From: Noah Goldstein <goldstein.w.n@gmail.com>
To: libc-alpha@sourceware.org
Subject: [PATCH v1 11/23] x86: Remove strspn-sse2.S and use the generic implementation
Date: Wed, 23 Mar 2022 16:57:29 -0500 [thread overview]
Message-ID: <20220323215734.3927131-11-goldstein.w.n@gmail.com> (raw)
In-Reply-To: <20220323215734.3927131-1-goldstein.w.n@gmail.com>
The generic implementation is faster.
geometric_mean(N=20) of all benchmarks New / Original: .710
All string/memory tests pass.
---
Geomtric Mean N=20 runs; All functions page aligned
len, align1, align2, pos, New Time / Old Time
1, 0, 0, 512, 0.824
1, 1, 0, 512, 1.018
1, 0, 1, 512, 0.986
1, 1, 1, 512, 1.092
2, 0, 0, 512, 0.86
2, 2, 0, 512, 0.868
2, 0, 2, 512, 0.858
2, 2, 2, 512, 0.857
3, 0, 0, 512, 0.836
3, 3, 0, 512, 0.849
3, 0, 3, 512, 0.84
3, 3, 3, 512, 0.85
4, 0, 0, 512, 0.843
4, 4, 0, 512, 0.837
4, 0, 4, 512, 0.835
4, 4, 4, 512, 0.846
5, 0, 0, 512, 0.852
5, 5, 0, 512, 0.848
5, 0, 5, 512, 0.85
5, 5, 5, 512, 0.85
6, 0, 0, 512, 0.853
6, 6, 0, 512, 0.855
6, 0, 6, 512, 0.853
6, 6, 6, 512, 0.853
7, 0, 0, 512, 0.857
7, 7, 0, 512, 0.861
7, 0, 7, 512, 0.94
7, 7, 7, 512, 0.856
8, 0, 0, 512, 0.927
8, 0, 8, 512, 0.965
9, 0, 0, 512, 0.967
9, 1, 0, 512, 0.976
9, 0, 9, 512, 0.887
9, 1, 9, 512, 0.881
10, 0, 0, 512, 0.853
10, 2, 0, 512, 0.846
10, 0, 10, 512, 0.855
10, 2, 10, 512, 0.849
11, 0, 0, 512, 0.854
11, 3, 0, 512, 0.855
11, 0, 11, 512, 0.85
11, 3, 11, 512, 0.854
12, 0, 0, 512, 0.864
12, 4, 0, 512, 0.864
12, 0, 12, 512, 0.867
12, 4, 12, 512, 0.87
13, 0, 0, 512, 0.853
13, 5, 0, 512, 0.841
13, 0, 13, 512, 0.837
13, 5, 13, 512, 0.85
14, 0, 0, 512, 0.838
14, 6, 0, 512, 0.842
14, 0, 14, 512, 0.818
14, 6, 14, 512, 0.845
15, 0, 0, 512, 0.799
15, 7, 0, 512, 0.847
15, 0, 15, 512, 0.787
15, 7, 15, 512, 0.84
16, 0, 0, 512, 0.824
16, 0, 16, 512, 0.827
17, 0, 0, 512, 0.817
17, 1, 0, 512, 0.823
17, 0, 17, 512, 0.82
17, 1, 17, 512, 0.814
18, 0, 0, 512, 0.81
18, 2, 0, 512, 0.833
18, 0, 18, 512, 0.811
18, 2, 18, 512, 0.842
19, 0, 0, 512, 0.823
19, 3, 0, 512, 0.818
19, 0, 19, 512, 0.821
19, 3, 19, 512, 0.824
20, 0, 0, 512, 0.814
20, 4, 0, 512, 0.818
20, 0, 20, 512, 0.806
20, 4, 20, 512, 0.802
21, 0, 0, 512, 0.835
21, 5, 0, 512, 0.839
21, 0, 21, 512, 0.842
21, 5, 21, 512, 0.82
22, 0, 0, 512, 0.824
22, 6, 0, 512, 0.831
22, 0, 22, 512, 0.819
22, 6, 22, 512, 0.824
