From: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
To: libc-alpha@sourceware.org, caiyinyu <caiyinyu@loongson.cn>
Cc: joseph_myers@mentor.com
Subject: Re: [PATCH v6 11/13] LoongArch: Build Infastructure
Date: Wed, 13 Jul 2022 14:48:01 -0300 [thread overview]
Message-ID: <028ff59b-3904-a335-04d3-c8ac34970d3f@linaro.org> (raw)
In-Reply-To: <20220708065255.2316410-12-caiyinyu@loongson.cn>
Looks ok, some comments below.
On 08/07/22 03:52, caiyinyu wrote:
> ---
> sysdeps/loongarch/Implies | 3 +
> sysdeps/loongarch/Makefile | 15 ++
> sysdeps/loongarch/configure | 5 +
> sysdeps/loongarch/configure.ac | 6 +
> sysdeps/loongarch/lp64/Implies-after | 1 +
> sysdeps/loongarch/nptl/Makefile | 21 +++
> sysdeps/loongarch/preconfigure | 52 ++++++
> sysdeps/loongarch/preconfigure.ac | 46 +++++
> sysdeps/loongarch/sys/regdef.h | 93 ++++++++++
> sysdeps/unix/sysv/linux/loongarch/Implies | 1 +
> sysdeps/unix/sysv/linux/loongarch/Makefile | 4 +
> sysdeps/unix/sysv/linux/loongarch/configure | 174 ++++++++++++++++++
> .../unix/sysv/linux/loongarch/configure.ac | 22 +++
> .../unix/sysv/linux/loongarch/ldd-rewrite.sed | 3 +
> .../unix/sysv/linux/loongarch/lp64/Implies | 3 +
> .../unix/sysv/linux/loongarch/shlib-versions | 7 +
> 16 files changed, 456 insertions(+)
> create mode 100644 sysdeps/loongarch/Implies
> create mode 100644 sysdeps/loongarch/Makefile
> create mode 100644 sysdeps/loongarch/configure
> create mode 100644 sysdeps/loongarch/configure.ac
> create mode 100644 sysdeps/loongarch/lp64/Implies-after
> create mode 100644 sysdeps/loongarch/nptl/Makefile
> create mode 100644 sysdeps/loongarch/preconfigure
> create mode 100644 sysdeps/loongarch/preconfigure.ac
> create mode 100644 sysdeps/loongarch/sys/regdef.h
> create mode 100644 sysdeps/unix/sysv/linux/loongarch/Implies
> create mode 100644 sysdeps/unix/sysv/linux/loongarch/Makefile
> create mode 100644 sysdeps/unix/sysv/linux/loongarch/configure
> create mode 100644 sysdeps/unix/sysv/linux/loongarch/configure.ac
> create mode 100644 sysdeps/unix/sysv/linux/loongarch/ldd-rewrite.sed
> create mode 100644 sysdeps/unix/sysv/linux/loongarch/lp64/Implies
> create mode 100644 sysdeps/unix/sysv/linux/loongarch/shlib-versions
>
> diff --git a/sysdeps/loongarch/Implies b/sysdeps/loongarch/Implies
> new file mode 100644
> index 0000000000..1945b1f4bb
> --- /dev/null
> +++ b/sysdeps/loongarch/Implies
> @@ -0,0 +1,3 @@
> +ieee754/ldbl-128
> +ieee754/dbl-64
> +ieee754/flt-32
> diff --git a/sysdeps/loongarch/Makefile b/sysdeps/loongarch/Makefile
> new file mode 100644
> index 0000000000..41c3449670
> --- /dev/null
> +++ b/sysdeps/loongarch/Makefile
> @@ -0,0 +1,15 @@
> +ifeq ($(subdir),misc)
> +sysdep_headers += sys/asm.h
> +endif
> +
> +# LoongArch's assembler also needs to know about PIC as it changes the
> +# definition of some assembler macros.
