* Re: Can't get GDB to connect to target
@ 2000-06-26 14:18 Gerwyn Davies
0 siblings, 0 replies; 4+ messages in thread
From: Gerwyn Davies @ 2000-06-26 14:18 UTC (permalink / raw)
To: GDB
I'm running GDB from a BASH shell on a Windows 98 platform. The version and
configuration of GDB is:-
>GNU gdb 4.17-gnupro-98r2
>This GDB was configured as
"--host=i586-pc-cygwin32 --target=mips-tx39-elf".
This version was supplied to me along with the demo board that I'm trying to
connect to. I assume I was given a good working setup. I've also compiled a
version 5 build of GDB which showed a similar problem.
I'm also reasonably sure my monitor is all OK. If I connect to it using a
terminal emulator, I can stimulate the transmission of GBD protocol packets.
There must be some diagnostics available from GDB somewhere.
I've never used these GNU tools before, so I expect to encounter some very
fundamental problems most likey caused by my errors.
Many thanks.
-----Original Message-----
From: Eli Zaretskii <eliz@delorie.com>
To: gerwynd@tommoll.freeserve.co.uk <gerwynd@tommoll.freeserve.co.uk>
Cc: gdb@sourceware.cygnus.com <gdb@sourceware.cygnus.com>
Date: 26 June 2000 06:38
Subject: Re: Can't get GDB to connect to target
>> From: "Gerwyn Davies" <gerwynd@tommoll.freeserve.co.uk>
>> Date: Sun, 25 Jun 2000 22:18:09 +0100
>>
>> I cannot get GDB to connect to my remote taget.
>>
>> I get a message 'Remote debugging using com1', and thats it, GDB has
>> locked up.
>
>You don't say what version of GDB and on what platform did you try
>this. `com1' implies the MS-DOS (a.k.a. DJGPP) port of GDB. Is that
>true?
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Can't get GDB to connect to target
@ 2000-06-27 1:10 Nicolas.Thery
0 siblings, 0 replies; 4+ messages in thread
From: Nicolas.Thery @ 2000-06-27 1:10 UTC (permalink / raw)
To: Gerwyn Davies; +Cc: GDB
"Gerwyn Davies" <gerwynd@tommoll.freeserve.co.uk> wrote:
>
> I'm running GDB from a BASH shell on a Windows 98 platform. The version
and
> configuration of GDB is:-
>
> >GNU gdb 4.17-gnupro-98r2
> >This GDB was configured as
> "--host=i586-pc-cygwin32 --target=mips-tx39-elf".
>
> This version was supplied to me along with the demo board that I'm trying
to
> connect to. I assume I was given a good working setup. I've also compiled
a
> version 5 build of GDB which showed a similar problem.
>
> I'm also reasonably sure my monitor is all OK. If I connect to it using
a
> terminal emulator, I can stimulate the transmission of GBD protocol
packets.
>
> There must be some diagnostics available from GDB somewhere.
Enter "set remotedebug 1" before "target remote com1".
This will dump to the screen sent and received packets.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Can't get GDB to connect to target
2000-06-25 14:18 Gerwyn Davies
@ 2000-06-25 22:38 ` Eli Zaretskii
0 siblings, 0 replies; 4+ messages in thread
From: Eli Zaretskii @ 2000-06-25 22:38 UTC (permalink / raw)
To: gerwynd; +Cc: gdb
> From: "Gerwyn Davies" <gerwynd@tommoll.freeserve.co.uk>
> Date: Sun, 25 Jun 2000 22:18:09 +0100
>
> I cannot get GDB to connect to my remote taget.
>
> I get a message 'Remote debugging using com1', and thats it, GDB has
> locked up.
You don't say what version of GDB and on what platform did you try
this. `com1' implies the MS-DOS (a.k.a. DJGPP) port of GDB. Is that
true?
^ permalink raw reply [flat|nested] 4+ messages in thread
* Can't get GDB to connect to target
@ 2000-06-25 14:18 Gerwyn Davies
2000-06-25 22:38 ` Eli Zaretskii
0 siblings, 1 reply; 4+ messages in thread
From: Gerwyn Davies @ 2000-06-25 14:18 UTC (permalink / raw)
To: GDB
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 222 bytes --]
I cannot get GDB to connect to my remote
taget.
Â
I get a message 'Remote debugging using com1',
and thats it, GDB has locked up.
Â
Is there any debug information that I can get
out from GDB?
Â
Gerwyn
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2000-06-27 1:10 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-06-26 14:18 Can't get GDB to connect to target Gerwyn Davies
-- strict thread matches above, loose matches on Subject: below --
2000-06-27 1:10 Nicolas.Thery
2000-06-25 14:18 Gerwyn Davies
2000-06-25 22:38 ` Eli Zaretskii
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).