How to properly run insight for eCos application?

["ariga masahiro" <ariga@link-lab.co.jp>]

[-- Attachment #1: Type: text/plain, Size: 4880 bytes --]

Hello everyone,

I do not know how to properly run insight for eCos application.
Would you please teach me ?

I started to run insight like next on cygwin prompt.
LINK@ariga ~/ether_test_plus_simplemain-O1
$ sh-elf-insight.exe nc_test_slave.o

Then insight's source window appeared showing nc_test_slave.c.
In order to break at sure point,I set breakpoint at top of cyg_start 
function.
Red square mark was shown.
Then I clicked Running-Man icon,and DownLoading began and next log appeared 
in console window.

0x8000acb2 in ?? ()
Loading section .text.cyg_start, size 0x2a0 lma 0x0
Loading section .text.pexit, size 0x38 lma 0x0
Loading section .rodata, size 0x3b0 lma 0x0
Loading section .text.do_udp_test, size 0x65c lma 0x0
Loading section .text.do_read, size 0xe0 lma 0x0
Loading section .data.slave_tcp_port.3876, size 0x4 lma 0x0
Loading section .text.do_tcp_test, size 0x620 lma 0x0
Loading section .text.nc_slave, size 0x4f8 lma 0x0
Loading section .text.net_test, size 0x68 lma 0x0
Loading section .text.simple_program, size 0xdc lma 0x0
Loading section .text.calibrate_load, size 0x50c lma 0x0
Loading section .text.start_load, size 0x104 lma 0x0
Loading section .text.net_load, size 0x9c lma 0x0
Loading section .text.do_some_random_computation, size 0x78 lma 0x0
Loading section .text.net_idle, size 0x4c lma 0x0
Loading section .text.test_delay, size 0x38 lma 0x0
Start address 0x0, load size 8652
Transfer rate: 3 KB/sec, 298 bytes/write.
(gdb)

When Download finished,"Make breakpoint pending on future shared library 
load?" window poped up (why).
I clicked "NO",then transfered to running state,Running-Man icon changing to 
STOP icon,
and down in Source Window "Program is running" appeared.
But never breaked at breakpoint I would like to stop.
I wonder where I was wrong?

I also tried to GDB remote debugging.
Although it became nearly the same result,I appended log below.

--  this is GDB remote debugging log
LINK@ariga ~/ether_test_plus_simplemain-O1
$ sh-elf-gdb nc_test_slave.o
GNU gdb 6.7.1
Copyright (C) 2007 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later 
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "--host=i686-pc-cygwin --target=sh-elf"...
(gdb) set debug remote 1
(gdb) set remotelogfile test-9.txt
(gdb) set remotebaud 38400
(gdb) target remote /dev/com2
Remote debugging using /dev/com2
Sending packet: $qSupported#37...Ack
Packet received:
Packet qSupported (supported-packets) is NOT supported
Sending packet: $Hc-1#09...Ack
Packet received: OK
Sending packet: $qC#b4...Ack
Packet received: E02
Sending packet: $qOffsets#4b...Ack
Packet received:
Sending packet: $?#3f...Ack
Packet received: S05
Sending packet: $Hg0#df...Ack
Packet received: OK
Sending packet: $g#67...Ack
Packet received: 
40000101ffffff0f40000101400001f18000aca400000005000000060000000
700000008000000090000000a0000000b0000000c0000000d8ffecf948ffecf948000acb28000cf0
e42df3e8480000000000000000000000040000101000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000040000101ffffff0f40000101400001f18000aca
40000000500000006000000070000000000000000000000000000000000000000000000000000000
000000000
0x8000acb2 in ?? ()
Sending packet: $qSymbol::#5b...Ack
Packet received:
Packet qSymbol (symbol-lookup) is NOT supported
(gdb) b cyg_start
Breakpoint 1 at 0x1f38: file nc_test_slave.c, line 721.    --- breakpoint 
was set.
(gdb)
(gdb)load
  |
 here appeared lot of binary code.
  |
Loading section .text.test_delay, size 0x38 lma 0x0
Sending packet: $X0,38:/覦"\177・

[-- Attachment #2: test-9.txt.gz --]
[-- Type: application/x-gzip, Size: 14385 bytes --]