[binutils-gdb] Identify remote fork event support

[binutils-gdb] Identify remote fork event support

[sergiodj+buildbot]

*** TEST RESULTS FOR COMMIT 89245bc05692aaa107fa2884c032da21682edc72 ***

Author: Don Breazeal <donb@codesourcery.com>
Branch: master
Commit: 89245bc05692aaa107fa2884c032da21682edc72

Identify remote fork event support
This patch implements a mechanism for GDB to determine whether fork
events are supported in gdbserver.  This is a preparatory patch for
remote fork and exec event support.

Two new RSP packets are defined to represent fork and vfork event
support.  These packets are used just like PACKET_multiprocess_feature
to denote whether the corresponding event is supported.  GDB sends
fork-events+ and vfork-events+ to gdbserver to inquire about fork
event support.  If the response enables these packets, then GDB
knows that gdbserver supports the corresponding events and will
enable them.

Target functions used to query for support are included along with
each new packet.

In order for gdbserver to know whether the events are supported at the
point where the qSupported packet arrives, the code in nat/linux-ptrace.c
had to be reorganized.  Previously it would test for fork/exec event
support, then enable the events using the pid of the inferior.  When the
qSupported packet arrives there may not be an inferior.  So the mechanism
was split into two parts: a function that checks whether the events are
supported, called when gdbserver starts up, and another that enables the
events when the inferior stops for the first time.

Another gdbserver change was to add some global variables similar to
multi_process, one per new packet.  These are used to control whether
the corresponding fork events are enabled.  If GDB does not inquire
about the event support in the qSupported packet, then gdbserver will
not set these "report the event" flags.  If the flags are not set, the
events are ignored like they were in the past.  Thus, gdbserver will
never send fork event notification to an older GDB that doesn't
recognize fork events.

Tested on Ubuntu x64, native/remote/extended-remote, and as part of
subsequent patches in the series.

gdb/gdbserver/ChangeLog:

        * linux-low.c (linux_supports_fork_events): New function.
        (linux_supports_vfork_events): New function.
        (linux_target_ops): Initialize new structure members.
        (initialize_low): Call linux_check_ptrace_features.
        * lynx-low.c (lynx_target_ops): Initialize new structure
        members.
        * server.c (report_fork_events, report_vfork_events):
        New global flags.
        (handle_query): Add new features to qSupported packet and
        response.
        (captured_main): Initialize new global variables.
        * target.h (struct target_ops) <supports_fork_events>:
        New member.
        <supports_vfork_events>: New member.
        (target_supports_fork_events): New macro.
        (target_supports_vfork_events): New macro.
        * win32-low.c (win32_target_ops): Initialize new structure
        members.

gdb/ChangeLog:

        * nat/linux-ptrace.c (linux_check_ptrace_features): Change
        from static to extern.
        * nat/linux-ptrace.h (linux_check_ptrace_features): Declare.
        * remote.c (anonymous enum): <PACKET_fork_event_feature,
        * PACKET_vfork_event_feature>: New enumeration constants.
        (remote_protocol_features): Add table entries for new packets.
        (remote_query_supported): Add new feature queries to qSupported
        packet.
        (_initialize_remote): Exempt new packets from the requirement
        to have 'set remote' commands.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/958>

Commit(s) tested:
	89245bc05692aaa107fa2884c032da21682edc72

Author(s) (in the same order as the commits):
	Don Breazeal <donb@codesourcery.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f241b53e18ba39ccf530b401131935e31dcc7d12>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.arch/i386-biarch-core.exp: .text is readable
new FAIL: gdb.arch/i386-biarch-core.exp: core-file
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at a function only for a selected ASM file.
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at a global function only for a selected ASM file.
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at function in all instances for a selected ASM file.
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686-native-gdbserver, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686-native-gdbserver/builds/945>

Commit(s) tested:
	89245bc05692aaa107fa2884c032da21682edc72

Author(s) (in the same order as the commits):
	Don Breazeal <donb@codesourcery.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-gdbserver/.git/tree/?h=master&id=2309171516507d68afc0906ab69b96edf9c3301f>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.arch/i386-biarch-core.exp: .text is readable
new FAIL: gdb.arch/i386-biarch-core.exp: core-file
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
PASS -> FAIL: gdb.base/gnu-ifunc.exp: step
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at a function only for a selected ASM file.
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at a global function only for a selected ASM file.
PASS -> FAIL: gdb.linespec/break-asm-file.exp: set a break-point at function in all instances for a selected ASM file.
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
============================

