-gdb/gdb-7.12-branch] x32: Avoid unsigned long when installing fast tracepoint jump pads

[sergiodj+buildbot]

*** TEST RESULTS FOR COMMIT 53e8498437380263d5321bf841c6de526e676347 ***

Author: Pedro Alves <palves@redhat.com>
Branch: gdb-7.12-branch
Commit: 53e8498437380263d5321bf841c6de526e676347

x32: Avoid unsigned long when installing fast tracepoint jump pads

We're casting through unsigned long to write a 64-bit immediate
operand of movabs (the comment said movl, but that was incorrect).
The problem is that unsigned long is 32-bit on x32, so we were writing
fewer bytes than necessary.

Fix this by using an 8 byte memcpy like in other similar places in the
function.

gdb/gdbserver/ChangeLog:
2016-08-23  Pedro Alves  <palves@redhat.com>

	* linux-x86-low.c (amd64_install_fast_tracepoint_jump_pad): Fix
	comment.  Use memcpy instead of casting through unsigned long.

Failures on Fedora-x86_64-native-gdbserver-m32, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m32/builds/4190>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-gdbserver-m32/.git/tree/?h=gdb-7.12-branch&id=907366eaa73790e832ac983e2f5964b593ebfd97>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-m32, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m32/builds/4194>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-m32/.git/tree/?h=gdb-7.12-branch&id=2484406bc6742baa13f33317c39153d2cf716f37>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/4188>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m32/.git/tree/?h=gdb-7.12-branch&id=9440e1337da04bb20c5f842b56515052b10eedf1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-gdbserver-m64, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/4181>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-gdbserver-m64/.git/tree/?h=gdb-7.12-branch&id=982627bf1d52fa855195853e2c7c173bdce34a40>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-m64, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m64/builds/4214>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-m64/.git/tree/?h=gdb-7.12-branch&id=b6bc678b4706772cb7f1e698124d202cf7e787f3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-i686, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/4203>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-i686/.git/tree/?h=gdb-7.12-branch&id=585e68b55a333f18261b376b5594dccc8ffdc5fc>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/4162>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.12-branch&id=6c6fcc0a84fd0b9616dc5ea3584ff8a087440054>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-extended-gdbserver-m64, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-extended-gdbserver-m64/builds/2836>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-s390x-native-extended-gdbserver-m64/.git/tree/?h=gdb-7.12-branch&id=834c2bc788eab46891a2d89f7b38caf5bd9316ca>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.multi/multi-attach.exp: attach to program 2
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-s390x-m64, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	marist-fedora-s390x

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/3695>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-s390x-m64/.git/tree/?h=gdb-7.12-branch&id=308a8c6c58143a1cb0170dadd0f18d32537a4c40>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/siginfo-thread.exp: Extract si_errno
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4019>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=gdb-7.12-branch&id=bcee14724f1222ab340e2e19721c893835b427d6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686-native-extended-gdbserver, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686-native-extended-gdbserver/builds/4002>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-extended-gdbserver/.git/tree/?h=gdb-7.12-branch&id=69910dc66b16cbe4c25ac8f036a784479cd4a6da>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-ppc64be-native-gdbserver-m64, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-gdbserver-m64/builds/4064>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<Error fetching commit ID for 53e8498437380263d5321bf841c6de526e676347>

Failures on Fedora-ppc64be-native-extended-gdbserver-m64, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-extended-gdbserver-m64/builds/4072>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<Error fetching commit ID for 53e8498437380263d5321bf841c6de526e676347>

Failures on Fedora-ppc64le-native-extended-gdbserver-m64, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-native-extended-gdbserver-m64/builds/4006>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<Error fetching commit ID for 53e8498437380263d5321bf841c6de526e676347>

Failures on Debian-x86_64-m64, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-x86_64

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-x86_64-m64/builds/3937>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-x86_64-m64/.git/tree/?h=gdb-7.12-branch&id=8e7d4a805d34beefdd124e70cde2f4556849ffbe>