23, 0, 0, 512, 0.816
23, 7, 0, 512, 0.856
23, 0, 23, 512, 0.808
23, 7, 23, 512, 0.848
24, 0, 0, 512, 0.88
24, 0, 24, 512, 0.846
25, 0, 0, 512, 0.929
25, 1, 0, 512, 0.917
25, 0, 25, 512, 0.884
25, 1, 25, 512, 0.859
26, 0, 0, 512, 0.919
26, 2, 0, 512, 0.867
26, 0, 26, 512, 0.914
26, 2, 26, 512, 0.845
27, 0, 0, 512, 0.919
27, 3, 0, 512, 0.864
27, 0, 27, 512, 0.917
27, 3, 27, 512, 0.847
28, 0, 0, 512, 0.905
28, 4, 0, 512, 0.896
28, 0, 28, 512, 0.898
28, 4, 28, 512, 0.871
29, 0, 0, 512, 0.911
29, 5, 0, 512, 0.91
29, 0, 29, 512, 0.905
29, 5, 29, 512, 0.884
30, 0, 0, 512, 0.907
30, 6, 0, 512, 0.802
30, 0, 30, 512, 0.906
30, 6, 30, 512, 0.818
31, 0, 0, 512, 0.907
31, 7, 0, 512, 0.821
31, 0, 31, 512, 0.89
31, 7, 31, 512, 0.787
4, 0, 0, 32, 0.623
4, 1, 0, 32, 0.606
4, 0, 1, 32, 0.6
4, 1, 1, 32, 0.603
4, 0, 0, 64, 0.731
4, 2, 0, 64, 0.733
4, 0, 2, 64, 0.734
4, 2, 2, 64, 0.755
4, 0, 0, 128, 0.822
4, 3, 0, 128, 0.873
4, 0, 3, 128, 0.89
4, 3, 3, 128, 0.907
4, 0, 0, 256, 0.827
4, 4, 0, 256, 0.811
4, 0, 4, 256, 0.794
4, 4, 4, 256, 0.814
4, 5, 0, 512, 0.841
4, 0, 5, 512, 0.831
4, 5, 5, 512, 0.845
4, 0, 0, 1024, 0.861
4, 6, 0, 1024, 0.857
4, 0, 6, 1024, 0.9
4, 6, 6, 1024, 0.861
4, 0, 0, 2048, 0.879
4, 7, 0, 2048, 0.875
4, 0, 7, 2048, 0.883
4, 7, 7, 2048, 0.88
10, 1, 0, 64, 0.747
10, 1, 1, 64, 0.743
10, 2, 0, 64, 0.732
10, 2, 2, 64, 0.729
10, 3, 0, 64, 0.747
10, 3, 3, 64, 0.733
10, 4, 0, 64, 0.74
10, 4, 4, 64, 0.751
10, 5, 0, 64, 0.735
10, 5, 5, 64, 0.746
10, 6, 0, 64, 0.735
10, 6, 6, 64, 0.733
10, 7, 0, 64, 0.734
10, 7, 7, 64, 0.74
6, 0, 0, 0, 0.377
6, 0, 0, 1, 0.369
6, 0, 1, 1, 0.383
6, 0, 0, 2, 0.391
6, 0, 2, 2, 0.394
6, 0, 0, 3, 0.416
6, 0, 3, 3, 0.411
6, 0, 0, 4, 0.475
6, 0, 4, 4, 0.483
6, 0, 0, 5, 0.473
6, 0, 5, 5, 0.476
6, 0, 0, 6, 0.459
6, 0, 6, 6, 0.445
6, 0, 0, 7, 0.433
6, 0, 7, 7, 0.432
6, 0, 0, 8, 0.492
6, 0, 8, 8, 0.494
6, 0, 0, 9, 0.476
6, 0, 9, 9, 0.483
6, 0, 0, 10, 0.46
6, 0, 10, 10, 0.476
6, 0, 0, 11, 0.463
6, 0, 11, 11, 0.463
6, 0, 0, 12, 0.511
6, 0, 12, 12, 0.515
6, 0, 0, 13, 0.506
6, 0, 13, 13, 0.536
6, 0, 0, 14, 0.496
6, 0, 14, 14, 0.484
6, 0, 0, 15, 0.473
6, 0, 15, 15, 0.475
6, 0, 0, 16, 0.534
6, 0, 16, 16, 0.534
6, 0, 0, 17, 0.525
6, 0, 17, 17, 0.523
6, 0, 0, 18, 0.522
6, 0, 18, 18, 0.524
6, 0, 0, 19, 0.512
6, 0, 19, 19, 0.514
6, 0, 0, 20, 0.535
6, 0, 20, 20, 0.54
