[binutils-gdb/gdb-8.2-branch] Set TYPE_LENGTH on a variant part

[binutils-gdb/gdb-8.2-branch] Set TYPE_LENGTH on a variant part

[sergiodj+buildbot]

*** TEST RESULTS FOR COMMIT c07c917f276d6e055a4e6ba5be5d6b9c4d355de7 ***

Author: Tom Tromey <tom@tromey.com>
Branch: gdb-8.2-branch
Commit: c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Set TYPE_LENGTH on a variant part

gdb represents a DW_TAG_variant_part as a union.  While normally DWARF
would not set the size of a DW_TAG_variant_part, gdb's representation
requires the TYPE_LENGTH to be set.

This patch arranges to set the TYPE_LENGTH of a variant part if it has
not already been set.

This fixes some Rust regressions when testing against a version of
rustc that emits DW_TAG_variant_part.

2018-08-31  Tom Tromey  <tom@tromey.com>

	* dwarf2read.c (dwarf2_add_field): Set the TYPE_LENGTH of the
	variant part type.

Failures on RHEL-s390x-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	rhel-7_1-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/RHEL-s390x-m64/builds/8230>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/RHEL-s390x-m64/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.base/siginfo-obj.exp: extract si_errno
PASS -> FAIL: gdb.base/siginfo-thread.exp: extract si_errno
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_setup: main stop
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_setup: inferior 2: continue to breakpoint: main breakpoint
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_setup: inferior 2: stop at breakpoint in main
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_setup: inferior 2: set thread-specific breakpoint, thread 2.2
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_setup: inferior 2: thread 2.2 stops CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_setup: inferior 2: thread 2.2 stops MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_inferior: reset selection to thread 1.1
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_inferior: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_inferior: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_inferior: CLI select inferior
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_inferior: event on MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_inferior: CLI select inferior again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_inferior: event on MI again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.2: select thread
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.2: select thread, event on MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.2: select thread again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.2: select thread, event on MI again, ensure no output MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.2: thread without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.2: thread without args, event on MI, ensure no output MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.3: select thread
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.3: select thread, event on MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.3: select thread again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.3: select thread again, event on MI, ensure no output MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.3: thread without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_thread: thread 1.3: thread without args, event on MI, ensure no output MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.2: reset selection to thread 1.2
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.2: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.2: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.2: select frame 1
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.2: select frame 1, event on MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.2: select frame 1 again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.2: select frame 1 again, event on MI, ensure no output MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.2: frame without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.2: frame without args, event on MI, ensure no output MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.3: reset selection to thread 1.3
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.3: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.3: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.3: select frame 1
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.3: select frame 1, event on MI, ensure no output MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.3: frame without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_frame: thread 1.3: frame without args, event on MI, ensure no output MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.2: reset selection to thread 1.2
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.2: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.2: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.2: select frame 1
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.2: select frame 1, event on MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.2: select frame 1 again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.2: select frame 1 again, event on MI, ensure no output MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.3: reset selection to thread 1.3
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.3: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.3: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.3: select frame 1
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_select_frame: thread 1.3: select frame 1, event on MI, ensure no output MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_up_down: reset selection to thread 1.2
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_up_down: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_up_down: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_up_down: frame up
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_up_down: frame up, event on MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_up_down: frame down
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_cli_up_down: frame down, event on MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: thread 1.2: -thread-select
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: thread 1.2: -thread-select, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: thread 1.2: -thread-select again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: thread 1.2: -thread-select again, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: thread 1.3: -thread-select
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: thread 1.3: -thread-select, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: thread 1.3: -thread-select again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: thread 1.3: -thread-select again, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_thread_select: thread 1.2 with --thread: -thread-select
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.2: reset selection to thread 1.2
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.2: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.2: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.2: -stack-select-frame
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.2: -stack-select-frame, event on MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.2: -stack-select-frame again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.2: -stack-select-frame again, event on MI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.3: reset selection to thread 1.3
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.3: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.3: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.3: -stack-select-frame
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: test_mi_stack_select_frame: thread 1.3: -stack-select-frame, event on MI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_inferior: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_inferior: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_inferior: select inferior
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_inferior: select inferior, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_inferior: select inferior again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_inferior: select inferior again, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.2: select thread
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.2: select thread, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.2: select thread again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.2: select thread again, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.2: thread without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.2: thread without args, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.3: select thread
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.3: select thread, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.3: select thread again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.3: select thread again, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.3: thread without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_thread: thread 1.3: thread without args, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.2: reset selection to thread 1.2
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.2: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.2: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.2: select frame 1
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.2: select frame 1, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.2: select frame 1 again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.2: select frame 1 again, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.2: frame without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.2: frame without args, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.3: reset selection to thread 1.3
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.3: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.3: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.3: select frame 1
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.3: select frame 1, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.3: frame without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=direct: test_cli_in_mi_frame: thread 1.3: frame without args, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_inferior: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_inferior: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_inferior: select inferior
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_inferior: select inferior, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_inferior: select inferior again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_inferior: select inferior again, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.2: select thread
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.2: select thread, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.2: select thread again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.2: select thread again, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.2: thread without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.2: thread without args, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.3: select thread
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.3: select thread, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.3: select thread again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.3: select thread again, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.3: thread without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_thread: thread 1.3: thread without args, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.2: reset selection to thread 1.2
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.2: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.2: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.2: select frame 1
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.2: select frame 1, event on CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.2: select frame 1 again
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.2: select frame 1 again, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.2: frame without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.2: frame without args, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.3: reset selection to thread 1.3
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.3: flush CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.3: flush MI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.3: select frame 1
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.3: select frame 1, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.3: frame without args
PASS -> FAIL: gdb.mi/user-selected-context-sync.exp: mode=non-stop: exec_mode=interpreter-exec: test_cli_in_mi_frame: thread 1.3: frame without args, event on CLI, ensure no output CLI
PASS -> FAIL: gdb.python/python.exp: set the hook to default
new FAIL: gdb.python/python.exp: set the hook
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
PASS -> FAIL: gdb.threads/schedlock.exp: schedlock=off: cmd=next: call_function=0: other threads ran - unlocked
PASS -> FAIL: gdb.threads/signal-while-stepping-over-bp-other-thread.exp: step
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-extended-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-extended-gdbserver-m64/builds/6535>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-extended-gdbserver-m64/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.multi/multi-attach.exp: attach to program 2
PASS -> FAIL: gdb.multi/multi-attach.exp: backtrace 2
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
FAIL -> UNRESOLVED: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left
UNRESOLVED -> FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6390>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-m64/builds/6343>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-m64/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/list-thread-groups-available.exp: list available thread groups
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-i686, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-i686/builds/10848>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-i686/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
new FAIL: gdb.base/catch-syscall.exp: multiple targets: insert catch syscall on syscall 1 -- write on i386:x86-64
new FAIL: gdb.base/info-os.exp: continue to breakpoint: Set breakpoint here
new FAIL: gdb.base/info-os.exp: get shared memory key
new FAIL: gdb.base/info-os.exp: get shared memory ID
new FAIL: gdb.base/info-os.exp: get semaphore key
new FAIL: gdb.base/info-os.exp: get semaphore ID
new FAIL: gdb.base/info-os.exp: get message queue key
new FAIL: gdb.base/info-os.exp: get message queue ID
new FAIL: gdb.base/info-os.exp: get socket port number
new FAIL: gdb.base/info-os.exp: get process list
new UNRESOLVED: gdb.base/info-os.exp: get process groups
new UNRESOLVED: gdb.base/info-os.exp: get threads
new UNRESOLVED: gdb.base/info-os.exp: get file descriptors
new UNRESOLVED: gdb.base/info-os.exp: get internet-domain sockets
new UNRESOLVED: gdb.base/info-os.exp: get shared-memory regions
new UNRESOLVED: gdb.base/info-os.exp: get semaphores
new UNRESOLVED: gdb.base/info-os.exp: get message queues
new UNRESOLVED: gdb.base/info-os.exp: continue
new FAIL: gdb.python/py-finish-breakpoint2.exp: set FinishBP after the exception
new FAIL: gdb.python/py-finish-breakpoint2.exp: check FinishBreakpoint in catch
new FAIL: gdb.python/py-finish-breakpoint2.exp: check finish BP removal
new FAIL: gdb.python/py-finish-breakpoint2.exp: continue to second exception
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: watchpoint after the second fork
PASS -> FAIL: gdb.threads/watchpoint-fork.exp: child: singlethreaded: finish
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-cc-with-index, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-4

