[binutils-gdb/gdb-7.10-branch] [amd64] Invalid return address after displaced stepping

[binutils-gdb/gdb-7.10-branch] [amd64] Invalid return address after displaced stepping

[sergiodj+buildbot]

*** TEST RESULTS FOR COMMIT 475f4248decaaa6fcd6fbed0b47dd541db640c3f ***

Author: Joel Brobecker <brobecker@adacore.com>
Branch: gdb-7.10-branch
Commit: 475f4248decaaa6fcd6fbed0b47dd541db640c3f

[amd64] Invalid return address after displaced stepping

Making all-stop run on top of non-stop caused a small regression
in behavior. This was observed on x86_64-linux. The attached testcase
is in C whereas the investigation was done with an Ada program,
but it's the same scenario, and using a C testcase allows wider testing.
Basically: I am debugging a single-threaded program, and currently
stopped inside a function provided by a shared-library, at a line
calling a subprogram provided by a second shared library, and trying
to "next" over that function call.

Before we changed the default all-stop behavior, we had:

    7             Impl_Initialize;  -- Stop here and try "next" over this line
    (gdb) n
    8             return 5;  <<-- OK

But now, "next" just stops much earlier:

    (gdb) n
    0x00007ffff7bd8560 in impl.initialize@plt () from /[...]/lib/libpck.so

What happens is that next stops at a call instruction, which calls
the function's PLT, and GDB fails to notice that the inferior stepped
into a subroutine, and so decides that we're done. We can see another
symptom of the same issue by looking at the backtrace at the point
GDB stopped:

    (gdb) bt
    #0  0x00007ffff7bd8560 in impl.initialize@plt ()
       from /[...]/lib/libpck.so
    #1  0x00000000f7bd86f9 in ?? ()
    #2  0x00007fffffffdf50 in ?? ()
    #3  0x0000000000401893 in a () at /[...]/a.adb:7
    Backtrace stopped: frame did not save the PC

With a functioning GDB, the backtrace looks like the following instead:

    #0  0x00007ffff7bd8560 in impl.initialize@plt ()
       from /[...]/lib/libpck.so
    #1  0x00007ffff7bd86f9 in sub () at /[...]/pck.adb:7
    #2  0x0000000000401893 in a () at /[...]/a.adb:7

Note how, for frame #1, the address looks quite similar, except
for the high-order bits not being set:

    #1  0x00007ffff7bd86f9 in sub () at /[...]/pck.adb:7   <<<--  OK
    #1  0x00000000f7bd86f9 in ?? ()                        <<<--  WRONG
              ^^^^
              ||||
              Wrong

Investigating this further led me to displaced stepping.
As we are "next"-ing from a location where a breakpoint is inserted,
we need to step out of it, and since we're on non-stop mode, we need
to do it using displaced stepping. And looking at
amd64-tdep.c:amd64_displaced_step_fixup, I found the code that handles
the return address:

    regcache_cooked_read_unsigned (regs, AMD64_RSP_REGNUM, &rsp);
    retaddr = read_memory_unsigned_integer (rsp, retaddr_len, byte_order);
    retaddr = (retaddr - insn_offset) & 0xffffffffUL;

The mask used to compute retaddr looks wrong to me, keeping only
4 bytes instead of 8, and explains why the high order bits of
the backtrace are unset. What happens is that, after the displaced
stepping has completed, GDB restores that return address at the location
where the program expects it.  But because the top half bits of
the address have been masked out, the return address is now invalid.
The incorrect behavior of the "next" command and the backtrace at
that location are the first symptoms of that.  Another symptom is
that this actually alters the behavior of the program, where a "cont"
from there soon leads to a SEGV when the inferior tries to jump back
to that incorrect return address:

    (gdb) c
    Continuing.

    Program received signal SIGSEGV, Segmentation fault.
    0x00000000f7bd86f9 in ?? ()
    ^^^^^^^^^^^^^^^^^^

This patch fixes the issue by using a mask that seems more appropriate
for this architecture.

gdb/ChangeLog:

        * amd64-tdep.c (amd64_displaced_step_fixup): Fix the mask used to
        compute RETADDR.

gdb/testsuite/ChangeLog:

        * gdb.base/dso2dso-dso2.c, gdb.base/dso2dso-dso2.h,
        gdb.base/dso2dso-dso1.c, gdb.base/dso2dso-dso1.h, gdb.base/dso2dso.c,
        gdb.base/dso2dso.exp: New files.

Tested on x86_64-linux, no regression.

Failures on Fedora-i686, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/1746>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-i686/.git/tree/?h=gdb-7.10-branch&id=f27bf243846124a2a6c7db247ed8a6bc09460755>

*** Regressions found ***
============================
new FAIL: gdb.arch/i386-biarch-core.exp: core-file
new FAIL: gdb.arch/i386-biarch-core.exp: .text is readable
new FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.arch/i386-biarch-core.exp: core-file
new FAIL: gdb.arch/i386-biarch-core.exp: .text is readable
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.server/wrapper.exp: setting breakpoint at marker
new FAIL: gdb.server/wrapper.exp: print d
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================

Failures on Fedora-x86_64-m32, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m32/builds/1737>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-m32/.git/tree/?h=gdb-7.10-branch&id=ccc5bdd06c8d0cff4878a556df580dddebebfb49>

*** Regressions found ***
============================
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1707>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=e85fb8cee5de35156411af49fa1be833372465fa>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/manythreads.exp: stop threads 2
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.threads/manythreads.exp: stop threads 2
============================

Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/1731>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m32/.git/tree/?h=gdb-7.10-branch&id=8693a86cbc00a7652380fba4b52d23f12cc825b5>

*** Regressions found ***
============================
PASS -> FAIL: gdb.ada/win_fu_syms.exp: compilation foo.adb
new FAIL: gdb.base/catch-syscall.exp: set tdesc filename /home/gdb-buildbot/fedora-x86-64-3/fedora-x86-64-native-extended-gdbserver-m32/build/gdb/testsuite/outputs/gdb.base/catch-syscall/trivial.xml (got interactive prompt)
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.ada/win_fu_syms.exp: compilation foo.adb
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/catch-syscall.exp: set tdesc filename /home/gdb-buildbot/fedora-x86-64-3/fedora-x86-64-native-extended-gdbserver-m32/build/gdb/testsuite/outputs/gdb.base/catch-syscall/trivial.xml (got interactive prompt)
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.base/interrupt.exp: echo data (timeout)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.base/interrupt.exp: echo more data (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file
new FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
PASS -> FAIL: gdb.trace/collection.exp: collect register locals collectively: collected local char
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: tfile: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================

Failures on AIX-POWER7-plain, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	aix-power7-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/AIX-POWER7-plain/builds/468>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/AIX-POWER7-plain/.git/tree/?h=gdb-7.10-branch&id=33da654d69babc023073ef82a641d7f4c569cbff>

*** Regressions found ***
============================
new FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock off: signal command queries
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.base/completion.exp: tab complete break break.c:ma (timeout)
new FAIL: gdb.base/completion.exp: complete break break.c:ma
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: print E2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: before start: c++: print S2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: before start: c++: print U2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype C
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c: print E2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: before start: c: print S2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: before start: c: print U2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype U2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: in main: c++: print E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: print S
new FAIL: gdb.cp/var-tag.exp: in main: c++: print U
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: print E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: print S2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: in main: c++: print U2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype C
new FAIL: gdb.cp/var-tag.exp: in main: c: print E
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c: print S
new FAIL: gdb.cp/var-tag.exp: in main: c: print U
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c: print E2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c: print S2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: in main: c: print U2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print S
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print U
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype C
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print E
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print S
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print U
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype U2
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=on: Can't run to main
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: Can't run to main
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: Can't run to main
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: Can't run to main
PASS -> FAIL: gdb.threads/hand-call-new-thread.exp: iter 1: p new_thread ()
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 1
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 2
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 3
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 4
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 5
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 6
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 7
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 8
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 9
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 10
new FAIL: gdb.threads/print-threads.exp: all threads ran once (fast) (total 4 threads ran)
new FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock off: signal command queries
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: stop with SIGUSR2
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: stop with SIGUSR1
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: signal command does not query, signal delivered
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: get my_number
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
PASS -> FAIL: gdb.threads/stepi-random-signal.exp: continue to breakpoint: after pthread_kill
new FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit (the program is no longer running)
============================

Failures on Fedora-x86_64-native-gdbserver-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/1726>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-gdbserver-m64/.git/tree/?h=gdb-7.10-branch&id=c526e171e7045f47f29dcef2ef90543c1c933738>

*** Regressions found ***
============================
new FAIL: gdb.base/corefile.exp: core-file warning-free
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.mi/mi-detach.exp: detach
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: Can't run to main
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: Can't run to main
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================

Failures on Fedora-x86_64-native-gdbserver-m32, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m32/builds/1735>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-gdbserver-m32/.git/tree/?h=gdb-7.10-branch&id=ec5f39a7574c630fd31a633ad9c956240339947b>

*** Regressions found ***
============================
PASS -> FAIL: gdb.ada/win_fu_syms.exp: compilation foo.adb
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.ada/win_fu_syms.exp: compilation foo.adb
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.mi/mi-detach.exp: detach
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.trace/collection.exp: collect register locals collectively: collected local char
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: tfile: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================

Failures on Debian-s390x-native-extended-gdbserver-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	debian-wheezy-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-extended-gdbserver-m64/builds/435>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-s390x-native-extended-gdbserver-m64/.git/tree/?h=gdb-7.10-branch&id=87de52b71018df49d399b96487eaa2101d7388e9>