> +ASFLAGS-.os += $(pic-ccflag)
> +
> +abi-variants := lp64
> +
> +ifeq (,$(filter $(default-abi),$(abi-variants)))
> +$(error Unknown ABI $(default-abi), must be one of $(abi-variants))
> +endif
> +
> +abi-lp64-condition := defined __loongarch_lp64
> diff --git a/sysdeps/loongarch/configure b/sysdeps/loongarch/configure
> new file mode 100644
> index 0000000000..43b54d4965
> --- /dev/null
> +++ b/sysdeps/loongarch/configure
> @@ -0,0 +1,5 @@
> +# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> + # Local configure fragment for sysdeps/loongarch/elf.
> +
> +$as_echo "#define HIDDEN_VAR_NEEDS_DYNAMIC_RELOC 1" >>confdefs.h
> +
> diff --git a/sysdeps/loongarch/configure.ac b/sysdeps/loongarch/configure.ac
> new file mode 100644
> index 0000000000..f744367bf3
> --- /dev/null
> +++ b/sysdeps/loongarch/configure.ac
> @@ -0,0 +1,6 @@
> +GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> +# Local configure fragment for sysdeps/loongarch/elf.
> +
> +dnl It is always possible to access static and hidden symbols in an
> +dnl position independent way.
> +AC_DEFINE(HIDDEN_VAR_NEEDS_DYNAMIC_RELOC)
> diff --git a/sysdeps/loongarch/lp64/Implies-after b/sysdeps/loongarch/lp64/Implies-after
> new file mode 100644
> index 0000000000..a8cae95f9d
> --- /dev/null
> +++ b/sysdeps/loongarch/lp64/Implies-after
> @@ -0,0 +1 @@
> +wordsize-64
> diff --git a/sysdeps/loongarch/nptl/Makefile b/sysdeps/loongarch/nptl/Makefile
> new file mode 100644
> index 0000000000..e73bbf3e21
> --- /dev/null
> +++ b/sysdeps/loongarch/nptl/Makefile
> @@ -0,0 +1,21 @@
> +# Makefile for sysdeps/loongarch/nptl.
> +# Copyright (C) 2022 Free Software Foundation, Inc.
> +# This file is part of the GNU C Library.
> +#
> +# The GNU C Library is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU Lesser General Public
> +# License as published by the Free Software Foundation; either
> +# version 2.1 of the License, or (at your option) any later version.
> +#
> +# The GNU C Library is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> +# Lesser General Public License for more details.
> +#
> +# You should have received a copy of the GNU Lesser General Public
> +# License along with the GNU C Library; if not, see
> +# <https://www.gnu.org/licenses/>.
> +
> +ifeq ($(subdir),csu)
> +gen-as-const-headers += tcb-offsets.sym
> +endif
loongarch does not need this header (you can build glibc if you remove it).
> diff --git a/sysdeps/loongarch/preconfigure b/sysdeps/loongarch/preconfigure
> new file mode 100644
> index 0000000000..489af6f0b7
> --- /dev/null
> +++ b/sysdeps/loongarch/preconfigure
> @@ -0,0 +1,52 @@
> +# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> +# Local preconfigure fragment for sysdeps/loongarch
> +
> +case "$machine" in
> +loongarch*)
> +
> + grlen=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null | sed -n 's/^#define __loongarch_grlen \(.*\)/\1/p'`
> + float_abi=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null | sed -n 's/^#define __loongarch_\(soft\|single\|double\)_float.*/\1/p'`
> +
> + with_fp_cond="!defined __loongarch_soft_float"
