[binutils-gdb/gdb-7.11-branch] Fix double prompt output after run control MI commands with mi-async on (PR 20045)

[binutils-gdb/gdb-7.11-branch] Fix double prompt output after run control MI commands with mi-async on (PR 20045)

[sergiodj+buildbot]

*** TEST RESULTS FOR COMMIT f0a8d0dc70eddbf1e323e8c07f5092ff5e327548 ***

Author: Simon Marchi <simon.marchi@ericsson.com>
Branch: gdb-7.11-branch
Commit: f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Fix double prompt output after run control MI commands with mi-async on (PR 20045)

When you use a run control command (-exec-run, -exec-continue,
-exec-next, ...) with mi-async on, an extra (gdb) prompt is displayed:

  -exec-continue
  ^running
  *running,thread-id="all"
  (gdb)
  (gdb)

It doesn't seem to be a big problem for front-ends, since this behavior
started in gdb 7.9 and we haven't heard anything about that.  However,
it caused me some trouble while writing a test for PR 20039 [1].

The problem comes from an extra (gdb) prompt that we write when running
in mi-async off mode to emulate a past buggy behavior.  When executing a
run control command synchronously, previous gdbs always printed a prompt
right away, even though they are not ready to accept new MI commands
until the target stops.  Only at this time should they display a prompt.
But to keep backwards compatibility apparently, we print it anyway.
Since commit 198297aaf, the condition that decides whether we should
print that "bogus" prompt or not has become true, even when running with
mi-async on.  Since we already print a prompt at the end of the
asynchronous command execution, it results in two prompts for one
command.

The proposed fix is to call target_can_async_p instead of
target_is_async_p, to make the condition:

  if (!target_can_async_p () || sync_execution)
    ... show prompt ...

That shows the prompt if we are emulating a synchronous command on top
of an asynchronous target (sync_execution) or if the target simply can't
run asynchronously (!target_can_async_p ()).

Note that this code is changed and this bug fixed by Pedro's separate
console series, but I think it would be nice to have it fixed in the
mean time.

I ran the gdb.mi directory of the testsuite with mi-async on and off, I
didn't see any regressions.

gdb/ChangeLog:

	* mi/mi-main.c (mi_on_resume): Call target_can_async_p instead
	of target_is_async_p.

[1] https://sourceware.org/ml/gdb-patches/2016-05/msg00075.html

Failures on RHEL-s390x-m64, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	rhel-7.1-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/RHEL-s390x-m64/builds/1846>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/RHEL-s390x-m64/.git/tree/?h=gdb-7.11-branch&id=4bcfe023c76a62c4ef46d34be2ed59a30e024314>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/siginfo-obj.exp: Extract si_errno
PASS -> FAIL: gdb.base/siginfo-thread.exp: Extract si_errno
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/s390-multiarch.exp: compile
new FAIL: gdb.arch/s390-tdbregs.exp: compile failed
new FAIL: gdb.base/catch-syscall.exp: execve: syscall execve has returned
new FAIL: gdb.base/catch-syscall.exp: execve: continue to main
new FAIL: gdb.base/catch-syscall.exp: execve: continue until exit
PASS -> FAIL: gdb.base/jit.exp: one_jit_test-1: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/jit.exp: one_jit_test-2: continue to breakpoint: break here 2
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: continue to breakpoint: break here 2
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 1
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: detach
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: attach
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 0
PASS -> FAIL: gdb.base/jit.exp: PIE: one_jit_test-1: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/siginfo-obj.exp: Extract si_errno
PASS -> FAIL: gdb.base/siginfo-thread.exp: Extract si_errno
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================

Failures on Fedora-x86_64-m32, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m32/builds/3596>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-m32/.git/tree/?h=gdb-7.11-branch&id=4efa4130ca78db98cf85eaf400373f056d5d961a>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/interrupt.exp: continue
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.python/py-finish-breakpoint2.exp: set FinishBP after the exception
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
============================

Failures on Fedora-x86_64-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/3565>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=b8f3f758304f45b227655e28dcd996d5e84f84ec>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.dwarf2/dw2-undefined-ret-addr.exp: info frame
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.mi/mi-vla-fortran.exp: evaluate not associated vla
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================

Failures on Fedora-x86_64-native-gdbserver-m64, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/3584>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-gdbserver-m64/.git/tree/?h=gdb-7.11-branch&id=d5c9f86673f622ffd9b3d1a224d9e840cfd6e7f3>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.dwarf2/dw2-undefined-ret-addr.exp: info frame
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.mi/mi-detach.exp: detach
new FAIL: gdb.mi/mi-vla-fortran.exp: evaluate not associated vla
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================

Failures on Fedora-x86_64-native-extended-gdbserver-m64, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m64/builds/3614>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m64/.git/tree/?h=gdb-7.11-branch&id=4f848dbc961a6e599c168ecd17a339da739038a4>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/annota3.exp: signal sent
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell
PASS -> FAIL: gdb.base/annota1.exp: run until main breakpoint
PASS -> FAIL: gdb.base/annota3.exp: signal sent
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: break4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.cp/annota2.exp: annotate-quit
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
PASS -> FAIL: gdb.dwarf2/dw2-undefined-ret-addr.exp: info frame
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.mi/mi-vla-fortran.exp: evaluate not associated vla
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================

Failures on AIX-POWER7-plain, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	aix-power7-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/AIX-POWER7-plain/builds/2331>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/AIX-POWER7-plain/.git/tree/?h=gdb-7.11-branch&id=80cffed8db38b2063bcea1990f42d71038410aef>