*** Regressions found ***
============================
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (timeout)
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/s390-multiarch.exp: compile (31)
new FAIL: gdb.base/async-shell.exp: run &
new FAIL: gdb.base/async-shell.exp: interrupt
new FAIL: gdb.base/async-shell.exp: process stopped (timeout)
new FAIL: gdb.base/attach-pie-noexec.exp: attach
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: symbol-less: ld.so exit
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: symbol-less: seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): reach
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: reach-(_dl_debug_state|dl_main): seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached (the program is no longer running)
new FAIL: gdb.base/call-sc.exp: value foo returned; return call-sc-tld
new FAIL: gdb.base/catch-syscall.exp: set tdesc filename /home/dje/debian-wheezy-s390x-1/debian-s390x-native-extended-gdbserver/build/gdb/testsuite/outputs/gdb.base/catch-syscall/trivial.xml (got interactive prompt)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called close (the program exited)
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall close has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called chroot (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall chroot has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called pipe (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall pipe has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called write (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall write has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called read (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall read has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called exit_group (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without arguments: continue until exit (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with arguments: program has called close (the program exited)
new FAIL: gdb.base/catch-syscall.exp: with arguments: syscall close has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with arguments: continue until exit (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called close (the program exited)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall close has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called chroot (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall chroot has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called pipe (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall pipe has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called write (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall write has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called read (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall read has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with many arguments: continue until exit (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: wrong args: continue until exit at catch syscall with unused syscall (mlock) (the program exited)
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry: program has called chroot (the program exited)
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: program has called chroot (the program exited)
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: syscall chroot has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: continue until exit (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: close: program has called 6 (the program exited)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: close: syscall 6 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: chroot: program has called 61 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: chroot: syscall 61 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: pipe: program has called 42 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: pipe: syscall 42 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: write: program has called 4 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: write: syscall 4 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: read: program has called 3 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: read: syscall 3 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: without args noxml: program has called 248 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 6 (the program exited)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 6 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 61 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 61 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 42 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 42 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 4 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 4 has returned (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 3 (the program is no longer running)
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 3 has returned (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: info checkpoints one
new FAIL: gdb.base/checkpoint.exp: restart 1 one
new FAIL: gdb.base/checkpoint.exp: verify i 1 one
new FAIL: gdb.base/checkpoint.exp: step in 1 one
new FAIL: gdb.base/checkpoint.exp: restart 2 one
new FAIL: gdb.base/checkpoint.exp: step in 2 one
new FAIL: gdb.base/checkpoint.exp: verify i 2 one
new FAIL: gdb.base/checkpoint.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint.exp: restart 3 one
new FAIL: gdb.base/checkpoint.exp: step in 3 one
new FAIL: gdb.base/checkpoint.exp: verify i 3 one
new FAIL: gdb.base/checkpoint.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint.exp: restart 4 one
new FAIL: gdb.base/checkpoint.exp: step in 4 one
new FAIL: gdb.base/checkpoint.exp: verify i 4 one
new FAIL: gdb.base/checkpoint.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint.exp: restart 5 one
new FAIL: gdb.base/checkpoint.exp: step in 5 one
new FAIL: gdb.base/checkpoint.exp: verify i 5 one
new FAIL: gdb.base/checkpoint.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint.exp: restart 6 one
new FAIL: gdb.base/checkpoint.exp: step in 6 one
new FAIL: gdb.base/checkpoint.exp: verify i 6 one
new FAIL: gdb.base/checkpoint.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint.exp: restart 7 one
new FAIL: gdb.base/checkpoint.exp: step in 7 one
new FAIL: gdb.base/checkpoint.exp: verify i 7 one
new FAIL: gdb.base/checkpoint.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint.exp: restart 8 one
new FAIL: gdb.base/checkpoint.exp: step in 8 one (the program exited)
new FAIL: gdb.base/checkpoint.exp: verify i 8 one
new FAIL: gdb.base/checkpoint.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint.exp: restart 9 one
new FAIL: gdb.base/checkpoint.exp: step in 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify i 9 one
new FAIL: gdb.base/checkpoint.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint.exp: restart 10 one
new FAIL: gdb.base/checkpoint.exp: step in 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify i 10 one
new FAIL: gdb.base/checkpoint.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint.exp: restart 0 one
new FAIL: gdb.base/checkpoint.exp: break3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: Diff input and output one
new FAIL: gdb.base/checkpoint.exp: restart 1 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 1 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint.exp: restart 2 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint.exp: restart 3 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint.exp: restart 4 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint.exp: restart 5 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint.exp: restart 6 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint.exp: restart 7 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint.exp: Diff input and output two
new FAIL: gdb.base/checkpoint.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: restart 1 three
new FAIL: gdb.base/checkpoint.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 1
new FAIL: gdb.base/checkpoint.exp: restart 2 three
new FAIL: gdb.base/checkpoint.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 2
new FAIL: gdb.base/checkpoint.exp: restart 3 three
new FAIL: gdb.base/checkpoint.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 3
new FAIL: gdb.base/checkpoint.exp: restart 4 three
new FAIL: gdb.base/checkpoint.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 4
new FAIL: gdb.base/checkpoint.exp: restart 5 three
new FAIL: gdb.base/checkpoint.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 5
new FAIL: gdb.base/checkpoint.exp: restart 6 three
new FAIL: gdb.base/checkpoint.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 6
new FAIL: gdb.base/checkpoint.exp: restart 7 three
new FAIL: gdb.base/checkpoint.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 7
new FAIL: gdb.base/checkpoint.exp: restart 8 three
new FAIL: gdb.base/checkpoint.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 8
new FAIL: gdb.base/checkpoint.exp: restart 9 three
new FAIL: gdb.base/checkpoint.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 9
new FAIL: gdb.base/checkpoint.exp: restart 10 three
new FAIL: gdb.base/checkpoint.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: outfile still open 10
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint.exp: info checkpoints two
new FAIL: gdb.base/checkpoint.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/commands.exp: continue with watch
new FAIL: gdb.base/corefile.exp: run: with core
new FAIL: gdb.base/corefile.exp: run: core file is cleared
new FAIL: gdb.base/corefile.exp: attach: with core
new FAIL: gdb.base/corefile.exp: attach: core file is cleared
new FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/dfp-test.exp: Correct _Decimal128 return value from called function.
new FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp
new FAIL: gdb.base/display.exp: next hit
new FAIL: gdb.base/dprintf-non-stop.exp: Can't run to main
new FAIL: gdb.base/execl-update-breakpoints.exp: always-inserted off: continue across exec
new FAIL: gdb.base/execl-update-breakpoints.exp: always-inserted on: continue across exec
new FAIL: gdb.base/find-unmapped.exp: find global_var_0, global_var_2, 0xff
new FAIL: gdb.base/find-unmapped.exp: find global_var_1, global_var_2, 0xff
new FAIL: gdb.base/find-unmapped.exp: find global_var_2, (global_var_2 + 16), 0xff
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
new FAIL: gdb.base/gnu_vector.exp: finish shows vector return value
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/longjmp.exp: next over longjmp(1)
new FAIL: gdb.base/longjmp.exp: next over call_longjmp (2)
new FAIL: gdb.base/multi-forks.exp: run to exit 2 (timeout)
new FAIL: gdb.base/multi-forks.exp: run to exit 2 (timeout) <<2>>
new FAIL: gdb.base/pie-execl.exp: continue
new FAIL: gdb.base/pie-execl.exp: pie_execl_marker address has changed
new FAIL: gdb.base/pr11022.exp: breakpoint hit
new FAIL: gdb.base/pr11022.exp: watchpoint hit
new FAIL: gdb.base/pr11022.exp: breakpoint hit 2
new FAIL: gdb.base/pr11022.exp: watchpoint hit 2
new FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
new FAIL: gdb.base/recurse.exp: next over b = 0 in second instance
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
new FAIL: gdb.base/solib-nodir.exp: library loaded
new FAIL: gdb.base/term.exp: info terminal at breakpoint
new FAIL: gdb.base/testenv.exp: Test no TEST_GDB var
new FAIL: gdb.base/testenv.exp: Test with one TEST_GDB var
new FAIL: gdb.base/testenv.exp: Test with two TEST_GDB var
new FAIL: gdb.base/testenv.exp: Test with one TEST_GDB var, after unset
new FAIL: gdb.base/testenv.exp: Test with TEST_GDB_GLOBAL
new FAIL: gdb.base/testenv.exp: Test with TEST_GDB_GLOBAL unset
new FAIL: gdb.base/value-double-free.exp: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: continue until exit
new FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw)
new FAIL: gdb.base/watchpoint-hw.exp: start
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
new FAIL: gdb.base/watchpoint-solib.exp: continue to foo again
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint at func1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
new FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: back at main from marker1
new FAIL: gdb.base/watchpoint.exp: next to `for' in watchpoint.exp
new FAIL: gdb.base/watchpoint.exp: until to ival1 assignment
new FAIL: gdb.base/watchpoint.exp: until to ival3 assignment
new FAIL: gdb.base/watchpoint.exp: until out of loop
new FAIL: gdb.base/watchpoint.exp: step to ival2 assignment
new FAIL: gdb.base/watchpoint.exp: Test complex watchpoint
new FAIL: gdb.base/watchpoint.exp: did not trigger wrong watchpoint
new FAIL: gdb.base/watchpoint.exp: trigger local watch
new FAIL: gdb.base/watchpoint.exp: self-delete local watch
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here <<2>>
new FAIL: gdb.base/watchpoint.exp: trigger1 partially local watch
new FAIL: gdb.base/watchpoint.exp: trigger2 partially local watch
new FAIL: gdb.base/watchpoint.exp: self-delete partially local watch
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here <<3>>
new FAIL: gdb.base/watchpoint.exp: trigger static local watch
new FAIL: gdb.base/watchpoint.exp: continue after trigger static local watch
new FAIL: gdb.base/watchpoint.exp: cont
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: cont <<2>>
new FAIL: gdb.base/watchpoint.exp: cont <<3>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization <<2>>
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program exited)
new FAIL: gdb.base/watchpoint.exp: global_ptr next
new FAIL: gdb.base/watchpoint.exp: next over ptr init
new FAIL: gdb.base/watchpoint.exp: next over buffer set
new FAIL: gdb.base/watchpoint.exp: global_ptr_ptr next
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr init
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr buffer set
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr pointer advance
new FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 5
new FAIL: gdb.cp/annota2.exp: continue until exit (timeout)
new FAIL: gdb.cp/annota2.exp: delete bps
new FAIL: gdb.cp/annota2.exp: break at main (got interactive prompt)
new FAIL: gdb.cp/annota2.exp: set watch on a.x (timeout)
new FAIL: gdb.cp/annota2.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota2.exp: annotate-quit
new FAIL: gdb.cp/annota3.exp: continue to exit (pattern 4)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 2)
new FAIL: gdb.cp/exceptprint.exp: string: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: reference to struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at throw <<2>>
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch <<2>>
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
new FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.dwarf2/dw2-anon-mptr.exp: ptype crash
new FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
new FAIL: gdb.dwarf2/member-ptr-forwardref.exp: ptype c
new FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.mi/mi-dprintf.exp: mi set dprintf style to an unrecognized type (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error) <<2>>
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (timeout)
new FAIL: gdb.modula2/unbounded-array.exp: print unbounded array contents
new FAIL: gdb.multi/bkpt-multi-exec.exp: continue
new FAIL: gdb.multi/bkpt-multi-exec.exp: run
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
new FAIL: gdb.python/py-events.exp: get current thread
new FAIL: gdb.python/py-evsignal.exp: Signal Thread 3
new FAIL: gdb.python/py-evthreads.exp: Run to breakpoint 1
new FAIL: gdb.python/py-evthreads.exp: reached breakpoint 2
new FAIL: gdb.python/py-evthreads.exp: thread 2
new FAIL: gdb.python/py-evthreads.exp: reached breakpoint 3
new FAIL: gdb.python/py-evthreads.exp: thread 3
new FAIL: gdb.python/py-evthreads.exp: continue thread 1
new FAIL: gdb.python/py-evthreads.exp: thread 3 was signaled (timeout)
new FAIL: gdb.python/py-value-cc.exp: u's second field via field
new FAIL: gdb.server/server-exec-info.exp: set sysroot remote: (got interactive prompt)
new FAIL: gdb.server/server-exec-info.exp: info files
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test2 forced_stabs
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test forced_stabs
new FAIL: gdb.threads/execl.exp: continue across exec
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (timeout)
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
new FAIL: gdb.threads/linux-dp.exp: info threads after: 0
new FAIL: gdb.threads/linux-dp.exp: info threads after: 1
new FAIL: gdb.threads/linux-dp.exp: info threads after: 2
new FAIL: gdb.threads/linux-dp.exp: info threads after: 3
new FAIL: gdb.threads/linux-dp.exp: info threads after: 4
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint triggers
new FAIL: gdb.threads/local-watch-wrong-thread.exp: the other thread stopped on breakpoint
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint still triggers
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint automatically deleted
new FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when thread 2 exits
new FAIL: gdb.threads/no-unwaited-for-left.exp: continue stops when the main thread exits
new FAIL: gdb.threads/non-ldr-exc-1.exp: lock-sched0: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-1.exp: lock-sched1: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched0: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched1: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched0: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched1: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-4.exp: lock-sched0: continue over exec (timeout)
new FAIL: gdb.threads/non-ldr-exc-4.exp: lock-sched1: continue over exec (timeout)
new FAIL: gdb.threads/staticthreads.exp: tlsvar in thread
new FAIL: gdb.threads/staticthreads.exp: tlsvar in main
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/thread-execl.exp: schedlock off: get to main in new image (timeout)
new FAIL: gdb.threads/thread-execl.exp: schedlock step: get to main in new image (timeout)
new FAIL: gdb.threads/thread-execl.exp: schedlock on: get to main in new image (timeout)
new FAIL: gdb.threads/thread_events.exp: continue to after_join_func with messages enabled (saw 0, expected 1)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: hardware breakpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: hardware breakpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchthreads.exp: threaded watch loop
new FAIL: gdb.threads/watchthreads.exp: first watchpoint on args[0] hit
new FAIL: gdb.threads/watchthreads.exp: first watchpoint on args[1] hit
new FAIL: gdb.threads/watchthreads.exp: watchpoint on args[0] hit in thread
new FAIL: gdb.threads/watchthreads.exp: watchpoint on args[1] hit in thread
new FAIL: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
new FAIL: gdb.threads/wp-replication.exp: No hardware watchpoints available
new FAIL: gdb.trace/tfile.exp: tfind 0 on trace file
============================

