Failures on RHEL-s390x-m64, branch master

Failures on RHEL-s390x-m64, branch master

[sergiodj+buildbot]

Buildslave:
	rhel-7_1-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/RHEL-s390x-m64/builds/7732>

Commit(s) tested:
	a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove traces of h8300 ecoff support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/RHEL-s390x-m64/a6/a6f88f6e4458e672b8a72ee0c0998fdc79cf601e/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/RHEL-s390x-m64/xfails/master/xfail?id=007adee>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/RHEL-s390x-m64/xfails/master/xfail.table?id=007adee>

[binutils-gdb] gdb: Remove traces of h8300 ecoff support

[sergiodj+buildbot]

*** TEST RESULTS FOR COMMIT a6f88f6e4458e672b8a72ee0c0998fdc79cf601e ***

Author: Pedro Alves <palves@redhat.com>
Branch: master
Commit: a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

gdb: Remove traces of h8300 ecoff support

There's this little bit of ecoff support in the h8300 port that I ran
into that I think we could remove.  Grepping around BFD, I don't think
ECOFF is supported for h8300.

And if not, I'm failing to see why we'd support ECOFF debug info in
ELF for h8300 (.mdebug).  It kind of seems like someone just installed
the set_gdbarch_ecoff_reg_to_regnum hook at the same time the dwarf2
and stabs hooks were installed.

I'm removing this so that greps for ecoff stuff only lead to MIPS, as
ISTR that Linux/MIPS support still relies on some subset of ECOFF for
something.

gdb/ChangeLog:
2018-07-11  Pedro Alves  <palves@redhat.com>

	* h8300-tdep.c (h8300_gdbarch_init): Remove
	set_gdbarch_ecoff_reg_to_regnum calls.

Failures on Fedora-s390x-m64, branch master

[sergiodj+buildbot]

Buildslave:
	marist-fedora-s390x

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-s390x-m64/builds/9052>

Commit(s) tested:
	a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove traces of h8300 ecoff support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-s390x-m64/a6/a6f88f6e4458e672b8a72ee0c0998fdc79cf601e/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-s390x-m64/xfails/master/xfail?id=1067685>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-s390x-m64/xfails/master/xfail.table?id=1067685>

Failures on Fedora-x86_64-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m32/builds/10050>

Commit(s) tested:
	a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove traces of h8300 ecoff support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-m32/a6/a6f88f6e4458e672b8a72ee0c0998fdc79cf601e/>

*** Diff to previous build ***
============================
new FAIL: gdb.base/corefile.exp: core-file warning-free
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-m32/xfails/master/xfail?id=f52c997>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-m32/xfails/master/xfail.table?id=f52c997>

Failures on Fedora-x86_64-cc-with-index, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-cc-with-index/builds/10217>

Commit(s) tested:
	a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove traces of h8300 ecoff support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-cc-with-index/a6/a6f88f6e4458e672b8a72ee0c0998fdc79cf601e/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-cc-with-index/xfails/master/xfail?id=586e313>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-cc-with-index/xfails/master/xfail.table?id=586e313>

*** COMPILATION FAILED *** Failures on Fedora-x86_64-w64-mingw32, branch master *** BREAKAGE ***

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-w64-mingw32/builds/2151>

Commit(s) tested:
	a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove traces of h8300 ecoff support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-w64-mingw32/a6/a6f88f6e4458e672b8a72ee0c0998fdc79cf601e/>