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/10763>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-cc-with-index/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.multi/multi-arch-exec.exp: first_arch=1: selected_thread=1: follow_exec_mode=new: continue across exec that changes architecture
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/10584>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m32/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
new FAIL: gdb.base/corefile.exp: core-file warning-free
PASS -> FAIL: gdb.base/multi-forks.exp: run to exit 1
FAIL -> UNRESOLVED: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=main: force-fail=1: run failure detected
FAIL -> UNRESOLVED: gdb.mi/mi-exec-run.exp: inferior-tty=main: mi=separate: force-fail=1: run failure detected
FAIL -> UNRESOLVED: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=main: force-fail=1: run failure detected
FAIL -> UNRESOLVED: gdb.mi/mi-exec-run.exp: inferior-tty=separate: mi=separate: force-fail=1: run failure detected
PASS -> FAIL: gdb.multi/multi-term-settings.exp: inf1_how=attach: inf2_how=attach: stop with control-c
PASS -> UNRESOLVED: gdb.threads/attach-into-signal.exp: threaded: attach
new FAIL: gdb.threads/attach-into-signal.exp: threaded: thread apply 2 print $_siginfo.si_signo
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: watchpoint: continue
new KFAIL: gdb.threads/watchthreads2.exp: gdb can drop watchpoints in multithreaded app
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-extended-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m64/builds/10855>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m64/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/10810>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-gdbserver-m64/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
new UNRESOLVED: gdb.mi/mi-break.exp: mi-mode=separate:
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-m32, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m32/builds/10596>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-m32/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-x86_64-native-gdbserver-m32, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m32/builds/10583>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-gdbserver-m32/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
UNRESOLVED -> FAIL: gdb.base/interrupt.exp: echo data
new FAIL: gdb.base/interrupt.exp: Send Control-C, second time
new FAIL: gdb.base/interrupt.exp: signal SIGINT
new UNRESOLVED: gdb.base/interrupt.exp: echo more data
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Fedora-s390x-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	marist-fedora-s390x