Failures on Fedora-s390x-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	marist-fedora-s390x

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/1297>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-s390x-m64/.git/tree/?h=gdb-7.10-branch&id=bef23ff629c4b45bd6fc7cd5d02ed336259780ac>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/siginfo-thread.exp: Extract si_errno
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.base/gnu_vector.exp: finish shows vector return value
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
PASS -> FAIL: gdb.base/siginfo-thread.exp: Extract si_errno
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
PASS -> FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: tfind 0 again
PASS -> FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: -trace-find frame-number 0
============================

Failures on Fedora-ppc64be-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-cc-with-index/builds/1677>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=1ab29b702ebbbb8eee465cf72f9458e319c4d97e>

*** Regressions found ***
============================
new FAIL: gdb.reverse/until-precsave.exp: Kill process, prepare to debug log file (timeout)
new FAIL: gdb.reverse/until-precsave.exp: reload core file (timeout)
new FAIL: gdb.reverse/until-precsave.exp: until line number (timeout)
new FAIL: gdb.reverse/until-precsave.exp: advance to factorial (timeout)
new FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (got interactive prompt)
PASS -> FAIL: gdb.reverse/until-precsave.exp: finish to main
PASS -> FAIL: gdb.reverse/until-precsave.exp: advance to marker2
new FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (got interactive prompt)
PASS -> FAIL: gdb.reverse/until-precsave.exp: set reverse execution
new FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2 (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (the program is no longer running)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/default.exp: info set (timeout)
new FAIL: gdb.base/default.exp: info symbol (timeout)
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
new FAIL: gdb.base/gnu_vector.exp: call add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: call add_various_floatvecs
new FAIL: gdb.base/gnu_vector.exp: finish shows vector return value
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
new FAIL: gdb.reverse/until-precsave.exp: run to end of main (timeout)
new FAIL: gdb.reverse/until-precsave.exp: save process recfile (timeout)
new FAIL: gdb.reverse/until-precsave.exp: Kill process, prepare to debug log file (timeout)
new FAIL: gdb.reverse/until-precsave.exp: reload core file (timeout)
new FAIL: gdb.reverse/until-precsave.exp: until line number (timeout)
new FAIL: gdb.reverse/until-precsave.exp: advance to factorial (timeout)
new FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (got interactive prompt)
PASS -> FAIL: gdb.reverse/until-precsave.exp: finish to main
PASS -> FAIL: gdb.reverse/until-precsave.exp: advance to marker2
new FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (got interactive prompt)
PASS -> FAIL: gdb.reverse/until-precsave.exp: set reverse execution
new FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2 (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (the program is no longer running)
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (the program exited)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================

Failures on Fedora-ppc64be-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-m64/builds/1680>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-m64/.git/tree/?h=gdb-7.10-branch&id=b765160d460cee8ff4fccfc7f27bf0ea8e2372ab>

*** Regressions found ***
============================
new FAIL: gdb.base/default.exp: info set (timeout)
new FAIL: gdb.base/default.exp: info symbol (timeout)
new FAIL: gdb.reverse/until-precsave.exp: run to end of main (timeout)
new FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited)
PASS -> FAIL: gdb.threads/manythreads.exp: stop threads 2
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/default.exp: info set (timeout)
new FAIL: gdb.base/default.exp: info symbol (timeout)
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
new FAIL: gdb.base/gnu_vector.exp: call add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: call add_various_floatvecs
new FAIL: gdb.base/gnu_vector.exp: finish shows vector return value
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
new FAIL: gdb.reverse/until-precsave.exp: run to end of main (timeout)
new FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited)
PASS -> FAIL: gdb.threads/manythreads.exp: stop threads 2
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (the program exited)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================

Failures on Fedora-ppc64be-native-gdbserver-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-gdbserver-m64/builds/1677>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-native-gdbserver-m64/.git/tree/?h=gdb-7.10-branch&id=2f7d23698794bf2fa8981b196566a41671be684b>