*** Failed to compiled GDB.  ***
============================
make[1]: Entering directory '/home/gdb-buildbot/fedora-x86-64-1/fedora-x86-64-mingw32/build'
mkdir -p -- ./zlib
mkdir -p -- ./intl
mkdir -p -- ./etc
mkdir -p -- ./libiberty
Configuring in ./zlib
Configuring in ./etc
Configuring in ./intl
Configuring in ./libiberty
configure: creating cache ./config.cache
checking for a BSD-compatible install... /usr/bin/install -c
configure: updating cache ./config.cache
configure: creating ./config.status
configure: creating cache ./config.cache
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
checking whether the C compiler works... configure: creating cache ./config.cache
checking whether to enable maintainer-specific portions of Makefiles... no
checking for makeinfo... makeinfo --split-size=5000000
configure: creating cache ./config.cache
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-w64-mingw32
checking target system type... x86_64-w64-mingw32
yes
checking for C compiler default output file name... a.exe
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... config.status: creating Makefile
checking for suffix of executables... yes
checking for x86_64-w64-mingw32-strip... x86_64-w64-mingw32-strip
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
.exe
checking whether we are cross compiling... yes
checking for suffix of object files... checking whether make supports nested variables... yes
mkdir -p -- ./libdecnumber
Configuring in ./libdecnumber
checking whether to enable maintainer-specific portions of Makefiles... no
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
o
checking whether we are using the GNU C compiler... checking for perl... perl
checking build system type... x86_64-pc-linux-gnu
checking host system type... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... x86_64-w64-mingw32
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking whether to install libiberty headers and static library... no
configure: target_header_dir = 
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
yes
checking for x86_64-w64-mingw32-gcc option to accept ISO C89... checking whether the C compiler works... none needed
checking how to run the C preprocessor... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... x86_64-w64-mingw32-gcc -E
checking whether the C compiler works... .exe
checking whether we are cross compiling... yes
checking for suffix of object files... checking for grep that handles long lines and -e... o
checking whether we are using the GNU C compiler... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... yes
checking for x86_64-w64-mingw32-gcc option to accept ISO C89... .exe
yes
checking whether we are cross compiling... yes
checking for sys/types.h... checking for suffix of object files... none needed
checking whether x86_64-w64-mingw32-gcc understands -c and -o together... yes
o
checking whether we are using the GNU C compiler... configure: creating cache ./config.cache
checking whether make sets $(MAKE)... checking for sys/stat.h... yes
checking for style of include used by make... yes
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
yes
checking whether x86_64-w64-mingw32-gcc accepts -g... GNU
checking dependency style of x86_64-w64-mingw32-gcc... yes
checking for x86_64-w64-mingw32-gcc option to accept ISO C89... yes
checking whether the C compiler works... checking for stdlib.h... yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... yes
gcc3
checking how to print strings... none needed
checking how to run the C preprocessor... checking for string.h... printf
checking for a sed that does not truncate output... /usr/bin/sed
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for fgrep... .exe
checking whether we are cross compiling... yes
/usr/bin/grep -F
checking for ld used by x86_64-w64-mingw32-gcc... checking for suffix of object files... x86_64-w64-mingw32-gcc -E
yes
o
checking whether we are using the GNU C compiler... checking for memory.h... /usr/lib/gcc/x86_64-w64-mingw32/7.2.0/../../../../x86_64-w64-mingw32/bin/ld
checking if the linker (/usr/lib/gcc/x86_64-w64-mingw32/7.2.0/../../../../x86_64-w64-mingw32/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... x86_64-w64-mingw32-nm
checking the name lister (x86_64-w64-mingw32-nm) interface... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... checking for grep that handles long lines and -e... yes
/usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... checking for strings.h... yes
checking for x86_64-w64-mingw32-gcc option to accept ISO C89... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/lib/gcc/x86_64-w64-mingw32/7.2.0/../../../../x86_64-w64-mingw32/bin/ld option to reload object files... -r
checking for x86_64-w64-mingw32-objdump... x86_64-w64-mingw32-objdump
checking how to recognize dependent libraries... file_magic ^x86 archive import|^x86 DLL
checking for x86_64-w64-mingw32-ar... x86_64-w64-mingw32-ar
checking for x86_64-w64-mingw32-strip... (cached) x86_64-w64-mingw32-strip
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking command to parse x86_64-w64-mingw32-nm output from x86_64-w64-mingw32-gcc object... yes
checking for inttypes.h... none needed
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking for aclocal... aclocal
checking for autoconf... autoconf
checking for autoheader... autoheader
checking whether x86_64-w64-mingw32-gcc supports -W... yes
yes
checking whether x86_64-w64-mingw32-gcc supports -Wall... checking for stdint.h... yes
checking for sys/types.h... yes
checking whether x86_64-w64-mingw32-gcc supports -Wwrite-strings... yes
yes
checking for unistd.h... ok
checking how to run the C preprocessor... checking for sys/stat.h... yes
yes
checking whether x86_64-w64-mingw32-gcc supports -Wstrict-prototypes... checking minix/config.h usability... x86_64-w64-mingw32-gcc -E
yes
checking for stdlib.h... no
checking minix/config.h presence... yes
no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... checking whether x86_64-w64-mingw32-gcc supports -Wmissing-prototypes... checking for ANSI C header files... yes
checking for string.h... yes
checking whether x86_64-w64-mingw32-gcc supports -Wold-style-definition... yes
checking for memory.h... yes
checking whether x86_64-w64-mingw32-gcc supports -Wmissing-format-attribute... yes
checking whether make sets $(MAKE)... yes
checking for sys/types.h... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether NLS is requested... yes
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... yes
yes
/usr/bin/xgettext
yes
checking for msgmerge... checking for sys/stat.h... checking whether x86_64-w64-mingw32-gcc supports -Wcast-qual... checking for strings.h... /usr/bin/msgmerge
yes
checking whether x86_64-w64-mingw32-gcc supports -pedantic -Wlong-long... yes
checking build system type... checking for stdlib.h... yes
x86_64-pc-linux-gnu
checking host system type... yes
checking for inttypes.h... x86_64-w64-mingw32
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking for library containing strerror... checking whether x86_64-w64-mingw32-gcc supports -fno-lto... yes
yes
none required
checking for an ANSI C-conforming const... checking for stdint.h... checking for string.h... yes
checking how to run the C preprocessor... x86_64-w64-mingw32-gcc -E
yes
yes
checking for inline... yes
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... checking for memory.h... inline
checking for off_t... checking for unistd.h... yes
yes
yes
checking for strings.h... checking for sys/types.h... checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
yes
checking for size_t... yes
yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... checking for sys/stat.h... checking for inttypes.h... yes