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/9551>

Commit(s) tested:
	c07c917f276d6e055a4e6ba5be5d6b9c4d355de7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Set TYPE_LENGTH on a variant part

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-s390x-m64/c0/c07c917f276d6e055a4e6ba5be5d6b9c4d355de7/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
PASS -> KFAIL: gdb.threads/non-ldr-exit.exp: program exits normally
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/7466>

Commit(s) tested:
	6d33d996167a33552b68c036f1b1571a208ace42

Author(s) (in the same order as the commits):
	Nick Clifton <nickc@redhat.com>

Subject:
	Import patch to fix PR23919 from the mainline.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/6d/6d33d996167a33552b68c036f1b1571a208ace42/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/7113>

Commit(s) tested:
	ca0560bb34ac7f194cadfe6e036f1365cf440466

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Bump GDB version number to 8.2.1.DATE-git.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/ca/ca0560bb34ac7f194cadfe6e036f1365cf440466/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/7112>

Commit(s) tested:
	15146ff7370d5abad01dbecfacb0bf0e66a93cd6

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set GDB version number to 8.2.1.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/15/15146ff7370d5abad01dbecfacb0bf0e66a93cd6/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/7106>

Commit(s) tested:
	6ef08cc9a8e7ce3f64ebbb67ea7b628129d3dc4f

Author(s) (in the same order as the commits):
	Paul Marechal <paul.marechal@ericsson.com>

Subject:
	gdb: Fix "info os <unknown>" command

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/6e/6ef08cc9a8e7ce3f64ebbb67ea7b628129d3dc4f/>

*** Diff to previous build ***
============================
new FAIL: gdb.base/info-os.exp: info os unknown_entry
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=kill: continue in inferior 1
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
PASS -> UNRESOLVED: gdb.trace/tspeed.exp: print iters = init_iters
PASS -> FAIL: gdb.trace/tspeed.exp: advance through tracing
PASS -> FAIL: gdb.trace/tspeed.exp: check on trace status
new FAIL: gdb.trace/tspeed.exp: tstop
new FAIL: gdb.trace/tspeed.exp: set conditional fast tracepoint
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/7096>

Commit(s) tested:
	efa138468817d1d26d1a57c0c772793f31908064

Author(s) (in the same order as the commits):
	Sangamesh Mallayya <sangamesh.swamy@in.ibm.com>

Subject:
	Fix SYMBOL_LANGUAGE assertion failure on AIX.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/ef/efa138468817d1d26d1a57c0c772793f31908064/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias foo
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/7095>

Commit(s) tested:
	438b265f3e29bf2cc6aa025295e838ccb361d148

Author(s) (in the same order as the commits):
	Sergio Durigan Junior <sergiodj@redhat.com>

Subject:
	Fix dwarf2read.c:dwarf2_find_containing_comp_unit's binary search

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/43/438b265f3e29bf2cc6aa025295e838ccb361d148/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/new-ui-mi-sync.exp: sync-command=run: add-inferior
PASS -> FAIL: gdb.mi/new-ui-mi-sync.exp: sync-command=run: interrupt on the CLI
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=kill: continue in inferior 1
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6990>

Commit(s) tested:
	7d9e516326ff542b3c9c85a3c08be2622d9126b6

Author(s) (in the same order as the commits):
	Benno Fünfstück <benno.fuenfstueck@gmail.com>

Subject:
	Make command-repeat work after gdb.execute

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/7d/7d9e516326ff542b3c9c85a3c08be2622d9126b6/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6965>

Commit(s) tested:
	52ec8c2b0264127d8e7468ab28a0ee079ebc487f

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb.base/warning.exp tweaks

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/52/52ec8c2b0264127d8e7468ab28a0ee079ebc487f/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6964>

Commit(s) tested:
	9ec912f34410c33de581b5af4a0773c12b4fe20a

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Avoid crash when calling warning too early

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/9e/9ec912f34410c33de581b5af4a0773c12b4fe20a/>