*** Regressions found ***
============================
new FAIL: gdb.base/auxv.exp: continue (timeout)
new FAIL: gdb.base/auxv.exp: load core file for info auxv on gcore-created dump (timeout)
new FAIL: gdb.base/auxv.exp: info auxv on gcore-created dump (timeout)
PASS -> FAIL: gdb.base/auxv.exp: matching auxv data from live and gcore
new FAIL: gdb.base/interrupt.exp: echo data (the program exited)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=on: Can't run to main
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/array_return.exp: value printed by finish of Create_Small
new FAIL: gdb.ada/array_return.exp: value printed by finish of Create_Large
new FAIL: gdb.ada/array_return.exp: value printed by finish of Create_Small_Float_Vector
new FAIL: gdb.ada/call_pn.exp: print pn (4321)
new FAIL: gdb.ada/call_pn.exp: print last_node_id after calling pn
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.ada/interface.exp: print s
new FAIL: gdb.ada/iwide.exp: print My_Drawable
new FAIL: gdb.ada/iwide.exp: print s_access.all
new FAIL: gdb.ada/iwide.exp: print sp_access.all
new FAIL: gdb.ada/iwide.exp: print d_access.all
new FAIL: gdb.ada/iwide.exp: print dp_access.all
new FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
new FAIL: gdb.ada/mi_interface.exp: list ggg1's children
new FAIL: gdb.ada/ptype_tagged_param.exp: ptype s
new FAIL: gdb.ada/ref_param.exp: frame argument value printed
new FAIL: gdb.ada/set_pckd_arr_elt.exp: continue to update_small
new FAIL: gdb.ada/tagged_access.exp: ptype c.all
new FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
new FAIL: gdb.ada/tagged.exp: ptype obj
new FAIL: gdb.ada/tagged.exp: print obj
new FAIL: gdb.ada/watch_arg.exp: Continuing to second breakpoint
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.base/auxv.exp: continue (timeout)
new FAIL: gdb.base/auxv.exp: load core file for info auxv on gcore-created dump (timeout)
new FAIL: gdb.base/auxv.exp: info auxv on gcore-created dump (timeout)
PASS -> FAIL: gdb.base/auxv.exp: matching auxv data from live and gcore
new FAIL: gdb.base/callfuncs.exp: print *((int *(*) (void)) voidfunc)()
new FAIL: gdb.base/callfuncs.exp: noproto: print *((int *(*) (void)) voidfunc)()
new FAIL: gdb.base/commands.exp: continue with watch
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/default.exp: info set (timeout)
new FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp
new FAIL: gdb.base/display.exp: next hit
new FAIL: gdb.base/func-ptrs.exp: continue to decr
new FAIL: gdb.base/func-ptrs.exp: stop in sentinel
new FAIL: gdb.base/func-ptrs.exp: move up to decr
new FAIL: gdb.base/func-ptrs.exp: go back to main from decr (the program is no longer running)
new FAIL: gdb.base/func-ptrs.exp: set calc to incr
new FAIL: gdb.base/func-ptrs.exp: continue to incr, second time (the program is no longer running)
new FAIL: gdb.base/func-ptrs.exp: go back to main from incr, second time (the program is no longer running)
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
new FAIL: gdb.base/gdbindex-stabs.exp: list stabs_function
new FAIL: gdb.base/gnu-debugdata.exp: have symtab
new FAIL: gdb.base/gnu_vector.exp: call add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: call add_various_floatvecs
new FAIL: gdb.base/gnu_vector.exp: finish shows vector return value
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/interrupt.exp: echo data (the program exited)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.base/jit.exp: one_jit_test-1: info function ^jit_function
new FAIL: gdb.base/jit.exp: one_jit_test-2: info function ^jit_function
new FAIL: gdb.base/jit.exp: PIE: one_jit_test-1: info function ^jit_function
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 1
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2
new FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 1
new FAIL: gdb.base/jit-so.exp: one_jit_test-2: info function jit_function
new FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2
new FAIL: gdb.base/pc-fp.exp: info register pc fp
new FAIL: gdb.base/pr11022.exp: breakpoint hit
new FAIL: gdb.base/pr11022.exp: watchpoint hit
new FAIL: gdb.base/pr11022.exp: breakpoint hit 2
new FAIL: gdb.base/pr11022.exp: watchpoint hit 2
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
new FAIL: gdb.base/recurse.exp: next over b = 0 in second instance
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
new FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: bar (the program exited)
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: foo (the program is no longer running)
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: gdb_remove_symbol_file (the program is no longer running)
new FAIL: gdb.base/sym-file.exp: info files must not display sym-file-lib
new FAIL: gdb.base/sym-file.exp: breakpoint at foo is pending
new FAIL: gdb.base/sym-file.exp: breakpoint at bar is pending
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: reload (the program is no longer running)
new FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: gdb_add_symbol_file (the program is no longer running)
new FAIL: gdb.base/sym-file.exp: stale bkpts: add-symbol-file sym-file-lib.so addr
new FAIL: gdb.base/sym-file.exp: stale bkpts: breakpoint at baz is pending
new FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: end here (the program is no longer running)
new FAIL: gdb.base/until-nodebug.exp: until 1
new FAIL: gdb.base/until-nodebug.exp: until 2
new FAIL: gdb.base/value-double-free.exp: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: continue until exit
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
new FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint at func1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
new FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: back at main from marker1
new FAIL: gdb.base/watchpoint.exp: next to `for' in watchpoint.exp
new FAIL: gdb.base/watchpoint.exp: until to ival1 assignment
new FAIL: gdb.base/watchpoint.exp: until to ival3 assignment
new FAIL: gdb.base/watchpoint.exp: until out of loop
new FAIL: gdb.base/watchpoint.exp: step to ival2 assignment
new FAIL: gdb.base/watchpoint.exp: Test complex watchpoint
new FAIL: gdb.base/watchpoint.exp: did not trigger wrong watchpoint
new FAIL: gdb.base/watchpoint.exp: trigger local watch
new FAIL: gdb.base/watchpoint.exp: self-delete local watch
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here <<2>>
new FAIL: gdb.base/watchpoint.exp: trigger1 partially local watch
new FAIL: gdb.base/watchpoint.exp: trigger2 partially local watch
new FAIL: gdb.base/watchpoint.exp: self-delete partially local watch
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here <<3>>
new FAIL: gdb.base/watchpoint.exp: trigger static local watch
new FAIL: gdb.base/watchpoint.exp: continue after trigger static local watch
new FAIL: gdb.base/watchpoint.exp: cont
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: cont <<2>>
new FAIL: gdb.base/watchpoint.exp: cont <<3>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization <<2>>
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program exited)
new FAIL: gdb.base/watchpoint.exp: global_ptr next
new FAIL: gdb.base/watchpoint.exp: next over ptr init
new FAIL: gdb.base/watchpoint.exp: next over buffer set
new FAIL: gdb.base/watchpoint.exp: global_ptr_ptr next
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr init
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr buffer set
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr pointer advance
new FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
new FAIL: gdb.base/watchpoint-solib.exp: continue to foo again
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(i)
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(i) == &typeid(typeof(i))
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(cp)
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(cp) == &typeid(typeof(cp))
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(ccp)
new FAIL: gdb.cp/typeid.exp: before starting: print &typeid(ccp) == &typeid(typeof(ccp))
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/atomic-type.exp: ptype f
new FAIL: gdb.dwarf2/dw2-case-insensitive.exp: p fuNC_symtab
new FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
new FAIL: gdb.mi/mi-async.exp: start: send (MI error)
new FAIL: gdb.mi/mi-async.exp: start: stop (timeout)
new FAIL: gdb.mi/mi-async.exp: CLI next: send (MI error)
new FAIL: gdb.mi/mi-async.exp: CLI next: stop (timeout)
new FAIL: gdb.mi/mi-async.exp: restart: send (MI error)
new FAIL: gdb.mi/mi-async.exp: restart: stop (timeout)
new FAIL: gdb.mi/mi-detach.exp: detach
new FAIL: gdb.mi/mi-var-child.exp: listing of children, simple types: names, type and values, complex types: names and types
new FAIL: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr_ptr in natural
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (MI error) <<2>>
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (timeout) <<2>>
new FAIL: gdb.mi/mi-watch-nonstop.exp: resume 1 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (MI error)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (timeout)
new FAIL: gdb.modula2/unbounded-array.exp: print unbounded array contents
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
new FAIL: gdb.python/py-framefilter.exp: bt for no debuginfo
new FAIL: gdb.python/py-framefilter.exp: bt full for no debuginfo
new FAIL: gdb.python/py-framefilter.exp: bt no filters for no debuginfo
new FAIL: gdb.python/py-framefilter.exp: bt no-filters full no debuginfo
new FAIL: gdb.python/py-objfile.exp: print main without debug info
new FAIL: gdb.python/python.exp: Test find_pc_line with resume address
new FAIL: gdb.python/py-value-cc.exp: u's second field via field
new FAIL: gdb.stabs/gdb11479.exp: Can't run to main forced_stabs
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=on: Can't run to main
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
new FAIL: gdb.threads/wp-replication.exp: No hardware watchpoints available
new FAIL: gdb.trace/entry-values.exp: disassemble bar
new FAIL: gdb.trace/entry-values.exp: Find the call or branch instruction offset in bar
============================

Failures on Fedora-ppc64be-native-extended-gdbserver-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-extended-gdbserver-m64/builds/1680>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-native-extended-gdbserver-m64/.git/tree/?h=gdb-7.10-branch&id=9beb9a01fca58ecb9e16562b54b128b365aa6673>

*** Regressions found ***
============================
new FAIL: gdb.reverse/until-precsave.exp: save process recfile (timeout)
new FAIL: gdb.reverse/until-precsave.exp: reload core file (got interactive prompt)
new FAIL: gdb.reverse/until-precsave.exp: until line number
new FAIL: gdb.reverse/until-precsave.exp: advance to factorial (got interactive prompt)
new FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (the program is no longer running)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/catch-syscall.exp: set tdesc filename /home/gdb-buildbot/fedora-ppc64be-1/fedora-ppc64be-native-extended-gdbserver/build/gdb/testsuite/outputs/gdb.base/catch-syscall/trivial.xml (got interactive prompt)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/func-ptrs.exp: stop in sentinel
new FAIL: gdb.base/gnu_vector.exp: call add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: call add_various_floatvecs
new FAIL: gdb.base/gnu_vector.exp: finish shows vector return value
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.base/interrupt.exp: echo data (timeout)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.base/interrupt.exp: echo more data (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.reverse/until-precsave.exp: reload core file (got interactive prompt)
PASS -> FAIL: gdb.reverse/until-precsave.exp: until line number
new FAIL: gdb.reverse/until-precsave.exp: advance to factorial (got interactive prompt)
new FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: finish to main (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (the program is no longer running)
PASS -> FAIL: gdb.reverse/until-precsave.exp: set reverse execution
new FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2 (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (the program is no longer running)
new FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (the program is no longer running)
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (timeout)
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
============================

Failures on Debian-x86_64-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-x86_64

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-x86_64-m64/builds/1656>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<Error fetching commit ID for 475f4248decaaa6fcd6fbed0b47dd541db640c3f>

Failures on Fedora-ppc64le-native-extended-gdbserver-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-native-extended-gdbserver-m64/builds/1608>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-native-extended-gdbserver-m64/.git/tree/?h=gdb-7.10-branch&id=8d0820e84b5dc789e174218834c62a0ed7ba6711>

*** Regressions found ***
============================
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: inferior 1 exited (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
PASS -> FAIL: gdb.base/attach.exp: attach1, after setting file
new FAIL: gdb.base/attach.exp: attach1 detach (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach2, with no file
PASS -> FAIL: gdb.base/attach.exp: after attach2, set should_exit
new FAIL: gdb.base/attach.exp: continue to breakpoint: postloop (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit at after attach2, exit (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
new FAIL: gdb.base/attach.exp: continue until exit (the program is no longer running)
new FAIL: gdb.base/attach.exp: starting with --pid (timeout)
PASS -> FAIL: gdb.base/attach.exp: cmdline attach run: run to prompt
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: info shared
new FAIL: gdb.base/break.exp: run until breakpoint set at small function, optimized file (the program exited)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
new FAIL: gdb.base/checkpoint.exp: break1 five (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout)
new FAIL: gdb.base/checkpoint.exp: break1 six (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: break1 seven (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<3>>
new FAIL: gdb.base/checkpoint.exp: break1 eight (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<4>>
new FAIL: gdb.base/checkpoint.exp: break1 nine (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<5>>
new FAIL: gdb.base/checkpoint.exp: break1 ten (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<6>>
new FAIL: gdb.base/checkpoint.exp: info checkpoints one (timeout)
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 0 one (timeout)
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 57 (timeout)
new FAIL: gdb.base/checkpoint.exp: break3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: Diff input and output one (timeout)
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 49 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 1 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout)
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 1 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 1 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 2 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 2 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 2 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 3 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<3>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 3 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 3 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 4 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<4>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 4 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 4 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 5 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<5>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 5 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 6 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<6>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 6 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: restart 7 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<7>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 7 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 7 two (timeout)
new FAIL: gdb.base/checkpoint.exp: Diff input and output two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 0 one (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 59 (timeout)
new FAIL: gdb.base/checkpoint.exp: break4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: delete copy1 (timeout)
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: restart 1 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 1 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 2 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 2 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 3 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 3 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 4 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 4 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 5 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 5 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 6 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 6 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 7 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 7 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 8 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 8 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 9 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 9 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 10 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 10 (timeout)
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints (timeout) <<3>>
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork two (timeout)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork three (timeout)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork four (timeout)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork five (timeout)
new FAIL: gdb.base/checkpoint.exp: info checkpoints two (timeout)
new FAIL: gdb.base/checkpoint.exp: kill all one (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 0 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 1 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 2 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 3 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 4 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 5 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 6 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 7 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 8 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 9 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 10 (timeout)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/default.exp: info set (timeout)
new FAIL: gdb.base/interrupt.exp: child died when we called func1, skipped rest of tests
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.gdb/selftest.exp: send SIGINT signal to child process (timeout)
new FAIL: gdb.gdb/selftest.exp: backtrace through signal handler (timeout)
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
PASS -> FAIL: gdb.multi/multi-attach.exp: add second inferior
PASS -> FAIL: gdb.multi/multi-attach.exp: switch to second inferior
PASS -> FAIL: gdb.multi/multi-attach.exp: attach to program 2
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-sync-interp.exp: attach and where
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 1
new FAIL: gdb.server/ext-attach.exp: detach (the program is no longer running)
PASS -> FAIL: gdb.server/ext-attach.exp: attach to remote program 2
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 2
PASS -> FAIL: gdb.server/ext-attach.exp: monitor exit
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<2>>
PASS -> FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attach (pass 1), pending signal catch
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attach (pass 1), pending signal catch <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<2>>
PASS -> FAIL: gdb.threads/attach-into-signal.exp: threaded: attach (pass 1), pending signal catch
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attach (pass 1), pending signal catch <<2>>
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-stopped.exp: nonthreaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/attach-stopped.exp: threaded: attach2 to stopped bt
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (timeout)
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
============================