checking for stdint.h... yes
checking for stdlib.h... yes
checking for working alloca.h... 64
yes
checking whether x86_64-w64-mingw32-gcc supports -W... no
checking for alloca... checking for unistd.h... yes
checking whether x86_64-w64-mingw32-gcc supports -Wall... yes
yes
checking for dlfcn.h... yes
yes
checking for string.h... checking for stdlib.h... (cached) yes
checking whether x86_64-w64-mingw32-gcc supports -Wwrite-strings... checking for unistd.h... (cached) yes
no
checking for objdir... yes
checking for sys/param.h... .libs
checking whether x86_64-w64-mingw32-gcc supports -Wc++-compat... yes
checking for memory.h... yes
checking for getpagesize... yes
checking whether x86_64-w64-mingw32-gcc supports -Wstrict-prototypes... yes
checking for strings.h... yes
yes
checking if x86_64-w64-mingw32-gcc supports -fno-rtti -fno-exceptions... checking whether x86_64-w64-mingw32-gcc supports -Wshadow=local... checking for inttypes.h... yes
checking whether x86_64-w64-mingw32-gcc supports -pedantic ... yes
checking for working mmap... no
yes
checking whether we are using the GNU C Library 2.1 or newer... checking for stdint.h... no
checking for x86_64-w64-mingw32-gcc option to produce PIC... -DDLL_EXPORT -DPIC
checking if x86_64-w64-mingw32-gcc PIC flag -DDLL_EXPORT -DPIC works... yes
checking whether x86_64-w64-mingw32-gcc and cc understand -c and -o together... yes
checking for unistd.h... no
checking whether integer division by zero raises SIGFPE... guessing no
checking for inttypes.h... yes
checking if x86_64-w64-mingw32-gcc static flag -static works... yes
checking for stdint.h... no
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... yes
checking ctype.h usability... yes
checking if x86_64-w64-mingw32-gcc supports -c -o file.o... (cached) yes
checking whether the x86_64-w64-mingw32-gcc linker (/usr/lib/gcc/x86_64-w64-mingw32/7.2.0/../../../../x86_64-w64-mingw32/bin/ld) supports shared libraries... yes
checking for unsigned long long... yes
yes
checking whether -lc should be explicitly linked in... checking for an ANSI C-conforming const... yes
checking ctype.h presence... yes
checking for ctype.h... yes
yes
checking for inline... inline
checking whether byte ordering is bigendian... yes
checking for inttypes.h... checking stddef.h usability... yes
checking dynamic linker characteristics... yes
checking whether the inttypes.h PRIxNN macros are broken... no
checking for ld used by GCC... yes
checking stddef.h presence... Win32 ld.exe
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking for stddef.h... yes
yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking how to run the C preprocessor... x86_64-w64-mingw32-gcc -E
checking for string.h... (cached) yes
checking stdio.h usability... /usr/lib/gcc/x86_64-w64-mingw32/7.2.0/../../../../x86_64-w64-mingw32/bin/ld
checking if the linker (/usr/lib/gcc/x86_64-w64-mingw32/7.2.0/../../../../x86_64-w64-mingw32/bin/ld) is GNU ld... no
checking for a BSD-compatible install... /usr/bin/install -c
yes
checking for shared library run path origin... checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... checking for sys/file.h... yes
yes
checking stdio.h presence... checking for sys/param.h... yes
checking for stdio.h... yes
looking for a compliant stdint.h in stdint.h, checking for uintmax_t... done
yes
checking argz.h usability... checking for limits.h... yes
checking for getpagesize... yes
yes
checking for uintptr_t... checking for stdlib.h... (cached) yes
no
checking argz.h presence... checking for malloc.h... no
checking for argz.h... no
checking limits.h usability... yes
yes
checking for working mmap... no
checking for string.h... (cached) yes
checking for memcpy... yes
checking for int_least32_t... checking for unistd.h... (cached) yes
yes
checking limits.h presence... checking for strings.h... (cached) yes
yes
checking for limits.h... yes
checking for sys/time.h... checking locale.h usability... yes
yes
yes
checking for int_fast32_t... checking for strerror... checking for time.h... yes
yes
checking locale.h presence... yes
checking for unistd.h... (cached) yes
yes
checking for locale.h... yes
checking nl_types.h usability... checking for sys/resource.h... no
yes
checking for uint64_t... checking for sys/stat.h... (cached) yes
configure: updating cache ./config.cache
no
checking nl_types.h presence... checking that generated files are newer than configure... done
configure: creating ./config.status
checking for sys/mman.h... no
checking for nl_types.h... no
checking malloc.h usability... no
yes
checking what to include in gstdint.h... checking for fcntl.h... stdint.h (already complete)
checking for an ANSI C-conforming const... yes
checking malloc.h presence... yes
yes
checking for malloc.h... yes
yes
checking for off_t... checking for alloca.h... checking stddef.h usability... no
checking for sys/pstat.h... yes
checking stddef.h presence... yes
checking for stddef.h... yes
no
checking for sys/sysmp.h... no
checking for sys/sysinfo.h... no
checking for stdlib.h... (cached) yes
checking for machine/hal_sysinfo.h... checking for string.h... (cached) yes
yes
checking size of int... no
checking for sys/table.h... checking for unistd.h... (cached) yes
checking for sys/param.h... (cached) yes
no
checking for feof_unlocked... checking for sys/sysctl.h... no
checking for sys/systemcfg.h... no
checking for stdint.h... (cached) yes
no
checking for stdio_ext.h... checking for fgets_unlocked... no
checking for process.h... yes
no
checking for getc_unlocked... checking for sys/prctl.h... no
checking for sys/wait.h that is POSIX.1 compatible... no
checking for getcwd... no
checking whether time.h and sys/time.h may both be included... yes
yes
checking whether errno must be declared... checking for getegid... no
checking size of int... no
checking for geteuid... no
4
checking size of long... checking for getgid... no
checking for getuid... no
checking for mempcpy... yes
checking for munmap... no
checking for putenv... yes
checking for setenv... config.status: creating Makefile
no
checking for setlocale... yes
checking for stpcpy... no
checking for strcasecmp... config.status: executing depfiles commands
yes
checking for strdup... yes
checking for strtoul... yes
checking for tsearch... 4
checking size of long... config.status: executing libtool commands
yes
checking for __argz_count... 4
checking for ANSI C header files... (cached) yes
checking build system type... no
x86_64-pc-linux-gnu
checking host system type... checking for __argz_stringify... x86_64-w64-mingw32
checking target system type... make[1]: Nothing to be done for 'all-target'.
x86_64-w64-mingw32
checking for decimal floating point... bid
checking whether byte ordering is bigendian... mkdir -p -- ./readline
Configuring in ./readline
no
checking for __argz_next... no
checking for __fsetlocking... no
configure: updating cache ./config.cache
no
checking for iconv... configure: creating ./config.status
no, consider installing GNU libiconv
checking for nl_langinfo and CODESET... no
checking for LC_MESSAGES... 4
checking size of size_t... config.status: creating Makefile
no
checking for bison... bison
checking version of bison... 3.0.4, ok
checking whether NLS is requested... yes
checking whether included gettext is requested... no
checking for GNU gettext in libc... no
config.status: creating config.h
checking for GNU gettext in libintl... config.status: executing gstdint.h commands
configure: creating cache ./config.cache
no
checking whether to use NLS... yes
checking where the gettext function comes from... included intl directory
checking for aclocal... aclocal
checking for autoconf... autoconf
checking for autoheader... autoheader
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-w64-mingw32

