From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Lewin A.R.W. Edwards" To: Daniel.Andersson@combitechsystems.com Cc: insight@sourceware.cygnus.com Subject: RE: Angel not present Date: Tue, 20 Mar 2001 05:41:00 -0000 Message-id: <4.3.2.7.2.20010320083824.02a22210@mail.larwe.com> References: <2253171AF143D21185A60000F8FA748B02DA4BF5@pluto.combitech.se> X-SW-Source: 2001-q1/msg00341.html >Yes, you were right, i was running an old version on gdb. Now that i have >upgraded the gdb i can connect to the target (using "target rdi"), but only >with 9600. Is this some form of maximum using angel? Is it possible to >download a gdb stub so that i can increase the debugging speed, and if so, Angel will work at up to 115200bps (at least); I've _once or twice_ successfully connected at that speed. However it is not reliable above 9600, at least not with gdb on the host end. You can try it, though getting a real gdb stub in there is preferable. What board are you using? If it is a custom platform you will need to port your own gdb stub. I have limited experience with Angel but my experience so far tells me it's very fragile. === Lewin A.R.W. Edwards (Embedded Engineer) Work: http://www.digi-frame.com/ Personal: http://www.zws.com/ and http://www.larwe.com/ "Und setzet ihr nicht das Leben ein, Nie wird euch das Leben gewonnen sein."