6, 0, 0, 21, 0.543
6, 0, 21, 21, 0.536
6, 0, 0, 22, 0.542
6, 0, 22, 22, 0.542
6, 0, 0, 23, 0.529
6, 0, 23, 23, 0.53
6, 0, 0, 24, 0.596
6, 0, 24, 24, 0.589
6, 0, 0, 25, 0.583
6, 0, 25, 25, 0.58
6, 0, 0, 26, 0.574
6, 0, 26, 26, 0.58
6, 0, 0, 27, 0.575
6, 0, 27, 27, 0.558
6, 0, 0, 28, 0.606
6, 0, 28, 28, 0.606
6, 0, 0, 29, 0.589
6, 0, 29, 29, 0.595
6, 0, 0, 30, 0.592
6, 0, 30, 30, 0.585
6, 0, 0, 31, 0.585
6, 0, 31, 31, 0.579
6, 0, 0, 32, 0.625
6, 0, 32, 32, 0.615
6, 0, 0, 33, 0.615
6, 0, 33, 33, 0.61
6, 0, 0, 34, 0.604
6, 0, 34, 34, 0.6
6, 0, 0, 35, 0.602
6, 0, 35, 35, 0.608
6, 0, 0, 36, 0.644
6, 0, 36, 36, 0.644
6, 0, 0, 37, 0.658
6, 0, 37, 37, 0.651
6, 0, 0, 38, 0.644
6, 0, 38, 38, 0.649
6, 0, 0, 39, 0.626
6, 0, 39, 39, 0.632
6, 0, 0, 40, 0.662
6, 0, 40, 40, 0.661
6, 0, 0, 41, 0.656
6, 0, 41, 41, 0.655
6, 0, 0, 42, 0.643
6, 0, 42, 42, 0.637
6, 0, 0, 43, 0.622
6, 0, 43, 43, 0.628
6, 0, 0, 44, 0.673
6, 0, 44, 44, 0.687
6, 0, 0, 45, 0.661
6, 0, 45, 45, 0.659
6, 0, 0, 46, 0.657
6, 0, 46, 46, 0.653
6, 0, 0, 47, 0.658
6, 0, 47, 47, 0.65
6, 0, 0, 48, 0.678
6, 0, 48, 48, 0.683
6, 0, 0, 49, 0.676
6, 0, 49, 49, 0.661
6, 0, 0, 50, 0.672
6, 0, 50, 50, 0.662
6, 0, 0, 51, 0.656
6, 0, 51, 51, 0.659
6, 0, 0, 52, 0.682
6, 0, 52, 52, 0.686
6, 0, 0, 53, 0.67
6, 0, 53, 53, 0.674
6, 0, 0, 54, 0.663
6, 0, 54, 54, 0.675
6, 0, 0, 55, 0.662
6, 0, 55, 55, 0.665
6, 0, 0, 56, 0.681
6, 0, 56, 56, 0.697
6, 0, 0, 57, 0.686
6, 0, 57, 57, 0.687
6, 0, 0, 58, 0.701
6, 0, 58, 58, 0.693
6, 0, 0, 59, 0.709
6, 0, 59, 59, 0.698
6, 0, 0, 60, 0.708
6, 0, 60, 60, 0.708
6, 0, 0, 61, 0.709
6, 0, 61, 61, 0.716
6, 0, 0, 62, 0.709
6, 0, 62, 62, 0.707
6, 0, 0, 63, 0.703
6, 0, 63, 63, 0.716
.../{strspn-sse2.S => strspn-sse2.c} | 8 +-
sysdeps/x86_64/strspn.S | 112 ------------------
2 files changed, 4 insertions(+), 116 deletions(-)
rename sysdeps/x86_64/multiarch/{strspn-sse2.S => strspn-sse2.c} (86%)
delete mode 100644 sysdeps/x86_64/strspn.S
diff --git a/sysdeps/x86_64/multiarch/strspn-sse2.S b/sysdeps/x86_64/multiarch/strspn-sse2.c
similarity index 86%
rename from sysdeps/x86_64/multiarch/strspn-sse2.S
rename to sysdeps/x86_64/multiarch/strspn-sse2.c
index e0a095f25a..61cc6cb0a5 100644
--- a/sysdeps/x86_64/multiarch/strspn-sse2.S
+++ b/sysdeps/x86_64/multiarch/strspn-sse2.c
@@ -1,4 +1,4 @@
-/* strspn optimized with SSE2.