Beginning configuration for readline-6.2 for x86_64-w64-mingw32

checking whether make sets $(MAKE)... yes
checking for x86_64-w64-mingw32-gcc... x86_64-w64-mingw32-gcc
configure: updating cache ./config.cache
configure: creating ./config.status
make[2]: Entering directory '/home/gdb-buildbot/fedora-x86-64-1/fedora-x86-64-mingw32/build/zlib'
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-adler32.o -MD -MP -MF .deps/libz_a-adler32.Tpo -c -o libz_a-adler32.o `test -f 'adler32.c' || echo '../../binutils-gdb/zlib/'`adler32.c
checking whether the C compiler works... mv -f .deps/libz_a-adler32.Tpo .deps/libz_a-adler32.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-compress.o -MD -MP -MF .deps/libz_a-compress.Tpo -c -o libz_a-compress.o `test -f 'compress.c' || echo '../../binutils-gdb/zlib/'`compress.c
yes
checking for C compiler default output file name... a.exe
checking for suffix of executables... mv -f .deps/libz_a-compress.Tpo .deps/libz_a-compress.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-crc32.o -MD -MP -MF .deps/libz_a-crc32.Tpo -c -o libz_a-crc32.o `test -f 'crc32.c' || echo '../../binutils-gdb/zlib/'`crc32.c
.exe
checking whether we are cross compiling... yes
checking for suffix of object files... mv -f .deps/libz_a-crc32.Tpo .deps/libz_a-crc32.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-deflate.o -MD -MP -MF .deps/libz_a-deflate.Tpo -c -o libz_a-deflate.o `test -f 'deflate.c' || echo '../../binutils-gdb/zlib/'`deflate.c
o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-w64-mingw32-gcc accepts -g... config.status: creating Makefile
yes
checking for x86_64-w64-mingw32-gcc option to accept ISO C89... config.status: creating config.intl
8
checking for long long... mv -f .deps/libz_a-deflate.Tpo .deps/libz_a-deflate.Po
none needed
checking how to run the C preprocessor... config.status: creating config.h
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-gzread.o -MD -MP -MF .deps/libz_a-gzread.Tpo -c -o libz_a-gzread.o `test -f 'gzread.c' || echo '../../binutils-gdb/zlib/'`gzread.c
config.status: executing default-1 commands
x86_64-w64-mingw32-gcc -E
yes
checking size of long long... mv -f .deps/libz_a-gzread.Tpo .deps/libz_a-gzread.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-gzclose.o -MD -MP -MF .deps/libz_a-gzclose.Tpo -c -o libz_a-gzclose.o `test -f 'gzclose.c' || echo '../../binutils-gdb/zlib/'`gzclose.c
checking for grep that handles long lines and -e... make[2]: Entering directory '/home/gdb-buildbot/fedora-x86-64-1/fedora-x86-64-mingw32/build/etc'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/home/gdb-buildbot/fedora-x86-64-1/fedora-x86-64-mingw32/build/etc'
make[2]: Entering directory '/home/gdb-buildbot/fedora-x86-64-1/fedora-x86-64-mingw32/build/libdecnumber'
source='../../binutils-gdb/libdecnumber/decNumber.c' object='decNumber.o' libtool=no x86_64-w64-mingw32-gcc  -I../../binutils-gdb/libdecnumber -I.  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -Wcast-qual -pedantic -Wno-long-long  -fno-lto -I../../binutils-gdb/libdecnumber -I.   -c ../../binutils-gdb/libdecnumber/decNumber.c
/usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for ANSI C header files... mv -f .deps/libz_a-gzclose.Tpo .deps/libz_a-gzclose.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-gzwrite.o -MD -MP -MF .deps/libz_a-gzwrite.Tpo -c -o libz_a-gzwrite.o `test -f 'gzwrite.c' || echo '../../binutils-gdb/zlib/'`gzwrite.c
mv -f .deps/libz_a-gzwrite.Tpo .deps/libz_a-gzwrite.Po
yes
checking for sys/types.h... x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-gzlib.o -MD -MP -MF .deps/libz_a-gzlib.Tpo -c -o libz_a-gzlib.o `test -f 'gzlib.c' || echo '../../binutils-gdb/zlib/'`gzlib.c
yes
checking for sys/stat.h... yes
mv -f .deps/libz_a-gzlib.Tpo .deps/libz_a-gzlib.Po
checking for stdlib.h... x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-infback.o -MD -MP -MF .deps/libz_a-infback.Tpo -c -o libz_a-infback.o `test -f 'infback.c' || echo '../../binutils-gdb/zlib/'`infback.c
yes
checking for string.h... yes
mv -f .deps/libz_a-infback.Tpo .deps/libz_a-infback.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-inffast.o -MD -MP -MF .deps/libz_a-inffast.Tpo -c -o libz_a-inffast.o `test -f 'inffast.c' || echo '../../binutils-gdb/zlib/'`inffast.c
checking for memory.h... yes
mv -f .deps/libz_a-inffast.Tpo .deps/libz_a-inffast.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-inflate.o -MD -MP -MF .deps/libz_a-inflate.Tpo -c -o libz_a-inflate.o `test -f 'inflate.c' || echo '../../binutils-gdb/zlib/'`inflate.c
checking for strings.h... yes
checking for inttypes.h... 8
checking for a 64-bit type... mv -f .deps/libz_a-inflate.Tpo .deps/libz_a-inflate.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-inftrees.o -MD -MP -MF .deps/libz_a-inftrees.Tpo -c -o libz_a-inftrees.o `test -f 'inftrees.c' || echo '../../binutils-gdb/zlib/'`inftrees.c
yes
uint64_t
checking for intptr_t... checking for stdint.h... mv -f .deps/libz_a-inftrees.Tpo .deps/libz_a-inftrees.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-trees.o -MD -MP -MF .deps/libz_a-trees.Tpo -c -o libz_a-trees.o `test -f 'trees.c' || echo '../../binutils-gdb/zlib/'`trees.c
yes
checking for unistd.h... source='../../binutils-gdb/libdecnumber/decContext.c' object='decContext.o' libtool=no x86_64-w64-mingw32-gcc  -I../../binutils-gdb/libdecnumber -I.  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -Wcast-qual -pedantic -Wno-long-long  -fno-lto -I../../binutils-gdb/libdecnumber -I.   -c ../../binutils-gdb/libdecnumber/decContext.c
yes
checking for uintptr_t... yes
checking minix/config.h usability... source='../../binutils-gdb/libdecnumber/bid/decimal32.c' object='decimal32.o' libtool=no x86_64-w64-mingw32-gcc  -I../../binutils-gdb/libdecnumber -I.  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -Wcast-qual -pedantic -Wno-long-long  -fno-lto -I../../binutils-gdb/libdecnumber -I.   -c ../../binutils-gdb/libdecnumber/bid/decimal32.c