> +
> + case "$float_abi" in
> + soft)
> + abi_flen=0
> + as_fn_error 1 "loongarch does not yet support soft floating-point ABI!!" "$LINENO" 5
> + ;;
> + single)
> + as_fn_error 1 "glibc does not yet support the single floating-point ABI!!" "$LINENO" 5
> + ;;
> + double)
> + abi_flen=64
> + ;;
> + *)
> + as_fn_error 1 "Unable to determine floating-point ABI!!" "$LINENO" 5
> + ;;
> + esac
> +
> + case "$grlen" in
> + 32)
> + as_fn_error 1 "loongarch does not yet support ilp32 ABI!!" "$LINENO" 5
> + ;;
> + 64)
> + machine=loongarch/lp64
> + ;;
> + *)
> + as_fn_error 1 "Unable to determine GRLEN!!" "$LINENO" 5
> + ;;
> + esac
> +
> + cat >>confdefs.h <<_ACEOF
> +#define LOONGARCH_ABI_GRLEN $grlen
> +_ACEOF
> +
> + cat >>confdefs.h <<_ACEOF
> +#define LOONGARCH_ABI_FRLEN $abi_flen
> +_ACEOF
> +
> +
> + base_machine=loongarch
> + ;;
> +esac
> +
> diff --git a/sysdeps/loongarch/preconfigure.ac b/sysdeps/loongarch/preconfigure.ac
> new file mode 100644
> index 0000000000..8eb94e9efe
> --- /dev/null
> +++ b/sysdeps/loongarch/preconfigure.ac
> @@ -0,0 +1,46 @@
> +GLIBC_PROVIDES[]dnl See aclocal.m4 in the top level source directory.
> +# Local preconfigure fragment for sysdeps/loongarch
> +
> +case "$machine" in
> +loongarch*)
> +
> + grlen=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null | sed -n 's/^#define __loongarch_grlen \(.*\)/\1/p'`
> + float_abi=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null | sed -n 's/^#define __loongarch_\(soft\|single\|double\)_float.*/\1/p'`
> +
> + with_fp_cond="!defined __loongarch_soft_float"
> +
> + case "$float_abi" in
> + soft)
> + abi_flen=0
> + AC_MSG_ERROR([loongarch does not yet support soft floating-point ABI!!], 1)
> + ;;
> + single)
> + AC_MSG_ERROR([glibc does not yet support the single floating-point ABI!!], 1)
> + ;;
> + double)
> + abi_flen=64
> + ;;
> + *)
> + AC_MSG_ERROR([Unable to determine floating-point ABI!!], 1)
> + ;;
> + esac
> +
> + case "$grlen" in
> + 32)
> + AC_MSG_ERROR([loongarch does not yet support ilp32 ABI!!], 1)
> + ;;
> + 64)
> + machine=loongarch/lp64
> + ;;
> + *)
> + AC_MSG_ERROR([Unable to determine GRLEN!!], 1)
> + ;;
> + esac
> +
> + AC_DEFINE_UNQUOTED([LOONGARCH_ABI_GRLEN], [$grlen])
> + AC_DEFINE_UNQUOTED([LOONGARCH_ABI_FRLEN], [$abi_flen])
> +
> + base_machine=loongarch
> + ;;
> +esac
> +
> diff --git a/sysdeps/loongarch/sys/regdef.h b/sysdeps/loongarch/sys/regdef.h
> new file mode 100644
> index 0000000000..d266df372d
> --- /dev/null
> +++ b/sysdeps/loongarch/sys/regdef.h
> @@ -0,0 +1,93 @@
> +/* Register Macro definitions
> + Copyright (C) 2022 Free Software Foundation, Inc.
> + This file is part of the GNU C Library.
> +
> +
> + The GNU C Library is free software; you can redistribute it and/or
> + modify it under the terms of the GNU Lesser General Public
> + License as published by the Free Software Foundation; either
> + version 2.1 of the License, or (at your option) any later version.
> +
> + The GNU C Library is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + Lesser General Public License for more details.