*** Regressions found ***
============================
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 2: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 2: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 2: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 2: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 3: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 3: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 3: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 3: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 4: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 4: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 4: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 4: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 5: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 5: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 5: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 5: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 6: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 6: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 6: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 6: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 7: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 7: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 7: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 7: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 8: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 8: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 8: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 8: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 9: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 9: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 9: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 9: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 10: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 10: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 10: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 10: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 11: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 11: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 11: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 11: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 12: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 12: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 12: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 12: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: continue to tight loop
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: continue for ctrl-c
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: caught interrupt
new FAIL: gdb.threads/continue-pending-status.exp: no thread starvation
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=exit: fork: continue to child fork
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=exit: fork: continue to grandchild fork
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=exit: fork: kill child
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=exit: fork: switch to parent
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=exit: fork: break grandparent_done
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=exit: fork: continue
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=kill: fork: continue to child fork
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=kill: fork: continue to grandchild fork
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=kill: fork: kill child
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=kill: fork: switch to parent
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=fork: exit-kind=kill: fork: kill parent
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=exit: vfork: continue to child vfork
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=exit: vfork: continue to grandchild vfork
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=exit: vfork: kill child
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=exit: vfork: switch to parent
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=exit: vfork: break grandparent_done
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=exit: vfork: continue
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=kill: vfork: continue to child vfork
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=kill: vfork: continue to grandchild vfork
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=kill: vfork: kill child
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=kill: vfork: switch to parent
new FAIL: gdb.base/catch-fork-kill.exp: fork-kind=vfork: exit-kind=kill: vfork: kill parent
new FAIL: gdb.base/completion.exp: tab complete break break.c:ma
new FAIL: gdb.base/completion.exp: complete break break.c:ma
new FAIL: gdb.base/dprintf.exp: call: fprintf: 1st dprintf
new FAIL: gdb.base/dprintf.exp: call: fprintf: 2nd dprintf
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: non-stop: Can't run to main
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: all-stop: schedule-multiple=on: fork child appears
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: all-stop: schedule-multiple=on: info threads
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: all-stop: schedule-multiple=on: kill child
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: all-stop: schedule-multiple=off: fork child appears
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: all-stop: schedule-multiple=off: only parent marked running
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=parent: all-stop: schedule-multiple=off: kill child
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=child: non-stop: Can't run to main
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=child: all-stop: schedule-multiple=on: fork child appears
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=child: all-stop: schedule-multiple=on: info threads
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=child: all-stop: schedule-multiple=on: kill child
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=child: all-stop: schedule-multiple=off: fork child appears
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=child: all-stop: schedule-multiple=off: only child marked running
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=off: follow-fork=child: all-stop: schedule-multiple=off: kill child
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=on: follow-fork=parent: non-stop: Can't run to main
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=on: follow-fork=parent: all-stop: schedule-multiple=on: info threads
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=on: follow-fork=parent: all-stop: schedule-multiple=off: info threads
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=on: follow-fork=child: non-stop: Can't run to main
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=on: follow-fork=child: all-stop: schedule-multiple=on: fork child appears
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=on: follow-fork=child: all-stop: schedule-multiple=on: info threads
new FAIL: gdb.base/fork-running-state.exp: detach-on-fork=on: follow-fork=child: all-stop: schedule-multiple=on: kill child
PASS -> FAIL: gdb.base/funcargs.exp: run to call2a
new FAIL: gdb.base/hook-stop.exp: hook-stop runs continue&: inferior exits normally
new FAIL: gdb.base/hook-stop.exp: hook-stop runs continue&: info threads
new FAIL: gdb.base/infcall-exec.exp: call execlp
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: start
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: add inferior 3
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: inferior 3
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: attach to pid
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill inferiors 1 2
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: inferior 1
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: detach inferiors 3
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill inferiors 1 2 3
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: detach inferiors 1 2 3
new FAIL: gdb.base/kill-detach-inferiors-cmd.exp: kill inferiors 10
new FAIL: gdb.base/max-value-size.exp: using initial max-value-size: p/d one
new FAIL: gdb.base/max-value-size.exp: using initial max-value-size: p/d one_hundred
new FAIL: gdb.base/max-value-size.exp: using initial max-value-size: p/d one_hundred [99]
new FAIL: gdb.base/max-value-size.exp: max-value-size is '25': p/d one
new FAIL: gdb.base/max-value-size.exp: max-value-size is '25': p/d one_hundred
new FAIL: gdb.base/max-value-size.exp: max-value-size is '25': p/d one_hundred [99]
new FAIL: gdb.base/max-value-size.exp: max-value-size is '99': p/d one
new FAIL: gdb.base/max-value-size.exp: max-value-size is '99': p/d one_hundred
new FAIL: gdb.base/max-value-size.exp: max-value-size is '99': p/d one_hundred [99]
new FAIL: gdb.base/max-value-size.exp: max-value-size is '100': p/d one
new FAIL: gdb.base/max-value-size.exp: max-value-size is '100': p/d one_hundred
new FAIL: gdb.base/max-value-size.exp: max-value-size is '100': p/d one_hundred [99]
new FAIL: gdb.base/max-value-size.exp: max-value-size is '200': p/d one
new FAIL: gdb.base/max-value-size.exp: max-value-size is '200': p/d one_hundred
new FAIL: gdb.base/max-value-size.exp: max-value-size is '200': p/d one_hundred [99]
new FAIL: gdb.base/max-value-size.exp: max-value-size is 'unlimited': p/d one
new FAIL: gdb.base/max-value-size.exp: max-value-size is 'unlimited': p/d one_hundred
new FAIL: gdb.base/max-value-size.exp: max-value-size is 'unlimited': p/d one_hundred [99]
new FAIL: gdb.base/nested-addr.exp: print &foo_array[1].a
new FAIL: gdb.base/nested-addr.exp: print 1 && &foo_array[1].a
new FAIL: gdb.base/nested-subp1.exp: continue to the STOP marker
new FAIL: gdb.base/nested-subp1.exp: print i1
new FAIL: gdb.base/nested-subp2.exp: continue to the STOP marker
new FAIL: gdb.base/nested-subp2.exp: print count
new FAIL: gdb.base/nested-subp3.exp: continue to the STOP marker
new FAIL: gdb.base/nested-subp3.exp: print first
new FAIL: gdb.base/random-signal.exp: run: watch v
new FAIL: gdb.base/random-signal.exp: attach: attach
new FAIL: gdb.base/random-signal.exp: attach: watch v
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse
PASS -> FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, step from handler: leave handler
PASS -> FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, next from handler: leave handler
PASS -> FAIL: gdb.base/sigstep.exp: continue to handler, si+advance in handler, continue from handler: leave handler
new FAIL: gdb.base/wrong_frame_bt_full.exp: bt full
PASS -> FAIL: gdb.cp/cpexprs.exp: p CV_f
PASS -> FAIL: gdb.cp/impl-this.exp: at D::f
PASS -> FAIL: gdb.cp/member-ptr.exp: print
PASS -> FAIL: gdb.cp/nsnested.exp: print ab
PASS -> FAIL: gdb.cp/nsnoimports.exp: print _a
PASS -> FAIL: gdb.cp/nsnoimports.exp: print ab
PASS -> FAIL: gdb.cp/nsnoimports.exp: print abc
PASS -> FAIL: gdb.cp/ovsrch.exp: break A::outer::foo
PASS -> FAIL: gdb.cp/ovsrch.exp: break 'A::outer::foo
PASS -> FAIL: gdb.cp/ovsrch.exp: break A::B::inner::foo
PASS -> FAIL: gdb.cp/ovsrch.exp: break 'A::B::inner::foo
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c++: print E2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: before start: c++: print S2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: before start: c++: print U2
new FAIL: gdb.cp/var-tag.exp: before start: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype C
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype E
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: before start: c: print E2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: before start: c: print S2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: before start: c: print U2
new FAIL: gdb.cp/var-tag.exp: before start: c: ptype U2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: in main: c++: print E
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c++: print S
new FAIL: gdb.cp/var-tag.exp: in main: c++: print U
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c++: print E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c++: print S2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: in main: c++: print U2
new FAIL: gdb.cp/var-tag.exp: in main: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype C
new FAIL: gdb.cp/var-tag.exp: in main: c: print E
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype E
new FAIL: gdb.cp/var-tag.exp: in main: c: print S
new FAIL: gdb.cp/var-tag.exp: in main: c: print U
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: in main: c: print E2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: in main: c: print S2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: in main: c: print U2
new FAIL: gdb.cp/var-tag.exp: in main: c: ptype U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype C
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print S
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print U
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype cc
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: print U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c++: ptype U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype C
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print E
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype E
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print S
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print U
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype cc
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype ee
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype EE
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype E2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype S2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: print U2
new FAIL: gdb.cp/var-tag.exp: in C::f: c: ptype U2
new FAIL: gdb.fortran/vla-alloc-assoc.exp: print deallocated vla1
new FAIL: gdb.fortran/vla-alloc-assoc.exp: print deallocated vla2
new FAIL: gdb.fortran/vla-datatypes.exp: ptype intvla
new FAIL: gdb.fortran/vla-datatypes.exp: ptype realvla
new FAIL: gdb.fortran/vla-datatypes.exp: ptype complexvla
new FAIL: gdb.fortran/vla-datatypes.exp: ptype logicalvla
new FAIL: gdb.fortran/vla-datatypes.exp: ptype charactervla
new FAIL: gdb.fortran/vla-datatypes.exp: print intvla
new FAIL: gdb.fortran/vla-datatypes.exp: print realvla
new FAIL: gdb.fortran/vla-datatypes.exp: print complexvla
new FAIL: gdb.fortran/vla-datatypes.exp: print logicalvla
new FAIL: gdb.fortran/vla-datatypes.exp: print charactervla
new FAIL: gdb.fortran/vla-history.exp: print non-allocated vla1
new FAIL: gdb.fortran/vla-history.exp: print vla1 filled
new FAIL: gdb.fortran/vla-history.exp: print $1
new FAIL: gdb.fortran/vla-history.exp: print $2
new FAIL: gdb.fortran/vla-history.exp: print vla2
new FAIL: gdb.fortran/vla-history.exp: print $5
new FAIL: gdb.fortran/vla-history.exp: print $6
new FAIL: gdb.fortran/vla-ptr-info.exp: print pvla pointer information
new FAIL: gdb.fortran/vla-ptype-sub.exp: ptype array1
new FAIL: gdb.fortran/vla-ptype-sub.exp: ptype array2
new FAIL: gdb.fortran/vla-ptype.exp: ptype vla1 not initialized
new FAIL: gdb.fortran/vla-ptype.exp: ptype vla2 not initialized
new FAIL: gdb.fortran/vla-ptype.exp: ptype pvla not initialized
new FAIL: gdb.fortran/vla-ptype.exp: ptype vla1
new FAIL: gdb.fortran/vla-ptype.exp: ptype vla1 allocated
new FAIL: gdb.fortran/vla-ptype.exp: ptype vla2 allocated
new FAIL: gdb.fortran/vla-ptype.exp: ptype vla1 filled
new FAIL: gdb.fortran/vla-ptype.exp: ptype vla2 filled
new FAIL: gdb.fortran/vla-ptype.exp: ptype pvla associated
new FAIL: gdb.fortran/vla-ptype.exp: ptype pvla
new FAIL: gdb.fortran/vla-ptype.exp: ptype pvla re-associated
new FAIL: gdb.fortran/vla-ptype.exp: ptype pvla deassociated
new FAIL: gdb.fortran/vla-ptype.exp: ptype vla1 not allocated
new FAIL: gdb.fortran/vla-ptype.exp: ptype vla2 not allocated
new FAIL: gdb.fortran/vla-ptype.exp: ptype vla2
new FAIL: gdb.fortran/vla-sizeof.exp: print sizeof allocated vla1
new FAIL: gdb.fortran/vla-sizeof.exp: print sizeof associated pvla
new FAIL: gdb.fortran/vla-value-sub-arbitrary.exp: print arbitary array1
new FAIL: gdb.fortran/vla-value-sub-arbitrary.exp: print arbitary array2
new FAIL: gdb.fortran/vla-value-sub-finish.exp: print array2 in foo after it was filled
new FAIL: gdb.fortran/vla-value-sub-finish.exp: set array
new FAIL: gdb.fortran/vla-value-sub-finish.exp: print array2 in foo after it was mofified in debugger
PASS -> FAIL: gdb.fortran/vla-value-sub-finish.exp: sub_arr2
new FAIL: gdb.fortran/vla-value-sub.exp: print passed array1 in foo
new FAIL: gdb.fortran/vla-value-sub.exp: print array1
new FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was filled
new FAIL: gdb.fortran/vla-value-sub.exp: set array
new FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was mofified in debugger
new FAIL: gdb.fortran/vla-value.exp: print non-allocated vla1
new FAIL: gdb.fortran/vla-value.exp: print non-allocated &vla1
new FAIL: gdb.fortran/vla-value.exp: print member in non-allocated vla1
new FAIL: gdb.fortran/vla-value.exp: set member in non-allocated vla1
new FAIL: gdb.fortran/vla-value.exp: print allocated &vla1
new FAIL: gdb.fortran/vla-value.exp: print allocated vla1
new FAIL: gdb.fortran/vla-value.exp: print undefined pvla
new FAIL: gdb.fortran/vla-value.exp: print non-associated &pvla
new FAIL: gdb.fortran/vla-value.exp: print associated &pvla
new FAIL: gdb.fortran/vla-value.exp: print associated pvla
new FAIL: gdb.fortran/vla-value.exp: print pvla
new FAIL: gdb.fortran/vla-value.exp: print vla2
new FAIL: gdb.fortran/vla-value.exp: print vla1 after deassociated
new FAIL: gdb.fortran/vla-value.exp: print $myvar set to vla1
new FAIL: gdb.fortran/vla-value.exp: print $myvar
new FAIL: gdb.fortran/vla-value.exp: print $mypvar
PASS -> FAIL: gdb.gdb/complaints.exp: empty non-verbose non-noisy clear
PASS -> FAIL: gdb.gdb/complaints.exp: empty verbose non-noisy clear
PASS -> FAIL: gdb.gdb/complaints.exp: empty verbose noisy clear
PASS -> FAIL: gdb.gdb/complaints.exp: empty non-verbose noisy clear
PASS -> FAIL: gdb.gdb/selftest.exp: backtrace through signal handler
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -function myclass::myfunction
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -source cpexplicit.cc -function myclass::myfunction -label top
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -function myclass::myfunction -label top
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -source cpexplicit.cc -function myclass::myfunction -label top -line 3
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -function myclass::myfunction -label top -line 3
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -source cpexplicit.cc -line 29
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -function myclass::myfunction -label top
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -label top
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -line 3
new FAIL: gdb.linespec/cpexplicit.exp: setting breakpoint at -function myclass::myfunction -label top -line 3
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::myfunction -label top -line 3
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -line 3
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function myclass::operator,
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function 'myclass::operator,'
new FAIL: gdb.linespec/cpexplicit.exp: continue to breakpoint: -function "myclass::operator,"
new FAIL: gdb.linespec/cpexplicit.exp: dprintf -function myclass::operator,,"hello"
new FAIL: gdb.linespec/cpexplicit.exp: dprintf -function 'myclass::operator,',"hello"
new FAIL: gdb.linespec/cpexplicit.exp: dprintf -function "myclass::operator,","hello"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -source explicit.c -function myfunction -label top thread 123
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top -line 3
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top -line 3"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -source explicit.c -function myfunction -label top -line 3 if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top -line 3" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-source explicit.c -function myfunction -label top -line 3" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -source explicit.c -function myfunction -label top -line 3 thread 123
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -function myfunction -label top thread 123
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top -line 3
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top -line 3"
new FAIL: gdb.linespec/explicit.exp: setting breakpoint at -function myfunction -label top -line 3 if arg == 0
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top -line 3" with valid condition
new FAIL: gdb.linespec/explicit.exp: set breakpoint at "-function myfunction -label top -line 3" with invalid condition
new FAIL: gdb.linespec/explicit.exp: break -function myfunction -label top -line 3 thread 123
new FAIL: gdb.linespec/explicit.exp: complete unique function name
new FAIL: gdb.linespec/explicit.exp: complete non-unique function name
new FAIL: gdb.linespec/explicit.exp: complete non-existant function name
new FAIL: gdb.linespec/explicit.exp: complete unique file name
new FAIL: gdb.linespec/explicit.exp: complete non-unique file name
new FAIL: gdb.linespec/explicit.exp: complete non-existant file name
new FAIL: gdb.linespec/explicit.exp: complete filename and unique function name
new FAIL: gdb.linespec/explicit.exp: delete complete filename and unique function name breakpoint
new FAIL: gdb.mi/mi-async-run.exp: send interrupt command
new FAIL: gdb.mi/mi-async-run.exp: expect interrupt
new FAIL: gdb.mi/mi-dprintf.exp: fprintf: mi 2nd dprintf stop
PASS -> FAIL: gdb.mi/mi-logging.exp: Redirect log file contents
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: create varobj for ptr
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: create varobj for constPtr
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: check constPtr->A
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: create varobj for ptrConst
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: check ptrConst->A
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: create varobj for constPtrConst
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: check constPtrConst->A
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: check constRef->A
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: check s.constPtr->A
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: check s.ptrConst->A
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: check s.constPtrConst->A
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: list children of s.ref
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: list children of s.ref.public
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: check s.ref->A
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: check s.constRef->A
new FAIL: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 22
new FAIL: gdb.mi/mi-vla-fortran.exp: evaluate not allocated vla
new FAIL: gdb.mi/mi-vla-fortran.exp: create local variable vla1_not_allocated
new FAIL: gdb.mi/mi-vla-fortran.exp: info type variable vla1_not_allocated
new FAIL: gdb.mi/mi-vla-fortran.exp: eval variable vla1_not_allocated
new FAIL: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 23
new FAIL: gdb.mi/mi-vla-fortran.exp: evaluate allocated vla
new FAIL: gdb.mi/mi-vla-fortran.exp: create local variable vla1_allocated
new FAIL: gdb.mi/mi-vla-fortran.exp: info type variable vla1_allocated
new FAIL: gdb.mi/mi-vla-fortran.exp: eval variable vla1_allocated
new FAIL: gdb.mi/mi-vla-fortran.exp: get children of vla1_allocated
new FAIL: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 26
new FAIL: gdb.mi/mi-vla-fortran.exp: evaluate filled vla
new FAIL: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 29
new FAIL: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 30
new FAIL: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 35
new FAIL: gdb.mi/mi-vla-fortran.exp: evaluate not associated vla
new FAIL: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 36
new FAIL: gdb.mi/mi-vla-fortran.exp: evaluate associated vla
new FAIL: gdb.mi/mi-vla-fortran.exp: create local variable pvla2_associated
new FAIL: gdb.mi/mi-vla-fortran.exp: info type variable pvla2_associated
new FAIL: gdb.mi/mi-vla-fortran.exp: eval variable pvla2_associated
new FAIL: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 41
new FAIL: gdb.mi/mi-vla-fortran.exp: evaluate vla pointer set to null
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: infcall in inferior 1
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: two dummy frames
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: after infcall: bt in inferior 1
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: finish in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 1 first: after infcall: bt in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: before infcall: bt in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: infcall in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: before infcall: bt in inferior 1
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: finish in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 2
PASS -> FAIL: gdb.multi/dummy-frame-restore.exp: inf 2 first: after infcall: bt in inferior 1
new FAIL: gdb.multi/tids.exp: two inferiors: info threads show inferior numbers
new FAIL: gdb.multi/tids.exp: two inferiors: switch to thread using extended thread ID
new FAIL: gdb.multi/tids.exp: two inferiors: setting breakpoint at thread_function1
new FAIL: gdb.multi/tids.exp: two inferiors: continue to breakpoint: once
new FAIL: gdb.multi/tids.exp: two inferiors: inferior 1
new FAIL: gdb.multi/tids.exp: two inferiors: continue to breakpoint: twice
new FAIL: gdb.multi/tids.exp: two inferiors: info threads again
new FAIL: gdb.multi/tids.exp: two inferiors: info threads -gid
new FAIL: gdb.multi/tids.exp: two inferiors: p $_thread == 2
new FAIL: gdb.multi/tids.exp: two inferiors: p $_gthread == 4
new FAIL: gdb.multi/tids.exp: two inferiors: thread 4
new FAIL: gdb.multi/tids.exp: two inferiors: more threads: setting breakpoint at thread_function2
new FAIL: gdb.multi/tids.exp: two inferiors: more threads: inferior 2
new FAIL: gdb.multi/tids.exp: two inferiors: more threads: continue to breakpoint: once
new FAIL: gdb.multi/tids.exp: two inferiors: more threads: inferior 1
new FAIL: gdb.multi/tids.exp: two inferiors: more threads: continue to breakpoint: twice
new FAIL: gdb.multi/tids.exp: two inferiors: info threads 1
new FAIL: gdb.multi/tids.exp: two inferiors: thread apply 1
new FAIL: gdb.multi/tids.exp: two inferiors: info threads 1.1
new FAIL: gdb.multi/tids.exp: two inferiors: thread apply 1.1
new FAIL: gdb.multi/tids.exp: two inferiors: info threads 1 2 3
new FAIL: gdb.multi/tids.exp: two inferiors: thread apply 1 2 3
new FAIL: gdb.multi/tids.exp: two inferiors: info threads 1.1 1.2 1.3 2.1 2.2
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 0: caught interrupt
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=on: Can't run to main
new FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: Can't run to main
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=off: Can't run to main
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: Can't run to main
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: prepare to make hand call, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: prepare to make hand call, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: prepare to make hand call, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: prepare to make hand call, thread 5
PASS -> FAIL: gdb.threads/hand-call-new-thread.exp: iter 1: p new_thread
PASS -> FAIL: gdb.threads/kill.exp: threaded: all threads started
PASS -> FAIL: gdb.threads/leader-exit.exp: caught interrupt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=off: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=off: next: next
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: step: step
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 1
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 2
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 3
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 4
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 5
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 6
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 7
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 8
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 9
PASS -> FAIL: gdb.threads/next-while-other-thread-longjmps.exp: next to line 10
new FAIL: gdb.threads/non-ldr-exc-1.exp: lock-sched=off,non-stop=on: thread 2
new FAIL: gdb.threads/non-ldr-exc-1.exp: lock-sched=off,non-stop=on: continue over exec
new FAIL: gdb.threads/non-ldr-exc-1.exp: lock-sched=on,non-stop=off: set scheduler-locking on
new FAIL: gdb.threads/non-ldr-exc-1.exp: lock-sched=on,non-stop=off: continue over exec
new FAIL: gdb.threads/non-ldr-exc-1.exp: lock-sched=off,non-stop=off: continue over exec
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched=off,non-stop=on: thread 2
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched=off,non-stop=on: single thread left
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched=off,non-stop=on: continue over exec
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched=on,non-stop=off: single thread left
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched=on,non-stop=off: set scheduler-locking on
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched=on,non-stop=off: continue over exec
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched=off,non-stop=off: single thread left
new FAIL: gdb.threads/non-ldr-exc-2.exp: lock-sched=off,non-stop=off: continue over exec
new FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched=off,non-stop=on: thread 2
new FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched=off,non-stop=on: continue over exec
new FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched=on,non-stop=off: set scheduler-locking on
new FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched=on,non-stop=off: continue over exec
new FAIL: gdb.threads/non-ldr-exc-3.exp: lock-sched=off,non-stop=off: continue over exec
new FAIL: gdb.threads/non-ldr-exc-4.exp: lock-sched=off,non-stop=on: thread 2
new FAIL: gdb.threads/non-ldr-exc-4.exp: lock-sched=off,non-stop=on: continue over exec
new FAIL: gdb.threads/non-ldr-exc-4.exp: lock-sched=on,non-stop=off: set scheduler-locking on
new FAIL: gdb.threads/non-ldr-exc-4.exp: lock-sched=on,non-stop=off: continue over exec
new FAIL: gdb.threads/non-ldr-exc-4.exp: lock-sched=off,non-stop=off: continue over exec
new FAIL: gdb.threads/non-ldr-exit.exp: set scheduler-locking on
PASS -> FAIL: gdb.threads/print-threads.exp: all threads ran once
new FAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: Can't run to main
new FAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: Can't run to main
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock off: continue
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock off: stop with SIGUSR2
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock off: stop with SIGUSR1
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: stop with SIGUSR2
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: stop with SIGUSR1
PASS -> FAIL: gdb.threads/signal-command-multiple-signals-pending.exp: schedlock on: no more signals
PASS -> FAIL: gdb.threads/signal-delivered-right-thread.exp: continue: stop with SIGUSR1
PASS -> FAIL: gdb.threads/signal-delivered-right-thread.exp: signal 0: stop with SIGUSR1
PASS -> FAIL: gdb.threads/stepi-random-signal.exp: continue to breakpoint: after pthread_kill
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.threads/tls.exp: continue to third thread
PASS -> FAIL: gdb.threads/tls.exp: third thread print me
PASS -> FAIL: gdb.threads/tls.exp: continue to synch point
PASS -> FAIL: gdb.threads/tls.exp: threads exited
============================

