Failures on RHEL-s390x-m64, branch master

Failures on RHEL-s390x-m64, branch master

[sergiodj+buildbot]

Buildslave:
	rhel-7.1-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/RHEL-s390x-m64/builds/55>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/RHEL-s390x-m64/.git/tree/?h=master&id=30c07d1e9b8a6cdd18d5aa1906dcdad3bc275bc9>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/siginfo-thread.exp: Extract si_errno
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.base/siginfo-thread.exp: Extract si_errno
PASS -> FAIL: gdb.threads/watchthreads.exp: threaded watch loop
PASS -> FAIL: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
============================

[binutils-gdb] tui: don't overwrite a secondary prompt that was given no input

[sergiodj+buildbot]

*** TEST RESULTS FOR COMMIT 948578a989f8c666c9b0e92c9a50906724921f14 ***

Author: Patrick Palka <patrick@parcs.ath.cx>
Branch: master
Commit: 948578a989f8c666c9b0e92c9a50906724921f14

tui: don't overwrite a secondary prompt that was given no input

This patch fixes the following bug in TUI:

  (gdb) break foo
  No symbol table is loaded.  Use the "file" command.
  Make breakpoint pending on future shared library load? (y or [n]) <ENTER>

By submitting an empty command line to a secondary prompt, the line
corresponding to the secondary prompt is undesirably cleared and
overwritten.  Outside of a secondary prompt, clearing the prompt line
after submitting an empty command line is intended behavior which
complements GDB's repeat-command shorthand.  But inside a secondary
prompt, this behavior is undesired since the shorthand is not applicable
in that case.  We should retain the secondary-prompt line even when it's
given no input.

This patch makes sure that a prompt that was given an empty command line
is cleared and overwritten only if it's not a secondary prompt.  To
acheive this, a new predicate is defined which informs us whether the
current input handler is a secondary prompt.

gdb/ChangeLog:

	* top.h (gdb_in_secondary_prompt_p): Declare.
	* top.c (gdb_secondary_prompt_depth): Define.
	(gdb_in_secondary_prompt_p): Define.
	(gdb_readline_wrapper_cleanup): Decrement
	gdb_secondary_prompt_depth.
	(gdb_readline_wrapper): Increment gdb_secondary_prompt_depth.
	* tui/tui-io.c (tui_getc): Don't clear the prompt line if we
	are in a secondary prompt.

Failures on Fedora-x86_64-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m32/builds/1805>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-m32/.git/tree/?h=master&id=7e9309674f0e3a6654cd43fc85f40835a0a958b4>

*** Regressions found ***
============================
XFAIL -> FAIL: gdb.ada/fun_renaming.exp: print n(1)
new FAIL: gdb.base/corefile.exp: core-file warning-free
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/interface.exp: print s
FAIL: gdb.ada/iwide.exp: print My_Drawable
FAIL: gdb.ada/iwide.exp: print d_access.all
FAIL: gdb.ada/iwide.exp: print dp_access.all
FAIL: gdb.ada/iwide.exp: print s_access.all
FAIL: gdb.ada/iwide.exp: print sp_access.all
FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
FAIL: gdb.ada/mi_interface.exp: list ggg1's children
FAIL: gdb.ada/ptype_tagged_param.exp: ptype s
FAIL: gdb.ada/str_uninit.exp: print my_str
FAIL: gdb.ada/tagged.exp: print obj
FAIL: gdb.ada/tagged.exp: ptype obj
FAIL: gdb.ada/tagged_access.exp: ptype c.all
FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
FAIL: gdb.base/interrupt.exp: continue
FAIL: gdb.base/interrupt.exp: echo data
FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================

Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/1799>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m32/.git/tree/?h=master&id=451e591248cdbfeb013550ef57c7f612a50f9802>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/win_fu_syms.exp: compilation foo.adb
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one (the program exited)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.base/interrupt.exp: echo data (timeout)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.base/interrupt.exp: echo more data (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.trace/collection.exp: collect register locals collectively: collected local char
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: tfile: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/arraydim.exp: print m'first
FAIL: gdb.ada/arraydim.exp: print m'first(1)
FAIL: gdb.ada/arraydim.exp: print m'first(2)
FAIL: gdb.ada/arraydim.exp: print m'first(3)
FAIL: gdb.ada/arraydim.exp: print m'last
FAIL: gdb.ada/arraydim.exp: print m'last(1)
FAIL: gdb.ada/arraydim.exp: print m'last(2)
FAIL: gdb.ada/arraydim.exp: print m'last(3)
FAIL: gdb.ada/arraydim.exp: print m'length
FAIL: gdb.ada/arraydim.exp: print m'length(1)
FAIL: gdb.ada/arraydim.exp: print m'length(2)
FAIL: gdb.ada/arraydim.exp: print m'length(3)
FAIL: gdb.ada/arrayidx.exp: print e_one_two_three
FAIL: gdb.ada/arrayidx.exp: print e_one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print empty
FAIL: gdb.ada/arrayidx.exp: print empty, indexes off
FAIL: gdb.ada/arrayidx.exp: print few_reps
FAIL: gdb.ada/arrayidx.exp: print few_reps, indexes off
FAIL: gdb.ada/arrayidx.exp: print many_reps
FAIL: gdb.ada/arrayidx.exp: print many_reps, indexes off
FAIL: gdb.ada/arrayidx.exp: print one_two_three
FAIL: gdb.ada/arrayidx.exp: print one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print p_one_two_three
FAIL: gdb.ada/arrayidx.exp: print p_one_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print r_two_three
FAIL: gdb.ada/arrayidx.exp: print r_two_three, indexes off
FAIL: gdb.ada/arrayidx.exp: print u_one_two_three
FAIL: gdb.ada/arrayidx.exp: print u_one_two_three, indexes off
FAIL: gdb.ada/arrayparam.exp: print first after function call
FAIL: gdb.ada/arrayparam.exp: print last after function call
FAIL: gdb.ada/arrayparam.exp: print length after function call
FAIL: gdb.ada/bp_enum_homonym.exp: run to pck.archive breakpoint
FAIL: gdb.ada/bp_range_type.exp: print small_value
FAIL: gdb.ada/bp_range_type.exp: run to breakpoint
FAIL: gdb.ada/char_param.exp: call next
FAIL: gdb.ada/char_param.exp: print procedure_result after calling next
FAIL: gdb.ada/char_param.exp: print procedure_result after calling same
FAIL: gdb.ada/complete.exp: complete p external_ident
FAIL: gdb.ada/complete.exp: complete p some
FAIL: gdb.ada/complete.exp: interactive complete 'print some' (timeout)
FAIL: gdb.ada/cond_lang.exp: continue (the program is no longer running)
FAIL: gdb.ada/dyn_arrayidx.exp: ptype array_type
FAIL: gdb.ada/enum_idx_packed.exp: print full'first
FAIL: gdb.ada/expr_delims.exp: Check that watchpoint is set correctly.
FAIL: gdb.ada/expr_delims.exp: Print variable 'thread'
FAIL: gdb.ada/expr_delims.exp: Set conditional watchpoint.
FAIL: gdb.ada/expr_delims.exp: Set plain watchpoint on variable 'thread'
FAIL: gdb.ada/expr_delims.exp: continue (the program is no longer running)
FAIL: gdb.ada/exprs.exp: long_float'max
FAIL: gdb.ada/exprs.exp: long_float'min
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 10
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 20
FAIL: gdb.ada/fixed_cmp.exp: print My_Var > 20.0
FAIL: gdb.ada/fixed_points.exp: p on a new fixed point type
FAIL: gdb.ada/fixed_points.exp: p on a subtype fixed point type
FAIL: gdb.ada/fixed_points.exp: print Overprecise_Object
FAIL: gdb.ada/fixed_points.exp: ptype Overprecise_Object
FAIL: gdb.ada/float_param.exp: call set_double(1, 3.0)
FAIL: gdb.ada/float_param.exp: call set_long_double(1, global_small_struct, 4.0)
FAIL: gdb.ada/float_param.exp: print global_double
FAIL: gdb.ada/float_param.exp: print global_float
FAIL: gdb.ada/float_param.exp: print global_long_double
FAIL: gdb.ada/formatted_ref.exp: print s.x = 13
FAIL: gdb.ada/formatted_ref.exp: print/x s'access
FAIL: gdb.ada/homonym.exp: continue until BREAK_2 (the program is no longer running)
FAIL: gdb.ada/homonym.exp: print lcl at BREAK_1
FAIL: gdb.ada/homonym.exp: print lcl at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype int_type at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype lcl at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype lcl at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype local_type at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype local_type at BREAK_2
FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_1
FAIL: gdb.ada/homonym.exp: ptype local_type_subtype at BREAK_2
FAIL: gdb.ada/interface.exp: print s
FAIL: gdb.ada/iwide.exp: print d_access.all
FAIL: gdb.ada/iwide.exp: print dp_access.all
FAIL: gdb.ada/iwide.exp: print s_access.all
FAIL: gdb.ada/iwide.exp: print sp_access.all
FAIL: gdb.ada/lang_switch.exp: backtrace
FAIL: gdb.ada/lang_switch.exp: backtrace with lang set to C
FAIL: gdb.ada/mi_dyn_arr.exp: Create bt varobj
FAIL: gdb.ada/mi_dyn_arr.exp: run to foo.adb:22 (exec-continue) (MI error)
FAIL: gdb.ada/mi_dyn_arr.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions const.aint
FAIL: gdb.ada/mi_exc_info.exp: -info-ada-exceptions task
FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
FAIL: gdb.ada/mi_interface.exp: list ggg1's children
FAIL: gdb.ada/mi_interface.exp: run to foo.adb:22 (exec-continue) (MI error)
FAIL: gdb.ada/mi_interface.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.ada/mi_task_info.exp: -ada-task-info 3
FAIL: gdb.ada/null_array.exp: print my_matrix
FAIL: gdb.ada/null_array.exp: ptype my_table
FAIL: gdb.ada/operator_bp.exp: continue to "&" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "*" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "**" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "+" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "-" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "/" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "<" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "<=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ">" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ">=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "abs" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "and" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "mod" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "not" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "or" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "rem" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to "xor" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."&" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."*" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."**" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."+" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."-" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."/" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."<" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."<=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops.">" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops.">=" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."abs" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."and" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."mod" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."not" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."or" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."rem" (the program is no longer running)
FAIL: gdb.ada/operator_bp.exp: continue to ops."xor" (the program is no longer running)
FAIL: gdb.ada/packed_array.exp: print &var
FAIL: gdb.ada/packed_array.exp: print u_var
FAIL: gdb.ada/packed_array.exp: ptype &var
FAIL: gdb.ada/packed_tagged.exp: ptype x
FAIL: gdb.ada/pkd_arr_elem.exp: print test.str
FAIL: gdb.ada/pkd_arr_elem.exp: print test.str(1)
FAIL: gdb.ada/pp-rec-component.exp: print /r before
FAIL: gdb.ada/pp-rec-component.exp: print before
FAIL: gdb.ada/print_chars.exp: print WC
FAIL: gdb.ada/print_chars.exp: print WWC
FAIL: gdb.ada/py_range.exp: python print(int(gdb.parse_and_eval('ir')))
FAIL: gdb.ada/py_range.exp: python print(int(gdb.parse_and_eval('si')))
FAIL: gdb.ada/rdv_wait.exp: task 2
FAIL: gdb.ada/set_pckd_arr_elt.exp: continue to update_small (the program is no longer running)
FAIL: gdb.ada/tagged.exp: print obj
FAIL: gdb.ada/tagged.exp: print segm
FAIL: gdb.ada/tagged.exp: ptype obj
FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
FAIL: gdb.ada/task_bp.exp: run to dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:pck.dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.adb:pck.dummy_task - from psymtab
FAIL: gdb.ada/task_bp.exp: run to pck.dummy_task - from full symtab
FAIL: gdb.ada/task_bp.exp: run to pck.dummy_task - from psymtab
FAIL: gdb.ada/tasks.exp: break break_me task 1
FAIL: gdb.ada/tasks.exp: break break_me task 3
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print cold'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print prim'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: print vars'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype cold'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype full'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype prim'length
FAIL: gdb.ada/tick_length_array_enum_idx.exp: ptype vars'length
FAIL: gdb.ada/type_coercion.exp: p q
FAIL: gdb.ada/type_coercion.exp: print {Integer} $addr
FAIL: gdb.ada/type_coercion.exp: save q'address in convenience variable
FAIL: gdb.ada/type_coercion.exp: set {Integer} $addr := 19
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: continue to STOP2 (the program is no longer running)
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_Object.Ptr when null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when no longer null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when no longer null <<2>>
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object.Ptr when null
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_object after setting Ptr
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_object.ptr.all
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_p_object after setting Ptr
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print my_p_object.ptr.all
FAIL: gdb.ada/var_arr_attrs.exp: print my_object.data'last
FAIL: gdb.ada/var_arr_attrs.exp: print my_object.data'length
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'first
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'last
FAIL: gdb.ada/var_arr_attrs.exp: print my_small_object.data'length
FAIL: gdb.ada/variant_record_packed_array.exp: print address
FAIL: gdb.ada/variant_record_packed_array.exp: print adress content
FAIL: gdb.ada/watch_arg.exp: Continuing to second breakpoint (the program is no longer running)
FAIL: gdb.ada/unc_arr_ptr_in_var_rec.exp: print My_P_Object with null Ptr
FAIL: gdb.ada/mi_var_array.exp: Create bt varobj
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.ada/mi_var_array.exp: run to bar.adb:28 (exec-continue) (MI error)
FAIL: gdb.ada/mi_var_array.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5
FAIL: gdb.threads/print-threads.exp: all threads ran once (fast) (total 4 threads ran)
FAIL: gdb.threads/print-threads.exp: all threads ran once (slow with kill breakpoint) (total 4 threads ran)
FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2
FAIL: gdb.threads/print-threads.exp: all threads ran once
FAIL: gdb.threads/print-threads.exp: all threads ran once (slow) (total 4 threads ran)
FAIL: gdb.threads/watchthreads2.exp: all threads started
FAIL: gdb.threads/watchthreads2.exp: run to thread_started
============================

Failures on Fedora-x86_64-native-extended-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m64/builds/1819>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m64/.git/tree/?h=master&id=6afdad5bd003ba4357590a9b7e7d061c30e718f2>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one (the program exited)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=step: next over function call
============================

Failures on Fedora-x86_64-native-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/1794>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-gdbserver-m64/.git/tree/?h=master&id=e9e38dcbecd8eb8c0cf5d082193320b8cc054228>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/a2-run.exp: run "a2-run" with no args
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/a2-run.exp: run "a2-run" with no args
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.mi/mi-detach.exp: detach
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=step: next over function call
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
============================

Failures on Fedora-x86_64-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m64/builds/1806>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-m64/.git/tree/?h=master&id=7c3fdd8b16d8899117228db005605fe50a85ba2e>

*** Regressions found ***
============================
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: thread-specific breakpoint was deleted (timeout)
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: thread-specific breakpoint was deleted (timeout)
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/gdb-sigterm.exp: expect eof #0 (stepping inside range 201 times)
FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================

Failures on AIX-POWER7-plain, branch master

[sergiodj+buildbot]

Buildslave:
	aix-power7-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/AIX-POWER7-plain/builds/536>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/AIX-POWER7-plain/.git/tree/?h=master&id=998f852abef9dbbca6a44d006f76e76c966e71b7>

*** Regressions found ***
============================
new FAIL: gdb.base/huge.exp: print a very large data object (timeout)
new FAIL: gdb.threads/print-threads.exp: all threads ran once (fast) (total 4 threads ran)
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: signal command does not query, signal delivered
new FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: second signal: signal command queries
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: get my_number
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.base/attach.exp: starting with --pid
new FAIL: gdb.base/call-ar-st.exp: print print_double_array(double_array) (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_char_array(char_array) (timeout)
new FAIL: gdb.base/call-ar-st.exp: print sum_array_print(10, *list1, *list2, *list3, *list4) (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_small_structs (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_small_structs from print_long_arg_list (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_long_arg_list (timeout)
new FAIL: gdb.base/call-ar-st.exp: print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4) (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_struct_rep(*struct1, *struct2, *struct3) (timeout)
new FAIL: gdb.base/call-ar-st.exp: print print_one_large_struct(*list1) (timeout)
new FAIL: gdb.base/call-rt-st.exp: print print_one_double(*d1) <<2>>
new FAIL: gdb.base/catch-gdb-caused-signals.exp: continue (timeout)
new FAIL: gdb.base/completion.exp: tab complete break break.c:ma (timeout)
new FAIL: gdb.base/completion.exp: complete break break.c:ma
new FAIL: gdb.base/dprintf.exp: call: fprintf: 1st dprintf (timeout)
new FAIL: gdb.base/dprintf.exp: call: fprintf: 2nd dprintf (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: start (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: add inferior 3 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: inferior 3 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: attach to pid (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill inferiors 1 2 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: inferior 1 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: detach inferiors 3 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill inferiors 1 2 3 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: detach inferiors 1 2 3 (timeout)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill inferiors 10 (timeout)
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: print E2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: before start: c++: print S2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: before start: c++: print U2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype C
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c: print E2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: before start: c: print S2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: before start: c: print U2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype U2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: in main: c++: print E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: print S
new FAIL: gdb.cp/var-tag.exp: in main: c++: print U
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: print E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: print S2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: in main: c++: print U2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype C
new FAIL: gdb.cp/var-tag.exp: in main: c: print E
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c: print S
new FAIL: gdb.cp/var-tag.exp: in main: c: print U
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c: print E2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c: print S2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: in main: c: print U2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print S
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print U
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype C
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print E
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print S
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print U
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype U2
new FAIL: gdb.gdb/complaints.exp: call complaint (&symfile_complaints, "Register a complaint") (timeout)
new FAIL: gdb.gdb/complaints.exp: call complaint (&symfile_complaints, symfile_complaints->root->fmt) (timeout)
new FAIL: gdb.gdb/complaints.exp: call complaint (&symfile_complaints, "Testing! Testing! Testing!") (timeout)
new FAIL: gdb.gdb/complaints.exp: serial line 1 (timeout)
PASS -> FAIL: gdb.gdb/complaints.exp: empty non-verbose non-noisy clear
PASS -> FAIL: gdb.gdb/complaints.exp: empty verbose non-noisy clear
PASS -> FAIL: gdb.gdb/complaints.exp: empty verbose noisy clear
PASS -> FAIL: gdb.gdb/complaints.exp: empty non-verbose noisy clear
PASS -> FAIL: gdb.gdb/selftest.exp: backtrace through signal handler
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -function myclass::myfunction
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -source cpexplicit.cc -function myclass::myfunction -label top
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -function myclass::myfunction -label top (the program exited)
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -source cpexplicit.cc -function myclass::myfunction -label top -line 3
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -function myclass::myfunction -label top -line 3 (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -line 29 (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -function myclass::myfunction -label top
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -label top (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -line 3 (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -function myclass::myfunction -label top -line 3
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -label top -line 3 (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -line 3 (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::operator, (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function 'myclass::operator,' (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function "myclass::operator," (the program is no longer running)
new FAIL: gdb.linespec/cpexplicit.exp: dprintf -function myclass::operator,,"hello"
new FAIL: gdb.linespec/cpexplicit.exp: dprintf -function 'myclass::operator,',"hello"
new FAIL: gdb.linespec/cpexplicit.exp: dprintf -function "myclass::operator,","hello"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -source explicit.c -function myfunction -label top thread 123
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top -line 3
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top -line 3"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top -line 3 if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top -line 3" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top -line 3" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -source explicit.c -function myfunction -label top -line 3 thread 123
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -function myfunction -label top thread 123
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top -line 3
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top -line 3"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top -line 3 if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top -line 3" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top -line 3" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -function myfunction -label top -line 3 thread 123
new FAIL: gdb.linespec/explicit.exp: complete unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-existant function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete unique file name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique file name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-existant file name (GDB internal error)
new FAIL: gdb.mi/mi-dprintf.exp: fprintf: mi 1st dprintf (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: fprintf: mi 1st dprintf stop (unknown output after running)
new FAIL: gdb.mi/mi-dprintf.exp: fprintf: mi 2nd dprintf (timeout)
new FAIL: gdb.mi/mi-dprintf.exp: fprintf: mi 2nd dprintf stop (unknown output after running)
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: infcall in inferior 1
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: two dummy frames
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: after infcall: bt in inferior 1
new FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: finish in inferior 2 (the program is no longer running)
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: after infcall: bt in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: before infcall: bt in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: infcall in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: before infcall: bt in inferior 1
new FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: finish in inferior 2 (the program is no longer running)
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 1
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=on: Can't run to main
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: Can't run to main
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: Can't run to main
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: Can't run to main
PASS -> FAIL: gdb.threads/hand-call-new-thread.exp: iter 1: p new_thread ()
PASS -> FAIL: gdb.threads/kill.exp: threaded: all threads started
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 2
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 3
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 4
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 5
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 6
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 7
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 8
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 9
new FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 10
new FAIL: gdb.threads/non-ldr-exit.exp: set scheduler-locking on
new FAIL: gdb.threads/print-threads.exp: all threads ran once (fast) (total 4 threads ran)
new FAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: Can't run to main
new FAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: Can't run to main
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: signal command does not query, signal delivered
new FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: second signal: signal command queries
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: get my_number
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
PASS -> FAIL: gdb.threads/stepi-random-signal.exp: continue to breakpoint: after pthread_kill
new FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit (the program is no longer running)
============================

Failures on Fedora-x86_64-native-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m32/builds/1803>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-gdbserver-m32/.git/tree/?h=master&id=8d6cb1ed7db8cff6075d98713fed9fe31378a202>

*** Regressions found ***
============================
new FAIL: gdb.base/interrupt.exp: echo data (the program exited)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/win_fu_syms.exp: compilation foo.adb
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/interrupt.exp: echo data (the program exited)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
PASS -> FAIL: gdb.cp/virtbase.exp: print *this
PASS -> FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.mi/mi-detach.exp: detach
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder (pattern 1)
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.trace/collection.exp: collect register locals collectively: collected local char
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: tfile: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/interface.exp: print s
FAIL: gdb.ada/iwide.exp: print My_Drawable
FAIL: gdb.ada/iwide.exp: print d_access.all
FAIL: gdb.ada/iwide.exp: print dp_access.all
FAIL: gdb.ada/iwide.exp: print s_access.all
FAIL: gdb.ada/iwide.exp: print sp_access.all
FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
FAIL: gdb.ada/mi_interface.exp: list ggg1's children
FAIL: gdb.ada/ptype_tagged_param.exp: ptype s
FAIL: gdb.ada/str_uninit.exp: print my_str
FAIL: gdb.ada/tagged.exp: print obj
FAIL: gdb.ada/tagged.exp: ptype obj
FAIL: gdb.ada/tagged_access.exp: ptype c.all
FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: breakpoint on thread_function0's caller (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: delete 5 (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: let local watchpoint trigger (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: let thread_function0 return (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint automatically deleted (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint is still in breakpoint list (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint still triggers (timeout)
FAIL: gdb.threads/local-watch-wrong-thread.exp: the other thread stopped on breakpoint (timeout)
FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5
FAIL: gdb.threads/wp-replication.exp: Thread 5 hit breakpoint at thread_started
FAIL: gdb.threads/print-threads.exp: all threads ran once (fast) (total 4 threads ran)
FAIL: gdb.threads/wp-replication.exp: Thread 6 hit breakpoint at thread_started
FAIL: gdb.threads/wp-replication.exp: Thread 7 hit breakpoint at thread_started
FAIL: gdb.base/info-os.exp: get process groups
FAIL: gdb.threads/print-threads.exp: all threads ran once (slow with kill breakpoint) (total 4 threads ran)
FAIL: gdb.threads/wp-replication.exp: Thread 8 hit breakpoint at thread_started
FAIL: gdb.threads/wp-replication.exp: Thread 9 hit breakpoint at thread_started
FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 80 on watched_data (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: Thread 3 hit breakpoint at thread_started
FAIL: gdb.threads/wp-replication.exp: Thread 4 hit breakpoint at thread_started
FAIL: gdb.threads/wp-replication.exp: Thread 5 hit breakpoint at thread_started (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: Thread 6 hit breakpoint at thread_started (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: Thread 7 hit breakpoint at thread_started (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: Thread 8 hit breakpoint at thread_started (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: Thread 9 hit breakpoint at thread_started (the program is no longer running)
FAIL: gdb.threads/wp-replication.exp: set var test_ready=1
FAIL: gdb.threads/watchthreads2.exp: all threads started
FAIL: gdb.threads/watchthreads2.exp: run to thread_started
============================

Failures on Debian-s390x-m64, branch master

[sergiodj+buildbot]

Buildslave:
	debian-wheezy-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-m64/builds/505>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-s390x-m64/.git/tree/?h=master&id=ac98e1b03d74996f8797236ca0506aca3e2e5dde>

*** Regressions found ***
============================
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/s390-multiarch.exp: compile (31)
new FAIL: gdb.base/call-sc.exp: value foo returned; return call-sc-tld
new FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/dfp-test.exp: Correct _Decimal128 return value from called function.
new FAIL: gdb.base/gnu_vector.exp: finish shows vector return value
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/longjmp.exp: next over longjmp(1)
new FAIL: gdb.base/longjmp.exp: next over call_longjmp (2)
new FAIL: gdb.cp/annota2.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota2.exp: annotate-quit
new FAIL: gdb.cp/exceptprint.exp: string: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: reference to struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at throw <<2>>
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch <<2>>
new FAIL: gdb.cp/inherit.exp: print g_vD
new FAIL: gdb.cp/inherit.exp: print g_vE
new FAIL: gdb.cp/virtbase.exp: print *this
new FAIL: gdb.cp/virtbase.exp: print *(D *) e
new FAIL: gdb.dwarf2/dw2-anon-mptr.exp: ptype crash
new FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
new FAIL: gdb.dwarf2/member-ptr-forwardref.exp: ptype c
new FAIL: gdb.linespec/explicit.exp: complete unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-existant function name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete unique file name (timeout)
new FAIL: gdb.linespec/explicit.exp: complete non-unique file name (timeout)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.modula2/unbounded-array.exp: print unbounded array contents
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.python/py-value-cc.exp: u's second field via field
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test2 forced_stabs
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test forced_stabs
new FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end (timeout)
PASS -> FAIL: gdb.threads/watchthreads.exp: threaded watch loop
PASS -> FAIL: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
new FAIL: gdb.trace/tfile.exp: tfind 0 on trace file
============================

Failures on Fedora-ppc64be-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-m64/builds/1748>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-m64/.git/tree/?h=master&id=866fad10c3514fc803ff681a0ea76fce11b45385>

*** Regressions found ***
============================
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (timeout)
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/default.exp: info set (timeout)
new FAIL: gdb.base/default.exp: info symbol (timeout)
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
new FAIL: gdb.base/gnu_vector.exp: call add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: call add_various_floatvecs
new FAIL: gdb.base/gnu_vector.exp: finish shows vector return value
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
PASS -> FAIL: gdb.base/step-over-no-symbols.exp: displaced=auto: advanced
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.reverse/until-precsave.exp: run to end of main (timeout)
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (the program exited)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
FAIL: gdb.base/auxv.exp: continue (timeout)
FAIL: gdb.base/auxv.exp: info auxv on native core dump (timeout)
FAIL: gdb.base/auxv.exp: load core file for info auxv on gcore-created dump (timeout)
FAIL: gdb.base/auxv.exp: load core file for info auxv on native core dump (timeout)
FAIL: gdb.base/auxv.exp: matching auxv data from live and core
FAIL: gdb.base/auxv.exp: matching auxv data from live and gcore
============================

Failures on Fedora-ppc64be-native-extended-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-extended-gdbserver-m64/builds/1748>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-native-extended-gdbserver-m64/.git/tree/?h=master&id=56f59194ef88ce908c8bce8d1051e992d15eec69>

*** Regressions found ***
============================
new FAIL: gdb.base/auxv.exp: continue (timeout)
new FAIL: gdb.base/auxv.exp: load core file for info auxv on gcore-created dump (timeout)
new FAIL: gdb.base/auxv.exp: info auxv on gcore-created dump (timeout)
PASS -> FAIL: gdb.base/auxv.exp: matching auxv data from live and gcore
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2 (timeout)
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function (timeout)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (timeout)
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/annota1.exp: signal sent (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
PASS -> FAIL: gdb.base/auxv.exp: matching auxv data from live and gcore
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one (the program exited)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/exitsignal.exp: program terminated with SIGSEGV (timeout)
new FAIL: gdb.base/exitsignal.exp: $_exitsignal is 11 (SIGSEGV) after SIGSEGV. (timeout)
new FAIL: gdb.base/exitsignal.exp: $_exitcode is still void after SIGSEGV (timeout)
new FAIL: gdb.base/exitsignal.exp: (timeout) rerun to main
new FAIL: gdb.base/exitsignal.exp: $_exitsignal is 11 (SIGSEGV) after restarting the inferior (timeout)
new FAIL: gdb.base/gnu_vector.exp: call add_some_intvecs
new FAIL: gdb.base/gnu_vector.exp: call add_various_floatvecs
new FAIL: gdb.base/gnu_vector.exp: finish shows vector return value
new FAIL: gdb.base/gnu_vector.exp: verify vector return value (the program exited)
new FAIL: gdb.base/interrupt.exp: continue (the program exited)
new FAIL: gdb.base/interrupt.exp: echo data (timeout)
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT (the program is no longer running)
new FAIL: gdb.base/interrupt.exp: echo more data (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file (timeout)
new FAIL: gdb.base/interrupt.exp: send end of file
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2 (timeout)
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function (timeout)
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (unknown output after running)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (unknown output after running)
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: inferior 1 exited (timeout)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited (timeout)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (the program exited)
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (timeout)
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/func-ptrs.exp: stop in sentinel (timeout)
FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (timeout)
FAIL: gdb.reverse/until-precsave.exp: finish to main (timeout)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: set reverse execution (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (timeout)
FAIL: gdb.reverse/until-precsave.exp: advance to marker2
FAIL: gdb.reverse/until-precsave.exp: finish to main
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2 (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (the program is no longer running)
FAIL: gdb.reverse/until-precsave.exp: set reverse execution
FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame (got interactive prompt)
FAIL: gdb.base/annota3.exp: signal sent (pattern 4) (timeout)
FAIL: gdb.gdb/selftest.exp: backtrace through signal handler (timeout)
FAIL: gdb.gdb/selftest.exp: send SIGINT signal to child process (timeout)
FAIL: gdb.base/func-ptrs.exp: stop in sentinel
FAIL: gdb.reverse/until-precsave.exp: advance to marker2 (got interactive prompt)
FAIL: gdb.reverse/until-precsave.exp: reverse-advance to final return of factorial (timeout)
FAIL: gdb.reverse/until-precsave.exp: reverse-finish from marker2
FAIL: gdb.reverse/until-precsave.exp: reverse-until to entry of factorial (timeout)
FAIL: gdb.reverse/until-precsave.exp: until factorial, recursive function (timeout)
FAIL: gdb.reverse/until-precsave.exp: until func, not called by current frame
============================

Failures on Fedora-ppc64le-native-extended-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-native-extended-gdbserver-m64/builds/1676>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-native-extended-gdbserver-m64/.git/tree/?h=master&id=0a40a9409c29d0692d960941f2a105561c1f6370>

*** Regressions found ***
============================
new FAIL: gdb.base/checkpoint-ns.exp: break1 four (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<7>>
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/annota1.exp: signal sent (timeout)
PASS -> FAIL: gdb.base/attach.exp: attach1, after setting file
new FAIL: gdb.base/attach.exp: attach1 detach (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach2, with no file
PASS -> FAIL: gdb.base/attach.exp: after attach2, set should_exit
new FAIL: gdb.base/attach.exp: continue to breakpoint: postloop (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit at after attach2, exit (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
new FAIL: gdb.base/attach.exp: continue until exit (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: starting with --pid
PASS -> FAIL: gdb.base/attach.exp: cmdline attach run: run to prompt
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: info shared
new FAIL: gdb.base/break.exp: run until breakpoint set at small function, optimized file (the program exited)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
new FAIL: gdb.base/checkpoint.exp: break1 five (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout)
new FAIL: gdb.base/checkpoint.exp: break1 six (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: break1 seven (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<3>>
new FAIL: gdb.base/checkpoint.exp: break1 eight (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<4>>
new FAIL: gdb.base/checkpoint.exp: break1 nine (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<5>>
new FAIL: gdb.base/checkpoint.exp: break1 ten (timeout)
new FAIL: gdb.base/checkpoint.exp: checkpoint (timeout) <<6>>
new FAIL: gdb.base/checkpoint.exp: info checkpoints one (timeout)
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify i 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 0 one (timeout)
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 57 (timeout)
new FAIL: gdb.base/checkpoint.exp: break3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: Diff input and output one (timeout)
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 49 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 1 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout)
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 1 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 1 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 2 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 2 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 2 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 3 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<3>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 3 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 3 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 4 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<4>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 4 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 4 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 5 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<5>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 5 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 6 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<6>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 6 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: restart 7 two (timeout)
new FAIL: gdb.base/checkpoint.exp: continue (timeout) <<7>>
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: step in 7 two (timeout)
new FAIL: gdb.base/checkpoint.exp: verify lines 7 two (timeout)
new FAIL: gdb.base/checkpoint.exp: Diff input and output two (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 0 one (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 59 (timeout)
new FAIL: gdb.base/checkpoint.exp: break4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: delete copy1 (timeout)
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints (timeout) <<2>>
new FAIL: gdb.base/checkpoint.exp: restart 1 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 1 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 1 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 2 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 2 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 2 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 3 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 3 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 3 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 4 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 4 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 4 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 5 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 5 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 5 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 6 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 6 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 6 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 7 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 7 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 7 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 8 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 8 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 8 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 9 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 9 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 9 (timeout)
new FAIL: gdb.base/checkpoint.exp: restart 10 three (timeout)
new FAIL: gdb.base/checkpoint.exp: break2 10 one (timeout)
new FAIL: gdb.base/checkpoint.exp: outfile still open 10 (timeout)
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints (timeout) <<3>>
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork two (timeout)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork three (timeout)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork four (timeout)
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork five (timeout)
new FAIL: gdb.base/checkpoint.exp: info checkpoints two (timeout)
new FAIL: gdb.base/checkpoint.exp: kill all one (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 0 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 1 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 2 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 3 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 4 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 5 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 6 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 7 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 8 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 9 (timeout)
new FAIL: gdb.base/checkpoint.exp: no more checkpoint 10 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break1 four (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break1 five (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break1 six (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<3>>
new FAIL: gdb.base/checkpoint-ns.exp: break1 seven (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<4>>
new FAIL: gdb.base/checkpoint-ns.exp: break1 eight (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<5>>
new FAIL: gdb.base/checkpoint-ns.exp: break1 nine (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<6>>
new FAIL: gdb.base/checkpoint-ns.exp: break1 ten (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint (timeout) <<7>>
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 57 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 49 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<3>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<4>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<5>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<6>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two (timeout) <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: continue (timeout) <<7>>
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one (timeout) <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 59 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: delete copy1 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: delete all breakpoints in delete_breakpoints (timeout) <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: delete all breakpoints in delete_breakpoints (timeout) <<3>>
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: kill all one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 0 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 1 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 2 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 3 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 4 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 5 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 6 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 7 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 8 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 9 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 10 (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/exitsignal.exp: program terminated with SIGSEGV (timeout)
new FAIL: gdb.base/exitsignal.exp: $_exitsignal is 11 (SIGSEGV) after SIGSEGV. (timeout)
new FAIL: gdb.base/exitsignal.exp: $_exitcode is still void after SIGSEGV (timeout)
new FAIL: gdb.base/exitsignal.exp: (timeout) rerun to main
new FAIL: gdb.base/exitsignal.exp: $_exitsignal is 11 (SIGSEGV) after restarting the inferior (timeout)
new FAIL: gdb.base/interrupt.exp: child died when we called func1, skipped rest of tests
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill inferiors 1 2
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: detach inferiors 3
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors(execute_command, "python print(5)", 0)
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop (unknown output after running)
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent (unknown output after running)
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent (timeout)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
PASS -> FAIL: gdb.multi/multi-attach.exp: add second inferior
PASS -> FAIL: gdb.multi/multi-attach.exp: switch to second inferior
PASS -> FAIL: gdb.multi/multi-attach.exp: attach to program 2
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.python/py-sync-interp.exp: attach and where
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 1
new FAIL: gdb.server/ext-attach.exp: detach (the program is no longer running)
PASS -> FAIL: gdb.server/ext-attach.exp: attach to remote program 2
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 2
PASS -> FAIL: gdb.server/ext-attach.exp: monitor exit
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 3: attach (pass 1), pending signal catch
PASS -> FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attach (pass 1), pending signal catch
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 1: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 2: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 3: attach (pass 1), pending signal catch
PASS -> FAIL: gdb.threads/attach-into-signal.exp: threaded: attach (pass 1), pending signal catch
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-stopped.exp: nonthreaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/attach-stopped.exp: threaded: attach2 to stopped bt
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: inferior 1 exited (timeout)
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 4
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
FAIL: gdb.threads/fork-thread-pending.exp: 1, get to the fork event (timeout)
FAIL: gdb.threads/fork-thread-pending.exp: 1, multiple threads found (the program exited)
============================

