From: Lukasz Majewski <lukma@denx.de>
To: Joseph Myers <joseph@codesourcery.com>,
Adhemerval Zanella <adhemerval.zanella@linaro.org>
Cc: Florian Weimer <fweimer@redhat.com>,
GNU C Library <libc-alpha@sourceware.org>
Subject: Re: [PATCH v2] tst: Provide test for getrusage
Date: Tue, 13 Apr 2021 10:30:55 +0200 [thread overview]
Message-ID: <20210413103055.5ec6e118@jawa> (raw)
In-Reply-To: <20210331145105.2c9a0c5e@jawa>
[-- Attachment #1: Type: text/plain, Size: 4889 bytes --]
Dear Community,
> Dear Community,
>
> > This commit adds test to check if getrusage works correctly. As the
> > first check - if the wrong 'who' parameter causes errno set to
> > EINVAL.
> >
> > Next for the ru_{us}time.tv_usec fields it is checked if they are in
> > microseconds range.
> >
> > The last check is to perform busy wait loop for 10ms and afterwards
> > assess if ru_{us}time.tv_sec are not smaller than values read on the
> > test start.
> >
> > Changes for v2:
> > - Add check for EINVAL return value
> > - Check if getrusage ru_{su}time.tv_usec are in correct microseconds
> > range
> > - Busy wait for 10ms and then compare getrusage system and user
> > times (in seconds) if they are equal or larger than previous ones
>
> Gentle ping on this patch. Are there any more comments?
Are there any more comments regarding this patch?
>
> > ---
> > resource/Makefile | 2 +-
> > resource/tst-getrusage.c | 67
> > ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 68
> > insertions(+), 1 deletion(-) create mode 100644
> > resource/tst-getrusage.c
> >
> > diff --git a/resource/Makefile b/resource/Makefile
> > index bd9e716749..e236df3d7c 100644
> > --- a/resource/Makefile
> > +++ b/resource/Makefile
> > @@ -25,6 +25,6 @@ headers := sys/resource.h bits/resource.h
> > sys/vlimit.h \ routines := getrlimit setrlimit getrlimit64
> > setrlimit64 getrusage ulimit \ vlimit vtimes getpriority
> > setpriority nice
> > -tests = tst-getrlimit bug-ulimit1
> > +tests = tst-getrlimit bug-ulimit1 tst-getrusage
> >
> > include ../Rules
> > diff --git a/resource/tst-getrusage.c b/resource/tst-getrusage.c
> > new file mode 100644
> > index 0000000000..da721b0613
> > --- /dev/null
> > +++ b/resource/tst-getrusage.c
> > @@ -0,0 +1,67 @@
> > +/* Test for getrusage.
> > + Copyright (C) 2021 Free Software Foundation, Inc.
> > + This file is part of the GNU C Library.
> > +
> > + The GNU C Library is free software; you can redistribute it
> > and/or
> > + modify it under the terms of the GNU Lesser General Public
> > + License as published by the Free Software Foundation; either
> > + version 2.1 of the License, or (at your option) any later
> > version. +
> > + The GNU C Library is distributed in the hope that it will be
> > useful,
> > + but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > GNU
> > + Lesser General Public License for more details.
> > +
> > + You should have received a copy of the GNU Lesser General Public
> > + License along with the GNU C Library; if not, see
> > + <https://www.gnu.org/licenses/>. */
> > +
> > +#include <time.h>
> > +#include <errno.h>
> > +#include <sys/resource.h>
> > +#include <support/check.h>
> > +#include <support/timespec.h>
> > +
> > +static int
> > +do_test (void)
> > +{
> > + struct timespec tv_then, tv_now, r;
> > + struct rusage ru, ru_then;
> > + int ret;
> > +
> > + /* Check for invalid 'who' parameter. */
> > + ret = getrusage (-100, &ru);
> > + if (! (ret == -1 && errno == EINVAL))
> > + FAIL_EXIT1 ("getrusage failed - EINVAL expected\n");
> > +
> > + /* Check if ru_stime.tv_usec and ru_utime.tv_usec are correct.
> > */
> > + ret = getrusage (RUSAGE_SELF, &ru_then);
> > + if (ret == -1)
> > + FAIL_EXIT1 ("getrusage failed: %m\n");
> > +
> > + TEST_VERIFY (ru_then.ru_utime.tv_usec >= 0);
> > + TEST_VERIFY (ru_then.ru_utime.tv_usec < 1000000);
> > +
> > + TEST_VERIFY (ru_then.ru_stime.tv_usec >= 0);
> > + TEST_VERIFY (ru_then.ru_stime.tv_usec < 1000000);
> > +
> > + tv_then = xclock_now (CLOCK_REALTIME);
> > + /* Busy wait for 10 miliseconds. */
> > + do
> > + {
> > + tv_now = xclock_now (CLOCK_REALTIME);
> > + r = timespec_sub (tv_now, tv_then);
> > + }
> > + while (r.tv_nsec <= 10000000);
> > +
> > + ret = getrusage (RUSAGE_SELF, &ru);
> > + if (ret == -1)
> > + FAIL_EXIT1 ("getrusage failed: %m\n");
> > +
> > + TEST_VERIFY (ru.ru_utime.tv_sec >= ru_then.ru_utime.tv_sec);
> > + TEST_VERIFY (ru.ru_stime.tv_sec >= ru_then.ru_stime.tv_sec);
> > +
> > + return 0;
> > +}
> > +
> > +#include <support/test-driver.c>
>
>
>
>
> Best regards,
>
> Lukasz Majewski
>
> --
>
> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> lukma@denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma@denx.de
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
next prev parent reply other threads:[~2021-04-13 8:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-23 14:35 Lukasz Majewski
2021-03-31 12:51 ` Lukasz Majewski
2021-04-13 8:30 ` Lukasz Majewski [this message]
2021-05-06 9:12 ` Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210413103055.5ec6e118@jawa \
--to=lukma@denx.de \
--cc=adhemerval.zanella@linaro.org \
--cc=fweimer@redhat.com \
--cc=joseph@codesourcery.com \
--cc=libc-alpha@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).