Failures on Fedora-i686, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/3605>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-i686/.git/tree/?h=gdb-7.11-branch&id=8208220fd5d63238b97da240e16feda23c752ce5>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/catch-syscall.exp: multiple targets: insert catch syscall on syscall 1 -- write on i386:x86-64
PASS -> FAIL: gdb.base/corefile.exp: core-file warning-free
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.python/py-finish-breakpoint2.exp: set FinishBP after the exception
new FAIL: gdb.python/py-finish-breakpoint2.exp: check FinishBreakpoint in catch
new FAIL: gdb.python/py-finish-breakpoint2.exp: check finish BP removal
new FAIL: gdb.python/py-finish-breakpoint2.exp: continue to second exception
PASS -> FAIL: gdb.threads/thread-specific-bp.exp: non-stop: continue to end
============================

Failures on Fedora-x86_64-native-gdbserver-m32, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m32/builds/3591>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-gdbserver-m32/.git/tree/?h=gdb-7.11-branch&id=16847cc63b245b13f882a034f03e5b124fca6dab>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 11: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 12: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.threads/tls.exp: thread 4 up
PASS -> FAIL: gdb.threads/tls.exp: thread 3 up
new FAIL: gdb.threads/tls.exp: mess at end
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
PASS -> FAIL: gdb.base/interrupt.exp: continue
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/range-stepping.exp: interrupt: send ctrl-c to GDB: 1 vCont;r
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.mi/mi-detach.exp: detach
PASS -> FAIL: gdb.python/py-finish-breakpoint2.exp: set FinishBP after the exception
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder
PASS -> FAIL: gdb.threads/clone-thread_db.exp: continue to end
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 0: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 11: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 12: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: caught interrupt
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=on: inferior 1 exited
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=on: inferior 1 exited
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: next
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.threads/tls.exp: continue to synch point
PASS -> FAIL: gdb.threads/tls.exp: thread 4 up
PASS -> FAIL: gdb.threads/tls.exp: thread 3 up
PASS -> FAIL: gdb.threads/tls.exp: threads exited
new FAIL: gdb.threads/tls.exp: mess at end
PASS -> FAIL: gdb.trace/collection.exp: collect register locals collectively: collected local char
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: tfile: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================

Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/3589>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-x86_64-native-extended-gdbserver-m32/.git/tree/?h=gdb-7.11-branch&id=7f9b0e9f58ea378ce8e027a6c1d23db42190e0ae>

*** Regressions found ***
============================
PASS -> FAIL: gdb.ada/win_fu_syms.exp: compilation foo.adb
PASS -> FAIL: gdb.base/interrupt.exp: continue
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 11: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 12: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: get thread number
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
new FAIL: gdb.threads/tls.exp: thread 4 up
new FAIL: gdb.threads/tls.exp: Too many threads left at end
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.ada/win_fu_syms.exp: compilation foo.adb
PASS -> FAIL: gdb.arch/i386-signal.exp: backtrace 10
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell
PASS -> FAIL: gdb.base/annota1.exp: run until main breakpoint
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: break4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
PASS -> FAIL: gdb.base/interrupt.exp: continue
new FAIL: gdb.base/interrupt.exp: echo data
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT
new FAIL: gdb.base/interrupt.exp: echo more data
new FAIL: gdb.base/interrupt.exp: send end of file
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/store.exp: var charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/store.exp: upvar charest l; print old r, expecting -2 .*
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5
PASS -> FAIL: gdb.cp/annota2.exp: annotate-quit
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.fortran/library-module.exp: print var_i in lib
new FAIL: gdb.fortran/library-module.exp: print var_i in main
PASS -> FAIL: gdb.python/py-finish-breakpoint2.exp: set FinishBP after the exception
new FAIL: gdb.python/py-unwind.exp: continue to breakpoint: break backtrace-broken
new FAIL: gdb.python/py-unwind.exp: Backtrace restored by unwinder
PASS -> FAIL: gdb.threads/clone-thread_db.exp: continue to end
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 0: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 1: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 2: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 3: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 4: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 5: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 6: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 7: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 8: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 9: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 10: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 11: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 11: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 12: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 12: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 13: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 13: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 14: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 14: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 15: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 15: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 16: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 16: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 17: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 17: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 18: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 18: caught interrupt
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: set break in tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: continue to tight loop
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: get thread number
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: switch to non-event thread
new FAIL: gdb.threads/continue-pending-status.exp: attempt 19: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/continue-pending-status.exp: attempt 19: caught interrupt
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=on: inferior 1 exited
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=on: inferior 1 exited
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr3: continue to sigusr1_handler
PASS -> FAIL: gdb.threads/tls.exp: continue to synch point
PASS -> FAIL: gdb.threads/tls.exp: thread 4 up
PASS -> FAIL: gdb.threads/tls.exp: threads exited
new FAIL: gdb.threads/tls.exp: Too many threads left at end
PASS -> FAIL: gdb.trace/collection.exp: collect register locals collectively: collected local char
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: tfile: print locc
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================

Failures on Debian-s390x-m64, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	debian-wheezy-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-m64/builds/2295>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-s390x-m64/.git/tree/?h=gdb-7.11-branch&id=5dabd6b78e24184ddd2823abf40408d6f01b39ca>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/s390-multiarch.exp: compile
new FAIL: gdb.arch/s390-tdbregs.exp: compile failed
new FAIL: gdb.base/call-sc.exp: value foo returned; return call-sc-tld
new FAIL: gdb.base/catch-syscall.exp: mid-vfork: syscall vfork has returned
new FAIL: gdb.base/catch-syscall.exp: execve: syscall execve has returned
new FAIL: gdb.base/catch-syscall.exp: execve: continue to main
new FAIL: gdb.base/catch-syscall.exp: execve: continue until exit
new FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/dfp-test.exp: Correct _Decimal128 return value from called function.
new FAIL: gdb.base/longjmp.exp: next over longjmp
new FAIL: gdb.base/longjmp.exp: next over call_longjmp
new FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
new FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
new FAIL: gdb.cp/exceptprint.exp: string: print exception value at catch
PASS -> FAIL: gdb.cp/exceptprint.exp: int: print exception value at throw
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: reference to struct: print exception value at catch
new FAIL: gdb.cp/no-dmgl-verbose.exp: setting breakpoint at 'f
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/dw2-anon-mptr.exp: ptype crash
new FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
new FAIL: gdb.dwarf2/member-ptr-forwardref.exp: ptype c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.go/methods.exp: setting breakpoint at main.T.Foo
new FAIL: gdb.go/methods.exp: setting breakpoint at
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2
new FAIL: gdb.modula2/unbounded-array.exp: print unbounded array contents
new FAIL: gdb.opt/solib-intra-step.exp: second-hit
new FAIL: gdb.python/py-value-cc.exp: u's second field via field
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test2 forced_stabs
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test forced_stabs
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/watchthreads.exp: threaded watch loop
PASS -> FAIL: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
new FAIL: gdb.trace/tfile.exp: tfind 0 on trace file
============================