Failures on Fedora-ppc64be-native-extended-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-21-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-extended-gdbserver-m64/builds/980>

Commit(s) tested:
	89245bc05692aaa107fa2884c032da21682edc72

Author(s) (in the same order as the commits):
	Don Breazeal <donb@codesourcery.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-native-extended-gdbserver-m64/.git/tree/?h=master&id=6c44bea27b5193549cde78127ea7bfd227bcd1da>

*** Regressions found ***
============================
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as PRESENT
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as PRESENT
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieNO: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as PRESENT
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieNO: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as PRESENT
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: symbol-less: ld.so exit
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: symbol-less: seen displacement message as PRESENT
new FAIL: gdb.base/catch-syscall.exp: set tdesc filename /home/gdb-buildbot/fedora-21-ppc64be-1/fedora-ppc64be-native-extended-gdbserver/build/gdb/testsuite/outputs/gdb.base/catch-syscall/trivial.xml (got interactive prompt)
new FAIL: gdb.base/interrupt.exp: echo data (the program exited)
new FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
new FAIL: gdb.base/valgrind-db-attach.exp: bt
new FAIL: gdb.base/valgrind-infcall.exp: continue #1 (valgrind vgdb has terminated)
new FAIL: gdb.base/valgrind-infcall.exp: monitor v.set gdb_output
new FAIL: gdb.base/valgrind-infcall.exp: target remote for vgdb (got interactive prompt)
new FAIL: gdb.gdb/selftest.exp: send ^C to child process (timeout)
new FAIL: gdb.reverse/until-precsave.exp: Kill process, prepare to debug log file (timeout)
new FAIL: gdb.reverse/until-precsave.exp: advance to factorial (got interactive prompt)
new FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: finish to main (got interactive prompt)
new FAIL: gdb.reverse/until-precsave.exp: reload core file (timeout)
new FAIL: gdb.reverse/until-precsave.exp: run to end of main (timeout)
new FAIL: gdb.reverse/until-precsave.exp: save process recfile (timeout)
PASS -> FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function
new FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: until line number (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +112: waitrsv
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +116: waitrsv
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +120: waitimpl
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +124: waitimpl
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as PRESENT
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as PRESENT
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieNO: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as PRESENT
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieNO: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as PRESENT
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: symbol-less: ld.so exit
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: symbol-less: seen displacement message as PRESENT
new FAIL: gdb.base/catch-syscall.exp: set tdesc filename /home/gdb-buildbot/fedora-21-ppc64be-1/fedora-ppc64be-native-extended-gdbserver/build/gdb/testsuite/outputs/gdb.base/catch-syscall/trivial.xml (got interactive prompt)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: echo data (the program exited)
new FAIL: gdb.base/interrupt.exp: echo more data (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file
new FAIL: gdb.base/interrupt.exp: send end of file (timeout)
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.base/valgrind-db-attach.exp: bt
new FAIL: gdb.base/valgrind-infcall.exp: continue #1 (valgrind vgdb has terminated)
new FAIL: gdb.base/valgrind-infcall.exp: monitor v.set gdb_output
new FAIL: gdb.base/valgrind-infcall.exp: target remote for vgdb (got interactive prompt)
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.gdb/selftest.exp: send ^C to child process (timeout)
new FAIL: gdb.reverse/until-precsave.exp: advance to factorial (got interactive prompt)
new FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: finish to main (got interactive prompt)
PASS -> FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function
new FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (the program is no longer running)
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/func-ptrs.exp: stop in sentinel (timeout)
FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (timeout)
FAIL: gdb.reverse/until-precsave.exp: finish to main (timeout)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: set reverse execution (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (timeout)
FAIL: gdb.reverse/until-precsave.exp: advance to marker2
FAIL: gdb.reverse/until-precsave.exp: finish to main
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: set reverse execution
FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (got interactive prompt)
FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
FAIL: gdb.gdb/selftest.exp: backtrace through signal handler (timeout)
FAIL: gdb.gdb/selftest.exp: send SIGINT signal to child process (timeout)
FAIL: gdb.base/func-ptrs.exp: stop in sentinel
FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (timeout)
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2
FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (timeout)
FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (timeout)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame
============================

Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/1034>

Commit(s) tested:
	89245bc05692aaa107fa2884c032da21682edc72

Author(s) (in the same order as the commits):
	Don Breazeal <donb@codesourcery.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m32/.git/tree/?h=master&id=31398f84d7832ee81fc4bb0113109b41a3bfdd5a>