Failures on Fedora-ppc64le-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-m64/builds/1666>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-m64/.git/tree/?h=master&id=efe2025e0018409b5c550db6fed03a31ab31e843>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/checkpoint-ns.exp: step in 5 two
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/altivec-abi.exp: generic ABI, forced: step into vec_fun
PASS -> FAIL: gdb.base/attach.exp: attach1, after setting file
new FAIL: gdb.base/attach.exp: attach1 detach (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach2, with no file
PASS -> FAIL: gdb.base/attach.exp: after attach2, set should_exit
new FAIL: gdb.base/attach.exp: continue to breakpoint: postloop (the program is no longer running)
new FAIL: gdb.base/attach.exp: continue until exit at after attach2, exit (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: attach when process' a.out not in cwd
new FAIL: gdb.base/attach.exp: continue until exit (the program is no longer running)
PASS -> FAIL: gdb.base/attach.exp: starting with --pid
PASS -> FAIL: gdb.base/attach.exp: cmdline attach run: run to prompt
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: attach
PASS -> FAIL: gdb.base/attach-pie-noexec.exp: info shared
PASS -> FAIL: gdb.base/attach-twice.exp: attach
new FAIL: gdb.base/break.exp: run until breakpoint set at small function, optimized file (the program exited)
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieNO: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieYES: attach: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (timeout)
PASS -> FAIL: gdb.base/checkpoint-ns.exp: step in 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
PASS -> FAIL: gdb.base/commands.exp: continue with watch
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/default.exp: info set (timeout)
new FAIL: gdb.base/default.exp: info symbol (timeout)
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=on ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=gdb dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=call dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=on: re-attach to inferior
PASS -> FAIL: gdb.base/dprintf-detach.exp: bai=off ds=agent dd=off: re-attach to inferior
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: detach inferiors 3
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors(execute_command, "python print(5)", 0)
PASS -> FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 1
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-bt.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-bt.exp: backtrace from bar (3)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (1)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-cmds.exp: continue to marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: backtrace from marker
PASS -> FAIL: gdb.opt/inline-cmds.exp: step into finish marker
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (1)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (2)
PASS -> FAIL: gdb.opt/inline-locals.exp: continue to bar (3)
PASS -> FAIL: gdb.opt/inline-locals.exp: backtrace from bar (3)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.python/py-sync-interp.exp: attach and where
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 1
new FAIL: gdb.server/ext-attach.exp: detach (the program is no longer running)
PASS -> FAIL: gdb.server/ext-attach.exp: attach to remote program 2
PASS -> FAIL: gdb.server/ext-attach.exp: backtrace 2
PASS -> FAIL: gdb.server/ext-attach.exp: monitor exit
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 3: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 4: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 5: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 6: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 7: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 8: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 9: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 10: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 11: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 12: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 13: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 14: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 15: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 16: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 17: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 18: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 19: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 20: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 21: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 22: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 23: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 24: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 25: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 26: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 27: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 28: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 29: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 30: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 31: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 32: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 33: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 34: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 35: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 36: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 37: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 38: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 39: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 40: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 41: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 42: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 43: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 44: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 45: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 46: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 47: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 48: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 49: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 50: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 51: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 52: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 53: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 54: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 55: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 56: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 57: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 58: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 59: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 60: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 61: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 62: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 63: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 64: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 65: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 66: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 67: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 68: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 69: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 70: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 71: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 72: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 73: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 74: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 75: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 76: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 77: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 78: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 79: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 80: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 81: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 82: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 83: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 84: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 85: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 86: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 87: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 88: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 89: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 90: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 91: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 92: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 93: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 94: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 95: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 96: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 97: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 98: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 99: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: nonthreaded: attempt 100: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 1: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 2: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 3: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 3: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 4: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 4: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 5: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 5: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 6: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 6: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 7: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 7: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 8: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 8: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 9: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 9: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 10: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 10: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 11: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 11: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 12: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 12: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 13: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 13: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 14: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 14: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 15: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 15: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 16: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 16: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 17: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 17: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 18: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 18: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 19: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 19: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 20: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 20: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 21: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 21: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 22: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 22: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 23: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 23: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 24: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 24: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 25: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 25: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 26: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 26: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 27: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 27: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 28: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 28: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 29: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 29: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 30: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 30: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 31: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 31: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 32: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 32: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 33: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 33: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 34: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 34: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 35: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 35: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 36: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 36: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 37: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 37: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 38: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 38: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 39: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 39: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 40: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 40: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 41: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 41: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 42: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 42: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 43: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 43: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 44: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 44: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 45: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 45: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 46: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 46: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 47: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 47: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 48: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 48: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 49: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 49: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 50: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 50: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 51: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 51: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 52: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 52: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 53: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 53: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 54: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 54: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 55: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 55: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 56: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 56: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 57: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 57: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 58: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 58: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 59: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 59: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 60: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 60: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 61: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 61: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 62: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 62: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 63: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 63: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 64: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 64: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 65: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 65: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 66: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 66: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 67: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 67: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 68: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 68: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 69: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 69: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 70: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 70: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 71: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 71: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 72: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 72: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 73: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 73: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 74: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 74: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 75: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 75: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 76: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 76: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 77: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 77: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 78: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 78: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 79: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 79: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 80: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 80: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 81: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 81: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 82: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 82: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 83: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 83: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 84: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 84: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 85: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 85: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 86: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 86: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 87: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 87: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 88: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 88: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 89: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 89: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 90: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 90: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 91: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 91: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 92: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 92: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 93: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 93: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 94: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 94: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 95: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 95: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 96: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 96: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 97: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 97: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 98: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 98: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 99: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 99: detach (the program is no longer running)
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 100: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 100: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (the program is no longer running)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (the program is no longer running)
PASS -> FAIL: gdb.threads/attach-stopped.exp: nonthreaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/attach-stopped.exp: threaded: attach2 to stopped bt
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (the program exited)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================


*** Failures that are being ignored ***
============================
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/1724>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7cd87023400bec97f185ea5370a2f31a159dc263>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
new FAIL: gdb.base/dprintf.exp: (the program exited)
new FAIL: gdb.base/dprintf.exp: 1st dprintf, gdb (the program is no longer running)
new FAIL: gdb.base/dprintf.exp: 2nd dprintf, gdb (the program is no longer running)
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686-native-gdbserver, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686-native-gdbserver/builds/1712>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-gdbserver/.git/tree/?h=master&id=f793f6e1df5de8b3eea6ca952139a2d754cfff19>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
PASS -> FAIL: gdb.base/gnu-ifunc.exp: step
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
new FAIL: gdb.mi/mi-detach.exp: detach
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
============================

Failures on Debian-i686-native-extended-gdbserver, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686-native-extended-gdbserver/builds/1710>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-extended-gdbserver/.git/tree/?h=master&id=a2c1f02956e1bdf8d8d10eb51ac9091d831c49de>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n(1)
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0 ()
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1 (1)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2 (1, 2)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3 (1, 2, 3)
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4 (1, 2, 3, 4)
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell (timeout)
new FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one <<2>>
new FAIL: gdb.base/checkpoint-ns.exp: break4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five (the program is no longer running)
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
PASS -> FAIL: gdb.base/gnu-ifunc.exp: step
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
new FAIL: gdb.threads/execl.exp: continue until exit (the program exited)
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/dyn_arrayidx.exp: ptype array_type
FAIL: gdb.ada/mi_var_array.exp: Create bt varobj
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.ada/mi_var_array.exp: run to bar.adb:28 (exec-continue) (MI error)
FAIL: gdb.ada/mi_var_array.exp: wait for stop (stop at start of main Ada procedure)
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=step: next over function call
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
============================

Failures on Debian-x86_64-m64, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-x86_64

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-x86_64-m64/builds/1724>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<Error fetching commit ID for 948578a989f8c666c9b0e92c9a50906724921f14>

Failures on Debian-x86_64-native-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-x86_64

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-x86_64-native-gdbserver-m64/builds/1737>

Commit(s) tested:
	948578a989f8c666c9b0e92c9a50906724921f14

Author(s) (in the same order as the commits):
	Patrick Palka <patrick@parcs.ath.cx>

Subject:
	tui: don't overwrite a secondary prompt that was given no input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-x86_64-native-gdbserver-m64/.git/tree/?h=master&id=24c586110fbe758586b6ed5ad514c36e6c16c0b1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
new FAIL: gdb.mi/mi-detach.exp: detach
PASS -> FAIL: gdb.python/py-lookup-type.exp: lookup type ucent using language d
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.dwarf2/gdb-index.exp: touch binary
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=off: next over function call
FAIL: gdb.base/random-signal.exp: stop with control-c (timeout)
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4879>

Commit(s) tested:
	4586d54305ed275bb909f3373a7372c02d7e579e

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in pyuw_object_attribute_to_pointer

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/45/4586d54305ed275bb909f3373a7372c02d7e579e/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4878>

Commit(s) tested:
	59876f8f9f32081b2831aed83a03a815e8d85a97

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in python.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/59/59876f8f9f32081b2831aed83a03a815e8d85a97/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4877>

Commit(s) tested:
	97d83487d5fbffd04d68a049f97009e1df2562a3

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in py-param.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/97/97d83487d5fbffd04d68a049f97009e1df2562a3/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4876>

Commit(s) tested:
	9205649a38c609a42ba52680a316fceaa08c1543

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in py-inferior.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/92/9205649a38c609a42ba52680a316fceaa08c1543/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4875>

Commit(s) tested:
	74c49d454b81c84fcffbc090466e241bdefd2f3a

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in py_print_frame

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/74/74c49d454b81c84fcffbc090466e241bdefd2f3a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4873>

Commit(s) tested:
	905f2ccab1b7070c7953e9f12de638e2dc147a9a

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in py-cmd.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/90/905f2ccab1b7070c7953e9f12de638e2dc147a9a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4872>

Commit(s) tested:
	64081434cce13f38288d82d3d31b6199e9deff4a

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in gdbpy_breakpoint_cond_says_stop

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/64/64081434cce13f38288d82d3d31b6199e9deff4a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4871>

Commit(s) tested:
	59e9e83119a528f17afea89ee22195a95322c6d6

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in archpy_disassemble

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/59/59e9e83119a528f17afea89ee22195a95322c6d6/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4870>

Commit(s) tested:
	9de10f6d53dffbec12cec9843662d5764526983d

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Change python_run_simple_file to use gdbpy_ref

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/9d/9de10f6d53dffbec12cec9843662d5764526983d/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4869>

Commit(s) tested:
	2bd5759dcb71adfb26b1c7cf20b3b032af29b845

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in py-prettyprint.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/2b/2bd5759dcb71adfb26b1c7cf20b3b032af29b845/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4868>

Commit(s) tested:
	3b4e0e01f8b19269d720948ee2350cb753f8ede4

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in py_print_frame

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/3b/3b4e0e01f8b19269d720948ee2350cb753f8ede4/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4866>

Commit(s) tested:
	68cdc55720bbe34d9d844ef2a0c4d75fcab4bc99

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter_varobj in varobj_value_get_print_value

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/68/68cdc55720bbe34d9d844ef2a0c4d75fcab4bc99/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4865>

Commit(s) tested:
	1eba63835ea23cbae6059c076db985a47e39ce24

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Change type of encoding argument to gdbpy_extract_lazy_string

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/1e/1eba63835ea23cbae6059c076db985a47e39ce24/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4864>

Commit(s) tested:
	bde7b3e3a0d5e1f0b66730d692b21c98a8686f75

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter_varobj in more of varobj.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/bd/bde7b3e3a0d5e1f0b66730d692b21c98a8686f75/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4863>

Commit(s) tested:
	a7785f8c797183eb363e95c201343df67d8536c6

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in python.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/a7/a7785f8c797183eb363e95c201343df67d8536c6/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4862>

Commit(s) tested:
	2865bfce3875fa16046b0a987d98ab19fc8bbb9a

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in py-param.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/28/2865bfce3875fa16046b0a987d98ab19fc8bbb9a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4861>

Commit(s) tested:
	0e9dcc758786feaaaf5026c6e59af42b30a35d36

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in fnpy_call

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/0e/0e9dcc758786feaaaf5026c6e59af42b30a35d36/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4860>

Commit(s) tested:
	12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in cmdpy_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/12/12a5cedd4f2c5b1f4e303efda6f8ac3e06eec944/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4859>

Commit(s) tested:
	788f258604773ccbe9ccba71f9b1725930324275

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter_varobj in py-varobj.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/78/788f258604773ccbe9ccba71f9b1725930324275/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4858>

Commit(s) tested:
	6cd67beaae58c9e870b79feea3cf74ffdf7a9b33

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Introduce gdbpy_enter_varobj and use it

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/6c/6cd67beaae58c9e870b79feea3cf74ffdf7a9b33/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4857>

Commit(s) tested:
	14b122bf1ce59f5f1b82f6e2a347f4ad89801f45

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in py-xmethod.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/14/14b122bf1ce59f5f1b82f6e2a347f4ad89801f45/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4856>

Commit(s) tested:
	bf1ca3b9476185fb6e301d85e646f5d2af95e257

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in invoke_match_method

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/bf/bf1ca3b9476185fb6e301d85e646f5d2af95e257/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4855>

Commit(s) tested:
	572a5524c1eb50d8064a44108fd0ef22a0e63bf8

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in gdbpy_get_matching_xmethod_workers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/57/572a5524c1eb50d8064a44108fd0ef22a0e63bf8/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4854>

Commit(s) tested:
	396a78b6271c45410fc22c4bc7f8cff75da3d153

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in python_interactive_command

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/39/396a78b6271c45410fc22c4bc7f8cff75da3d153/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4850>

Commit(s) tested:
	c0171de646ddd85bac9d4bb1ebdf601f7ba7eeab

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in py-unwind.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c0/c0171de646ddd85bac9d4bb1ebdf601f7ba7eeab/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4849>

Commit(s) tested:
	f18e226ff84f7fba9ce7197ed7a2969eba231b4d

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in py-xmethods.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/f1/f18e226ff84f7fba9ce7197ed7a2969eba231b4d/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4848>

Commit(s) tested:
	c57af3f12b91ca49adc2e06056f794cb09514897

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in py-type.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c5/c57af3f12b91ca49adc2e06056f794cb09514897/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4847>

Commit(s) tested:
	60e600ec691255536ae53e365d0410ecf79bdea2

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in python.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/60/60e600ec691255536ae53e365d0410ecf79bdea2/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4845>

Commit(s) tested:
	2d38bcedc2f91692857d257e106dafc9269d8f1a

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in py-objfile.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/2d/2d38bcedc2f91692857d257e106dafc9269d8f1a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4843>

Commit(s) tested:
	6e7c365ee0ea2551f9f840b71081fdf759088b5e

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in py-finishbreakpoint.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/6e/6e7c365ee0ea2551f9f840b71081fdf759088b5e/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4842>

Commit(s) tested:
	6ba0cd406511d3edbe643f5e599d79538febedc5

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_enter in py-cmd.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/6b/6ba0cd406511d3edbe643f5e599d79538febedc5/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4839>

Commit(s) tested:
	4ecee2c47da3e91c0571683acb5cfb8400402663

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Introduce gdbpy_enter

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/4e/4ecee2c47da3e91c0571683acb5cfb8400402663/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4838>

Commit(s) tested:
	37fce74fb42f45ec340962170a4b297beede733a

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in gdbpy_lookup_symbol

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/37/37fce74fb42f45ec340962170a4b297beede733a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4837>

Commit(s) tested:
	53a0cca3bd0f6ae80b2d6fc34b2873046965c7f0

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in py-value.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/53/53a0cca3bd0f6ae80b2d6fc34b2873046965c7f0/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4834>

Commit(s) tested:
	1bb44c9f567c75355c1b4417d88cda959e82a3a3

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in call_doc_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/1b/1bb44c9f567c75355c1b4417d88cda959e82a3a3/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4832>

Commit(s) tested:
	ee0a3fb85b33b172f704796612c4487ea368d675

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in py-framefilter.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ee/ee0a3fb85b33b172f704796612c4487ea368d675/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4831>

Commit(s) tested:
	bf2a52fa2ac2c4486653993a765fd922b3cd64a6

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in gdbpy_breakpoints

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/bf/bf2a52fa2ac2c4486653993a765fd922b3cd64a6/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4828>

Commit(s) tested:
	d1b3de2e43380a0c51772a40315cd2268573d985

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdbpy_ref in gdbpy_string_to_argv

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/d1/d1b3de2e43380a0c51772a40315cd2268573d985/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4826>

Commit(s) tested:
	abf5651e47c0396df58a37951bc03a349169c5f2

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Change event code to use gdbpy_ref

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ab/abf5651e47c0396df58a37951bc03a349169c5f2/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4825>

Commit(s) tested:
	a68ff33e0dcb4733584265088030d12a31e740e4

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Introduce py-ref.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/a6/a68ff33e0dcb4733584265088030d12a31e740e4/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4823>

Commit(s) tested:
	fff53daefb7838b5718422c87946330e4a8288ce

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	i386/x86-64: Add unwind info for .plt.got section

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ff/fff53daefb7838b5718422c87946330e4a8288ce/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4822>

Commit(s) tested:
	f129e49f4d07f4d36319ac757fdcf3a8ce7d605b

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Don't use elf_i386_eh_frame_plt directly

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/f1/f129e49f4d07f4d36319ac757fdcf3a8ce7d605b/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4821>

Commit(s) tested:
	7becfd03bad526c02216eeb5ec2bebae694b1af1

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Change return type of ui_out redirect to void

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/7b/7becfd03bad526c02216eeb5ec2bebae694b1af1/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4820>

Commit(s) tested:
	df2946549f60624503663cc6c28cd5a6ef0ab434

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Update help of the "frame" command

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/df/df2946549f60624503663cc6c28cd5a6ef0ab434/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4819>

Commit(s) tested:
	a4fb5981b7ec3d4006e93141afb1d0da566bb97b

Author(s) (in the same order as the commits):
	Jim Wilson <jim.wilson@linaro.org>

Subject:
	Fix problems with the implementation of the uzp1 and uzp2 instructions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/a4/a4fb5981b7ec3d4006e93141afb1d0da566bb97b/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4817>

Commit(s) tested:
	cd6581da62c32a391f9a4c2c5d248a11aa6fa8f7

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Speed up objdump when displaying disassembly mixed with line number and source code information.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/cd/cd6581da62c32a391f9a4c2c5d248a11aa6fa8f7/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4815>

Commit(s) tested:
	f5e6296e2194add209b546ad49039753a10242f5

Author(s) (in the same order as the commits):
	Iain Buclaw <ibuclaw@gdcproject.org>

Subject:
	[D] Fix crash when debug expression enabled.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/f5/f5e6296e2194add209b546ad49039753a10242f5/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4812>

Commit(s) tested:
	0e2d6fa6a38ae2b80a56d786a41d905c9541906f

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Include gdb_proc_service.h in x86-linux-nat.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/0e/0e2d6fa6a38ae2b80a56d786a41d905c9541906f/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4811>

Commit(s) tested:
	44d6d3f93341387bd2c95ea4c941bf99127e7389

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Include serial.h in ser-base.h.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/44/44d6d3f93341387bd2c95ea4c941bf99127e7389/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4808>

Commit(s) tested:
	1ca8f924a46c620c7a7ddbd156c3a623a5a6d1fb

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Include signal.h in nat/amd64-linux-siginfo.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/1c/1ca8f924a46c620c7a7ddbd156c3a623a5a6d1fb/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4807>

Commit(s) tested:
	bc3008c48f17aa67d39e539737a999737cd697a7

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Include break-common.h in nat/aarch64-linux-hw-point.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/bc/bc3008c48f17aa67d39e539737a999737cd697a7/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4806>

Commit(s) tested:
	66c80d03078b71470c66b8f00cab82d89daeea08

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Include mi-cmds.h in mi-parse.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/66/66c80d03078b71470c66b8f00cab82d89daeea08/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4805>

Commit(s) tested:
	051d2ddae5a2289d1f253b563e57a8e8496a06bb

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Include target.h in inf-loop.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/05/051d2ddae5a2289d1f253b563e57a8e8496a06bb/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4804>

Commit(s) tested:
	8018d34f1e5d94ffe1f12ac2455429c6f713c518

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Include doublest.h and expression.h in dfp.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/80/8018d34f1e5d94ffe1f12ac2455429c6f713c518/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4803>

Commit(s) tested:
	c0b8369c8aa4e05bf8f1b2ce4a79133cf1192a16

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Include ax.h in ax-gdb.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c0/c0b8369c8aa4e05bf8f1b2ce4a79133cf1192a16/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4802>

Commit(s) tested:
	ad5cba2adbdb8ec216d44515468bde8d96892c3d

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Update gdb_ptrace.h in HFILES_NO_SRCDIR

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ad/ad5cba2adbdb8ec216d44515468bde8d96892c3d/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4800>

Commit(s) tested:
	0ae60c3ef45d41b34d40ed5c7b4fdfea289530de

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Prevent an abort in the FRV disassembler if the target bfd name is unknown.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/0a/0ae60c3ef45d41b34d40ed5c7b4fdfea289530de/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
new FAIL: gdb.base/valgrind-db-attach.exp: attach to debugger
PASS -> FAIL: gdb.base/valgrind-db-attach.exp: eat first prompt
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4799>

Commit(s) tested:
	c0386d4d54d2cc33d6efc0b998fe6396bf92be15

Author(s) (in the same order as the commits):
	Jim Wilson <jim.wilson@linaro.org>

Subject:
	Five fixes, for fcsel, fcvtz, fminnm, mls, and non-widening mul.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c0/c0386d4d54d2cc33d6efc0b998fe6396bf92be15/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4798>

Commit(s) tested:
	c988ac1de5bc0efec2022fc6ce7d13b24e540099

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Use correct OSABI constant for FreeBSD/mips binaries.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c9/c988ac1de5bc0efec2022fc6ce7d13b24e540099/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4795>

Commit(s) tested:
	8cf50cb070642d73acc537010d71c912f921861c

Author(s) (in the same order as the commits):
	Jiong Wang <jiong.wang@arm.com>

Subject:
	[DWARF] Sync GCC dwarf.def change on AArch64

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/8c/8cf50cb070642d73acc537010d71c912f921861c/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4794>

Commit(s) tested:
	7c2a23b23e9ca7015acadbbc7a12c665791c8337

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	update-copyright.py for binutils

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/7c/7c2a23b23e9ca7015acadbbc7a12c665791c8337/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4793>

Commit(s) tested:
	e495212d229d58eb4d70c94d7f828a04c386c3b2

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Sync libiberty from gcc

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/e4/e495212d229d58eb4d70c94d7f828a04c386c3b2/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4791>

Commit(s) tested:
	d74d4880e23263bac3690bcb641af56bd13036e6

Author(s) (in the same order as the commits):
	Szabolcs Nagy <szabolcs.nagy@arm.com>

Subject:
	[AArch64] Add separate feature flag for weaker release consistent load insns

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/d7/d74d4880e23263bac3690bcb641af56bd13036e6/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4790>

Commit(s) tested:
	2aaaf250e80afb4a5c66fb0b7801e24cc5c4e680

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Fix an internal error on writing pieced value

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/2a/2aaaf250e80afb4a5c66fb0b7801e24cc5c4e680/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4789>

Commit(s) tested:
	ae4fda663812129df67e3a70691787060242c0f9

Author(s) (in the same order as the commits):
	James Clarke <jrtc27@jrtc27.com>

Subject:
	bfd: alpha: Fix crash caused by double free with --no-keep-memory

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ae/ae4fda663812129df67e3a70691787060242c0f9/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4788>

Commit(s) tested:
	cc917fd93d2a836adfd61b91df021cf835e88fd1

Author(s) (in the same order as the commits):
	Kito Cheng <kito.cheng@gmail.com>

Subject:
	Add support for the Q extension to the RISCV ISA.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/cc/cc917fd93d2a836adfd61b91df021cf835e88fd1/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4787>

Commit(s) tested:
	de1010f40884537cf0905ad134162cd2db71dc2a

Author(s) (in the same order as the commits):
	Rich Felker <bugdal@aerifal.cx>

Subject:
	Fix generation of GOT table when only GOT-relative relocs are used.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/de/de1010f40884537cf0905ad134162cd2db71dc2a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4786>

Commit(s) tested:
	b52d3cfcfb472263eca181da37dfc0377978acba

Author(s) (in the same order as the commits):
	Dilyan Palauzov <dilyan.palauzov@aegee.org>

Subject:
	Add fall through comment.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/b5/b52d3cfcfb472263eca181da37dfc0377978acba/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4784>

Commit(s) tested:
	09fe2662a708aa4da665bcaf942b5529e6809220

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix compile time warning about using a possibly uninitialised variable.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/09/09fe2662a708aa4da665bcaf942b5529e6809220/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4783>

Commit(s) tested:
	fb9b4b7e534c4df7e8e0cb60c180e61f27617f0a

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Sync dwarf headers with master versions in gcc repository.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/fb/fb9b4b7e534c4df7e8e0cb60c180e61f27617f0a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4781>

Commit(s) tested:
	595e0a47f57b414843261303b8aa5036fd1fa1e3

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Don't make symbols dynamic other than undef weak

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/59/595e0a47f57b414843261303b8aa5036fd1fa1e3/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4779>

Commit(s) tested:
	5b86074c4a84e32ca55a6c72c5fca45d97dc9374

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	PR20989, sparc GOT sequence optimisation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/5b/5b86074c4a84e32ca55a6c72c5fca45d97dc9374/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4773>

Commit(s) tested:
	ae4c0df4b6a76db172cc4d4c3f34fdd8064c80ed

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Fix riscv breakage

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ae/ae4c0df4b6a76db172cc4d4c3f34fdd8064c80ed/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=aab812c>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=aab812c>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4770>

Commit(s) tested:
	889294f6ffb380eb37b1f1f3bd22807fa9204c14

Author(s) (in the same order as the commits):
	Dimitar Dimitrov <dimitar@dinux.eu>

Subject:
	PRU BFD support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/88/889294f6ffb380eb37b1f1f3bd22807fa9204c14/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=aab812c>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=aab812c>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4769>

Commit(s) tested:
	3f66c01be30edcfaedd11d475078f78e464ca4a0

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Import config.sub

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/3f/3f66c01be30edcfaedd11d475078f78e464ca4a0/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=aab812c>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=aab812c>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4768>

Commit(s) tested:
	0a7e10188e3c08403fb00b728644d7a95092c732

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Return 'int' rather than 'unsigned short' in avrdis_opcode

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/0a/0a7e10188e3c08403fb00b728644d7a95092c732/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=aab812c>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=aab812c>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4767>

Commit(s) tested:
	e81830c5c61a8665c098189d069cc68b0df113d3

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	link_hash_copy_indirect and symbol flags

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/e8/e81830c5c61a8665c098189d069cc68b0df113d3/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=aab812c>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=aab812c>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4765>

Commit(s) tested:
	9acc85a62eb76c270724bba15c889d2d05567b6a

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Use dynrelro for symbols in relro sections too

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/9a/9acc85a62eb76c270724bba15c889d2d05567b6a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=aab812c>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=aab812c>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4763>

Commit(s) tested:
	9d19e4fdb7c684329c8b1b72796a0071708dabc7

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Put .dynbss and .rel.bss shortcuts in main elf hash table

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/9d/9d19e4fdb7c684329c8b1b72796a0071708dabc7/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=aab812c>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=aab812c>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4761>

Commit(s) tested:
	4d4f40e041ce7c8c7c8e50f957e0440b64ab7e95

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Remove EI_ABIVERSION 5 allocation for PT_GNU_STACK support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/4d/4d4f40e041ce7c8c7c8e50f957e0440b64ab7e95/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4759>

Commit(s) tested:
	bdd152861ce75c36828904cf3d10f8ce14da6cf5

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS16: Simplify extended operand handling

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/bd/bdd152861ce75c36828904cf3d10f8ce14da6cf5/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4756>

Commit(s) tested:
	b2805ed55456cea2694d31fc8627cca17120267b

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS16: Remove "extended" BREAK/SDBBP handling

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/b2/b2805ed55456cea2694d31fc8627cca17120267b/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4754>

Commit(s) tested:
	9e76c212e6311abaee4d02473473f7d6dcad972f

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	opcodes: Use autoconf to check for `bfd_mips_elf_get_abiflags' in BFD

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/9e/9e76c212e6311abaee4d02473473f7d6dcad972f/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4753>

Commit(s) tested:
	5b362f04b2a56d446b024027963be52d61f939cb

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	Fix more cases of improper test names

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/5b/5b362f04b2a56d446b024027963be52d61f939cb/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4752>

Commit(s) tested:
	7dc53023ec5d000b3b8d287720ed8d04d91e02ec

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	Fix incorrect reference to source files

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/7d/7dc53023ec5d000b3b8d287720ed8d04d91e02ec/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4749>

Commit(s) tested:
	865422fafaf387745b2979d47b6f448d28e0edb8

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	hppa-linux-gnu-ranlib: libcpp.a: File format not recognized

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/86/865422fafaf387745b2979d47b6f448d28e0edb8/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4748>

Commit(s) tested:
	6096dda15babc5307b1a0e9624d4e0028fd429e1

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	Updated email address.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/60/6096dda15babc5307b1a0e9624d4e0028fd429e1/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4747>

Commit(s) tested:
	99b5dbf2e78a63ba4be067bfabb3bec1a6406f1c

Author(s) (in the same order as the commits):
	Tristan Gingold <gingold@adacore.com>

Subject:
	Bump version to 2.28.51

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/99/99b5dbf2e78a63ba4be067bfabb3bec1a6406f1c/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4746>

Commit(s) tested:
	e0e7a9d436cb3c97ae89c9b0d2750a006746b233

Author(s) (in the same order as the commits):
	Tristan Gingold <gingold@adacore.com>

Subject:
	Regenerate pot files.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/e0/e0e7a9d436cb3c97ae89c9b0d2750a006746b233/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4745>

Commit(s) tested:
	ce0db13751aed2782c417bc4cf715313f9273e94

Author(s) (in the same order as the commits):
	Doug Evans <xdje42@gmail.com>

Subject:
	infrun.c (set_step_over_info): Add comment.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ce/ce0db13751aed2782c417bc4cf715313f9273e94/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4743>

Commit(s) tested:
	112e8700a6fd2fed65ca70132c9cbed4132e8bd4

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Class-ify ui_out

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/11/112e8700a6fd2fed65ca70132c9cbed4132e8bd4/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4742>

Commit(s) tested:
	87903eafb083abbf330c22fbf941fcbad700c098

Author(s) (in the same order as the commits):
	Jim Wilson <jim.wilson@linaro.org>

Subject:
	Fix bugs with float compare and Inf operands.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/87/87903eafb083abbf330c22fbf941fcbad700c098/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4740>

Commit(s) tested:
	58a6d3c9d8d4d4be8f1dfc1a49fed264dceddaba

Author(s) (in the same order as the commits):
	Andrew Waterman <andrew@sifive.com>

Subject:
	Avoid creating symbol table entries for registers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/58/58a6d3c9d8d4d4be8f1dfc1a49fed264dceddaba/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4738>

Commit(s) tested:
	4e25adb3956f880efc28bfebabe79be7338b413f

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Remove high bit set characters

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/4e/4e25adb3956f880efc28bfebabe79be7338b413f/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4734>

Commit(s) tested:
	2693a26216c329bd7ec2aae7743409f572de4fa5

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix longjmp across readline w/ --enable-sjlj-exceptions toolchains

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/26/2693a26216c329bd7ec2aae7743409f572de4fa5/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4733>

Commit(s) tested:
	ff71884063d048e8f8c03de27d2bac343df4f77a

Author(s) (in the same order as the commits):
	Antoine Tremblay <antoine.tremblay@ericsson.com>

Subject:
	Set emacs default mode for the GDB directory to C++

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ff/ff71884063d048e8f8c03de27d2bac343df4f77a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4729>

Commit(s) tested:
	c97dda72b905d5ba9b82004bf4e57dd4cf343147

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS16/opcodes: Correct I64/SDRASP opcode's ISA membership

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c9/c97dda72b905d5ba9b82004bf4e57dd4cf343147/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4728>

Commit(s) tested:
	3e67a37820a2838cdbd50f3f697ddc929443ceaa

Author(s) (in the same order as the commits):
	Andrew Waterman <andrew@sifive.com>

Subject:
	Correct assembler mnemonic for RISC-V aqrl AMOs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/3e/3e67a37820a2838cdbd50f3f697ddc929443ceaa/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4727>

Commit(s) tested:
	04386d9ed5f068b74757bfac01670576e4e59b8a

Author(s) (in the same order as the commits):
	Andrew Waterman <andrew@sifive.com>

Subject:
	Fix disassembly of RISC-V CSR instructions under -Mno-aliases

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/04/04386d9ed5f068b74757bfac01670576e4e59b8a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4724>

Commit(s) tested:
	1d61f7949f77796ee407466f3ca7f42dcde9251b

Author(s) (in the same order as the commits):
	Andrew Waterman <andrew@sifive.com>

Subject:
	Fix an integer overflow in RISC-V relocation handling

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/1d/1d61f7949f77796ee407466f3ca7f42dcde9251b/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4721>

Commit(s) tested:
	96b0927de3ebdb302d8d571c43da3db5ec23847e

Author(s) (in the same order as the commits):
	Palmer Dabbelt <palmer@dabbelt.com>

Subject:
	Improve RISC-V LD error message

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/96/96b0927de3ebdb302d8d571c43da3db5ec23847e/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4720>

Commit(s) tested:
	dd1d944e2321de26f75a21f42750dd38ed964714

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Add opcodes RISC-V dependencies

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/dd/dd1d944e2321de26f75a21f42750dd38ed964714/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4714>

Commit(s) tested:
	4df995c77118d07c12fb260dbba0ca2b281324f1

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/opcodes: Only call `bfd_mips_elf_get_abiflags' if BFD64

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/4d/4df995c77118d07c12fb260dbba0ca2b281324f1/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4706>

Commit(s) tested:
	8184783a4069e04deb2e43b4ad0d66d80f1ad2df

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/opcodes: Reorder ELF file header flag handling in disassembler

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/81/8184783a4069e04deb2e43b4ad0d66d80f1ad2df/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4703>

Commit(s) tested:
	c1fc2d7ee590f3bc87ee79c36e7216b0b6bb054b

Author(s) (in the same order as the commits):
	Yury Norov <ynorov@caviumnetworks.com>

Subject:
	ld: aarch64: fix TLS relaxation where TCB_SIZE is used

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c1/c1fc2d7ee590f3bc87ee79c36e7216b0b6bb054b/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4702>

Commit(s) tested:
	7acd51d6971f12b832cd7281f669a7ae7feddf45

Author(s) (in the same order as the commits):
	Yury Norov <ynorov@caviumnetworks.com>

Subject:
	Revert "bfd: aarch64: fix word and arrdess size declaration in ilp32 mode"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/7a/7acd51d6971f12b832cd7281f669a7ae7feddf45/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4701>

Commit(s) tested:
	98fa61facff8fb041205950d642f5403372bfd96

Author(s) (in the same order as the commits):
	Yury Norov <ynorov@caviumnetworks.com>

Subject:
	Revert "ld: aarch64: fix TLS relaxation where TCB_SIZE is used"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/98/98fa61facff8fb041205950d642f5403372bfd96/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4700>

Commit(s) tested:
	a02c3512655cc2c8ad68e4b656959b7d284acc7d

Author(s) (in the same order as the commits):
	Yury Norov <ynorov@caviumnetworks.com>

Subject:
	bfd: aarch64: fix word and arrdess size declaration in ilp32 mode

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/a0/a02c3512655cc2c8ad68e4b656959b7d284acc7d/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4699>

Commit(s) tested:
	6650f7bd18f8161b9f666d3e65a6346e23a9d85f

Author(s) (in the same order as the commits):
	Yury Norov <ynorov@caviumnetworks.com>

Subject:
	ld: aarch64: fix TLS relaxation where TCB_SIZE is used

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/66/6650f7bd18f8161b9f666d3e65a6346e23a9d85f/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4698>

Commit(s) tested:
	a6a51754740513db76fdee3aa153cdd51e87a24a

Author(s) (in the same order as the commits):
	Renlin Li <renlin.li@arm.com>

Subject:
	[Binutils][AARCH64]Remove Cn register for coprocessor CRn, CRm field

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/a6/a6a51754740513db76fdee3aa153cdd51e87a24a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4690>

Commit(s) tested:
	3a0b8f7ddb874283879baaf8af6d11094f4c4999

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Handle memory error in print_insn_rl78_common

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/3a/3a0b8f7ddb874283879baaf8af6d11094f4c4999/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=6472016>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=6472016>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4688>

Commit(s) tested:
	64c111834081a117f902cffc15dadbc535f1c65e

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS16: Remove unused `>' operand code

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/64/64c111834081a117f902cffc15dadbc535f1c65e/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4686>

Commit(s) tested:
	55af478400524cba7994e353fd9a98ef1543df2f

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS16/opcodes: Reformat raw EXTEND and undecoded output

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/55/55af478400524cba7994e353fd9a98ef1543df2f/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4681>

Commit(s) tested:
	1a31b34a18d61dee55042f2ab23c8fa9203fe6ef

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Create tdep->rl78_psw_type lazily

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/1a/1a31b34a18d61dee55042f2ab23c8fa9203fe6ef/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4679>

Commit(s) tested:
	fc2f703edb656c69b0026a006c6063cdb255e06a

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Use code cache in aarch64 prologue analyzer

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/fc/fc2f703edb656c69b0026a006c6063cdb255e06a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4676>

Commit(s) tested:
	c752a4cccb99ba73f51eff74b394dcdcd26d4c59

Author(s) (in the same order as the commits):
	Thomas Schwinge <thomas@codesourcery.com>

Subject:
	Hurd: Adjust to changes to "push pruning old threads down to the target"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c7/c752a4cccb99ba73f51eff74b394dcdcd26d4c59/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4675>

Commit(s) tested:
	53488a6e194af11c2528e5e284facb8a6171b695

Author(s) (in the same order as the commits):
	Thomas Schwinge <thomas@codesourcery.com>

Subject:
	Avoid PATH_MAX usage

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/53/53488a6e194af11c2528e5e284facb8a6171b695/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4674>

Commit(s) tested:
	39f66f3ae25ebd3a065218ce880280fd5b4b861c

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS16/opcodes: Fix off-by-one indentation in `print_mips16_insn_arg'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/39/39f66f3ae25ebd3a065218ce880280fd5b4b861c/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4673>

Commit(s) tested:
	860b03a8f357d1565bd9d79ae25121059b2d28ae

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS16/opcodes: Fix PC-relative operation delay-slot adjustment

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/86/860b03a8f357d1565bd9d79ae25121059b2d28ae/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4661>

Commit(s) tested:
	4b0781150f69b6ff251dac447c77e4d4f6598da8

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/include: opcode/mips.h: Correct INSN_CHIP_MASK

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/4b/4b0781150f69b6ff251dac447c77e4d4f6598da8/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4656>

Commit(s) tested:
	c2596ca5d7f6ab6d38882bf0f0fc44fe352afcb1

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix internal error in the linker by replacing a call to abort with an error message.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c2/c2596ca5d7f6ab6d38882bf0f0fc44fe352afcb1/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4654>

Commit(s) tested:
	4f3ca05b487e9755018b4c9a053a2e6c35d8a7df

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix seg-fault in strip when copying a corrupt binary.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/4f/4f3ca05b487e9755018b4c9a053a2e6c35d8a7df/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4652>

Commit(s) tested:
	7c2ba67e6ab10879968c938aefd4d0d0b4ce79bc

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Assert on lval_register

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/7c/7c2ba67e6ab10879968c938aefd4d0d0b4ce79bc/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/store.exp: var longest l; setting l to 4
PASS -> FAIL: gdb.base/store.exp: upvar longest l; set l to 4
PASS -> FAIL: gdb.base/store.exp: var struct 4 u; set u to s_4
PASS -> FAIL: gdb.base/store.exp: up struct 4 u; set u to s_4
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4650>

Commit(s) tested:
	fc72affa6875e81fc9d495a216a8bcb34045ffcd

Author(s) (in the same order as the commits):
	DJ Delorie <dj@redhat.com>

Subject:
	argv.c (expandargv): Check for directories passed as @-files.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/fc/fc72affa6875e81fc9d495a216a8bcb34045ffcd/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4644>

Commit(s) tested:
	a12fd8e1b1c9c6a16e3cc9fc477d7e459776b587

Author(s) (in the same order as the commits):
	Szabolcs Nagy <szabolcs.nagy@arm.com>

Subject:
	[ARM] Add ARMv8.3 command line option and feature flag

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/a1/a12fd8e1b1c9c6a16e3cc9fc477d7e459776b587/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4641>

Commit(s) tested:
	daae68f4f372e0618d6b9c64ec0f1f74eae6ab3d

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix seg-fault in linker parsing a corrupt input file.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/da/daae68f4f372e0618d6b9c64ec0f1f74eae6ab3d/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=031aa1e>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=031aa1e>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4638>

Commit(s) tested:
	668650d58d61d9d170f3e5b5c1657ed1c3e2b34b

Author(s) (in the same order as the commits):
	Jim Wilson <jim.wilson@linaro.org>

Subject:
	Fix bugs with tbnz/tbz instructions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/66/668650d58d61d9d170f3e5b5c1657ed1c3e2b34b/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
PASS -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4634>

Commit(s) tested:
	8400d40d954ec3b4a3fe9200645a1b6e90ba46f4

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Indirect and warning symbols

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/84/8400d40d954ec3b4a3fe9200645a1b6e90ba46f4/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4628>

Commit(s) tested:
	01770bbde902e075e524b518ac6c1087a4cc1cfb

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR 20559 - "eval" command and $arg0...$arg9/$argc substitution

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/01/01770bbde902e075e524b518ac6c1087a4cc1cfb/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4622>

Commit(s) tested:
	233c8c27eb81b0a3ab5182dcb59c7306ba9bd3f3

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Remove mi_out_data::suppress_output

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/23/233c8c27eb81b0a3ab5182dcb59c7306ba9bd3f3/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4615>

Commit(s) tested:
	77a179e77b38161e461f5e37512f0b3fc3582181

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	ui_out_table: Replace boolean flag with enum

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/77/77a179e77b38161e461f5e37512f0b3fc3582181/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4613>