Failures on Debian-s390x-native-extended-gdbserver-m64, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	debian-wheezy-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-extended-gdbserver-m64/builds/2309>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-s390x-native-extended-gdbserver-m64/.git/tree/?h=gdb-7.11-branch&id=6aa402cf7f036e785abc9b87aa8f2579ee91086d>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/s390-multiarch.exp: compile
new FAIL: gdb.arch/s390-tdbregs.exp: compile failed
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell
PASS -> FAIL: gdb.base/annota1.exp: run until main breakpoint
new FAIL: gdb.base/async-shell.exp: run &
new FAIL: gdb.base/async-shell.exp: interrupt
new FAIL: gdb.base/async-shell.exp: process stopped
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: symbol-less: ld.so exit
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: symbol-less: seen displacement message as NONZERO
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkNOdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: symbol-less: ld.so exit
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: symbol-less: seen displacement message as PRESENT
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugNO: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieNO: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkNOdebugNOpieYES: symbol-less: entry point reached
new FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugNOpieYES: symbol-less: entry point reached
new FAIL: gdb.base/call-sc.exp: value foo returned; return call-sc-tld
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called close
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall close has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called chroot
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall chroot has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called pipe
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall pipe has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called write
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall write has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called read
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall read has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called vfork
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall vfork has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: ENOSYS: program has called 123456789
new FAIL: gdb.base/catch-syscall.exp: without arguments: ENOSYS: syscall 123456789 has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called exit_group
new FAIL: gdb.base/catch-syscall.exp: without arguments: continue until exit
new FAIL: gdb.base/catch-syscall.exp: with arguments: program has called close
new FAIL: gdb.base/catch-syscall.exp: with arguments: syscall close has returned
new FAIL: gdb.base/catch-syscall.exp: with arguments: continue until exit
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called close
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall close has returned
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called chroot
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall chroot has returned
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called pipe
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall pipe has returned
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called write
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall write has returned
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called read
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall read has returned
new FAIL: gdb.base/catch-syscall.exp: with many arguments: continue until exit
new FAIL: gdb.base/catch-syscall.exp: wrong args: continue until exit at catch syscall with unused syscall
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry: program has called chroot
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: program has called chroot
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: syscall chroot has returned
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: continue until exit
new FAIL: gdb.base/catch-syscall.exp: skipping return: entry: program has called write
new FAIL: gdb.base/catch-syscall.exp: skipping return: entry/return: program has called read
new FAIL: gdb.base/catch-syscall.exp: skipping return: entry/return: syscall read has returned
new FAIL: gdb.base/catch-syscall.exp: skipping return: entry/return: continue until exit
new FAIL: gdb.base/catch-syscall.exp: mid-vfork: syscall vfork has returned
new FAIL: gdb.base/catch-syscall.exp: mid-vfork: continue until exit
new FAIL: gdb.base/catch-syscall.exp: execve: program has called execve
new FAIL: gdb.base/catch-syscall.exp: execve: syscall execve has returned
new FAIL: gdb.base/catch-syscall.exp: execve: continue to main
new FAIL: gdb.base/catch-syscall.exp: execve: continue until exit
new FAIL: gdb.base/catch-syscall.exp: without args noxml: close: program has called 6
new FAIL: gdb.base/catch-syscall.exp: without args noxml: close: syscall 6 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: chroot: program has called 61
new FAIL: gdb.base/catch-syscall.exp: without args noxml: chroot: syscall 61 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: pipe: program has called 42
new FAIL: gdb.base/catch-syscall.exp: without args noxml: pipe: syscall 42 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: write: program has called 4
new FAIL: gdb.base/catch-syscall.exp: without args noxml: write: syscall 4 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: read: program has called 3
new FAIL: gdb.base/catch-syscall.exp: without args noxml: read: syscall 3 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: program has called vfork
new FAIL: gdb.base/catch-syscall.exp: without args noxml: syscall vfork has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: ENOSYS: program has called 123456789
new FAIL: gdb.base/catch-syscall.exp: without args noxml: ENOSYS: syscall 123456789 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: program has called 248
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 6
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 6 has returned
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 61
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 61 has returned
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 42
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 42 has returned
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 4
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 4 has returned
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 3
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 3 has returned
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: break2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 57
new FAIL: gdb.base/checkpoint-ns.exp: break3 one
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 49
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: continue
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 59
new FAIL: gdb.base/checkpoint-ns.exp: break4 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: delete copy1
new FAIL: gdb.base/checkpoint-ns.exp: delete all breakpoints in delete_breakpoints
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
PASS -> FAIL: gdb.base/checkpoint-ns.exp: kill all one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 0
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 1
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 2
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 3
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 4
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 5
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 6
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 7
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 8
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 9
PASS -> FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 10
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/checkpoint.exp: info checkpoints one
PASS -> FAIL: gdb.base/checkpoint.exp: break2 one
new FAIL: gdb.base/checkpoint.exp: restart 1 one
new FAIL: gdb.base/checkpoint.exp: verify i 1 one
new FAIL: gdb.base/checkpoint.exp: step in 1 one
PASS -> FAIL: gdb.base/checkpoint.exp: verify lines 1 one
new FAIL: gdb.base/checkpoint.exp: restart 2 one
new FAIL: gdb.base/checkpoint.exp: step in 2 one
new FAIL: gdb.base/checkpoint.exp: verify i 2 one
new FAIL: gdb.base/checkpoint.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint.exp: restart 3 one
new FAIL: gdb.base/checkpoint.exp: step in 3 one
new FAIL: gdb.base/checkpoint.exp: verify i 3 one
new FAIL: gdb.base/checkpoint.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint.exp: restart 4 one
new FAIL: gdb.base/checkpoint.exp: step in 4 one
new FAIL: gdb.base/checkpoint.exp: verify i 4 one
new FAIL: gdb.base/checkpoint.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint.exp: restart 5 one
new FAIL: gdb.base/checkpoint.exp: step in 5 one
new FAIL: gdb.base/checkpoint.exp: verify i 5 one
new FAIL: gdb.base/checkpoint.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint.exp: restart 6 one
new FAIL: gdb.base/checkpoint.exp: step in 6 one
new FAIL: gdb.base/checkpoint.exp: verify i 6 one
new FAIL: gdb.base/checkpoint.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint.exp: restart 7 one
new FAIL: gdb.base/checkpoint.exp: step in 7 one
new FAIL: gdb.base/checkpoint.exp: verify i 7 one
new FAIL: gdb.base/checkpoint.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint.exp: restart 8 one
new FAIL: gdb.base/checkpoint.exp: step in 8 one
new FAIL: gdb.base/checkpoint.exp: verify i 8 one
new FAIL: gdb.base/checkpoint.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint.exp: restart 9 one
new FAIL: gdb.base/checkpoint.exp: step in 9 one
new FAIL: gdb.base/checkpoint.exp: verify i 9 one
new FAIL: gdb.base/checkpoint.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint.exp: restart 10 one
new FAIL: gdb.base/checkpoint.exp: step in 10 one
new FAIL: gdb.base/checkpoint.exp: verify i 10 one
new FAIL: gdb.base/checkpoint.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint.exp: restart 0 one
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 57
new FAIL: gdb.base/checkpoint.exp: break3 one
new FAIL: gdb.base/checkpoint.exp: Diff input and output one
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 49
new FAIL: gdb.base/checkpoint.exp: restart 1 two
new FAIL: gdb.base/checkpoint.exp: continue
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 1 one
new FAIL: gdb.base/checkpoint.exp: step in 1 two
new FAIL: gdb.base/checkpoint.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint.exp: restart 2 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 2 one
new FAIL: gdb.base/checkpoint.exp: step in 2 two
new FAIL: gdb.base/checkpoint.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint.exp: restart 3 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 3 one
new FAIL: gdb.base/checkpoint.exp: step in 3 two
new FAIL: gdb.base/checkpoint.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint.exp: restart 4 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 4 one
new FAIL: gdb.base/checkpoint.exp: step in 4 two
new FAIL: gdb.base/checkpoint.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint.exp: restart 5 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 5 one
new FAIL: gdb.base/checkpoint.exp: step in 5 two
new FAIL: gdb.base/checkpoint.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint.exp: restart 6 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 6 one
new FAIL: gdb.base/checkpoint.exp: step in 6 two
new FAIL: gdb.base/checkpoint.exp: restart 7 two
new FAIL: gdb.base/checkpoint.exp: breakpoint 1 7 one
new FAIL: gdb.base/checkpoint.exp: step in 7 two
new FAIL: gdb.base/checkpoint.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint.exp: Diff input and output two
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 59
new FAIL: gdb.base/checkpoint.exp: break4 one
PASS -> FAIL: gdb.base/checkpoint.exp: delete copy1
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints
new FAIL: gdb.base/checkpoint.exp: restart 1 three
new FAIL: gdb.base/checkpoint.exp: break2 1 one
new FAIL: gdb.base/checkpoint.exp: outfile still open 1
new FAIL: gdb.base/checkpoint.exp: restart 2 three
new FAIL: gdb.base/checkpoint.exp: break2 2 one
new FAIL: gdb.base/checkpoint.exp: outfile still open 2
new FAIL: gdb.base/checkpoint.exp: restart 3 three
new FAIL: gdb.base/checkpoint.exp: break2 3 one
new FAIL: gdb.base/checkpoint.exp: outfile still open 3
new FAIL: gdb.base/checkpoint.exp: restart 4 three
new FAIL: gdb.base/checkpoint.exp: break2 4 one
new FAIL: gdb.base/checkpoint.exp: outfile still open 4
new FAIL: gdb.base/checkpoint.exp: restart 5 three
new FAIL: gdb.base/checkpoint.exp: break2 5 one
new FAIL: gdb.base/checkpoint.exp: outfile still open 5
new FAIL: gdb.base/checkpoint.exp: restart 6 three
new FAIL: gdb.base/checkpoint.exp: break2 6 one
new FAIL: gdb.base/checkpoint.exp: outfile still open 6
new FAIL: gdb.base/checkpoint.exp: restart 7 three
new FAIL: gdb.base/checkpoint.exp: break2 7 one
new FAIL: gdb.base/checkpoint.exp: outfile still open 7
new FAIL: gdb.base/checkpoint.exp: restart 8 three
new FAIL: gdb.base/checkpoint.exp: break2 8 one
new FAIL: gdb.base/checkpoint.exp: outfile still open 8
new FAIL: gdb.base/checkpoint.exp: restart 9 three
new FAIL: gdb.base/checkpoint.exp: break2 9 one
new FAIL: gdb.base/checkpoint.exp: outfile still open 9
new FAIL: gdb.base/checkpoint.exp: restart 10 three
new FAIL: gdb.base/checkpoint.exp: break2 10 one
new FAIL: gdb.base/checkpoint.exp: outfile still open 10
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork two
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork three
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork four
new FAIL: gdb.base/checkpoint.exp: Exit, dropped into next fork five
new FAIL: gdb.base/checkpoint.exp: info checkpoints two
PASS -> FAIL: gdb.base/checkpoint.exp: kill all one
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 0
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 1
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 2
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 3
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 4
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 5
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 6
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 7
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 8
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 9
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 10
new FAIL: gdb.base/checkpoint.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/commands.exp: continue with watch
new FAIL: gdb.base/corefile.exp: run: with core
new FAIL: gdb.base/corefile.exp: run: core file is cleared
new FAIL: gdb.base/corefile.exp: attach: with core
new FAIL: gdb.base/corefile.exp: attach: core file is cleared
new FAIL: gdb.base/corefile.exp: core-file warning-free
new FAIL: gdb.base/dfp-test.exp: Correct _Decimal128 return value from called function.
new FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp
new FAIL: gdb.base/display.exp: next hit
new FAIL: gdb.base/find-unmapped.exp: find global_var_0, global_var_2, 0xff
new FAIL: gdb.base/find-unmapped.exp: find global_var_1, global_var_2, 0xff
new FAIL: gdb.base/find-unmapped.exp: find global_var_2,
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
new FAIL: gdb.base/longjmp.exp: next over longjmp
new FAIL: gdb.base/longjmp.exp: next over call_longjmp
new FAIL: gdb.base/pr11022.exp: breakpoint hit
new FAIL: gdb.base/pr11022.exp: watchpoint hit
new FAIL: gdb.base/pr11022.exp: breakpoint hit 2
new FAIL: gdb.base/pr11022.exp: watchpoint hit 2
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse
new FAIL: gdb.base/recurse.exp: next over b = 0 in second instance
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
new FAIL: gdb.base/solib-corrupted.exp: corrupted list
new FAIL: gdb.base/solib-nodir.exp: library loaded
new FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
new FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
new FAIL: gdb.base/term.exp: info terminal at breakpoint
new FAIL: gdb.base/testenv.exp: Test no TEST_GDB var
new FAIL: gdb.base/testenv.exp: Test with one TEST_GDB var
new FAIL: gdb.base/testenv.exp: Test with two TEST_GDB var
new FAIL: gdb.base/testenv.exp: Test with one TEST_GDB var, after unset
new FAIL: gdb.base/testenv.exp: Test with TEST_GDB_GLOBAL
new FAIL: gdb.base/testenv.exp: Test with TEST_GDB_GLOBAL unset
new FAIL: gdb.base/value-double-free.exp: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: continue until exit
new FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
new FAIL: gdb.base/watchpoint-hw.exp: start
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
new FAIL: gdb.base/watchpoint-solib.exp: continue to foo again
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint at func1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
new FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: back at main from marker1
new FAIL: gdb.base/watchpoint.exp: next to `for' in watchpoint.exp
new FAIL: gdb.base/watchpoint.exp: until to ival1 assignment
new FAIL: gdb.base/watchpoint.exp: until to ival3 assignment
new FAIL: gdb.base/watchpoint.exp: until out of loop
new FAIL: gdb.base/watchpoint.exp: step to ival2 assignment
new FAIL: gdb.base/watchpoint.exp: Test complex watchpoint
new FAIL: gdb.base/watchpoint.exp: did not trigger wrong watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here
new FAIL: gdb.base/watchpoint.exp: trigger local watch
new FAIL: gdb.base/watchpoint.exp: self-delete local watch
new FAIL: gdb.base/watchpoint.exp: trigger1 partially local watch
new FAIL: gdb.base/watchpoint.exp: trigger2 partially local watch
new FAIL: gdb.base/watchpoint.exp: self-delete partially local watch
new FAIL: gdb.base/watchpoint.exp: trigger static local watch
new FAIL: gdb.base/watchpoint.exp: continue after trigger static local watch
new FAIL: gdb.base/watchpoint.exp: cont
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint
new FAIL: gdb.base/watchpoint.exp: global_ptr next
new FAIL: gdb.base/watchpoint.exp: next over ptr init
new FAIL: gdb.base/watchpoint.exp: next over buffer set
new FAIL: gdb.base/watchpoint.exp: global_ptr_ptr next
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr init
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr buffer set
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr pointer advance
new FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 5
new FAIL: gdb.cp/annota2.exp: continue until exit
new FAIL: gdb.cp/annota2.exp: delete bps
new FAIL: gdb.cp/annota2.exp: break at main
new FAIL: gdb.cp/annota2.exp: set watch on a.x
new FAIL: gdb.cp/annota2.exp: watch triggered on a.x
new FAIL: gdb.cp/annota2.exp: annotate-quit
new FAIL: gdb.cp/annota3.exp: continue to exit
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x
new FAIL: gdb.cp/annota3.exp: annotate-quit
new FAIL: gdb.cp/exceptprint.exp: string: print exception value at catch
PASS -> FAIL: gdb.cp/exceptprint.exp: int: print exception value at throw
new FAIL: gdb.cp/exceptprint.exp: int: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: struct: print exception value at catch
new FAIL: gdb.cp/exceptprint.exp: reference to struct: print exception value at catch
new FAIL: gdb.cp/no-dmgl-verbose.exp: setting breakpoint at 'f
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/dw2-anon-mptr.exp: ptype crash
new FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
new FAIL: gdb.dwarf2/member-ptr-forwardref.exp: ptype c
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in lib
PASS -> FAIL: gdb.fortran/library-module.exp: print var_i in main
new FAIL: gdb.gdb/python-interrupts.exp: signal SIGINT
new FAIL: gdb.gdb/python-selftest.exp: call catch_command_errors
new FAIL: gdb.go/methods.exp: setting breakpoint at main.T.Foo
new FAIL: gdb.go/methods.exp: setting breakpoint at
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf continue, agent
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent
PASS -> FAIL: gdb.mi/mi-dprintf.exp: mi set dprintf style to an unrecognized type
new FAIL: gdb.mi/mi-pending.exp: MI pending breakpoint on mi-pendshr.c:pendfunc2 if x==4
PASS -> FAIL: gdb.mi/mi-vla-fortran.exp: evaluate not associated vla
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2
new FAIL: gdb.modula2/unbounded-array.exp: print unbounded array contents
new FAIL: gdb.opt/solib-intra-step.exp: second-hit
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
new FAIL: gdb.python/py-events.exp: get current thread
new FAIL: gdb.python/py-evsignal.exp: Signal Thread 3
new FAIL: gdb.python/py-evthreads.exp: Run to breakpoint 1
new FAIL: gdb.python/py-evthreads.exp: reached breakpoint 2
new FAIL: gdb.python/py-evthreads.exp: thread 2
new FAIL: gdb.python/py-evthreads.exp: reached breakpoint 3
new FAIL: gdb.python/py-evthreads.exp: thread 3
new FAIL: gdb.python/py-evthreads.exp: continue thread 1
new FAIL: gdb.python/py-evthreads.exp: thread 3 was signaled
new FAIL: gdb.python/py-value-cc.exp: u's second field via field
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test2 forced_stabs
new FAIL: gdb.stabs/gdb11479.exp: Inspect t in test forced_stabs
new FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=1: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint triggers
new FAIL: gdb.threads/local-watch-wrong-thread.exp: the other thread stopped on breakpoint
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint still triggers
new FAIL: gdb.threads/local-watch-wrong-thread.exp: local watchpoint automatically deleted
new FAIL: gdb.threads/staticthreads.exp: tlsvar in thread
new FAIL: gdb.threads/staticthreads.exp: tlsvar in main
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/thread_events.exp: continue to after_join_func with messages enabled
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: hardware breakpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: hardware breakpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchthreads.exp: threaded watch loop
new FAIL: gdb.threads/watchthreads.exp: first watchpoint on args[0] hit
new FAIL: gdb.threads/watchthreads.exp: first watchpoint on args[1] hit
new FAIL: gdb.threads/watchthreads.exp: watchpoint on args[0] hit in thread
new FAIL: gdb.threads/watchthreads.exp: watchpoint on args[1] hit in thread
new FAIL: gdb.threads/watchthreads.exp: combination of threaded watchpoints = 30
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
new FAIL: gdb.threads/wp-replication.exp: No hardware watchpoints available
new FAIL: gdb.trace/tfile.exp: tfind 0 on trace file
============================

