From mboxrd@z Thu Jan  1 00:00:00 1970
From: morten.larsen@acte.no
To: ahare@btinternet.com
Cc: insight@sourceware.cygnus.com
Subject: RE: configuring for arm-elf-gdb
Date: Mon, 13 Mar 2000 06:11:00 -0000
Message-id: <00Mar13.150648cet.115201@blue.acte.no>
X-SW-Source: 2000-q1/msg00138.html

Hi,

as I am fairly new to (cross)GCC and GDB/Insight (using ARM's SDT
previously), 
I wonder if you have examples of the following:

1) Makefile for build&install of the board support routines supplied by
Atmel 
(unless you use your own ...)

2) Linker script for linking the support library (from 1)) w. user program.

Even a fragment or skeleton of any of these would help ...
(besides, can GCC be instructed to generate Thumb-specific code?)

-Thanks

Rgds:
Morten Larsen,
ACTE Norway AS

-----Original Message-----
From: Andy Hare [ mailto:ahare@btinternet.com ]
Sent: Monday, March 06, 2000 11:05 PM
To: javelina
Cc: Insight Mail list
Subject: Re: configuring for arm-elf-gdb


Hi

    I have been building Insight-GDB under cygnus b20.1 under NT. Below is
the following rules extracted from a makefile that I use to build all the
GNU toolset.

.PHONY: config-insight
config-insight:
 cd /c/cygnus/build/insight ; \
 rm * -r ; \
 /c/cygnus/GNU-Source-Code/insight/configure -v \
  --prefix=/c/cygnus/xgcc-arm/insight \
  --exec-prefix=/c/cygnus/xgcc-arm/insight \
  --host=i586-cygwin32 --target=arm-elf >configure.out

.PHONY: clean-insight
clean-insight:
 cd /c/cygnus/build/insight ; \
 make clean

.PHONY: insight
insight:
 cd /c/cygnus/build/insight ; \
 make -w all install LIBGCC2_DEBUG_CFLAGS="-g1 -O1"  LANGUAGES="c c++" >
make.out 2>&1

These allow me to configure and build the Insight system, I have been using
it both in the simulator mode and to connect to the ATMEL EB01 eval. board.

Andy Hare

----- Original Message -----
From: javelina <javelina@home.com>
To: <insight@sourceware.cygnus.com>
Sent: Sunday, March 05, 2000 9:14 PM
Subject: configuring for arm-elf-gdb


> Greetings,
>
> I am an ecos user and I would like to use the insight package to do GUI
> remote debugging on an ARM evaluation board.  Looking at the mailing
> list archive, it appears that others have done this, but it is not clear
> to me what the steps are to build "arm-elf-gdb" instead of "gdb".
>
> Thanks,
> L3
>
>