Commit(s) tested:
	909c0aa5824080c287b390f82726cf5bfb7011e3

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Class-ify ui_out_level

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/90/909c0aa5824080c287b390f82726cf5bfb7011e3/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4612>

Commit(s) tested:
	37e20dd6599203c4e261fc3a2e86711c90cbbed9

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Class-ify ui_out_hdr

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/37/37e20dd6599203c4e261fc3a2e86711c90cbbed9/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4611>

Commit(s) tested:
	c5209615263fd0444da28cdfb6661ad287909a70

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Use std::string for ui_out_hdr's text fields

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c5/c5209615263fd0444da28cdfb6661ad287909a70/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4609>

Commit(s) tested:
	84c93cd5f1ff869eb8c04314738eaa2cddb3c29e

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	Fixup testcases outputting own name as a test name and standardize failed compilation messages

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/84/84c93cd5f1ff869eb8c04314738eaa2cddb3c29e/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4606>

Commit(s) tested:
	bb95117e107fe58ecd35683bf0e8da3b414378ff

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	Fix test names starting with uppercase using multi-line gdb_test/mi_gdb_test

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/bb/bb95117e107fe58ecd35683bf0e8da3b414378ff/>

*** Diff to previous build ***
============================
new FAIL: gdb.ada/mi_interface.exp: create ggg1 varobj
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4603>

Commit(s) tested:
	cdc7edd7b17dddd3558bd04d9b2fb5a73dc75f1c

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	Fix test names starting with uppercase using gdb_test on a single line.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/cd/cdc7edd7b17dddd3558bd04d9b2fb5a73dc75f1c/>

*** Diff to previous build ***
============================
new FAIL: gdb.go/package.exp: going to first breakpoint
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4595>

Commit(s) tested:
	95a23284a3db0ec85bb0b11c70e6b5acf00563f6

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Use std::string in ui_out_table

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/95/95a23284a3db0ec85bb0b11c70e6b5acf00563f6/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4594>

Commit(s) tested:
	b9b118c3bb29052ee76c6bf32b99962cda5113ba

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Use std::vector for cli_ui_out_data::streams

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/b9/b9b118c3bb29052ee76c6bf32b99962cda5113ba/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4588>

Commit(s) tested:
	e9a38e0f5287ce7b4629f5f923191e38dd7355c0

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Revert accidental elf.c change

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/e9/e9a38e0f5287ce7b4629f5f923191e38dd7355c0/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4587>

Commit(s) tested:
	ea3d7d1cab4221ab729327bb4d957352c79d05f0

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	PR20886, looping in ppc64_elf_size_stubs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ea/ea3d7d1cab4221ab729327bb4d957352c79d05f0/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4579>

Commit(s) tested:
	ee40d8d45213caf0cfb63e603f0fd5a58532e751

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Move computed value's frame id to piece_closure

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ee/ee40d8d45213caf0cfb63e603f0fd5a58532e751/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/store.exp: var longest l; print new l, expecting 4
PASS -> FAIL: gdb.base/store.exp: var longest l; print incremented l, expecting 2
PASS -> FAIL: gdb.base/store.exp: upvar longest l; print new l, expecting 4
PASS -> FAIL: gdb.base/store.exp: var struct 4 u; print new u, expecting {s = \{1, 2, 3, 4}}
PASS -> FAIL: gdb.base/store.exp: up struct 4 u; print new u, expecting {s = \{1, 2, 3, 4}}
PASS -> FAIL: gdb.dwarf2/pieces.exp: set a.i in pieces:f3
PASS -> FAIL: gdb.dwarf2/pieces.exp: print new a.i in pieces:f3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4575>

Commit(s) tested:
	d2c0eef48a1bb331ca08f8f26ff82c5d4086ba0c

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Constify wrap_here/wrap_hint code path

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/d2/d2c0eef48a1bb331ca08f8f26ff82c5d4086ba0c/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4572>

Commit(s) tested:
	0abe66b59fda0689c32fe9d96b3690b4d49a3027

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Rename ui_out_data to mi_ui_out_data

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/0a/0abe66b59fda0689c32fe9d96b3690b4d49a3027/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4569>

Commit(s) tested:
	8227ffad95fcd835dd5fcb3e4915159e4552b397

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Remove check requiring void argument to functions with no parameters.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/82/8227ffad95fcd835dd5fcb3e4915159e4552b397/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4567>

Commit(s) tested:
	8ce9efb079b6e7b3ab2e795db9477656375d7204

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix typos in comment

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/8c/8ce9efb079b6e7b3ab2e795db9477656375d7204/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4563>

Commit(s) tested:
	bbe910e6e1140cb484a74911f3cea854cf9e7e2a

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Add noexcept to custom non-throwing new operators.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/bb/bbe910e6e1140cb484a74911f3cea854cf9e7e2a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4559>

Commit(s) tested:
	da5b30da2d1167591aa8d71b543f97bfdc2ec2a2

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	Fix PR12616 - gdb does not implement DW_AT_data_bit_offset

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/da/da5b30da2d1167591aa8d71b543f97bfdc2ec2a2/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4553>

Commit(s) tested:
	b593ecca856860a8b38deb808493bba4beef3aee

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Makefiles: Flatten and sort file lists

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/b5/b593ecca856860a8b38deb808493bba4beef3aee/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4548>

Commit(s) tested:
	9986ba08876f86f7d36d230afc11b60a34287da8

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdbserver: Use warning for warnings

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/99/9986ba08876f86f7d36d230afc11b60a34287da8/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4546>

Commit(s) tested:
	ca3cbe5cd7715d1559d55f8e71be1dd7340f13b1

Author(s) (in the same order as the commits):
	Ambrogino Modigliani <ambrogino.modigliani@gmail.com>

Subject:
	Fix spelling mistakes in comments in shell scripts

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ca/ca3cbe5cd7715d1559d55f8e71be1dd7340f13b1/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4543>

Commit(s) tested:
	b2260160f8cde8de118914ddeaf797bea42e65ce

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	gdbarch software_single_step frame_info to regcache: spu

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/b2/b2260160f8cde8de118914ddeaf797bea42e65ce/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4542>

Commit(s) tested:
	fb090cfa157e35fac1c10c062fd005e38b894ea4

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	gdbarch software_single_step frame_info to regcache: tic6x

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/fb/fb090cfa157e35fac1c10c062fd005e38b894ea4/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4541>

Commit(s) tested:
	41e26ad32d17ee35f79f629654811f5e8656cab8

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	gdbarch software_single_step frame_info to regcache: rs6000

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/41/41e26ad32d17ee35f79f629654811f5e8656cab8/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4538>

Commit(s) tested:
	3889f4909e0db5f5ca8ca043ef9825f0ad971fd6

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	gdbarch software_single_step frame_info to regcache: nios2

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/38/3889f4909e0db5f5ca8ca043ef9825f0ad971fd6/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4536>

Commit(s) tested:
	7113a196bac7f1134bcdd79ad3e6badcb5d77f95

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	gdbarch software_single_step frame_info to regcache: mips

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/71/7113a196bac7f1134bcdd79ad3e6badcb5d77f95/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4533>

Commit(s) tested:
	0187a92f57b516f7171e70bec46701cfdaa6c6bd

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	gdbarch software_single_step frame_info to regcache: aarch64

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/01/0187a92f57b516f7171e70bec46701cfdaa6c6bd/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4532>

Commit(s) tested:
	9fd15b2e80452f03edb3fb36c2b4c36d05f4ef4e

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	New regcache_raw_get_signed

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/9f/9fd15b2e80452f03edb3fb36c2b4c36d05f4ef4e/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4531>

Commit(s) tested:
	6884417a0ff3555b192d4aceeacc5e7232cad207

Author(s) (in the same order as the commits):
	Jose E. Marchesi <jose.marchesi@oracle.com>

Subject:
	gas,opcodes: fix hardware capabilities bumping in the sparc assembler.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/68/6884417a0ff3555b192d4aceeacc5e7232cad207/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4528>

Commit(s) tested:
	95f0d0d2338f8eba18d2b3c8cbe15b1d584b885c

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Use input_bfd in relocate_section

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/95/95f0d0d2338f8eba18d2b3c8cbe15b1d584b885c/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4526>

Commit(s) tested:
	d0de53e251ce60057d91536a4c71740b047be040

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Add missing POSTCOMPILE step to mi/ file generation rules

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/d0/d0de53e251ce60057d91536a4c71740b047be040/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4524>

Commit(s) tested:
	3fff9862d5229def9318912c2de64a03dab74532

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Create subobject value in pretty printer

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/3f/3fff9862d5229def9318912c2de64a03dab74532/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.arch/i386-sse.exp: check contents of data[0]
PASS -> FAIL: gdb.arch/i386-sse.exp: check contents of data[1]
PASS -> FAIL: gdb.arch/i386-sse.exp: check contents of data[2]
PASS -> FAIL: gdb.arch/i386-sse.exp: check contents of data[3]
PASS -> FAIL: gdb.arch/i386-sse.exp: check contents of data[4]
PASS -> FAIL: gdb.arch/i386-sse.exp: check contents of data[5]
PASS -> FAIL: gdb.arch/i386-sse.exp: check contents of data[6]
PASS -> FAIL: gdb.arch/i386-sse.exp: check contents of data[7]
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4522>

Commit(s) tested:
	cc188e5fd6d4f8d3061ed6c58c432a150f7966e9

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	ARI: Add detection of printf_vma and sprintf_vma

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/cc/cc188e5fd6d4f8d3061ed6c58c432a150f7966e9/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4520>

Commit(s) tested:
	ef787763b9495913d5be90bcdedcecb553cbf308

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Makefile: fix typo

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ef/ef787763b9495913d5be90bcdedcecb553cbf308/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4519>

Commit(s) tested:
	cc133f9f118ef4afd93da0ecba48151488c41c74

Author(s) (in the same order as the commits):
	James Clarke <jrtc27@jrtc27.com>

Subject:
	bfd: fix negative GOT offsets for non-local references on sparc64

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/cc/cc133f9f118ef4afd93da0ecba48151488c41c74/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4518>

Commit(s) tested:
	535aade664ac4170fe82e52c9addd686156220a1

Author(s) (in the same order as the commits):
	David Tolnay <dtolnay@gmail.com>

Subject:
	libiberty: Add Rust symbol demangling.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/53/535aade664ac4170fe82e52c9addd686156220a1/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4514>

Commit(s) tested:
	a4ddf8dc72f0ac10c3459a91949eb1bdb07ed10d

Author(s) (in the same order as the commits):
	Jason Merrill <jason@redhat.com>

Subject:
	Implement P0012R1, Make exception specifications part of the type system.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/a4/a4ddf8dc72f0ac10c3459a91949eb1bdb07ed10d/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4509>

Commit(s) tested:
	c2c4ff8d52a2cd3263a547b0384692498714aa1b

Author(s) (in the same order as the commits):
	Szabolcs Nagy <szabolcs.nagy@arm.com>

Subject:
	[AArch64] Add ARMv8.3 FCMLA and FCADD instructions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/c2/c2c4ff8d52a2cd3263a547b0384692498714aa1b/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4505>

Commit(s) tested:
	6ec49e7c0aeb6d98e379319b565aee2c89388615

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Help diagnose problems with the metag target when mixing static and shared binaries.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/6e/6ec49e7c0aeb6d98e379319b565aee2c89388615/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4501>

Commit(s) tested:
	f2ff9acd32b4667ee16a03ca8d10fd8b99e22f46

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Document new hard requirement on GNU make

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/f2/f2ff9acd32b4667ee16a03ca8d10fd8b99e22f46/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4497>

Commit(s) tested:
	19f1935d91bfabbe4176ffdaca95bc789b593153

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb/tracepoint.c: Don't use printf_vma

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/19/19f1935d91bfabbe4176ffdaca95bc789b593153/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4496>

Commit(s) tested:
	256ae5dbc73d1348850f86ee77a0dc3b04bc7cc0

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Stash frame id of current frame before stashing frame id for previous frame

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/25/256ae5dbc73d1348850f86ee77a0dc3b04bc7cc0/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4492>

Commit(s) tested:
	1a2f3d7ff1d79b1290704e48c71e905b987393a6

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Extend test gdb.python/py-recurse-unwind.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/1a/1a2f3d7ff1d79b1290704e48c71e905b987393a6/>

*** Diff to previous build ***
============================
new FAIL: gdb.python/py-recurse-unwind.exp: check_user_reg_pc: continue to breakpoint: ccc
new FAIL: gdb.python/py-recurse-unwind.exp: check_user_reg_pc: backtrace
new FAIL: gdb.python/py-recurse-unwind.exp: check_pae_pc: backtrace
new FAIL: gdb.python/py-recurse-unwind.exp: check_pae_pc: python unwinder called
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4491>

Commit(s) tested:
	4cb771f214ed6a2102e37bce255c6be5d0642f3a

Author(s) (in the same order as the commits):
	Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>

Subject:
	Fix PR20789 - relaxation with negative valued diff relocs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/4c/4cb771f214ed6a2102e37bce255c6be5d0642f3a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4490>

Commit(s) tested:
	4c62b19fd2e6b81ce7cbb7d01e84c09352ccf224

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: update gnulib to pull in C++ namespace support fixes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/4c/4c62b19fd2e6b81ce7cbb7d01e84c09352ccf224/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4488>

Commit(s) tested:
	b22e99fdaf2efe58161c382bbd55f4572ba49eef

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb::{unique_ptr,move} -> std::{unique_ptr,move}

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/b2/b22e99fdaf2efe58161c382bbd55f4572ba49eef/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4487>

Commit(s) tested:
	b7f38fdae7c75e1d13abd455b3931950db28d22b

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	bitfield-parent-optimized-out: Fix struct definition

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/b7/b7f38fdae7c75e1d13abd455b3931950db28d22b/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4481>

Commit(s) tested:
	d93f4d96bb0fb307db9e2dade38ddb3c6bc469ca

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use std::string in rust_get_disr_info

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/d9/d93f4d96bb0fb307db9e2dade38ddb3c6bc469ca/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4480>

Commit(s) tested:
	7d15592e06e4abccc97cb8c5670f564327f747e9

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Don't handle unavailable/optimized-out in spu_software_single_step

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/7d/7d15592e06e4abccc97cb8c5670f564327f747e9/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4473>

Commit(s) tested:
	3d731f6949e2b0099cfbe0cf608d60a52a66d354

Author(s) (in the same order as the commits):
	Szabolcs Nagy <szabolcs.nagy@arm.com>

Subject:
	[AArch64] Increase max_num_aliases in aarch64-gen

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/3d/3d731f6949e2b0099cfbe0cf608d60a52a66d354/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4471>

Commit(s) tested:
	7103ad7639b7ed80bec170404185a8e39079446b

Author(s) (in the same order as the commits):
	Luke Allardyce <lukeallardyce@gmail.com>

Subject:
	Accept hidden COFF symbols, but treat them as if they were debugging symbols.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/71/7103ad7639b7ed80bec170404185a8e39079446b/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4470>

Commit(s) tested:
	668e167446b2777869f413841ec05aed59473d9f

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Remove apply_val_pretty_printer parameter valaddr

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/66/668e167446b2777869f413841ec05aed59473d9f/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4469>

Commit(s) tested:
	65408fa680538f997cdd4b6fb9d74f043a060801

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Remove parameter valaddr from c print functions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/65/65408fa680538f997cdd4b6fb9d74f043a060801/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4468>

Commit(s) tested:
	91588b3af8e026ba11c7368476cc1f3fa8c2e2b1

Author(s) (in the same order as the commits):
	Mike Frysinger <vapier@gentoo.org>

Subject:
	sim: mips: fix dv-tx3904cpu build error

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/91/91588b3af8e026ba11c7368476cc1f3fa8c2e2b1/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4464>

Commit(s) tested:
	a18590c38657a982f8d544f2f54f39ba9abe9fca

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Provide a more helpful error message when the BFD library is unable to load an extremely large section.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/a1/a18590c38657a982f8d544f2f54f39ba9abe9fca/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4449>

Commit(s) tested:
	1f334aeb2268db153f01143e9b0ac01448ecaa56

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	X86: Remove the THREE_BYTE_0F7A entry

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/1f/1f334aeb2268db153f01143e9b0ac01448ecaa56/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4462>

Commit(s) tested:
	9b9720149dfee4a9a961c29d0382fc5bdf9c975b

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use unique_xmalloc_ptr in Python code

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/9b/9b9720149dfee4a9a961c29d0382fc5bdf9c975b/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4448>

Commit(s) tested:
	7353f2470c2eda19c31c9fa44c315c7c69dea7c4

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix py-value.exp failure on Python 3

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/73/7353f2470c2eda19c31c9fa44c315c7c69dea7c4/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4453>

Commit(s) tested:
	7bc2c8b83ea82b4315c67e7658af815aed062e73

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	tui-winsource: Allocate for actual lines only

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/7b/7bc2c8b83ea82b4315c67e7658af815aed062e73/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4450>

Commit(s) tested:
	82b19a4d2f9c9e8d56fdffdd702f7db4af486386

Author(s) (in the same order as the commits):
	Tristan Gingold <gingold@adacore.com>

Subject:
	darwin-nat.c: handle Darwin 16 (aka Sierra).

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/82/82b19a4d2f9c9e8d56fdffdd702f7db4af486386/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4444>

Commit(s) tested:
	3cde5c42d1c1ddcf8bbde5c47233c644370c959c

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Eliminate agent_expr_p; VEC -> std::vector in struct bp_target_info

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/3c/3cde5c42d1c1ddcf8bbde5c47233c644370c959c/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4452>

Commit(s) tested:
	f5396833d35a257902409493a63f777dcd771868

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	tui-disasm: Fix line buffer size calculation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/f5/f5396833d35a257902409493a63f777dcd771868/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4461>

Commit(s) tested:
	60227d64dd9228be1a07fc7122894fc2875b1a70

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	X86: Remove the .s suffix from EVEX vpextrw

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/60/60227d64dd9228be1a07fc7122894fc2875b1a70/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4457>

Commit(s) tested:
	64f367a201565d5c7d1e03da072db51123ac2174

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb/testsuite: Introduce "proc_with_prefix"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/64/64f367a201565d5c7d1e03da072db51123ac2174/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4459>

Commit(s) tested:
	7efeed176a291c15c74e80aee5d7f906e28081cf

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	X86: Merge AVX512F vmovq

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/7e/7efeed176a291c15c74e80aee5d7f906e28081cf/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4463>

Commit(s) tested:
	ac33b731d214d79738ca04d27f7464d4482f6a01

Author(s) (in the same order as the commits):
	Jiong Wang <jiong.wang@arm.com>

Subject:
	[AArch64] Bind defined symbol locally in PIE

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/ac/ac33b731d214d79738ca04d27f7464d4482f6a01/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4456>

Commit(s) tested:
	6c73cd95f96d37dbf6092a87c8ba0f35277223a5

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	agent_expr_up: gdb::unique_ptr -> std::unique_ptr

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/6c/6c73cd95f96d37dbf6092a87c8ba0f35277223a5/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4458>

Commit(s) tested:
	8354c62cd144964fce17e11ce035c0c2c0635cbf

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Make gdb.mi/user-selected-context-sync.exp use proc_with_prefix

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/83/8354c62cd144964fce17e11ce035c0c2c0635cbf/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4460>

Commit(s) tested:
	fad0c9fb7dd362bdb5a3e4f89fb7f6e6789f5beb

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Further cleanup/modernization of gdb.base/commands.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/fa/fad0c9fb7dd362bdb5a3e4f89fb7f6e6789f5beb/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4445>

Commit(s) tested:
	cc977dc7d53ef4546592a4f02a2e06a621beae6f

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Use get_frame_register_value instead of deprecated_frame_register_read

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/cc/cc977dc7d53ef4546592a4f02a2e06a621beae6f/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4446>

Commit(s) tested:
	e8b24d9ff5b9419fc079f5fe975fac6f499f8bfb

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Remove parameter valaddr from la_val_print

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/e8/e8b24d9ff5b9419fc079f5fe975fac6f499f8bfb/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4451>

Commit(s) tested:
	0bb65f1e7c9eed7338ef2e4a2f5b42d010409c39

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	tui-disasm: Fix window content buffer overrun

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/0b/0bb65f1e7c9eed7338ef2e4a2f5b42d010409c39/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4442>

Commit(s) tested:
	2f408ecb929bd56613e94cf1e84ace4692c78257

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use ui_file_as_string throughout more

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/2f/2f408ecb929bd56613e94cf1e84ace4692c78257/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4455>

Commit(s) tested:
	7a63494a0df60cf71b9cf03c4eb8f24719d03e66

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Use vector::emplace_back

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/7a/7a63494a0df60cf71b9cf03c4eb8f24719d03e66/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4454>

Commit(s) tested:
	8c84bffb45ac63b98fffc5c1a492c2eb7e4f27e2

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	tui-winsource: Remove failed-allocation logic

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/8c/8c84bffb45ac63b98fffc5c1a492c2eb7e4f27e2/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4443>

Commit(s) tested:
	833177a4a5c1a2a6cabe70bfe35ecf241b68d169

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	'struct agent_expr *' -> unique_ptr<agent_expr>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/83/833177a4a5c1a2a6cabe70bfe35ecf241b68d169/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4447>

Commit(s) tested:
	30a7bb833cbd848b1814f18b91dfdafba4e86839

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix some error-handling bugs in python frame filters

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/30/30a7bb833cbd848b1814f18b91dfdafba4e86839/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4441>

Commit(s) tested:
	d2af8993a7cac29eaa5a4efd47c9117bbd175068

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use ui_file_as_string in gdb/language.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-i686/d2/d2af8993a7cac29eaa5a4efd47c9117bbd175068/>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4435>

Commit(s) tested:
	66bbce5bda870c49a68f2b77a29fb96eca72632f

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use ui_file_as_string in gdb/c-exp.y

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e78243bc3084d3797514954de0040e6f9fc9841a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4434>

Commit(s) tested:
	aaee65aea29ac8f7317e866d5dbef9f96cfdb253

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use ui_file_as_string in gdb/compile/

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2bb94fdf00b40599612eb75106e612b1a9dc0163>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4431>

Commit(s) tested:
	c92aed165e8af79f51c5165f98f12389bb59a121

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use ui_file_as_string in gdb/python/

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9a0bb7f0305c514f859c77d5d82f296adeac904b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4424>

Commit(s) tested:
	56dbf31760f721893a44d3da26adfccf548995c7

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use ui_file_as_string in gdb/ui-out.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b2315bf9c64fcf63d73e29fdf6d483952be93858>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4421>

Commit(s) tested:
	322a851675234b3c16be6dd5035b07f5e3410ec7

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use ui_file_as_string in dwarf2_compute_name

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d74c88fdecbf56e658e527170f9360aaa7a4aa34>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4413>

Commit(s) tested:
	93f9a11fbdb8f09428b17180d51a09a1bda39a52

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	gdbarch software_single_step returns VEC (CORE_ADDR) *

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c09fc87418114452a29f59c20af0e94929fad277>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4404>

Commit(s) tested:
	5996220cfa24ef6fddb782617720cd56913b1bb7

Author(s) (in the same order as the commits):
	Doug Evans <dje@google.com>

Subject:
	Fix ext lang calls to value_struct_elt.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=324346aebebbb9a4ec4967c50a2279a3f939497c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4398>

Commit(s) tested:
	26c4b26f0cc51f04cdaba3c9e6ff09032bd10d8b

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Fix a few typos

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b036622d52cd2beabebfc5f5d33b2ff751abcd88>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4395>

Commit(s) tested:
	1b7a12f2d68f2f334fbe78cc2db76982ba6d4ef1

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix building binutils for all 32-bit targets by moving riscv32 target into 64-bit builds only.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=aa0a1723531f6c5babd6d932dcca5fd606064eae>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4363>

Commit(s) tested:
	c50730217d606814cda69a2bb6975730c0f1ee63

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	Remove IRIX 5 <sys/proc.h> _KMEMUSER workaround

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ffe580d30e8ef7fc88310ada762ef866f12ccb9d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4362>

Commit(s) tested:
	7e3d947dd6ae45d71aa175b96fbd42a51e93b3f8

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS: Remove remains of legacy remote target support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=619809bfdcb984e3f11ec30ad669964af441c2bb>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4356>

Commit(s) tested:
	8ba42bc5da8015fd0bd9e7f021af9cb0ef252005

Author(s) (in the same order as the commits):
	Eli Zaretskii <eliz@gnu.org>

Subject:
	Support command-line redirection in native MS-Windows debugging

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=160e4b958258f851200b3c85f471b0a5b00277bb>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4355>

Commit(s) tested:
	0bcda68539948828795564b35a497dc69c27f768

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Require C++11

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ec8dcf335a281f9a7885c81a2e465be547c036bf>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4353>

Commit(s) tested:
	f610ab6d3cbab5d8b8ef3f3a93dd81a800ec5725

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb/testsuite: Avoid a buffer overrun in `gdb.base/maint.exp'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d87c08b0f3ab61bddbd14757ff2b4711e86a3eee>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4352>

Commit(s) tested:
	b129b0cacd4c8e982605b7c8d99e96c74155882a

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	Make gdb.base/foll-exec.exp test pattern more general

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=40277c4f6e3698e6dc67d572a5c8f880c9b65ae6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4351>

Commit(s) tested:
	44d83468ec8e5fccf904d66b752ac36e07d66c56

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix gdb.base/maint.exp regressions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b3dab56734376f24f0b15574b03610ed7807b09e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4350>

Commit(s) tested:
	d87fdac3591d57c1a667b9d2dfeb05e3198b0b53

Author(s) (in the same order as the commits):
	Markus Metzger <markus.t.metzger@intel.com>

Subject:
	btrace: bridge gaps

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d0e52c3458c7c9555318464c8b99d73382f1f8f8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/maint.exp: mt set per on for expand-symtabs
PASS -> FAIL: gdb.base/maint.exp: maint set per-command on
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4347>

Commit(s) tested:
	b61ce85cc54bf4acc86714cacd10d6f9f7e89d1b

Author(s) (in the same order as the commits):
	Markus Metzger <markus.t.metzger@intel.com>

Subject:
	btrace: allow leading trace gaps

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ee658854551d8066d5f53e8617874aae9e15a1fb>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4346>

Commit(s) tested:
	63ab433e29b2715f429551cdbec72dab0d752c20

Author(s) (in the same order as the commits):
	Markus Metzger <markus.t.metzger@intel.com>

Subject:
	btrace: fix gap indication

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a651b8419ed135ca5de28eba407fcb787cd32073>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4345>

Commit(s) tested:
	c38058942ececeb32c381a838a10277ba43be94c

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Enable range stepping if software single step is supported

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f874ec48a9469f9ea2af981a3e2bca2e39a979c5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4344>

Commit(s) tested:
	89342618773b64db3e67701c0cd9dd89cdbbc18a

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Get pending events in random

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=230c6c38047001c6fe867a0def2fc1f24e9ffe22>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4342>

Commit(s) tested:
	bb65a718b601ecfebd1ebe5be71728d5c359c31f

Author(s) (in the same order as the commits):
	Andrew Burgess <andrew.burgess@embecosm.com>

Subject:
	gas/arc: Don't rely on bfd list of cpu type for cpu selection

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=548502194b96ad9e3d80a267b381737119ada7c7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/maint.exp: mt set per on for expand-symtabs
PASS -> FAIL: gdb.base/maint.exp: maint set per-command on
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4340>

Commit(s) tested:
	b15cc25cbe7c13e450f77b4a309223b9b3da3936

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make symfile_add_flags and objfile->flags strongly typed

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=33553db5d513cd54e45f48b26801a72f98ae65ab>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4339>

Commit(s) tested:
	85ad3aaf403d2104c82010494d3d4a93a36e2e6f

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Coalesce/aggregate (async) vCont packets/actions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7d6a4d0301915b5aee6d2a51fdbf41fa3c4a81da>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/maint.exp: mt set per on for expand-symtabs
PASS -> FAIL: gdb.base/maint.exp: maint set per-command on
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4338>

Commit(s) tested:
	5a04c4cf5df6d13596e79e7b84520cbe245a5a4d

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdbserver: Leave already-vCont-resumed threads as they were

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=94a2684a72eb0c484d79aae86b09e13d1a16d61c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4334>

Commit(s) tested:
	beb18c865c42ab57176099eecb65bb52e71def85

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make dwarf_expr_context's destructor virtual

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=97ff87994a6910e08bc6d0ad23126013bfb3b020>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4332>

Commit(s) tested:
	b30f354acb39f63bf3213673a0584119e63538b9

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	common/common-defs.h: Define __STDC_FORMAT_MACROS as well

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=65f884205ff38b5a782b164c7748eff85b79dab6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4331>

Commit(s) tested:
	e4426cb42f082b0dc1298a173014f18ff0ff7ea7

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	new-op.c: Add comment about -fsanitize=address

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8d67a357a32a48d1e81cc8a185a5c31ccd70e76f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4330>

Commit(s) tested:
	28fe4f87e0b815f4c0d9b80e0a9f3e6a53c649b3

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Define __STDC_CONSTANT_MACROS/__STDC_LIMIT_MACROS again.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7b02a2403db8496691f155521c6518b29f71da56>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4329>

Commit(s) tested:
	3ef9d661f45abfaca5d0c0bb2ea9ab60470f1bb7

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Don't override operator new if GDB is built with -fsanitize=address

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6946d59bae46f0af5562700d53f7c0db7317258c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4327>

Commit(s) tested:
	b5e1db87897cabfd9beb8b1bd49f7d965c0f2607

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	Fix potential NULL pointer dereference

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3ca6ecce455b9372f920add5db8631c3bed5500b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4326>

Commit(s) tested:
	010ece9c47f1ac08c9436b133a74472713dd709b

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	Fix obvious gotcha in string comparison

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=98dff0b83e919fdd2ff3119c6e881f5cc5c6fb09>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4324>

Commit(s) tested:
	cb93dc7f262978bafe36397a41a56e409a302042

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[GDBserver] Fix conversion warning

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=63d80ff73d6195fdd7d5d4b11ed83109cdde69e0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4323>

Commit(s) tested:
	befbff861e07212f4073e4ce72e4b45cca3e0f8d

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Make some dwarf_expr_context methods pure virtual

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=23f4d9374d3a108e6df124f9b1ca804124f18e97>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4322>

Commit(s) tested:
	ce6c454e5acbaec4e0c22e9c8af0fe7686a53baa

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Change minimal_symbol_reader::record_full to take a bool

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=526606aa24f026b0ce59c5efa8271429680a0faa>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4320>

Commit(s) tested:
	192ca6d8eac4a5538036ef200b95d6ef3dbe9511

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Convert dwarf_expr_context_funcs to methods

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=25e9d5f7a885452f8b69044c95b5e3bd34af572b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/maint.exp: mt set per on for expand-symtabs
PASS -> FAIL: gdb.base/maint.exp: maint set per-command on
PASS -> FAIL: gdb.dwarf2/dw2-op-call.exp: p arraycallnoloc
PASS -> FAIL: gdb.dwarf2/typeddwarf.exp: check value of w at typeddwarf.c:29
PASS -> FAIL: gdb.dwarf2/typeddwarf.exp: check value of x at typeddwarf.c:29
PASS -> FAIL: gdb.dwarf2/typeddwarf.exp: check value of y at typeddwarf.c:29
PASS -> FAIL: gdb.dwarf2/typeddwarf.exp: check value of w at typeddwarf.c:53
PASS -> FAIL: gdb.dwarf2/typeddwarf.exp: check value of x at typeddwarf.c:53
PASS -> FAIL: gdb.dwarf2/typeddwarf.exp: check value of y at typeddwarf.c:53
PASS -> FAIL: gdb.dwarf2/typeddwarf.exp: check value of x at typeddwarf.c:73
PASS -> FAIL: gdb.dwarf2/typeddwarf.exp: check value of y at typeddwarf.c:73
PASS -> FAIL: gdb.dwarf2/typeddwarf.exp: check value of z at typeddwarf.c:73
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4318>

Commit(s) tested:
	718b962660007c529f4ff4c5e940119da21e05a7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Initial conversion of dwarf_expr_ctx

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a37db2c877ff0572a7142ab09d1eb557fc7468af>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4315>

Commit(s) tested:
	d1e4a624699fd734b3b6e87fb79a4da71c182dfd

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use gdb::unique_ptr in elf_read_minimal_symbols

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8c6b1933d700a4ab8e4756f7d5ea03bd5998da58>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/maint.exp: mt set per on for expand-symtabs
PASS -> FAIL: gdb.base/maint.exp: maint set per-command on
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4314>

Commit(s) tested:
	cd9da5b077c21f0984cfbdac060ced6f4945ce06

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Replace two xmallocs with unique_ptr

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d39133e757bae38a74e72c4ad2e9b7027b7bd03c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4313>

Commit(s) tested:
	1e3b796d58ac3c4396e1739f44a0a41de6335eef

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Change command stats reporting to use class

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7f0c071cbaa3cac970639f015e4d20ab919c4888>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/maint.exp: mt set per on for expand-symtabs
PASS -> FAIL: gdb.base/maint.exp: maint set per-command on
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4312>

Commit(s) tested:
	6fc31fc73b577fce960730d87ead9a25df6c2653

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Remove some cleanups in MI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8f8f563dd64e90c167e367d3664638c43054c95d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4311>

Commit(s) tested:
	0e454242cc1527e49ad0ea795614ac94a083b68a

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Remove make_cleanup_restore_current_ui

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8f23213b822dc6a24762f8483554b357bd39ee09>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4310>

Commit(s) tested:
	8dddcb8f005e8470312bf33041bb6ddaa5084e32

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Record minimal symbols directly in reader.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=37206903c60ba6aaf17f1160f2ae0437b389d7de>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4307>

Commit(s) tested:
	4b6749b9a4680e79affdb9c02ea2f5ba39a54587

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use scoped_restore for current_ui

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e6a5d87094dc2eb0414ef2388c271e30a79d5e00>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4305>

Commit(s) tested:
	b7b633e9b13fc5697af035f4504c9790c612a8c7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use RAII to save and restore scalars

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=629af838652a14cc14bf05a3325a2bdf5faa9860>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4301>

Commit(s) tested:
	4db41a0a1097860d1e0d3b8ecf6c01dbbb65ba5a

Author(s) (in the same order as the commits):
	Philipp Rudo <prudo@linux.vnet.ibm.com>

Subject:
	Delete target_so_ops->special_symbol_handling hook

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ee4c37f41d26d93203c687fab1178047f7f5c8ab>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4300>

Commit(s) tested:
	9889cbb14ebea4b281408afcfd94ad6646ab370a

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Check invalid mask registers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fb5b92c34052e9d69efc574abde7b2668e96b35e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4299>

Commit(s) tested:
	f90fd8c2f17c7631915103ce5b760830a156ee93

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite: Fix gcc_compiled for gcc 6 & 7

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=503adc95da5668283cc317f4772ed52ca461aac6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4298>

Commit(s) tested:
	789b4e00353f554c69ded290564276742ee290db

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Regenerate bfd.pot.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=514fd1dc6107aba96b25bc0328be2225cd8fcf18>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4296>

Commit(s) tested:
	2d2476aac71fcafad6d1524733f0d88f2b53753b

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	testsuite: Fix gdb.base/killed-outside.exp using irrelevant stale options

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8294910a3424000a993617daef3d99346fa78faa>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4295>

Commit(s) tested:
	695344c018c8e462280c47a644df02ea472b0a4e

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Add c-format tags to translatable strings with more than one argument-using formatting token.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9fc06461541223f667ea894e8ee05f73a5f18c3d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4293>

Commit(s) tested:
	f6abaf7a4088dc9a5d73ee2233246347af9181d5

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: no longer define __STDC_CONSTANT_MACROS/__STDC_LIMIT_MACROS

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ac53bada7463ca8e8a44cbab4fab267b9695a101>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4292>

Commit(s) tested:
	49e4877c5487dc34edf414bb0f1125ce1b71e08b

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Update gnulib to current upstream master

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=48ca9109bbcc522a8869b03dca80f44dbd902811>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4288>

Commit(s) tested:
	b928b56ea67da30216b79abd6a87ffda99fc911d

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Updated Danish translation for the BFD library.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=77d62bf3a42a810be1ed3a2637cde25b028cc4a9>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4287>

Commit(s) tested:
	ae71e7b59836219c617193a263b17041d765a031

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	i386-tdep: Verify architecture before proceeding with `set/show mpx'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a77405e9e69ce8358f5975fafc00277c659f27d7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4286>

Commit(s) tested:
	b348d11b70068e7eabba6d8f99d4ad371c3f6253

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	tilegx-tdep: Correct aliasing errors in `tilegx_analyze_prologue'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=91c8ecd34fbddd36aec1e7f21f05edd480c28b00>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4283>

Commit(s) tested:
	c48182bfe408e06e3301ee887fd9a7b06bedff37

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	ARM/BFD: Correct an `index' global shadowing error

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8c9c803e08a92302c74b244e02877fb88a7cdece>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=a22e158>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=a22e158>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4279>

Commit(s) tested:
	e42b25a0407fbbf3529815f69bd56a61b1821295

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix duplicate test message in mi-trace-save.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f15005e762183fd084a6f46ae205365e7efe7753>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4278>

Commit(s) tested:
	3ccdb4324b0dc9fa46ee7cad9b370f8c7c370c3b

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix comment in mi-trace-save.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=dc3e2cf5b42134b58deb9855d5682f4f9088c3aa>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-jessie-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4276>

Commit(s) tested:
	5562a44eb490b5777c9e786971907c0727d88495

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Fix phony iconv build

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4aa5a83b680ec237acfa0635d70ede8509a89043>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4275>

Commit(s) tested:
	decf5bd1570be3de10aeab99869a9548d17b1354

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	Removed pseudo invalid instructions opcodes.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8e64b9bae62998a73642011cabd3cdd8c8b4fefc>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4274>

Commit(s) tested:
	6d91379408b87b6d0c1cd4bc2880b530cc4ec721

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Update list of ELF machine numbers.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=79ec9bb57f534bf18a486b9b6b50715c55fc87d8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4273>

