[binutils-gdb/gdb-8.0-branch] Read stop_pc after updating the gdbarch when exec'ing

[binutils-gdb/gdb-8.0-branch] Read stop_pc after updating the gdbarch when exec'ing

[sergiodj+buildbot]

*** TEST RESULTS FOR COMMIT 61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce ***

Author: Simon Marchi <simon.marchi@ericsson.com>
Branch: gdb-8.0-branch
Commit: 61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Read stop_pc after updating the gdbarch when exec'ing

When an inferior execs and changes architecture (e.g. 64 bits to 32
bits), the gdbarch associated to the inferior is updated by the
follow_exec call in handle_inferior_event_1.  We should avoid doing any
register read before that point, because the registers sent by the
remote side will be those of the new architecture, but we would
interpret them using the old architecture.  We do just that by setting
stop_pc during this window, which obviously requires reading the
registers.  This results in gdb.multi/multi-arch-exec.exp failing, GDB
outputting the following error:

  Truncated register 50 in remote 'g' packet

This patch fixes that by postponing the setting of stop_pc to after
we've updated the inferior gdbarch.

This bug was hiding another problem, and as such introduces some
failures in gdb.base/foll-exec-mode.exp.  The following patch takes care
of that.

gdb/ChangeLog:

	* infrun.c (handle_inferior_event_1): When exec'ing, read
	stop_pc after follow_exec.

Failures on Ubuntu-AArch64-native-gdbserver-m64, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-aarch64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch64-native-gdbserver-m64/builds/2721>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch64-native-gdbserver-m64/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch64-m64, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-aarch64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch64-m64/builds/2730>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch64-m64/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-s390x-m64, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	marist-fedora-s390x

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/6148>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-s390x-m64/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1340>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from main thread
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-i686, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/7088>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-i686/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 2
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/7059>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m32/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: next past exec
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: Check inferior list
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: use correct executable
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: next past exec
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: Check inferior list
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: switch inferiors
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: use correct executable
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: continue past exec
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: Check inferior list
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: use correct executable
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: continue past exec
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: Check inferior list
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: switch inferiors
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: use correct executable
new FAIL: gdb.go/methods.exp: setting breakpoint at main.T.Foo
new FAIL: gdb.go/methods.exp: setting breakpoint at
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: next: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: continue to breakpoint: run to breakpoint in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: setup: unbreak loop in thread 3
PASS -> FAIL: gdb.threads/multiple-step-overs.exp: displaced=on: continue: continue
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
new FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: ctf: info locals
new FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: ctf: print locc
new FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: ctf: print locf
new FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: ctf: print locd
new FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: ctf: info locals
new FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: ctf: info locals
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m32/builds/7070>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-m32/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/interrupt.exp: continue
new FAIL: gdb.go/methods.exp: setting breakpoint at main.T.Foo
new FAIL: gdb.go/methods.exp: setting breakpoint at
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-m32/builds/1350>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-m32/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-extended-gdbserver-m64, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m64/builds/7087>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m64/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: next past exec
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: Check inferior list
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,no_infswitch: use correct executable
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: next past exec
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: Check inferior list
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: switch inferiors
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,next,infswitch: use correct executable
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: continue past exec
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: Check inferior list
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,no_infswitch: use correct executable
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: continue past exec
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: Check inferior list
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: switch inferiors
PASS -> FAIL: gdb.base/foll-exec-mode.exp: new,continue,infswitch: use correct executable
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 4: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 7: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 9: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 11: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 13: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 14: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 15: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 16: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 17: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 19: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 23: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 28: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 30: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 31: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 32: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 34: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 35: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 37: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 49: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 50: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 53: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 54: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 65: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 67: thread apply 2 print $_siginfo.si_signo
new FAIL: gdb.threads/attach-into-signal.exp: threaded: attempt 97: thread apply 2 print $_siginfo.si_signo
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-gdbserver-m64, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/7052>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-gdbserver-m64/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
new FAIL: gdb.go/methods.exp: setting breakpoint at main.T.Foo
new FAIL: gdb.go/methods.exp: setting breakpoint at
new FAIL: gdb.rust/modules.exp: call f3
new FAIL: gdb.rust/modules.exp: call self::f2
new FAIL: gdb.rust/modules.exp: call self::super::f2
new FAIL: gdb.rust/modules.exp: call super::f2
new FAIL: gdb.rust/modules.exp: call self::super::super::f2
new FAIL: gdb.rust/modules.exp: call super::super::f2
new FAIL: gdb.rust/modules.exp: call ::f2
new FAIL: gdb.rust/modules.exp: call extern modules::mod1::f2
new FAIL: gdb.rust/simple.exp: print
new FAIL: gdb.rust/simple.exp: print box_some
new FAIL: gdb.rust/simple.exp: print box_none
new FAIL: gdb.rust/simple.exp: print parametrized
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
new FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: ctf: info locals
new FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: ctf: print locf
new FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: ctf: print locd
new FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: ctf: info locals
new FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: ctf: info locals
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-extended-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-extended-gdbserver-m32/builds/1350>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-extended-gdbserver-m32/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: run to mi-var-rtti.cc:306
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-cc-with-index, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/7027>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-cc-with-index/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: attach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 3: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 4: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 5: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 6: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 7: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 8: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: reset timer in the inferior
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: print seconds_left
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: detach
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 9: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: no new threads
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted on
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break break_fn
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 1
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 2
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: break at break_fn: 3
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: kill process
PASS -> FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: set breakpoint always-inserted off
new FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 10: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: killed outside: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-m64, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m64/builds/7109>