no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... mv -f .deps/libz_a-trees.Tpo .deps/libz_a-trees.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-uncompr.o -MD -MP -MF .deps/libz_a-uncompr.Tpo -c -o libz_a-uncompr.o `test -f 'uncompr.c' || echo '../../binutils-gdb/zlib/'`uncompr.c
yes
checking whether x86_64-w64-mingw32-gcc needs -traditional... no
checking for a BSD-compatible install... /usr/bin/install -c
checking for ar... x86_64-w64-mingw32-ar
checking for x86_64-w64-mingw32-ranlib... x86_64-w64-mingw32-ranlib
checking for an ANSI C-conforming const... mv -f .deps/libz_a-uncompr.Tpo .deps/libz_a-uncompr.Po
x86_64-w64-mingw32-gcc -DPACKAGE_NAME=\"zlib\" -DPACKAGE_TARNAME=\"zlib\" -DPACKAGE_VERSION=\"1.1.4\" -DPACKAGE_STRING=\"zlib\ 1.1.4\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DPACKAGE=\"zlib\" -DVERSION=\"1.1.4\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_STDLIB_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_PARAM_H=1 -DHAVE_GETPAGESIZE=1 -DHAVE_MEMCPY=1 -DHAVE_STRERROR=1 -DHAVE_UNISTD_H=1 -I. -I../../binutils-gdb/zlib      -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -MT libz_a-zutil.o -MD -MP -MF .deps/libz_a-zutil.Tpo -c -o libz_a-zutil.o `test -f 'zutil.c' || echo '../../binutils-gdb/zlib/'`zutil.c
source='../../binutils-gdb/libdecnumber/bid/decimal64.c' object='decimal64.o' libtool=no x86_64-w64-mingw32-gcc  -I../../binutils-gdb/libdecnumber -I.  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -Wcast-qual -pedantic -Wno-long-long  -fno-lto -I../../binutils-gdb/libdecnumber -I.   -c ../../binutils-gdb/libdecnumber/bid/decimal64.c
yes
checking for ssize_t... yes
checking for function prototypes... yes
checking whether char is unsigned... mv -f .deps/libz_a-zutil.Tpo .deps/libz_a-zutil.Po
rm -f libz.a
x86_64-w64-mingw32-ar cru libz.a libz_a-adler32.o libz_a-compress.o libz_a-crc32.o libz_a-deflate.o libz_a-gzread.o libz_a-gzclose.o libz_a-gzwrite.o libz_a-gzlib.o libz_a-infback.o libz_a-inffast.o libz_a-inflate.o libz_a-inftrees.o libz_a-trees.o libz_a-uncompr.o libz_a-zutil.o 
x86_64-w64-mingw32-ranlib libz.a
make[2]: Leaving directory '/home/gdb-buildbot/fedora-x86-64-1/fedora-x86-64-mingw32/build/zlib'
no
checking for working volatile... make[2]: Entering directory '/home/gdb-buildbot/fedora-x86-64-1/fedora-x86-64-mingw32/build/intl'
source='../../binutils-gdb/libdecnumber/bid/decimal128.c' object='decimal128.o' libtool=no x86_64-w64-mingw32-gcc  -I../../binutils-gdb/libdecnumber -I.  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -Wcast-qual -pedantic -Wno-long-long  -fno-lto -I../../binutils-gdb/libdecnumber -I.   -c ../../binutils-gdb/libdecnumber/bid/decimal128.c
rm -f stamp-h1
/bin/sh ./config.status config.h
yes
checking return type of signal handlers... yes
checking for pid_t... void
checking for size_t... source='../../binutils-gdb/libdecnumber/bid/bid2dpd_dpd2bid.c' object='bid2dpd_dpd2bid.o' libtool=no x86_64-w64-mingw32-gcc  -I../../binutils-gdb/libdecnumber -I.  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -Wcast-qual -pedantic -Wno-long-long  -fno-lto -I../../binutils-gdb/libdecnumber -I.   -c ../../binutils-gdb/libdecnumber/bid/bid2dpd_dpd2bid.c
config.status: creating config.h
config.status: config.h is unchanged
cp ../../binutils-gdb/intl/libgnuintl.h libintl.h
bison -y --name-prefix=__gettext --output plural.c ../../binutils-gdb/intl/plural.y
../../binutils-gdb/intl/plural.y:46.1-12: warning: deprecated directive, use %pure-parser [-Wdeprecated]
 %pure_parser
 ^^^^^^^^^^^^
yes
checking for library containing strerror... rm -f plural.h
test -f config.h || (rm -f stamp-h1 && make stamp-h1)
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/bindtextdom.c
yes
checking for ssize_t... none required
checking for asprintf... yes
checking for ANSI C header files... (cached) yes
checking whether stat file-mode macros are broken... yes
source='../../binutils-gdb/libdecnumber/bid/host-ieee32.c' object='host-ieee32.o' libtool=no x86_64-w64-mingw32-gcc  -I../../binutils-gdb/libdecnumber -I.  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -Wcast-qual -pedantic -Wno-long-long  -fno-lto -I../../binutils-gdb/libdecnumber -I.   -c ../../binutils-gdb/libdecnumber/bid/host-ieee32.c
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/dcgettext.c
no
checking for atexit... checking for dirent.h that defines DIR... source='../../binutils-gdb/libdecnumber/bid/host-ieee64.c' object='host-ieee64.o' libtool=no x86_64-w64-mingw32-gcc  -I../../binutils-gdb/libdecnumber -I.  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -Wcast-qual -pedantic -Wno-long-long  -fno-lto -I../../binutils-gdb/libdecnumber -I.   -c ../../binutils-gdb/libdecnumber/bid/host-ieee64.c
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/dgettext.c
yes
checking for library containing opendir... x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/gettext.c
source='../../binutils-gdb/libdecnumber/bid/host-ieee128.c' object='host-ieee128.o' libtool=no x86_64-w64-mingw32-gcc  -I../../binutils-gdb/libdecnumber -I.  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wold-style-definition -Wmissing-format-attribute -Wcast-qual -pedantic -Wno-long-long  -fno-lto -I../../binutils-gdb/libdecnumber -I.   -c ../../binutils-gdb/libdecnumber/bid/host-ieee128.c
yes
none required
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/finddomain.c
checking for fcntl... rm -f libdecnumber.a
x86_64-w64-mingw32-ar cru libdecnumber.a decNumber.o decContext.o decimal32.o decimal64.o decimal128.o bid2dpd_dpd2bid.o host-ieee32.o host-ieee64.o host-ieee128.o
x86_64-w64-mingw32-ranlib libdecnumber.a
checking for basename... make[2]: Leaving directory '/home/gdb-buildbot/fedora-x86-64-1/fedora-x86-64-mingw32/build/libdecnumber'
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/loadmsgcat.c
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H -DLOCALE_ALIAS_PATH="\"/usr/local/share/locale\"" -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/localealias.c
yes
no
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/textdomain.c