> +
> + You should have received a copy of the GNU Lesser General Public
> + License along with the GNU C Library. If not, see
> + <https://www.gnu.org/licenses/>. */
> +
> +#ifndef _SYS_REGDEF_H
> +#define _SYS_REGDEF_H
> +
> +#define zero $r0
> +#define ra $r1
> +#define tp $r2
> +#define sp $r3
> +#define a0 $r4
> +#define a1 $r5
> +#define a2 $r6
> +#define a3 $r7
> +#define a4 $r8
> +#define a5 $r9
> +#define a6 $r10
> +#define a7 $r11
> +#define v0 $r4
> +#define v1 $r5
> +#define t0 $r12
> +#define t1 $r13
> +#define t2 $r14
> +#define t3 $r15
> +#define t4 $r16
> +#define t5 $r17
> +#define t6 $r18
> +#define t7 $r19
> +#define t8 $r20
> +#define x $r21
> +#define fp $r22
> +#define s0 $r23
> +#define s1 $r24
> +#define s2 $r25
> +#define s3 $r26
> +#define s4 $r27
> +#define s5 $r28
> +#define s6 $r29
> +#define s7 $r30
> +#define s8 $r31
> +
> +#define fa0 $f0
> +#define fa1 $f1
> +#define fa2 $f2
> +#define fa3 $f3
> +#define fa4 $f4
> +#define fa5 $f5
> +#define fa6 $f6
> +#define fa7 $f7
> +#define fv0 $f0
> +#define fv1 $f1
> +#define ft0 $f8
> +#define ft1 $f9
> +#define ft2 $f10
> +#define ft3 $f11
> +#define ft4 $f12
> +#define ft5 $f13
> +#define ft6 $f14
> +#define ft7 $f15
> +#define ft8 $f16
> +#define ft9 $f17
> +#define ft10 $f18
> +#define ft11 $f19
> +#define ft12 $f20
> +#define ft13 $f21
> +#define ft14 $f22
> +#define ft15 $f23
> +#define fs0 $f24
> +#define fs1 $f25
> +#define fs2 $f26
> +#define fs3 $f27
> +#define fs4 $f28
> +#define fs5 $f29
> +#define fs6 $f30
> +#define fs7 $f31
> +
> +#endif /* _SYS_REGDEF_H */
> diff --git a/sysdeps/unix/sysv/linux/loongarch/Implies b/sysdeps/unix/sysv/linux/loongarch/Implies
> new file mode 100644
> index 0000000000..e52b1ac310
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/loongarch/Implies
> @@ -0,0 +1 @@
> +loongarch/nptl
> diff --git a/sysdeps/unix/sysv/linux/loongarch/Makefile b/sysdeps/unix/sysv/linux/loongarch/Makefile
> new file mode 100644
> index 0000000000..730bfa7465
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/loongarch/Makefile
> @@ -0,0 +1,4 @@
> +ifeq ($(subdir),stdlib)
> +gen-as-const-headers += ucontext_i.sym
> +endif
> +
> diff --git a/sysdeps/unix/sysv/linux/loongarch/configure b/sysdeps/unix/sysv/linux/loongarch/configure
> new file mode 100644
> index 0000000000..54ccd1528e
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/loongarch/configure
> @@ -0,0 +1,174 @@
> +# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
> + # Local configure fragment for sysdeps/unix/sysv/linux/loongarch.
> +
> +arch_minimum_kernel=5.19.0
> +
> +libc_cv_loongarch_int_abi=no
> +
> +
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
> +$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
> +if ${ac_cv_path_GREP+:} false; then :
> + $as_echo_n "(cached) " >&6
> +else
> + if test -z "$GREP"; then
> + ac_path_GREP_found=false
> + # Loop through the user's path and test for each of PROGNAME-LIST
> + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
> +do
> + IFS=$as_save_IFS
> + test -z "$as_dir" && as_dir=.
> + for ac_prog in grep ggrep; do
> + for ac_exec_ext in '' $ac_executable_extensions; do
> + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
> + as_fn_executable_p "$ac_path_GREP" || continue
> +# Check for GNU ac_path_GREP and select it if it is found.
