* How to set target's baud rate as 115200 in insight!
@ 2001-04-17 4:10 Cliff Tsai
2001-04-17 7:38 ` Fernando Nasser
0 siblings, 1 reply; 3+ messages in thread
From: Cliff Tsai @ 2001-04-17 4:10 UTC (permalink / raw)
To: insight
Hi:
When using "insight" to set target.I only see baud rate from 9600 to
57600.
Can I set is as 115200?
And where to set stop bit(1 or 2 bit) and data bit(7 or 8 bits).
Thanks!
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: How to set target's baud rate as 115200 in insight!
2001-04-17 4:10 How to set target's baud rate as 115200 in insight! Cliff Tsai
@ 2001-04-17 7:38 ` Fernando Nasser
2001-04-17 17:58 ` Cliff Tsai
0 siblings, 1 reply; 3+ messages in thread
From: Fernando Nasser @ 2001-04-17 7:38 UTC (permalink / raw)
To: Cliff Tsai; +Cc: insight
Cliff Tsai wrote:
>
> Hi:
>
> When using "insight" to set target.I only see baud rate from 9600 to
> 57600.
> Can I set is as 115200?
The newer versions (snapshots) have the 115200 speed in the list of baud rates.
> And where to set stop bit(1 or 2 bit) and data bit(7 or 8 bits).
>
GDB does not have an option for this, so Insight does not either. If you want to know why GDB does not have this option and if there is a way to circumvent your problem, ask in the gdb@sources.redhat.com.
--
Fernando Nasser
Red Hat - Toronto E-Mail: fnasser@redhat.com
2323 Yonge Street, Suite #300
Toronto, Ontario M4P 2C9
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: How to set target's baud rate as 115200 in insight!
2001-04-17 7:38 ` Fernando Nasser
@ 2001-04-17 17:58 ` Cliff Tsai
0 siblings, 0 replies; 3+ messages in thread
From: Cliff Tsai @ 2001-04-17 17:58 UTC (permalink / raw)
To: Fernando Nasser; +Cc: insight
Hi:
If GDB use 1-stop bit,8-bits data and no parity as default?
thanks!
----- Original Message -----
From: "Fernando Nasser" <fnasser@cygnus.com>
To: "Cliff Tsai" <clifftsai@minecard.com.tw>
Cc: <insight@sources.redhat.com>
Sent: Tuesday, April 17, 2001 10:38 PM
Subject: Re: How to set target's baud rate as 115200 in insight!
> Cliff Tsai wrote:
> >
> > Hi:
> >
> > When using "insight" to set target.I only see baud rate from 9600 to
> > 57600.
> > Can I set is as 115200?
>
> The newer versions (snapshots) have the 115200 speed in the list of baud
rates.
>
>
> > And where to set stop bit(1 or 2 bit) and data bit(7 or 8 bits).
> >
>
> GDB does not have an option for this, so Insight does not either. If you
want to know why GDB does not have this option and if there is a way to
circumvent your problem, ask in the gdb@sources.redhat.com.
>
> --
> Fernando Nasser
> Red Hat - Toronto E-Mail: fnasser@redhat.com
> 2323 Yonge Street, Suite #300
> Toronto, Ontario M4P 2C9
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-04-17 17:58 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-04-17 4:10 How to set target's baud rate as 115200 in insight! Cliff Tsai
2001-04-17 7:38 ` Fernando Nasser
2001-04-17 17:58 ` Cliff Tsai
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).