Failures on Fedora-ppc64le-native-gdbserver-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-native-gdbserver-m64/builds/1602>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-native-gdbserver-m64/.git/tree/?h=gdb-7.10-branch&id=304a4c98d2bd8c6a061dbb1d64d38873a8ac779f>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.base/break.exp: run until breakpoint set at small function, optimized file (the program exited)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/default.exp: info set (timeout)
new FAIL: gdb.base/exitsignal.exp: program terminated with SIGSEGV (timeout)
new FAIL: gdb.base/exitsignal.exp: $_exitsignal is 11 (SIGSEGV) after SIGSEGV. (timeout)
new FAIL: gdb.base/exitsignal.exp: $_exitcode is still void after SIGSEGV (timeout)
new FAIL: gdb.base/interrupt.exp: child died when we called func1, skipped rest of tests
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.mi/mi-detach.exp: detach
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: Can't run to main
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================

Failures on Fedora-ppc64le-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-m64/builds/1598>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-m64/.git/tree/?h=gdb-7.10-branch&id=0973b1a562e614ac5920592588c53573fe5f12a0>

*** Regressions found ***
============================
new FAIL: gdb.trace/entry-values.exp: bt (1) (pattern 1)
new FAIL: gdb.trace/entry-values.exp: bt (2) (pattern 1)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
PASS -> FAIL: gdb.base/attach.exp: attach1, after setting file
new FAIL: gdb.base/attach.exp: attach1 detach (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach2, with no file
PASS -> FAIL: gdb.base/attach.exp: after attach2, set should_exit
new FAIL: gdb.base/attach.exp: continue to breakpoint: postloop (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit at after attach2, exit (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
new FAIL: gdb.base/attach.exp: continue until exit (the program is no longer running)
new FAIL: gdb.base/attach.exp: starting with --pid (timeout)
PASS -> FAIL: gdb.base/attach.exp: cmdline attach run: run to prompt
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: attach
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: info shared
PASS -> FAIL: gdb.base/attach-twice.exp: attach
new FAIL: gdb.base/break.exp: run until breakpoint set at small function, optimized file (the program exited)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/commands.exp: continue with watch
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/default.exp: info set (timeout)
new FAIL: gdb.base/default.exp: info symbol (timeout)
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors(execute_command, "python print(5)", 0)
PASS -> FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.python/py-sync-interp.exp: attach and where
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 1
new FAIL: gdb.server/ext-attach.exp: detach (the program is no longer running)
PASS -> FAIL: gdb.server/ext-attach.exp: attach to remote program 2
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 2
PASS -> FAIL: gdb.server/ext-attach.exp: monitor exit
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-stopped.exp: nonthreaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/attach-stopped.exp: threaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (the program exited)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================

Failures on Debian-i686, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/1656>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=gdb-7.10-branch&id=744e6b84a0e3ed698584c43856113d1c6c03b740>

*** Regressions found ***
============================
new FAIL: gdb.ada/info_exc.exp: info exceptions (timeout)
new FAIL: gdb.ada/info_exc.exp: info exceptions task (timeout)
new FAIL: gdb.ada/info_exc.exp: info exceptions global_gdb (timeout)
new FAIL: gdb.ada/info_exc.exp: info exceptions const.aint (timeout)
new FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions (timeout)
new FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions task (timeout)
PASS -> FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions global_gdb
PASS -> FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions const.aint
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
new FAIL: gdb.java/jprint.exp: continue to breakpoint: jprint.main(java.lang.String[]) (timeout)
PASS -> FAIL: gdb.java/jprint.exp: unambiguous static call
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (timeout)
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/info_exc.exp: info exceptions (timeout)
new FAIL: gdb.ada/info_exc.exp: info exceptions task (timeout)
new FAIL: gdb.ada/info_exc.exp: info exceptions global_gdb (timeout)
new FAIL: gdb.ada/info_exc.exp: info exceptions const.aint (timeout)
new FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions (timeout)
new FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions task (timeout)
PASS -> FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions global_gdb
PASS -> FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions const.aint
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.arch/i386-biarch-core.exp: core-file
new FAIL: gdb.arch/i386-biarch-core.exp: .text is readable
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
new FAIL: gdb.java/jprint.exp: continue to breakpoint: jprint.main(java.lang.String[]) (timeout)
PASS -> FAIL: gdb.java/jprint.exp: unambiguous static call
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (timeout)
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================

Failures on Debian-i686-native-gdbserver, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686-native-gdbserver/builds/1644>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-gdbserver/.git/tree/?h=gdb-7.10-branch&id=56009a1a6790ac6d4019d2224166ab08f82a67e2>

*** Regressions found ***
============================
new FAIL: gdb.java/jmisc.exp: continue to breakpoint: jmisc.main(java.lang.String[]) (timeout)
PASS -> FAIL: gdb.java/jmisc.exp: ptype jmisc
new FAIL: gdb.java/jprint.exp: setting breakpoint at jprint.main(java.lang.String[])void
PASS -> FAIL: gdb.java/jprint.exp: continue to breakpoint: jprint.main(java.lang.String[])
PASS -> FAIL: gdb.java/jprint.exp: unambiguous static call
PASS -> FAIL: gdb.java/jprint.exp: single argument call
PASS -> FAIL: gdb.java/jprint.exp: double argument call
PASS -> FAIL: gdb.java/jprint.exp: virtual fn call
PASS -> FAIL: gdb.java/jprint.exp: inherited static call
PASS -> FAIL: gdb.java/jprint.exp: inherited virtual fn call
XFAIL -> FAIL: gdb.java/jprint.exp: print a java.lang.String
new FAIL: gdb.linespec/break-ask.exp: expect breakpoint (timeout)
new FAIL: gdb.linespec/break-ask.exp: info source (timeout)
PASS -> FAIL: gdb.linespec/break-ask.exp: continue to breakpoint: body_elsewhere
PASS -> FAIL: gdb.linespec/break-ask.exp: info source other
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.arch/i386-biarch-core.exp: core-file
new FAIL: gdb.arch/i386-biarch-core.exp: .text is readable
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
PASS -> FAIL: gdb.base/gnu-ifunc.exp: step
new FAIL: gdb.java/jmisc.exp: continue to breakpoint: jmisc.main(java.lang.String[]) (timeout)
PASS -> FAIL: gdb.java/jmisc.exp: ptype jmisc
new FAIL: gdb.java/jprint.exp: setting breakpoint at jprint.main(java.lang.String[])void
PASS -> FAIL: gdb.java/jprint.exp: continue to breakpoint: jprint.main(java.lang.String[])
PASS -> FAIL: gdb.java/jprint.exp: unambiguous static call
PASS -> FAIL: gdb.java/jprint.exp: single argument call
PASS -> FAIL: gdb.java/jprint.exp: double argument call
PASS -> FAIL: gdb.java/jprint.exp: virtual fn call
PASS -> FAIL: gdb.java/jprint.exp: inherited static call
PASS -> FAIL: gdb.java/jprint.exp: inherited virtual fn call
XFAIL -> FAIL: gdb.java/jprint.exp: print a java.lang.String
new FAIL: gdb.linespec/break-ask.exp: expect breakpoint (timeout)
new FAIL: gdb.linespec/break-ask.exp: info source (timeout)
PASS -> FAIL: gdb.linespec/break-ask.exp: continue to breakpoint: body_elsewhere
PASS -> FAIL: gdb.linespec/break-ask.exp: info source other
new FAIL: gdb.mi/mi-detach.exp: detach
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================

Failures on Debian-i686-native-extended-gdbserver, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686-native-extended-gdbserver/builds/1642>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-extended-gdbserver/.git/tree/?h=gdb-7.10-branch&id=34d278ac23f93858c60a77e835d4aef1af2a4f4e>

*** Regressions found ***
============================
new FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions (timeout)
PASS -> FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions task
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
new FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (the program exited)
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
new FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions (timeout)
PASS -> FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions task
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.arch/i386-biarch-core.exp: core-file
new FAIL: gdb.arch/i386-biarch-core.exp: .text is readable
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/gnu-ifunc.exp: step
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (the program exited)
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================

Failures on Debian-MIPS-m64, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-mips-be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-MIPS-m64/builds/303>

Commit(s) tested:
	475f4248decaaa6fcd6fbed0b47dd541db640c3f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	[amd64] Invalid return address after displaced stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<Error fetching commit ID for 475f4248decaaa6fcd6fbed0b47dd541db640c3f>

*** Failed to compiled GDB.  ***
============================

+++ The full log is too big to be posted here.
+++ These are the last 100 lines of it.