+/* strspn.
Copyright (C) 2017-2022 Free Software Foundation, Inc.
This file is part of the GNU C Library.
@@ -19,10 +19,10 @@
#if IS_IN (libc)
# include <sysdep.h>
-# define strspn __strspn_sse2
+# define STRSPN __strspn_sse2
# undef libc_hidden_builtin_def
-# define libc_hidden_builtin_def(strspn)
+# define libc_hidden_builtin_def(STRSPN)
#endif
-#include <sysdeps/x86_64/strspn.S>
+#include <string/strspn.c>
diff --git a/sysdeps/x86_64/strspn.S b/sysdeps/x86_64/strspn.S
deleted file mode 100644
index 61b76ee0a1..0000000000
--- a/sysdeps/x86_64/strspn.S
+++ /dev/null
@@ -1,112 +0,0 @@
-/* strspn (str, ss) -- Return the length of the initial segment of STR
- which contains only characters from SS.
- For AMD x86-64.
- Copyright (C) 1994-2022 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with the GNU C Library; if not, see
- <https://www.gnu.org/licenses/>. */
-
-#include <sysdep.h>
-
- .text
-ENTRY (strspn)
-
- movq %rdi, %rdx /* Save SRC. */
-
- /* First we create a table with flags for all possible characters.
- For the ASCII (7bit/8bit) or ISO-8859-X character sets which are
- supported by the C string functions we have 256 characters.
- Before inserting marks for the stop characters we clear the whole
- table. */
- movq %rdi, %r8 /* Save value. */
- subq $256, %rsp /* Make space for 256 bytes. */
- cfi_adjust_cfa_offset(256)
- movl $32, %ecx /* 32*8 bytes = 256 bytes. */
- movq %rsp, %rdi
- xorl %eax, %eax /* We store 0s. */
- cld
- rep
- stosq
-
- movq %rsi, %rax /* Setup stopset. */
-
-/* For understanding the following code remember that %rcx == 0 now.