> + # Check for GNU $ac_path_GREP
> +case `"$ac_path_GREP" --version 2>&1` in
> +*GNU*)
> + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
> +*)
> + ac_count=0
> + $as_echo_n 0123456789 >"conftest.in"
> + while :
> + do
> + cat "conftest.in" "conftest.in" >"conftest.tmp"
> + mv "conftest.tmp" "conftest.in"
> + cp "conftest.in" "conftest.nl"
> + $as_echo 'GREP' >> "conftest.nl"
> + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
> + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
> + as_fn_arith $ac_count + 1 && ac_count=$as_val
> + if test $ac_count -gt ${ac_path_GREP_max-0}; then
> + # Best one so far, save it but keep looking for a better one
> + ac_cv_path_GREP="$ac_path_GREP"
> + ac_path_GREP_max=$ac_count
> + fi
> + # 10*(2^10) chars as input seems more than enough
> + test $ac_count -gt 10 && break
> + done
> + rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
> +esac
> +
> + $ac_path_GREP_found && break 3
> + done
> + done
> + done
> +IFS=$as_save_IFS
> + if test -z "$ac_cv_path_GREP"; then
> + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
> + fi
> +else
> + ac_cv_path_GREP=$GREP
> +fi
> +
> +fi
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
> +$as_echo "$ac_cv_path_GREP" >&6; }
> + GREP="$ac_cv_path_GREP"
> +
> +
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
> +$as_echo_n "checking for egrep... " >&6; }
> +if ${ac_cv_path_EGREP+:} false; then :
> + $as_echo_n "(cached) " >&6
> +else
> + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
> + then ac_cv_path_EGREP="$GREP -E"
> + else
> + if test -z "$EGREP"; then
> + ac_path_EGREP_found=false
> + # Loop through the user's path and test for each of PROGNAME-LIST
> + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
> +do
> + IFS=$as_save_IFS
> + test -z "$as_dir" && as_dir=.
> + for ac_prog in egrep; do
> + for ac_exec_ext in '' $ac_executable_extensions; do
> + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
> + as_fn_executable_p "$ac_path_EGREP" || continue
> +# Check for GNU ac_path_EGREP and select it if it is found.
> + # Check for GNU $ac_path_EGREP
> +case `"$ac_path_EGREP" --version 2>&1` in
> +*GNU*)
> + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
> +*)
> + ac_count=0
> + $as_echo_n 0123456789 >"conftest.in"
> + while :
> + do
> + cat "conftest.in" "conftest.in" >"conftest.tmp"
> + mv "conftest.tmp" "conftest.in"
> + cp "conftest.in" "conftest.nl"
> + $as_echo 'EGREP' >> "conftest.nl"
> + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
> + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
> + as_fn_arith $ac_count + 1 && ac_count=$as_val
> + if test $ac_count -gt ${ac_path_EGREP_max-0}; then
> + # Best one so far, save it but keep looking for a better one
> + ac_cv_path_EGREP="$ac_path_EGREP"
> + ac_path_EGREP_max=$ac_count
> + fi
> + # 10*(2^10) chars as input seems more than enough
> + test $ac_count -gt 10 && break
> + done
> + rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
> +esac
> +
> + $ac_path_EGREP_found && break 3
> + done
> + done
> + done
> +IFS=$as_save_IFS
> + if test -z "$ac_cv_path_EGREP"; then
> + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
> + fi
> +else
> + ac_cv_path_EGREP=$EGREP
> +fi
> +
> + fi
> +fi
> +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
> +$as_echo "$ac_cv_path_EGREP" >&6; }
> + EGREP="$ac_cv_path_EGREP"
> +
> +
> +cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> +/* end confdefs.h. */
> +__SIZEOF_INT__ __SIZEOF_LONG__ __SIZEOF_POINTER__
> +
> +_ACEOF
> +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
> + $EGREP "4 8 8" >/dev/null 2>&1; then :
> + libc_cv_loongarch_int_abi=lp64
> +fi
> +rm -f conftest*
> +
> +if test $libc_cv_loongarch_int_abi = no; then
> + as_fn_error $? "Unable to determine integer ABI" "$LINENO" 5
> +fi
> +
> +config_vars="$config_vars
> +default-abi = $libc_cv_loongarch_int_abi"
> +
> +case $libc_cv_loongarch_int_abi in
> +lp64)
> + test -n "$libc_cv_slibdir" ||
> +case "$prefix" in
> +/usr | /usr/)
> + libc_cv_slibdir='/lib64'
> + libc_cv_rtlddir='/lib64'
> + if test "$libdir" = '${exec_prefix}/lib'; then
> + libdir='${exec_prefix}/lib64';
> + # Locale data can be shared between 32-bit and 64-bit libraries.