Failures on Debian-i686, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686/builds/3506>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686/.git/tree/?h=gdb-7.11-branch&id=541c504ca3b9f99032477f094a090e75fc15ca01>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/jit.exp: one_jit_test-1: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/jit.exp: one_jit_test-2: continue to breakpoint: break here 2
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: continue to breakpoint: break here 2
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 1
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: detach
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: attach
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 0
PASS -> FAIL: gdb.base/jit.exp: PIE: one_jit_test-1: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: force loop break in thread 2
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: stepped thread under control
============================

Failures on Debian-i686-native-extended-gdbserver, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	wildebeest-debian-wheezy-i686

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-i686-native-extended-gdbserver/builds/3486>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Debian-i686-native-extended-gdbserver/.git/tree/?h=gdb-7.11-branch&id=c46e63437cc89df0b1fbf3165f649d1ec27437cc>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/access_to_packed_array.exp: compilation foo.adb
new FAIL: gdb.ada/fin_fun_out.exp: compilation foo_o525_013.adb
new FAIL: gdb.ada/fun_overload_menu.exp: multiple matches for p
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/out_of_line_in_inlined.exp: compilation foo_o224_021.adb
new FAIL: gdb.ada/rec_comp.exp: whatis r.ia
new FAIL: gdb.ada/rec_comp.exp: ptype r
new FAIL: gdb.ada/var_arr_typedef.exp: compilation var_arr_typedef.adb
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: go to breakpoint 1
new FAIL: gdb.arch/disp-step-insn-reloc.exp: can_relocate_jump: relocated instruction
new FAIL: gdb.arch/ftrace-insn-reloc.exp: relocated instruction at can_relocate_jump
new FAIL: gdb.arch/ftrace-insn-reloc.exp: check on trace status
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g0
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g1
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g2
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g3
PASS -> FAIL: gdb.arch/i386-sse-stack-align.exp: print g4
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell
PASS -> FAIL: gdb.base/annota1.exp: run until main breakpoint
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: seen displacement message as NONZERO
PASS -> FAIL: gdb.base/break-interp.exp: LDprelinkYESdebugIN: BINprelinkYESdebugSEPpieATTACH: attach-relinkNO: attach main bt
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: break3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: break4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork one
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
PASS -> FAIL: gdb.base/foll-exec.exp: print follow-exec/local_k
PASS -> FAIL: gdb.base/foll-exec.exp: step through execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execlp call
PASS -> FAIL: gdb.base/foll-exec.exp: print execd-program/global_i
PASS -> FAIL: gdb.base/foll-exec.exp: step through execl call
PASS -> FAIL: gdb.base/foll-exec.exp: step after execl call
PASS -> FAIL: gdb.base/gnu-ifunc.exp: step
PASS -> FAIL: gdb.base/jit.exp: one_jit_test-1: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/jit.exp: one_jit_test-2: continue to breakpoint: break here 2
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: continue to breakpoint: break here 2
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 1
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: detach
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: attach
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 0
PASS -> FAIL: gdb.base/jit.exp: PIE: one_jit_test-1: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.guile/guile.exp: source source2.scm
PASS -> FAIL: gdb.guile/guile.exp: source -s source2.scm
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'escape
new FAIL: gdb.guile/scm-value.exp: value->string with default #:errors = 'substitute
PASS -> FAIL: gdb.threads/forking-threads-plus-breakpoint.exp: cond_bp_target=0: detach_on_fork=on: displaced=off: inferior 1 exited
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: signal thr1: continue to sigusr1_handler
============================

Failures on Fedora-ppc64be-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-cc-with-index/builds/3537>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=915b96134bc6f10c9a703e719ef2cea5f3cc87b1>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
new FAIL: gdb.base/catch-syscall.exp: execve: syscall execve has returned
new FAIL: gdb.base/catch-syscall.exp: execve: continue to main
new FAIL: gdb.base/catch-syscall.exp: execve: continue until exit
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
PASS -> FAIL: gdb.base/display.exp: first disp
PASS -> FAIL: gdb.base/display.exp: second disp
PASS -> FAIL: gdb.base/display.exp: info disp
PASS -> FAIL: gdb.base/display.exp: next hit
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
PASS -> FAIL: gdb.base/display.exp: watch off
PASS -> FAIL: gdb.base/display.exp: finish
PASS -> FAIL: gdb.base/display.exp: step
PASS -> FAIL: gdb.base/display.exp: cont
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: info function ^jit_function
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
PASS -> FAIL: gdb.base/step-over-no-symbols.exp: displaced=auto: advanced
PASS -> FAIL: gdb.base/value-double-free.exp: continue
PASS -> FAIL: gdb.base/value-double-free.exp: print empty
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
PASS -> FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
PASS -> FAIL: gdb.base/watchpoint.exp: continue to marker2
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
PASS -> FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
PASS -> FAIL: gdb.base/watchpoint.exp: cont
PASS -> FAIL: gdb.base/watchpoint.exp: next past local_x initialization
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch -location
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo2
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo4
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
PASS -> FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable
PASS -> FAIL: gdb.base/watch-read.exp: write watchpoint triggers
PASS -> FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
PASS -> FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5
PASS -> FAIL: gdb.cp/annota3.exp: watch triggered on a.x
PASS -> FAIL: gdb.cp/annota3.exp: annotate-quit
PASS -> FAIL: gdb.cp/gdb2495.exp: info breakpoints
new FAIL: gdb.cp/gdb2495.exp:
PASS -> FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag
PASS -> FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off..
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g
PASS -> FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data
============================

Failures on Fedora-ppc64be-m64, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-m64/builds/3543>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-m64/.git/tree/?h=gdb-7.11-branch&id=84159d26f1e4d30d68082cafd657479dbf9fcb07>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/fun_renaming.exp: print n
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
new FAIL: gdb.base/catch-syscall.exp: execve: syscall execve has returned
new FAIL: gdb.base/catch-syscall.exp: execve: continue to main
new FAIL: gdb.base/catch-syscall.exp: execve: continue until exit
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one
PASS -> FAIL: gdb.base/display.exp: first disp
PASS -> FAIL: gdb.base/display.exp: second disp
PASS -> FAIL: gdb.base/display.exp: info disp
PASS -> FAIL: gdb.base/display.exp: next hit
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
PASS -> FAIL: gdb.base/display.exp: watch off
PASS -> FAIL: gdb.base/display.exp: finish
PASS -> FAIL: gdb.base/display.exp: step
PASS -> FAIL: gdb.base/display.exp: cont
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
new FAIL: gdb.base/jit.exp: attach: one_jit_test-2: info function ^jit_function
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
PASS -> FAIL: gdb.base/step-over-no-symbols.exp: displaced=auto: advanced
PASS -> FAIL: gdb.base/value-double-free.exp: continue
PASS -> FAIL: gdb.base/value-double-free.exp: print empty
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
PASS -> FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
PASS -> FAIL: gdb.base/watchpoint.exp: continue to marker2
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
PASS -> FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
PASS -> FAIL: gdb.base/watchpoint.exp: cont
PASS -> FAIL: gdb.base/watchpoint.exp: next past local_x initialization
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch -location
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo2
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo4
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
PASS -> FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable
PASS -> FAIL: gdb.base/watch-read.exp: write watchpoint triggers
PASS -> FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
PASS -> FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5
PASS -> FAIL: gdb.cp/annota3.exp: watch triggered on a.x
PASS -> FAIL: gdb.cp/annota3.exp: annotate-quit
PASS -> FAIL: gdb.cp/gdb2495.exp: info breakpoints
new FAIL: gdb.cp/gdb2495.exp:
PASS -> FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag
PASS -> FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off..
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g
PASS -> FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data
============================