Commit(s) tested:
	61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Read stop_pc after updating the gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-m64/61/61bffb81d5ffdb7c6005b7b7fb6cfd8e9e6b19ce/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/3525>

Commit(s) tested:
	378272cef651024de67dc0e09d3f41ae2d66f8bd

Author(s) (in the same order as the commits):
	Tamar Christina <tamar.christina@arm.com>

Subject:
	Fix AArch64 debug trace build

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/37/378272cef651024de67dc0e09d3f41ae2d66f8bd/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
new UNRESOLVED: gdb.mi/mi-var-child-f.exp: create local variable array
new UNRESOLVED: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 23
new UNRESOLVED: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 24
new UNRESOLVED: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 27
new UNRESOLVED: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 30
new UNRESOLVED: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 31
new UNRESOLVED: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 36
new UNRESOLVED: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 37
new UNRESOLVED: gdb.mi/mi-vla-fortran.exp: run to breakpoint at line 42
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from thread 2
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/2631>

Commit(s) tested:
	621a88c13ad39cccc8ba511ff3088cd623e9f335

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix GCC PR83906 - [8 Regression] Random FAIL: libstdc++-prettyprinters/80276.cc whatis p4

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/62/621a88c13ad39cccc8ba511ff3088cd623e9f335/>

*** Diff to previous build ***
============================
new KFAIL: gdb.base/step-over-syscall.exp: clone: displaced=on: single step over clone
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from thread 1
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/2544>

Commit(s) tested:
	92533dc55ed6aee88da718487f075692074b00dd

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix scm-ports.exp regression

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/92/92533dc55ed6aee88da718487f075692074b00dd/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from main thread
new FAIL: gdb.threads/queue-signal.exp: determine thread functions
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/2450>

Commit(s) tested:
	bd496067387a9c89a7e62bbba76e784634936932

Author(s) (in the same order as the commits):
	Richard Henderson <rth@redhat.com>

Subject:
	Fix PR19061, gdb hangs/spins-on-cpu when debugging any program on Alpha

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/bd/bd496067387a9c89a7e62bbba76e784634936932/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1901>

Commit(s) tested:
	06848393c68c1b370cf2441756ed7413f4442515

Author(s) (in the same order as the commits):
	Leszek Swirski <leszeks@google.com>

Subject:
	Fix dwarf2_string_attr for -gsplit-dwarf

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/06/06848393c68c1b370cf2441756ed7413f4442515/>

*** Diff to previous build ***
============================
new KFAIL: gdb.base/step-over-syscall.exp: clone: displaced=on: single step over clone
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: listed args
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: step to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: step does not change thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: current thread advanced - unlocked
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: continue to breakpoint: return to loop
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: listed args
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: other threads ran - unlocked
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: continue to breakpoint: return to loop
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: print call_function = 1
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: listed args
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: other threads ran - unlocked
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: continue to breakpoint: return to loop
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: listed args
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: continue to breakpoint: return to loop
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: listed args
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: continue to breakpoint: return to loop
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: print call_function = 1
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: listed args
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: continue to breakpoint: return to loop
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: listed args
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: continue to breakpoint: return to loop
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: listed args
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: set scheduler-locking off
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: continue to breakpoint: return to loop
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: delete all breakpoints in delete_breakpoints
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: print call_function = 1
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: listed args
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: find current thread
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1808>