*** Regressions found ***
============================
new FAIL: gdb.base/interrupt.exp: echo data (the program exited)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: echo data (the program exited)
new FAIL: gdb.base/interrupt.exp: echo more data (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file
new FAIL: gdb.base/interrupt.exp: send end of file (timeout)
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/arraydim.exp: print m'first
FAIL: gdb.ada/arraydim.exp: print m'first(1)
FAIL: gdb.ada/arraydim.exp: print m'first(2)
FAIL: gdb.ada/arraydim.exp: print m'first(3)
FAIL: gdb.ada/arraydim.exp: print m'last
FAIL: gdb.ada/arraydim.exp: print m'last(1)
FAIL: gdb.ada/arraydim.exp: print m'last(2)
FAIL: gdb.ada/arraydim.exp: print m'last(3)
FAIL: gdb.ada/arraydim.exp: print m'length
FAIL: gdb.ada/arraydim.exp: print m'length(1)
FAIL: gdb.ada/arraydim.exp: print m'length(2)
FAIL: gdb.ada/arraydim.exp: print m'length(3)
FAIL: gdb.ada/arrayidx.exp: print e_one_two_three
FAIL: gdb.ada/arrayidx.exp: print e_one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print empty
FAIL: gdb.ada/arrayidx.exp: print empty, indexes off
FAIL: gdb.ada/arrayidx.exp: print few_reps
FAIL: gdb.ada/arrayidx.exp: print few_reps, indexes off
FAIL: gdb.ada/arrayidx.exp: print many_reps
FAIL: gdb.ada/arrayidx.exp: print many_reps, indexes off
FAIL: gdb.ada/arrayidx.exp: print one_two_three
FAIL: gdb.ada/arrayidx.exp: print one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print p_one_two_three
FAIL: gdb.ada/arrayidx.exp: print p_one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print r_two_three
FAIL: gdb.ada/arrayidx.exp: print r_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print u_one_two_three
FAIL: gdb.ada/arrayidx.exp: print u_one_two_three, indexes off
FAIL: gdb.ada/arrayparam.exp: print first after function call
FAIL: gdb.ada/arrayparam.exp: print last after function call
FAIL: gdb.ada/arrayparam.exp: print length after function call
FAIL: gdb.ada/bp_enum_homonym.exp: run to pck.archive breakpoint
FAIL: gdb.ada/bp_range_type.exp: print small_value
FAIL: gdb.ada/bp_range_type.exp: run to breakpoint
FAIL: gdb.ada/char_param.exp: call next
FAIL: gdb.ada/char_param.exp: print procedure_result after calling next
FAIL: gdb.ada/char_param.exp: print procedure_result after calling same
FAIL: gdb.ada/complete.exp: complete p external_ident
FAIL: gdb.ada/complete.exp: complete p some
FAIL: gdb.ada/complete.exp: interactive complete 'print some' (timeout)
FAIL: gdb.ada/cond_lang.exp: continue (the program is no longer running)
FAIL: gdb.ada/dyn_arrayidx.exp: ptype array_type
FAIL: gdb.ada/enum_idx_packed.exp: print full'first
FAIL: gdb.ada/expr_delims.exp: Check that watchpoint is set correctly.
FAIL: gdb.ada/expr_delims.exp: Print variable 'thread'
FAIL: gdb.ada/expr_delims.exp: Set conditional watchpoint.
FAIL: gdb.ada/expr_delims.exp: Set plain watchpoint on variable 'thread'
FAIL: gdb.ada/expr_delims.exp: continue (the program is no longer running)
FAIL: gdb.ada/exprs.exp: long_float'max
FAIL: gdb.ada/exprs.exp: long_float'min
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 10
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 20
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 20.0
FAIL: gdb.ada/fixed_points.exp: p on a new fixed point type
FAIL: gdb.ada/fixed_points.exp: p on a subtype fixed point type
FAIL: gdb.ada/fixed_points.exp: print Overprecise_Object
FAIL: gdb.ada/fixed_points.exp: ptype Overprecise_Object
FAIL: gdb.ada/float_param.exp: call set_double(1, 3.0)
FAIL: gdb.ada/float_param.exp: call set_long_double(1, global_small_struct, 4.0)
FAIL: gdb.ada/float_param.exp: print global_double
FAIL: gdb.ada/float_param.exp: print global_float
FAIL: gdb.ada/float_param.exp: print global_long_double
FAIL: gdb.ada/formatted_ref.exp: print s.x = 13
FAIL: gdb.ada/formatted_ref.exp: print/x s'access
FAIL: gdb.ada/homonym.exp: continue until BREAK_2 (the program is no longer running)
FAIL: gdb.ada/homonym.exp: print lcl at BREAK_1
FAIL: gdb.ada/homonym.exp: print lcl at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype int_type at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype lcl at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype lcl at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype local_type at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype local_type at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_2
FAIL: gdb.ada/interface.exp: print s
FAIL: gdb.ada/iwide.exp: print d_access.all
FAIL: gdb.ada/iwide.exp: print dp_access.all
FAIL: gdb.ada/iwide.exp: print s_access.all
FAIL: gdb.ada/iwide.exp: print sp_access.all
FAIL: gdb.ada/lang_switch.exp: backtrace
FAIL: gdb.ada/lang_switch.exp: backtrace with lang set to C
FAIL: gdb.ada/mi_dyn_arr.exp: Create bt varobj
FAIL: gdb.ada/mi_dyn_arr.exp: run to foo.adb:22 (exec-continue) (MI error)
FAIL: gdb.ada/mi_dyn_arr.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions const.aint
FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions task
FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
FAIL: gdb.ada/mi_interface.exp: list ggg1's children
FAIL: gdb.ada/mi_interface.exp: run to foo.adb:22 (exec-continue) (MI error)
FAIL: gdb.ada/mi_interface.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.ada/mi_task_info.exp: -ada-task-info 3
FAIL: gdb.ada/null_array.exp: print my_matrix
FAIL: gdb.ada/null_array.exp: ptype my_table
