RE: insight/328: Remote debugging - register window does not get updated after download

["Arpa Monika" <Monika.Arpa@austriamicrosystems.com>]

The following reply was made to PR insight/328; it has been noted by GNATS.

From: "Arpa Monika" <Monika.Arpa@austriamicrosystems.com>
To: <kseitz@sources.redhat.com>, <insight-prs@sources.redhat.com>,
   "Arpa Monika" <Monika.Arpa@austriamicrosystems.com>,
   <nobody@sources.redhat.com>, <insight-gnats@sources.redhat.com>
Cc:  
Subject: RE: insight/328: Remote debugging - register window does not get updated after download
Date: Thu, 21 Feb 2008 11:34:12 +0100

 Hello!
 
 1. I am opening my "axf"-File in the debugger ("File" Menu). =20
 2. I use the "Run" Menu entry "Connect to target" to establish the
 connection.=20
 3. I use the "Run" Menu entry "Download" to load the file to the
 arm-processor.
 
 Than I see that my windows are not updated. Neither is the
 register-window updated nor is the appropriate source file loaded, nor
 is the correct line highlighed as the program-counter position. All
 windows show the state after I called "Connect to target". Connect to
 target works correct, it reads all values from the target and updates
 its windows.
 
 If you need further information please let me know. I would be very glad
 if you could provide me with a fix for the problem.
 
 Thanks,
 Monika  =20
 
 > -----Original Message-----
 > From: kseitz@sources.redhat.com [mailto:kseitz@sources.redhat.com]=20
 > Sent: Thursday, February 21, 2008 2:32 AM
 > To: insight-prs@sources.redhat.com;=20
 > kseitz@sources.redhat.com; Arpa Monika; nobody@sources.redhat.com
 > Subject: Re: insight/328: Remote debugging - register window=20
 > does not get updated after download
 >=20
 > Synopsis: Remote debugging - register window does not get=20
 > updated after download
 >=20
 > Responsible-Changed-From-To: unassigned->kseitz
 > Responsible-Changed-By: kseitz
 > Responsible-Changed-When: Thu Feb 21 01:31:32 2008
 > Responsible-Changed-Why:
 >     mine
 > State-Changed-From-To: open->analyzed
 > State-Changed-By: kseitz
 > State-Changed-When: Thu Feb 21 01:31:32 2008
 > State-Changed-Why:
 >     Yeah, that sounds like a problem. I'll bet an event is=20
 > not being properly generated when after the attach and/or=20
 > download happens.
 >    =20
 >     Alas, it's been so long since I've used an embedded=20
 > target with gdb, that I don't exactly remember how all this=20
 > is supposed to work (e.g., where exactly the event is=20
 > supposed to get generated)...
 >    =20
 >     Before I make some suggestions on how to fix this, I need=20
 > a little more information: Are you using the Run button to do=20
 > all of this, or are you using either the console window=20
 > (typing "target ..." and "load") or the Run menu options? I=20
 > *think* that if you use the Run button, this should work.=20
 > I'll bet it does not work for the other cases because of the=20
 > command-line/GUI disconnect from which Insight suffers.
 >=20
 > http://sourceware.org/cgi-bin/gnatsweb.pl?cmd=3Dview%20audit-tra
 > il&database=3Dinsight&pr=3D328
 >=20