checking for kill... checking for bcmp... x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/l10nflist.c
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/explodename.c
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H -DLOCALEDIR="\"/usr/local/share/locale\"" -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/dcigettext.c
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/dcngettext.c
no
checking for lstat... no
checking for bcopy... x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/dngettext.c
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/ngettext.c
no
checking for memmove... x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl plural.c
x86_64-w64-mingw32-gcc -c  -g -D_GLIBCXX_DEBUG  -D__USE_MINGW_ACCESS -DHAVE_CONFIG_H  -I. -I../../binutils-gdb/intl ../../binutils-gdb/intl/plural-exp.c
In file included from ../../binutils-gdb/intl/plural.y:35:0:
../../binutils-gdb/intl/plural-exp.h:102:23: error: conflicting types for 'libintl_gettextparse'
 # define PLURAL_PARSE libintl_gettextparse
                       ^
../../binutils-gdb/intl/plural.y:40:25: note: in expansion of macro 'PLURAL_PARSE'
 # define __gettextparse PLURAL_PARSE
                         ^~~~~~~~~~~~
plural.c:184:5: note: in expansion of macro '__gettextparse'
 int __gettextparse (void);
     ^~~~~~~~~~~~~~
../../binutils-gdb/intl/plural-exp.h:102:23: note: previous declaration of 'libintl_gettextparse' was here
 # define PLURAL_PARSE libintl_gettextparse
                       ^
../../binutils-gdb/intl/plural-exp.h:114:12: note: in expansion of macro 'PLURAL_PARSE'
 extern int PLURAL_PARSE PARAMS ((void *arg));
            ^~~~~~~~~~~~
../../binutils-gdb/intl/plural-exp.h:102:23: error: conflicting types for 'libintl_gettextparse'
 # define PLURAL_PARSE libintl_gettextparse
                       ^
../../binutils-gdb/intl/plural.y:40:25: note: in expansion of macro 'PLURAL_PARSE'
 # define __gettextparse PLURAL_PARSE
                         ^~~~~~~~~~~~
plural.c:63:25: note: in expansion of macro '__gettextparse'
 #define yyparse         __gettextparse
                         ^~~~~~~~~~~~~~
plural.c:1129:1: note: in expansion of macro 'yyparse'
 yyparse (void)
 ^~~~~~~
../../binutils-gdb/intl/plural-exp.h:102:23: note: previous declaration of 'libintl_gettextparse' was here
 # define PLURAL_PARSE libintl_gettextparse
                       ^
../../binutils-gdb/intl/plural-exp.h:114:12: note: in expansion of macro 'PLURAL_PARSE'
 extern int PLURAL_PARSE PARAMS ((void *arg));
            ^~~~~~~~~~~~
plural.c: In function 'libintl_gettextparse':
plural.c:64:25: error: too few arguments to function '__gettextlex'
 #define yylex           __gettextlex
                         ^
plural.c:1298:16: note: in expansion of macro 'yylex'
       yychar = yylex (&yylval);
                ^~~~~
plural.c:64:25: note: declared here
 #define yylex           __gettextlex
                         ^
../../binutils-gdb/intl/plural.y:69:12: note: in expansion of macro 'yylex'
 static int yylex PARAMS ((YYSTYPE *lval, const char **pexp));
            ^~~~~
../../binutils-gdb/intl/plural.y:178:29: error: 'arg' undeclared (first use in this function)
      ((struct parse_args *) arg)->res = $1;
                             ^~~
../../binutils-gdb/intl/plural.y:178:29: note: each undeclared identifier is reported only once for each function it appears in
make[2]: *** [Makefile:133: plural.o] Error 1
make[2]: *** Waiting for unfinished jobs....
no
checking for bsearch... make[2]: Leaving directory '/home/gdb-buildbot/fedora-x86-64-1/fedora-x86-64-mingw32/build/intl'
make[1]: *** [Makefile:5599: all-intl] Error 2
make[1]: *** Waiting for unfinished jobs....
yes
checking for putenv... yes
checking for bzero... yes
checking for select... no
no
checking for calloc... checking for setenv... yes
no
checking for setlocale... checking for clock... yes
yes
checking for strcasecmp... checking for ffs... no
yes
checking for getcwd... checking for strpbrk... yes
yes
checking for getpagesize... checking for tcgetattr... yes
checking for gettimeofday... no
checking for vsnprintf... yes
checking for index... yes
checking for isascii... no
yes
checking for insque... checking for isxdigit... no
checking for memchr... yes
checking for getpwent... yes
checking for memcmp... no
checking for getpwnam... yes
checking for memcpy... no
checking for getpwuid... yes
checking for memmem... no
checking for working strcoll... no
checking fcntl.h usability... no
checking for memmove... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking for unistd.h... (cached) yes
checking for stdlib.h... (cached) yes
yes
checking varargs.h usability... checking for mempcpy... no
checking varargs.h presence... no
checking for varargs.h... no
yes
checking stdarg.h usability... checking for memset... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for mkstemps... checking limits.h usability... no
checking for putenv... yes
checking limits.h presence... yes
checking for limits.h... yes
checking locale.h usability... yes
checking for random... yes
checking locale.h presence... yes
checking for locale.h... yes
checking pwd.h usability... no
checking for rename... no
checking pwd.h presence... yes
no
checking for pwd.h... no
checking for memory.h... (cached) yes
checking for rindex... checking termcap.h usability... no
checking for setenv... yes
checking termcap.h presence... yes
checking for termcap.h... yes
checking termios.h usability... no
checking for snprintf... no
checking termios.h presence... yes
no
checking for termios.h... no
checking termio.h usability... checking for sigsetmask... no
checking termio.h presence... no
no
checking for termio.h... no
checking sys/pte.h usability... checking for stpcpy... no
checking sys/pte.h presence... no
checking for stpncpy... no
checking for sys/pte.h... no
checking sys/stream.h usability... no
checking for strcasecmp... yes
no
checking sys/stream.h presence... checking for strchr... no
checking for sys/stream.h... no
checking sys/select.h usability... yes
no
checking sys/select.h presence... checking for strdup... no