> + libc_cv_complocaledir='${exec_prefix}/lib/locale'
> + fi
> + ;;
> +esac
> + ;;
> +esac
> +
> +ldd_rewrite_script=sysdeps/unix/sysv/linux/loongarch/ldd-rewrite.sed
> diff --git a/sysdeps/unix/sysv/linux/loongarch/configure.ac b/sysdeps/unix/sysv/linux/loongarch/configure.ac
> new file mode 100644
> index 0000000000..07da5eed76
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/loongarch/configure.ac
> @@ -0,0 +1,22 @@
> +sinclude(./aclocal.m4)dnl Autoconf lossage
> +GLIBC_PROVIDES dnl See aclocal.m4 in the top level source directory.
> +# Local configure fragment for sysdeps/unix/sysv/linux/loongarch.
> +
> +arch_minimum_kernel=5.19.0
> +
> +libc_cv_loongarch_int_abi=no
> +AC_EGREP_CPP(4 8 8, [__SIZEOF_INT__ __SIZEOF_LONG__ __SIZEOF_POINTER__
> + ], libc_cv_loongarch_int_abi=lp64)
> +if test $libc_cv_loongarch_int_abi = no; then
> + AC_MSG_ERROR([Unable to determine integer ABI])
> +fi
> +
> +LIBC_CONFIG_VAR([default-abi], [$libc_cv_loongarch_int_abi])
> +
> +case $libc_cv_loongarch_int_abi in
> +lp64)
> + LIBC_SLIBDIR_RTLDDIR([lib64], [lib64])
> + ;;
> +esac
> +
> +ldd_rewrite_script=sysdeps/unix/sysv/linux/loongarch/ldd-rewrite.sed
> diff --git a/sysdeps/unix/sysv/linux/loongarch/ldd-rewrite.sed b/sysdeps/unix/sysv/linux/loongarch/ldd-rewrite.sed
> new file mode 100644
> index 0000000000..d42a13e08c
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/loongarch/ldd-rewrite.sed
> @@ -0,0 +1,3 @@
> +/LD_TRACE_LOADED_OBJECTS=1/a\
> +add_env="$add_env LD_LIBRARY_VERSION=\\$verify_out"
This LD_LIBRARY_VERSION is not supported anymore (I forgot to remove them
from ldd-rewrite.sed files).