      -e 's|@''REPLACE_WCSRTOMBS''@|0|g' \
      -e 's|@''REPLACE_WCSNRTOMBS''@|0|g' \
      -e 's|@''REPLACE_WCWIDTH''@|0|g' \
      -e 's|@''REPLACE_WCSWIDTH''@|0|g' \
      -e '/definitions of _GL_FUNCDECL_RPL/r c++defs.h' \
      -e '/definition of _GL_ARG_NONNULL/r arg-nonnull.h' \
      -e '/definition of _GL_WARN_ON_USE/r warn-on-use.h'; \
} > wchar.h-t && \
mv wchar.h-t wchar.h
rm -f wctype.h-t wctype.h && \
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
  sed -e 's|@''GUARD_PREFIX''@|GL|g' \
      -e 's/@''HAVE_WCTYPE_H''@/1/g' \
      -e 's|@''INCLUDE_NEXT''@|include_next|g' \
      -e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \
      -e 's|@''PRAGMA_COLUMNS''@||g' \
      -e 's|@''NEXT_WCTYPE_H''@|<wctype.h>|g' \
      -e 's/@''GNULIB_ISWBLANK''@/0/g' \
      -e 's/@''GNULIB_WCTYPE''@/0/g' \
      -e 's/@''GNULIB_ISWCTYPE''@/0/g' \
      -e 's/@''GNULIB_WCTRANS''@/0/g' \
      -e 's/@''GNULIB_TOWCTRANS''@/0/g' \
      -e 's/@''HAVE_ISWBLANK''@/1/g' \
      -e 's/@''HAVE_ISWCNTRL''@/1/g' \
      -e 's/@''HAVE_WCTYPE_T''@/1/g' \
      -e 's/@''HAVE_WCTRANS_T''@/1/g' \
      -e 's/@''HAVE_WINT_T''@/1/g' \
      -e 's/@''REPLACE_ISWBLANK''@/0/g' \
      -e 's/@''REPLACE_ISWCNTRL''@/0/g' \
      -e 's/@''REPLACE_TOWLOWER''@/0/g' \
      -e '/definitions of _GL_FUNCDECL_RPL/r c++defs.h' \
      -e '/definition of _GL_WARN_ON_USE/r warn-on-use.h' \
      < ../../../../binutils-gdb/gdb/gnulib/import/wctype.in.h; \
} > wctype.h-t && \
mv wctype.h-t wctype.h
make  all-recursive
make[7]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import'
make[8]: Entering directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import'
gcc -DHAVE_CONFIG_H -I. -I../../../../binutils-gdb/gdb/gnulib/import -I..     -g -O2 -MT dirname-lgpl.o -MD -MP -MF .deps/dirname-lgpl.Tpo -c -o dirname-lgpl.o ../../../../binutils-gdb/gdb/gnulib/import/dirname-lgpl.c
mv -f .deps/dirname-lgpl.Tpo .deps/dirname-lgpl.Po
gcc -DHAVE_CONFIG_H -I. -I../../../../binutils-gdb/gdb/gnulib/import -I..     -g -O2 -MT basename-lgpl.o -MD -MP -MF .deps/basename-lgpl.Tpo -c -o basename-lgpl.o ../../../../binutils-gdb/gdb/gnulib/import/basename-lgpl.c
mv -f .deps/basename-lgpl.Tpo .deps/basename-lgpl.Po
gcc -DHAVE_CONFIG_H -I. -I../../../../binutils-gdb/gdb/gnulib/import -I..     -g -O2 -MT stripslash.o -MD -MP -MF .deps/stripslash.Tpo -c -o stripslash.o ../../../../binutils-gdb/gdb/gnulib/import/stripslash.c
mv -f .deps/stripslash.Tpo .deps/stripslash.Po
gcc -DHAVE_CONFIG_H -I. -I../../../../binutils-gdb/gdb/gnulib/import -I..     -g -O2 -MT localcharset.o -MD -MP -MF .deps/localcharset.Tpo -c -o localcharset.o ../../../../binutils-gdb/gdb/gnulib/import/localcharset.c
mv -f .deps/localcharset.Tpo .deps/localcharset.Po
gcc -DHAVE_CONFIG_H -I. -I../../../../binutils-gdb/gdb/gnulib/import -I..     -g -O2 -MT malloca.o -MD -MP -MF .deps/malloca.Tpo -c -o malloca.o ../../../../binutils-gdb/gdb/gnulib/import/malloca.c
mv -f .deps/malloca.Tpo .deps/malloca.Po
gcc -DHAVE_CONFIG_H -I. -I../../../../binutils-gdb/gdb/gnulib/import -I..     -g -O2 -MT math.o -MD -MP -MF .deps/math.Tpo -c -o math.o ../../../../binutils-gdb/gdb/gnulib/import/math.c
mv -f .deps/math.Tpo .deps/math.Po
gcc -DHAVE_CONFIG_H -I. -I../../../../binutils-gdb/gdb/gnulib/import -I..     -g -O2 -MT stdio.o -MD -MP -MF .deps/stdio.Tpo -c -o stdio.o ../../../../binutils-gdb/gdb/gnulib/import/stdio.c
mv -f .deps/stdio.Tpo .deps/stdio.Po
gcc -DHAVE_CONFIG_H -I. -I../../../../binutils-gdb/gdb/gnulib/import -I..     -g -O2 -MT strnlen1.o -MD -MP -MF .deps/strnlen1.Tpo -c -o strnlen1.o ../../../../binutils-gdb/gdb/gnulib/import/strnlen1.c
mv -f .deps/strnlen1.Tpo .deps/strnlen1.Po
gcc -DHAVE_CONFIG_H -I. -I../../../../binutils-gdb/gdb/gnulib/import -I..     -g -O2 -MT unistd.o -MD -MP -MF .deps/unistd.Tpo -c -o unistd.o ../../../../binutils-gdb/gdb/gnulib/import/unistd.c
mv -f .deps/unistd.Tpo .deps/unistd.Po
gcc -DHAVE_CONFIG_H -I. -I../../../../binutils-gdb/gdb/gnulib/import -I..     -g -O2 -MT wctype-h.o -MD -MP -MF .deps/wctype-h.Tpo -c -o wctype-h.o ../../../../binutils-gdb/gdb/gnulib/import/wctype-h.c
mv -f .deps/wctype-h.Tpo .deps/wctype-h.Po
rm -f libgnu.a
ar cru libgnu.a dirname-lgpl.o basename-lgpl.o stripslash.o localcharset.o malloca.o math.o stdio.o strnlen1.o unistd.o wctype-h.o  
ranlib libgnu.a
rm -f t-charset.alias charset.alias && \
/bin/bash ../../../../binutils-gdb/gdb/gnulib/import/config.charset 'mips64-unknown-linux-gnu' > t-charset.alias && \
mv t-charset.alias charset.alias
rm -f t-ref-add.sed ref-add.sed && \
sed -e '/^#/d' -e 's/@''PACKAGE''@/libgnu/g' ../../../../binutils-gdb/gdb/gnulib/import/ref-add.sin > t-ref-add.sed && \
mv t-ref-add.sed ref-add.sed
rm -f t-ref-del.sed ref-del.sed && \
sed -e '/^#/d' -e 's/@''PACKAGE''@/libgnu/g' ../../../../binutils-gdb/gdb/gnulib/import/ref-del.sin > t-ref-del.sed && \
mv t-ref-del.sed ref-del.sed
make[8]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import'
make[7]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import'
make[6]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib/import'
make[5]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib'
make[4]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb/build-gnulib'
make[3]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb'
gcc -g -O2   -I. -I../../binutils-gdb/gdb -I../../binutils-gdb/gdb/common -I../../binutils-gdb/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../binutils-gdb/gdb/../include/opcode -I../../binutils-gdb/gdb/../opcodes/.. -I../../binutils-gdb/gdb/../readline/.. -I../../binutils-gdb/gdb/../zlib -I../bfd -I../../binutils-gdb/gdb/../bfd -I../../binutils-gdb/gdb/../include -I../libdecnumber -I../../binutils-gdb/gdb/../libdecnumber  -I../../binutils-gdb/gdb/gnulib/import -Ibuild-gnulib/import    -I/usr/include/python2.7 -I/usr/include/python2.7 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wpointer-sign -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wold-style-declaration -Wold-style-definition -Wformat-nonliteral  -c -o gdb.o -MT gdb.o -MMD -MP -MF .deps/gdb.Tpo ../../binutils-gdb/gdb/gdb.c
gcc -g -O2   -I. -I../../binutils-gdb/gdb -I../../binutils-gdb/gdb/common -I../../binutils-gdb/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../binutils-gdb/gdb/../include/opcode -I../../binutils-gdb/gdb/../opcodes/.. -I../../binutils-gdb/gdb/../readline/.. -I../../binutils-gdb/gdb/../zlib -I../bfd -I../../binutils-gdb/gdb/../bfd -I../../binutils-gdb/gdb/../include -I../libdecnumber -I../../binutils-gdb/gdb/../libdecnumber  -I../../binutils-gdb/gdb/gnulib/import -Ibuild-gnulib/import    -I/usr/include/python2.7 -I/usr/include/python2.7 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wpointer-sign -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wold-style-declaration -Wold-style-definition -Wformat-nonliteral  -c -o armbsd-tdep.o -MT armbsd-tdep.o -MMD -MP -MF .deps/armbsd-tdep.Tpo ../../binutils-gdb/gdb/armbsd-tdep.c
gcc -g -O2   -I. -I../../binutils-gdb/gdb -I../../binutils-gdb/gdb/common -I../../binutils-gdb/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../binutils-gdb/gdb/../include/opcode -I../../binutils-gdb/gdb/../opcodes/.. -I../../binutils-gdb/gdb/../readline/.. -I../../binutils-gdb/gdb/../zlib -I../bfd -I../../binutils-gdb/gdb/../bfd -I../../binutils-gdb/gdb/../include -I../libdecnumber -I../../binutils-gdb/gdb/../libdecnumber  -I../../binutils-gdb/gdb/gnulib/import -Ibuild-gnulib/import    -I/usr/include/python2.7 -I/usr/include/python2.7 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wpointer-sign -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wold-style-declaration -Wold-style-definition -Wformat-nonliteral  -c -o arm-linux-tdep.o -MT arm-linux-tdep.o -MMD -MP -MF .deps/arm-linux-tdep.Tpo ../../binutils-gdb/gdb/arm-linux-tdep.c
gcc -g -O2   -I. -I../../binutils-gdb/gdb -I../../binutils-gdb/gdb/common -I../../binutils-gdb/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../binutils-gdb/gdb/../include/opcode -I../../binutils-gdb/gdb/../opcodes/.. -I../../binutils-gdb/gdb/../readline/.. -I../../binutils-gdb/gdb/../zlib -I../bfd -I../../binutils-gdb/gdb/../bfd -I../../binutils-gdb/gdb/../include -I../libdecnumber -I../../binutils-gdb/gdb/../libdecnumber  -I../../binutils-gdb/gdb/gnulib/import -Ibuild-gnulib/import    -I/usr/include/python2.7 -I/usr/include/python2.7 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wpointer-sign -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wold-style-declaration -Wold-style-definition -Wformat-nonliteral  -c -o arm-symbian-tdep.o -MT arm-symbian-tdep.o -MMD -MP -MF .deps/arm-symbian-tdep.Tpo ../../binutils-gdb/gdb/arm-symbian-tdep.c
gcc -g -O2   -I. -I../../binutils-gdb/gdb -I../../binutils-gdb/gdb/common -I../../binutils-gdb/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../binutils-gdb/gdb/../include/opcode -I../../binutils-gdb/gdb/../opcodes/.. -I../../binutils-gdb/gdb/../readline/.. -I../../binutils-gdb/gdb/../zlib -I../bfd -I../../binutils-gdb/gdb/../bfd -I../../binutils-gdb/gdb/../include -I../libdecnumber -I../../binutils-gdb/gdb/../libdecnumber  -I../../binutils-gdb/gdb/gnulib/import -Ibuild-gnulib/import    -I/usr/include/python2.7 -I/usr/include/python2.7 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wpointer-sign -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wold-style-declaration -Wold-style-definition -Wformat-nonliteral  -c -o armnbsd-tdep.o -MT armnbsd-tdep.o -MMD -MP -MF .deps/armnbsd-tdep.Tpo ../../binutils-gdb/gdb/armnbsd-tdep.c
gcc -g -O2   -I. -I../../binutils-gdb/gdb -I../../binutils-gdb/gdb/common -I../../binutils-gdb/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../binutils-gdb/gdb/../include/opcode -I../../binutils-gdb/gdb/../opcodes/.. -I../../binutils-gdb/gdb/../readline/.. -I../../binutils-gdb/gdb/../zlib -I../bfd -I../../binutils-gdb/gdb/../bfd -I../../binutils-gdb/gdb/../include -I../libdecnumber -I../../binutils-gdb/gdb/../libdecnumber  -I../../binutils-gdb/gdb/gnulib/import -Ibuild-gnulib/import    -I/usr/include/python2.7 -I/usr/include/python2.7 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wpointer-sign -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wold-style-declaration -Wold-style-definition -Wformat-nonliteral  -c -o armobsd-tdep.o -MT armobsd-tdep.o -MMD -MP -MF .deps/armobsd-tdep.Tpo ../../binutils-gdb/gdb/armobsd-tdep.c
gcc -g -O2   -I. -I../../binutils-gdb/gdb -I../../binutils-gdb/gdb/common -I../../binutils-gdb/gdb/config -DLOCALEDIR="\"/usr/local/share/locale\"" -DHAVE_CONFIG_H -I../../binutils-gdb/gdb/../include/opcode -I../../binutils-gdb/gdb/../opcodes/.. -I../../binutils-gdb/gdb/../readline/.. -I../../binutils-gdb/gdb/../zlib -I../bfd -I../../binutils-gdb/gdb/../bfd -I../../binutils-gdb/gdb/../include -I../libdecnumber -I../../binutils-gdb/gdb/../libdecnumber  -I../../binutils-gdb/gdb/gnulib/import -Ibuild-gnulib/import    -I/usr/include/python2.7 -I/usr/include/python2.7 -Wall -Wpointer-arith -Wno-unused -Wunused-value -Wunused-function -Wno-switch -Wno-char-subscripts -Wempty-body -Wpointer-sign -Wmissing-prototypes -Wdeclaration-after-statement -Wmissing-parameter-type -Wold-style-declaration -Wold-style-definition -Wformat-nonliteral  -c -o arm-tdep.o -MT arm-tdep.o -MMD -MP -MF .deps/arm-tdep.Tpo ../../binutils-gdb/gdb/arm-tdep.c
../../binutils-gdb/gdb/arm-tdep.c: In function bx_write_pc:
../../binutils-gdb/gdb/arm-tdep.c:14016:1: internal compiler error: Segmentation fault
 }
 ^
Please submit a full bug report,
with preprocessed source if appropriate.
See <file:///usr/share/doc/gcc-4.9/README.Bugs> for instructions.
The bug is not reproducible, so it is likely a hardware or OS problem.
Makefile:1133: recipe for target 'arm-tdep.o' failed
make[2]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build/gdb'
make[2]: *** [arm-tdep.o] Error 1
Makefile:8756: recipe for target 'all-gdb' failed
make[1]: Leaving directory '/mips/proj/build-compiler/upstream-testing/mipsswbrd048/GDB-testing/debian-mips-m64/build'
make[1]: *** [all-gdb] Error 2
Makefile:846: recipe for target 'all' failed
make: *** [all] Error 2
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/2540>

