From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fernando Nasser To: danish iftikhar Cc: mleibowi@crystal.cirrus.com, gdb@sourceware.cygnus.com Subject: Re: Jeeni & ARM720T with GDB Date: Tue, 21 Nov 2000 09:36:00 -0000 Message-id: <3A1AB2B1.14521C4E@cygnus.com> References: X-SW-Source: 2000-11/msg00221.html danish iftikhar wrote: > > Well , i tried to use the above commands and was able to download > successfully . But after i set break point and do continue , everything > seems to hang . > Any guesses what is going wrong now . > the rdiromatzero command for EP7211 board should be set at 0 or 1 ?? > i am using insight 5.0 . > > do we need to specifically download some program for reset and all those > things which Grant has told . > I don't have a Jeeni target, so Grant is the person who can help you with that. I would try "set rdiromatzero true" as it is a quick test. Another thing you can do is to turn on Grant's RDI trace facility: Something like maintenance rdilogfile /dev/tty maintenance rdilogenable on Would print the message exchange between GDB and the target. Do this after the load or you will have too many messages! BTW, your program may have been linked with the wrong load address. What is the value of the PC (P/x $pc) after the load? -- Fernando Nasser Red Hat - Toronto E-Mail: fnasser@redhat.com 2323 Yonge Street, Suite #300 Toronto, Ontario M4P 2C9