- Although all the following instruction only modify %cl we always
- have a correct zero-extended 64-bit value in %rcx. */
-
- .p2align 4
-L(2): movb (%rax), %cl /* get byte from stopset */
- testb %cl, %cl /* is NUL char? */
- jz L(1) /* yes => start compare loop */
- movb %cl, (%rsp,%rcx) /* set corresponding byte in stopset table */
-
- movb 1(%rax), %cl /* get byte from stopset */
- testb $0xff, %cl /* is NUL char? */
- jz L(1) /* yes => start compare loop */
- movb %cl, (%rsp,%rcx) /* set corresponding byte in stopset table */
-
- movb 2(%rax), %cl /* get byte from stopset */
- testb $0xff, %cl /* is NUL char? */
- jz L(1) /* yes => start compare loop */
- movb %cl, (%rsp,%rcx) /* set corresponding byte in stopset table */
-
- movb 3(%rax), %cl /* get byte from stopset */
- addq $4, %rax /* increment stopset pointer */
- movb %cl, (%rsp,%rcx) /* set corresponding byte in stopset table */
- testb $0xff, %cl /* is NUL char? */
- jnz L(2) /* no => process next dword from stopset */
-
-L(1): leaq -4(%rdx), %rax /* prepare loop */
-
- /* We use a neat trick for the following loop. Normally we would
- have to test for two termination conditions
- 1. a character in the stopset was found
- and
- 2. the end of the string was found
- But as a sign that the character is in the stopset we store its
- value in the table. But the value of NUL is NUL so the loop
- terminates for NUL in every case. */
-
- .p2align 4
-L(3): addq $4, %rax /* adjust pointer for full loop round */
-
- movb (%rax), %cl /* get byte from string */
- testb %cl, (%rsp,%rcx) /* is it contained in skipset? */
- jz L(4) /* no => return */
-
- movb 1(%rax), %cl /* get byte from string */
- testb %cl, (%rsp,%rcx) /* is it contained in skipset? */
- jz L(5) /* no => return */
-
- movb 2(%rax), %cl /* get byte from string */
- testb %cl, (%rsp,%rcx) /* is it contained in skipset? */
- jz L(6) /* no => return */
-
- movb 3(%rax), %cl /* get byte from string */
- testb %cl, (%rsp,%rcx) /* is it contained in skipset? */
- jnz L(3) /* yes => start loop again */
-
- incq %rax /* adjust pointer */
-L(6): incq %rax
-L(5): incq %rax
-
-L(4): addq $256, %rsp /* remove stopset */
- cfi_adjust_cfa_offset(-256)
- subq %rdx, %rax /* we have to return the number of valid
- characters, so compute distance to first
- non-valid character */
- ret
-END (strspn)
-libc_hidden_builtin_def (strspn)
--
2.25.1
next prev parent reply other threads:[~2022-03-23 22:01 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-23 21:57 [PATCH v1 01/23] benchtests: Use json-lib in bench-strchr.c Noah Goldstein
2022-03-23 21:57 ` [PATCH v1 02/23] benchtests: Add random benchmark " Noah Goldstein
2022-03-24 18:44 ` H.J. Lu
2022-03-23 21:57 ` [PATCH v1 03/23] x86: Code cleanup in strchr-avx2 and comment justifying branch Noah Goldstein
2022-03-24 18:53 ` H.J. Lu
2022-03-24 19:20 ` Noah Goldstein
2022-03-24 19:36 ` H.J. Lu
2022-05-12 19:31 ` Sunil Pandey
2022-03-23 21:57 ` [PATCH v1 04/23] x86: Code cleanup in strchr-evex " Noah Goldstein
2022-03-24 18:54 ` H.J. Lu
2022-05-12 19:32 ` Sunil Pandey
2022-03-23 21:57 ` [PATCH v1 05/23] benchtests: Use json-lib in bench-strpbrk.c Noah Goldstein
2022-03-24 18:54 ` H.J. Lu
2022-03-23 21:57 ` [PATCH v1 06/23] benchtests: Use json-lib in bench-strspn.c Noah Goldstein
2022-03-24 18:54 ` H.J. Lu