Commit(s) tested:
	41f225defe891ff71d3c8a149cdc1ed8f3a64c5c

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Sync libiberty sources with gcc mainline.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=59da6281de06d351ce55359874ea9b524b273642>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.ada/interface.exp: print s
PASS -> FAIL: gdb.ada/iwide.exp: print s_access.all
PASS -> FAIL: gdb.ada/iwide.exp: print sp_access.all
PASS -> FAIL: gdb.ada/iwide.exp: print d_access.all
PASS -> FAIL: gdb.ada/iwide.exp: print dp_access.all
PASS -> FAIL: gdb.ada/ptype_tagged_param.exp: ptype s
PASS -> FAIL: gdb.ada/tagged_access.exp: ptype c.all
PASS -> FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
PASS -> FAIL: gdb.ada/tagged.exp: ptype obj
PASS -> FAIL: gdb.ada/tagged.exp: print obj
PASS -> FAIL: gdb.base/restore.exp: caller3 calls callee1; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller3 calls callee2; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller3 calls callee3; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller3 calls callee4; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller3 calls callee5; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller4 calls callee1; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller4 calls callee1; return restored l2 to 32493
PASS -> FAIL: gdb.base/restore.exp: caller4 calls callee2; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller4 calls callee2; return restored l2 to 32493
PASS -> FAIL: gdb.base/restore.exp: caller4 calls callee3; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller4 calls callee3; return restored l2 to 32493
PASS -> FAIL: gdb.base/restore.exp: caller4 calls callee4; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller4 calls callee4; return restored l2 to 32493
PASS -> FAIL: gdb.base/restore.exp: caller4 calls callee5; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller4 calls callee5; return restored l2 to 32493
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee1; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee1; return restored l2 to 32493
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee1; return restored l3 to 32494
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee2; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee2; return restored l2 to 32493
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee2; return restored l3 to 32494
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee3; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee3; return restored l2 to 32493
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee3; return restored l3 to 32494
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee4; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee4; return restored l2 to 32493
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee4; return restored l3 to 32494
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee5; return restored l1 to 32492
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee5; return restored l2 to 32493
PASS -> FAIL: gdb.base/restore.exp: caller5 calls callee5; return restored l3 to 32494
PASS -> FAIL: gdb.base/store.exp: var longest l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: var float l; print old l, expecting -1
PASS -> FAIL: gdb.base/store.exp: var float l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: var float l; setting l to 4
PASS -> FAIL: gdb.base/store.exp: var float l; print new l, expecting 4
PASS -> FAIL: gdb.base/store.exp: var float l; print incremented l, expecting 2
PASS -> FAIL: gdb.base/store.exp: var double l; print old l, expecting -1
PASS -> FAIL: gdb.base/store.exp: var double l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: var double l; setting l to 4
PASS -> FAIL: gdb.base/store.exp: var double l; print new l, expecting 4
PASS -> FAIL: gdb.base/store.exp: var double l; print incremented l, expecting 2
PASS -> FAIL: gdb.base/store.exp: var doublest l; print old l, expecting -1
PASS -> FAIL: gdb.base/store.exp: var doublest l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: var doublest l; setting l to 4
PASS -> FAIL: gdb.base/store.exp: var doublest l; print new l, expecting 4
PASS -> FAIL: gdb.base/store.exp: var doublest l; print incremented l, expecting 2
PASS -> FAIL: gdb.base/store.exp: upvar longest l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: upvar float l; print old l, expecting -1
PASS -> FAIL: gdb.base/store.exp: upvar float l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: upvar float l; set l to 4
PASS -> FAIL: gdb.base/store.exp: upvar float l; print new l, expecting 4
PASS -> FAIL: gdb.base/store.exp: upvar double l; print old l, expecting -1
PASS -> FAIL: gdb.base/store.exp: upvar double l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: upvar double l; set l to 4
PASS -> FAIL: gdb.base/store.exp: upvar double l; print new l, expecting 4
PASS -> FAIL: gdb.base/store.exp: upvar doublest l; print old l, expecting -1
PASS -> FAIL: gdb.base/store.exp: upvar doublest l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: upvar doublest l; set l to 4
PASS -> FAIL: gdb.base/store.exp: upvar doublest l; print new l, expecting 4
new FAIL: gdb.go/package.exp: setting breakpoint at package2.Foo
PASS -> FAIL: gdb.go/package.exp: Going to first breakpoint
PASS -> FAIL: gdb.python/py-finish-breakpoint2.exp: set FinishBP after the exception
PASS -> FAIL: gdb.python/py-finish-breakpoint2.exp: check FinishBreakpoint in catch
PASS -> FAIL: gdb.python/py-finish-breakpoint2.exp: check finish BP removal
PASS -> FAIL: gdb.python/py-finish-breakpoint2.exp: continue to second exception
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4272>

Commit(s) tested:
	b4f6af8ee2ea97b8c6f2bca1c2fd728683e68ef5

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	FINAL/OVERRIDE: Define to empty on g++ < 4.7

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=df6050a06e0bd9f7949aee62ad409d29d85669f7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4271>

Commit(s) tested:
	d118ee3761bcf0c861a75e454d0c2b741fccb956

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Move OVERRIDE/FINAL from gcc/coretypes.h to include/ansidecl.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=bccdbf582be371ad85f2e14d1b82c174836e373d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4270>

Commit(s) tested:
	754c39c2f32a796ad9983836deb7c4429c808e48

Author(s) (in the same order as the commits):
	Ulrich Weigand <ulrich.weigand@de.ibm.com>

Subject:
	Fix set sysroot command on AIX

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4ad22fa0d6e7d8afe471174aec3ba44f2f5fdf7b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4266>

Commit(s) tested:
	8ffc1bb12a22e548835c9291871ad0eb68b7f6f0

Author(s) (in the same order as the commits):
	Eli Zaretskii <eliz@gnu.org>

Subject:
	Include strings.h where available

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e26cc95c7c01421b00b1fe29cc64520a43f2d1fe>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4265>

Commit(s) tested:
	1f2e9c5e3b0ef55cb0ab180dd0c82c7954a73e1a

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	ARI: Remove true/false checks

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9dfa603835770c363176faa790cdcb241e60ba93>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4263>

Commit(s) tested:
	62df7e210ebf096dc09ad14d9316fcda0f6217f7

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Skip testing structures with floating points

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8b2705a31edfd49088e52dcbccb7df7402980164>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4262>

Commit(s) tested:
	af533a5f8b149bfa1394ab04c3947e97dd507a33

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use std::string in macho_symfile_read_all_oso

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=58b43882ec97e27cde9a454d96d8446769b7c5ef>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4261>

Commit(s) tested:
	d1a760cbb796b62f18ff6b81a189fd261809ef74

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Remove unnecessary null_cleanup

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3c86383518cb5de240fc775cfbba698252a832bc>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4260>

Commit(s) tested:
	cda6c55bd399a8892d62178d4daeb074def909e0

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Turn wchar iterator into a class

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f59979f04d1fca10405e0f6b84750c59e523cdcf>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4259>

Commit(s) tested:
	816d7b53047bca81c226990bc9248d59d80d4b8b

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Change selttest.c to use use std::vector

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=00b5ffd7bb9cc98cbb08eb88ea7093888d7aecbe>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4258>

Commit(s) tested:
	bfd282882d534cd4f48e2fc29d4ce0923c52352b

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Convert tid_range_parser and get_number_or_range to classes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d9718675177d1dff6a3185a8f231309ed1d2019f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4257>

Commit(s) tested:
	4dac951e11030b43b17f52df8bdfa7432e4bf73c

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	Fixup gdb.python/py-value.exp for bare-metal aarch64-elf

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6aa6252790588fedef6f9712b8efba315a99bd73>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4256>

Commit(s) tested:
	4a2f4826907de97b089295000a67d2497aa94c99

Author(s) (in the same order as the commits):
	Anton Kolesov <Anton.Kolesov@synopsys.com>

Subject:
	arc: Add support for Newlib

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=78d98eeee0be1b8687dbc7f6b254878c98b644fb>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4255>

Commit(s) tested:
	aaf43c4882f827d9f778b40dcdb93566f765f5f9

Author(s) (in the same order as the commits):
	Anton Kolesov <Anton.Kolesov@synopsys.com>

Subject:
	arc: Add evaluation of long jump targets

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=782f695042b3885cf04ebd6ae13c0e1581e6f090>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4252>

Commit(s) tested:
	187f5d00acf0ffe5390f282fd4d6285bcd6fccb9

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[AArch64] Track FP registers in prologue analyzer

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=dded6d49b7948163a9713c74bfd728759aadf602>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4250>

Commit(s) tested:
	8f1a8fc4df2244f548d55fbecce20b7cd6f90e16

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite: Fix gdb.arch/powerpc-prologue.c compilation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3bd44432698a7279cd11100a82617d4a13775820>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4249>

Commit(s) tested:
	16c85b5d14a04c275d3cb39b2029f3dc0f708531

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite: Use standard_output_file

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f2369eef90816259d48287d08ea93d3d81606276>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4248>

Commit(s) tested:
	93562a343c26f67d2bd0e93cceb18a0a793087c2

Author(s) (in the same order as the commits):
	Jiong Wang <jiong.wang@arm.com>

Subject:
	[AArch64] PR target/20666, fix wrong encoding of new introduced BFC pseudo

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4c535dcb57331a5c55232ca27612845e9b26c61e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4246>

Commit(s) tested:
	a1078bea751d48e8846b91542d91647f1e0aed8d

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Share enum arm_breakpoint_kinds

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1a86e28a9ca6b283b66af1cf4ee85c78515285af>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4245>

Commit(s) tested:
	97ce08cb8071bf9a8df6c99cdf8e9fbf1911f3f5

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Rename 'arch' by 'gdbarch' in m32c_gdbarch_init

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=810904441cf5d4761ebb9f590806acbf2d115627>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4244>

Commit(s) tested:
	ff12a6593a1675aa9ba5340aa2984af19cf8966c

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Remove v850_dbtrap_breakpoint_from_pc

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5f365b94c51965f6d54ecf800ced312dae7274f5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4243>

Commit(s) tested:
	49d06418ada11004ca1cdc0ec5847358e83fc67a

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	ui-out.c: Remove unused parameter to push_level

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3532bbd65e0b6ba5dc32913b32d1e2cafc280771>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4237>

Commit(s) tested:
	50e03d47b77d5730f96f6b6bb66187654e66c797

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Pass link_info to _bfd_merge_private_bfd_data

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9a1b2997b1ef525a02efb23351dd9157b5f0da89>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4236>

Commit(s) tested:
	1047201fd0f402428bb3331638a198413f97f476

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	bfd_merge_private_bfd_data tidy

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=cd11387fdb3ff8a9afbe67e59bf6c3f14728c40e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4235>

Commit(s) tested:
	1fb77080fd74d11c0dbccf812ed98ffa0b3edc4e

Author(s) (in the same order as the commits):
	Sergio Durigan Junior <sergiodj@redhat.com>

Subject:
	Consolidate API of target_supports_multi_process

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=420b174f0ee9b6a855e05424c5ef93d8e5ad982e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4234>

Commit(s) tested:
	ddb6d633875b76f9d772af901118233fc498253a

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove some C compiler support leftovers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4383fce4c3ee83ba60dcbf7ec7ceed3a149a4cdc>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4233>

Commit(s) tested:
	33fa2c6e1b1e63599156f7d79de8c0a6ea69c8af

Author(s) (in the same order as the commits):
	Doug Evans <dje@google.com>

Subject:
	Fix gdb.Value->python conversion for large unsigned ints.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2426507901b81535bf3f5b601f2d1ac6ac9d6ae8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4232>

Commit(s) tested:
	d73f9c4bab1a0ec82007f9d36b8a7bf5d34f7bf6

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	frame.h: Forward-declare struct ui_out

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=cf1fbeb3e1ad1a608b615c543859242984869433>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4226>

Commit(s) tested:
	78b86327b5301231005b08a7c589b2b58e6b4322

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	mips-tdep: Make FCRs always 32-bit

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0a3f1ddfb6d28350be23cb9219a139abdbce2b99>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4225>

Commit(s) tested:
	a6912260f813b1493efefd27cbcb6a73d933accc

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	mips-tdep: Rearrange comments in `mips_pseudo_register_type'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=bb26a43222d789e8851a80d88968d467a9e801e3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4224>

Commit(s) tested:
	7470adbb872d5363580eb5e0a8dbb231c286ee4c

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	testsuite: solib-disc: Use `standard_output_file'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9dd6743b543dd1a6161224e19850b58b0804d1f0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4222>

Commit(s) tested:
	c620c3e48d01e70c435c146905cab1a50382ce89

Author(s) (in the same order as the commits):
	Markus Metzger <markus.t.metzger@intel.com>

Subject:
	stack: fix gdb.dwarf2/dw2-undefined-ret-addr.exp regression

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6620585581a0f0a9458014ada545086a8e4b5319>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4219>

Commit(s) tested:
	4a556533cf0256613c412b9627fa8b8edfa7674a

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR11094: JIT breakpoint is not properly recreated on reruns

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=113564998c18e93e69de0a1a6d27fa8642cea73a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4218>

Commit(s) tested:
	5a122fbc307f35093b8fe038a8e6caa51b4d0dae

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix a few gdb.base/jit-simple.exp problems

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=26583e5daeb11fe6097d4e1c4bbead121f8d1968>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: attach
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4217>

Commit(s) tested:
	ee8da4b8396d9a74d27cb9bb0f3aa43d6d23b8ea

Author(s) (in the same order as the commits):
	Doug Evans <dje@google.com>

Subject:
	Make "end" field in feature specs required again.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d99ff79f19ef1d4c39190dca0b1536f5e8ab0154>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4216>

Commit(s) tested:
	1a0670f37442b7ae904932b347353046126b990c

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	-Wimplicit-fallthrough warning fixes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=99ef4db71f13395071bfe999c50c9d2458910176>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4215>

Commit(s) tested:
	2b804145796e948fa4c025c07eb201e700281e6b

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	-Wimplicit-fallthrough error fixes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=97af31208b450e3c5a9a9d063c7cc7362ff2d95f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4214>

Commit(s) tested:
	616ec3583b7b6ba0a4e581c426b700b0664a3027

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Don't use boolean OR in arithmetic expressions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=168b2293e9760f2f19b4b69957a0842904bc1b9c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4213>

Commit(s) tested:
	f389f6fef76d7cf8e8beb7061edff2155c284898

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite: Fix recent GCC FAIL: gdb.arch/i386-signal.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=885c67d32cba3b7bbb92ab7aca6b8b6fe918edc6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4212>

Commit(s) tested:
	39b5a3b9b3aadac723de719f3c27f8462ed49af7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	PR remote/20655 - small fix in handle_tracepoint_bkpts

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=95b5807d0ea4fb33021c661de4885f22ddbf4a61>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4210>

Commit(s) tested:
	3e611445bf05fa20e0befa41afa42651d1983734

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	PR symtab/20652 - fix psymbol_compare

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=df5c93cf3361bbbea5bbf10499a0ade68aee3462>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4209>

Commit(s) tested:
	fdebf1a415f565fc4606f9139d10d1e9393999c0

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Skip complex types tests if gdb_skip_float_test

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9cca8b0b907a8740997930d6368e89d5e6d49f19>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4207>

Commit(s) tested:
	ed2f09e183df513e9616c53cdace32cf8b824b98

Author(s) (in the same order as the commits):
	Anton Kolesov <Anton.Kolesov@synopsys.com>

Subject:
	arc: Remove annoying debug message

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b1f2a4cccb884e729fcf58af0e1d3a1229ba11df>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4206>

Commit(s) tested:
	c1d0b70ae517512a77eed778c6dd7d8a941962fc

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Update the path arm-*.xml files for aarch64

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d6fe071f7d68d22559b2c5abbcc85b998146f522>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4205>

Commit(s) tested:
	5878efd48016e091cb19dc09345cd7f73d791c6f

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Regenerate some regformats/rs6000/*.dat files

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=dde27464f129d23d7c7c2e81adf20bd7236463d1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4203>

Commit(s) tested:
	414c838a722efedb0f787b64629db13d88c9ef7c

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Simplify i386, amd64 and x32 expedite registers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9b698a7ecea7bf8aa16ef07e6b46977ba659a108>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4202>

Commit(s) tested:
	0a69eedb6d7c1c90ec7888a857c4d7c0a1fd1b31

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Clean up the XML files for ARM

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f19d0651e563a44fc29e36dfc2301620a7e7b411>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4198>

Commit(s) tested:
	9c36d9544f0987cbd840a19552af3343252d28a0

Author(s) (in the same order as the commits):
	Antoine Tremblay <antoine.tremblay@ericsson.com>

Subject:
	Add test for user context selection sync

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=165e049b0bb319c7c266a12efd20e30e599726a2>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4197>

Commit(s) tested:
	4034d0ff52b0f346efedd2d335ccbc672466da45

Author(s) (in the same order as the commits):
	Antoine Tremblay <antoine.tremblay@ericsson.com>

Subject:
	Emit inferior, thread and frame selection events to all UIs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8a7f3bbbeece3d1e3c40a717f88cfbf2a9f8537c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4194>

Commit(s) tested:
	92c6e4fe5d6f30a24fe15795a6a3b25afd0b24c9

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Add missing dependencies to BFD_H_FILES

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=288d96437930a8029a61f09c65699cd85cd6a8b5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4192>

Commit(s) tested:
	4eca02287cf48e60ee89338ddd35f8d0d8257a51

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Remove syntactic sugar

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7ceb1ac6118d40f9fd264bde7abf5b9d7a8840de>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4190>

Commit(s) tested:
	a4297203ea1a1e4664b6f2b05efecd60f6437f46

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Update tests to account for the L operand being compulsory.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=37acd7831aaaf4870d67f871c10910384e15a2cf>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4188>

Commit(s) tested:
	bb805577d2b212411fb7b0a2d01644567fac4e8d

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	PR gdb/20609 - attach of JIT-debug-enabled inf 7.11.1 regression

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f4172c498efe0d8d9572d692987c53a213f72eac>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4185>

Commit(s) tested:
	6d61dee599fb314f0561c3bd0dd17ac0cfa05e35

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR 20345 - call_function_by_hand_dummy: Assertion `tp->thread_fsm == &sm->thread_fsm' failed

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d8ff4382673152c511b5e8871eb86d0cbd9e4cbf>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4184>

Commit(s) tested:
	9eaff8613893f063400fdae95bc382ab33685e3b

Author(s) (in the same order as the commits):
	Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>

Subject:
	Fix seg-fault in the linker introduced by the previous delta.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e29f3b20444571552d0cf1c79b8de71339a0958e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4183>

Commit(s) tested:
	2df2751d1927e1231bbe7d548139da98d6ca9b9a

Author(s) (in the same order as the commits):
	Christophe Lyon <christophe.lyon@linaro.org>

Subject:
	[ARM] PR ld/20608 Relocation truncated to fit: R_ARM_THM_JUMP24 for relocation to PLT entry

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0a85fde206dcbd85c73d4cc189bd901f28cc5870>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4182>

Commit(s) tested:
	07619d52fef6fda58cbc327512a4d8ec60ad5637

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Add archives and make stamps to the .gitignore file.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7f540df35936c0b8260f6d7e3bc3ca93d301ba95>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4181>

Commit(s) tested:
	1c5f704fc035bc705dee887418f42cb8bca24b5d

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Ensure that the timestamp in PE/COFF headers is always initialised.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7bebfd15d1e00f9829d040e2ddb7b2ccb6fa6963>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4179>

Commit(s) tested:
	ca90e76046d302a730629ecf39b425a8aaa590c2

Author(s) (in the same order as the commits):
	Fredrik Hederstierna <fredrik.hederstierna@verisure.com>

Subject:
	Detect the magic address of EXC_RETURN in ARM coretx-m profile

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=51368805939967fd5a3203fc3637ab98e59d1104>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4177>

Commit(s) tested:
	384f7503344b1d07561f801ced7493858cde6164

Author(s) (in the same order as the commits):
	Awson <kyrab@mail.ru>

Subject:
	Fix the calculation of AMD64_PCRQUAD relocations.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=370f001a6161d71bbc995fb96d255aaf5bdbd425>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4176>

Commit(s) tested:
	2b848ebdbb2d1f856c7525ed4d6efaf6fe70de81

Author(s) (in the same order as the commits):
	Claudiu Zissulescu <claziss@synopsys.com>

Subject:
	[ARC] ISA alignment.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=250531b792eed8632dc8938b5fd9da29b424ef5c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4175>

Commit(s) tested:
	005d79fd6101dae0aaf62a1b0cee399efcbd0e21

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	PowerPC .gnu.attributes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6cd52a75c14842f5dcd7df6b255b56acea8d0722>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4174>

Commit(s) tested:
	edeeb6024373d865284903f0b96b9811afde0441

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Call debug_exit in linux_wait_1

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=13174726e840198a514f0627e20a7156f756ec8e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4173>

Commit(s) tested:
	9eee20eb5400345cab1952cbfc0426035ddf1140

Author(s) (in the same order as the commits):
	Jon Turney <jon.turney@dronecode.org.uk>

Subject:
	Fix a use of target_mourn_inferior in windows-nat.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1ba8ae25ee1dad217d8e5eebee963b6d58406f69>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4172>

Commit(s) tested:
	a97e29d248d51bb688cff677def657eb0cf82cca

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use std::string rather than dyn-string

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=726fa8154279e51a00ec9d357e94bdc3ba568853>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4171>

Commit(s) tested:
	cfe826d45ea2e15f0df4c039dfa4b9ea605831da

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use std::vector in objfiles.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d6494f377a2350dcadb0d3a05092f59dd0412a8a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/sigstep.exp: displaced=off: stepi on breakpoint, skip handler, with sw-watchpoint, no handler: watch $convenience
PASS -> FAIL: gdb.cp/annota3.exp: first run until main breakpoint
PASS -> FAIL: gdb.cp/annota3.exp: print class
PASS -> FAIL: gdb.cp/annota3.exp: continue to exit
PASS -> FAIL: gdb.cp/annota3.exp: delete bps
PASS -> FAIL: gdb.cp/annota3.exp: break at main
PASS -> FAIL: gdb.cp/annota3.exp: second run until main breakpoint
PASS -> FAIL: gdb.cp/annota3.exp: set watch on a.x
PASS -> FAIL: gdb.cp/annota3.exp: watch triggered on a.x
PASS -> FAIL: gdb.cp/annota3.exp: annotate-quit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4170>

Commit(s) tested:
	ab8b80a88546eacb6e75004e8dd571e6bdf9505f

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use std::string, std::vector in rust-lang.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=733c0fbcca35c08fb7b9660b915d8b1911497f8f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4169>

Commit(s) tested:
	05d49c372d4689f8ca8baf4fdd32529ac40f297a

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use std::string in cp-namespace.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=28a48061556b6d651f2439167922268f97c86ef6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4168>

Commit(s) tested:
	5809899dad253e2fefcb6f7ae57a6f43cfa4e3c5

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use std::string in break-catch-sig.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4da74d4cd68f940a097a956c8d82bfcc42032f39>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4167>

Commit(s) tested:
	3e25a500a1ba05587389737e7c617e5ae6dd2bcf

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Remove some unnecessary code

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5253b1df18d20606584fb106849d818f6ef92217>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4166>

Commit(s) tested:
	97e64e5ab19dbf6a9babd711e8deec5545520954

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Replace sprintf with xsnprintf in nat/linux-osdata.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d52b830831ea798b2fa6339b5af8f90046fea5ef>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4165>

Commit(s) tested:
	503b1c39dc801389f7ae510fb1f7ee1e533b67ac

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Replace operator new / operator new[]

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=43212514aab2c158b57ae5915800f4158be6fcfb>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4164>

Commit(s) tested:
	5025eb7c0d87b01507116353b5d63b163d7add3d

Author(s) (in the same order as the commits):
	Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>

Subject:
	Delete relocations associatesd with deleted exidx entries.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b612ec052f6d119675dcc5eda74eefc4de18ddfe>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4163>

Commit(s) tested:
	f73842fc847e297fd44542de9601a84b4d6b28d8

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Close gdbserver in mi_gdb_exit

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2108a64e8b2ddbb85ffdee6b300a1cb5d2533e7c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4162>

Commit(s) tested:
	de6784544abc97d5e396cb1e83eda1ae09f63d40

Author(s) (in the same order as the commits):
	Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>

Subject:
	Fix build breakage from commit 6ec2b2

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6ac29a209b0958968a3aa6d174297b3b83cd74d1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4152>

Commit(s) tested:
	ad43e107eb233dcef8e76da6328aa4e4d74afd84

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64] Print spaces after commas in addresses

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b3e8dc0ed9a836255736616e4f1c264742d857fe>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4151>

Commit(s) tested:
	ab3b8fcfdb06695d27eaec4eedb019ada4a5713e

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64] Use "must" rather than "should" in error messages

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d987a40c3ffc30bac43fea81db579fd81057414f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4150>

Commit(s) tested:
	bb7eff5206e4795ac79c177a80fe9f4630aaf730

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64] Add SVE condition codes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5468befb2abcee397d5757d7faa9602485406eea>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: no thread starvation
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4148>

Commit(s) tested:
	116b60193779ac65a29fb3688b753527980cb3e7

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 30/32] Add SVE instruction classes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=00ba41cf399461e1d4465169e25f728943f8e9ee>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4146>

Commit(s) tested:
	165d4950855493dd904a7996e7fcf58880d54219

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 28/32] Add SVE FP immediate operands

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ab232e4ef5a5854af42aa2c875c5b65d78c82801>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4145>

Commit(s) tested:
	e950b3453948830c5ce9c2f70d114d0b38a4b4ac

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 27/32] Add SVE integer immediate operands

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a7560dcead48dfb5c092d521a57a9c58fd9f49ac>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4144>

Commit(s) tested:
	98907a704908c5877d929c57b2ddb2e5f899d9a9

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 26/32] Add SVE MUL VL addressing modes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3c52b36e19228a35b8cbafe10f7455443c168381>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4142>

Commit(s) tested:
	2442d8466e221ba6cf4ec4bd2a819fdcb1e5ea7e

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 24/32] Add AARCH64_OPND_SVE_PATTERN_SCALED

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d85221c7c8d0d8f5f2d9fd257d08ec514996e62e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4141>

Commit(s) tested:
	245d2e3fe8d9ff35c65ed1329609fb7e59034877

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 23/32] Add SVE pattern and prfop operands

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=06c46cf8cea02b1882b3086273e47651f8f29947>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4140>

Commit(s) tested:
	d50c751e00b5336b4604b92271ab84615fdb0d27

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 22/32] Add qualifiers for merging and zeroing predication

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e811be2f9f3797d250656e92f3bbbf3e4cc784e1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4139>

Commit(s) tested:
	f11ad6bc0fc44b94c6970115bb6984b497b967e7

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 21/32] Add Zn and Pn registers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e9cea33313560dd9ddab3484ae6fbfdd69e0a4a5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4138>

Commit(s) tested:
	0c608d6b62f9164203685ab125b4b3ad113eb26e

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 20/32] Add support for tied operands

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=54e9aff6ee3ff5afcb3df6e82b443450d4de18ce>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4137>

Commit(s) tested:
	01dbfe4c0e2b832c6b1076e8d373b162e2faa376

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 19/32] Refactor address-printing code

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=753d67fa48e6550bde5974d7edfbb3e6a9a0f174>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4136>

Commit(s) tested:
	72e9f31937f063ed6f5991a2b8c00068fa2dc8fc

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 18/32] Tidy definition of aarch64-opc.c:int_reg

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0d1b9a8977d33d695bb896f543d5af434311bc6b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4135>

Commit(s) tested:
	8a7f0c1b5ae35d041886855ac7ca9b9533e8788a

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 17/32] Add a prefix parameter to print_register_list

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=85ed6d585257298705abe5f68d984f381c9fe590>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4133>

Commit(s) tested:
	b5464a6825e40e6d8ab2dd86c7ff5d65bedd64d4

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 15/32] Add {insert,extract}_all_fields helpers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fe74bc7e892c91eed823469534e4dd03b7dca90b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4132>

Commit(s) tested:
	42408347b86745fdbd4bec9ee3a6a3fee31c4dee

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 14/32] Make aarch64_logical_immediate_p take an element size

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5348abe9635b22d963ac8e0e1bb1f88e358524d6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4131>

Commit(s) tested:
	4989adac848eb8f2fee8b98d9615d2fded22623b

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 13/32] Add an F_STRICT flag

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1ecbbad888ddbd1925d9173bf01c4f09ac805920>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4130>

Commit(s) tested:
	bd11d5d83775e6d05c8e49f2233fb1cf883ff5b4

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64][SVE 02/32] Avoid hard-coded limit in indented_print

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d2250148919075601dfc1e50c19b6ae000db5c48>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4129>

Commit(s) tested:
	3d0ec882241884d0cabb27f8fee1262dbc7cf9e7

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/testsuite: mips16-thunks: Use `standard_output_file'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a5d24d9b75c1b44f4acaaab3836e2742652f9b04>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4127>

Commit(s) tested:
	fc6cda2ee85d2c2719db3b5ae3a1ae963f28416b

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Keep reserved bits in CPSR on write

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3c4380ea2d0708f4d313792f2a383936135fff73>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4124>

Commit(s) tested:
	9f7efd5bf76aa5065298d13aefb109ecfd7a825a

Author(s) (in the same order as the commits):
	Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>

Subject:
	ppc: Fix record support of Store String Word instructions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f3299633fba5a625e5717a8f86c87130c652475b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4123>

Commit(s) tested:
	7d5adfe3118050243e85469ad891c7813e4db68a

Author(s) (in the same order as the commits):
	Sergio Durigan Junior <sergiodj@redhat.com>

Subject:
	Use 'event_ptid' instead of 'resume_ptid' on startup_inferior (fix for regression on my last commit)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2d2e2966a2161dbca660805f2859957d6f8207a3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4122>

Commit(s) tested:
	6679754127e51d9c3bd0e387fabbe4e71038c8ce

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Fix build breakage with GCC 4.1 and --disable-nls

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7feda27b43133fcfbd93ae4165a9239572c8f82f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4120>

Commit(s) tested:
	bc1e6c81d5b77d78282c47f6fd7f697e564a6eb6

Author(s) (in the same order as the commits):
	Sergio Durigan Junior <sergiodj@redhat.com>

Subject:
	Consolidate target_mourn_inferior between GDB and gdbserver

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8c9b669505026ff979d62698645532b88915f0a2>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=main: force-fail=1: run failure detected
PASS -> FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=separate: force-fail=1: run failure detected
PASS -> FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=main: force-fail=1: run failure detected
PASS -> FAIL: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=1: run failure detected
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4119>

Commit(s) tested:
	93689493b376c4e5616c1679733619f96202c369

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb/s390: Fix build breakage due to std::min/std::max usage without header

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8b709f605f6a3e8783c0fb87339f8894601e4a94>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4118>

Commit(s) tested:
	768adc05c44c7e8b5c0f9ca5ad3ca96657715293

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Fix std::{min, max}-related build breakage on 32-bit hosts

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=17da20bd07b218476d1da2989f4472405dcc8542>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4113>

Commit(s) tested:
	8193adea2f86e37423a5d0acffb69b80bde05d52

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	S390: Hardware breakpoint support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8c04e9f3a752d060a911e9ccb95904c2b80bd2e8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4112>

Commit(s) tested:
	0e00e962c57138f0dd8c261cbd6918782deec3c4

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	linux-nat: Add function lwp_is_stepping

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7e8bd1837383cbc51ea54eeec3166389747b440f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4110>

Commit(s) tested:
	373c3dad74da78c46bc1fe4280a26d07e5b54cdd

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	S390: Multi-inferior watchpoint support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d634f6923f6fe8f110838c28882edb5ccfb2f3f4>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4109>

Commit(s) tested:
	17c84ccaf042dfb7dd81e4670b74768fe5a96017

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	S390: Migrate watch areas from list to VEC type

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b6f657a36fb163bb1b0787c775fd252def91477e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4107>

Commit(s) tested:
	d41a5c096ec613f7df33d5d5ea4c0e512ac1e87a

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite: Fix false FAIL in gdb.cp/casts.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6e5d32cc109bb64a66ce59ec7e0c7b2b409edb85>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4106>

Commit(s) tested:
	f807f43d7eba5bba3042554f9b3e884d71a68309

Author(s) (in the same order as the commits):
	Claudiu Zissulescu <claziss@synopsys.com>

Subject:
	[ARC] Disassemble correctly extension instructions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=02461f87ff59d175ab70ae5d50146d31c18a109b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4105>

Commit(s) tested:
	d2dfe7003423d41394d2475680e55af796566b8e

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite: Fix C++11 compilation failure for gdb.cp/m-static.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6ffcbf0fe7325a025091ba7753da34df2242c164>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4103>

Commit(s) tested:
	49b4de64242d4ae035e0e2197837278e33c187fc

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite: Disable ccache

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f5153510d78cefbdef5888a64e9318966cc8cbf3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4102>

Commit(s) tested:
	fd486b633e87f8ab2977592d56a6d98168814e2e

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Modify POWER9 support to match final ISA 3.0 documentation.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=bbd6972485338f347d76ef2d5388789396bcaa12>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4101>

Commit(s) tested:
	4f90d84b2f2995829d6af475077598d45ef1d127

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Fix ld --gc-section segfault with ARMv8-M entry function in absolute section

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fe6e7a355f27a25a146f65b66fc1ac8b2f5caef6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4099>

Commit(s) tested:
	5d9bbb73c1df68741048c3d0f837b50c289ea608

Author(s) (in the same order as the commits):
	Bhushan Attarde <bhushan.attarde@imgtec.com>

Subject:
	Prevent segfault in GDB when searching for architecture matches.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=03e49bcf6b46f1bf3f0b9af9ebc26ea0ae6dca1b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4098>

Commit(s) tested:
	dce084426d75b45ef728425a880d642a604c36a7

Author(s) (in the same order as the commits):
	Anton Kolesov <Anton.Kolesov@synopsys.com>

Subject:
	Stop the ARC disassembler from seg-faulting if initialised without a BFD present.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d4bc945e01c06a27f79134b79614eb510c3532e0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4097>

Commit(s) tested:
	1d8cb77dff14d44b1e3b670442438da496f99c6e

Author(s) (in the same order as the commits):
	Carl E. Love <carll@oc4738070240.ibm.com>

Subject:
	Fix for gdb.server/non-existing-program.exp test case

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=71ad5ca1d4a8de0eb9c2029b4b34433d053b40c6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4096>

Commit(s) tested:
	7313bced5b695b71a707c82b6817763046e21bb1

Author(s) (in the same order as the commits):
	Carl E. Love <carll@oc4738070240.ibm.com>

Subject:
	Fix for gdb.server/non-existing-program.exp test case

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ca3ea6b384874038ee5407d3392fb5670236d2da>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4095>

Commit(s) tested:
	952c3f51ac994f5e98aa829076609124cf9e5243

Author(s) (in the same order as the commits):
	Andreas Krebbel <krebbel@linux.vnet.ibm.com>

Subject:
	S/390: Add alternate processor names.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1a93bf098a933277659422b66270524cf5ec24c4>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4094>

Commit(s) tested:
	8b71537b6be5d66d6b6cf1273f7acab0621adfc5

Author(s) (in the same order as the commits):
	Patrick Steuer <steuer@linux.vnet.ibm.com>

Subject:
	S/390: Fix kmctr instruction type.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=76675aa00a7f50895f4937e25471f765da0494b0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4093>

Commit(s) tested:
	2c29df25b7c2ff006b45afd80ee6dd734ebbd47c

Author(s) (in the same order as the commits):
	Sergio Durigan Junior <sergiodj@redhat.com>

Subject:
	Fix false FAIL on gdb.base/stap-probe.exp, due to ICF optimization

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=85a77c01d5253913f4e9557f8cd060d339fbca74>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4092>

Commit(s) tested:
	cc3c284619d0482506f532cc8c1b00018fe14136

Author(s) (in the same order as the commits):
	Jon Beniston <jon@beniston.com>

Subject:
	Use target_sim_options for sim target.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=da58a193cffd2061357de62c406f88192e3d0c37>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4091>

Commit(s) tested:
	e1b2624a08fae1f669d879946d5041945b4dc248

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	Pass HWCAP to ifunc resolver

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3f64dcf219b2c58c79ab3b612db2ad8f5cc91df1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4090>

Commit(s) tested:
	f5c4fcd9712f516e2b5cfb8ad2464f0d5dfcc61b

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Remove some unneeded casts from remote.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fd3cc3926de4d4c352f113f4899e1d8c25dfc921>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4088>

Commit(s) tested:
	27e5a270962fb92c07e7d476966ba380fa3bb68e

Author(s) (in the same order as the commits):
	Richard Earnshaw <Richard.Earnshaw@arm.com>

Subject:
	[arm] Automatically enable CRC instructions on supported ARMv8-A CPUs.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7ed4d68441ec0b53defcf72e02eb845185882191>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4087>

Commit(s) tested:
	4295e285efa8193504ee08b9f633d9f8680bf181

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	new-ui command: gdb internal errors if input is already pending

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e9d619524847d308a1901f0f971930f37dc98529>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4086>

Commit(s) tested:
	a025b477cc466112af0b120c5f2bf5d62a62017e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Introduce make_cleanup_restore_current_ui

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c733c46480b7c1f23a97b4aa8858dd5605d16e9c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4083>

Commit(s) tested:
	d8457a04b71cbd642a00352dce0539fe1fe22dd4

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Resolve size relocation with copy relocation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f03cf4008bb4750cf0f6ac971da7e880633433ba>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4082>

Commit(s) tested:
	00d5215ecec4fa0a78dcc37fec9425593753eb66

Author(s) (in the same order as the commits):
	Ulrich Weigand <ulrich.weigand@de.ibm.com>

Subject:
	Support 128-bit IEEE floating-point types on Intel and Power

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=85f8dcdca05bfc3c1933155ed16b220353636b6c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4080>

Commit(s) tested:
	49f190bcb7f074ea2e27d4e967e4fae9ed7dafb6

Author(s) (in the same order as the commits):
	Ulrich Weigand <ulrich.weigand@de.ibm.com>

Subject:
	Add missing format for built-in floating-point types

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fa8aa184d6a9da10240b47ad64218e983a6548ad>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4079>

Commit(s) tested:
	c413c44801e449f1f0b9828b81770e752b8219af

Author(s) (in the same order as the commits):
	Ulrich Weigand <ulrich.weigand@de.ibm.com>

Subject:
	Remove TYPE_NOSIGN "char" hack

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=70b2c950f7c9fb9dac4112dec9ea9213e1bd336e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4078>

Commit(s) tested:
	a9ff5f12cff6cd06f74ecf387ac5468984c94c6f

Author(s) (in the same order as the commits):
	Ulrich Weigand <ulrich.weigand@de.ibm.com>

Subject:
	Remove obsolete TYPE_FLAG_... values

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d35805fa8a0cb4ea751ca08bd124313f71d2339c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4076>

Commit(s) tested:
	88dfca6c43c11dea69db24cfb87e6821e63e29b2

Author(s) (in the same order as the commits):
	Ulrich Weigand <ulrich.weigand@de.ibm.com>

Subject:
	Add some missing arch_..._type helpers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1654f403f41f6135c698e00257dd83e6f860dfa9>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4075>

Commit(s) tested:
	ae438bc5c06b770c00f37e4ed244707ce3ab9ff4

Author(s) (in the same order as the commits):
	Ulrich Weigand <ulrich.weigand@de.ibm.com>

Subject:
	Fix TYPE_SPECIFIC_FIELD for types created via arch_type

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1527c38c5aaf251f5312e966315f5eca8101f017>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4074>

Commit(s) tested:
	5f3bceb68dd211be977eb61d5f1ea68e7de51b7a

Author(s) (in the same order as the commits):
	Ulrich Weigand <ulrich.weigand@de.ibm.com>

Subject:
	Fix typo in ada_language_arch_info

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=cd5bedd0385e155f7af1ce045c70a42c0f0df848>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4072>

Commit(s) tested:
	cf6de44d75082116865a85cbf94db2632b679361

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb/: Require a C++ compiler

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6e0a928044ecbf56d5cebf181c5308e9b31cee8a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4071>

Commit(s) tested:
	f245535cf583ae4ca13b10d47b3c7d3334593ece

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR19927: Avoid unwinder recursion if sniffer uses calls parse_and_eval

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8682be696e6e80e659dc3584dc1a3ba534d86481>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4070>

Commit(s) tested:
	c1da6748f560ec19173d5d7766e0d497e8a0f1e4

Author(s) (in the same order as the commits):
	Akash Trehan <akash.trehan123@gmail.com>

Subject:
	Removed redundant line remote-utils.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a1cdb435d9c8191d09a5fd03a41a2a8add23370f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4069>

Commit(s) tested:
	4aa4e28bdcf5f0d733def62b542fea11d5f219d5

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Handle DW_OP_form_tls_address

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b023ee0727e9ab26b346765264d8121afc05508b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4068>

Commit(s) tested:
	3b9a79ef767f0e7f8c5fecd7eea920f20084d3d4

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[GDBserver] Replace "reinsert_breakpoint" with "single_step_breakpoint"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a04f33262afe6accdba91f37855036543e6a78a8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-nonstop.exp: probe for target remote
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4067>

Commit(s) tested:
	ae9cf263fdd47c30b997fcf4627609df77ca64c1

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Skip floating point tests in return-nodebug.exp if gdb_skip_float_test is true

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6a33369ea71f3376ae432304a0a893854523b32f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4066>

Commit(s) tested:
	27aba0477a4818fd760accd5b29a210d0ade2f42

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Detect broken ptrace in gdb_skip_float_test

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2107dd0f8adbf748bfa6d124d91d74676570923d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4065>