*** Diff to previous build ***
============================
new FAIL: gdb.arch/s390-vregs.exp: info registers vector
PASS -> FAIL: gdb.base/break-idempotent.exp: always-inserted off: break: continue
PASS -> FAIL: gdb.base/break-idempotent.exp: always-inserted off: hbreak: continue
PASS -> FAIL: gdb.base/break-idempotent.exp: always-inserted off: watch: continue
PASS -> FAIL: gdb.base/break-idempotent.exp: always-inserted on: break: continue
PASS -> FAIL: gdb.base/break-idempotent.exp: always-inserted on: hbreak: continue
PASS -> FAIL: gdb.base/break-idempotent.exp: always-inserted on: watch: continue
PASS -> FAIL: gdb.base/break-unload-file.exp: cmdline: always-inserted off: break: continue
PASS -> FAIL: gdb.base/break-unload-file.exp: cmdline: always-inserted off: hbreak: continue
PASS -> FAIL: gdb.base/break-unload-file.exp: cmdline: always-inserted on: break: continue
PASS -> FAIL: gdb.base/break-unload-file.exp: file: always-inserted off: break: continue
PASS -> FAIL: gdb.base/break-unload-file.exp: file: always-inserted off: hbreak: continue
PASS -> FAIL: gdb.base/break-unload-file.exp: file: always-inserted on: break: continue
PASS -> FAIL: gdb.base/compare-sections.exp: after reload: compare-sections
PASS -> FAIL: gdb.base/compare-sections.exp: after reload: compare-sections -r
PASS -> FAIL: gdb.base/compare-sections.exp: compare-sections .text
PASS -> FAIL: gdb.base/compare-sections.exp: after run to main: compare-sections
PASS -> FAIL: gdb.base/compare-sections.exp: after run to main: compare-sections -r
PASS -> FAIL: gdb.base/compare-sections.exp: read-only: get value of read-only section
PASS -> FAIL: gdb.base/dump.exp: dump array as value, intel hex
PASS -> FAIL: gdb.base/dump.exp: dump struct as value, intel hex
PASS -> FAIL: gdb.base/dump.exp: dump array as memory, ihex
PASS -> FAIL: gdb.base/dump.exp: dump struct as memory, ihex
PASS -> FAIL: gdb.base/dump.exp: array as value, srec; value restored ok
PASS -> FAIL: gdb.base/dump.exp: struct as value, srec; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array as memory, srec; value restored ok
PASS -> FAIL: gdb.base/dump.exp: struct as memory, srec; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array as value, ihex; file restored ok
PASS -> FAIL: gdb.base/dump.exp: array as value, ihex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: struct as value, ihex; file restored ok
PASS -> FAIL: gdb.base/dump.exp: struct as value, ihex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array as memory, ihex; file restored ok
PASS -> FAIL: gdb.base/dump.exp: array as memory, ihex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: struct as memory, ihex; file restored ok
PASS -> FAIL: gdb.base/dump.exp: struct as memory, ihex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array as value, tekhex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: struct as value, tekhex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array as memory, tekhex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: struct as memory, tekhex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array copy, srec; value restored ok
PASS -> FAIL: gdb.base/dump.exp: struct copy, srec; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array copy, ihex; file restored ok
PASS -> FAIL: gdb.base/dump.exp: array copy, ihex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: struct copy, ihex; file restored ok
PASS -> FAIL: gdb.base/dump.exp: struct copy, ihex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array copy, tekhex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: struct copy, tekhex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array partial, srec; file restored ok
PASS -> FAIL: gdb.base/dump.exp: array partial, srec; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array partial, ihex; file restored ok
PASS -> FAIL: gdb.base/dump.exp: array partial, ihex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array partial, tekhex; file restored ok
PASS -> FAIL: gdb.base/dump.exp: array partial, tekhex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: array partial with expressions; file restored ok
PASS -> FAIL: gdb.base/dump.exp: array partial with expressions; value restored ok
PASS -> FAIL: gdb.base/dump.exp: reload array as value, srec; value restored ok
PASS -> FAIL: gdb.base/dump.exp: reload struct as value, srec; value restored ok
PASS -> FAIL: gdb.base/dump.exp: reload array as memory, srec; value restored ok
PASS -> FAIL: gdb.base/dump.exp: reload struct as memory, srec; value restored ok
PASS -> UNRESOLVED: gdb.base/dump.exp: reload array as value, intel hex; capture
PASS -> FAIL: gdb.base/dump.exp: reload array as value, intel hex; value restored ok
PASS -> UNRESOLVED: gdb.base/dump.exp: reload struct as value, intel hex; capture
PASS -> FAIL: gdb.base/dump.exp: reload struct as value, intel hex; value restored ok
PASS -> UNRESOLVED: gdb.base/dump.exp: reload array as memory, intel hex; capture
PASS -> FAIL: gdb.base/dump.exp: reload array as memory, intel hex; value restored ok
PASS -> UNRESOLVED: gdb.base/dump.exp: reload struct as memory, intel hex; capture
PASS -> FAIL: gdb.base/dump.exp: reload struct as memory, intel hex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: reload array as value, tekhex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: reload struct as value, tekhex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: reload array as memory, tekhex; value restored ok
PASS -> FAIL: gdb.base/dump.exp: reload struct as memory, tekhex; value restored ok
PASS -> FAIL: gdb.base/info-os.exp: get process groups
PASS -> FAIL: gdb.base/info-os.exp: get threads
PASS -> FAIL: gdb.base/info-os.exp: get file descriptors