2022-03-23 21:57 ` [PATCH v1 07/23] x86: Optimize strcspn and strpbrk in strcspn-c.c Noah Goldstein
2022-03-24 18:55 ` H.J. Lu
2022-05-12 19:34 ` Sunil Pandey
2022-03-23 21:57 ` [PATCH v1 08/23] x86: Optimize strspn in strspn-c.c Noah Goldstein
2022-03-24 18:56 ` H.J. Lu
2022-05-12 19:39 ` Sunil Pandey
2022-03-23 21:57 ` [PATCH v1 09/23] x86: Remove strcspn-sse2.S and use the generic implementation Noah Goldstein
2022-03-24 18:57 ` H.J. Lu
2022-05-12 19:40 ` Sunil Pandey
2022-03-23 21:57 ` [PATCH v1 10/23] x86: Remove strpbrk-sse2.S " Noah Goldstein
2022-03-24 18:57 ` H.J. Lu
2022-05-12 19:41 ` Sunil Pandey
2022-03-23 21:57 ` Noah Goldstein [this message]
2022-03-24 18:57 ` [PATCH v1 11/23] x86: Remove strspn-sse2.S " H.J. Lu
2022-05-12 19:42 ` Sunil Pandey
2022-03-23 21:57 ` [PATCH v1 12/23] x86: Fix fallback for wcsncmp_avx2 in strcmp-avx2.S [BZ #28896] Noah Goldstein
2022-03-24 18:59 ` H.J. Lu
2022-03-24 19:18 ` Noah Goldstein
2022-03-24 19:34 ` H.J. Lu
2022-03-24 19:39 ` Noah Goldstein
2022-03-24 20:50 ` [PATCH v2 12/31] " Noah Goldstein
2022-03-24 21:26 ` H.J. Lu
2022-03-24 21:43 ` Noah Goldstein
2022-03-24 21:58 ` H.J. Lu
2022-05-04 6:05 ` Sunil Pandey
2022-03-23 21:57 ` [PATCH v1 13/23] benchtests: Use json-lib in bench-strcasecmp.c Noah Goldstein
2022-03-24 19:00 ` H.J. Lu
2022-03-23 21:57 ` [PATCH v1 14/23] benchtests: Use json-lib in bench-strncasecmp.c Noah Goldstein
2022-03-24 19:00 ` H.J. Lu
2022-03-23 21:57 ` [PATCH v1 15/23] string: Expand page cross tests in test-strcasecmp.c Noah Goldstein
2022-03-24 19:01 ` H.J. Lu
2022-03-23 21:57 ` [PATCH v1 16/23] string: Expand page cross tests in test-strncasecmp.c Noah Goldstein
2022-03-24 19:01 ` H.J. Lu
2022-03-23 21:57 ` [PATCH v1 17/23] x86: Optimize str{n}casecmp TOLOWER logic in strcmp.S Noah Goldstein
2022-03-24 19:02 ` H.J. Lu
2022-05-12 19:44 ` Sunil Pandey
2022-03-23 21:57 ` [PATCH v1 18/23] x86: Optimize str{n}casecmp TOLOWER logic in strcmp-sse42.S Noah Goldstein
2022-03-24 19:02 ` H.J. Lu
2022-05-12 19:45 ` Sunil Pandey
2022-03-23 21:57 ` [PATCH v1 19/23] string: Expand page cross test cases in test-strcmp.c Noah Goldstein
2022-03-24 19:02 ` H.J. Lu
2022-03-23 21:57 ` [PATCH v1 20/23] string: Expand page cross test cases in test-strncmp.c Noah Goldstein
2022-03-24 19:02 ` H.J. Lu
2022-03-23 21:57 ` [PATCH v1 21/23] x86: Add AVX2 optimized str{n}casecmp Noah Goldstein
2022-03-24 19:03 ` H.J. Lu
2022-03-24 22:41 ` [PATCH v3 " Noah Goldstein
2022-03-24 22:41 ` [PATCH v3 22/23] x86: Add EVEX " Noah Goldstein
2022-03-24 23:56 ` [PATCH v4 21/23] x86: Add AVX2 " Noah Goldstein
2022-03-24 23:56 ` [PATCH v4 22/23] x86: Add EVEX " Noah Goldstein
2022-03-25 18:15 ` H.J. Lu
2022-03-25 18:18 ` Noah Goldstein
2022-05-12 19:47 ` Sunil Pandey
2022-05-12 19:52 ` Sunil Pandey
2022-03-25 18:14 ` [PATCH v4 21/23] x86: Add AVX2 " H.J. Lu
2022-05-12 19:52 ` Sunil Pandey
2022-03-23 21:57 ` [PATCH v1 22/23] x86: Add EVEX " Noah Goldstein
2022-03-24 19:04 ` H.J. Lu
2022-03-23 21:57 ` [PATCH v1 23/23] x86: Remove AVX str{n}casecmp Noah Goldstein
2022-03-24 19:04 ` H.J. Lu
2022-05-12 19:54 ` Sunil Pandey
2022-03-24 18:43 ` [PATCH v1 01/23] benchtests: Use json-lib in bench-strchr.c H.J. Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220323215734.3927131-11-goldstein.w.n@gmail.com \
--to=goldstein.w.n@gmail.com \
--cc=libc-alpha@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).