Failures on Fedora-ppc64be-native-gdbserver-m64, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64be-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64be-native-gdbserver-m64/builds/3535>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64be-native-gdbserver-m64/.git/tree/?h=gdb-7.11-branch&id=64563abb01dd0247d0d6381f3f25d73fa7e560d7>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
new FAIL: gdb.ada/array_return.exp: value printed by finish of Create_Small
new FAIL: gdb.ada/array_return.exp: value printed by finish of Create_Large
new FAIL: gdb.ada/array_return.exp: value printed by finish of Create_Small_Float_Vector
new FAIL: gdb.ada/call_pn.exp: print pn
new FAIL: gdb.ada/call_pn.exp: print last_node_id after calling pn
new FAIL: gdb.ada/fun_renaming.exp: print n
new FAIL: gdb.ada/interface.exp: print s
new FAIL: gdb.ada/iwide.exp: print My_Drawable
new FAIL: gdb.ada/iwide.exp: print s_access.all
new FAIL: gdb.ada/iwide.exp: print sp_access.all
new FAIL: gdb.ada/iwide.exp: print d_access.all
new FAIL: gdb.ada/iwide.exp: print dp_access.all
new FAIL: gdb.ada/mi_interface.exp: Create ggg1 varobj
new FAIL: gdb.ada/mi_interface.exp: list ggg1's children
new FAIL: gdb.ada/ptype_tagged_param.exp: ptype s
new FAIL: gdb.ada/ref_param.exp: frame argument value printed
new FAIL: gdb.ada/set_pckd_arr_elt.exp: continue to update_small
new FAIL: gdb.ada/tagged_access.exp: ptype c.all
new FAIL: gdb.ada/tagged_access.exp: ptype c.menu_name
new FAIL: gdb.ada/tagged.exp: ptype obj
new FAIL: gdb.ada/tagged.exp: print obj
new FAIL: gdb.ada/watch_arg.exp: Continuing to second breakpoint
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
new FAIL: gdb.base/callfuncs.exp: print *
new FAIL: gdb.base/callfuncs.exp: noproto: print *
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called close
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall close has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called chroot
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall chroot has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called pipe
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall pipe has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called write
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall write has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called read
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall read has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called vfork
new FAIL: gdb.base/catch-syscall.exp: without arguments: syscall vfork has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: ENOSYS: program has called 123456789
new FAIL: gdb.base/catch-syscall.exp: without arguments: ENOSYS: syscall 123456789 has returned
new FAIL: gdb.base/catch-syscall.exp: without arguments: program has called exit_group
new FAIL: gdb.base/catch-syscall.exp: without arguments: continue until exit
new FAIL: gdb.base/catch-syscall.exp: with arguments: program has called close
new FAIL: gdb.base/catch-syscall.exp: with arguments: syscall close has returned
new FAIL: gdb.base/catch-syscall.exp: with arguments: continue until exit
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called close
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall close has returned
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called chroot
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall chroot has returned
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called pipe
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall pipe has returned
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called write
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall write has returned
new FAIL: gdb.base/catch-syscall.exp: with many arguments: program has called read
new FAIL: gdb.base/catch-syscall.exp: with many arguments: syscall read has returned
new FAIL: gdb.base/catch-syscall.exp: with many arguments: continue until exit
new FAIL: gdb.base/catch-syscall.exp: wrong args: continue until exit at catch syscall with unused syscall
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry: program has called chroot
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: program has called chroot
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: syscall chroot has returned
new FAIL: gdb.base/catch-syscall.exp: restarting inferior: entry/return: continue until exit
new FAIL: gdb.base/catch-syscall.exp: skipping return: entry: program has called write
new FAIL: gdb.base/catch-syscall.exp: skipping return: entry/return: program has called read
new FAIL: gdb.base/catch-syscall.exp: skipping return: entry/return: syscall read has returned
new FAIL: gdb.base/catch-syscall.exp: skipping return: entry/return: continue until exit
new FAIL: gdb.base/catch-syscall.exp: mid-vfork: syscall vfork has returned
new FAIL: gdb.base/catch-syscall.exp: mid-vfork: continue until exit
new FAIL: gdb.base/catch-syscall.exp: execve: program has called execve
new FAIL: gdb.base/catch-syscall.exp: execve: syscall execve has returned
new FAIL: gdb.base/catch-syscall.exp: execve: continue to main
new FAIL: gdb.base/catch-syscall.exp: execve: continue until exit
new FAIL: gdb.base/catch-syscall.exp: without args noxml: close: program has called 6
new FAIL: gdb.base/catch-syscall.exp: without args noxml: close: syscall 6 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: chroot: program has called 61
new FAIL: gdb.base/catch-syscall.exp: without args noxml: chroot: syscall 61 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: pipe: program has called 42
new FAIL: gdb.base/catch-syscall.exp: without args noxml: pipe: syscall 42 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: write: program has called 4
new FAIL: gdb.base/catch-syscall.exp: without args noxml: write: syscall 4 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: read: program has called 3
new FAIL: gdb.base/catch-syscall.exp: without args noxml: read: syscall 3 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: program has called vfork
new FAIL: gdb.base/catch-syscall.exp: without args noxml: syscall vfork has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: ENOSYS: program has called 123456789
new FAIL: gdb.base/catch-syscall.exp: without args noxml: ENOSYS: syscall 123456789 has returned
new FAIL: gdb.base/catch-syscall.exp: without args noxml: program has called 234
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 6
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 6 has returned
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 61
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 61 has returned
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 42
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 42 has returned
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 4
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 4 has returned
new FAIL: gdb.base/catch-syscall.exp: with args noxml: program has called 3
new FAIL: gdb.base/catch-syscall.exp: with args noxml: syscall 3 has returned
new FAIL: gdb.base/commands.exp: continue with watch
new FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp
new FAIL: gdb.base/display.exp: next hit
new FAIL: gdb.base/func-ptrs.exp: continue to decr
new FAIL: gdb.base/func-ptrs.exp: stop in sentinel
new FAIL: gdb.base/func-ptrs.exp: move up to decr
new FAIL: gdb.base/func-ptrs.exp: go back to main from decr
new FAIL: gdb.base/func-ptrs.exp: set calc to incr
new FAIL: gdb.base/func-ptrs.exp: continue to incr, second time
new FAIL: gdb.base/func-ptrs.exp: go back to main from incr, second time
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
new FAIL: gdb.base/gdbindex-stabs.exp: list stabs_function
new FAIL: gdb.base/gnu-debugdata.exp: have symtab
PASS -> FAIL: gdb.base/interrupt.exp: continue
new FAIL: gdb.base/jit.exp: one_jit_test-1: info function ^jit_function
new FAIL: gdb.base/jit.exp: one_jit_test-2: info function ^jit_function
new FAIL: gdb.base/jit.exp: PIE: one_jit_test-1: info function ^jit_function
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 1
new FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2
new FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 1
new FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2
new FAIL: gdb.base/pc-fp.exp: info register pc fp
new FAIL: gdb.base/pr11022.exp: breakpoint hit
new FAIL: gdb.base/pr11022.exp: watchpoint hit
new FAIL: gdb.base/pr11022.exp: breakpoint hit 2
new FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to recurse
new FAIL: gdb.base/recurse.exp: next over b = 0 in second instance
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
new FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
new FAIL: gdb.base/step-over-no-symbols.exp: displaced=on: advanced
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: bar
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: foo
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: gdb_remove_symbol_file
new FAIL: gdb.base/sym-file.exp: info files must not display sym-file-lib
new FAIL: gdb.base/sym-file.exp: breakpoint at foo is pending
new FAIL: gdb.base/sym-file.exp: breakpoint at bar is pending
new FAIL: gdb.base/sym-file.exp: continue to breakpoint: reload
new FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: gdb_add_symbol_file
new FAIL: gdb.base/sym-file.exp: stale bkpts: add-symbol-file sym-file-lib.so addr
new FAIL: gdb.base/sym-file.exp: stale bkpts: breakpoint at baz is pending
new FAIL: gdb.base/sym-file.exp: stale bkpts: continue to breakpoint: end here
new FAIL: gdb.base/until-nodebug.exp: until 1
new FAIL: gdb.base/until-nodebug.exp: until 2
new FAIL: gdb.base/value-double-free.exp: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 0->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 4->10: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 10->3: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 3->2: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 2->1: print expression after
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: q.d + q.f + q.g: 1->0: continue
new FAIL: gdb.base/watch-bitfields.exp: regular watch against bitfields: continue until exit
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
new FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint at func1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
new FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: back at main from marker1
new FAIL: gdb.base/watchpoint.exp: next to `for' in watchpoint.exp
new FAIL: gdb.base/watchpoint.exp: until to ival1 assignment
new FAIL: gdb.base/watchpoint.exp: until to ival3 assignment
new FAIL: gdb.base/watchpoint.exp: until out of loop
new FAIL: gdb.base/watchpoint.exp: step to ival2 assignment
new FAIL: gdb.base/watchpoint.exp: Test complex watchpoint
new FAIL: gdb.base/watchpoint.exp: did not trigger wrong watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here
new FAIL: gdb.base/watchpoint.exp: trigger local watch
new FAIL: gdb.base/watchpoint.exp: self-delete local watch
new FAIL: gdb.base/watchpoint.exp: trigger1 partially local watch
new FAIL: gdb.base/watchpoint.exp: trigger2 partially local watch
new FAIL: gdb.base/watchpoint.exp: self-delete partially local watch
new FAIL: gdb.base/watchpoint.exp: trigger static local watch
new FAIL: gdb.base/watchpoint.exp: continue after trigger static local watch
new FAIL: gdb.base/watchpoint.exp: cont
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint
new FAIL: gdb.base/watchpoint.exp: global_ptr next
new FAIL: gdb.base/watchpoint.exp: next over ptr init
new FAIL: gdb.base/watchpoint.exp: next over buffer set
new FAIL: gdb.base/watchpoint.exp: global_ptr_ptr next
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr init
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr buffer set
new FAIL: gdb.base/watchpoint.exp: next over global_ptr_ptr pointer advance
new FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
new FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
new FAIL: gdb.base/watchpoint-solib.exp: continue to foo again
new FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler.
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame
PASS -> FAIL: gdb.cp/gdb2495.exp: info breakpoints
new FAIL: gdb.cp/gdb2495.exp:
PASS -> FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag
PASS -> FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off..
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/atomic-type.exp: ptype f
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype f
new FAIL: gdb.dwarf2/dw2-bad-mips-linkage-name.exp: ptype g
new FAIL: gdb.dwarf2/dw2-case-insensitive.exp: p fuNC_symtab
new FAIL: gdb.dwarf2/implptrpiece.exp: print/d p[-1]
new FAIL: gdb.mi/mi-async.exp: start: send
new FAIL: gdb.mi/mi-async.exp: start: stop
new FAIL: gdb.mi/mi-async.exp: CLI next: send
new FAIL: gdb.mi/mi-async.exp: CLI next: stop
new FAIL: gdb.mi/mi-async.exp: restart: send
new FAIL: gdb.mi/mi-async.exp: restart: stop
new FAIL: gdb.mi/mi-detach.exp: detach
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf continue, agent
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent
new FAIL: gdb.mi/mi-var-child.exp: listing of children, simple types: names, type and values, complex types: names and types
new FAIL: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr_ptr in natural
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger
new FAIL: gdb.mi/mi-watch-nonstop.exp: resume 1
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": breakpoint hit 2
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": breakpoint hit 2
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2
new FAIL: gdb.modula2/unbounded-array.exp: print unbounded array contents
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
new FAIL: gdb.python/py-framefilter.exp: bt for no debuginfo
new FAIL: gdb.python/py-framefilter.exp: bt full for no debuginfo
new FAIL: gdb.python/py-framefilter.exp: bt no filters for no debuginfo
new FAIL: gdb.python/py-framefilter.exp: bt no-filters full no debuginfo
new FAIL: gdb.python/py-objfile.exp: print main without debug info
new FAIL: gdb.python/python.exp: Test find_pc_line with resume address
new FAIL: gdb.python/py-value-cc.exp: u's second field via field
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
new FAIL: gdb.reverse/recvmsg-reverse.exp: continue to breakpoint: marker2
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.stabs/gdb11479.exp: Can't run to main forced_stabs
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=on: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: hardware breakpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: hardware breakpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
new FAIL: gdb.threads/wp-replication.exp: No hardware watchpoints available
new FAIL: gdb.trace/entry-values.exp: disassemble bar
new FAIL: gdb.trace/entry-values.exp: Find the call or branch instruction offset in bar
============================

Failures on Fedora-ppc64le-native-extended-gdbserver-m64, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-native-extended-gdbserver-m64/builds/3477>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-native-extended-gdbserver-m64/.git/tree/?h=gdb-7.11-branch&id=6a26d522cdbe86b7e13b6b248ba7364304b3425b>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
new FAIL: gdb.base/a2-run.exp: run "a2-run" with shell
PASS -> FAIL: gdb.base/annota1.exp: run until main breakpoint
new FAIL: gdb.base/attach.exp: cmdline attach run: run to main
PASS -> FAIL: gdb.base/checkpoint.exp: break1 five
new FAIL: gdb.base/checkpoint.exp: checkpoint
PASS -> FAIL: gdb.base/checkpoint.exp: break1 six
PASS -> FAIL: gdb.base/checkpoint.exp: break1 seven
PASS -> FAIL: gdb.base/checkpoint.exp: break1 eight
PASS -> FAIL: gdb.base/checkpoint.exp: break1 nine
PASS -> FAIL: gdb.base/checkpoint.exp: break1 ten
new FAIL: gdb.base/checkpoint.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.base/checkpoint.exp: break2 one
PASS -> FAIL: gdb.base/checkpoint.exp: verify lines 1 one
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 57
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 49
new FAIL: gdb.base/checkpoint.exp: continue
new FAIL: gdb.base/checkpoint.exp: setting breakpoint at 59
PASS -> FAIL: gdb.base/checkpoint.exp: delete copy1
PASS -> FAIL: gdb.base/checkpoint.exp: kill all one
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 0
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 1
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 2
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 3
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 4
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 5
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 6
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 7
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 8
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 9
PASS -> FAIL: gdb.base/checkpoint.exp: no more checkpoint 10
PASS -> FAIL: gdb.base/checkpoint-ns.exp: break1 six
new FAIL: gdb.base/checkpoint-ns.exp: checkpoint
PASS -> FAIL: gdb.base/checkpoint-ns.exp: break1 seven
PASS -> FAIL: gdb.base/checkpoint-ns.exp: break1 eight
PASS -> FAIL: gdb.base/checkpoint-ns.exp: break1 nine
PASS -> FAIL: gdb.base/checkpoint-ns.exp: break1 ten
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints one
new FAIL: gdb.base/checkpoint-ns.exp: delete all breakpoints in delete_breakpoints
new FAIL: gdb.base/checkpoint-ns.exp: break2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 2 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 3 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 4 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 5 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 6 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 6 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 7 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 8 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 8 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 9 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 9 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify i 10 one
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 10 one
new FAIL: gdb.base/checkpoint-ns.exp: restart 0 one
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 57
new FAIL: gdb.base/checkpoint-ns.exp: break3 one
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output one
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 49
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 two
new FAIL: gdb.base/checkpoint-ns.exp: continue
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 1 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 1 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 1 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 2 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 2 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 2 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 3 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 3 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 3 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 4 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 4 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 4 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 5 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 5 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 6 two
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 two
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one
new FAIL: gdb.base/checkpoint-ns.exp: step in 7 two
new FAIL: gdb.base/checkpoint-ns.exp: verify lines 7 two
new FAIL: gdb.base/checkpoint-ns.exp: Diff input and output two
new FAIL: gdb.base/checkpoint-ns.exp: setting breakpoint at 59
new FAIL: gdb.base/checkpoint-ns.exp: break4 one
new FAIL: gdb.base/checkpoint-ns.exp: delete copy1
new FAIL: gdb.base/checkpoint-ns.exp: restart 1 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 1 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 1
new FAIL: gdb.base/checkpoint-ns.exp: restart 2 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 2 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 2
new FAIL: gdb.base/checkpoint-ns.exp: restart 3 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 3 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 3
new FAIL: gdb.base/checkpoint-ns.exp: restart 4 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 4 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 4
new FAIL: gdb.base/checkpoint-ns.exp: restart 5 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 5 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 5
new FAIL: gdb.base/checkpoint-ns.exp: restart 6 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 6 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 6
new FAIL: gdb.base/checkpoint-ns.exp: restart 7 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 7 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 7
new FAIL: gdb.base/checkpoint-ns.exp: restart 8 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 8 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 8
new FAIL: gdb.base/checkpoint-ns.exp: restart 9 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 9 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 9
new FAIL: gdb.base/checkpoint-ns.exp: restart 10 three
new FAIL: gdb.base/checkpoint-ns.exp: break2 10 one
new FAIL: gdb.base/checkpoint-ns.exp: outfile still open 10
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork two
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork three
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork four
new FAIL: gdb.base/checkpoint-ns.exp: Exit, dropped into next fork five
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints two
new FAIL: gdb.base/checkpoint-ns.exp: kill all one
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 0
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 1
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 2
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 3
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 4
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 5
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 6
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 7
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 8
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 9
new FAIL: gdb.base/checkpoint-ns.exp: no more checkpoint 10
new FAIL: gdb.base/checkpoint-ns.exp: break2 with many checkpoints
new FAIL: gdb.base/checkpoint-ns.exp: info checkpoints with at least 600 checkpoints
new FAIL: gdb.base/interrupt.exp: child died when we called func1, skipped rest of tests
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
PASS -> FAIL: gdb.base/print-symbol-loading.exp: shlib brief: load shared-lib
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func2 breakpoint here
PASS -> FAIL: gdb.cp/gdb2495.exp: info breakpoints
new FAIL: gdb.cp/gdb2495.exp:
PASS -> FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag
PASS -> FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off..
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.mi/mi-dprintf.exp: mi expect stop
new FAIL: gdb.mi/mi-dprintf.exp: mi 1st dprintf, agent
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf continue, agent
new FAIL: gdb.mi/mi-dprintf.exp: mi info dprintf second time
new FAIL: gdb.mi/mi-dprintf.exp: mi 2nd dprintf, agent
PASS -> FAIL: gdb.mi/mi-dprintf.exp: mi set dprintf style to an unrecognized type
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": set x
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": set x
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.reverse/recvmsg-reverse.exp: continue to breakpoint: marker2
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: hand call, thread 5
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 2
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 3
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 4
PASS -> FAIL: gdb.threads/hand-call-in-threads.exp: dummy stack frame number, thread 5
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
new FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/3453>