Commit(s) tested:
	f24b864960e61f9a91f8c168c1afe12a6676ad7a

Author(s) (in the same order as the commits):
	Walfred Tedeschi <walfred.tedeschi@intel.com>

Subject:
	PR22137: gdbserver crashes on host with pkru register.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/f2/f24b864960e61f9a91f8c168c1afe12a6676ad7a/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: run to mi-var-rtti.cc:148
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1366>

Commit(s) tested:
	14c2ca3638ce928546f1aaf9eda752bcdae78d99

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Bump GDB version number to 8.0.1.DATE-git.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/14/14c2ca3638ce928546f1aaf9eda752bcdae78d99/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1365>

Commit(s) tested:
	2dcf9205c32aa69c102640962ff03746d04c02cc

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set GDB version number to 8.0.1.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/2d/2dcf9205c32aa69c102640962ff03746d04c02cc/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1342>

Commit(s) tested:
	e8311673316b29c557dcc18a09e252de724dc910

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Test different follow-exec-mode settings in gdb.multi/multi-arch-exec.exp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/e8/e8311673316b29c557dcc18a09e252de724dc910/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from thread 1
new FAIL: gdb.threads/queue-signal.exp: determine thread functions
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1341>

Commit(s) tested:
	42f0d8218d9865d076a13a1a30e317232eae0721

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Add thread after updating gdbarch when exec'ing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/42/42f0d8218d9865d076a13a1a30e317232eae0721/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1339>

Commit(s) tested:
	e72d662aba1bc92e141688ebb27f3948ec5d2997

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Improve "'g' reply is is to long" error message

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/e7/e72d662aba1bc92e141688ebb27f3948ec5d2997/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1236>

Commit(s) tested:
	c247e38d78a98f85066e4a61032ee742d08a0579

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	PR gdb/22046: Fix T-stopped detach regression on old Linux kernels

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/c2/c247e38d78a98f85066e4a61032ee742d08a0579/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1207>

Commit(s) tested:
	95eeca3bccb6121c201183e21cb5fc39a6b711a2

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	define_command: Don't convert command name to lower case

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/95/95eeca3bccb6121c201183e21cb5fc39a6b711a2/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: run to mi-var-rtti.cc:201
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1134>

Commit(s) tested:
	b3e687f4c5e2bd847ea0608fd8960820f3efbda3

Author(s) (in the same order as the commits):
	Maciej W. Rozycki <macro@imgtec.com>

Subject:
	PR breakpoints/21886: mem-break: Fix breakpoint insertion location

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/b3/b3e687f4c5e2bd847ea0608fd8960820f3efbda3/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1045>

Commit(s) tested:
	cd33a03d183a268b83ccbcae07f3788308e8d9f4

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Catch exceptions thrown from gdbarch_skip_prologue

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/cd/cd33a03d183a268b83ccbcae07f3788308e8d9f4/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: step does not change thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: current thread advanced - unlocked
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: continue to breakpoint: return to loop
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: other threads ran - unlocked
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: set scheduler-locking off
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: continue to breakpoint: return to loop
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: print call_function = 1
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: other threads ran - unlocked
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: set scheduler-locking off
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: continue to breakpoint: return to loop
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: step to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: set scheduler-locking off
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: continue to breakpoint: return to loop
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: set scheduler-locking off
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: continue to breakpoint: return to loop
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: set scheduler-locking step
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: print call_function = 1
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: set scheduler-locking off
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: continue to breakpoint: return to loop
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: step to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: set scheduler-locking off
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: continue to breakpoint: return to loop
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: print call_function = 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: next to increment
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: set scheduler-locking off
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: continue to breakpoint: return to loop
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: find current thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: set scheduler-locking on
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: print call_function = 1
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: next to increment
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/1043>

Commit(s) tested:
	50e64da58e648ff8708935add5b2a87b4e590edf

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[ARM] Access FPSCR on vfpv2

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/50/50e64da58e648ff8708935add5b2a87b4e590edf/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: run to mi-var-rtti.cc:306
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/705>