> +s_^\(RTLDLIST=\)\(.*lib\)\(\|64\|32\)\(/[^/]*\)\(-loongarch\)\(64\|32\)\(\.so\.[0-9.]*\)[[:blank:]]*$_\1"\2\4\7 \264\4-loongarch64\7 \232\4-loongarch32\7"_
> diff --git a/sysdeps/unix/sysv/linux/loongarch/lp64/Implies b/sysdeps/unix/sysv/linux/loongarch/lp64/Implies
> new file mode 100644
> index 0000000000..117c2b8efe
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/loongarch/lp64/Implies
> @@ -0,0 +1,3 @@
> +unix/sysv/linux/loongarch
> +unix/sysv/linux/generic
> +unix/sysv/linux/wordsize-64
> diff --git a/sysdeps/unix/sysv/linux/loongarch/shlib-versions b/sysdeps/unix/sysv/linux/loongarch/shlib-versions
> new file mode 100644
> index 0000000000..dc2220b4be
> --- /dev/null
> +++ b/sysdeps/unix/sysv/linux/loongarch/shlib-versions
> @@ -0,0 +1,7 @@
> +DEFAULT GLIBC_2.36
> +
> +%if LOONGARCH_ABI_GRLEN == 64 && LOONGARCH_ABI_FRLEN == 64
> +ld=ld-linux-loongarch-lp64d.so.1
> +%else
> +%error cannot determine ABI
> +%endif
next prev parent reply other threads:[~2022-07-13 17:48 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-08 6:52 [PATCH v6 00/13] GLIBC LoongArch PATCHES caiyinyu
2022-07-08 6:52 ` [PATCH v6 01/13] LoongArch: Update NEWS and README for the LoongArch port caiyinyu
2022-07-12 11:06 ` Adhemerval Zanella Netto
2022-07-08 6:52 ` [PATCH v6 02/13] LoongArch: Add LoongArch entries to config.h.in caiyinyu
2022-07-12 18:51 ` Adhemerval Zanella Netto
2022-07-08 6:52 ` [PATCH v6 03/13] LoongArch: Add relocations and ELF flags to elf.h and scripts/glibcelf.py caiyinyu
2022-07-12 19:27 ` Adhemerval Zanella Netto
2022-07-08 6:52 ` [PATCH v6 04/13] LoongArch: ABI Implementation caiyinyu
2022-07-12 20:39 ` Adhemerval Zanella Netto
2022-07-15 1:46 ` caiyinyu
2022-07-08 6:52 ` [PATCH v6 05/13] LoongArch: Thread-Local Storage Support caiyinyu
2022-07-13 13:10 ` Adhemerval Zanella Netto
2022-07-08 6:52 ` [PATCH v6 06/13] LoongArch: Generic <math.h> and soft-fp Routines caiyinyu
2022-07-13 13:25 ` Adhemerval Zanella Netto
2022-07-08 6:52 ` [PATCH v6 07/13] LoongArch: Atomic and Locking Routines caiyinyu
2022-07-13 13:53 ` Adhemerval Zanella Netto
2022-07-15 1:46 ` caiyinyu
2022-07-08 6:52 ` [PATCH v6 08/13] LoongArch: Linux Syscall Interface caiyinyu
2022-07-13 16:19 ` Adhemerval Zanella Netto
2023-09-13 11:05 ` caiyinyu
2022-07-08 6:52 ` [PATCH v6 09/13] LoongArch: Linux ABI caiyinyu
2022-07-13 16:35 ` Adhemerval Zanella Netto
2022-07-15 1:48 ` caiyinyu
2022-07-08 6:52 ` [PATCH v6 10/13] LoongArch: Add ABI Lists caiyinyu
2022-07-13 17:12 ` Adhemerval Zanella Netto
2022-07-08 6:52 ` [PATCH v6 11/13] LoongArch: Build Infastructure caiyinyu
2022-07-13 3:07 ` Xi Ruoyao
2022-07-13 3:43 ` WANG Xuerui
2022-07-13 7:51 ` caiyinyu
2022-07-13 17:48 ` Adhemerval Zanella Netto [this message]
2022-07-15 1:49 ` caiyinyu
2022-07-08 6:52 ` [PATCH v6 12/13] LoongArch: Hard Float Support caiyinyu
2022-07-13 19:22 ` Adhemerval Zanella Netto
2022-07-14 13:00 ` caiyinyu
2022-07-08 7:13 ` [PATCH v6 00/13] GLIBC LoongArch PATCHES Xi Ruoyao
2022-07-08 7:15 ` Xi Ruoyao
2022-07-13 19:55 ` Adhemerval Zanella Netto
2022-07-14 11:33 ` Xi Ruoyao
2022-07-14 12:11 ` Adhemerval Zanella Netto
2022-07-18 13:54 ` Carlos O'Donell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=028ff59b-3904-a335-04d3-c8ac34970d3f@linaro.org \
--to=adhemerval.zanella@linaro.org \
--cc=caiyinyu@loongson.cn \
--cc=joseph_myers@mentor.com \
--cc=libc-alpha@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).