Commit(s) tested:
	c2bb526a220f4d79f698fca33ba57fe1f81aba9f

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set GDB version number to 7.10.1.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=0b0949df151a79ae616e73aeb145cedf4bcea67b>

*** Regressions found ***
============================
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/2496>

Commit(s) tested:
	9a2752c7f09d24865b33fedd9ac2585f3cbba3c3

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Adjust GDB to demangler API change

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=a16abb01a4fad71411157b2748a4910f592c34ee>

*** Regressions found ***
============================
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/2495>

Commit(s) tested:
	49037e4a1249890812a8d4995c7592774e99c399

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	PR other/61321 - demangler crash on casts in template parameters

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=96d1efb0969e41904911a696782b95f34dd29d74>

*** Regressions found ***
============================
new FAIL: gdb.cp/cpexprs.exp: list base::operator char* (GDB internal error)
new FAIL: gdb.cp/cpexprs.exp: list base::operator fluff* (GDB internal error)
new FAIL: gdb.cp/cpexprs.exp: list base::operator fluff** (GDB internal error)
new FAIL: gdb.cp/cpexprs.exp: list base::operator int (GDB internal error)
new FAIL: gdb.cp/cpexprs.exp: setting breakpoint at base::operator char* (GDB internal error)
PASS -> FAIL: gdb.cp/cpexprs.exp: continue to base::operator char*
new FAIL: gdb.cp/cpexprs.exp: setting breakpoint at base::operator fluff* (GDB internal error)
PASS -> FAIL: gdb.cp/cpexprs.exp: continue to base::operator fluff*
new FAIL: gdb.cp/cpexprs.exp: setting breakpoint at base::operator fluff** (GDB internal error)
PASS -> FAIL: gdb.cp/cpexprs.exp: continue to base::operator fluff**
new FAIL: gdb.cp/cpexprs.exp: setting breakpoint at base::operator int (GDB internal error)
PASS -> FAIL: gdb.cp/cpexprs.exp: continue to base::operator int
new FAIL: gdb.cp/cplusfuncs.exp: list foo::operator int* (GDB internal error)
new FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/cpexprs.exp: list base::operator char* (GDB internal error)
new FAIL: gdb.cp/cpexprs.exp: list base::operator fluff* (GDB internal error)
new FAIL: gdb.cp/cpexprs.exp: list base::operator fluff** (GDB internal error)
new FAIL: gdb.cp/cpexprs.exp: list base::operator int (GDB internal error)
new FAIL: gdb.cp/cpexprs.exp: setting breakpoint at base::operator char* (GDB internal error)
PASS -> FAIL: gdb.cp/cpexprs.exp: continue to base::operator char*
new FAIL: gdb.cp/cpexprs.exp: setting breakpoint at base::operator fluff* (GDB internal error)
PASS -> FAIL: gdb.cp/cpexprs.exp: continue to base::operator fluff*
new FAIL: gdb.cp/cpexprs.exp: setting breakpoint at base::operator fluff** (GDB internal error)
PASS -> FAIL: gdb.cp/cpexprs.exp: continue to base::operator fluff**
new FAIL: gdb.cp/cpexprs.exp: setting breakpoint at base::operator int (GDB internal error)
PASS -> FAIL: gdb.cp/cpexprs.exp: continue to base::operator int
new FAIL: gdb.cp/cplusfuncs.exp: list foo::operator int* (GDB internal error)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited)
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/2493>

Commit(s) tested:
	99eda040d8214d2d691ba804d6354c99b6df5269

Author(s) (in the same order as the commits):
	Ian Lance Taylor <iant@google.com>

Subject:
	Demangler: Fix constructor names with ABI tags

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=1f8532f928d10780026c093802c3064216e90a40>

*** Regressions found ***
============================
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/2460>

Commit(s) tested:
	bab694b7f968cc5703a69df694b5968384d6c0b4

Author(s) (in the same order as the commits):
	Markus Metzger <markus.t.metzger@intel.com>

Subject:
	btrace: diagnose "record btrace pt" without libipt

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=69b367e1a1e2d562aa9b1b549cd2e68717a6d3a3>

*** Regressions found ***
============================
new FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1770>

Commit(s) tested:
	290f582b49a81b7fa01fc430bad1a7f9af21c922

Author(s) (in the same order as the commits):
	Gary Benson <gbenson@redhat.com>

Subject:
	Warn when accessing binaries from remote targets

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=0ed4eb3b9741f68af966c592fff40065f9c4a9f5>

*** Regressions found ***
============================
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
new FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1737>

Commit(s) tested:
	37419df723ec96b600030970e0fe97aaa82fa2e1

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	PR record/18691: Fix fails in solib-precsave.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=20e225e1f4d4ccc52ef572bb272bfdb7e05685c7>

*** Regressions found ***
============================
new FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.threads/clone-new-thread-event.exp: catch SIGUSR1 (the program exited)
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1708>

Commit(s) tested:
	01653c39b80c69ae02396f16cc3306ab8eb8ace0

Author(s) (in the same order as the commits):
	Keith Seitz <keiths@redhat.com>

Subject:
	gdb.base/dso2dso.exp sometimes broken

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=4d47f3b36d1c886a5efc32b2c5275ca300b22fdd>

*** Regressions found ***
============================
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
new FAIL: gdb.base/corefile.exp: core-file warning-free
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1689>

Commit(s) tested:
	835001623351330d49678d215d1338c0ce35c1f9

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	[regression] Do not read from catchpoint/watchpoint locations' addresses when checking for a permanent breakpoint