PASS -> FAIL: gdb.base/info-os.exp: get internet-domain sockets
PASS -> FAIL: gdb.base/info-os.exp: get shared-memory regions
PASS -> FAIL: gdb.base/info-os.exp: get semaphores
PASS -> FAIL: gdb.base/info-os.exp: get message queues
PASS -> FAIL: gdb.base/info-os.exp: continue
PASS -> FAIL: gdb.base/store.exp: var doublest l; print old l, expecting -1
PASS -> FAIL: gdb.base/store.exp: var doublest l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: var doublest l; print incremented l, expecting 2
PASS -> FAIL: gdb.base/store.exp: upvar float l; print old l, expecting -1
PASS -> FAIL: gdb.base/store.exp: upvar float l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: upvar float l; set l to 4
PASS -> FAIL: gdb.base/store.exp: upvar float l; print new l, expecting 4
PASS -> FAIL: gdb.base/store.exp: upvar double l; print old l, expecting -1
PASS -> FAIL: gdb.base/store.exp: upvar double l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: upvar double l; set l to 4
PASS -> FAIL: gdb.base/store.exp: upvar double l; print new l, expecting 4
PASS -> FAIL: gdb.base/store.exp: upvar doublest l; print old l, expecting -1
PASS -> FAIL: gdb.base/store.exp: upvar doublest l; print old r, expecting -2
PASS -> FAIL: gdb.base/store.exp: upvar doublest l; set l to 4
PASS -> FAIL: gdb.base/store.exp: upvar doublest l; print new l, expecting 4
new KFAIL: gdb.base/utf8-identifiers.exp: tab complete "break fun"
new FAIL: gdb.cp/no-dmgl-verbose.exp: setting breakpoint at 'f
PASS -> FAIL: gdb.dwarf2/dw2-ranges.exp: info line main3
PASS -> FAIL: gdb.server/solib-list.exp: non-stop 0: p libvar
PASS -> FAIL: gdb.server/solib-list.exp: non-stop 1: p libvar
PASS -> FAIL: gdb.threads/execl.exp: continue across exec
PASS -> FAIL: gdb.threads/execl.exp: info threads after exec
PASS -> FAIL: gdb.threads/execl.exp: continue until exit
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/multiple-successive-infcall.exp: thread=5: created new thread
new FAIL: gdb.threads/multiple-successive-infcall.exp: thread=4: created new thread
new FAIL: gdb.threads/multiple-successive-infcall.exp: thread=3: created new thread
PASS -> FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: select trace file
PASS -> FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: tfind 0
PASS -> FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: tfind 0 again
PASS -> FAIL: gdb.trace/qtro.exp: qXfer:traceframe-info:read off: trace disassembly
PASS -> FAIL: gdb.trace/read-memory.exp: live target tfind: print constglob_not_collected
PASS -> FAIL: gdb.trace/read-memory.exp: remote to tfile: w/o setting traceframe: print constglob
PASS -> FAIL: gdb.trace/read-memory.exp: remote to tfile: w/o setting traceframe: print constglob_not_collected
PASS -> FAIL: gdb.trace/read-memory.exp: remote to tfile: w/ setting traceframe: print constglob_not_collected
PASS -> FAIL: gdb.trace/read-memory.exp: exec to tfile w/ setting traceframe: print testglob
PASS -> FAIL: gdb.trace/tfile.exp: info tracepoints on trace file
PASS -> FAIL: gdb.trace/tfile.exp: tfind 0 on trace file
PASS -> FAIL: gdb.trace/tfile.exp: print testglob on trace file
PASS -> FAIL: gdb.trace/tfile.exp: print testglob2 on trace file
PASS -> FAIL: gdb.trace/tfind.exp: 8.36: trace disassembly
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: global reference shows address but not value
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: referenced integer was not collected
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: non collected const string is still printable
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: printing constant string through collected pointer
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_partial
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_partial
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print struct_b
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print /x struct_b
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print /x struct_b.struct_a
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print /x struct_b.struct_a.array
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print /x struct_b.struct_a.array[2]
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: No overcollect of almost but not quite adjacent memory ranges
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: <unavailable> is not the same as 0 in array element repetitions
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print *tarray@3
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: global reference shows address but not value
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: referenced integer was not collected
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print *g_structref_p
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: printing constant string through collected pointer
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: printing partially collected string
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: examining partially collected object
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_partial
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object on: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_partial
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print object off: print derived_whole
PASS -> FAIL: gdb.trace/unavailable.exp: collect globals: tfile: print virtual_partial
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: auto locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: register locals: tfile: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: info locals
PASS -> FAIL: gdb.trace/unavailable.exp: unavailable locals: static locals: tfile: info locals
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6550>