Commit(s) tested:
	ec8457a3b04f48c6f7750044f1145b002eebb281

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Bump GDB version number to 8.0.0.DATE-git.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/ec/ec8457a3b04f48c6f7750044f1145b002eebb281/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/queue-signal.exp: determine thread functions
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/704>

Commit(s) tested:
	1f1c02597cc199227226251a2ea51fe5f44b4d6d

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set GDB version number to 8.0.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/1f/1f1c02597cc199227226251a2ea51fe5f44b4d6d/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: run to mi-var-rtti.cc:93
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/689>

Commit(s) tested:
	ce3dd59c3d6e677bb6bbed432205d3a75476f548

Author(s) (in the same order as the commits):
	Eli Zaretskii <eliz@gnu.org>

Subject:
	Avoid compilation warning on MinGW in xstrndup

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/ce/ce3dd59c3d6e677bb6bbed432205d3a75476f548/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from thread 1
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/688>

Commit(s) tested:
	704f06fe081d9b17eb192c0db91d8367edcd6c9e

Author(s) (in the same order as the commits):
	Eli Zaretskii <eliz@gnu.org>

Subject:
	Make libiberty/waitpid.c compile without warnings on MinGW

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/70/704f06fe081d9b17eb192c0db91d8367edcd6c9e/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from main thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: step does not change thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: current thread advanced - unlocked
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: other threads ran - unlocked
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: other threads ran - unlocked
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/687>

Commit(s) tested:
	1e4004c976aaf2b9881f6044cefdb0941e38ddb9

Author(s) (in the same order as the commits):
	Eli Zaretskii <eliz@gnu.org>

Subject:
	Fix MinGW compilation warnings due to environ.h

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/1e/1e4004c976aaf2b9881f6044cefdb0941e38ddb9/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/665>

Commit(s) tested:
	d65c730fcebc853250aee5e33693c9e13e9b26ed

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Fix NEWS formatting in GDB 8.0 section

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/d6/d65c730fcebc853250aee5e33693c9e13e9b26ed/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/655>

Commit(s) tested:
	fefc936892e3a1058a7b89fe5bb58366bf78fe74

Author(s) (in the same order as the commits):
	Eli Zaretskii <eliz@gnu.org>

Subject:
	Fix compilation errors with mingw.org's MinGW runtime 3.X

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/fe/fefc936892e3a1058a7b89fe5bb58366bf78fe74/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/queue-signal.exp: determine thread functions
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/625>

Commit(s) tested:
	814385bb257fec68e0e64d43f2ccc40e219342e7

Author(s) (in the same order as the commits):
	Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>

Subject:
	Fix tui compilation with Solaris libcurses: clear define (PR tui/21482)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/81/814385bb257fec68e0e64d43f2ccc40e219342e7/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from thread 1
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/623>

Commit(s) tested:
	a1cc26f6c36117f7abbd1e7d347030c37ebb30b6

Author(s) (in the same order as the commits):
	Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>

Subject:
	Fix tui compilation with Solaris libcurses: non-const last arg to mvwaddstr (PR tui/21482)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/a1/a1cc26f6c36117f7abbd1e7d347030c37ebb30b6/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from main thread
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/619>

Commit(s) tested:
	958d57d02d936913a4f9d54810ee0fceb763aa35

Author(s) (in the same order as the commits):
	Eli Zaretskii <eliz@gnu.org>

Subject:
	Avoid MinGW compilation warning in readline/input.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/95/958d57d02d936913a4f9d54810ee0fceb763aa35/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from thread 1
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/618>

Commit(s) tested:
	db9a60402429d9bed9b531f7d1584860babe2c22

Author(s) (in the same order as the commits):
	Eli Zaretskii <eliz@gnu.org>

Subject:
	Avoid compiler warning in MinGW build

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/db/db9a60402429d9bed9b531f7d1584860babe2c22/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from main thread
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/616>

Commit(s) tested:
	f864c7e8536b0e3e860e99cd6b9188b0fbbd7912

Author(s) (in the same order as the commits):
	Thomas Preud'homme <thomas.preudhomme@arm.com>

Subject:
	Expect prompt after no FPU warning

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/f8/f864c7e8536b0e3e860e99cd6b9188b0fbbd7912/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/608>