Commit(s) tested:
	f2b9e3dfd4bc3c5149496fdbeaa5f0907220685f

Author(s) (in the same order as the commits):
	Sergio Durigan Junior <sergiodj@redhat.com>

Subject:
	Share target_wait prototype between GDB and gdbserver

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fd03162e5048d9b0ee60c3f9cc274327597605db>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4064>

Commit(s) tested:
	049a857091cff98371b5688140832a3cf767153c

Author(s) (in the same order as the commits):
	Sergio Durigan Junior <sergiodj@redhat.com>

Subject:
	Use target_continue{,_no_signal} instead of target_resume

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9cf9bb74f21c1b9c8d781a95ac4e759f7c4f518e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4063>

Commit(s) tested:
	424844864aa6f49c616b3bb74a0a5ba9bcb92e72

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	2016-09-01  Thomas Preud'homme  <thomas.preudhomme@arm.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9cecd5eb0f49f5690f07d77948351f2463022b92>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4062>

Commit(s) tested:
	cd285db582fb1bd59db01e3dc29511d08999d05b

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Don't treat .opd section specially when ELFv2

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e0b6a2a998f58d1e8b4f6437cd9f47f24777fbfe>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4060>

Commit(s) tested:
	3aa5cfa0d1cdbbd839884302535da28ca8c8b00d

Author(s) (in the same order as the commits):
	Antoine Tremblay <antoine.tremblay@ericsson.com>

Subject:
	Fix lwp_suspend/unsuspend imbalance in linux_wait_1

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=03aeb09441c71a0d1007e564324e8e95bf7064f6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4059>

Commit(s) tested:
	f99bd5f2c1e6b545a0a6cfb3b13f79deea84098e

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Fix a typo in comment

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4bcb0baa1e0965eec6d927495b35d684db9afa9e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4057>

Commit(s) tested:
	f7d69005fb97f0d90c9eb414944a5035bfd67b36

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	PowerPC VLE sh_flags and p_flags

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=129b2ef24918290ed24c7699c4bc665a3d5b5b89>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4055>

Commit(s) tested:
	7763838e991e4d17a24c4214db5144eefd515543

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	Fixed issue with NULL pointer access on header var.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2bc1da9e47979a22de1df7d8684609a66d1aa75c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4054>

Commit(s) tested:
	5af962df4dda65216b83d0a954ea355296517f4b

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	Fix order of inferiors in "thread apply all"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0681e6afed21657dc0033fb232cec66da81d9ef3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4053>

Commit(s) tested:
	8941017bc0226b60ce306d5271df15820ce66a53

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	ppc apuinfo for spe parsed incorrectly

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=979dc618dff58eab59b82c8d77fa10fdcec3a2b7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4052>

Commit(s) tested:
	74437ea28fb611d4c88077b486fd7c0a8b4c2a25

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	i386: Issue an error on non-PIC call to IFUNC in PIC object

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=28fd7f99c78df40ce4048d0c38533c94c6d70e35>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4050>

Commit(s) tested:
	7fac69100a7c1fb52b2e044294a858272bad4e46

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	gdb.base/default.exp regression

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=69d1cb33b37df40c8a5925d40afa5a656aa84ad7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4049>

Commit(s) tested:
	53720c495c7c25f9b0f4bfce3269c6c8a7696522

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Lack of SHF_GROUP sections result in ld segfault

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d46503454938e72e65e8fc685fbde5017f300a2a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4048>

Commit(s) tested:
	8a9e8e72fe88095043d16f8a56b5a1e150ee288b

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Fix commit 980aa3e6

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c385d70372ab768ac1135a0e54c7324a09497ca0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4047>

Commit(s) tested:
	1b8b65328f8825444a7370a7817f2802b0e1a7c9

Author(s) (in the same order as the commits):
	Jose E. Marchesi <jose.marchesi@oracle.com>

Subject:
	opcodes, gas: fix mnemonic of sparc camellia_fl

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4a5308ed2057a86af0b2e5d71460ab352fb7d190>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4046>

Commit(s) tested:
	68c398921742291719d97f803891b5113874a22b

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Reduce parameter list in bfd_elf32_arm_target_relocs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f3e055a28d736758db0b5e1307e5796dc126fc6c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4044>

Commit(s) tested:
	c2abbbebcccf6c9403f8d6327e3fe3655acffbc1

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	2016-08-26  Thomas Preud'homme  <thomas.preudhomme@arm.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=397e188d47ac650e60b7a2aeb13a0ea57aa3b24e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4043>

Commit(s) tested:
	1a336194b70b712074a3f5479a01cc221003a152

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Add missing ARMv8-M special registers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2d9d5f0a0c2e2cdbdef19e588bfc53703bc1b547>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4042>

Commit(s) tested:
	980aa3e6dfeb0f018915f65be4b2987667f31fe9

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	Dynamic TLS GOT entries would not be relocated.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=04a3ea3fa8bd8700ecdcde48fcb6ca67f8c95944>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4041>

Commit(s) tested:
	65b94e90977efe3235381708f5a3e0d541026d88

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	Fixed -init, -fini linker options.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=996722b22e1e7a67fedf3c8db7de92495f7120f1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4040>

Commit(s) tested:
	8a36df4dcfa3cb89779e1a3eaca8067426e9cad6

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	Several fixes related to ARC PIE support.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=52274e018d2cc0a56d64c91b67c8efd9d50e812a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4039>

Commit(s) tested:
	4dd72ffdfe254fec30fd5eab0c5fd4445df73529

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	Content for TLS_IE_GOT not written to .got.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=39acfdb4585a89244ce2ec1a08bf7c74b7cb01de>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4038>

Commit(s) tested:
	a87aa054a67e23faeead400bdf902a1eddb242a4

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	Fixes to legacy ARC relocations.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=75c1c9ba910c9b384639c65d1e487bf3374790ff>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4037>

Commit(s) tested:
	0955507f6e7144c9c5e420bbcf617593b13de38b

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Add support for stable secure gateway veneers addresses

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0131ee05c35f00fc68568f2000d5506c49c96e58>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4035>

Commit(s) tested:
	ceada89664de30158de12d3d8f7bd7880ff6af29

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	S390: Indentation fixes in elf32/64-s390.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=33bfb1311413ab37b2a23601553373361f40340d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4034>

Commit(s) tested:
	ae68ff9f280902d9cead28b90979e75dc046492e

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	xtensa: Avoid designated inits, for C++ compliance

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7ed7c23d00c9c903ac85638173b8a876edbd39d2>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4031>

Commit(s) tested:
	754653a7c0a43a668a38aa30c4063b9e292a19f9

Author(s) (in the same order as the commits):
	Adhemerval Zanella <adhemerval.zanella@linaro.org>

Subject:
	Sync proc_service definition with GLIBC

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f2a1382dff421a64641018cf50b600fe7b1cfe9a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4030>

Commit(s) tested:
	6b40c462310066612636ec7434645ec7b46ff135

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	X86: Add ptwrite instruction

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=683da1f266fd2314dc9415b075e4153e40c6c166>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4029>

Commit(s) tested:
	bb1fe4acb8927fc4d451402f3f5fc245144c987e

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Test case to detect recursive unwinding in Python-based unwinders.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2360e2d0cf319efa47a33d5cafc71a2e52b115f2>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4026>

Commit(s) tested:
	0a1ddfa6b67201bb06f51fb47b56096e81bec5c0

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Allow resetting an empty inferior-tty

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9ce39428b004adbd54f6e11a03621447e18ef68e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/default.exp: tty
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4025>

Commit(s) tested:
	bdd78711b4c1ae26dbc8c2a64f28abec3486ae6c

Author(s) (in the same order as the commits):
	Carl E. Love <carll@oc4738070240.ibm.com>

Subject:
	Fix for gdb.base/pc-fp.exp.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f52a19f44b6294cbcacefdd24f6d95e610701760>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4023>

Commit(s) tested:
	47f7f636bc8abc3c41848a412a68ca6aa36dbd21

Author(s) (in the same order as the commits):
	Anton Kolesov <Anton.Kolesov@synopsys.com>

Subject:
	[ARC] Parse NOTE section in core dump files

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6bb09211215ded3bff4549b252712f7f3a585530>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4013>

Commit(s) tested:
	e9d9abd7470ea500eb4e82567fff68e87a30efb9

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	gdbserver_spawn "" rather than gdbserver_spawn ${binfile}

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=cb8f032760c989df81f151426f03570044475341>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4011>

Commit(s) tested:
	3589529e3cec4a5a72cd161959055d1e48dcf129

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Fix signals-state-child.exp in remote testing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f7553782448489df487a5d59f9bad5463bf19169>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4010>

Commit(s) tested:
	6342be709e8749d0a44c02e1876ddca360bfd52f

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix seg-fault in ARM linker when trying to parse a binary file.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=db2ae2b6a361f78b3f9257a71387037feef5caaf>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4008>

Commit(s) tested:
	5ce912d8016857990f894d10e15516c17cf7d653

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64] Make more use of CORE/FP/SIMD_INSN

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d5b2fc7ab3cf17378b14ad9021604d6500c3b547>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: attach
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4007>

Commit(s) tested:
	9d30b0bdab56a563a29984705778168ae93f71ae

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64] Add OP parameter to aarch64-tbl.h macros

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=45f40942d324f3ec8a76271c85fb36a33e78bbda>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4006>

Commit(s) tested:
	eacfca90f1ff457d3a7be9d593040218b6208d2b

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	R_OR1K_GOTOFF_* relocations

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=882c021cc07faa6c614928a99248335adbad5fe7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4004>

Commit(s) tested:
	6bb90213cb7b8e2f3be20f2e46f11f57f0c9ce55

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR gdb/20505 - Make vDSO detection work with core files

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3c579362af58895b92cff53f7232dd60abb13a2d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4003>

Commit(s) tested:
	5fbe0d878a691b9be42bb2bdebd027ac3dfd38c2

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Free the string buffer used by the chew program to hold each file it parses.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=bc18fb17a7b32887a6f5d42f32493828d0d06e50>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/4002>

Commit(s) tested:
	888a7fc3665a67e20da1bce2f865b0ff9ef15842

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Error on unsupported PowerPC ifuncs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d4fc1ae3734c8ebbbaddea112a27149ef609349a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3999>

Commit(s) tested:
	03bcd7394eefb9399f5ab97919a0463dea274c02

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[AArch64] Match instruction "STP with base register" in prologue

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=42bc15893a9675f1c0c7071bcb7fe998d6efbe82>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3995>

Commit(s) tested:
	f077e978deccac00fea013c4f120122bf6726834

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: gdb: Fix 'call' insn relocation with qRelocInsn

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e20f57be56a016325d5ef35e018b18b31d2b09ab>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3994>

Commit(s) tested:
	ed036b4052193ba6790ba7ee94a33a364ace3b55

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: gdbserver's agent bytecode JIT: fix "call" emission

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=13e7145dd196f895ad6fa4d2f0f6f39368faecf8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3993>

Commit(s) tested:
	c8ef42eed100c2439e600e846caa7437da93ac17

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32: Avoid unsigned long when installing fast tracepoint jump pads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=987492ff72c284077a9c6b0ab76a95f9a7fb748d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3992>

Commit(s) tested:
	9c235a72a112c5656f17499c0c0d3ad73609833d

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32 Fast tracepoints: Customize jump pad address

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c83c67fe89f9348cb4e39809fec2cf878e25096a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3991>

Commit(s) tested:
	201506dadd117df72d0528f735e44ce2e68cc66f

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	x32 Fast tracepoints: IPA target descriptions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fa6e21108eba80010239305c2ea52ba34ae8978c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3990>

Commit(s) tested:
	dd90581873482f67922a4ace92dafdfdfed09f3c

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Place .shstrtab section after .symtab and .strtab, thus restoring monotonically increasing section offsets.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=eb3dfae18b8172e51a696a0e479bc4a2f1e57adb>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3989>

Commit(s) tested:
	d311bc8bf85f8358df21301fe8a357aa1212f80c

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	PowerPC64, Don't copy weak symbol dyn_relocs to weakdef.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=aff86fead650bd95b43c16d9b58c93efc1d81c52>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3988>

Commit(s) tested:
	8a2058b5e3318a337a6fecd61b91349d1131758e

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	PR 20472, PowerPC64 ifunc confusion

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c91c5403aab6012ba294877be5c3907390e1582b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3986>

Commit(s) tested:
	6e859fd22942c6b8077416e01e50355da6cbc052

Author(s) (in the same order as the commits):
	Carl E. Love <carll@oc4738070240.ibm.com>

Subject:
	Add myself as write-after-approval GDB maintainer.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1eed4a30fa395085c27f116aeb3f37776e73ad10>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3984>

Commit(s) tested:
	d44c67f38178c5ad0c083ebff6429d6e477ea42e

Author(s) (in the same order as the commits):
	Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>

Subject:
	ppc: Fix record of HTM instructions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2e7331d30db620a32a3204882ee67a312a65fea6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3983>

Commit(s) tested:
	eb2332d78d4ef40a2696aa0f6c833ea26a739efc

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix remove-inferior error message

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=41be8dfda992ac754701b44b1ed00804abc75727>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3982>

Commit(s) tested:
	63c61e04bb7168f0819fc590ac44e7583b225f7b

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Add remove-inferiors test

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=de8cb0c0255e0c766eda3f636b26c6a5c682b717>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3980>

Commit(s) tested:
	fa0843f50204bfd46b444c0ded6a1df1051c876e

Author(s) (in the same order as the commits):
	Mike Frysinger <vapier@gentoo.org>

Subject:
	sim: m68hc11: use standard STATIC_INLINE helper

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=635ae42ed92ede334b334f4dfd89df5f8312258d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3974>

Commit(s) tested:
	b31f9478185764487b1dcfb2803ed9c399c40ed1

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Fix heap-buffer-overflow in explicit_location_lex_one

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d0c9804c8c6069de711f7ba4277396544f31fa24>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3971>

Commit(s) tested:
	4c171e25a8c83fc26b78430fa632fa9e64f61050

Author(s) (in the same order as the commits):
	Mike Frysinger <vapier@gentoo.org>

Subject:
	sim: cgen: constify mode_names

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d29f1877f77c4fa3059576d9a6a3b7580e9a1517>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3970>

Commit(s) tested:
	6b97945424f3714d2f9f6866079fd2bc658f4285

Author(s) (in the same order as the commits):
	Mike Frysinger <vapier@gentoo.org>

Subject:
	sim: cgen: drop unused argv/envp definitions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=cb5db0e4c731186cfa3bc00a00377210d477317e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3968>

Commit(s) tested:
	474a2d9f5f8a080e30812525729c3a8b7baa61d6

Author(s) (in the same order as the commits):
	Mike Frysinger <vapier@gentoo.org>

Subject:
	sim: bfin: split out common mach/model defines into arch.h [PR sim/20438]

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=afcf356347ed661ea11e64346a3d6e26b8ea568e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3967>

Commit(s) tested:
	90ac242072dc68ad454aaaa228868b0f1c8e10f9

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Correct .dynsym sh_info

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=58ecc2b4d69823af8a67bc707b278d7b8af06d45>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3966>

Commit(s) tested:
	b14bdb3bab20db9d200d669dfb5e2eadde7b14cc

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Undo the previous change to the aarch64 sim - exporting aarch64_step() - and instead make aarch64_run correctly process sim events.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f5391e3b434f9127d6983d226ef8e1755ff8b073>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3964>

Commit(s) tested:
	7b17065f843252c27e8b9c093f78382079fe4d7f

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Fix warning in gdb.base/signals-state-child.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b89c3cc6df22a91dd699b79c7e6ece19a798868c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3963>

Commit(s) tested:
	6a2775793d17c8a73956977c75111b33ec10ec37

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Export the single step function from the AArch64 simulator.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b3c2a75db14c7f49189dcc28c3dd2c7c3c4947ed>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3962>

Commit(s) tested:
	39b22471578843019026c50fcdbe0483a6045970

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix fallout from gdb/20413's fix (x32: linux_ptrace_test_ret_to_nx: Cannot PTRACE_PEEKUSER)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=04ddf66a3530c793e178347a12a6aeb2228f667b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3960>

Commit(s) tested:
	d93d1c80b351a424c1737436b5e7dfb44ddc9d46

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	PowerPC64 ELFv1 undefined weak functions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d7b1aa13b168a20651f652af544b3ee0c8f47c26>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3959>

Commit(s) tested:
	01d3dedf60912cee478c242d575f4683adada1d2

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR gdb/19187 (process record over a fork causes internal error)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2532fc694c88a1be61eaa33b4f15816f5a77a8aa>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3957>

Commit(s) tested:
	b2b6a7dab91de9a616e1d76c869d127c5752b9e6

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Introduce 'enum remove_bp_reason'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=215ad717cbef0cd8a0fbcb5a2e6eba34c1d8c989>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3956>

Commit(s) tested:
	834c0d033bdade640aab149d0d4bd7b41dcb16af

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Simplify remove_breakpoint interface

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c250c29e60782fa57c7d3c31099b87a377a44f91>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3950>

Commit(s) tested:
	a848a2271b9bd45400e875a2518ebedf1efba2fa

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Add microMIPS annotation to LA25 stub symbols

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=cfbcf2abaec785ac537072c040d4f31cdb75a9ea>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3949>

Commit(s) tested:
	c7318def0cbfc6f0e1bab5fb54306efaf9ed3a5c

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Set the ISA bit in microMIPS LA25 stub references

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4c742ca502e5e9a3eb0e779f678a9b31be82258d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3948>

Commit(s) tested:
	24cdb46e9f0a694b4fbc11085e094857f08c0419

Author(s) (in the same order as the commits):
	Руслан Ижбулатов <lrn1986@gmail.com>

Subject:
	Support setting thread names (MS-Windows)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a51a2041f2561255055e47eb3a3573a186ed3b71>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3947>

Commit(s) tested:
	669f9429c7b5a9e827497c5ad70efb6a570c8c7d

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Quiet ARI gettext checks

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=888d8d02ce76a6a67f332936c8602baa5d5d8766>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3943>

Commit(s) tested:
	3eb7562a983bab4c768983bcd85708852d171121

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR gdb/20418 - Problems with synchronous commands and new-ui

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8fd83d326bcc25368dafcf6bd8f84a1b50487a75>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3942>

Commit(s) tested:
	80614914274f7166baea2ec656aec6a949869324

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR mi/20431 - Missing MI prompts after sync execution MI command (-exec-continue, etc.) errors

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3188a4942ef1afeea5d9c4d76064ceab82879b12>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3940>

Commit(s) tested:
	f348d89aeccaf3eb613e2f31a823baa64300bf88

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR gdb/18653: gdb disturbs inferior's inherited signal dispositions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=52c48c6b63f87653ae9919087a60863ed3d18283>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3936>

Commit(s) tested:
	e5ca03b41d2c94919d5cb59d8d7adad98c29d156

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR gdb/20295: GDB segfaults printing bitfield member of optimized out value

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1889172e648e6199bb64eb9a9403a4f2c02e4557>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3934>

Commit(s) tested:
	6a17ca318b7bc453831049f1d8bbc7f336f5ac5a

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Regenerate some target description files

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=75ce5898dd4c7e8ab1fead8364c1298624bf8d9e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3933>

Commit(s) tested:
	8a286b63457628b0a55d395f14005f254512e27d

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix memory leaks in chew program.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=08b7dc41a463337f3cf7c5be7edb2e365c9a85ef>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3932>

Commit(s) tested:
	c632e428c2fd707b83a2c61e0b25b473e3d7d18e

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Remove unused cli_command_loop declaration

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7d09fce854da3a29084caf74f26b91880df57031>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/continue-all-already-running.exp: c -a
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3928>

Commit(s) tested:
	69ffd7f270c8a3f1b577848d2536b93ed01287de

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb/NEWS: Mention that C++ is now the default

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=bc4f065af53651b8c2746b83aee228f22812dfcc>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3926>

Commit(s) tested:
	1baf514936892a01d8ea49c2c1ccfd7ecd3b7dcd

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb/configure --help: suggest --disable-build-with-cxx instead of --enable...

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1c4adbd0ecc7bc52c109dfcc72b1da25ed8819c5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3925>

Commit(s) tested:
	54ddd295b505efe4b07cc1e939d4e150032603d8

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	2016-08-04  Thomas Preud'homme  <thomas.preudhomme@arm.com>

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fc9bb7d97b72c957d3bfe056eeb4ab11ac1390a4>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3922>

Commit(s) tested:
	6f67973b4280cfd045e632a3340becd16e43b4b1

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Determine target description for native aarch64

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=37ed0540cd67cae5a977a34ea5fafc6a21b3b98e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3920>

Commit(s) tested:
	fcd4a73d7dc3505662b4d58489f4c1b8b003b8f3

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Quiet ptrace error ESRCH in regsets_fetch_inferior_registers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8ac01cd6f3b1f49a48ff153c44b00349c7354f2e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3915>

Commit(s) tested:
	8d2a0a14e53945eb260c08752654bd03a240ecf7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Update NEWS to mention Python breakpoint events

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e03768faf4b4969ebfea22f2208955759aff8589>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3913>

Commit(s) tested:
	33541b2e56a653b9260fb1dc2cd7dd73b0c49169

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Add myself as Rust maintainer

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=122533c51cd4f6aa7caa362950c49e4260b86a9a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3912>

Commit(s) tested:
	979659d08478172311764b468bfce4960b38760b

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[GDBserver] Remove td_ta_event_addr td_ta_set_event and td_ta_event_getmsg

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6751e3665e4ef802637bbd895a592bbd0f885910>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3910>

Commit(s) tested:
	fa3fcee7b8c73070306ec358e730d1dfcac246bf

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Synchronize libiberty sources with FSF GCC mainline version.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d03a9534cdf3eec8655a9f2e0ae7aa3967c8d4e3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3909>

Commit(s) tested:
	a94d834c9d0108f0bb50ddc311554d1bed320f54

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix SH GOT allocation in the presence of linker garbage collection.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f43688a766d45ad77cfaf8f5a082a32be7a6fed0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3908>

Commit(s) tested:
	dfdaec14b0db059497b47b515d753b6383772b6b

Author(s) (in the same order as the commits):
	Andrew Jenner <andrew@codesourcery.com>

Subject:
	Fix some PowerPC VLE BFD issues and add some PowerPC VLE instructions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e26076d68de26e43300157d036ed73e80e3e71d1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3904>

Commit(s) tested:
	751b375e01e7e85aeccdd965578cb2040836593d

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Update NEWS post GDB 7.12 branch creation.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=46fd4a47e3398510120532410f72044e00ad3251>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3903>

Commit(s) tested:
	b2bd7787d3e5f87f66761f555d89b8ce5d631a62

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Bump version to 7.12.50.DATE-git.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=97c6c7fd6ffb377acfca09de4a95056b3ae87839>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3899>

Commit(s) tested:
	781bf64d2414f70c51938e15ebce5c88e7172e55

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Update Swedish translation in bfd directory.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6ca08d06670b4aefa1c68bca2ef54983f6080926>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3898>

Commit(s) tested:
	e3465b24a22bd1f783313e680aa76bac83c8aaf5

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Tweak gdb.cp tests for aarch32

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=72907bd38c9270550ddd1a6e74650fcb4bca3eab>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3897>

Commit(s) tested:
	7bd374a44d1db21b54a9a52ecde1d064cdaa8cd1

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/GAS: Implement microMIPS branch/jump compaction

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e66cc64b9bc316a691da6eebe05807e3ab7711ef>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3896>

Commit(s) tested:
	db18dbabad8e7b63e98d47813ef20acac7072350

Author(s) (in the same order as the commits):
	Graham Markall <graham.markall@embecosm.com>

Subject:
	Begin implementing ARC NPS-400 Accelerator instructions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b313f8574b204995ace07e1aa919747819ebf35e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3895>

Commit(s) tested:
	147d994bcdd36a177e49e7b6ac8d9c1f7b4cdcf5

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix seg-fault when running garbage collection on coff binaries.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=174130c653c65fa85814d6df30d0117e7709273a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3894>

Commit(s) tested:
	293acfae4e3c9aad417e262edc9847c79bbbbb11

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Wean gdb and sim off private libbfd.h header

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f145a8a042b0a4e4daee60ecd45338f9fd7fad37>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3893>

Commit(s) tested:
	6598661d14c90cabac1daa5e683d1e17883b2e41

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR server/20414 - x32 gdbserver always crashes inferior

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=031e9bb5689d3ab5e999548fc6bb2504384c5ec1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3892>

Commit(s) tested:
	0b31a4bcec2efec9bc8ca40deb61123c52690a2e

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	PR python/20190 - compute TLS symbol without a frame

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ec23b7732e5dc4ad3b94b0c715b6315ba8161db0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3891>

Commit(s) tested:
	54806ffa85643c3a1ee721d5c3f5586d32f86ee1

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Handle branches in PLT compression selection

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fbc0c172a06c86129142d54c53abe907193a8499>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3890>

Commit(s) tested:
	40c31709c6a51926fcb409611caa52b2da6515c0

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR gdb/20413 - x32: linux_ptrace_test_ret_to_nx: Cannot PTRACE_PEEKUSER

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fcf32c0731fd9f25c8c7c84de462f65b5fe91fb5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3889>

Commit(s) tested:
	9cf12d57c58a82cfe3e6fee26d1ea55dfe49f9c4

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR gdb/20287 - x32 and "gdb_static_assert (sizeof (nat_siginfo_t) == sizeof (siginfo_t))"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=03e8c9a2e12bd0ea6641f2d1eb73fa3b1efeef8a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3888>

Commit(s) tested:
	e0461dbb653dbb3c46ea7a15054fd2c98f879f31

Author(s) (in the same order as the commits):
	Markus Metzger <markus.t.metzger@intel.com>

Subject:
	btrace, testsuite: fix assembly source file selection

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3d4a13b39fc9267addd04d7b4a5db6ba220b18a0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3887>

Commit(s) tested:
	8194e927cc66e8cceb9890240ad75363b3ca6d53

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Handle correctly passing a bad interpreter name to new-ui

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d25ff0f27a6956fb0dae76c8966159c65729bd0b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3886>

Commit(s) tested:
	0e1a6a5169023ee0c19de2c9160b469e43634b21

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	linux-procfs: Handle lowercase "t (tracing stop)" state

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8cbab95187e260d22e11c3a8ad18b9b7bd32cf77>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3885>

Commit(s) tested:
	d617208bb06bd461b52ce041d89f7127e3044762

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	linux-procfs: Introduce enum proc_state

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=66bc94156053d53db21b4b5916b65cdae5d894ef>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3884>

Commit(s) tested:
	3a1518e4f3c467cfee2786b0af3388529f14d23b

Author(s) (in the same order as the commits):
	Tim Wiederhake <tim.wiederhake@intel.com>

Subject:
	Add myself as a write-after-approval GDB maintainer.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8216bed8e78f8498401d246025baad8b7d1c4de6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3883>

Commit(s) tested:
	c0272db5854a799a9f3bb3803c3d03d1a62b9ac2

Author(s) (in the same order as the commits):
	Tim Wiederhake <tim.wiederhake@intel.com>

Subject:
	btrace: Resume recording after disconnect.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=27b11ea5c177b32b77397b6586ac671180ed6000>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3882>

Commit(s) tested:
	e34879080d8935792ef3942efa5f25b4c3169b5a

Author(s) (in the same order as the commits):
	Gabriel Krisman Bertazi <gabriel@krisman.be>

Subject:
	Implement catch syscall group

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d327487afd918ef6658b273f083512382e7d1c20>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3881>

Commit(s) tested:
	49ecef2a7da2ee9df4ae675f99b70518fbf1bb23

Author(s) (in the same order as the commits):
	Andrew Pinski <apinski@cavium.com>

Subject:
	Fix ARMv8.1/v8.2 for hw watchpoint and breakpoint

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=62ea0cb69e70e1456d5e742b6cd0412984488062>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3878>

Commit(s) tested:
	eed2386e45968fa4fee8d093895f4789044fb077

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Get "num" as unsigned in ctf

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a6c3b9771a4a2559e4e1481b204d3f36102648ec>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3877>

Commit(s) tested:
	c02d11a585398734a2178d65a17411cd3050b9d2

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	Fix segfault in ARC linker when generating got entries for local symbols.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3d2e6dc44aede0cb093715e05c2df205cf84daba>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3876>

Commit(s) tested:
	fecd57f9f1f58f043861d5929a650f35a88a6caa

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Set BFD_VERSION to 2.27.51

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=59b55795543571c56dbc7024b32df93036415e5e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3875>

Commit(s) tested:
	12df5c002dcbfc5ac54983e1e7040a182f71a753

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Allow empty struct expressions in Rust

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ef6111f51c3a54e41b7010fb01e3c26869266b08>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3873>

Commit(s) tested:
	f515a1d643b599ebb8a23d3d95e9f0dfc8261a11

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix djgpp gdb build

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5bb74eb63ae0b3f1ad8f99d50c729209eb065001>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3872>

Commit(s) tested:
	c25b7ccef4d6d96ed4af1d27c79d78767dba7161

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Remove unused variable in windows-nat.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=62f8711c0e86f7944c995bc73628e7e60c5e7b81>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3870>

Commit(s) tested:
	2583da7cd64e680e43cf92c8022eadee84357b3b

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Fix cast to 'gdb_breakpoint *'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=cc098a465a355360835e73a976071a6700f9da54>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3869>

Commit(s) tested:
	21536b367ce73eed103e1389b5f45010f0c96bbb

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Support vCont s and S actions with software single step

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a8885eb5e5d7a196f8c74ccf822e9f07f891e95b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3868>

Commit(s) tested:
	8901d1936e4e691f0b3b976f5626ac5a8f27aa7f

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Use reinsert_breakpoint for vCont;s

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6e57d30e53603dae95c20fddfecb85961444e851>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3867>

Commit(s) tested:
	0e9a339ec8ffab80fdbe97adaf888fe03b73fe22

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Enqueue signal even when resuming threads

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e1092fabee3bc97e0f855981fc188ca1baa65d59>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3866>

Commit(s) tested:
	4281b351bfa3b646ab531cf73c56e49366fef108

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Use enqueue_pending_signal in linux_resume_one_thread

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8b88e3a5aa972c0c400ff79a5d21cb11b3a03b55>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3865>

Commit(s) tested:
	984a2c042e82f2306183d9d165c5cb99e4341503

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Switch current_thread to lwp's thread in install_software_single_step_breakpoints

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a1585eba3ee096db025f19adcfcdc3df89b94d50>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3864>

Commit(s) tested:
	bec903c96bc5119e357b4ad2cab99bbee7de628e

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Make reinsert_breakpoint thread specific

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2114f994a7e4d985f3edd9edd892c71d435dacc7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3863>

Commit(s) tested:
	63c40ec727109e2bb2956ab95968350df00c1aa1

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Refactor clone_all_breakpoints

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8f15c26542981045cad3070303e6b9a26bc36b58>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3862>

Commit(s) tested:
	9aa76cd0a7b2cfdcc9da31e7763a695fac89f569

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Create sub classes of 'struct breakpoint'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8fd500ea68064a78e721419ed0c0bcd93fe8f4ba>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3860>

Commit(s) tested:
	bae62ee2087bb54fd06746c99de9b734cc58a721

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Skip gdb.server/ tests if lack of XML support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=eb9698b71a140e807ab10c7529a72fc7e6979f79>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3859>

Commit(s) tested:
	0f118bc7a620f3e3ceff6f2fadca7b8d287a553b

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Use fsqrt() to calculate float (rather than double) square root.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c47db181a386e951e9a652d8cbe966c6757cd4a4>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3857>

Commit(s) tested:
	5df1bc570fcc5ef5257b7a044acdaeb6b95b9822

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Fix implib test failures

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8caf139062b547edb97ece60797ed2ff255bcbb4>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3856>

Commit(s) tested:
	dbaed3853474e7bd824a25bc454a8f2fdd71d2b3

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Use a real vfork done event on FreeBSD when available.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9c57ccde8302b9793b88ff6d5715273c521b36d3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3855>

Commit(s) tested:
	5fa14c6b9789bad6f91dd21889f7b1a0eb75c6d0

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Enable ptrace events on new child processes.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ad1ff40e2663209ae62ce5c8aeddabe6246897db>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3854>

Commit(s) tested:
	da95a26cc381c0f092f515ffe108075985c16d7f

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Consolidate code to enable optional FreeBSD native target event reporting.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=63431e94e718b8b26821673e3fff108c284a7871>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3851>

Commit(s) tested:
	9ab8247228844bb6608d6b2c99b6d8732bab08c1

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Check p_paddr for program header space

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7d3fe713e0fd3f5cd870ac7a5ce7af2fdff9042e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3850>

Commit(s) tested:
	027d97f8b0193a8113ee60bafc686d45d0af59ee

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite: Fix gdb.gdb/selftest.exp for C++-O2-g-built GDB

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ce7f282efbd1227144666f168d87b043f0378156>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3849>

Commit(s) tested:
	7674d381b47f9f2411c0ca1da0c152940dc0d7bd

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite: Fix gdb.btrace/tailcall-only.exp errors on x86_64-m32

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f47a625ca4c66df716f7300bf66754ebf3743fae>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3848>

Commit(s) tested:
	72b5d09937fa2dac8ca7c801b9ddefe1b0176b6f

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite patch: Skip py-unwind.exp on x86_64 -m32

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5ff41e97ffa996687c754a35df596330da03db3b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3846>

Commit(s) tested:
	3ce512885ba76da53fae84cd1a555bc721fdd25e

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Mark some more powerpc relocs as not handled by generic linker

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=75ea7c2d288a88609287fea0bc6d7a3dfe425b94>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3845>

Commit(s) tested:
	1f960ced9a3e4aa0823dcc234d9de49aebaee055

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Build gdb.opt/inline-*.exp tests at -O0, rely on __attribute__((always_inline))

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=231f33b566a82167c44e1603decbcefdfa6fee34>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3844>

Commit(s) tested:
	a6ebf6169a1bd14724b9ac49990089542396f576

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS: Convert cross-mode BAL to JALX

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b0f49756d2f2adde0232e24e520ece8f12c83938>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3843>

Commit(s) tested:
	9d862524f6ae9703fe8e264dd4785756d358570a

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS: Verify the ISA mode and alignment of branch and jump targets

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8df7eddaa7b1d433d51f674549095eff48c24fe8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3842>

Commit(s) tested:
	f25827c194fe9894f2c65f7e1101854022be4328

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Use do_self_tests in selftest.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ca0172e26492511913f017fd37dae374b480cba6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3841>

Commit(s) tested:
	59f48f5a45d2300da401f1fccab31ba436217469

Author(s) (in the same order as the commits):
	Denis Chertykov <chertykov@gmail.com>

Subject:
	Update PC when simulate break instruction.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f130c01669e10a7d4dcb66edacf19177a518d564>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3840>

Commit(s) tested:
	7d0b9ebc1e0079271a7c7737b53bc026525eab64

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Don't include libbfd.h outside of bfd, part 6

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a1fb13cfbc671aa7865a7a6812d5478056b2716e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3838>

Commit(s) tested:
	00dad9a491b3bb0069b5a1471b8f32052e071965

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Don't include libbfd.h outside of bfd, part 2

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f9e405cfc758a776edfa9c0aac30bf24d464fddf>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3836>

Commit(s) tested:
	37539ebee2ea9fc0daceaae1074a79de88d563fb

Author(s) (in the same order as the commits):
	Don Breazeal <donb@codesourcery.com>

Subject:
	GDB testsuite: Escape paths used in regular expressions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c7b395059357ac69f28637e975d60184f498178b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3834>

Commit(s) tested:
	bc7b765ab71f967eb2a9c3da111d7529eec46fbe

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Pass SIGLIBRT directly to child processes.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=846178b6d8ecd34a7e37784c7992eda44f33ea2d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3833>

Commit(s) tested:
	f7e8b360fe6dd93aae7cb4af554dc66364da4fe0

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Tidy up debugging in the ARC port of the BFD library.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9d58caeddb67b9023d8be1d121ec0a3b1ccd3ba9>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3832>

Commit(s) tested:
	06ab6faf83ce47ca64198819eee02e4e56dc5a74

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	COFF buffer overflow in mark_relocs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8be2b7f0759999693b98b061abe96a5bdcbfe421>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3831>

Commit(s) tested:
	0c117286270e8166022900f4e5fef89719ccd2dc

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	BFD: Let targets handle relocations against absolute symbols

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0d61998ad2651e356ecdbef3398910bb01ca235c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3830>

Commit(s) tested:
	7f131b39970944cb53b407715880d333c5248cac

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Add missing newline to py-breakpoint.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1cc24eac54300796f65896b21cb84d7e3cb6143c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3828>

Commit(s) tested:
	ac29888840f025448225e600d4cf99e126386878

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Remove some variables but call functions for side effects

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=01a36aa6449732f7403bc2165dd1864401b4e174>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3825>

Commit(s) tested:
	821fc4aeef26bc7e5d5943c2f5d009a23e16883c

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Add one use of ATTRIBUTE_UNUSED

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c5cdf24012460db4846cf8f3feeb04982f1766e1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3824>

Commit(s) tested:
	537d9b851957475a8122949939023c81b1df1673

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Change reopen_exec_file to check result of stat

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e9242d47f7ae065418584359993d1d3ad84de094>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3823>

Commit(s) tested:
	7df94786e4723ba93d8982e55fc5e652b4b80142

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Small improvements to the ARM simulator to cope with illegal binaries.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=498078d82479c69093d036fece38de841eeb3e19>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3820>

Commit(s) tested:
	93daf339a4d9496ecde15d3b1e852fbdb38c07d0

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	PR python/17698 - add Breakpoint.pending

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=921f3dac51dbeb27707b879b94f43f0c9c3c17d4>

*** Diff to previous build ***
============================
XFAIL -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3819>

Commit(s) tested:
	43684a7b844bce64735940b55b667f7086fa3d44

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	use user_breakpoint_p in python code

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e1bd1bb6b50259624a8904de3053306c2be155a9>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3818>

Commit(s) tested:
	6571a3815623d907b7a3f560e909edd8c76a9e1c

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix PR cli/18053

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ebbb51493c3eeeaaf0976bfdc4829f5ffc9a3601>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3817>

Commit(s) tested:
	92281a5b06dd83a2a7d96ab8d83ae40b4e519acd

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/opcodes: Address issues with NAL disassembly

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=72d54a7090b4d202fa17362a85227ef48ced3598>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3816>

Commit(s) tested:
	6e7ced37e756420742d51abb044c24d0f1929143

Author(s) (in the same order as the commits):
	Jose E. Marchesi <jose.marchesi@oracle.com>

Subject:
	opcodes,gas: support for the ldtxa SPARC instructions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9553349fe8b9e136d9656a1d83d5862e31edaf1c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3814>

Commit(s) tested:
	37567a2cdd8823c5700ec83b757179083446bf07

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Align x86-64 .got/.got.plt sections to 8 bytes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6d3d04ca833f2887199324bc7cececcebe648dfa>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3813>

Commit(s) tested:
	e0f3fd7c44cebec7d787893b9c800e7de509cb32

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	PR python/19293 - invalidate frame cache when unwinders change

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=07ea193e079be0f14387824b91fbfb58edb5db12>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3812>

Commit(s) tested:
	cf143069f39b4feeeca175f88b6d1a5c1cb0fee4

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Second fix for grammar in error message.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=56966ab673052163ae06e60e03a45c7828e5b924>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3810>

Commit(s) tested:
	b1c51e367880f5065707a2a902b99c6508d19ef8

Author(s) (in the same order as the commits):
	Chung-Lin Tang <cltang@codesourcery.com>

Subject:
	Add type casts to allow C++ compile.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5e258fccaaecfe186daa23a0d4b8c8d6a7ac27a3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3809>

Commit(s) tested:
	f231881ea65232b3f67379326a5b605c465dffc4

Author(s) (in the same order as the commits):
	Douglas B Rupp <rupp@adacore.com>

Subject:
	Fix grammar in error message.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=762118a10286deebef7e5e797feb1984bd58a8ad>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3808>