Commit(s) tested:
	b13ab533d38674e6273eb78eeef261d5b0655bbf

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	python: Make gdb.execute("show commands") work (PR 23669)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/b1/b13ab533d38674e6273eb78eeef261d5b0655bbf/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=kill: continue in inferior 1
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6517>

Commit(s) tested:
	5de69bdbd0bbd7941b4cd93d4571f5e22cdb28be

Author(s) (in the same order as the commits):
	Sergio Durigan Junior <sergiodj@redhat.com>

Subject:
	Move 'is_regular_file' from common-utils.c to filestuff.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/5d/5de69bdbd0bbd7941b4cd93d4571f5e22cdb28be/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: killed outside: continue
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6492>

Commit(s) tested:
	fde24e1a534b7df3edd0fc167d0ace7d240021f8

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Make Rust error message mention the field name

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/fd/fde24e1a534b7df3edd0fc167d0ace7d240021f8/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-nonstop.exp: probe for target remote
new FAIL: gdb.mi/mi-nonstop.exp: wait for thread exit
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
PASS -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: detach: continue
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6491>

Commit(s) tested:
	18a27702320ec98fa79a75acd6365ea2348f8852

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix crash with empty Rust enum

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/18/18a27702320ec98fa79a75acd6365ea2348f8852/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias foo
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6445>

Commit(s) tested:
	7c09445cf887b2501ce33e47cdd0d1c2545b6934

Author(s) (in the same order as the commits):
	Eli Zaretskii <eliz@gnu.org>

Subject:
	Fix "make install-strip" failure to install gdb-add-index.sh

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/7c/7c09445cf887b2501ce33e47cdd0d1c2545b6934/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6412>

Commit(s) tested:
	f0b71378f1e781945a8b05061114fce5af9e2f12

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Bump GDB version number to 8.2.0.DATE-git.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/f0/f0b71378f1e781945a8b05061114fce5af9e2f12/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=kill: continue in inferior 1
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6411>

Commit(s) tested:
	00f223631fa9803b783515a2f667f86997e2cdbe

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set GDB version number to 8.2.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/00/00f223631fa9803b783515a2f667f86997e2cdbe/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6408>

Commit(s) tested:
	f30171bf98082846a725c1d116650d0c8998564c

Author(s) (in the same order as the commits):
	Sergio Durigan Junior <sergiodj@redhat.com>

Subject:
	fix incorrect gnulib getcwd replacement when cross-compiling GDB

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/f3/f30171bf98082846a725c1d116650d0c8998564c/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6389>

Commit(s) tested:
	7b93bc4c624821352ce32734c89589102eaded87

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix a small bug in gdb.rust/simple.rs

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/7b/7b93bc4c624821352ce32734c89589102eaded87/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6345>

Commit(s) tested:
	145a1cb045dcb73002e06d33f011d9185502e3c4

Author(s) (in the same order as the commits):
	Philippe Waroquiers <philippe.waroquiers@skynet.be>

Subject:
	Modify gdb.base/commands.exp to test multi breakpoints command clearing.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/14/145a1cb045dcb73002e06d33f011d9185502e3c4/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6344>

Commit(s) tested:
	5dc5ecd1fde2c3eba2f0c870ad12c4cb120224d0

Author(s) (in the same order as the commits):
	Philippe Waroquiers <philippe.waroquiers@skynet.be>

Subject:
	Fix regression for multi breakpoints command line clearing.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/5d/5dc5ecd1fde2c3eba2f0c870ad12c4cb120224d0/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6335>

Commit(s) tested:
	fec2cf3421a5195353499d95d340ee002fa5ef9e

Author(s) (in the same order as the commits):
	Alan Hayward <alan.hayward@arm.com>

Subject:
	Parse SVE registers in aarch64 core file reading/writing

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/fe/fec2cf3421a5195353499d95d340ee002fa5ef9e/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=9: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6334>

Commit(s) tested:
	fb20254d1ac83c182daf37698fdcf281c24e08f3

Author(s) (in the same order as the commits):
	Alan Hayward <alan.hayward@arm.com>

Subject:
	Detect SVE when reading aarch64 core files

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/fb/fb20254d1ac83c182daf37698fdcf281c24e08f3/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias foo
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6333>

Commit(s) tested:
	bf0f22c10f0cb035836aa31c3b11e0e09c57e604

Author(s) (in the same order as the commits):
	Alan Hayward <alan.hayward@arm.com>

Subject:
	Split size in regset section iterators

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/bf/bf0f22c10f0cb035836aa31c3b11e0e09c57e604/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/new-ui-mi-sync.exp: sync-command=run: add-inferior
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6332>

Commit(s) tested:
	d29c8c214cb296e0e20f6e88f27535c340ca98db

Author(s) (in the same order as the commits):
	Alan Hayward <alan.hayward@arm.com>

Subject:
	Rename size in get_core_register_section

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/d2/d29c8c214cb296e0e20f6e88f27535c340ca98db/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias foo
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: inferior 1 exited
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6311>

Commit(s) tested:
	83b6e2e989510db105c52a02c490ab2c284b5469

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@ericsson.com>

Subject:
	Restore behavior of disabling address randomization by default on GDBserver

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/83/83b6e2e989510db105c52a02c490ab2c284b5469/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6309>

Commit(s) tested:
	c6f50f8869ac0dd10040f5c32387eb404f9ff50a

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Initialize variable in py_get_event_thread

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/c6/c6f50f8869ac0dd10040f5c32387eb404f9ff50a/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
PASS -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: detach: continue
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6302>

Commit(s) tested:
	6518e6562b56b258c4933fcb8bce057215544a8f

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Test case for functions with non-contiguous ranges

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/65/6518e6562b56b258c4933fcb8bce057215544a8f/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6301>

Commit(s) tested:
	cb0f34520d4e4ad233696a293d69c979418f3ccd

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Relocate block range start and end addresses

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/cb/cb0f34520d4e4ad233696a293d69c979418f3ccd/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-nonstop.exp: probe for target remote
new FAIL: gdb.mi/mi-nonstop.exp: wait for thread exit
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6300>

Commit(s) tested:
	65a1b8803a0d3a3a4f3fce3b289dc4a06048d5f2

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Introduce find_function_entry_range_from_pc and use it in infrun.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/65/65a1b8803a0d3a3a4f3fce3b289dc4a06048d5f2/>