Commit(s) tested:
	efaba6bc8fa1cb074bcaa16f48766164ccaa1005

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Add alias command to cmd_list_element

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/ef/efaba6bc8fa1cb074bcaa16f48766164ccaa1005/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/604>

Commit(s) tested:
	69e9e8a0d5ae31e9869658771a7d399a53ac7833

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Avoid exponential behavior in rust_evaluate_subexp

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/69/69e9e8a0d5ae31e9869658771a7d399a53ac7833/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/603>

Commit(s) tested:
	b6486c1f82fab968ee119b0fbcfadfdbd0dad745

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix rust_dump_subexp_body

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/b6/b6486c1f82fab968ee119b0fbcfadfdbd0dad745/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/602>

Commit(s) tested:
	d05228c1bb3b8f8b9e187c4b76d0c71a72ba15e8

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Replace "return" with "break"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/d0/d05228c1bb3b8f8b9e187c4b76d0c71a72ba15e8/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from thread 1
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/596>

Commit(s) tested:
	81aeac9bbd02fc80048e51a1bb67484eb58852dc

Author(s) (in the same order as the commits):
	Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>

Subject:
	Fix gdb 8.0 procfs.c compilation on Solaris

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/81/81aeac9bbd02fc80048e51a1bb67484eb58852dc/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from main thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: step does not change thread
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=step: current thread advanced - unlocked
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: other threads ran - unlocked
new FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=1: other threads ran - unlocked
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=step: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=step: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=0: setting breakpoint at 80 if arg != 0
new FAIL: gdb.threads/schedlock.exp: schedlock=on: cmd=next: call_function=1: setting breakpoint at 80 if arg != 0
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/564>

Commit(s) tested:
	65ea01b5924c8ed220368def5dde3151d071d6df

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Bump GDB version number to 7.99.91.DATE-git.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/65/65ea01b5924c8ed220368def5dde3151d071d6df/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/563>

Commit(s) tested:
	893df71e62f1ec3b3f2799a919db936e60adf820

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set GDB version number to 7.99.91.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/89/893df71e62f1ec3b3f2799a919db936e60adf820/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/562>

Commit(s) tested:
	6261be561546d93adb47bbd354e290896444b149

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	gdb/NEWS: rewrite "since GDB 7.12" into "in GDB 8.0"

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/62/6261be561546d93adb47bbd354e290896444b149/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/560>

Commit(s) tested:
	1332b4fa37e2b688533ef3eb86a7b1aaced90465

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix gdb.python/py-record-btrace-threads.exp with Python 3

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/13/1332b4fa37e2b688533ef3eb86a7b1aaced90465/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/554>

Commit(s) tested:
	ac7d85722af3e8a4db69940b77b82ca173ba3877

Author(s) (in the same order as the commits):
	Tim Wiederhake <tim.wiederhake@intel.com>

Subject:
	Python: Introduce gdb.Instruction class

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/ac/ac7d85722af3e8a4db69940b77b82ca173ba3877/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/553>

Commit(s) tested:
	5b2f026c0dca5e25c98f2a8288365386ec5bdffc

Author(s) (in the same order as the commits):
	Tim Wiederhake <tim.wiederhake@intel.com>

Subject:
	Python: Move and rename gdb.BtraceFunction

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/5b/5b2f026c0dca5e25c98f2a8288365386ec5bdffc/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/552>

Commit(s) tested:
	d76700e0a47cb2406da25c80f9c76c4c50424adc

Author(s) (in the same order as the commits):
	Tim Wiederhake <tim.wiederhake@intel.com>

Subject:
	Python: Move and rename gdb.BtraceInstruction

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/d7/d76700e0a47cb2406da25c80f9c76c4c50424adc/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/551>

Commit(s) tested:
	7dce57d1b5d8b26efd658069c7047eba57733eb4

Author(s) (in the same order as the commits):
	Tim Wiederhake <tim.wiederhake@intel.com>

Subject:
	Python: Introduce gdb.RecordGap class

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/7d/7dce57d1b5d8b26efd658069c7047eba57733eb4/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/550>

Commit(s) tested:
	26597c93accd6121c7aba550dfc6b1f78dfbfe6f

Author(s) (in the same order as the commits):
	Tim Wiederhake <tim.wiederhake@intel.com>

