* GDB "asserts" after "next"ing through a remote stub
@ 2020-03-04 21:16 Shahab Vahedi
2020-03-09 21:10 ` Simon Marchi
0 siblings, 1 reply; 3+ messages in thread
From: Shahab Vahedi @ 2020-03-04 21:16 UTC (permalink / raw)
To: gdb
I am having difficulties in using GDB [1] that is connected to a remote
stub [2]. An older version of GDB (v8.0) runs smoothly against this
stub. The problem manifests itself as:
,--------------------------------------------------------------------.
| gdb> target remote :1234 # connects OK and gets the PC address |
| gdb> next # it will go berserk |
| |
| /gdb/inferior.c:279: internal-error: inferior* |
| find_inferior_pid(process_stratum_target*, int): Assertion |
| 'pid != 0' failed. |
| A problem internal to GDB has been detected, |
| further debugging may prove unreliable. |
`--------------------------------------------------------------------'
I have added the logging for both working [3] and non-working [4]
versions at the end of this e-mail.
The problem in current GDB [1] seems to be about "do_target_wait()"
clearing a global variable "inferior_ptid" and then later looking into
one of its field (m_ptid) without setting it to anything:
,--------------------------------------------------------------------.
| infrun.c:do_target_wait() |
| { |
| ... |
| // the introduced lambda that wasn't in GDB 8.0 |
| auto do_wait = [&] (inferior *inf) |
| { |
| // this will set "inferior_ptid" to "null_ptid" |
| switch_to_inferior_no_thread (inf); |
| |
| // eventually, will cause the assert to be triggered |
| ... do_target_wait_1 (inf, wait_ptid, &ecs->ws, options); |
| }; |
| ... |
| // the lambda in motion |
| int inf_num = selected->num; |
| for (inferior *inf = selected; inf != NULL; inf = inf->next) |
| if (inferior_matches (inf)) |
| if (do_wait (inf)) // BOOM! |
| ... |
| } |
`--------------------------------------------------------------------'
From a call stack point of view, deep down in "do_target_wait_1()":
,--------------------------------------------------------------------.
| do_target_wait_1() |
| ... |
| remote_target::wait_as() // process "S05" packet |
| process_stop_reply() // sets "ptid" to "inferior_ptid" |
| remote_notice_new_inferior() |
| find_thread_ptid() // ASSERTS |
`--------------------------------------------------------------------'
To put it all together:
1. do_wait lambda invokes switch_to_inferior_no_thread() that sets
"inferior_ptid" to "null_ptid".
2. do_wait invokes do_target_wait_1()
3. process_stop_reply() inside do_target_wait_1() will set "ptid" to
"inferior_ptid" which holds no value.
4. find_thread_ptid() down the road looks into this "ptid" and asserts.
I do not know what is causing this. Should the remote stub send a packet
as such to have "inferior_ptid" set agian? Or is this a bug in GDB?
I appreciate any thought on this. For the record, this issue along the
reproducible steps are also filed on SNPS's github [5].
Cheers,
--
Shahab
[1]
The GDB I use is the one from master branch with its HEAD at c7adb09f35a
(Fix typo in gdb/testsuite/ChangeLog).
[2]
This stub is NOT gdbserver, but a proprietary simulator for ARC.
[3] working log ("set debug remote 1" and "set debug infrun 1")
infrun: clear_proceed_status_thread (Remote target)
infrun: proceed (addr=0xffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Remote target] at 0x100
Sending packet: $vCont?#49...Packet received:
Packet vCont (verbose-resume) is NOT supported
Sending packet: $Hc0#db...Packet received: OK
Sending packet: $s#73...infrun: infrun_async(1)
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [Thread 0],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
Packet received: S05
infrun: target_wait (-1.0.0, status) =
infrun: 42000.0.0 [Remote target],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: TARGET_WAITKIND_STOPPED
Sending packet: $g#67...Packet received: 00000080000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000f8ffff03000000000000000000000000000000000801000008010000000000000000000001000000500100000000400000000000000000000000000000000000xxxxxxxx0000000000000000020000000000000010000000020100000602020003000000030000000200000003030000055b88010274c4220120000e0000000000000000000000000000000000000000
infrun: stop_pc = 0x108
Sending packet: $m100,40#8e...Packet received: 0a20800f00800000001e417000f00800f907cfff0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
infrun: stepped to a different line
infrun: stop_waiting
Sending packet: $qL1200000000000000000#50...Packet received:
infrun: infrun_async(0)
[4] non-working log ("set debug remote 1" and "set debug infrun 1")
infrun: clear_proceed_status_thread (Remote target)
infrun: proceed (addr=0xffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: resume (step=1, signal=GDB_SIGNAL_0), trap_expected=0, current thread [Remote target] at 0x100
Sending packet: $vCont?#49...Packet received:
Packet vCont (verbose-resume) is NOT supported
Sending packet: $Hc0#db...Packet received: OK
Sending packet: $s#73...infrun: infrun_async(1)
infrun: prepare_to_wait
Packet received: S05
infrun: infrun_async(0)
infrun: infrun_async(1)
This is a bug, please report it. For instructions, see:
<http://www.gnu.org/software/gdb/bugs/>.
infrun: infrun_async(0)
infrun: infrun_async(1)
[5]
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/239
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: GDB "asserts" after "next"ing through a remote stub
2020-03-04 21:16 GDB "asserts" after "next"ing through a remote stub Shahab Vahedi
@ 2020-03-09 21:10 ` Simon Marchi
2020-03-10 12:30 ` Shahab Vahedi
0 siblings, 1 reply; 3+ messages in thread
From: Simon Marchi @ 2020-03-09 21:10 UTC (permalink / raw)
To: Shahab Vahedi, gdb
On 2020-03-04 4:15 p.m., Shahab Vahedi wrote:
> I am having difficulties in using GDB [1] that is connected to a remote
> stub [2]. An older version of GDB (v8.0) runs smoothly against this
> stub. The problem manifests itself as:
Hi Shahab,
I don't have much time to look into this, but it sounds related to this patch
series here:
https://sourceware.org/legacy-ml/gdb-patches/2020-03/msg00015.html
Simon
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: GDB "asserts" after "next"ing through a remote stub
2020-03-09 21:10 ` Simon Marchi
@ 2020-03-10 12:30 ` Shahab Vahedi
0 siblings, 0 replies; 3+ messages in thread
From: Shahab Vahedi @ 2020-03-10 12:30 UTC (permalink / raw)
To: Simon Marchi, Shahab Vahedi, gdb
On 3/9/20 10:10 PM, Simon Marchi wrote:
> Hi Shahab,
>
> I don't have much time to look into this, but it sounds related to
> this patch series here:
>
> https://sourceware.org/legacy-ml/gdb-patches/2020-03/msg00015.html
>
> Simon
>
Hi Simon,
Indeed, that patch [1] resolves the issue. Thank you for bringing it
into my attention.
--
Shahab
[1] gdb/remote: Restore support for 'S' stop reply packet
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=24ed6739b69
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-03-10 12:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-04 21:16 GDB "asserts" after "next"ing through a remote stub Shahab Vahedi
2020-03-09 21:10 ` Simon Marchi
2020-03-10 12:30 ` Shahab Vahedi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).