*** Diff to previous build ***
============================
new UNRESOLVED: gdb.mi/mi-break.exp: mi-mode=separate:
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6299>

Commit(s) tested:
	84b14f21ca4257a882a28ba1cbd49dbbcea555db

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Use BLOCK_ENTRY_PC in place of most uses of BLOCK_START

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/84/84b14f21ca4257a882a28ba1cbd49dbbcea555db/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias foo
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6298>

Commit(s) tested:
	9fef689604c87f695e947a52a6eff7da4f13a0f8

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Disassemble blocks with non-contiguous ranges

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/9f/9fef689604c87f695e947a52a6eff7da4f13a0f8/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-nonstop.exp: probe for target remote
new FAIL: gdb.mi/mi-nonstop.exp: wait for thread exit
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6297>

Commit(s) tested:
	11c9ee15880d4f8ec86b82905300736cfa091c60

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Add support for non-contiguous blocks to find_pc_partial_function

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/11/11c9ee15880d4f8ec86b82905300736cfa091c60/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6296>

Commit(s) tested:
	8cad3755f9d24f236699ecf4100c116095f7ab01

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Record explicit block ranges from dwarf2read.c

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/8c/8cad3755f9d24f236699ecf4100c116095f7ab01/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
PASS -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: killed outside: continue
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6295>

Commit(s) tested:
	76dae9eb044ab86c242724968f541ee6702851af

Author(s) (in the same order as the commits):
	Kevin Buettner <kevinb@redhat.com>

Subject:
	Add block range data structure for blocks with non-contiguous address ranges

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/76/76dae9eb044ab86c242724968f541ee6702851af/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias foo
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6291>

Commit(s) tested:
	0e84db8c75a5afbfef02a295f4f8867bd07ea12d

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	Fix 8.2 regression in gdb.python/py-evthreads.exp w/ gdbserver (PR gdb/23379)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/0e/0e84db8c75a5afbfef02a295f4f8867bd07ea12d/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6277>

Commit(s) tested:
	6354b6519382f592c81932631c7d45c61d6ba5b7

Author(s) (in the same order as the commits):
	Xavier Roirand <roirand@adacore.com>

Subject:
	Darwin: fix bad loop incrementation

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/63/6354b6519382f592c81932631c7d45c61d6ba5b7/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=4: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=5: wait for stops
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6262>

Commit(s) tested:
	7c46ec12730d911b0a3d0f5aaafb1ba12f0bdeac

Author(s) (in the same order as the commits):
	Alan Hayward <alan.hayward@arm.com>

Subject:
	Aarch64 SVE VG is Vector Granule

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/7c/7c46ec12730d911b0a3d0f5aaafb1ba12f0bdeac/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6261>

Commit(s) tested:
	694b0fb308cb7a6b19cd6323d9284408a503de9c

Author(s) (in the same order as the commits):
	Alan Hayward <alan.hayward@arm.com>

Subject:
	Add AArch64 SVE to NEWS and GDB manual

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/69/694b0fb308cb7a6b19cd6323d9284408a503de9c/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6233>

Commit(s) tested:
	84a39102d73de5b195b3f8037780ed2133db1fb7

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Remove "repeat" argument from command_line_input

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/84/84a39102d73de5b195b3f8037780ed2133db1fb7/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-nonstop.exp: probe for target remote
new FAIL: gdb.mi/mi-nonstop.exp: wait for thread exit
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias foo
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6232>

Commit(s) tested:
	5424be6a70bd9b462e7fd72e817367602c354e2c

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix use-after-free in number_or_range_parser

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/54/5424be6a70bd9b462e7fd72e817367602c354e2c/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6122>

Commit(s) tested:
	599849befcc9a03584c7c03e65e5d5cf7ea0e4e8

Author(s) (in the same order as the commits):
	Simon Marchi <simon.marchi@polymtl.ca>

Subject:
	Remove struct keyword in range-based for loop

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/59/599849befcc9a03584c7c03e65e5d5cf7ea0e4e8/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-nonstop.exp: probe for target remote
new FAIL: gdb.mi/mi-nonstop.exp: wait for thread exit
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6074>

Commit(s) tested:
	450cf17e305ba3dcccfff7643e85537f1de58d9c

Author(s) (in the same order as the commits):
	Alan Hayward <alan.hayward@arm.com>

Subject:
	Rename tdesc_register_size to tdesc_register_bitsize

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/45/450cf17e305ba3dcccfff7643e85537f1de58d9c/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=15: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6070>

Commit(s) tested:
	9eb8d8e3e025323c9c5566b36c1fdc331aa33132

Author(s) (in the same order as the commits):
	Keith Seitz <keiths@redhat.com>

Subject:
	Set CU language before processing any DIEs (symtab/23010 et al)

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/9e/9eb8d8e3e025323c9c5566b36c1fdc331aa33132/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6053>

Commit(s) tested:
	80860e6dad00190660c49b60bbbefee1648a46e2

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Pass the correct argument to the observer in reread_symbols