Subject:
	Python: Remove ptid from gdb.Record interface

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/26/26597c93accd6121c7aba550dfc6b1f78dfbfe6f/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
PASS -> FAIL: gdb.threads/pthreads.exp: check backtrace from thread 1
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/549>

Commit(s) tested:
	ee53a929a4c74456661f60741ec22139e06ebc70

Author(s) (in the same order as the commits):
	Tim Wiederhake <tim.wiederhake@intel.com>

Subject:
	Python: Use correct ptid in btrace recording

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/ee/ee53a929a4c74456661f60741ec22139e06ebc70/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=0: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/548>

Commit(s) tested:
	d4c682630c6ff6c8e159b833e7a8f2915853369a

Author(s) (in the same order as the commits):
	Tim Wiederhake <tim.wiederhake@intel.com>

Subject:
	Python: Fix indentation in py-record-btrace.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/d4/d4c682630c6ff6c8e159b833e7a8f2915853369a/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
new FAIL: gdb.threads/queue-signal.exp: determine thread functions
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/545>

Commit(s) tested:
	c2449d01b73b19acaf5add85b64c584fca9da366

Author(s) (in the same order as the commits):
	Keith Seitz <keiths@redhat.com>

Subject:
	Make sure malloc is linked into gdb.cp/oranking.cc.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/c2/c2449d01b73b19acaf5add85b64c584fca9da366/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/503>

Commit(s) tested:
	d41089194ff10dc538fce0bcd4c30fc4d94935d3

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Use ptid method lwp in mips_linux_new_thread

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/d4/d41089194ff10dc538fce0bcd4c30fc4d94935d3/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/501>

Commit(s) tested:
	c6767e625c0fb73c9a12d991140670a00ad8284c

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	[MIPS] Use lwpid from lwp_info instead of inferior_ptid

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/c6/c6767e625c0fb73c9a12d991140670a00ad8284c/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/longjmp.exp: next over patt3
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/498>

Commit(s) tested:
	16de50a5e2c368fa8e1213697a15ed5b5bea574f

Author(s) (in the same order as the commits):
	Keith Seitz <keiths@redhat.com>

Subject:
	Fix overload resolution involving rvalue references and cv qualifiers.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/16/16de50a5e2c368fa8e1213697a15ed5b5bea574f/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/496>

Commit(s) tested:
	9b81aa9a8b1f488939b65ce59b6ba71477c4b8d4

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Add missing incref when creating Inferior Python object

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/9b/9b81aa9a8b1f488939b65ce59b6ba71477c4b8d4/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/473>

Commit(s) tested:
	f7cc213124f45b589c7b4bd9420252dc126282d9

Author(s) (in the same order as the commits):
	Yao Qi <yao.qi@linaro.org>

Subject:
	Change gdbarch_wchar_bit for AArch64 and ARM

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/f7/f7cc213124f45b589c7b4bd9420252dc126282d9/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/443>

Commit(s) tested:
	b2e445cf19788caa3640e8cfacab82995d2b1d13

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	release branch: Fix: --enable-werror

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/b2/b2e445cf19788caa3640e8cfacab82995d2b1d13/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/step-over-syscall.exp: clone: displaced=off: single step over clone
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/422>

Commit(s) tested:
	24b03ea864424cf8482ba07fb074389aa759e592

Author(s) (in the same order as the commits):
	John Baldwin <jhb@FreeBSD.org>

Subject:
	PR threads/20743: Don't attempt to suspend or resume exited threads.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/24/24b03ea864424cf8482ba07fb074389aa759e592/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-var-rtti.exp: run to mi-var-rtti.cc:250
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: killed outside: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Ubuntu-AArch32-native-gdbserver-m32, branch gdb-8.0-branch

[sergiodj+buildbot]

Buildslave:
	ubuntu-trusty-aarch32-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Ubuntu-AArch32-native-gdbserver-m32/builds/418>

Commit(s) tested:
	2e341fefa9fb8e63c9ac930a1f2228a06d496706

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set development mode to "off" by default.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Ubuntu-AArch32-native-gdbserver-m32/2e/2e341fefa9fb8e63c9ac930a1f2228a06d496706/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
new FAIL: gdb.threads/sigstep-threads.exp: continue
new FAIL: gdb.threads/sigstep-threads.exp: step 9
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.