checking for sys/select.h... no
checking sys/file.h usability... yes
checking for strncasecmp... yes
yes
checking sys/file.h presence... yes
checking for sys/file.h... yes
checking for strndup... checking for sys/ptem.h... no
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking for type of signal functions... no
checking for strnlen... yes
checking for strrchr... yes
checking for strstr... v7
checking if signal handlers must be reinstalled when invoked... no
checking for presence of POSIX-style sigsetjmp/siglongjmp... missing
checking for lstat... configure: WARNING: cannot check signal handling if cross compiling -- defaulting to no
configure: WARNING: cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing
no
checking whether or not strcoll and strcmp differ... no
checking whether the ctype macros accept non-ascii characters... no
checking whether getpw functions are declared in pwd.h... configure: WARNING: cannot check strcoll if cross compiling -- defaulting to no
configure: WARNING: cannot check ctype macros if cross compiling -- defaulting to no
no
checking whether termios.h defines TIOCGWINSZ... no
checking whether sys/ioctl.h defines TIOCGWINSZ... no
checking for sig_atomic_t in signal.h... yes
checking for strtod... yes
checking whether signal handlers are of type void... yes
yes
checking for TIOCSTAT in sys/ioctl.h... checking for strtol... no
checking for FIONREAD in sys/ioctl.h... yes
checking for strtoul... no
checking for speed_t in sys/types.h... yes
no
checking for struct winsize in sys/ioctl.h and termios.h... checking for strtoll... yes
not found
checking for struct dirent.d_ino... checking for strtoull... yes
checking for struct dirent.d_fileno... yes
checking for strverscmp... no
checking for tgetent... no
checking for tmpnam... no
checking for tgetent in -ltermcap... yes
yes
checking which library has the termcap functions... using libtermcap
checking wctype.h usability... checking for vasprintf... yes
checking wctype.h presence... yes
checking for wctype.h... yes
checking wchar.h usability... yes
checking wchar.h presence... yes
checking for wchar.h... yes
checking langinfo.h usability... yes
checking for vfprintf... no
checking langinfo.h presence... no
checking for langinfo.h... no
checking for mbrlen... yes
checking for vprintf... yes
checking for mbscasecmp... yes
checking for vsnprintf... no
checking for mbscmp... no
checking for mbsnrtowcs... yes
checking for vsprintf... no
checking for mbsrtowcs... yes
checking for waitpid... yes
checking for mbschr... no
checking for setproctitle... no
checking for wcrtomb... no
checking whether alloca needs Cray hooks... no
checking stack direction for C alloca... 0
yes
checking for wcscoll... checking for vfork.h... no
checking for fork... yes
checking for wcsdup... no
checking for vfork... yes
checking for wcwidth... no
checking for _doprnt... no
checking for wctype... no
checking for sys_errlist... (cached) yes
checking for sys_nerr... (cached) yes
checking for sys_siglist... yes
checking for wcswidth... no
checking for external symbol _system_configuration... no
checking for __fsetlocking... no
checking whether mbrtowc and mbstate_t are properly declared... no
checking for canonicalize_file_name... yes
checking for iswlower... no
checking for dup3... yes
checking for iswupper... no
checking for getrlimit... yes
checking for towlower... no
checking for getrusage... no
yes
checking for getsysinfo... checking for towupper... no
checking for gettimeofday... (cached) yes
yes
checking for on_exit... checking for iswctype... no
checking for psignal... yes
no
checking for nl_langinfo and CODESET... checking for pstat_getdynamic... no
checking for wchar_t in wchar.h... yes
checking for wctype_t in wctype.h... no
checking for pstat_getstatic... yes
checking for wint_t in wctype.h... yes
checking configuration for building shared libraries... no
checking for realpath... supported
configure: updating cache ./config.cache
no
configure: creating ./config.status
checking for setrlimit... no
checking for sbrk... no
checking for spawnve... yes
checking for spawnvpe... yes
config.status: creating Makefile
checking for strerror... config.status: creating doc/Makefile
yes
checking for strsignal... config.status: creating examples/Makefile
no
checking for sysconf... config.status: creating shlib/Makefile
no
checking for sysctl... config.status: creating config.h
no
checking for sysmp... config.status: executing default commands
no
checking for table... no
checking for times... no
checking for wait3... no
checking for wait4... no
checking whether basename is declared... no
checking whether ffs is declared... no
checking whether asprintf is declared... yes
checking whether vasprintf is declared... yes
checking whether snprintf is declared... yes
checking whether vsnprintf is declared... yes
checking whether calloc is declared... yes
checking whether getenv is declared... yes
checking whether getopt is declared... yes
checking whether malloc is declared... yes
checking whether realloc is declared... yes
checking whether sbrk is declared... no
checking whether strtol is declared... yes
checking whether strtoul is declared... yes
checking whether strtoll is declared... yes
checking whether strtoull is declared... yes
checking whether strverscmp is declared... no
checking whether strnlen is declared... yes
checking whether canonicalize_file_name must be declared... yes
checking for stdlib.h... (cached) yes
checking for unistd.h... (cached) yes
checking for sys/param.h... (cached) yes
checking for getpagesize... (cached) yes
checking for working mmap... no
checking for working strncmp... yes
configure: updating cache ./config.cache
configure: creating ./config.status
config.status: creating Makefile
config.status: creating testsuite/Makefile
config.status: creating config.h
config.status: executing default commands
make[1]: Leaving directory '/home/gdb-buildbot/fedora-x86-64-1/fedora-x86-64-mingw32/build'
make: *** [Makefile:857: all] Error 2
============================