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/80/80860e6dad00190660c49b60bbbefee1648a46e2/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/new-ui-mi-sync.exp: sync-command=run: add-inferior
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/6052>

Commit(s) tested:
	ac4f58d797780e305ba7be2c5d7efa8abf45fb74

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Fix ravenscar-thread.c to use arch_ops

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/ac/ac4f58d797780e305ba7be2c5d7efa8abf45fb74/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=16: wait for stops
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/5992>

Commit(s) tested:
	6b5c10c4f80cd4a741f3e378a3a42f3ed1741d49

Author(s) (in the same order as the commits):
	Eli Zaretskii <eliz@gnu.org>

Subject:
	Fix GDB build using mingw.org's MinGW

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/6b/6b5c10c4f80cd4a741f3e378a3a42f3ed1741d49/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=kill: continue in inferior 1
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias
PASS -> FAIL: gdb.python/py-cmd.exp: multi-line if 1 alias foo
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=3: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=17: wait for stops
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/5964>

Commit(s) tested:
	79b38778d788e01e66e82f16bf3d4957439c77d5

Author(s) (in the same order as the commits):
	Tom Tromey <tom@tromey.com>

Subject:
	Use scoped_free_pendings in coff_symtab_read

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/79/79b38778d788e01e66e82f16bf3d4957439c77d5/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=18: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=19: wait for stops
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: single-process: continue: detach: continue
PASS -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: detach: continue
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/5899>

Commit(s) tested:
	82e080dcf7289255f3a9bf6b860d4864aa93e554

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	GDBserver: Fix "Cond. jump or move depends on uninit value" in x87 code

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/82/82e080dcf7289255f3a9bf6b860d4864aa93e554/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=6: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=14: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/5898>

Commit(s) tested:
	ad3c631a762734c39b85086d20ba28940c2fc9b8

Author(s) (in the same order as the commits):
	Sergio Durigan Junior <sergiodj@redhat.com>

Subject:
	Fix PR c++/23373: GDB hangs when printing a struct with a static member of itself

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/ad/ad3c631a762734c39b85086d20ba28940c2fc9b8/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=2: wait for stops
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/5854>

Commit(s) tested:
	dbc864ae0befb776deae11a6e420ba7f1c6b80c4

Author(s) (in the same order as the commits):
	Jan Kratochvil <jan.kratochvil@redhat.com>

Subject:
	contrib/gdb-add-index.sh -dwarf-5

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/db/dbc864ae0befb776deae11a6e420ba7f1c6b80c4/>

*** Diff to previous build ***
============================
PASS -> FAIL: gdb.mi/mi-nonstop.exp: probe for target remote
new FAIL: gdb.mi/mi-nonstop.exp: wait for thread exit
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/5835>

Commit(s) tested:
	1e80936c63d3ad2c1e0a357a8ff1b701dfdb2531

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Bump GDB version number to 8.1.90.DATE-git.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/1e/1e80936c63d3ad2c1e0a357a8ff1b701dfdb2531/>

*** Diff to previous build ***
============================
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=12: wait for stops
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/5834>

Commit(s) tested:
	a37b7a0260c019bbbaa9d7cc205f2d0f9fa21292

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set GDB version number to 8.1.90.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/a3/a37b7a0260c019bbbaa9d7cc205f2d0f9fa21292/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
PASS -> FAIL: gdb.reverse/s390-mvcle.exp: check MVCLE record 3
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=8: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=10: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=11: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=13: wait for stops
UNRESOLVED -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: server exits
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/5833>

Commit(s) tested:
	564d85cd9fc88b1e82336dc06fc32bcb7ed80a04

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	gdb/NEWS: Change "Changes since GDB 8.1" into "Changes in GDB 8.2".

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/56/564d85cd9fc88b1e82336dc06fc32bcb7ed80a04/>

*** Diff to previous build ***
============================
FAIL -> UNRESOLVED: gdb.threads/process-dies-while-detaching.exp: multi-process: continue: watchpoint: continue
PASS -> FAIL: gdb.trace/mi-tsv-changed.exp: create delete modify: tvariable $tvar3 modified
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.

Failures on Debian-s390x-native-gdbserver-m64, branch gdb-8.2-branch

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/5830>

Commit(s) tested:
	a001924968a71f2384f9d41ad2b7700f3b97745d

Author(s) (in the same order as the commits):
	Joel Brobecker <brobecker@adacore.com>

Subject:
	Set development mode to "off" by default.

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/a0/a001924968a71f2384f9d41ad2b7700f3b97745d/>

*** Diff to previous build ***
============================
PASS -> UNRESOLVED: gdb.multi/watchpoint-multi-exit.exp: dispose=detach: continue in inferior 1
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=1: wait for stops
new FAIL: gdb.threads/interrupt-while-step-over.exp: displaced-stepping=off: iter=7: wait for stops
PASS -> FAIL: gdb.threads/interrupted-hand-call.exp: continue until exit
PASS -> FAIL: gdb.threads/thread-unwindonsignal.exp: continue until exit
============================


*** Complete list of XFAILs for this builder ***

FAILURE TO OBTAIN THE COMMIT FOR THE XFAIL LIST.  PLEASE CONTACT THE BUILDBOT ADMIN.