Commit(s) tested:
	b9316f59852ff821cf621aca1e6ab8e7674a5615

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	Enable relocation overflow messages by default.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ca9b3da4addc9d079ba278678719d655914477bd>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3807>

Commit(s) tested:
	08759e0fc8b0de1c56ad388212a104f3a6d61c25

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	Fixes done to TLS.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=88bf142cce9843a8ed9381f5cb97393143c62189>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3805>

Commit(s) tested:
	2f831b9a2bfbd0c2f6083d41b6dc9d9fc6b61e5a

Author(s) (in the same order as the commits):
	jamesbowman <jamesb@excamera.com>

Subject:
	FT32: adjust disassembly opcode match fields

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c4dcd2dea2e98880d9db41a33eeb1d8ba077a5e7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3804>

Commit(s) tested:
	41c977aa5c81c04a9fea61bfe0b88e428a4b1839

Author(s) (in the same order as the commits):
	Walfred Tedeschi <walfred.tedeschi@intel.com>

Subject:
	[obv] Fix broken build on Fedora 23.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=35c85f6253724f60eae4fda2bef4278f917c8f6c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3803>

Commit(s) tested:
	4f19a0e6b45c63c0b4afe27a19d144cca412d4ae

Author(s) (in the same order as the commits):
	Walfred Tedeschi <walfred.tedeschi@intel.com>

Subject:
	Fix of default lookup for "this" symbol.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1f891f4b7f0f1748c8bd952f60059ffad6e3c77a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3802>

Commit(s) tested:
	986cf455bfb25d8696232695fbcc93649c10a523

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	gdb.ada/arraydim.exp: Fix directory layout

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4c502dcffad73bb59efda2e897a7fba996b17205>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3801>

Commit(s) tested:
	f0464b231f046b836e2ed721d764fa309f18eb39

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Remove extra output directory level for Ada tests

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1127148b14ff2c385f94acc951dc35fac6f60855>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.ada/arraydim.exp: compilation foo.adb
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3800>

Commit(s) tested:
	fb36c6bf0a019e7b989e61710f17b5ce4ec27686

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Remove extraneous parentheses.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0d341ac934acc5dededc676f16591c59fad5530c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3799>

Commit(s) tested:
	db297a6501dc44c10bff096eddcc358b48810aad

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Use unsigned integer constant with left shifts.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=29126a2f0374b87e92765b421d297c08fd4823af>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3798>

Commit(s) tested:
	9ca107148e888a7f7aaf3582569708684bd04690

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Set uses_fp for frames with a valid FP register explicitly.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a97f267cbfdcfb7ae8ad21855f196f4e2493b34f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3797>

Commit(s) tested:
	d66ff635bec25bf940cc6d173a92f7796f18b310

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Remove check for negative size.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=605a2509802d91061490240641e77747fbecccd5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3795>

Commit(s) tested:
	1040b979bc46474530fa4fee397b8acc460c01e9

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[ARM] Fix endless recursion on calculating CPRC candidate

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b53c9d8ba6d63771404112236f5269d7db29aa57>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3794>

Commit(s) tested:
	42d940118a6372d6e85f71a54fed75fdf5c606bd

Author(s) (in the same order as the commits):
	Manish Goregaokar <manish@mozilla.com>

Subject:
	Allow subscripting raw pointers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5bcd5a1c40888a13b29696726c55503c2e21429f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3793>

Commit(s) tested:
	647c264cb2c60c90ee2d09edb6bd001ff357306d

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Fix fail in gdb.mi/mi-reverse.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7238bf2d0207de1e6b0b3ab72f84d89ad3d85958>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3792>

Commit(s) tested:
	d5a67c02901c0abe946546f2b3b1a3b67a876136

Author(s) (in the same order as the commits):
	Andre Vieria <andre.simoesdiasvieira@arm.com>

Subject:
	[ARM] Purecode compatible long branch veneer for M-profile targets with MOVW.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d2153036ece125268788a61571419cb835c085da>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3790>

Commit(s) tested:
	13cdc2afb7873547ec2910ba647fb4a68602252f

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	babeltrace compilation regression

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7b0496b2de1720722adbbbe001e0fb474b28627c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3789>

Commit(s) tested:
	09c98b448f3d89cb9576e4e73991c2312939e0af

Author(s) (in the same order as the commits):
	Don Breazeal <donb@codesourcery.com>

Subject:
	Optimize memory_xfer_partial for remote

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b34885c013858df1fd2a52956d899fd5d323d85d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3788>

Commit(s) tested:
	93d8990cba700abdf9d2be06a5022e588d097fc8

Author(s) (in the same order as the commits):
	Szabolcs Nagy <szabolcs.nagy@arm.com>

Subject:
	[AArch64] Fix +nofp16 handling

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=10a0fa6b07810832879c67122e994f3b4e541757>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3787>

Commit(s) tested:
	2c5c2a3321706c28cbf1b85a970a2e32912eb0c8

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Fake VFORK_DONE events when following only the parent after a vfork.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=69b1716399cd52dac50d090bcd69816da0130bb3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3785>

Commit(s) tested:
	bb2a62e694953c099c41d49f59947d3d91cc7c27

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Honor detach-on-fork on FreeBSD.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=46cb1a8241df6b0050d35a059d15969f9cd701ac>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3784>

Commit(s) tested:
	5e866f5aeeaf7514f5ca4f9eaba41594eac22e5b

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Fix Thumb-2 BL detection

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3db79ceb476c57cd1678df6f7cb04c9dd4cd7ab8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3783>

Commit(s) tested:
	5077bfff905136e9d9a8fdf0886f6217887622ad

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Set debug registers on all threads belonging to the current inferior.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6085bbb2319b7f2a8b0d59f2d7dfcb4860141978>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3782>

Commit(s) tested:
	a3405d124e1388b613a35af49f19f0cc1b8d959d

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Consolidate x86 debug register code for BSD native targets.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=27c666e456e897c1ed64cc4a36772c84f7e3779e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3781>

Commit(s) tested:
	20aa2c606ef682889722b03b1d874befa84fbf53

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Extend JIT-reader test and fix GDB problems that exposes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=547853e4272e08713ab63cf7ec28f696b960f3ee>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3780>

Commit(s) tested:
	ced2dffbf17bc661e959da1e39411d706ade9f77

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix failure to detach if process exits while detaching on Linux

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7133ccf7757d686147600c92d936d265e44dc329>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3779>

Commit(s) tested:
	630008884535a5b26828325e48e729034c110536

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Forget watchpoint locations when inferior exits or is killed/detached

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c5dcacbe226a82259ac12014ac21bd2bc26da48a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3778>

Commit(s) tested:
	0f48b757071509040d800ff9f7c8726e5828bd1a

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Factor out "Detaching from program" message printing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3363420aece1a93d211f13b53a433662f0e77c2c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3777>

Commit(s) tested:
	c07315e0c610e0e3317b4c02266f81793df253d2

Author(s) (in the same order as the commits):
	Jan Beulich <jbeulich@novell.com>

Subject:
	x86: allow suffix-less movzw and 64-bit movzb

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c733aaf19f3c72f2860af648cd95361722cddc21>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3776>

Commit(s) tested:
	9243100aef7486524f1a7f87bbd2cce1fe980b75

Author(s) (in the same order as the commits):
	Jan Beulich <jbeulich@novell.com>

Subject:
	x86: remove stray instruction attributes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=69624976ad7ce0164eb903bdecb32d1224faadb0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3775>

Commit(s) tested:
	8325cc6398187c12e0fe04a68a21e4eb5f44fa20

Author(s) (in the same order as the commits):
	Jan Beulich <jbeulich@novell.com>

Subject:
	x86/Intel: fix operand checking for MOVSD

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8a815f6f4c1ec51e419b9646749115a52e9fc662>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3773>

Commit(s) tested:
	038d48680941f014349256aeb7bab14b3f01d58e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix gdbserver/MI testing regression

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7e85b0674466135e7cdbfd76bc5102022580c75d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3771>

Commit(s) tested:
	534dbe460e692a9befd9aca0eb0812db47459a30

Author(s) (in the same order as the commits):
	Matthew Wahab <matthew.wahab@arm.com>

Subject:
	[ARM][GAS] ARMv8.2 should enable ARMv8.1 NEON instructions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7e28648ebed8652398e2f3de9e595e89467778e9>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3770>

Commit(s) tested:
	c7be441465094e5ffce2f4205ea887676965d0be

Author(s) (in the same order as the commits):
	Jim Wilson <jim.wilson@linaro.org>

Subject:
	Add support for simulating big-endian AArch64 binaries.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ce5b0fa3a5ddf06fed928794b41c782396b8d92e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3769>

Commit(s) tested:
	e56534680d0df0e2ca313086b1758480c9374615

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Add copyright header in gdb.base/return.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=37a4bb6060d3e4573c26b203d8831ae670f03be7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3768>

Commit(s) tested:
	803b47e5d4dc86b953aba0bc44865de287726dbe

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix PR python/20129 - use of non-existing variable

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=acf38fbb12442a5d50b85022687ba435ead0ac00>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3767>

Commit(s) tested:
	9d78f827e0da9ab6fda2d6ef2d59cebb805b411f

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	PR gdb/17210 - fix possible memory leak in read_memory_robust

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8494fc66257ed2a8775f9d9e629e945aef205d4b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3766>

Commit(s) tested:
	9bf74fb27dc6e2a9679403d66fe919215e3c2a45

Author(s) (in the same order as the commits):
	Manish Goregaokar <manish@mozilla.com>

Subject:
	Initialize strtok_r's saveptr to NULL

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=134a3b57232b190d6dac8a79114e533bc2e08640>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3765>

Commit(s) tested:
	28244707d9e4f35cab1f9069cee1d44b38be095f

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Set unknown_syscall differently on arm linux

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6bd393704d4ff50cfa7898c6e8cadcefeff559b9>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3764>

Commit(s) tested:
	042c94de565ae62640c064f1cb33d28484aeb9d3

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	sparc: make SPARC_OPCODE_ARCH_MAX part of its enum

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f62b1e5bb69b723cb68d0b3950b4997bee275f90>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3763>

Commit(s) tested:
	a405c2281ad29b5c7f9f2a4d58b7cfef2b74ba99

Author(s) (in the same order as the commits):
	Manish Goregaokar <manish@mozilla.com>

Subject:
	Use strtok_r instead of strsep in rust_get_disr_info

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=43341da5d6b589dba129c5b00ad10e48ada44892>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3762>

Commit(s) tested:
	d691934d08a4132506a19ac8d7565f1a0461a80a

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Preserve all mapping symbols in ARM and AArch64 object files.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=afa155520173ee916cc1b785e934443f5153fa75>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3760>

Commit(s) tested:
	2ac09a5bbbff78d363ede2f038c31a9b1cb0887b

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[AArch64] Use int64_t for address offset

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=625779f7fc1aee50bae7b972c926c7f49fe27135>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3759>

Commit(s) tested:
	bb95c51a232dffb46067c402ac62f1f3303b6bbd

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix typo in previous commit

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3691242914a1b321c99ab43da02242eb4f70f130>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3756>

Commit(s) tested:
	fca2a38fdb391f810e309a12d5279047d4edac34

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Mark ARM mapping symbols in object files are precious, so that strip will not remove them.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=479eeb857525d099c242ac68a9c6e5961662536c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3755>

Commit(s) tested:
	79e7fd4f78e0c33e77dd0b69d7de8167a60af06a

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Implement get_syscall_trapinfo for arm-linux

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8ebe4de42530c11bd4971f73a28810c598ace34b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3753>

Commit(s) tested:
	4cc32bec04aadc5c070d0f4aee656313a4854c11

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Remove parameter sysret from linux_target_ops.get_syscall_trapinfo

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=834728784f1ffac43f95797c1a90ce934262e651>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3751>

Commit(s) tested:
	7160c10d6530b79ea45d435933b07765f610f54d

Author(s) (in the same order as the commits):
	James Clarke <jrtc27@jrtc27.com>

Subject:
	Don't convert R_SPARC_32 to R_SPARC_RELATIVE if class is ELFCLASS64.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9d04dfbf2d7d704953bbf323eaa32beaab32189a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3750>

Commit(s) tested:
	dab26bf4e7c8b48e0c5ffbef1c5400807b78072c

Author(s) (in the same order as the commits):
	Richard Sandiford <richard.sandiford@arm.com>

Subject:
	[AArch64] Make register indices be full 64-bit values

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d3218a74d1dc4445a3b8a15bc97efa3972afe4b1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3749>

Commit(s) tested:
	c9775dde32773c57d4eb5dfb4265eda9cb8adbe8

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS16: Add R_MIPS16_PC16_S1 branch relocation support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a4d962a624d9928672055656739391397214131b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3748>

Commit(s) tested:
	921d8f549f9e35d3f83c7b1a381146a7dc1246f4

Author(s) (in the same order as the commits):
	Manish Goregaokar <manish@mozilla.com>

Subject:
	Print void types correctly in Rust

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c10cb3e0bcb7c848d7a1e46c714c4676fa05c8d5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3746>

Commit(s) tested:
	f4952523968703caa027a5922263eb97b88bedc3

Author(s) (in the same order as the commits):
	Pierre-Marie de Rodat <derodat@adacore.com>

Subject:
	Fix use of a dangling pointer for Python breakpoint objects

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=20df2beeb8fff20508649e4a53e5a78f6d47de00>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3745>

Commit(s) tested:
	48afb19489cf39cb7f48e24fe7c567a9cd438b95

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	dlx: move prototype of dlx_set_skip_hi16 to elf/dlx.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=02816161d34d9504c48e61ca41036f3c4cc1cbcd>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3744>

Commit(s) tested:
	5703197e0421f490c3dc25ecd9ea04ca59750b64

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	remove a few sentinals

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f5826481c7700c3ebd0fd600407917eb583025a8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3743>

Commit(s) tested:
	7c2c4aa12f4931fb79f94d787ef60e88960bb2a7

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	xtensa: prototype xtensa_make_property_section in elf/xtensa.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fb1bdeabaaa371674c6b3ba98f1916e2311c5c16>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3742>

Commit(s) tested:
	9e8a8ea8feadb0d3cd6443a1bc773b1dc835767e

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix formatting in rust-lang.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3a07cdb5dae0f89de065e2b29c774f2712d3dd87>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3741>

Commit(s) tested:
	fccb08f8cd2035b50a2b0a5e09983180b7411685

Author(s) (in the same order as the commits):
	Manish Goregaokar <manish@mozilla.com>

Subject:
	Add tests for printing of NonZero-optimized enums in Rust

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ae0c62eb02576e02a3579bb2e15a8fffb285e0a2>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3740>

Commit(s) tested:
	b5a4b3c5e711be9096423f9765623eda449d8f4d

Author(s) (in the same order as the commits):
	Manish Goregaokar <manish@mozilla.com>

Subject:
	Make evaluation and type-printing of all NonZero optimized enums work

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c8a49acde183a71afb9821be72dffc7572209ee1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3739>

Commit(s) tested:
	6b8505468e64c2be8d0eea1f2b8db86fa3897600

Author(s) (in the same order as the commits):
	David Taylor <dtaylor@emc.com>

Subject:
	Support structure offsets that are 512K or larger.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d56283dcaaedad4cb55a3b21bf413eac5c8ac399>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3738>

Commit(s) tested:
	2907f41490b2b5602f47c5acdf9ad7ae94eaeff9

Author(s) (in the same order as the commits):
	David Taylor <david.taylor@emc.com>

Subject:
	Add myself as a Write After Approval maintainer.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=863417f6a85eaaf69a14aa25833d94de7bc3847d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3737>

Commit(s) tested:
	e6cdd38e8f0fead14cd3c528e9a4b666e1871752

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Add support for catching system calls to native FreeBSD targets.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d1e0399d5aa37857dac9c6a493f49ba4303317c3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3736>

Commit(s) tested:
	82372b2f2747d347e24bb10ddc7bc7e828222a42

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Add a gdbarch 'print_auxv_entry' method for FreeBSD ABIs.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=99c8f3f453b5000af7338111ccc6b10b59800896>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3735>

Commit(s) tested:
	2faa34476d9e6120eaf389b7f91b7227183fa2ce

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Add a new gdbarch method to print a single AUXV entry.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=04259343812d59596f67aaceb4af081b2842214c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3734>

Commit(s) tested:
	3350c5f5de3d2e62dd9de2a76cf2d5d8728d2600

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Create a pseudo section for the ELF AUXV core dump note on FreeBSD.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=451ad423315a0b6a89aabff4f6b8a892e2d4f5ab>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3733>

Commit(s) tested:
	7697fc9ec3a970f05abb836107653c46ada466ad

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Fetch the ELF auxiliary vector from live processes on FreeBSD.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c23a8c6e424420aa4ce073246f32d706a8c86aff>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3732>

Commit(s) tested:
	aa1ed4a93a2eb0fb90d274c15288f3aad1791f60

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Add elfcore_grok_freebsd_note to parse FreeBSD ELF core notes.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5332bda5ccb4f29ae2c32cde98a3881ca10baf91>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3731>

Commit(s) tested:
	b00f86d0720d2cf44f3edb6101682074da1abe5d

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Add constants for FreeBSD-specific auxiliary vector entry types.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=21772bfb2079bedeea121d52efa0bda7073a4d30>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3730>

Commit(s) tested:
	08ce1d723ea3360a8ae52a4a4bd395ec984563eb

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	fix undefined reference to bfd_link_plugin_object_p during link

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2a359176e87fc81b8d3382afe2246f2f9276486e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3729>

Commit(s) tested:
	9cc0123fea25379a1d57b700c078c7a9d0992f61

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	MIPS objcopy --rename-section fix

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4803c14c6ea78660a5e470666a76a4c248985456>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3727>

Commit(s) tested:
	56618e20bc50e55b49ed224df2a2a7e0840056fe

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Move filename extensions into language_defn

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fab1e46f671d531e8429481214260baca32f8f7a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3726>

Commit(s) tested:
	3fcf0b0d5a8cf04da4b4210121e7276ca1f20101

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use VEC for filename_language_table

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=287e3498c4da8c180aa79309429367563d917989>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3725>

Commit(s) tested:
	0c72ed4ca21e7a9f78f19179584f3886bf463689

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Make gdbpy_parameter static

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=aee295952dfaa31e1681ab34e4035a7d599e06c6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3724>

Commit(s) tested:
	17621150cc18737f0a80314cfd2f884b0c2e44b5

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	PR gdb/16483 - simplify "info frame-filters" output

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=41e43acf106013295fe982fc0f73ea400ea3d96e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3723>

Commit(s) tested:
	ce440d638d271d76cc491bd22dc34f6a5760140e

Author(s) (in the same order as the commits):
	Graham Markall <graham.markall@embecosm.com>

Subject:
	[ARC] Misc minor edits/fixes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a7a6bf3459e434efd3e3846feeaea3cc9acb829b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3722>

Commit(s) tested:
	6fd3a02da5548c71ff469f978444ef6c3af18783

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Add support for yet some more new ISA 3.0 instructions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c6c1260adfc1660ebda5cc1e028461808229f1a2>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3721>

Commit(s) tested:
	6b4778968b298715ba78208bf047d72243961d49

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	addmore extern C

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=50d1537cd651d5c2b13e6541f70f2dc4524a66ca>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/continue-pending-status.exp: no thread starvation
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3720>

Commit(s) tested:
	6edaf4d75b45ff08d7296095506904663b8f0576

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	tilegx: move TILEGX_NUM_PIPELINE_ENCODINGS to tilegx_pipeline enum

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5eed639626144a5ca855ddefc5cb770437319ff1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3718>

Commit(s) tested:
	04d59df6f311bcc20d74ada64a5e15a4bbb40026

Author(s) (in the same order as the commits):
	Walfred Tedeschi <walfred.tedeschi@intel.com>

Subject:
	Improve user experience in printing Fortran derived types.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0b21ca9488e2f18ad1912d15b1d37153b288505c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: no thread starvation
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3717>

Commit(s) tested:
	bdd582dbf14f12998a0003b5aa772d7868bc3dc7

Author(s) (in the same order as the commits):
	Graham Markall <graham.markall@embecosm.com>

Subject:
	Arc assembler: Convert nps400 from a machine type to an extension.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f8c08374fcf957a9eb7cdcf886ecb46811aaa372>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3716>

Commit(s) tested:
	782c112285467b906296b020f8fce3fb76cc5bb5

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	S390 gdbserver: Mark local funcs/vars as static

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d822a6886f422854e0d7d8a18b3d641fb893d4d5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3715>

Commit(s) tested:
	34a60ddbad3b76d8f327250527cf4915839943d7

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	S390: Fix typo "s930" -> "s390"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a751bae8b255424e9aa9d0f3e78e03eea2cc54c0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3714>

Commit(s) tested:
	ac69f7863a6b5dbd1792356275de437371b8c879

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Add "new-ui console" tests

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6b8f66ee2c52bd80dace4f20afd35a44673456c8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3713>

Commit(s) tested:
	49940788ab38b9d58c663cf38855f29c0ebb1b55

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Always switch fork child to the main UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3b9509698e1f767c0f644b530020f1661ea1f041>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3712>

Commit(s) tested:
	ef274d26b57336b3baa5bb0ae93b49178bc45631

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make mi-break.exp always expect breakpoint commands output on the main UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f7e4267131b25d726f46346b91ca7223117ef03b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3711>

Commit(s) tested:
	468afe6c5fc9c80b8c175f3f13702ffaa6308400

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Send deleted watchpoint-scope output to all UIs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ea947976199c486e60be5a38745972d626bfc8ca>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3710>

Commit(s) tested:
	51f77c3704a6e5c28fdcdd6d6e0aeb97ebdb343f

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Add testing infrastruture bits for running with MI on a separate UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=bd4206ce98ea90ad38bef7ef3cc3c40d57b356de>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3709>

Commit(s) tested:
	86f78169c82095eced3a4d1b30f8e002ec841d79

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	[DOC] Document support for running interpreters on separate UIs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=693cd4d25c33f27585310e021fb7e4ccc85b84f5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3708>

Commit(s) tested:
	60eb5395fa7a7b8e3cd1841e38b6d1a0c16be0d0

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Add new command to create extra console/mi UIs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9c42125c5b49d35d746cf9c3cd0a185667eae462>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3707>

Commit(s) tested:
	268a799a454ce862f516ff2215290fae08eca7fa

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make stdin be per UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=732bf8316b0a7f873c1714279f355f6ca6113d4f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3706>

Commit(s) tested:
	07169ff772077f566c6540f623d7d609babc4c81

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Handle UI's terminal closing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=56cd08fb720dbd1882ca8e6682f7387d6db93ecb>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3705>

Commit(s) tested:
	98d9f24ed15c5ca33bff06647d87b85e22e586d2

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make main_ui be heap allocated

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=31bbdb36d8f7c5061fdca1fcff6f25e86c99a373>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3704>

Commit(s) tested:
	eaae60fd9421cd055c88584bf783942888b8c68e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Only send sync execution command output to the UI that ran the command

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=eb096199d940d5b247464c650d8a063014f4956d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3702>

Commit(s) tested:
	26cde2cc30c25ba4d5666ea502db51ee6cb5b069

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	New function should_print_stop_to_console

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=df62497b604f8ace156f15411910ceb7ba9ab8a5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3701>

Commit(s) tested:
	a8836c9358a11055a08d11ecacc5d7c8f6d5e7a8

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix for spurious prompts in secondary UIs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8863bb100650a92295708c04d2bb24876586641c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3700>

Commit(s) tested:
	3b12939dfc2399200f243851fd55d0e392b64165

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Replace the sync_execution global with a new enum prompt_state tristate

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=05c667ae9381c16ad9d1fd90f124e30524ee8553>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3699>

Commit(s) tested:
	dbf30ca3f5fec91671b37592f1a6644a2c36f67a

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make gdb_in_secondary_prompt_p() be per UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=68c23ea61dd26c87c030afcd771c920e06d129a1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3697>

Commit(s) tested:
	9204d6922cb80f34dd799e57f7f0c74bc86e7027

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make raw_stdout be per MI instance

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=174301108f38ad15ceb532b2d9f602b5b2766011>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3696>

Commit(s) tested:
	05beb2750cd51a0ae1e8bb429aacda567acceba4

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Introduce display_mi_prompt

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8eae9d52d497f030aa005eee7ea2a0c3d2f069e5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3694>

Commit(s) tested:
	c61db772bf5dc21bf8e0db9acfa8796804f945ab

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Always process target events in the main UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7f89e9d392d234128fe24288844e96b1c7c68212>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3693>

Commit(s) tested:
	3c216924d6ae534ea6c2f6bdcc4b42238af52ab1

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make command line editing (use of readline) be per UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f63d8f452c43256a896bb5f14ff29f240d98a5fe>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3692>

Commit(s) tested:
	b6dcde571e1a230d12fc483ba6d38a1253ab097e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make current_ui_out be per UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=569316f0f32bd61573ab2c03f55b5348fb8dba34>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3691>

Commit(s) tested:
	23ff98d2fed4a1eaeb815e18cd4169e5aa7aaa60

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Delete def_uiout

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5e3f94a335bebdb8d4cc9ce7ab426e2d7af985a1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3690>

Commit(s) tested:
	694ec099d2fca9e7d47848e8a7fc40ea3aa47a32

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make out and error streams be per UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1a03c0252680880e22e3dcff8c5a8da08fb9a401>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3689>

Commit(s) tested:
	41fd2b0f5d958fe3056da5c7af4032b1b99d726f

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make input_fd be per UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=96197e3aeb404e47843a65b39c7505807cecb724>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3688>

Commit(s) tested:
	f38d3ad186f1820596743a04b7394b0749942501

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make instream be per UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2e81a705f6a91692d456771bd316d84290dca6db>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3687>

Commit(s) tested:
	7c36c34e4c5c9438f17373a72773d741a17dc7b3

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Always run async signal handlers in the main UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f552429164515c538938d663055d4443d1fcf77c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-nonstop.exp: probe for target remote
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3686>

Commit(s) tested:
	73ab01a07dfef77a9d845be2ef87754435eeffa1

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make the intepreters output to all UIs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b65f4f9b13e21066fa3095262aa83556fa3c0b11>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3685>

Commit(s) tested:
	8322445e0584be846f5873b9aab257dc9fbda05d

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Introduce interpreter factories

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f3be33e48295f28c5ff2be5b5659e2427fbaaf94>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3684>

Commit(s) tested:
	cb814510676f7f6c08b329af2f57006fa598b619

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make the interpreters be per UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=602873ff78a5c09e1901dfde2f6f5bd8e9ec8813>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3683>

Commit(s) tested:
	79aa2fe86f105fae162f780f760d655f212eaeb6

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make gdb_stdout&co be per UI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=77b3c9c79dc4f40a0793a8926b58d2c850216d40>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3682>

Commit(s) tested:
	a74e1786ac24d4ef1ce8a92a1ab06c727a462881

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Introduce "struct ui"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=06a3206ffd83bcb475343202ef69afd92a343ce9>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3681>

Commit(s) tested:
	45db7c09c37c9aceb3a7e149a6577388fc566432

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	[Ada catchpoints] Fix "warning: failed to get exception name: No definition of \"e.full_name\" in current context"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0e38980256066449bbb0c2c5002a9d486278a782>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3678>

Commit(s) tested:
	0616a2803812f5c13f8936d281bd71c3d9c09655

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	PR ld/20276: Set non_ir_ref on common symbol

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f88cbe6ec578ad02d1254eaca6229a1e7ec078a1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3677>

Commit(s) tested:
	49f30d83f659591d7d2b14a18dc8308b3fdb8dd5

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Rename bfd_plugin_uknown to bfd_plugin_unknown

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e1be27474b0a9bb4c11b4512764131303273dd83>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3676>

Commit(s) tested:
	233cc9c13af8e8182d0ce5b306526b59f5b11f37

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Don't generate PLT for IFUNC GOT/pointer reference

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=414f9e443b7111562a217c4329e3ef283a0c156b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3674>

Commit(s) tested:
	80c135e55489435f47bbeeb3715b42289c51e30e

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Add support for Thumb-2 long branch veneers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e88c0f58650367ebb0f747569b4ced5ed2927551>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3673>

Commit(s) tested:
	21a770913c24ab085fe66a5274ebe7cf9e031982

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Extend step-over-syscall.exp with different detach-on-fork and follow-fork modes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=aa9c1f87592b287676e6de8e677fe8a819402063>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3672>

Commit(s) tested:
	2e7b624b851c34f6bc2ab75fcbc94db75f72eb3a

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Handle reinsert breakpoints for vforked child

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=99be408b3b224ae27ba4ae6f7cd816af59b84ce5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3671>

Commit(s) tested:
	8a81c5d7a7cc3ec4d60032d2a911d2f6c3eb8328

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Delete reinsert breakpoints from forked child

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a78f149fa07f33b872b7348939162489678cf7ef>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3670>

Commit(s) tested:
	f50bf8e5153e3cdddd1ad5d3f7d16f2b4e5adb3c

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Step over exit with reinsert breakpoints

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f531ced4c410472f892c23d8b742e20438e7a84f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3669>

Commit(s) tested:
	8376a3cbf73ca8b623db1daa8f9c49fb83ac54bd

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	More assert checks on reinsert breakpoint

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=07cb6df3eb886d7ed314f78e95a169cbb1a8b0e8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3668>

Commit(s) tested:
	f79b145de30d6eaafc1f3f5b2aa913519fcd311f

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Switch to current thread in finish_step_over

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9207fe707b0e12613595bdfbbfbbce71dcc84ecf>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3667>

Commit(s) tested:
	a28d8e5037333291991f7b0036b273e8ca1ffc34

Author(s) (in the same order as the commits):
	Yan-Ting Lin <currygt52@gmail.com>

Subject:
	gdb: new AndesTech NDS32 port

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5cc59909959273156d156cb020e2619b5c49e7bb>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3666>

Commit(s) tested:
	96074adc6a780c7984645e3e42434be368974737

Author(s) (in the same order as the commits):
	Jose E. Marchesi <jose.marchesi@oracle.com>

Subject:
	opcodes,gas: sparc: fix rdasr,wrasr,rdpr,wrpr,rdhpr,wrhpr insns.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e0f4bd40c31a790408e6e59efa4dc29994911b27>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3665>

Commit(s) tested:
	7a10c22feb4dfb7e56855033d579338a6258722d

Author(s) (in the same order as the commits):
	Jose E. Marchesi <jose.marchesi@oracle.com>

Subject:
	opcodes,gas: adjust sparc insns and make GAS aware of it

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9817154a1557ded63cdf38a925c791d032046386>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3664>

Commit(s) tested:
	4f26fb3a1b1369a044ac642d1e82bf6fc6dfa9d9

Author(s) (in the same order as the commits):
	Jose E. Marchesi <jose.marchesi@oracle.com>

Subject:
	bfd,opcodes: sparc: new opcode v9{c,d,e,v,m} architectures and bfd machine numbers.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8de90249e7b6b7dcc99c15a0fa62f1b1d7c8399e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3663>

Commit(s) tested:
	bf52d7c72035679e6b3ab601133c56a4388f4dc9

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Don't check undefined symbol for IFUNC reloc

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8490537cc4a8be05583267ac867789b68b9b31b3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3661>

Commit(s) tested:
	081b1afe5a8cfa02bf3b3cdefb80c266705c17d1

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Skip relocations in non-loaded, non-alloced sections

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=683dad84e92eafbbd6c58da93c2cb8843d8a45ea>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3660>

Commit(s) tested:
	4c23f2ffa8fbd467bca51956130a1f30cfe34371

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Check SEC_ALLOC before allocating dynamic relocation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2660a540b15ddb763283a07e177f3bc4cad46ec5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3659>

Commit(s) tested:
	3ee6e4fbec4a4e0451f20efce50acb720e921a9f

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix simple gas testsuite failures.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f5f1ba73244687d8dcc06b17e668af176bd01f4e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3658>

Commit(s) tested:
	02f3be19f6fca3a46794f8f32350cc090ac38d0e

Author(s) (in the same order as the commits):
	Andrew Burgess <andrew.burgess@embecosm.com>

Subject:
	opcodes/arc: Fix extract for some add_s instructions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=07933621a8da4d65fb9adef42a907344461c4677>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3657>

Commit(s) tested:
	31eef93e717c59975b3e6f37619ab956302ca37a

Author(s) (in the same order as the commits):
	Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>

Subject:
	Fix PR ld/20254

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1405d31a7a86f5958999d71141d35463950799dd>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3656>

Commit(s) tested:
	4bf5402d913e9a5d17d9ffb8701dbd054e1d158c

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Remove unneeded checks on type lengths.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b35b78a0ee7b58f9f4445a530364daef54d91aa1>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3655>

Commit(s) tested:
	683cd65eb4787e3e2921076699e0ca9b00762df3

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Pass a NULL pointer as the last argument to find_pc_partial_function.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3421910b498c57631388110cd77bd4673d20d3f5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3653>

Commit(s) tested:
	99a54ef6f705eedb20f8f4baf3fdd47cc5ca8a92

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Change the size field of MSP430_Opcode_Decoded to a plain integer.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7c66e8cfa849e2687e18fbf8ac83a604d9313815>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3651>

Commit(s) tested:
	897463b12ba936df7d2070755eaac94f87fcedfb

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Fix elf_x86_64_reloc_type_class

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=52553b1d91f911b4ca09965a989c88f3328f082e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3650>

Commit(s) tested:
	28215275a6bbb7c4b4c2d683a1d94fead7dacc35

Author(s) (in the same order as the commits):
	Graham Markall <graham.markall@embecosm.com>

Subject:
	[ARC] Add ldbit for nps

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=757d4d1cafd79ccb7eb13ab478eb1ae01a3c85bb>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3649>

Commit(s) tested:
	9ba75c884776383174cd894948bd8b3cbca62897

Author(s) (in the same order as the commits):
	Graham Markall <graham.markall@embecosm.com>

Subject:
	[ARC] Add deep packet inspection instructions for nps

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=09ef7a8cd3065135b20207ab4ea583098ff3304f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3648>

Commit(s) tested:
	14053c1903cc0e4f0130570f61aee2825661cd7d

Author(s) (in the same order as the commits):
	Graham Markall <graham.markall@embecosm.com>

Subject:
	[ARC] Add arithmetic and logic instructions for nps

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ed7acb9b15cc6ba6ec4740b4e73a9e0daea426b7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3646>

Commit(s) tested:
	3860d2b4b72feeef4cf045c6c9907a0476f46f3d

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Delete bfd_my_archive macro

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3cc4f87df8371482ffe6f142719de3f4a2db9931>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3645>

Commit(s) tested:
	b0cffb47671ffbaac559c1f17a9f248256ea6c42

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Set my_archive for thin archives

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8ec5d0a87460620a10619f578ad87cedd74752d7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3644>

Commit(s) tested:
	712ec27916b5604d29d928dec060fd1ba0fd9edb

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Add the GOT base for GOT32 relocs against IFUNC

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9a8caca52dda7812ba4a5c922da34dd5fd4b0d54>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3643>

Commit(s) tested:
	ca8c86efe7765262e25ebb08004012ba2fdadf52

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Add 2 i386 tests to call IFUNC functions via GOT

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=62e0b933900b8c4aa7e04ea7e76316ba1b562084>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3642>

Commit(s) tested:
	0c9663cbd41c27a8e20ca88a53ba3deae374f1d8

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Update outdated comment about o32 R_MIPS_PC32 reloc support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b3cb112b9784007528ac2caef1c37c13b52ad5f5>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3641>

Commit(s) tested:
	815dc1bcdc1de926bfbb63fb15e0725c9bbc7671

Author(s) (in the same order as the commits):
	Claudiu Zissulescu <claziss@synopsys.com>

Subject:
	[ARC] Fix condition.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b2bb2efd9fbe560c5c38801c1dec492e811b351b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3640>

Commit(s) tested:
	cad8e26d2a2c7cee04954624fbaf91f03eec50ec

Author(s) (in the same order as the commits):
	Andrew Burgess <andrew.burgess@embecosm.com>

Subject:
	gdb: Use UNSUPPORTED not XFAIL for unsupported target features

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=63a8fd7665074c647f71ba387068eae780304b37>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3638>

Commit(s) tested:
	2ab2f40d58e6ad530667b018e42dd71519556f1b

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	[ARC] General bug fixes

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ebc3a9dd957f5ce674093b8ecfd6d5581bc1c732>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3637>

Commit(s) tested:
	0f7f3789ca97ecaf0c4169c6d82e205f69fa0580

Author(s) (in the same order as the commits):
	Cupertino Miranda <cmiranda@synopsys.com>

Subject:
	[ARC] Generate DT_RELACOUNT.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e9dba150ad6341767d5c5aa2a8bf138116eb0699>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3634>

Commit(s) tested:
	74d7f0aa5b1e27da215349fb32337e1d83aca7d7

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Subtract GOT base only with a base register

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=bff2be03833c1e33b2a12f5f94d7d863c1311338>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3633>

Commit(s) tested:
	0eaf2e1b589472d635e85d2ce708faa35a23a90a

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	sparc-coff writing uninitialized memory

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c7004ef44af714f1c9fb376dbc19648e47f63db8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3632>

Commit(s) tested:
	ef53be89160126f2fa5dec8f1ec3bd6d99fb0681

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Use size_t rather than bfd_size_type

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b469f0b1785c2071f6a36c0f8c5c4f4eee3b8a7b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3631>

Commit(s) tested:
	695bfa52ccf22058e371828c3636a3d74424ec5b

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Constify arch_type and friends

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=76112a78d7ce2bd8d29562c28b4ae6e70d35b5a9>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3630>

Commit(s) tested:
	347dc1025db1c0acf616ab6520c3f36448f25e8b

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix PR rust/20110

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f1ebf79278dffb62a0228de00dd52b3ed3a53f6d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3629>

Commit(s) tested:
	edef7b8cf3d811ce8630591dbed1257ba16164ff

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix rust-exp handling in makefile

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=49cf3b9282afb5d5e2bc6cdab818189e5fb47d4f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3627>

Commit(s) tested:
	5e13cf25436bf72d851d81f132fcd49b0c636607

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	Fortran: Testsuite, non-local references in nested functions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9b66930afc48ff115104d5f4b002f6ee3f5c11a3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3626>

Commit(s) tested:
	bb556f1facb86cdd1591d490f2d2d670bdd5a1ee

Author(s) (in the same order as the commits):
	Toshihito Kikuchi <k.toshihito@yahoo.de>

Subject:
	Add negative repeat count to 'x' command

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=448f81228a5a2af98f89a10857543311fd07d658>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3625>

Commit(s) tested:
	c040f3fb55315f06ceb9e6de6ac167a95a445ace

Author(s) (in the same order as the commits):
	Toshihito Kikuchi <k.toshihito@yahoo.de>

Subject:
	Add myself as a write-after-approval GDB maintainer

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ea62237ab1d11bb3fa5bd4653f0463f7365f7557>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3622>

Commit(s) tested:
	1857fe72aff6f254217956d141bff4b9ca454bc5

Author(s) (in the same order as the commits):
	Denis Chertykov <chertykov@gmail.com>

Subject:
	Print symbol names in comments for LDS/STS disassembly.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=72f5eaba64a0c76d6951ccf1606bf9d3d40816c9>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/interp.exp: can list sources
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3620>

Commit(s) tested:
	6eaa7fb59b32beaca017abf139a67bbe87592d9b

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Support i386 TLS code sequences without PLT

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=29ecce2cea06ddec07acfd53b78fec515f7d7c8d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3619>

Commit(s) tested:
	3b67f09464f771466473e64d44aa258f832d8b2d

Author(s) (in the same order as the commits):
	Marcin Kościelnicki <koriakin@0x04.net>

Subject:
	bfd/s390: Misc minor fixes.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=abf3d79a2e7e32fd94ba2aaa7346ec3127833a4f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3617>