FAIL: gdb.ada/operator_bp.exp: continue to "&" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "*" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "**" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "+" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "-" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "/" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "<" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "<=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ">" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ">=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "abs" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "and" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "mod" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "not" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "or" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "rem" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "xor" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."&" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."*" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."**" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."+" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."-" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."/" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."<" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."<=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops.">" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops.">=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."abs" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."and" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."mod" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."not" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."or" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."rem" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."xor" (the program is no longer running)
FAIL: gdb.ada/packed_array.exp: print &var
FAIL: gdb.ada/packed_array.exp: print u_var
FAIL: gdb.ada/packed_array.exp: ptype &var
FAIL: gdb.ada/packed_tagged.exp: ptype x
FAIL: gdb.ada/pkd_arr_elem.exp: print test.str
FAIL: gdb.ada/pkd_arr_elem.exp: print test.str(1)
FAIL: gdb.ada/pp-rec-component.exp: print /r before
FAIL: gdb.ada/pp-rec-component.exp: print before
FAIL: gdb.ada/print_chars.exp: print WC
FAIL: gdb.ada/print_chars.exp: print WWC
FAIL: gdb.ada/py_range.exp: python print(int(gdb.parse_and_eval('ir')))
FAIL: gdb.ada/py_range.exp: python print(int(gdb.parse_and_eval('si')))
FAIL: gdb.ada/rdv_wait.exp: task 2
FAIL: gdb.ada/set_pckd_arr_elt.exp: continue to update_small (the program is no longer running)
FAIL: gdb.ada/tagged.exp: print obj
FAIL: gdb.ada/tagged.exp: print segm
FAIL: gdb.ada/tagged.exp: ptype obj
FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
FAIL: gdb.ada/task_bp.exp: run to dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:pck.dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:pck.dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.dummy_task - from psymtab
FAIL: gdb.ada/tasks.exp: break break_me task 1
FAIL: gdb.ada/tasks.exp: break break_me task 3
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print cold'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print prim'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print vars'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype cold'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype full'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype prim'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype vars'length
FAIL: gdb.ada/type_coercion.exp: p q
FAIL: gdb.ada/type_coercion.exp: print {Integer} $addr
FAIL: gdb.ada/type_coercion.exp: save q'address in convenience variable
FAIL: gdb.ada/type_coercion.exp: set {Integer} $addr := 19
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: continue to STOP2 (the program is no longer running)
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_Object.Ptr when null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when no longer null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when no longer null <<2>>
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_object after setting Ptr
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_object.ptr.all
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_p_object after setting Ptr
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_p_object.ptr.all
FAIL: gdb.ada/var_arr_attrs.exp: print my_object.data'last
FAIL: gdb.ada/var_arr_attrs.exp: print my_object.data'length
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'first
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'last
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'length
FAIL: gdb.ada/variant_record_packed_array.exp: print address
FAIL: gdb.ada/variant_record_packed_array.exp: print adress content
FAIL: gdb.ada/watch_arg.exp: Continuing to second breakpoint (the program is no longer running)
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object with null Ptr
FAIL: gdb.ada/mi_var_array.exp: Create bt varobj
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.ada/mi_var_array.exp: run to bar.adb:28 (exec-continue) (MI error)
FAIL: gdb.ada/mi_var_array.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: attach (got interactive prompt)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
FAIL: gdb.threads/print-threads.exp: all threads ran once (fast) (total 4 threads ran)
FAIL: gdb.threads/print-threads.exp: all threads ran once (slow with kill breakpoint) (total 4 threads ran)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2
FAIL: gdb.threads/print-threads.exp: all threads ran once
FAIL: gdb.threads/print-threads.exp: all threads ran once (slow) (total 4 threads ran)
FAIL: gdb.threads/watchthreads2.exp: all threads started
FAIL: gdb.threads/watchthreads2.exp: run to thread_started
============================