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=c05caaf5359ebc3db31bf3846b9b473cd1e081b5>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/attach.exp: attach1, after setting file
new FAIL: gdb.base/attach.exp: attach1 detach (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach2, with no file
PASS -> FAIL: gdb.base/attach.exp: after attach2, set should_exit
new FAIL: gdb.base/attach.exp: continue to breakpoint: postloop (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit at after attach2, exit (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
new FAIL: gdb.base/attach.exp: continue until exit (the program is no longer running)
new FAIL: gdb.base/attach.exp: starting with --pid (timeout)
PASS -> FAIL: gdb.base/attach.exp: cmdline attach run: run to prompt
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: attach
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: info shared
PASS -> FAIL: gdb.base/attach-twice.exp: attach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> FAIL: gdb.python/py-sync-interp.exp: attach and where
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 1
new FAIL: gdb.server/ext-attach.exp: detach (the program is no longer running)
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 2
PASS -> FAIL: gdb.server/ext-attach.exp: monitor exit
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-stopped.exp: nonthreaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/attach-stopped.exp: threaded: attach2 to stopped bt
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/attach.exp: attach1, after setting file
new FAIL: gdb.base/attach.exp: attach1 detach (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach2, with no file
PASS -> FAIL: gdb.base/attach.exp: after attach2, set should_exit
new FAIL: gdb.base/attach.exp: continue to breakpoint: postloop (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit at after attach2, exit (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
new FAIL: gdb.base/attach.exp: continue until exit (the program is no longer running)
new FAIL: gdb.base/attach.exp: starting with --pid (timeout)
PASS -> FAIL: gdb.base/attach.exp: cmdline attach run: run to prompt
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: attach
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: info shared
PASS -> FAIL: gdb.base/attach-twice.exp: attach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: re-attach to inferior
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-sync-interp.exp: attach and where
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 1
new FAIL: gdb.server/ext-attach.exp: detach (the program is no longer running)
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 2
PASS -> FAIL: gdb.server/ext-attach.exp: monitor exit
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-stopped.exp: nonthreaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/attach-stopped.exp: threaded: attach2 to stopped bt
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1620>

Commit(s) tested:
	17d1595ac5371d06537bc57df86a9f7359e62127

Author(s) (in the same order as the commits):
	Clem Dickey <clemd@acm.org>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=b52a099434270e1c0baffdda8faa4830b8d28562>

*** Regressions found ***
============================
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
new FAIL: gdb.base/corefile.exp: core-file warning-free
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1608>

Commit(s) tested:
	3a3f16c0cf0fa5a555a688e119bb8b363a2e7d59

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=60434c40f2305ae8c3dd2b3f8c625183842ffcfa>

*** Regressions found ***
============================
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1564>

Commit(s) tested:
	4ccc18f16da05e93aff0c7ac570017d5ef79ef6c

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=12ee8d5a984a24cf41d717e7858bae91a1316784>

*** Regressions found ***
============================
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork (timeout)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork (GDB internal error)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork (timeout)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork (GDB internal error)
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1563>

Commit(s) tested:
	7476be08b73fdfba4eb91d891b235d4cf2e70f3b

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<Error fetching commit ID for 7476be08b73fdfba4eb91d891b235d4cf2e70f3b>

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1562>

Commit(s) tested:
	b31f5e79aac67f61a684c3af281caebd2ac1eece

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=2d7791ef96c393bca9a58471247716dea710f89e>

*** Regressions found ***
============================
new FAIL: gdb.base/corefile.exp: core-file warning-free
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1392>

Commit(s) tested:
	0900c4cec7f75a00cccb3537d754c20f99096686

Author(s) (in the same order as the commits):
	Markus Metzger <markus.t.metzger@intel.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=559e05ffd7506b72481904d093617e5e13723f5b>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/manythreads.exp: stop threads 2
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: attach
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: info shared
PASS -> FAIL: gdb.base/attach-twice.exp: attach
PASS -> FAIL: gdb.base/attach.exp: after attach2, set should_exit
PASS -> FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
new FAIL: gdb.base/attach.exp: attach1 detach (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach1, after setting file
PASS -> FAIL: gdb.base/attach.exp: attach2, with no file
PASS -> FAIL: gdb.base/attach.exp: cmdline attach run: run to prompt
new FAIL: gdb.base/attach.exp: continue to breakpoint: postloop (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit at after attach2, exit (the program is no longer running)
new FAIL: gdb.base/attach.exp: starting with --pid (timeout)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=on: re-attach to inferior
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.python/py-sync-interp.exp: attach and where
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 1
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 2
new FAIL: gdb.server/ext-attach.exp: detach (the program is no longer running)
PASS -> FAIL: gdb.server/ext-attach.exp: monitor exit
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<9>>
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-stopped.exp: nonthreaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/attach-stopped.exp: threaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/manythreads.exp: stop threads 2
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1384>

Commit(s) tested:
	8746ea769d67bf186d582d892cf37da42bc95ea9

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=df112d8d7dc1ee511e1d6f278be9714f2d1d30fb>

*** Regressions found ***
============================
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: attach
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: info shared
PASS -> FAIL: gdb.base/attach-twice.exp: attach
PASS -> FAIL: gdb.base/attach.exp: after attach2, set should_exit
PASS -> FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
new FAIL: gdb.base/attach.exp: attach1 detach (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach1, after setting file
PASS -> FAIL: gdb.base/attach.exp: attach2, with no file
PASS -> FAIL: gdb.base/attach.exp: cmdline attach run: run to prompt
new FAIL: gdb.base/attach.exp: continue to breakpoint: postloop (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit at after attach2, exit (the program is no longer running)
new FAIL: gdb.base/attach.exp: starting with --pid (timeout)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.python/py-sync-interp.exp: attach and where
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 1
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 2
new FAIL: gdb.server/ext-attach.exp: detach (the program is no longer running)
PASS -> FAIL: gdb.server/ext-attach.exp: monitor exit
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<9>>
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-stopped.exp: nonthreaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/attach-stopped.exp: threaded: attach2 to stopped bt
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: attach
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: info shared
PASS -> FAIL: gdb.base/attach-twice.exp: attach
PASS -> FAIL: gdb.base/attach.exp: after attach2, set should_exit
PASS -> FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
new FAIL: gdb.base/attach.exp: attach1 detach (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach1, after setting file
PASS -> FAIL: gdb.base/attach.exp: attach2, with no file
PASS -> FAIL: gdb.base/attach.exp: cmdline attach run: run to prompt
new FAIL: gdb.base/attach.exp: continue to breakpoint: postloop (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit at after attach2, exit (the program is no longer running)
new FAIL: gdb.base/attach.exp: starting with --pid (timeout)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=on: re-attach to inferior
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
PASS -> FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.python/py-sync-interp.exp: attach and where
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 1
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 2
new FAIL: gdb.server/ext-attach.exp: detach (the program is no longer running)
PASS -> FAIL: gdb.server/ext-attach.exp: monitor exit
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: detach (the program is no longer running) <<9>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<100>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<10>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<11>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<12>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<13>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<14>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<15>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<16>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<17>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<18>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<19>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<20>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<21>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<22>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<23>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<24>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<25>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<26>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<27>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<28>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<29>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<2>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<30>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<31>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<32>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<33>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<34>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<35>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<36>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<37>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<38>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<39>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<3>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<40>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<41>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<42>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<43>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<44>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<45>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<46>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<47>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<48>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<49>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<4>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<50>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<51>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<52>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<53>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<54>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<55>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<56>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<57>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<58>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<59>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<5>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<60>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<61>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<62>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<63>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<64>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<65>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<66>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<67>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<68>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<69>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<6>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<70>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<71>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<72>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<73>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<74>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<75>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<76>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<77>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<78>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<79>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<7>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<80>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<81>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<82>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<83>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<84>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<85>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<86>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<87>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<88>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<89>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<8>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<90>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<91>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<92>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<93>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<94>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<95>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<96>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<97>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<98>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<99>>
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo <<9>>
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-stopped.exp: nonthreaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/attach-stopped.exp: threaded: attach2 to stopped bt
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1348>

Commit(s) tested:
	91affdd27ee8e244df417686ead2b546ee1449bf

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=f2981165cafb8a3e77c5e3056326576122e2291f>

*** Regressions found ***
============================
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.asm/asm-source.exp: bt 2 in foo2
PASS -> FAIL: gdb.asm/asm-source.exp: bt 3 in foo3
PASS -> FAIL: gdb.asm/asm-source.exp: bt ALL in foo2
PASS -> FAIL: gdb.asm/asm-source.exp: f at main
PASS -> FAIL: gdb.asm/asm-source.exp: f in foo2
new FAIL: gdb.asm/asm-source.exp: finish from foo3 (the program is no longer running)
PASS -> FAIL: gdb.asm/asm-source.exp: info line
PASS -> FAIL: gdb.asm/asm-source.exp: info source asmsrc2.s
PASS -> FAIL: gdb.asm/asm-source.exp: n in foo2
new FAIL: gdb.asm/asm-source.exp: next over foo3 (the program is no longer running)
PASS -> FAIL: gdb.asm/asm-source.exp: next over macro
PASS -> FAIL: gdb.asm/asm-source.exp: return from foo2
PASS -> FAIL: gdb.asm/asm-source.exp: step into foo2
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.10-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/1330>

Commit(s) tested:
	eec595d37293692ec2f57f6b2f8a8244910b4a48

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.10-branch&id=d72479f4794b7d99d2d897a174edb2400fed45dd>

*** Regressions found ***
============================
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/info_exc.exp: info exceptions
PASS -> FAIL: gdb.asm/asm-source.exp: bt 2 in foo2
PASS -> FAIL: gdb.asm/asm-source.exp: bt 3 in foo3
PASS -> FAIL: gdb.asm/asm-source.exp: bt ALL in foo2
PASS -> FAIL: gdb.asm/asm-source.exp: f at main
PASS -> FAIL: gdb.asm/asm-source.exp: f in foo2
new FAIL: gdb.asm/asm-source.exp: finish from foo3 (the program is no longer running)
PASS -> FAIL: gdb.asm/asm-source.exp: info line
PASS -> FAIL: gdb.asm/asm-source.exp: info source asmsrc2.s
PASS -> FAIL: gdb.asm/asm-source.exp: n in foo2
new FAIL: gdb.asm/asm-source.exp: next over foo3 (the program is no longer running)
PASS -> FAIL: gdb.asm/asm-source.exp: next over macro
PASS -> FAIL: gdb.asm/asm-source.exp: return from foo2
PASS -> FAIL: gdb.asm/asm-source.exp: step into foo2
new FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
new FAIL: gdb.base/gnu_vector.exp: call add_singlevecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: continue to add_some_intvecs (the program is no longer running)
new FAIL: gdb.base/gnu_vector.exp: set vector return value
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-next over solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step back to main two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step into solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function one
PASS -> FAIL: gdb.reverse/solib-precsave.exp: reverse-step within solib function two
PASS -> FAIL: gdb.reverse/solib-precsave.exp: run until end part two
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================