Commit(s) tested:
	f0a8d0dc70eddbf1e323e8c07f5092ff5e327548

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix double prompt output after run control MI commands with mi-async on (PR 20045)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=3fc44f69aa82880bbf8f3c0c3a299d1160380b69>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one
PASS -> FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one
PASS -> FAIL: gdb.base/display.exp: first disp
PASS -> FAIL: gdb.base/display.exp: second disp
PASS -> FAIL: gdb.base/display.exp: info disp
PASS -> FAIL: gdb.base/display.exp: next hit
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
PASS -> FAIL: gdb.base/display.exp: watch off
PASS -> FAIL: gdb.base/display.exp: finish
PASS -> FAIL: gdb.base/display.exp: step
PASS -> FAIL: gdb.base/display.exp: cont
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/value-double-free.exp: continue
PASS -> FAIL: gdb.base/value-double-free.exp: print empty
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
PASS -> FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
PASS -> FAIL: gdb.base/watchpoint.exp: continue to marker2
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
PASS -> FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
PASS -> FAIL: gdb.base/watchpoint.exp: cont
PASS -> FAIL: gdb.base/watchpoint.exp: next past local_x initialization
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch -location
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo2
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo4
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
PASS -> FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable
PASS -> FAIL: gdb.base/watch-read.exp: write watchpoint triggers
PASS -> FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
PASS -> FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5
PASS -> FAIL: gdb.cp/annota3.exp: watch triggered on a.x
PASS -> FAIL: gdb.cp/annota3.exp: annotate-quit
PASS -> FAIL: gdb.cp/gdb2495.exp: info breakpoints
new FAIL: gdb.cp/gdb2495.exp:
PASS -> FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag
PASS -> FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off..
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
PASS -> FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/3543>

Commit(s) tested:
	d03dfbf66983602a4cdb97c37edd54c420ceed40

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Bump GDB version number to 7.11.1.DATE-git.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<Error fetching commit ID for d03dfbf66983602a4cdb97c37edd54c420ceed40>

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/3542>

Commit(s) tested:
	41d82368c333de4f7ec3fd7734ee683055e8c35c

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set GDB version number to 7.11.1.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<Error fetching commit ID for 41d82368c333de4f7ec3fd7734ee683055e8c35c>

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/3386>

Commit(s) tested:
	329dec6fc5f2efa83d626583135081b53abe8729

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix gdb/python/python.c use-after-free

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=3947052a4f41c8f5668b4481e89f52f45660c20f>

*** Regressions found ***
============================
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
PASS -> FAIL: gdb.base/display.exp: first disp
PASS -> FAIL: gdb.base/display.exp: second disp
PASS -> FAIL: gdb.base/display.exp: info disp
PASS -> FAIL: gdb.base/display.exp: next hit
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
PASS -> FAIL: gdb.base/display.exp: watch off
PASS -> FAIL: gdb.base/display.exp: finish
PASS -> FAIL: gdb.base/display.exp: step
PASS -> FAIL: gdb.base/display.exp: cont
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/value-double-free.exp: continue
PASS -> FAIL: gdb.base/value-double-free.exp: print empty
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
PASS -> FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
PASS -> FAIL: gdb.base/watchpoint.exp: continue to marker2
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
PASS -> FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
PASS -> FAIL: gdb.base/watchpoint.exp: cont
PASS -> FAIL: gdb.base/watchpoint.exp: next past local_x initialization
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch -location
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo2
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo4
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
PASS -> FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable
PASS -> FAIL: gdb.base/watch-read.exp: write watchpoint triggers
PASS -> FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
PASS -> FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5
PASS -> FAIL: gdb.cp/annota3.exp: watch triggered on a.x
PASS -> FAIL: gdb.cp/annota3.exp: annotate-quit
PASS -> FAIL: gdb.cp/gdb2495.exp: info breakpoints
new FAIL: gdb.cp/gdb2495.exp:
PASS -> FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag
PASS -> FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off..
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
PASS -> FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/3277>

Commit(s) tested:
	619f36aa006c4263ec17b1d2a73613f840042c16

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Handle MIPS Linux SIGTRAP siginfo.si_code values

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=176ebc4cc2285f7d1f00e34879b4b973f92f78a1>

*** Regressions found ***
============================
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
PASS -> FAIL: gdb.base/display.exp: first disp
PASS -> FAIL: gdb.base/display.exp: second disp
PASS -> FAIL: gdb.base/display.exp: info disp
PASS -> FAIL: gdb.base/display.exp: next hit
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
PASS -> FAIL: gdb.base/display.exp: watch off
PASS -> FAIL: gdb.base/display.exp: finish
PASS -> FAIL: gdb.base/display.exp: step
PASS -> FAIL: gdb.base/display.exp: cont
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/value-double-free.exp: continue
PASS -> FAIL: gdb.base/value-double-free.exp: print empty
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
PASS -> FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
PASS -> FAIL: gdb.base/watchpoint.exp: continue to marker2
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
PASS -> FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
PASS -> FAIL: gdb.base/watchpoint.exp: cont
PASS -> FAIL: gdb.base/watchpoint.exp: next past local_x initialization
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch -location
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo2
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo4
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
PASS -> FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable
PASS -> FAIL: gdb.base/watch-read.exp: write watchpoint triggers
PASS -> FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
PASS -> FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5
PASS -> FAIL: gdb.cp/annota3.exp: watch triggered on a.x
PASS -> FAIL: gdb.cp/annota3.exp: annotate-quit
PASS -> FAIL: gdb.cp/gdb2495.exp: info breakpoints
new FAIL: gdb.cp/gdb2495.exp:
PASS -> FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag
PASS -> FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off..
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
PASS -> FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/3171>

Commit(s) tested:
	cd64cabb8c66a5565fc33bf66a07c08bc767e413

Author(s) (in the same order as the commits):
	Yichao Yu <yyc1992@gmail.com>

Subject:
	Fix PR gdb/19858: GDB doesn't register the JIT libraries on attach

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=b076788d9107439e5c6ab8e95c711361a0f9b7f7>

*** Regressions found ***
============================
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
PASS -> FAIL: gdb.base/display.exp: first disp
PASS -> FAIL: gdb.base/display.exp: second disp
PASS -> FAIL: gdb.base/display.exp: info disp
PASS -> FAIL: gdb.base/display.exp: next hit
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
PASS -> FAIL: gdb.base/display.exp: watch off
PASS -> FAIL: gdb.base/display.exp: finish
PASS -> FAIL: gdb.base/display.exp: step
PASS -> FAIL: gdb.base/display.exp: cont
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/value-double-free.exp: continue
PASS -> FAIL: gdb.base/value-double-free.exp: print empty
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
PASS -> FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
PASS -> FAIL: gdb.base/watchpoint.exp: continue to marker2
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
PASS -> FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
PASS -> FAIL: gdb.base/watchpoint.exp: cont
PASS -> FAIL: gdb.base/watchpoint.exp: next past local_x initialization
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch -location
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo2
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo4
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
PASS -> FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable
PASS -> FAIL: gdb.base/watch-read.exp: write watchpoint triggers
PASS -> FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
PASS -> FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5
PASS -> FAIL: gdb.cp/annota3.exp: watch triggered on a.x
PASS -> FAIL: gdb.cp/annota3.exp: annotate-quit
PASS -> FAIL: gdb.cp/gdb2495.exp: info breakpoints
new FAIL: gdb.cp/gdb2495.exp:
PASS -> FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag
PASS -> FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off..
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
PASS -> FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/3093>

Commit(s) tested:
	2ef34d11f61d79dcb152713aa059051d8cd3295d

Author(s) (in the same order as the commits):
	Markus Metzger <markus.t.metzger@intel.com>

Subject:
	btrace: fix PR gdb/19829

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=e79082b4617c440ebdad324ae2a6a2b5bdb7c3e2>

*** Regressions found ***
============================
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: long_func
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
PASS -> FAIL: gdb.base/display.exp: first disp
PASS -> FAIL: gdb.base/display.exp: second disp
PASS -> FAIL: gdb.base/display.exp: info disp
PASS -> FAIL: gdb.base/display.exp: next hit
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
PASS -> FAIL: gdb.base/display.exp: watch off
PASS -> FAIL: gdb.base/display.exp: finish
PASS -> FAIL: gdb.base/display.exp: step
PASS -> FAIL: gdb.base/display.exp: cont
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue
PASS -> FAIL: gdb.base/jit-so.exp: one_jit_test-1: info function jit_function
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint
PASS -> FAIL: gdb.base/value-double-free.exp: continue
PASS -> FAIL: gdb.base/value-double-free.exp: print empty
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers
PASS -> FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes
PASS -> FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
PASS -> FAIL: gdb.base/watchpoint.exp: continue to marker2
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
PASS -> FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
PASS -> FAIL: gdb.base/watchpoint.exp: cont
PASS -> FAIL: gdb.base/watchpoint.exp: next past local_x initialization
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call
PASS -> FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch -location
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo2
PASS -> FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here
PASS -> FAIL: gdb.base/watchpoint.exp: continue with watch foo4
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed
PASS -> FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable
PASS -> FAIL: gdb.base/watch-read.exp: write watchpoint triggers
PASS -> FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes
PASS -> FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes
PASS -> FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4
PASS -> FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5
PASS -> FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5
PASS -> FAIL: gdb.cp/annota3.exp: watch triggered on a.x
PASS -> FAIL: gdb.cp/annota3.exp: annotate-quit
PASS -> FAIL: gdb.cp/gdb2495.exp: info breakpoints
new FAIL: gdb.cp/gdb2495.exp:
PASS -> FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag
PASS -> FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off..
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
PASS -> FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit
PASS -> FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write
PASS -> FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-precsave.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: void_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: char_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: short_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: int_func
PASS -> FAIL: gdb.reverse/finish-reverse.exp: continue to breakpoint: long_func
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
new FAIL: gdb.threads/watchthreads2.exp: x watch loop
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data
PASS -> FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/3069>

Commit(s) tested:
	4e57eb7028442f0e771c815d755b64daf7394e68

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix PR gdb/19676: Disable displaced stepping if /proc not mounted

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=29f42b7bce0364cae40bdd3a9babcdf705f1366f>

*** Regressions found ***
============================
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
PASS -> FAIL: gdb.base/display.exp: info disp
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (GDB internal error)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/2939>

Commit(s) tested:
	63a034c19fa2a0c09aeb1ae3575daa57edf19d0c

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Bump GDB version number to 7.11.0.DATE-git.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=1996790920fa9a2ed4b1d1e861896008efc2d97f>

*** Regressions found ***
============================
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
PASS -> FAIL: gdb.base/display.exp: info disp
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (GDB internal error)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/2893>

Commit(s) tested:
	8b6bd5aca63189590498195a7a2696cde021c9cd

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	Fix more testcases with standard_output_file.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=f25b3efd9bfb9e893b9a98af96abd02e110f21d4>

*** Regressions found ***
============================
new FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step (pattern 3)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
PASS -> FAIL: gdb.base/display.exp: info disp
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
new FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step (pattern 3)
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (GDB internal error)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/2888>

Commit(s) tested:
	46e42194d8d2585b6860b1267c2b3e24ba9c589c

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite: Fix false Fortran regressions with recent gcc

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=a1cb793a2fccbb01ec162d74988a327ebd135b80>

*** Regressions found ***
============================
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 5 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
PASS -> FAIL: gdb.base/display.exp: info disp
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (GDB internal error)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/2886>

Commit(s) tested:
	307c2facb242da4fc557baea06e63d8e8a621142

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	testsuite regression: gdb.fortran/vla-value-sub.exp gdb.fortran/vla-value-sub-finish.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=e3b254c2da7e9167859b384ce580999f08a0765b>

*** Regressions found ***
============================
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 6 one (timeout)
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
PASS -> FAIL: gdb.base/display.exp: info disp
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.fortran/vla-ptype.exp: ptype pvla not initialized
new FAIL: gdb.fortran/vla-sizeof.exp: print sizeof non-associated pvla
new FAIL: gdb.fortran/vla-value.exp: print undefined pvla
new FAIL: gdb.fortran/vla-value.exp: print non-associated &pvla
new FAIL: gdb.fortran/vla-value.exp: print undefined pvla(1,3,8)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (GDB internal error)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/2861>

Commit(s) tested:
	83d9e733abe9cc0553f899064a955a6255550ade

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Clear *VAL in regcache_raw_read_unsigned

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=605860cb2d3cb2c498b6502eab30e4d5fbddfa87>