Commit(s) tested:
	161db2790500827b74ef835ebe515dce04021316

Author(s) (in the same order as the commits):
	Andreas Krebbel <krebbel@linux.vnet.ibm.com>

Subject:
	Fix PLT first entry GOT operand calculation.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=700fb2c49696412855a69efb7b2886197d846d8f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3615>

Commit(s) tested:
	2091da296fd563f62d856dcb5a049a63484ed65e

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	Frame static link: Handle null pointer.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e480423611e333f550a836e4c4fed9e2924f93bc>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3614>

Commit(s) tested:
	4d1464f294405a064d84e3d4f15c1ceff3639add

Author(s) (in the same order as the commits):
	Matthew Wahab <matthew.wahab@arm.com>

Subject:
	[ARM] Add command line option for RAS extension.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=648481289dc7271bdfc6a3ed0222182557ca11b8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3613>

Commit(s) tested:
	38b022b4452f996fb5a8598f80d850b594621bcf

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Add method/format information to =record-started

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=646c687bd46b09e5baf8dbcd305859f82c279c2f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-reverse.exp: Turn on process record
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3612>

Commit(s) tested:
	e2cbcd9156d1606a9f2153aecd93a89fe6e29180

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Support x86-64 TLS code sequences without PLT

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1be2274c67c99352e2824797b3f92bba86b2ad82>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3611>

Commit(s) tested:
	2ac27cd3c16ad828f96991f8f7b83a4bc10cae6c

Author(s) (in the same order as the commits):
	Christian Groessler <chris@groessler.org>

Subject:
	Add z8k ld testsuite and fix range check in coff-z8k.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=efc6044d32ed02f9568758b2d31867b8f92e7c5a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3610>

Commit(s) tested:
	026122a670440bc51266f8e013e5c5877c19b54e

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Re-add support for lbarx, lharx, stbcx. and sthcx. insns back to the E6500 cpu.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8b20f33e1d359e0cafb4c303f1e59b287c885f1d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3608>

Commit(s) tested:
	0ae534d2cfef358bcde3166ce3a29faf85bc632a

Author(s) (in the same order as the commits):
	Jon Turney <jon.turney@dronecode.org.uk>

Subject:
	Fix C++ build for Cygwin

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3b952a78e3c193afbc07768726df9fdfca14b491>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail;hb=b49a91b>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<http://git.sergiodj.net/?p=gdb-xfails.git;a=blob;f=xfails/Debian-i686/xfails/master/xfail.table;hb=b49a91b>

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3607>

Commit(s) tested:
	1b40ec0559f4b24ccdf6b073610c526c4aa33c4d

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix PR python/18984

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=af9887878516a0214b374fa197f000cbb0c21437>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3606>

Commit(s) tested:
	99914dfd71d74bc700bb6d15647895ac0c8cc8e1

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Add "arm_any" architecture type to allow -m option to various binutils to match any ARM architecture.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=24da6963dffce9752e2dfdacc834aafd5cb16528>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3605>

Commit(s) tested:
	193bd37899bc7e301b195929bc7e335bea03d4e4

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	mi-memory-changed.exp: Fix filename passed to untested

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=42bba43a8b63163699860c64e58f572c1f671388>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3604>

Commit(s) tested:
	4ad0bb5f3a5b2d03079819cf419b174a762c2d52

Author(s) (in the same order as the commits):
	Vineet Gupta <Vineet.Gupta1@synopsys.com>

Subject:
	Allow ARC Linux targets that do not use uclibc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a815cb5544a6b5e56a5d2d5b5c03be90729a9d12>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3603>

Commit(s) tested:
	3ddf1bdd423a127564d5d13cabde8863431576a3

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Replace data32 with data16 in comments

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6c6837d14fc5cb3439f438316df164a3a48db90d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3602>

Commit(s) tested:
	4eb6f892502bad1ec4e1828d0140959bb004a3b6

Author(s) (in the same order as the commits):
	Andrew Burgess <andrew.burgess@embecosm.com>

Subject:
	Add support for 48 and 64 bit ARC instructions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c7a3d3dca30a8ac547f8d04ee7b572d9f50653aa>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3601>

Commit(s) tested:
	5b677558bc6c7b2477bb33c709e6017e68e7ae8c

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Revert PR16467 change

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d1012977095938b96e94b6cbdee13d577e72305b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3600>

Commit(s) tested:
	1fe0971e41a4097610862acabf54a896695fe834

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	add more extern C

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0926191f30763ddcf1eebcb363fe3ee6daeebceb>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3599>

Commit(s) tested:
	885a10879eea3cf7ccbb324109a56f0bc391dcfa

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Add new Serbian translation for the bfd library.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ea5289fbaa95232b71a2a309a8027cec9d4a656e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3598>

Commit(s) tested:
	bb7c96deb1a14ef7e8b51d5339a65a8064515c78

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb/remote-fileio.c: Eliminate custom SIGINT signal handler

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=487e69eb43d11ad1c6ad96f7468c7baec657cfd3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3597>

Commit(s) tested:
	315f180f2f0a59af561180e4ed9387f4c7bada78

Author(s) (in the same order as the commits):
	Graham Markall <graham.markall@embecosm.com>

Subject:
	Add support for some variants of the ARC nps400 rflt instruction.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3727173910fa0be44914d34618102f87bd50d4c3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3596>

Commit(s) tested:
	51403f74d96cc69f391fbd31389a9153a230b431

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Add xmalloc_failed() function to common-utils.c in to avoid the need to link in libiberty's xmalloc code.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4d3ec7275e77cdb24f313ebf6187cd57733f18f8>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3595>

Commit(s) tested:
	e3b5daf9f735999259c5a8f68b422850c59897e5

Author(s) (in the same order as the commits):
	Markus Metzger <markus.t.metzger@intel.com>

Subject:
	infcmd, btrace: fix crash in 'finish' for tailcall-only frames

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f647fab21a3f5564d97beb344ab8f86c41c7b912>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3594>

Commit(s) tested:
	03d73f1fd9d89d89bdd021cad26693e4f6abc07a

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Wake up interruptible_select in remote_fileio ctrl-c handler

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e5c66004c07eb702ddf47c8892b99197b716ddaf>

*** Diff to previous build ***
============================
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -function myclass::myfunction
PASS -> FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction
PASS -> FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -label top
PASS -> FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -line 3
PASS -> FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -label top -line 3
PASS -> FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -line 3
PASS -> FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::operator,
PASS -> FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function 'myclass::operator,'
PASS -> FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function "myclass::operator,"
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3593>

Commit(s) tested:
	a2b5fccc630a7cb7e1c241e5249bf6e8917d917d

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	sh: make constant unsigned to avoid narrowing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1aa37b80dba7823f34e3bf5b8c1658ae29bb7de3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3590>

Commit(s) tested:
	3326303bf5ae4c92f2fbbff387ce231a16c1c8bf

Author(s) (in the same order as the commits):
	Martin Galvan <martin.galvan@tallertechnologies.com>

Subject:
	[PR gdb/19893] Fix handling of synthetic C++ references

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=76989fa75b03208a4a4b2f3522f4a217c1e4b05e>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3589>

Commit(s) tested:
	c12969f8b53659f0d70b5e049c49b97a96826a3f

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Don't needlessly clear xmemdup allocated memory.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b89942ffffd6196974f3b41a5418a78c91c60a6c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3587>

Commit(s) tested:
	2320162a6219c664a8da2e2ff68b08d6f6c2ffcc

Author(s) (in the same order as the commits):
	Antoine Tremblay <antoine.tremblay@ericsson.com>

Subject:
	Add variable length tests for emit_ref in trace-condition.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=13ccc7e90773a736e912aee68491f41adcbe9291>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3586>

Commit(s) tested:
	a781823347ec9cd84e5ccc0bb8ddde48f8d302b6

Author(s) (in the same order as the commits):
	Antoine Tremblay <antoine.tremblay@ericsson.com>

Subject:
	Add emit_less_unsigned test in trace-condition.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3245fff455f8af1c09070ea85acbb7417fa0be8d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3585>

Commit(s) tested:
	0d33646690c2e88624cd9646539d63d4144d03e8

Author(s) (in the same order as the commits):
	Antoine Tremblay <antoine.tremblay@ericsson.com>

Subject:
	Move trace conditions tests from ftrace.exp to trace-condition.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5f41cbc7dab50ebf109f7df59b9f6f953313659b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3584>

Commit(s) tested:
	7faeb45ae36426b827c49457cf7186d73756cccc

Author(s) (in the same order as the commits):
	Antoine Tremblay <antoine.tremblay@ericsson.com>

Subject:
	Add counter-cases for trace-condition.exp tests

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d62e961b8629c1d8b6e2fb0edcc78c57bbaa1ac0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3583>

Commit(s) tested:
	e385593eef98ac92be57159e141f4b805dadbbb3

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	PR 15231: import bare DW_TAG_lexical_block

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f1b4812569526dedd63e130ed1a48b87eebfd15c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3582>

Commit(s) tested:
	3a2b436ae9958a1029545c03201b7223ff33c150

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	Code cleanup: dwarf2_get_pc_bounds: -1/0/+1 -> enum

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6c0d0157afa10b0e55c63f6f082b34664e0bc036>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3581>

Commit(s) tested:
	aab3c527d779a8e833a469203336afcc17512559

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	NEWS: QCatchSyscalls: simplify

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d9a306f929f2532284575754867a3f2299b2d4e7>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3580>

Commit(s) tested:
	c64e0f6165537efda112a9744e588f4ecac8ca41

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	NEWS: Remove empty line.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d07c0ad11a86ce629377c574649a3635d58db6a3>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3579>

Commit(s) tested:
	144b71e2a88e02d0b54d4f09cc652f353b46e455

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Add .noavx512XX directives to x86 assembler

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ee133b2e7b345edfb06cd4ec6f31fb957fcbdf37>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3577>

Commit(s) tested:
	99aefae6818be07a77739e0366121f2032916d9c

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Correctly handle `bfd_reloc_outofrange' with branches

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9fcf061ad879d649f87f1b15cc9b155ed3552080>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3576>

Commit(s) tested:
	7743482350c9c97484a429070db7d994a643a9eb

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Enable local R_MIPS_26 overflow detection

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=782b63e583017c02c9ed4c9f116441436cf33496>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3575>

Commit(s) tested:
	1a72702bb30ec3f94627cfcae684823b413f20b9

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Return void from linker callbacks

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=feb11e80298a8a86aa3173d747d3acc6f8814a0c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3574>

Commit(s) tested:
	bc27bb0573a5e1ce1a6365fc06aeab9bd891fc3a

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Include the addend in JALX's target alignment verification

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=651b6cf0cf254d02c60541485a56669a3a774d24>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-nonstop.exp: probe for target remote
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3573>

Commit(s) tested:
	ceab86af75e9870ecf2da772a0d867ca12521a24

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Fix section symbol name fetching in relocation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c41a56aff2f7d1e79eb3a8f7a269b778219adbc6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3570>

Commit(s) tested:
	e92bae62606702c1c07e095789ffed103e0e34c5

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Replace CpuAMD64/CpuIntel64 with AMD64/Intel64

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e0e40fad19e9b58feb0032a7438354dae8cfd96a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3569>

Commit(s) tested:
	e89c5eaa7208f06e927a79facff0316f4e550f6f

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Correct CpuMax in i386-opc.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8742c63db6275a7d40b4de18b8e0c49c3d4a3c09>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3567>

Commit(s) tested:
	77d66e7b303f6fa65dd2ca4abce6393d6ea70a8f

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Improve the MSP430 disassembler's handling of memory read errors.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=66a13e54034599781ee1437b57d76c6d5012574a>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3566>

Commit(s) tested:
	51415b9f309443261016ad1b63b9e350bbe3903d

Author(s) (in the same order as the commits):
	Andrew Burgess <andrew.burgess@embecosm.com>

Subject:
	gdb: Forward VALUE_LVAL when avoiding side effects for STRUCTOP_STRUCT

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5ad236abeae8087f227c311969df99436abe7460>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3564>

Commit(s) tested:
	19dfcc89e8d94526f011242041b700ede8834996

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Add support for new POWER ISA 3.0 instructions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2c0747d1e285c28d7f79750c0e52302bdd13ee26>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3563>

Commit(s) tested:
	ed53407eec9eba3b55a3a00fb7eaa7eddbf01363

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Don't stop processing on `bfd_reloc_outofrange'

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=af465cfeb1583283e53a088f9baaf7c8ce3fe099>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3562>

Commit(s) tested:
	94740f9c4b20ec88a5e33823a4da13d6da311a22

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	metag: add extern C to header

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=00f46415e7069b21ddf85f17a02516ce62393e7b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3561>

Commit(s) tested:
	de341542a60f7d3a80cc339db7d341b615cfa52f

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Report `bfd_reloc_outofrange' errors as such

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=bbf3d2158516ea68b5dfb5d74da06b7733f1bd4f>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3560>

Commit(s) tested:
	f3ad76370f8c79e4ae74ca6826e23bf417d5283a

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Enable VREX for all AVX512 directives

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8b4fabeed0f74e28993700f79bc18ed3274172f6>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3559>

Commit(s) tested:
	f1360d5830fc7695cd26214257c62f34b73070c8

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Enable VREX for AVX512 directives

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2e5641e69241d589de5bf07c8a5707c5ce8c1a59>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3556>

Commit(s) tested:
	293f5f65435c4d309cbf463e941a8bd5ae50c02d

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Reimplement .no87/.nommx/.nosse/.noavx directives

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2511e416d1a79810482f58320a49783d0b60f856>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3555>

Commit(s) tested:
	e6cc316af931911da20249e19f9342e5cf8aeeff

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Enable 64-bit archives in ar and ranlib

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=58dbe54e478e0b25b85cc09ccf0d3a8dbd5d00ae>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3554>

Commit(s) tested:
	b95a0a3177bcf797c8f5ad6a7d276fb6275352b7

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Skip an archive element if not added by linker

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=067f1a4a387166e42666a642d6f0d0a5843d1ffc>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3553>

Commit(s) tested:
	7bd787e8774f96712d2e15a4094f094e00ff45ba

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	fix spelling of HAVE_LIBPYTHON2_4 in py-value.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a60af6a3489d8c064a04c7bd37d90bdb8496cc05>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3551>

Commit(s) tested:
	8b70175dfa76c97e28d83cd09f3604933a7c05f5

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	Fortran, testsuite: Fix duplicate testcase name.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=461776f3c4f0ab0437176c627d7890d546434dcd>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3550>

Commit(s) tested:
	86d8a84882643db4d8c28cea8e4a358465cb11f5

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	Fortran, testsuite: Add testcases for nested structures.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c3ef6e5e53f2bf87790c50f0b1ae167e5cd9d77c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3549>

Commit(s) tested:
	e188eb36215c031304aa7d2630447e2d0726adf5

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	Fortran, typeprint: Decrease level of details when printing elements of a structure.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3e07a5c81343882e36e600277a5918b89547e890>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3548>

Commit(s) tested:
	9b2db1fd27cea1323a7ae0beb9399c8e1c4a3741

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	Fortran, typeprint: Take level of details into account when printing elements of a structure.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e0bdb64ce8da4280171407dc6caf78383bd64aa2>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3547>

Commit(s) tested:
	72b1705502a891e07d40ad215146c71193920801

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	Fortran, typeprint: Fix wrong indentation when ptype nested structures.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ffd5f997a3fe30fb976365d74e48e1f0aaf9b23c>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3545>

Commit(s) tested:
	7db9a74e9f03427ed2844a17cebecc5e793f38ef

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS/BFD: Unify `bfd_reloc_outofrange' error reporting code

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1e381b1e195057d21d3bb9264a0582e13c87523d>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3544>

Commit(s) tested:
	ddae946278bf4269370f7d945732485ad13469fa

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix PR python/17386 - add __index__ method to gdb.Value

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a6487f2a75da3323c31e3e483802365d7bcf805b>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3543>

Commit(s) tested:
	e2b7f516fc688975ea22ad3cf2066c6972454fdc

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	add nb_inplace_divide for python 2

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d165e39fafae721273b1d9ceca69cb95b82ce8fd>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3542>

Commit(s) tested:
	1957f6b89f3db02d51e3e3361de6af073a03f19d

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix PR python/17981

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2a0f26b0d89e0895af6f02eb4a933ddf047ad298>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3541>

Commit(s) tested:
	026a91747567565bf2956fae98fed6a958151aab

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR gdb/19828: gdb -p <process from a container>: internal error

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5b1729204eb12731f818026401e79ef17cc82229>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3540>

Commit(s) tested:
	72b049d38ce85c51fc9f97ee64b00a47be5ebe94

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Make gdb/linux-nat.c consider a waitstatus pending on the infrun side

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=937934e98ba7d0e5e9900e4549993eaac6ecada0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Complete list of XFAILs for this builder ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3539>

Commit(s) tested:
	774113b02f41ded4d9ba4d18571ee5024312ad1b

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	[Linux] Optimize PID -> struct lwp_info lookup

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b318280c677f73c581008d1f7e260458078889ef>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Racy tests that are not being considered ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3538>

Commit(s) tested:
	1ad3de988d2f41c72de66613c68ed78507a3abbd

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	[Linux] Avoid refetching core-of-thread if thread hasn't run

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7bc90d4e34a93053cd3ba93b1448f5d3edd68f81>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Racy tests that are not being considered ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3537>

Commit(s) tested:
	95e94c3f18aaf34fadcd9a2a882ffe6147b9acc3

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	[Linux] Read vDSO range from /proc/PID/task/PID/maps instead of /proc/PID/maps

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5cd2d71208ddf2cb493388bebab202dc791763b0>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Racy tests that are not being considered ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3535>

Commit(s) tested:
	e70a7231e6347212258d43d2a46a20f7f7584386

Author(s) (in the same order as the commits):
	Francis Ricci <francisjricci@gmail.com>

Subject:
	Fix syntax error in annota-input-while-running.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0d35f07e8bfdadce8bb66e6c6c8a1ed85f97a199>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Racy tests that are not being considered ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3534>

Commit(s) tested:
	00a3cb9c7c69cf65fdce73079a445cb379ae7842

Author(s) (in the same order as the commits):
	Yan-Ting Lin <currygt52@gmail.com>

Subject:
	Add myself as a write-after-approval GDB maintainer

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c6a24b007b997d2f558fecf3f5565be825b756a4>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Racy tests that are not being considered ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - reported-by: GDB BuildBot Racy Detector (automatic)
  - number-of-racy-detections: 1 (in the last 30 days)
  - last-racyness-detected: 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3533>

Commit(s) tested:
	b7f28d873c8bb26500e46828d34445cebfab7fd4

Author(s) (in the same order as the commits):
	Jim Wilson <jim.wilson@linaro.org>

Subject:
	Enable R_AARCH64_NONE for 64-bit code.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=dccfa8ed4167fcc2a83a67906089230021ded022>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3529>

Commit(s) tested:
	87789e08e5cb2191af1122ed98af2d6c023b3a0a

Author(s) (in the same order as the commits):
	Claudiu Zissulescu <claziss@synopsys.com>

Subject:
	[ARC] Add XY registers, update neg instruction.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=13acf28e4baa4e44c75cc9537ce75cf86119cc33>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3528>

Commit(s) tested:
	c810e0b87a2084656af944fe269d8c2680ba5469

Author(s) (in the same order as the commits):
	Claudiu Zissulescu <claziss@synopsys.com>

Subject:
	[ARC] Rename "class" named attributes.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d31d8fd0b48d5cfc2baf83269fbb8c93bc8bf239>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3527>

Commit(s) tested:
	ffd19d610b3807bd5e2622440e225adb12a6766b

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Use standard_testfile in gdb.arch/thumb-prologue.exp and gdb.arch/thumb2-it.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=168dd8dee4cba82fc7412092019ff5adea765410>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3525>

Commit(s) tested:
	d0571b9934241e58a5325fc6e09298d0e3396280

Author(s) (in the same order as the commits):
	Gary Benson <gbenson@redhat.com>

Subject:
	Remove unused libthread_db td_thr_validate reference

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0af4cf144887171769f9d6fe4030ad61eef88307>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3524>

Commit(s) tested:
	b43b853577ed4fb6cc19b1faa17e8fbea3c58be7

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Sync config.guess and config.sub with FSF GCC mainline versions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=daeeba84b3095b013295cad8b0e70a5c711addc6>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3522>

Commit(s) tested:
	daa4adae63f91377fe9b3e8d7421a0ceb4a51e26

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Support for dedicated output section for some ARM veneer types

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=48c292c9fab975b50fdd635ca9dbd2f4441b4d1a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3521>

Commit(s) tested:
	37773e7803b370802302719a48c9c46f64c602b4

Author(s) (in the same order as the commits):
	Jon Boden <jon@ubuntubsd.org>

Subject:
	Search for libutil-freebsd as alternative to libutil

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a4d3846c3cb21d2d63baf0d7e148c3114838fbfd>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3520>

Commit(s) tested:
	3d207518c117df7a6c58f20bc2693171b7690650

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	tic54x: rename typedef of struct symbol_

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ccf0367506068040c8061bdf32e6cd2343f3d39a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/longjmp.exp: next over patt3
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
FAIL: gdb.threads/multiple-step-overs.exp: step
  - Failed 1 time(s) in 30 days
  - Last detected racyness at 2016-05-17 22:43:57 UTC
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3519>

Commit(s) tested:
	52bf37dd91e5dd983ed20d1329293d077fe71e41

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Don't check R_386_GOT32 when setting need_convert_load

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5d9930ae94d4dd607c05d974d03bca8c1b235b3b>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/longjmp.exp: next over patt3 ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.threads/multiple-step-overs.exp: step ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3518>

Commit(s) tested:
	17c6c9d9f3e71459edb4b6af5ec75125f0d06f87

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS: Fix the encoding of immediates with microMIPS JALX

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=942934a0384cdae9d0763da909ff425cab38201c>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/longjmp.exp: next over patt3 ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout) ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
FAIL: gdb.threads/multiple-step-overs.exp: step ##|## Failed 1 time(s) in 30 days, last failure at 2016-05-17 22:43:57
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3517>

Commit(s) tested:
	7d4d970973c4735dcdd2a69d645309f167a1d9d4

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Don't convert R_386_GOT32 relocation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0cb90ee67cd659a43662980ede6713d55df42e09>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/longjmp.exp: next over patt3 ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.threads/multiple-step-overs.exp: step ##|## Failed 1 times since 2016-05-17 22:43:57
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3516>

Commit(s) tested:
	606851fbf66c4a9e47c958014579dd363a74ba76

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Set sh_entsize for .init_array and similar.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0a2db547aafe58f722b311dffae941d5d21f1535>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/longjmp.exp: next over patt3 ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.threads/multiple-step-overs.exp: step ##|## Failed 1 times since 2016-05-17 22:43:57
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3515>

Commit(s) tested:
	bfb0d950a58edc4eb1f102174af38a364f4f43f7

Author(s) (in the same order as the commits):
	Andreas Schwab <schwab@suse.de>

Subject:
	Fix invalid implicit conversions from void *

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2c8f380ab8b0e73b9f0a82b93dfea2dc7e39a330>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/longjmp.exp: next over patt3 ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.threads/multiple-step-overs.exp: step ##|## Failed 1 times since 2016-05-17 22:43:57
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3514>

Commit(s) tested:
	3c8adacaf910480e3cda19ac9566133864a781d1

Author(s) (in the same order as the commits):
	Claudiu Zissulescu <claziss@synopsys.com>

Subject:
	[ARC] BFD fixes.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=97e44937ef3ae24e422901244d07f7e8e1eea0ba>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/longjmp.exp: next over patt3 ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.threads/multiple-step-overs.exp: step ##|## Failed 1 times since 2016-05-17 22:43:57
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3513>

Commit(s) tested:
	6b200de0f7a7008f74cde68fe87aa62b7729cd9a

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	Remove unsupported `am34-*-linux*' target triplet

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=46f81f98f18cdbd66dc8807ed2487d0e3df47d0c>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/longjmp.exp: next over patt3 ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.threads/multiple-step-overs.exp: step ##|## Failed 1 times since 2016-05-17 22:43:57
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3512>

Commit(s) tested:
	514e58b726338c24b672d96bd48f8ce8a47f7803

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Correct "Fix powerpc subis range"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=cfeaa3dd547db737a3a264a986e2af27fcf6d512>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/longjmp.exp: next over patt3 ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout) ##|## Failed 1 times since 2016-05-17 22:43:57
FAIL: gdb.threads/multiple-step-overs.exp: step ##|## Failed 1 times since 2016-05-17 22:43:57
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3511>

Commit(s) tested:
	e43de63c8fd11a15d7c6c852747c81664c0beb2a

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Fix powerpc subis range

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0cd6598c4e2114a9f3db8716eb41ef3acae8f763>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3509>

Commit(s) tested:
	9f284bf9da3ecc689405cb7b698c7714acdf1ab0

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Fix ppc64le S-record test fail

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a750983eeac2c788de7e0992dbd02f288cb739b7>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3508>

Commit(s) tested:
	45f4ed92d14ddf891be1470556f53de6c94c8dc2

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix build failure with GCC 4.1.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1eb653a1c5caef067d70ddb0d785b4b366a31b83>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3505>

Commit(s) tested:
	9e8f9b05add4517189d7724ff3ed7c16f7b04daf

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Add mi-threads-interrupt.exp test (PR 20039)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=61850681fcdabbdeb21afdacaa4cfbcfd01c6424>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3504>

Commit(s) tested:
	28addb40c77db5a5873172b62b6b7b43e5e05014

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=bf80950b14133be1f7a1ca4804a456175acb6add>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3502>

Commit(s) tested:
	5049806017a546184b87fc3282a586d686b8d98f

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Updated Swedish translations for bfd and binutils

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=51fa53d57721ea1cdeb99f35c6aa1afdd9b36a14>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3501>

Commit(s) tested:
	7f9919700d0023db7d66fee9f437251a263f5d53

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	elf32-arm.c build breakage

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fda18e37b0a1555d4e96920517f2edbc3ca032d1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3499>

Commit(s) tested:
	61c6156df6e3c638eb3bdb4a6e3d418a43a6eb70

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix -exec-run not running asynchronously with mi-async on (PR gdb/18077)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a8fb4939e12757a232e155c0cc269d9a53faaa90>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3498>

Commit(s) tested:
	01739a3b6a564f6552acf6c01617aa21ab4d8833

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Rename OP_F90_RANGE to OP_RANGE.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b5c87dd27bebbc442c27abb0d3762c7fb9f981c1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3497>

Commit(s) tested:
	0bdfa368bc8dbea2f39706e34306c9b67883bbb1

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Add Rust documentation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=057975ac0f18bd53f3149917fa77ee39697cd895>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: stop all threads
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=continue: stop all threads
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3496>

Commit(s) tested:
	67218854b1987d89593ccaf5feaf5b29b1b976f2

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Update gdb test suite for Rust

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=67315c31de4d9edabdbee05e6b663c96e369143c>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3495>

Commit(s) tested:
	c44af4ebc000f606d16b42224cba2cfe80391d5c

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Add support for the Rust language

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=64a9492b1ca410147631155d5038851685b8aeea>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3494>

Commit(s) tested:
	00272ec4b0cc22c1b9d60d39ce7bf5b2d5512582

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Add array start and end strings to generic_val_print_decorations

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7be0716184808ad308ed9ba903bec4ce47fa8ecc>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3493>

Commit(s) tested:
	dcd1f97951b432032fd0728992b1384064663701

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Add self-test framework to gdb

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=cccb1b27bd92ace3b012e3f4bd790b87cb94ed39>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3492>

Commit(s) tested:
	e4b8a1c839b88c345b82c37c90814a89c7f0c3c2

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Make gdb expression debugging handle OP_F90_RANGE

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=76736d38750e5a78b5fada121f87041e0a5d7b4b>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3491>

Commit(s) tested:
	9ab0bb2a673875ba15d6956f2c587c9c31f40357

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix latent yacc-related bug in gdb/Makefile.in init.c rule

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=017c93ae1b1144f295e7a987edd064d533a98968>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3489>

Commit(s) tested:
	a43942db49b07a457ee4f960d0f118b23641ec38

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	LD/ELF: Unify STB_GNU_UNIQUE handling

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7eb9a02cec46307e6373309bc5734581093ef202>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3488>

Commit(s) tested:
	fcdad592cd1f76046c5e4b7a2b0337e146d1e796

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Use unsuspend_all_lwps

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ef0f116c63dc38fedcf3bb4eb3f23cf7993311ad>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3484>

Commit(s) tested:
	1178da445ad5faf37f9cc2be3aaa69d916f10f62

Author(s) (in the same order as the commits):
	Peter Bergner <bergner@vnet.ibm.com>

Subject:
	Accept valid one byte signed and unsigned values for the IMM8 operand.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=bc778c60effc007324d7f335a3163b4278917616>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3483>

Commit(s) tested:
	2168b2688ae343a61c467450068503295a5e3deb

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Don't convert GOTPCREL relocation against large section

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7a54013ac09b74674bfa5dbe90c9f9b2284cddd7>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3482>

Commit(s) tested:
	4ade44b727ee77adaa9c22719935d012e253a5e6

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Set dynamic tag VMA and size from dynamic section when possible

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b204fc6a4a03c06475bf9b2ea2b31704dcc068e9>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3479>

Commit(s) tested:
	1997c9943a1979a7407f3c70ead92493a799e13e

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	ld -z combreloc reloc sorting

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=52d77aaabc239b25f9fdf0c2688055fe7ddf29da>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3478>

Commit(s) tested:
	8f4f9071ad5fe6076c3554a75d59536e74e6a3fe

Author(s) (in the same order as the commits):
	Matthew Fortune <matthew.fortune@imgtec.com>

Subject:
	Add MIPS32 DSPr3 support.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0fe7220840fe779a389e4e5df67ad5e8a09559a1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3477>

Commit(s) tested:
	a464198b013940745d43cff029330b9e7dda71c2

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	[HPPA] Attach linker created dynamic sections to stub bfd

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3d5090fcff12a3a5ef213397fc74a8d7ec1e5b4b>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3475>

Commit(s) tested:
	4e7fbb34f0546360e86b56dcd32b4d6478662b41

Author(s) (in the same order as the commits):
	Jiong Wang <jiong.wang@arm.com>

Subject:
	[AArch64] Remove redundant tls relax in elfNN_aarch64_final_link_relocate

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2634cbdce510a3709ce05a17a1734a3fbbe1f4e9>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3474>

Commit(s) tested:
	df140a0bc3140bca133cd7ced6e18903db69c396

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	fix up two issues with the removal of unused variables

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=815aa78bd7dd9d7ace0ec9cb0773b79da5bc09dc>

*** Regressions found ***
============================
PASS -> FAIL: gdb.mi/mi-nonstop.exp: wait for thread exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.mi/mi-nonstop.exp: wait for thread exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3473>

Commit(s) tested:
	8bc526963edde8cf8789ce82072d05fd2bcc90c4

Author(s) (in the same order as the commits):
	Alexander Fomin <alexander.fomin@intel.com>

Subject:
	Enable Intel RDPID instruction.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e2b438b9a8f722b86c683bd0af3d29433b76d8f1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3472>

Commit(s) tested:
	4f4faa4d43aeaf5dd0a5fe0aff2fde89df3e5b8c

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Allow veneers to claim veneered symbols

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2fcad33b1d71feee8a5f442dc54ed50466abe18a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3471>

Commit(s) tested:
	39d911fc3c6519799ca1af4365d4b56f9d71ca94

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Use getters/setters to access ARM branch type

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5663f25f58e21057a52b15aa2d539e8bdfe8e2cf>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3470>

Commit(s) tested:
	6bde4c52fb2d49572d365612f222a42b4d316f09

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Allow stubs without associated input section in ARM backend

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=428f92a7fd8de3564267b591d87b5b44d47aa275>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3469>

Commit(s) tested:
	b715f643ef3810bd77d50cc97fe4f7a3116b1556

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Factor our stub creation in ARM backend

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2356952dd4d70a566216c96d724155a1a00f4425>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3468>

Commit(s) tested:
	8d9d9490142a0cd6edb7cfec820a7c8f28b88395

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Refactor Cortex-A8 erratum workaround in preparation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=228cd07babf8527914184766a6a7238432fc319d>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3467>

Commit(s) tested:
	15afaa63f39a44563e49bb3b9fb38ed43e8b48ed

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Add support for ARMv8-M Mainline with DSP extension

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fa7bcaac60fbd00585618912f2482e88414c00d4>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3466>

Commit(s) tested:
	d942732e829030b8eab483dd48b979f8eed7c9e2

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Allow extension availability to depend on several architecture bits

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6d864066663388dbc6fe30d726ac8a5f2694b124>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3464>

Commit(s) tested:
	66a368220cc109070a30ac2bbf24057c8b07a2b0

Author(s) (in the same order as the commits):
	Pip Cet <pipcet@gmail.com>

Subject:
	PR 20059 _bfd_elf_copy_link_hash_symbol_type segfault

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2da2ccc178f7fc8b86f9ec5332cd33254cffbf04>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3463>

Commit(s) tested:
	315350be6598235df12a0190a5a4c21447eead36

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix seg fault objdumping a corrupt binary with an invalid sh_link field.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4ec2a05735353ebe87ccff1af2ae36be1f52444a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3462>

Commit(s) tested:
	9239bbd3a6bf901dba1c0170622c50c78f6d1096

Author(s) (in the same order as the commits):
	Christophe Monat <christophe.monat@st.com>

Subject:
	[ARM/STM32L4XX] PR 20030: --fix-stm32l4xx-629360 fails to create vldm/vpop veneers for double-precision registers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=1ede38cb4ec2ac992d9a201e2fe4c175190836a4>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/commands.exp: commands part 2 in if_while_breakpoint_command_test
PASS -> FAIL: gdb.base/commands.exp: if_while_breakpoint_command_test #1
PASS -> FAIL: gdb.base/commands.exp: info break in if_while_breakpoint_command_test
new FAIL: gdb.base/commands.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.base/commands.exp: commands in infrun_breakpoint_command_test #1
PASS -> FAIL: gdb.base/commands.exp: commands in infrun_breakpoint_command_test #2
PASS -> FAIL: gdb.base/commands.exp: continue in infrun_breakpoint_command_test
PASS -> FAIL: gdb.base/commands.exp: commands in breakpoint_command_test
PASS -> FAIL: gdb.base/commands.exp: continue in breakpoint_command_test
PASS -> FAIL: gdb.base/commands.exp: print value in breakpoint_command_test
PASS -> FAIL: gdb.base/commands.exp: set foo in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: define mycommand in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: enter commands in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: execute user defined command in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: display user command in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: define myemptycommand in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: end definition of user-defined command with empty body
PASS -> FAIL: gdb.base/commands.exp: execute user-defined empty command in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: display empty command in command list in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: display user-defined empty command in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: set value to 5 in test_command_prompt_position
PASS -> FAIL: gdb.base/commands.exp: if test in test_command_prompt_position
new FAIL: gdb.base/commands.exp:
PASS -> FAIL: gdb.base/commands.exp: tried to deprecate non-existing command
PASS -> FAIL: gdb.base/commands.exp: maintenance deprecate p "new_p" /1/
PASS -> FAIL: gdb.base/commands.exp: p deprecated warning, with replacement
PASS -> FAIL: gdb.base/commands.exp: Deprecated warning goes away /1/
PASS -> FAIL: gdb.base/commands.exp: maintenance deprecate p "new_p" /2/
PASS -> FAIL: gdb.base/commands.exp: maintenance deprecate print "new_print"
PASS -> FAIL: gdb.base/commands.exp: both alias and command are deprecated
PASS -> FAIL: gdb.base/commands.exp: Deprecated warning goes away /2/
PASS -> FAIL: gdb.base/commands.exp: deprecate long command /1/
PASS -> FAIL: gdb.base/commands.exp: long command deprecated /1/
PASS -> FAIL: gdb.base/commands.exp: deprecate long command /2/
PASS -> FAIL: gdb.base/commands.exp: long command deprecated with no alternative /2/
PASS -> FAIL: gdb.base/commands.exp: deprecate with no arguments
PASS -> FAIL: gdb.base/commands.exp: begin commands in bp_deleted_in_command_test
PASS -> FAIL: gdb.base/commands.exp: add clear command
PASS -> FAIL: gdb.base/commands.exp: add printf command
PASS -> FAIL: gdb.base/commands.exp: add cont command
PASS -> FAIL: gdb.base/commands.exp: end commands
PASS -> FAIL: gdb.base/commands.exp: run factorial until breakpoint
PASS -> FAIL: gdb.base/commands.exp: add silent tbreak command
PASS -> FAIL: gdb.base/commands.exp: add printf tbreak command
PASS -> FAIL: gdb.base/commands.exp: add cont tbreak command
PASS -> FAIL: gdb.base/commands.exp: end tbreak commands
PASS -> FAIL: gdb.base/commands.exp: run factorial until temporary breakpoint
PASS -> FAIL: gdb.base/commands.exp: stray_arg0_test #1
PASS -> FAIL: gdb.base/commands.exp: stray_arg0_test #2
PASS -> FAIL: gdb.base/commands.exp: stray_arg0_test #3
PASS -> FAIL: gdb.base/commands.exp: stray_arg0_test #4
PASS -> FAIL: gdb.base/commands.exp: source file with indented comment
PASS -> FAIL: gdb.base/commands.exp: recursive source test
PASS -> FAIL: gdb.base/commands.exp: set $tem in if_commands_test
PASS -> FAIL: gdb.base/commands.exp: if $tem == 2 - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: break main - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: else - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: break factorial - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: commands - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: silent - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: set $tem = 3 - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: continue - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: first end - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: second end - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: if $tem == 1 - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: break main - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: else - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: break factorial - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: commands - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: silent - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: set $tem = 3 - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: continue - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: first end - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: second end - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: hook-stop 1
PASS -> FAIL: gdb.base/commands.exp: hook-stop 1a
PASS -> FAIL: gdb.base/commands.exp: hook-stop 1b
PASS -> FAIL: gdb.base/commands.exp: main commands 1
PASS -> FAIL: gdb.base/commands.exp: main commands 1a
PASS -> FAIL: gdb.base/commands.exp: main commands 1b
PASS -> FAIL: gdb.base/commands.exp: main commands 1c
new FAIL: gdb.base/commands.exp: setting breakpoint at main
PASS -> FAIL: gdb.base/commands.exp: main commands 2
PASS -> FAIL: gdb.base/commands.exp: main commands 2a
PASS -> FAIL: gdb.base/commands.exp: main commands 2b
PASS -> FAIL: gdb.base/commands.exp: main commands 2c
PASS -> FAIL: gdb.base/commands.exp: cmd1 error
PASS -> FAIL: gdb.base/commands.exp: no cmd2
PASS -> FAIL: gdb.base/commands.exp: define one
PASS -> FAIL: gdb.base/commands.exp: define hook-one
PASS -> FAIL: gdb.base/commands.exp: enter commands for one redefinition in redefine_hook_test
PASS -> FAIL: gdb.base/commands.exp: execute one command in redefine_hook_test
PASS -> FAIL: gdb.base/commands.exp: define backtrace
PASS -> FAIL: gdb.base/commands.exp: expect response to define backtrace
PASS -> FAIL: gdb.base/commands.exp: enter commands in redefine_backtrace_test
PASS -> FAIL: gdb.base/commands.exp: execute backtrace command in redefine_backtrace_test
PASS -> FAIL: gdb.base/commands.exp: execute bt command in redefine_backtrace_test
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/commands.exp: commands part 2 in if_while_breakpoint_command_test
PASS -> FAIL: gdb.base/commands.exp: if_while_breakpoint_command_test #1
PASS -> FAIL: gdb.base/commands.exp: info break in if_while_breakpoint_command_test
new FAIL: gdb.base/commands.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.base/commands.exp: commands in infrun_breakpoint_command_test #1
PASS -> FAIL: gdb.base/commands.exp: commands in infrun_breakpoint_command_test #2
PASS -> FAIL: gdb.base/commands.exp: continue in infrun_breakpoint_command_test
PASS -> FAIL: gdb.base/commands.exp: commands in breakpoint_command_test
PASS -> FAIL: gdb.base/commands.exp: continue in breakpoint_command_test
PASS -> FAIL: gdb.base/commands.exp: print value in breakpoint_command_test
PASS -> FAIL: gdb.base/commands.exp: set foo in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: define mycommand in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: enter commands in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: execute user defined command in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: display user command in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: define myemptycommand in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: end definition of user-defined command with empty body
PASS -> FAIL: gdb.base/commands.exp: execute user-defined empty command in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: display empty command in command list in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: display user-defined empty command in user_defined_command_test
PASS -> FAIL: gdb.base/commands.exp: set value to 5 in test_command_prompt_position
PASS -> FAIL: gdb.base/commands.exp: if test in test_command_prompt_position
new FAIL: gdb.base/commands.exp:
PASS -> FAIL: gdb.base/commands.exp: tried to deprecate non-existing command
PASS -> FAIL: gdb.base/commands.exp: maintenance deprecate p "new_p" /1/
PASS -> FAIL: gdb.base/commands.exp: p deprecated warning, with replacement
PASS -> FAIL: gdb.base/commands.exp: Deprecated warning goes away /1/
PASS -> FAIL: gdb.base/commands.exp: maintenance deprecate p "new_p" /2/
PASS -> FAIL: gdb.base/commands.exp: maintenance deprecate print "new_print"
PASS -> FAIL: gdb.base/commands.exp: both alias and command are deprecated
PASS -> FAIL: gdb.base/commands.exp: Deprecated warning goes away /2/
PASS -> FAIL: gdb.base/commands.exp: deprecate long command /1/
PASS -> FAIL: gdb.base/commands.exp: long command deprecated /1/
PASS -> FAIL: gdb.base/commands.exp: deprecate long command /2/
PASS -> FAIL: gdb.base/commands.exp: long command deprecated with no alternative /2/
PASS -> FAIL: gdb.base/commands.exp: deprecate with no arguments
PASS -> FAIL: gdb.base/commands.exp: begin commands in bp_deleted_in_command_test
PASS -> FAIL: gdb.base/commands.exp: add clear command
PASS -> FAIL: gdb.base/commands.exp: add printf command
PASS -> FAIL: gdb.base/commands.exp: add cont command
PASS -> FAIL: gdb.base/commands.exp: end commands
PASS -> FAIL: gdb.base/commands.exp: run factorial until breakpoint
PASS -> FAIL: gdb.base/commands.exp: add silent tbreak command
PASS -> FAIL: gdb.base/commands.exp: add printf tbreak command
PASS -> FAIL: gdb.base/commands.exp: add cont tbreak command
PASS -> FAIL: gdb.base/commands.exp: end tbreak commands
PASS -> FAIL: gdb.base/commands.exp: run factorial until temporary breakpoint
PASS -> FAIL: gdb.base/commands.exp: stray_arg0_test #1
PASS -> FAIL: gdb.base/commands.exp: stray_arg0_test #2
PASS -> FAIL: gdb.base/commands.exp: stray_arg0_test #3
PASS -> FAIL: gdb.base/commands.exp: stray_arg0_test #4
PASS -> FAIL: gdb.base/commands.exp: source file with indented comment
PASS -> FAIL: gdb.base/commands.exp: recursive source test
PASS -> FAIL: gdb.base/commands.exp: set $tem in if_commands_test
PASS -> FAIL: gdb.base/commands.exp: if $tem == 2 - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: break main - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: else - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: break factorial - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: commands - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: silent - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: set $tem = 3 - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: continue - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: first end - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: second end - if_commands_test 1
PASS -> FAIL: gdb.base/commands.exp: if $tem == 1 - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: break main - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: else - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: break factorial - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: commands - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: silent - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: set $tem = 3 - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: continue - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: first end - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: second end - if_commands_test 2
PASS -> FAIL: gdb.base/commands.exp: hook-stop 1
PASS -> FAIL: gdb.base/commands.exp: hook-stop 1a
PASS -> FAIL: gdb.base/commands.exp: hook-stop 1b
PASS -> FAIL: gdb.base/commands.exp: main commands 1
PASS -> FAIL: gdb.base/commands.exp: main commands 1a
PASS -> FAIL: gdb.base/commands.exp: main commands 1b
PASS -> FAIL: gdb.base/commands.exp: main commands 1c
new FAIL: gdb.base/commands.exp: setting breakpoint at main
PASS -> FAIL: gdb.base/commands.exp: main commands 2
PASS -> FAIL: gdb.base/commands.exp: main commands 2a
PASS -> FAIL: gdb.base/commands.exp: main commands 2b
PASS -> FAIL: gdb.base/commands.exp: main commands 2c
PASS -> FAIL: gdb.base/commands.exp: cmd1 error
PASS -> FAIL: gdb.base/commands.exp: no cmd2
PASS -> FAIL: gdb.base/commands.exp: define one
PASS -> FAIL: gdb.base/commands.exp: define hook-one
PASS -> FAIL: gdb.base/commands.exp: enter commands for one redefinition in redefine_hook_test
PASS -> FAIL: gdb.base/commands.exp: execute one command in redefine_hook_test
PASS -> FAIL: gdb.base/commands.exp: define backtrace
PASS -> FAIL: gdb.base/commands.exp: expect response to define backtrace
PASS -> FAIL: gdb.base/commands.exp: enter commands in redefine_backtrace_test
PASS -> FAIL: gdb.base/commands.exp: execute backtrace command in redefine_backtrace_test
PASS -> FAIL: gdb.base/commands.exp: execute bt command in redefine_backtrace_test
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3461>