*** Diff to previous build ***
============================
new FAIL: gdb.ada/formatted_ref.exp: address of s1
new FAIL: gdb.arch/amd64-stap-special-operands.exp: run to probe triplet
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/checkpoint-ns.exp: break2 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: step in 6 two
PASS -> FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: step in 7 two
PASS -> FAIL: gdb.base/interrupt.exp: Send Control-C, second time
PASS -> FAIL: gdb.base/interrupt.exp: signal SIGINT
PASS -> FAIL: gdb.base/interrupt.exp: echo more data
new FAIL: gdb.base/paginate-inferior-exit.exp: paginate: Can't run to main
PASS -> FAIL: gdb.base/solib-overlap.exp: 0x40000000: attach
PASS -> FAIL: gdb.base/structs.exp: p chartest
PASS -> FAIL: gdb.base/valgrind-infcall.exp: target remote for vgdb
PASS -> FAIL: gdb.base/valgrind-infcall.exp: monitor v.set gdb_output
PASS -> FAIL: gdb.base/valgrind-infcall.exp: continue #1
PASS -> FAIL: gdb.guile/scm-error.exp: error loading scm file caught
PASS -> FAIL: gdb.guile/scm-error.exp: no delayed error
PASS -> FAIL: gdb.guile/scm-iterator.exp: import
PASS -> FAIL: gdb.guile/scm-iterator.exp: get frame sal
new FAIL: gdb.python/py-frame.exp: Can't run to main
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
new FAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: Can't run to main
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-x86_64-native-extended-gdbserver-m64, branch gdb-7.12-branch

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-x86_64

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-x86_64-native-extended-gdbserver-m64/builds/4051>

Commit(s) tested:
	53e8498437380263d5321bf841c6de526e676347

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-x86_64-native-extended-gdbserver-m64/.git/tree/?h=gdb-7.12-branch&id=ff3c673e69a3f56e053f8c10292d9d6c497c2d97>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.ada/task_bp.exp: run to pck.dummy_task - from psymtab
PASS -> FAIL: gdb.ada/variant_record_packed_array.exp: print empty
PASS -> FAIL: gdb.base/branch-to-self.exp: break-cond: side=host: continue to breakpoint: continue to break
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieYES: reach-
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach final prompt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: sleep function started
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/gdb-sigterm.exp: 50 SIGTERM passes
PASS -> FAIL: gdb.base/killed-outside.exp: registers: flushregs
PASS -> FAIL: gdb.base/multi-forks.exp: Run to exit 7
PASS -> FAIL: gdb.base/sigstep.exp: displaced=off: continue on breakpoint, skip handler: performing continue
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: stepi on breakpoint, skip handler, no handler: set done
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience
PASS -> FAIL: gdb.base/sigstep.exp: displaced=on: continue on breakpoint, skip handler, with sw-watchpoint, no handler: set done
PASS -> FAIL: gdb.base/step-bt.exp: run to hello
PASS -> FAIL: gdb.base/structs.exp: advance to fun<n> for finish; return 5 structs-tc
PASS -> FAIL: gdb.java/jmisc.exp: continue to breakpoint: jmisc.main
PASS -> FAIL: gdb.java/jmisc.exp: ptype jmisc
PASS -> FAIL: gdb.java/jmisc.exp: p args
PASS -> FAIL: gdb.linespec/ls-errs.exp: lang=C: break 	  	:
PASS -> FAIL: gdb.linespec/ls-errs.exp: lang=C: break -100
PASS -> FAIL: gdb.linespec/ls-errs.exp: lang=C++: break -10	  	:
PASS -> FAIL: gdb.linespec/ls-errs.exp: lang=C++: break 3 1
PASS -> FAIL: gdb.linespec/ls-errs.exp: lang=C++: break -line 3 1
PASS -> FAIL: gdb.mi/mi2-amd64-entry-value.exp: mi runto main
PASS -> FAIL: gdb.python/py-unwind.exp: import python scripts
PASS -> FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: stop all threads
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.