*** Regressions found ***
============================
new FAIL: gdb.base/coredump-filter.exp: saving corefile for non-Private-Anonymous: save corefile (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
new FAIL: gdb.base/coredump-filter.exp: saving corefile for non-Private-Anonymous: save corefile (timeout)
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
PASS -> FAIL: gdb.base/display.exp: info disp
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.fortran/vla-ptype.exp: ptype pvla not initialized
new FAIL: gdb.fortran/vla-sizeof.exp: print sizeof non-associated pvla
new FAIL: gdb.fortran/vla-value.exp: print undefined pvla
new FAIL: gdb.fortran/vla-value.exp: print non-associated &pvla
new FAIL: gdb.fortran/vla-value.exp: print undefined pvla(1,3,8)
PASS -> FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was filled (passed fixed array)
PASS -> FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was mofified in debugger (passed fixed array)
PASS -> FAIL: gdb.fortran/vla-value-sub-finish.exp: print array2 in foo after it was filled
PASS -> FAIL: gdb.fortran/vla-value-sub-finish.exp: print array2 in foo after it was mofified in debugger
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (GDB internal error)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/2851>

Commit(s) tested:
	8e1043a37a176f07f0e06d29fe2f54752c8976e5

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set GDB version number to 7.10.90.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=4911419a84c4b0a05914a5d9cee64368d75c5e0c>

*** Regressions found ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
PASS -> FAIL: gdb.base/display.exp: info disp
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.fortran/vla-ptype.exp: ptype pvla not initialized
new FAIL: gdb.fortran/vla-sizeof.exp: print sizeof non-associated pvla
new FAIL: gdb.fortran/vla-value.exp: print undefined pvla
new FAIL: gdb.fortran/vla-value.exp: print non-associated &pvla
new FAIL: gdb.fortran/vla-value.exp: print undefined pvla(1,3,8)
PASS -> FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was filled (passed fixed array)
PASS -> FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was mofified in debugger (passed fixed array)
PASS -> FAIL: gdb.fortran/vla-value-sub-finish.exp: print array2 in foo after it was filled
PASS -> FAIL: gdb.fortran/vla-value-sub-finish.exp: print array2 in foo after it was mofified in debugger
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 1
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 1: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3 (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off (timeout)
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints (timeout)
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (GDB internal error)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================

Failures on Fedora-ppc64le-cc-with-index, branch gdb-7.11-branch

[sergiodj+buildbot]

Buildslave:
	fedora-ppc64le-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-ppc64le-cc-with-index/builds/2847>

Commit(s) tested:
	4ad0fc283ce48b60624007f81134704b6837152c

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set development mode to "off" by default.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/cgit/Fedora-ppc64le-cc-with-index/.git/tree/?h=gdb-7.11-branch&id=2849e0ee9877bf36ae1645e999ea61f0b27a0bac>

*** Regressions found ***
============================
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
============================


*** Regressions against the baseline ***
============================
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +4: .long 0x7c642ed8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +12: .long 0x7d642ed9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +20: .long 0x7c642fd8
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +28: .long 0x7d642fd9
PASS -> FAIL: gdb.arch/powerpc-power.exp: Found +548: waitasec
new FAIL: gdb.base/checkpoint-ns.exp: breakpoint 1 7 one (timeout)
PASS -> FAIL: gdb.base/display.exp: first disp
new FAIL: gdb.base/display.exp: second disp (the program exited)
PASS -> FAIL: gdb.base/display.exp: info disp
new FAIL: gdb.base/display.exp: next hit (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: disp *p_i
PASS -> FAIL: gdb.base/display.exp: p p_i = 0x0
PASS -> FAIL: gdb.base/display.exp: display bad address
PASS -> FAIL: gdb.base/display.exp: p p_i = &i
PASS -> FAIL: gdb.base/display.exp: display good address
new FAIL: gdb.base/display.exp: watch off (the program is no longer running)
new FAIL: gdb.base/display.exp: finish (the program is no longer running)
new FAIL: gdb.base/display.exp: step (the program is no longer running)
new FAIL: gdb.base/display.exp: cont (the program is no longer running)
PASS -> FAIL: gdb.base/display.exp: printf "%d%d",i
PASS -> FAIL: gdb.base/display.exp: print/k j
PASS -> FAIL: gdb.base/display.exp: debug test output 1
PASS -> FAIL: gdb.base/display.exp: debug test output 1a
PASS -> FAIL: gdb.base/display.exp: debug test output 2
PASS -> FAIL: gdb.base/display.exp: debug test output 2a
PASS -> FAIL: gdb.base/display.exp: debug test output 3
PASS -> FAIL: gdb.base/display.exp: x/0 j
PASS -> FAIL: gdb.base/display.exp: ignored s
PASS -> FAIL: gdb.base/display.exp: print/a $pc
PASS -> FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at next
new FAIL: gdb.base/gdb11531.exp: watchpoint variable triggers at continue (the program exited)
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit
PASS -> FAIL: gdb.base/pr11022.exp: watchpoint hit 2
PASS -> FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 9)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 8)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 7)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 6)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 5)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, first time
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 4)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 3)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 2)
PASS -> FAIL: gdb.base/recurse.exp: continue to recurse (a = 1)
PASS -> FAIL: gdb.base/recurse.exp: continue to second instance watchpoint, second time
PASS -> FAIL: gdb.base/recurse.exp: second instance watchpoint deleted when leaving scope
new FAIL: gdb.base/recurse.exp: continue to first instance watchpoint, second time (the program exited)
new FAIL: gdb.base/recurse.exp: first instance watchpoint deleted when leaving scope (the program is no longer running)
PASS -> FAIL: gdb.base/stap-probe.exp: without semaphore, optimized: set multi-location probe breakpoint (probe two)
PASS -> FAIL: gdb.base/stap-probe.exp: with semaphore, optimized: set multi-location probe breakpoint (probe two)
new FAIL: gdb.base/value-double-free.exp: continue (the program exited)
PASS -> FAIL: gdb.base/value-double-free.exp: print empty()
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 0->1: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression before
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: continue
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 0->5: print expression after
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.a: 1->0: continue (the program exited)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression before
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: continue (the program is no longer running)
PASS -> FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: q.e: 5->4: print expression after
new FAIL: gdb.base/watch-bitfields.exp: -location watch against bitfields: continue until exit (the program is no longer running)
new FAIL: gdb.base/watch-cond.exp: watchpoint with global expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint with local expression, local condition evaluates in correct frame (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint on global2 variable triggers (timeout)
new FAIL: gdb.base/watch-cond.exp: condition of watchpoint 2 changes (timeout)
new FAIL: gdb.base/watch-cond.exp: watchpoint stops with untestable local expression (timeout)
PASS -> FAIL: gdb.base/watch-cond-infcall.exp: hw: continue
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 1
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 2
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, third time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoint.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: Watchpoint hit count is 5
new FAIL: gdb.base/watchpoint.exp: continue to marker2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_simple_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, first time
new FAIL: gdb.base/watchpoint.exp: watchpoint hit in test_disabling_watchpoints, second time (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint disabled in table
new FAIL: gdb.base/watchpoint.exp: disabled watchpoint skipped (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_disabling_watchpoints (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: trigger local watch
PASS -> FAIL: gdb.base/watchpoint.exp: self-delete local watch
PASS -> FAIL: gdb.base/watchpoint.exp: set static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: trigger static local watch
PASS -> FAIL: gdb.base/watchpoint.exp: static local watch did not self-delete
new FAIL: gdb.base/watchpoint.exp: cont (the program exited)
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call
new FAIL: gdb.base/watchpoint.exp: trigger local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: cont (the program is no longer running) <<2>>
new FAIL: gdb.base/watchpoint.exp: next past local_x initialization (the program is no longer running) <<2>>
PASS -> FAIL: gdb.base/watchpoint.exp: set local watch in recursive call with explicit scope
new FAIL: gdb.base/watchpoint.exp: trigger local watch with explicit scope in recursive call (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: self-delete local watch with explicit scope in recursive call (2) (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue until exit at continue to exit in test_complex_watchpoint (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: next after watch x
new FAIL: gdb.base/watchpoint.exp: watchpoint on buf hit (the program exited)
PASS -> FAIL: gdb.base/watchpoint.exp: watch $pc
PASS -> FAIL: gdb.base/watchpoint.exp: disable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: reenable watchpoint `$pc'
PASS -> FAIL: gdb.base/watchpoint.exp: watchpoint `$pc' is enabled
PASS -> FAIL: gdb.base/watchpoint.exp: delete watchpoint `$pc'
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func5 breakpoint here (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: watch -location .x
new FAIL: gdb.base/watchpoint.exp: continue with watch -location (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func6 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo2 (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue to breakpoint: func7 breakpoint here (the program is no longer running)
new FAIL: gdb.base/watchpoint.exp: continue with watch foo4 (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint.exp: rwatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint.exp: awatch disallowed for register based expression
PASS -> FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue
new FAIL: gdb.base/watchpoint-hw-hit-once.exp: continue to break-at-exit (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, first time <<2>>
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 1
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint hit, second time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 2
PASS -> FAIL: gdb.base/watchpoints.exp: watchpoint ival1 hit, third time
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint ival1 hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, third time (the program exited)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 3
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fourth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoints.exp: Watchpoint hit count is 4
new FAIL: gdb.base/watchpoints.exp: watchpoint hit, fifth time (the program is no longer running)
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit
PASS -> FAIL: gdb.base/watchpoint-solib.exp: continue to watchpoint hit again
new FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: hardware watchpoint triggers (the program exited)
PASS -> FAIL: gdb.base/watchpoint-stops-at-right-insn.exp: always-inserted off: get hw watchpoint PC
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on first read (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers on read after value changed (timeout)
new FAIL: gdb.base/watch-read.exp: set write watchpoint on global variable (timeout)
new FAIL: gdb.base/watch-read.exp: write watchpoint triggers (timeout)
new FAIL: gdb.base/watch-read.exp: only write watchpoint triggers when value changes (timeout)
new FAIL: gdb.base/watch-read.exp: read watchpoint triggers when value doesn't change, trapping reads and writes (timeout)
new FAIL: gdb.base/watch-read.exp: only read watchpoint triggers when value doesn't change (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 1 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 2 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 3 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 4 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Watchpoint triggered iteration 5 (timeout)
new FAIL: gdb.base/watch_thread_num.exp: Check thread that triggered iteration 5 (timeout)
new FAIL: gdb.base/watch-vfork.exp: Watchpoint triggers after vfork (hw) (the program exited)
new FAIL: gdb.cp/annota3.exp: watch triggered on a.x (timeout)
new FAIL: gdb.cp/annota3.exp: annotate-quit (pattern 1)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception without a handler. (timeout)
new FAIL: gdb.cp/gdb2495.exp: bt after returning from a popped frame (timeout)
new FAIL: gdb.cp/gdb2495.exp: info breakpoints (timeout)
new FAIL: gdb.cp/gdb2495.exp: (timeout) set unwind-on-terminating-exception off
new FAIL: gdb.cp/gdb2495.exp: Turn off unwind on terminating exception flag (timeout)
new FAIL: gdb.cp/gdb2495.exp: Call a function that raises an exception with unwinding off.. (timeout)
new FAIL: gdb.cp/gdb2495.exp: delete all breakpoints in delete_breakpoints (timeout)
new FAIL: gdb.cp/vla-cxx.exp: continue to breakpoint: vlas_filled (the program exited)
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vla
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref
PASS -> FAIL: gdb.cp/vla-cxx.exp: print vlaref2
PASS -> FAIL: gdb.cp/vla-cxx.exp: print c
new FAIL: gdb.dwarf2/bad-regnum.exp: info addr foo1
new FAIL: gdb.fortran/vla-ptype.exp: ptype pvla not initialized
new FAIL: gdb.fortran/vla-sizeof.exp: print sizeof non-associated pvla
new FAIL: gdb.fortran/vla-value.exp: print undefined pvla
new FAIL: gdb.fortran/vla-value.exp: print non-associated &pvla
new FAIL: gdb.fortran/vla-value.exp: print undefined pvla(1,3,8)
PASS -> FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was filled (passed fixed array)
PASS -> FAIL: gdb.fortran/vla-value-sub.exp: print array2 in foo after it was mofified in debugger (passed fixed array)
PASS -> FAIL: gdb.fortran/vla-value-sub-finish.exp: print array2 in foo after it was filled
PASS -> FAIL: gdb.fortran/vla-value-sub-finish.exp: print array2 in foo after it was mofified in debugger
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running)
new FAIL: gdb.mi/mi-watch.exp: hw: watchpoint trigger (unknown output after running) <<2>>
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory-bytes &x "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit (unknown output after running)
new FAIL: gdb.mi/pr11022.exp: data-write-memory &x x 4 "01": watchpoint hit 2 (unknown output after running)
new FAIL: gdb.python/py-breakpoint.exp: test_watchpoints: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_internal: Test watchpoint write (the program exited)
new FAIL: gdb.python/py-breakpoint.exp: test_bkpt_eval_funcs: Test watchpoint write (the program exited)
PASS -> FAIL: gdb.reverse/fstatat-reverse.exp: check fstatat record
PASS -> FAIL: gdb.server/non-existing-program.exp: gdbserver exits cleanly
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: no thread-specific bp: continue: continue
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: step: step
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: next: next
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: find addresses: continue to watchpoint
PASS -> FAIL: gdb.threads/step-over-trips-on-watchpoint.exp: displaced=off: with thread-specific bp: continue: continue
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoints work (GDB internal error)
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the first fork
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: breakpoint after the second fork (the program exited)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: watchpoint after the second fork (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: parent: singlethreaded: finish (the program is no longer running)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoints work (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the first fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: breakpoint after the second fork (GDB internal error)
new FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish (GDB internal error)
new FAIL: gdb.threads/watchthreads2.exp: x watch loop (the program exited)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 1 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 2 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 3 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 4 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 5 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 6 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 7 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 8 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 9 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 10 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 11 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 12 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 13 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 14 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 15 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 16 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 17 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 18 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 19 out of 20 on watched_data (timeout)
new FAIL: gdb.threads/wp-replication.exp: Continue to watchpoint trigger 20 out of 20 on watched_data (timeout)
============================