* git access
@ 2020-05-27 21:31 Jonny Grant
2020-05-27 21:36 ` Christian Biesinger
0 siblings, 1 reply; 6+ messages in thread
From: Jonny Grant @ 2020-05-27 21:31 UTC (permalink / raw)
To: gdb
Hello
Just looking here https://www.gnu.org/software/gdb/
Unfortunately git fails because I don't have a publickey for sourceware.org
Is this also suitable?
https://github.com/bminor/binutils-gdb
$ git clone --branch gdb-9-branch ssh://sourceware.org/git/binutils-gdb.git
Cloning into 'binutils-gdb'...
The authenticity of host 'sourceware.org (8.43.85.97)' can't be established.
ECDSA key fingerprint is SHA256:4bqfulMjMg7/L/38MJBw7mVMMu6EH+3MgMitrCRdFho.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'sourceware.org,8.43.85.97' (ECDSA) to the list of known hosts.
jonny@sourceware.org: Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Thanks
Jonny
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: git access
2020-05-27 21:31 git access Jonny Grant
@ 2020-05-27 21:36 ` Christian Biesinger
2020-05-27 21:44 ` Jonny Grant
0 siblings, 1 reply; 6+ messages in thread
From: Christian Biesinger @ 2020-05-27 21:36 UTC (permalink / raw)
To: Jonny Grant; +Cc: gdb
On Wed, May 27, 2020 at 4:31 PM Jonny Grant <jg@jguk.org> wrote:
>
> Hello
>
> Just looking here https://www.gnu.org/software/gdb/
>
>
> Unfortunately git fails because I don't have a publickey for sourceware.org
Did you try:
git clone git://sourceware.org/git/binutils-gdb.git
> Is this also suitable?
> https://github.com/bminor/binutils-gdb
I mean that's somebody's unofficial mirror. If you find them
trustworthy enough then sure. It does seem to be regularly updated.
Christian
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: git access
2020-05-27 21:36 ` Christian Biesinger
@ 2020-05-27 21:44 ` Jonny Grant
2020-05-27 21:58 ` Paul Smith
2020-05-28 17:04 ` Christian Biesinger
0 siblings, 2 replies; 6+ messages in thread
From: Jonny Grant @ 2020-05-27 21:44 UTC (permalink / raw)
To: Christian Biesinger; +Cc: gdb
On 27/05/2020 22:36, Christian Biesinger wrote:
> On Wed, May 27, 2020 at 4:31 PM Jonny Grant <jg@jguk.org> wrote:
>>
>> Hello
>>
>> Just looking here https://www.gnu.org/software/gdb/
>>
>>
>> Unfortunately git fails because I don't have a publickey for sourceware.org
>
> Did you try:
>
> git clone git://sourceware.org/git/binutils-gdb.git
Great, that one works. Could that be added to the web page?
Many thanks
Jonny
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: git access
2020-05-27 21:44 ` Jonny Grant
@ 2020-05-27 21:58 ` Paul Smith
2020-05-28 17:04 ` Christian Biesinger
1 sibling, 0 replies; 6+ messages in thread
From: Paul Smith @ 2020-05-27 21:58 UTC (permalink / raw)
To: Jonny Grant, Christian Biesinger; +Cc: gdb
On Wed, 2020-05-27 at 22:44 +0100, Jonny Grant wrote:
> > Did you try:
> >
> > git clone git://sourceware.org/git/binutils-gdb.git
>
> Great, that one works. Could that be added to the web page?
Not sure where you were looking; it's there:
https://www.gnu.org/software/gdb/current/
First bullet:
* Read-only git:
You can check out a copy of the git repository directly using the
command:
git clone git://sourceware.org/git/binutils-gdb.git
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: git access
2020-05-27 21:44 ` Jonny Grant
2020-05-27 21:58 ` Paul Smith
@ 2020-05-28 17:04 ` Christian Biesinger
2020-05-28 18:17 ` Joel Brobecker
1 sibling, 1 reply; 6+ messages in thread
From: Christian Biesinger @ 2020-05-28 17:04 UTC (permalink / raw)
To: Jonny Grant, Joel Brobecker; +Cc: gdb
On Wed, May 27, 2020 at 4:44 PM Jonny Grant <jg@jguk.org> wrote:
> On 27/05/2020 22:36, Christian Biesinger wrote:
> > On Wed, May 27, 2020 at 4:31 PM Jonny Grant <jg@jguk.org> wrote:
> >>
> >> Hello
> >>
> >> Just looking here https://www.gnu.org/software/gdb/
> >>
> >>
> >> Unfortunately git fails because I don't have a publickey for sourceware.org
> >
> > Did you try:
> >
> > git clone git://sourceware.org/git/binutils-gdb.git
>
> Great, that one works. Could that be added to the web page?
Hmm yeah, I see that the "GDB 9 branch created" announcement near the
bottom of https://www.gnu.org/software/gdb/ does only link to the SSH
version. Joel, maybe that should be changed?
Christian
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: git access
2020-05-28 17:04 ` Christian Biesinger
@ 2020-05-28 18:17 ` Joel Brobecker
0 siblings, 0 replies; 6+ messages in thread
From: Joel Brobecker @ 2020-05-28 18:17 UTC (permalink / raw)
To: Christian Biesinger; +Cc: Jonny Grant, gdb
> > > Did you try:
> > >
> > > git clone git://sourceware.org/git/binutils-gdb.git
> >
> > Great, that one works. Could that be added to the web page?
>
> Hmm yeah, I see that the "GDB 9 branch created" announcement near the
> bottom of https://www.gnu.org/software/gdb/ does only link to the SSH
> version. Joel, maybe that should be changed?
Sure thing. I suppose people who have a sourceware account already
would probably have a full clone already, so they typically wouldn't
use the sugested command to create a new clone.
Changed.
--
Joel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-05-28 18:17 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-05-27 21:31 git access Jonny Grant
2020-05-27 21:36 ` Christian Biesinger
2020-05-27 21:44 ` Jonny Grant
2020-05-27 21:58 ` Paul Smith
2020-05-28 17:04 ` Christian Biesinger
2020-05-28 18:17 ` Joel Brobecker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).