Failures on Fedora-x86_64-native-extended-gdbserver-m32, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-3

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-extended-gdbserver-m32/builds/10038>

Commit(s) tested:
	a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove traces of h8300 ecoff support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-extended-gdbserver-m32/a6/a6f88f6e4458e672b8a72ee0c0998fdc79cf601e/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-native-extended-gdbserver-m32/xfails/master/xfail?id=4806a92>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-native-extended-gdbserver-m32/xfails/master/xfail.table?id=4806a92>

Failures on Fedora-x86_64-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-m64/builds/10327>

Commit(s) tested:
	a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove traces of h8300 ecoff support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-m64/a6/a6f88f6e4458e672b8a72ee0c0998fdc79cf601e/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-m64/xfails/master/xfail?id=f081f05>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-m64/xfails/master/xfail.table?id=f081f05>

Failures on Fedora-x86_64-native-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	fedora-x86-64-2

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Fedora-x86_64-native-gdbserver-m64/builds/10261>

Commit(s) tested:
	a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove traces of h8300 ecoff support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Fedora-x86_64-native-gdbserver-m64/a6/a6f88f6e4458e672b8a72ee0c0998fdc79cf601e/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=0: inferior 1 exited
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-native-gdbserver-m64/xfails/master/xfail?id=7619521>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Fedora-x86_64-native-gdbserver-m64/xfails/master/xfail.table?id=7619521>

Failures on Debian-s390x-native-gdbserver-m64, branch master

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-native-gdbserver-m64/builds/5900>

Commit(s) tested:
	a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove traces of h8300 ecoff support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-native-gdbserver-m64/a6/a6f88f6e4458e672b8a72ee0c0998fdc79cf601e/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=off: cond_bp_target=0: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Debian-s390x-native-gdbserver-m64/xfails/master/xfail?id=ec38fd3>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Debian-s390x-native-gdbserver-m64/xfails/master/xfail.table?id=ec38fd3>

Failures on Debian-s390x-m64, branch master

[sergiodj+buildbot]

Buildslave:
	debian-jessie-s390x-1

Full Build URL:
	<http://gdb-build.sergiodj.net/builders/Debian-s390x-m64/builds/5855>

Commit(s) tested:
	a6f88f6e4458e672b8a72ee0c0998fdc79cf601e

Author(s) (in the same order as the commits):
	Pedro Alves <palves@redhat.com>

Subject:
	gdb: Remove traces of h8300 ecoff support

Testsuite log (gdb.sum and gdb.log) URL(s):
	<http://gdb-build.sergiodj.net/results/Debian-s390x-m64/a6/a6f88f6e4458e672b8a72ee0c0998fdc79cf601e/>

*** Diff to previous build ***
============================
PASS -> KFAIL: gdb.threads/process-dies-while-handling-bp.exp: non_stop=on: cond_bp_target=1: inferior 1 exited
============================


*** Complete list of XFAILs for this builder ***

To obtain the list of XFAIL tests for this builder, go to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Debian-s390x-m64/xfails/master/xfail?id=c54a918>

You can also see a pretty-printed version of the list, with more information
about each XFAIL, by going to:

	<https://git.sergiodj.net/gdb-xfails.git/tree/xfails/Debian-s390x-m64/xfails/master/xfail.table?id=c54a918>