Failures on Fedora-x86_64-cc-with-index, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1009>

Commit(s) tested:
	89245bc05692aaa107fa2884c032da21682edc72

Author(s) (in the same order as the commits):
	Don Breazeal <donb@codesourcery.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=master&id=b4527d1d600197a9cacd82a97411df9244404b80>

*** Regressions found ***
============================
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
============================


*** Failures that are being ignored ***
============================
============================

Failures on Fedora-x86_64-native-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m32/builds/1038>

Commit(s) tested:
	89245bc05692aaa107fa2884c032da21682edc72

Author(s) (in the same order as the commits):
	Don Breazeal <donb@codesourcery.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-gdbserver-m32/.git/tree/?h=master&id=cf661fc195cd4edf955eede6f5079833eaf47559>

*** Regressions found ***
============================
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/interface.exp: print s
FAIL: gdb.ada/iwide.exp: print My_Drawable
FAIL: gdb.ada/iwide.exp: print d_access.all
FAIL: gdb.ada/iwide.exp: print dp_access.all
FAIL: gdb.ada/iwide.exp: print s_access.all
FAIL: gdb.ada/iwide.exp: print sp_access.all
FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
FAIL: gdb.ada/mi_interface.exp: list ggg1's children
FAIL: gdb.ada/ptype_tagged_param.exp: ptype s
FAIL: gdb.ada/str_uninit.exp: print my_str
FAIL: gdb.ada/tagged.exp: print obj
FAIL: gdb.ada/tagged.exp: ptype obj
FAIL: gdb.ada/tagged_access.exp: ptype c.all
FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: breakpoint on thread_function0's caller (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: delete 5 (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: let local watchpoint trigger (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: let thread_function0 return (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint automatically deleted (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint is still in breakpoint list (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint still triggers (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: the other thread stopped on breakpoint (timeout)
FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5
FAIL: gdb.threads/wp-replication.exp: Thread 5 hit breakpoint at thread_started
FAIL: gdb.threads/print-threads.exp: all threads ran once (fast) (total 4 threads ran)
FAIL: gdb.threads/wp-replication.exp: Thread 6 hit breakpoint at thread_started
FAIL: gdb.threads/wp-replication.exp: Thread 7 hit breakpoint at thread_started
FAIL: gdb.base/info-os.exp: get process groups
FAIL: gdb.threads/print-threads.exp: all threads ran once (slow with kill breakpoint) (total 4 threads ran)
FAIL: gdb.threads/wp-replication.exp: Thread 8 hit breakpoint at thread_started
FAIL: gdb.threads/wp-replication.exp: Thread 9 hit breakpoint at thread_started
FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 80 on watched_data (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: Thread 3 hit breakpoint at thread_started
FAIL: gdb.threads/wp-replication.exp: Thread 4 hit breakpoint at thread_started
FAIL: gdb.threads/wp-replication.exp: Thread 5 hit breakpoint at thread_started (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: Thread 6 hit breakpoint at thread_started (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: Thread 7 hit breakpoint at thread_started (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: Thread 8 hit breakpoint at thread_started (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: Thread 9 hit breakpoint at thread_started (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: set var test_ready=1
FAIL: gdb.threads/watchthreads2.exp: all threads started
FAIL: gdb.threads/watchthreads2.exp: run to thread_started
============================