Commit(s) tested:
	73597c183c78ed0bea291897de6d8867ec640208

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Revert accidental commit.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ba9d90a26db3ac38629fbe23d3f972e3f68efd54>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3460>

Commit(s) tested:
	d751b79ea6bd7721367f1d78d22b70cee161fc26

Author(s) (in the same order as the commits):
	Jose E. Marchesi <jose.marchesi@oracle.com>

Subject:
	opcodes,gas: sparc: fix mnemonic of faligndatai

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ff76e69ff3074a729732774475fe3d732f2bdc5a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3459>

Commit(s) tested:
	6eb7d83039db70127a6eb3e4b64ecae782c42f00

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Regenerate configure

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0f21bb767075cfa7f05943deb5880901d016f3d1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3458>

Commit(s) tested:
	ae1bb197269ca8f7aa560168c0dfd0bb80730e0f

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Redundant hash table check

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b07bdf8ccc049293e2948a8f32a5a7ff8379fabf>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3457>

Commit(s) tested:
	870f88f7551b0f2d6aaaa36fb684b5ff8f468107

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	remove trivialy unused variables

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=94312556be9048bc10d3a8c099c166892ec59955>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
new FAIL: gdb.threads/pthreads.exp: continue until common routine run 15 times
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
new FAIL: gdb.threads/pthreads.exp: continue until common routine run 15 times
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3455>

Commit(s) tested:
	030e823caf4243a3337c2134a4a2f38490d3cf3d

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Define elf_backend_add_symbol_hook for Intel MCU

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=561bd5fd0627702f61010ae9b315a5a5631b0367>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3453>

Commit(s) tested:
	c175a65796a6f1d6a69ed0d7e3bce6f048c8e983

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Extract convert_load_reloc from x86 convert_load

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=eb2a630ebd16f1bccc7286b47f1723e9065a9da2>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3452>

Commit(s) tested:
	bedfd056d4d58a3ebaf8d396c8453f0d0468576f

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Cache the section contents in x86 check_relocs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6a7e0b047a6289578f8f7d96091e2736308f335f>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3451>

Commit(s) tested:
	9e78496443ec1525ee94c54249779639b4cded0b

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Initialize res in get_next_pcs_read_memory_unsigned_integer

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=91ea1278d8fa12397cf73dfd898925dfe480aca8>

*** Regressions found ***
============================
PASS -> FAIL: gdb.linespec/ls-errs.exp: lang=C++: break -source ls-errs.c
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.linespec/ls-errs.exp: lang=C++: break -source ls-errs.c
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3450>

Commit(s) tested:
	cf2ebb6e0958c9193c7c65620cd7a8b990d8b316

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Change type of cpsr in arm_sigreturn_next_pc

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=45c6106b56e06ea84ffb1ca269473d18629bbbfb>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3449>

Commit(s) tested:
	c1aebf87fd3887ae02e5e62fb41889c9fa37a8a9

Author(s) (in the same order as the commits):
	Ulrich Weigand <ulrich.weigand@de.ibm.com>

Subject:
	[spu] Fix C++ build problems

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8d5f862a7a413ba2e558ba1e48721b4a82f2e984>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3448>

Commit(s) tested:
	945e0f82dad31db89a107b496532886fe215c011

Author(s) (in the same order as the commits):
	Claudiu Zissulescu <claziss@synopsys.com>

Subject:
	[ARC] Add SYNTAX_NOP and SYNTAX_1OP for extension instructions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9ac1178025d786859f40f392bfaddd932c80a990>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3447>

Commit(s) tested:
	edf689f02787121a49ea0e36cfaa051b06852c8b

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Throw NOT_AVAILABLE_ERROR in read_stack and read_code

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6dbced372e99d16053849d1df11e471f952fbb63>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3446>

Commit(s) tested:
	02e370d94ee3abc6f910602e79c6d4515d9c720d

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix solib-display.exp remote check

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=85857ecc73445731dcd3622c97a89c25ba4850aa>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3445>

Commit(s) tested:
	8929ad8bbca9a8b036eba0397992d6f3b4d1966b

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Introduce procedure use_gdb_stub

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9af1b6142d911e8d49dda223a68761a6e4766871>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3444>

Commit(s) tested:
	6c4474237ab3356b100ebbdd6ff1a8839745023d

Author(s) (in the same order as the commits):
	Doug Evans <dje@google.com>

Subject:
	PR symtab/19914 fix handling of dwp + split debug

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=aef7987aa6f7253476363115ef15f9b486862a9c>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3443>

Commit(s) tested:
	a1ec3d244a75a6e6a2f54235c26e6b1e3b8a2482

Author(s) (in the same order as the commits):
	Don Breazeal <donb@codesourcery.com>

Subject:
	Fix typos in gdb_pipe function comment

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=898632c60675453d11ff8a37bedf65001135aeea>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3442>

Commit(s) tested:
	6d6a648c0789fb227ee2adfb089fe0ce8174708d

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	PR 10549: MIPS/LD: Handle OSABI setting for STB_GNU_UNIQUE

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5092b000a102e5a3b8e7319f7fb698397b88fd96>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3437>

Commit(s) tested:
	1f56df9d0d5ad89806c24e71f296576d82344613

Author(s) (in the same order as the commits):
	Jiong Wang <jiong.wang@arm.com>

Subject:
	[AArch64] Also puts value in place for R_AARCH64_RELATIVE

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=586a549354c68900417e819d348f384118fd82ca>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3436>

Commit(s) tested:
	20f55f3866ab70778d08fec2c09626cff9ed781d

Author(s) (in the same order as the commits):
	Szabolcs Nagy <szabolcs.nagy@arm.com>

Subject:
	Fix generation of AArhc64 instruction table.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a964615ee04904cb4c1bc09c02045814b80b2b30>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3434>

Commit(s) tested:
	1b4f615e4087a3ae9feba5912312cdcabc25e6a5

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix "-Wl,--dynamic-list" gdb/configure test

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=764e47a8eb5f4784f3606c2c9700754aeb049366>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3432>

Commit(s) tested:
	b631e59ba05af7c888838d3e2d6d408bfe60b57f

Author(s) (in the same order as the commits):
	Kyrylo Tkachov <kyrylo.tkachov@arm.com>

Subject:
	[gdb] Fix -Wparentheses warnings

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fb4cfd8c6d728107dc98d98360d7f4ed948fd99f>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3431>

Commit(s) tested:
	444e826c911693e6dad1cf907d81eb9dc1bef7d2

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix detach.exp remote check

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d77206b586061684986f46e944435087bea119e1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3430>

Commit(s) tested:
	740feeaa2049d0f9a7e5928191124583a1a8c645

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix annota-input-while-running.exp remote check

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2594e43abcef38cd566891365d35f33f86eaff07>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3428>

Commit(s) tested:
	493f652c956f2037c1c638c1887b634d67da0835

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Set interpreter in x86 create_dynamic_sections

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fa9794d965307d455992246262196d1d37fddd92>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3427>

Commit(s) tested:
	e62b9723fdfcf655ecbd46ea455567593e333f47

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Pass GOT_RELOC to UNDEFINED_WEAK_RESOLVED_TO_ZERO

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=86e89e5890ab8be4f43f839be591ac54a8149142>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3426>

Commit(s) tested:
	c337a1627c7e0edf6d46e66dee513c56975d0625

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	i386: Don't relocate section when check_relocs failed

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=68834badcd9334badb1f51cff4a9be12bc3ef50f>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3425>

Commit(s) tested:
	afd9acee15d55fccf2a25b72c99303f7cbaaa1c2

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	X86-64: Set check_relocs_failed on error

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8951e53b066ad4d0d52b69fbf64f15c510b4ea39>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3424>

Commit(s) tested:
	5522f910cb539905d6adfdceab208ddfa5e84557

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Enhance support for copying and stripping Solaris and ARM binaries.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2e541681102daac8fc67432bbbe3daa6ae47a5b1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3423>

Commit(s) tested:
	0400cf2f56c41896ecf52b88baa1d6178eb10432

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Don't show deprecated commands in help

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=19d792a7f0d31bca8635abf240fa76dafb7c2b4e>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3422>

Commit(s) tested:
	9080ac9d99e5326286a7df806955a326fcd655b2

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Add test for tracepoint enable/disable

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=94bcdeda0a1c075677a765d4213d37af62613dd0>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3421>

Commit(s) tested:
	35fd2deb6916e972248d52b1bc1d584fa9059f8f

Author(s) (in the same order as the commits):
	Par Olsson <par.olsson@windriver.com>

Subject:
	Fix write endianness/size problem for fast tracepoint enabled flag

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=97d4f13d26c47feb4b2e7109f41256b5690a8598>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3420>

Commit(s) tested:
	952ebca5831911a8ef2a79f6e1e7a2c24f71a388

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	ftrace tests: Use gdb_load_shlib result to lookup IPA in info sharedlibrary

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8157d655b5aad51064b8b65a74bb145085057cde>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3419>

Commit(s) tested:
	786a118cdf1aa33a8c232c63307e6711a0c00dfb

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Updated Chinese (simplified) translations for bfd, binutils and gold.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f38c810747d8f196e81b14284d1cd01b28d12776>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3418>

Commit(s) tested:
	f166f943f30a91792e8754cbca9d7652fc400aae

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Remove need_step_over from struct lwp_info

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2bd08c5f258dca79c51beaa03bb6e20642d98fa9>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3415>

Commit(s) tested:
	fca4cfd9ec8f28d0883cb8bbd55b82aa3418576b

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Make gdb_load_shlibs return the destination path of the library

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=188e80d18e2ce41561b2dbf28ceea3b341678e49>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3413>

Commit(s) tested:
	57809e5e5a506664eb54433ded81ab0785168a83

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	Workaround gdbserver<7.7 for setfs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9de5d15553e8915f169772fb2172d7ac4d5b88b4>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3412>

Commit(s) tested:
	91f8bf69a526912f86da81070407bba6a050e27f

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Skip debug sections when estimating distances

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=03ea99cad6b83b0e046f42035b579f1f7aedda23>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3411>

Commit(s) tested:
	11cf4ffb5e256d268a8f4cea0fc88a0a46bf824c

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Skip gdb.base/branch-to-self.exp if gdb,nosignals exists

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=df6d0584acaee708cb1a2cff6565ba221d7e9c10>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3410>

Commit(s) tested:
	476350ba4800f1144b125f6511a5e25b223cc90b

Author(s) (in the same order as the commits):
	Martin Galvan <martin.galvan@tallertechnologies.com>

Subject:
	c_value_print: Revert 'val' to a reference for TYPE_CODE_STRUCT

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9a91de4afb6a846b0d9bee53a87034185677e41f>

*** Regressions found ***
============================
PASS -> FAIL: gdb.linespec/ls-errs.exp: lang=C: break 	  	:
PASS -> FAIL: gdb.mi/mi-reverse.exp: mi runto main
PASS -> FAIL: gdb.mi/mi-reverse.exp: Turn on process record
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.linespec/ls-errs.exp: lang=C: break 	  	:
PASS -> FAIL: gdb.mi/mi-reverse.exp: mi runto main
PASS -> FAIL: gdb.mi/mi-reverse.exp: Turn on process record
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3408>

Commit(s) tested:
	7881f69ee902b06433f071fd8cbdee1b401c9b76

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix a typo in the check for SNANs in the RX simulator.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9912046fe36e49acc1741f3a77687b349ccf1cec>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3407>

Commit(s) tested:
	2cdad34c4fba2c6319584d6bb42b84020a9244ac

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Add support for the --trace-decode option to the AArch64 simulator.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6a36c7a0d5123fbb8ecac69091b9acee59c11a93>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3406>

Commit(s) tested:
	a6a4679fc0ad12e99e0d8374752ecce9ef097ec2

Author(s) (in the same order as the commits):
	Alan Modra <amodra@gmail.com>

Subject:
	Cache result of scan for __start_* and __stop_* sections

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=09349f37e7f95e452c51b887a9813ddb22787c96>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3405>

Commit(s) tested:
	28cc9170c3d0bc0c5e82b45a10015e4bbcb01125

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	add casts to avoid arithmetic on void *

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e525707002559a8876983b42d4da15bfb03f79be>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: no thread starvation
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/continue-pending-status.exp: no thread starvation
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3404>

Commit(s) tested:
	3e2e34f8623d9eeb6710d8f3883f26af8b07bbd1

Author(s) (in the same order as the commits):
	Keven Boell <keven.boell@intel.com>

Subject:
	fort_dyn_array: Use value constructor instead of raw-buffer manipulation.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0a607c41fb3b3f9c01cb8df6f32249617efb7844>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3402>

Commit(s) tested:
	9920b4348edbdd83e3f91c85d7174cb92bba204d

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	fort_dyn_array: Enable dynamic member types inside a structure.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0190323264289085242e127e41bf34730fc923b2>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3401>

Commit(s) tested:
	d5486c43728b4fa17c111a301c30a1e072eaec6a

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Always count the NULL entry in dynamic symbol table

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4b55c9b01f5fa77768b85c6d25fe1a71d57ec3ce>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3398>

Commit(s) tested:
	85ba7d867af39fe1408accd1f9ea4ca3dcb84b99

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[GDBserver] Don't error in reinsert_raw_breakpoint if bp->inserted

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=dd0ec35c333d6ebba8fd2660fc2a6c64bf089e71>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3397>

Commit(s) tested:
	20249ae4551ae7b2193caed73d9ce8d594f38754

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Insert breakpoint even when the raw breakpoint is found

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ed1db18912c5efc4177afa6bc1d2f954126d8d9f>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3396>

Commit(s) tested:
	21edc42f4e1ec6fe8cfce171232bab27ad4af372

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Force to insert software single step breakpoint

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fdbb9d4f5eef5a5de1a9ddb7843a7bf15c9d580e>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3395>

Commit(s) tested:
	c0f92bf9430546707f2154b8a2656974e5c7093c

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Skip if size of bfd_vma is smaller than address size

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2e7e12fa5f9b2388b52ccefb2f9420fd54524cf4>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3393>

Commit(s) tested:
	0a5d52f0ec8dd56b7953764a9bc1dc71ff6b69ca

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Fix fails in gdb.trace/unavailable.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4f23447078a2d72046d7420f05501ba2b1f4f012>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3391>

Commit(s) tested:
	b3f11165aad39586cca0352ed5fe32b721699c76

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Centralize yacc interface names remapping (yyparse, yylex, yyerror, etc)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=072a0b3af5745ef02e003573abb86aedf5487c06>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3390>

Commit(s) tested:
	6290672f89d5638a9da5ce10b2f4ba793dcc6396

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Switch gdb's TRY/CATCH to C++ try/catch

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5445100d60494166ca4fb0746cc198d11c556ba9>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3389>

Commit(s) tested:
	89525768cd086a0798a504c81fdf7ebcd4c904e1

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Propagate GDB/C++ exceptions across readline using sj/lj-based TRY/CATCH

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=80c2acfc5358ccd3efaf33c35e7af666be888550>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3388>

Commit(s) tested:
	3c610247abdf7fd6d22d21f11552d223be1e12cd

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Rename rl_callback_read_char_wrapper -> gdb_rl_callback_read_char_wrapper

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f1c802fcb86a44cbe1a399faab24dc3545180ff7>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3387>

Commit(s) tested:
	3539aa13fbcadd930b0b6d8a97f9f125f02a73dc

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[ARM] Clear reserved bits in CPSR

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c7e3291cc80c29221c35a36fe64423b6a61e6ce7>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3386>

Commit(s) tested:
	495346f6f07ea711662106f0e6f8d684fe489cd8

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Fix fail in gdb.base/annota1.exp and gdb.base/annota3.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9c87d26588f9fcc529fb581ff31283758969b4bb>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3385>

Commit(s) tested:
	0f60e29b5a13066f7625dfeadcc329aeefd9d5a5

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Joel Brobecker stepping down as AIX Maintainer

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8cd0d7aaff1f16984807aef1c039772a2041d7ac>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3384>

Commit(s) tested:
	7915f48c28e24927d2842cc66ad001947776dcd8

Author(s) (in the same order as the commits):
	Walfred Tedeschi <walfred.tedeschi@intel.com>

Subject:
	[obv] [PR gdb/19980] Typo in gdbserver/configure.srv

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=61f7e1b347621ded37801b182cfb6fbb5ec21e6c>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3382>

Commit(s) tested:
	5b061e98860ad84315704c732a1a43525f494946

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Deliver signal in hardware single step

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c67f760f61bff2b28bbe90be2d8034e5db5de083>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3380>

Commit(s) tested:
	6645479e9dc9470d22393d5bc4ef2ef2d391e848

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Exclude linker created file from dynobj

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fc0ca571a9ade9a72da93759b4b73763b97f9539>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3379>

Commit(s) tested:
	6cd255ca1f03550291bd05ac4548e383bca88c5f

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Set dynobj to a normal input file if possible

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=95a25cc2d73abd890a749be4a90d4137ac19df16>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3378>

Commit(s) tested:
	3877922e56a9e44fed0ca72e64cad7578e6b1ed5

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	MIPS: Go back with the default Linux # of registers to 90

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=93c9ec077e8a9416b4656e3bc38cf9bedf239da6>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3377>

Commit(s) tested:
	88c3cd8dcb60606a25a16ea11149219db00f847b

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Switch gdb's TRY/CATCH to sjlj again

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f7807feab1f79a98977467dde22067b989a8a8c6>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors
new FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3376>

Commit(s) tested:
	4f3b23b390640efdc36c575dbda2175e61154bc9

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Add support for non-ELF targets to check their relocs.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=ab6b03ee04b0b2ddcc198e35f4d8b538dfc6d100>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors
new FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3375>

Commit(s) tested:
	71829b1a3f9b4825150747b138b5cfadf0c5fcba

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix AIX gdb build with C++ compiler

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=89c11b90e8ff39ae52e4097502b3d3e43cc1413a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors
new FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3374>

Commit(s) tested:
	3451269c4128c4b74f4614d9781cb75207c5ee34

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix s390 GNU/Linux gdb and gdbserver builds

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0d272b5c54eae8197c8a59b07a107bd916034513>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors
new FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3373>

Commit(s) tested:
	b36cec19e826c19648964576ef2d20d63f99e888

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Add missing sentinel 'char *' casts in concat/reconcat calls

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b62137299b6926af6e96b244aeff4143aaf5aee1>

*** Regressions found ***
============================
new FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors
new FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.gdb/python-interrupts.exp: call catch_command_errors
new FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3369>

Commit(s) tested:
	5ae0055212a4835793815dbd8fa120d8c63fc7e8

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix host signal vs gdb signal mixup in gdb/darwin-nat.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d0e63c53ec1564245ed81c58878bbe86b5183fc9>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3368>

Commit(s) tested:
	d9436c7c71f13df84182371c6b2fb6e356051d14

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix "incompatible pointer type" warning in gdb/aarch64-tdep.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c38b53e6c3035d347f75e537b37778aa89d4c044>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3367>

Commit(s) tested:
	597e448caf30996be7e4583847da720f8021b20c

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb/darwin-nat.c: Fix "cast to pointer from integer of different size" warning

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4e1c7ea9612e85b483ddc9b062090118554e4e1a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3366>

Commit(s) tested:
	338c190a92871c063847caef51bdc066372d4550

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Check run-time R_X86_64_32 relocation overflow

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=50d5d88edc8b12e9b256193820e0caa40d42d38d>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3365>

Commit(s) tested:
	6c739336e5aadd6670909059fba889f50caa9cea

Author(s) (in the same order as the commits):
	Doug Evans <xdje42@gmail.com>

Subject:
	symmisc.c (dump_symtab_1): Print owning compunit for identical blockvectors.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6188e8c6c788365eec0fa1ff3bf06a091dba384b>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3363>

Commit(s) tested:
	466ee2af4a927fc6aaaaa62b0abd3b0cff9bcef7

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Call _bfd_elf_create_ifunc_sections only for ifunc

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9d404c6c2f28805349981438627e38626fa6a0fc>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3362>

Commit(s) tested:
	d968975277ba280372002800c6c25bb1b29f496e

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Check ELF relocs after opening all input files

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=53ab341e155a2aeb7805c295440cc7b400f02b11>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3361>

Commit(s) tested:
	6885166d994162c92dc9053bdf2d87e67a452db3

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Move ARM_CPSR_GREGNUM to arch/arm-linux.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=88840de77c1e56e623afcf8244080a3453a9cbc5>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3360>

Commit(s) tested:
	e6c7cdec063514bb9ffe2a62fb280e5ec676cac0

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	update many old style function definitions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=34e1d81d07f4cb74519a33edf67d0d92d95d17af>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3359>

Commit(s) tested:
	b98e6871247e1ef764360f6d042254ce4af62ca4

Author(s) (in the same order as the commits):
	Trevor Saunders <tbsaunde+binutils@tbsaunde.org>

Subject:
	change argument type to bfd_byte

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=85743be367fa03459a96224393063ec29742207b>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3358>

Commit(s) tested:
	52176c676da5f4b7339f254dc83cb35a0789bf20

Author(s) (in the same order as the commits):
	Andrew Burgess <andrew.burgess@embecosm.com>

Subject:
	arc: Fix relocation formula for ARC_NPS_CMEM16 relocation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=924f8abb40053fddc5cecd353ddfd6004c738c7d>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3357>

Commit(s) tested:
	21002a635bf3da33367592e3a3ab3cce24fe5299

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	Handle void * conversions in FreeBSD/x86 native code to fix C++ build.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=8ce1a4d840593bae88c2e71e532e3955b314455f>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3354>

Commit(s) tested:
	c8f785f220bab3c17fc93445ac509495d00d5afe

Author(s) (in the same order as the commits):
	Andrew Burgess <andrew.burgess@embecosm.com>

Subject:
	opcodes/arc: Add more nps instructions

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=4c518cb6c82c5c060bddb83f457b620b9ead5421>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3353>

Commit(s) tested:
	d04c1a59f3b6ae23f16988961cd74b561ed6f8d6

Author(s) (in the same order as the commits):
	Doug Evans <xdje42@gmail.com>

Subject:
	symmisc.c (dump_symtab_1, dump_symtab): Delete arg objfile.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=cf2d834fe3a3696348c0f3be3a1d4db8bc44701a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3352>

Commit(s) tested:
	85c10f77b70007a0c528bdc9dbba1add947b3085

Author(s) (in the same order as the commits):
	Doug Evans <xdje42@gmail.com>

Subject:
	Fix copyright year, remove linux only test.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e29b71c671f913af9a3ae041bec62ba956dd5837>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3351>

Commit(s) tested:
	a55411b9ff672c73172fff98319eb87af5a5fb4c

Author(s) (in the same order as the commits):
	Doug Evans <xdje42@gmail.com>

Subject:
	* source.c (is_regular_file): New arg errno_ptr.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=68f87a772c73924bad4aab228d0ac6d2f5ace01e>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3350>

Commit(s) tested:
	73e6209faecc21516a981ed86a27b259f506098c

Author(s) (in the same order as the commits):
	Andreas Arnez <arnez@linux.vnet.ibm.com>

Subject:
	linux-record: Squash cases with identical handling

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fb90586fe119e336d3ccc9737d5e32f6f6bbfb6a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3349>

Commit(s) tested:
	f42bf748e417cf9120fc57d144b6eaaf3adda247

Author(s) (in the same order as the commits):
	Walfred Tedeschi <walfred.tedeschi@intel.com>

Subject:
	Re-factor (i386|amd64)mpx target descriptions.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=40aa07f3f8e49946714f36c8882cf8048581b19a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3348>

Commit(s) tested:
	2b863f512dce3c2469cf40e4559fb571b1b01658

Author(s) (in the same order as the commits):
	Walfred Tedeschi <walfred.tedeschi@intel.com>

Subject:
	Add target descriptions for AVX + MPX

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=c97e8c4e6b786fe7594721017cf5d13d96c1c68e>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3347>

Commit(s) tested:
	bb7dc663abaa72601edfdce3ca7aff6fdb43bffe

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Sync Makefile.tpl with gcc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=86c851f1a5e1a09d9f6939911eadd3ca8961fb00>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3345>

Commit(s) tested:
	a22df60ad216517bbca4b391bec09f9ded06ab7b

Author(s) (in the same order as the commits):
	Martin Galvan <martin.galvan@tallertechnologies.com>

Subject:
	Fix gdb crash when trying to print the address of a synthetic C++ reference

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=69eb08dbe32e750bff15f448697219ea99e66c5b>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3344>

Commit(s) tested:
	0c13f7e559afe5f973a59311b0e401296c48d96c

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	fortran: Testsuite, fix different type naming across compilers.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6c462016b02bd4b816bed9a796f6f0c722fd9839>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3343>

Commit(s) tested:
	9b9b09e9020aa32ade1a86461804a1950d967abb

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	Testsuite: Fix compiling of shared libraries with ICC.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a398dd24e0590897852d222a956187b0066ba078>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3342>

Commit(s) tested:
	a14d1f4dfc08edc8fe92b17b36a55d89203fb89f

Author(s) (in the same order as the commits):
	Bernhard Heckel <bernhard.heckel@intel.com>

Subject:
	testsuite: Support detection of Intel compilers via test_compiler_version.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3f04b7da8be223f8f974fecdeb8a5b475dc8f9fd>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3341>

Commit(s) tested:
	5947319ef398728052a22575e1d0de0e94e4220f

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Revert 415fa612

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=df41894f06c9d3db40104d5fa0c35f931b943a3b>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3340>

Commit(s) tested:
	58484447ed8e1c64bbd73f224c8c9452a7420beb

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb/ada-exp.y: Remap yydefred

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a2e8a8728d366abfed83026550b19106c8f8c5db>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3338>

Commit(s) tested:
	d7abe1019dbff66b6abfb32df90d0c13328710ee

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix gdb C++ build when libipt is available

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=7ea51ae2341964ebb2ebfdb6e17fc3e90c9d02ab>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-1: detach
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3337>

Commit(s) tested:
	6fd8e7c249dcefd937897f743e886751adb90c90

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Regenerate Makefile.in/aclocal.m4 automake 1.11.6

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=a2ae621b91fa8e0cb7919b2858c60c686d6f3c64>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: no thread starvation
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/attach-pie-misread.exp: shift-by-2: detach
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/continue-pending-status.exp: no thread starvation
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3334>

Commit(s) tested:
	77770d832135a252d22eb95166c5ccfd40ca6a69

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	MIPS/Linux: Also recognize TRAP_BRKPT and TRAP_HWBKPT

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6c1a8daee5272b8363204f73dd5f19eaf153d3c7>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3333>

Commit(s) tested:
	415fa612334afb70600c2a7dbd2c2ff56ebbc4f3

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[ARM] minor opt in thumb_stack_frame_destroyed_p

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=f2c7da26542b4d09d7d5afa03e620b76cdc7c1f9>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3332>

Commit(s) tested:
	4b0c052e456421a3c6d7b4c98be3ad0b3bd2ad27

Author(s) (in the same order as the commits):
	Andrew Burgess <andrew.burgess@embecosm.com>

Subject:
	arc/nps400 : New cmem instructions and associated relocation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2b7a5fa8779f89a43b927a37e4b0b1cd7973148a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3331>

Commit(s) tested:
	33cbe6c07ed7e66d65c106cffb496eff5d7e8fb5

Author(s) (in the same order as the commits):
	Andrew Burgess <andrew.burgess@embecosm.com>

Subject:
	bfd/arc: Rename enum entries to avoid conflicts

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e67655d1bfcb62bfb1945bdac6a158f7b75c7b50>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3329>

Commit(s) tested:
	7634c4e679156fc6a93ccb8b33898f5cf41eb233

Author(s) (in the same order as the commits):
	H.J. Lu <hjl.tools@gmail.com>

Subject:
	Replace "link" with "sh_link"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=daf923abc7087f416ec2d134c4a8413dfda7f2c7>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3328>

Commit(s) tested:
	7f31862a8d9f3eea51fc58bd66abeb70c730feaf

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Avoid "format not a string literal" warnings

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6ebeb3b0f83d86f064752946a7078a37030b8ffc>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3327>

Commit(s) tested:
	aebf07fc1483b0bda9bbc1c0b7d7184b7e840677

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Avoid implicit float <-> integer conversion warnings

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=fa93aae3f986db6abbc6f009af4655e22141b6cc>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3325>

Commit(s) tested:
	7d49b1d0b08426c650a69a6c4971cba56a4e6af1

Author(s) (in the same order as the commits):
	Luis Machado <lgustavo@codesourcery.com>

Subject:
	Test GDB connection to GDBserver with no symbol files

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3b4886a1c6c708e5e2522816c6a696703d250c4a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3323>

Commit(s) tested:
	8392fa22d69113602407281cbb364f29557c39b1

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix and improve comment in gdb_remote_download

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=46115768d50582592c6506730c1d7e0d84719b1e>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3321>

Commit(s) tested:
	accc018020dd329d99b50335ad168d35650b7f09

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Fix disassembly of the V850's LD.BU instruction.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e53fbf99bceaea79da6db7399909c0c6c432ed7c>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3320>

Commit(s) tested:
	45e3745ed0e034fdec5beee0738f383bd6e2e045

Author(s) (in the same order as the commits):
	Antoine Tremblay <antoine.tremblay@ericsson.com>

Subject:
	Fix aarch64 ftrace JIT condition testcase

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d4c1204e1dd9945ffd150c5b86374249d0ff4198>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3319>

Commit(s) tested:
	3a00c80277a54abe0b286a6e8babc8fe50120205

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR remote/19840: gdb crashes on reverse-stepi

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2c27f01a0f93360c1acc75f3672582903c7be2d5>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3317>

Commit(s) tested:
	e26b7e41652e288dfdb4c48121bba470c4774150

Author(s) (in the same order as the commits):
	Markus Metzger <markus.t.metzger@intel.com>

Subject:
	btrace: fix test build error in gdb.btrace/instruction_history.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=427dbdcd8f81690d6896a0ac912cc6579ca92a89>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3316>

Commit(s) tested:
	8ce09462959bbc2af15e8088c5e54c8668cf8ccb

Author(s) (in the same order as the commits):
	Antoine Tremblay <antoine.tremblay@ericsson.com>

Subject:
	Fix typo in ftrace.exp condition testing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=745e0653fa8687acbcc29495c1948fba111874d4>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3315>

Commit(s) tested:
	0f41b320edb93e2c0cdd76f218811e197156b052

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	[C++] Switch TRY/CATCH to real C++ try/catch by default again

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=45410a1269be7a6afc5fafc5a9e4362464cb82a1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3314>

Commit(s) tested:
	173981bc49c9e8fce9271cb47714952dbe2ec627

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use setjmp/longjmp for TRY/CATCH instead of sigsetjmp/siglongjmp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=d90498f610e17aa1777a6e903e2f3842cc9d5598>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3313>

Commit(s) tested:
	2afc13ff80492278154c0f2156a9d32dd5ba675a

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Eliminate prepare_to_throw_exception

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=e92080be86b691cf093761a306d701b94baf97f9>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3312>

Commit(s) tested:
	cfd0fbddb025d36228d02fe23e06039acc6104e4

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Eliminate target_check_pending_interrupt

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0251d007095ce4690b2b4229151853aeeae06523>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3311>

Commit(s) tested:
	585a46a2d01d25181926329f258f1d1374f93e99

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Eliminate immediate_quit

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b8dec59bfc21a699e83f2a0aa95acb90f180a582>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3310>

Commit(s) tested:
	048094accce2110432bf7d44c34acc17865cf85a

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	target remote: Don't rely on immediate_quit (introduce quit handlers)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=9e228075c73feff7aab8f45a988e5276658d037e>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3309>

Commit(s) tested:
	a12ac51333cf97f4da0597d049cc694b4535e7dd

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	TUI: GC tui_target_has_run

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=b8d3e6c671f1b4bcc2cc487eed8f0e75d7ce445a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3308>

Commit(s) tested:
	5fe966540d6b748f825774868463003700f0c878

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use target_terminal_ours_for_output in MI

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=6307bcdca2781786d6e0e3862afd1a97492d167e>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3307>

Commit(s) tested:
	651ce16aa7c2bd5e9f634e91e73790dc3e01a5c0

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Do target_terminal_ours in query & friends instead of in all callers

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=79f2b1e80f61d961f59294db2cf7e4b94b3781fc>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3305>

Commit(s) tested:
	c5ac15402a894e87a118526a066880f596b3c78d

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use target_terminal_ours_for_output in warning/internal_error

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=5ce4ed95c265560d995088f385654d4b20d86c38>

*** Regressions found ***
============================
PASS -> FAIL: gdb.reverse/waitpid-reverse.exp: check waitpid record
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.reverse/waitpid-reverse.exp: check waitpid record
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3304>

Commit(s) tested:
	f8e3ef9dc4d803729a8f0e0cafb2c995b576c44e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use target_terminal_ours_for_output in infcmd.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=2640bef57b440a00d5fa552b64dfdfb4e362edce>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3303>

Commit(s) tested:
	481ac8c9bbbfc4b7506dfdb4a5b92b859d5c47d9

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Use target_terminal_ours_for_output in exceptions.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=3c60d7be83e888d929052204eaebebdf9b0e6e85>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================

Failures on Debian-i686, branch master

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3301>

Commit(s) tested:
	99bbb428d4412b79e59df321f9e83c13342e4612

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	ada-lang.c: Introduce type_as_string and use it

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=master&id=0fad30137350083bcbb619c296f1359788243eba>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr2: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
============================


*** Failures that are being ignored ***
============================
FAIL: gdb.ada/mi_var_array.exp: list vta's children
FAIL: gdb.base/longjmp.exp: next over patt3
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugSEPpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/multi-forks.exp: Run to exit 12 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 3 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 4 (timeout)
FAIL: gdb.base/multi-forks.exp: Run to exit 6 (timeout)
FAIL: gdb.base/multi-forks.exp: inferior 3 (timeout)
FAIL: gdb.base/multi-forks.exp: info inferior 3 (timeout)
FAIL: gdb.mi/mi-nsmoribund.exp: resume all, waiting for program exit (timeout)
FAIL: gdb.threads/multiple-step-overs.exp: step
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieATTACH: attach-relinkNO: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugINpieATTACH: attach-relinkYES: seen displacement message as NONZERO
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: attach main bt
FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieATTACH: attach-relinkYES: seen displacement message as NONZERO
============================